[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.96-tegra (buildbrain@mobile-u64-1072) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Wed Nov 9 19:42:57 PST 2016
[    0.000000] CPU: Cortex A57 Processor [411fd071] revision 1
[    0.000000] alternative: enabling workaround for ARM erratum 832075
[    0.000000] Machine: jetson_tx1
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] Reserved memory: initialized node iram-carveout, compatible id nvidia,iram-carveout
[    0.000000] Tegra reserved memory:
               LP0:                    ff2bf000 - ff2bffff
               Bootloader framebuffer: 00000000 - 00000000
               Bootloader framebuffer2: 00000000 - 00000000
               Framebuffer:            00000000 - 00000000
               2nd Framebuffer:        00000000 - 00000000
               Carveout:               00000000 - 00000000
               Vpr:                    00000000 - 00000000
               Tsec:                   00000000 - 00000000
               Bootloader Debug Data:  00000000 - 00000000
[    0.000000] Nvdumper:               ff23f000 - ff23ffff
[    0.000000] cma: CMA: reserved 16 MiB at fdc00000
[    0.000000] On node 0 totalpages: 1043968
[    0.000000]   DMA32 zone: 7168 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 519680 pages, LIFO batch:31
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 524288 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/arch/arm64/boot/dts/tegra210-jetson-tx1-p2597-2180-a01-devkit.dts
[    0.000000] DTB Build time: Nov  9 2016 19:40:03
[    0.000000] Tegra21: Speedo/IDDQ fuse revision 4
[    0.000000] Tegra21: CPU Speedo ID 7, Soc Speedo ID 0, Gpu Speedo ID 2
[    0.000000] Tegra21: CPU Process ID 0, Soc Process ID 0, Gpu Process ID 0
[    0.000000] Tegra21: CPU Speedo value 2015, Soc Speedo value 1917, Gpu Speedo value 2006
[    0.000000] Tegra21: CPU IDDQ 1868, Soc IDDQ 2064, Gpu IDDQ 2545
[    0.000000] Tegra Revision: A02 SKU: 0x17 CPU Process: 0 Core Process: 0 Bootrom patch v0x3f
[    0.000000] tegra: PLLP fixed rate: 408000000
[    0.000000] pll_u: boot with h/w control already set
[    0.000000] pll_x boot misc1 0x0 : expected 0x20
[    0.000000]  (comparison mask = 0xffffff)
[    0.000000] pll_c4 rates match 204000000 max sdmmc: vco=998400000 out0=998400000 out3=998400000
[    0.000000] Lowering vic03 maximum rate from 1000000000 to 627200000
[    0.000000] Lowering nvjpg maximum rate from 1000000000 to 627200000
[    0.000000] Lowering se maximum rate from 1000000000 to 627200000
[    0.000000] Lowering tsecb maximum rate from 1000000000 to 627200000
[    0.000000] Lowering msenc maximum rate from 1000000000 to 716800000
[    0.000000] Lowering nvdec maximum rate from 1000000000 to 716800000
[    0.000000] Lowering vi maximum rate from 1000000000 to 793600000
[    0.000000] Lowering isp maximum rate from 1000000000 to 793600000
[    0.000000] Lowering adsp_bus maximum rate from 1200000000 to 844800000
[    0.000000] Lowering sbus maximum rate from 600000000 to 408000000
[    0.000000] Lowering host1x maximum rate from 600000000 to 408000000
[    0.000000] Lowering pll_c maximum rate from 1200000000 to 1130000000
[    0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1130000000
[    0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1130000000
[    0.000000] Lowering pll_d2 maximum rate from 1500000000 to 1130000000
[    0.000000] Lowering pll_dp maximum rate from 1500000000 to 1130000000
[    0.000000] Lowering sor0 maximum rate from 600000000 to 540000000
[    0.000000] Lowering sor1 maximum rate from 600000000 to 594000000
[    0.000000] Lowering dmic1 maximum rate from 12288000 to 12190000
[    0.000000] Lowering dmic2 maximum rate from 12288000 to 12190000
[    0.000000] Lowering dmic3 maximum rate from 12288000 to 12190000
[    0.000000] Lowering hda maximum rate from 102000000 to 51000000
[    0.000000] Lowering sdmmc2 maximum rate from 266000000 to 204000000
[    0.000000] Lowering qspi maximum rate from 163200000 to 116600000
[    0.000000] Lowering gbus maximum rate from 1300000000 to 998400000
[    0.000000] Lowering cpu_g maximum rate from 3000000000 to 1734000000
[    0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1132800000
[    0.000000] tegra dvfs: vdd_cpu: nominal 1226mV, offset 708000uV, step 19200uV, scaling enabled
[    0.000000] tegra dvfs: vdd_core: nominal 1125mV, offset 0uV, step 12500uV, scaling enabled
[    0.000000] tegra dvfs: vdd_gpu: nominal 1120mV, offset 710000uV, step 10000uV, scaling enabled
[    0.000000] Tegra reset control registration success
[    0.000000] tegra_powergate_init: DONE
[    0.000000] PERCPU: Embedded 13 pages/cpu @ffffffc01fecf000 s20800 r8192 d24256 u53248
[    0.000000] pcpu-alloc: s20800 r8192 d24256 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1029632
[    0.000000] Kernel command line: fbcon=map:0 console=tty0 console=ttyS0,115200n8 androidboot.modem=none androidboot.serialno=P2180A00P00940c003fd androidboot.security=non-secure tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff2bf000 nvdumper_reserved=0xff23f000 core_edp_mv=1125 core_edp_ma=4000 gpt android.kerneltype=normal androidboot.touch_vendor_id=0 androidboot.touch_panel_id=63 androidboot.touch_feature=0 androidboot.bootreason=pmc:software_reset,pmic:0x0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 2030MB 2048MB = 4078MB total
[    0.000000] Memory: 4067000k/4067000k available, 108872k reserved
[    0.000000] Virtual kernel memory layout:
                   vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000   (245759 MB)
                   vmemmap : 0xffffffbc01c00000 - 0xffffffbc05400000   (    56 MB)
                   modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
                   memory  : 0xffffffc000000000 - 0xffffffc100000000   (  4096 MB)
                     .init : 0xffffffc00114f000 - 0xffffffc0011ba140   (   429 kB)
                     .text : 0xffffffc000080000 - 0xffffffc00114e3a4   ( 17209 kB)
                     .data : 0xffffffc0011ce000 - 0xffffffc00139e7f0   (  1858 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:704 nr_irqs:704 0
[    0.000000] the number of interrupt controllers found is 6
[    0.000000] Architected local timer running at 19.20MHz (phys).
[    0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.023490] Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=192000
[    0.032299] pid_max: default: 32768 minimum: 301
[    0.036989] Security Framework initialized
[    0.041022] Mount-cache hash table entries: 256
[    0.099508] Initializing cgroup subsys debug
[    0.101812] Initializing cgroup subsys memory
[    0.106149] Initializing cgroup subsys devices
[    0.110550] Initializing cgroup subsys freezer
[    0.114959] Initializing cgroup subsys net_cls
[    0.119378] Initializing cgroup subsys blkio
[    0.123632] Initializing cgroup subsys perf_event
[    0.128499] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[    0.170269] ftrace: Allocated trace_printk buffers
[    0.230804] Brought up 4 CPUs
[    0.231782] SMP: Total of 4 processors activated.
[    0.236474] alternatives: patching kernel code
[    0.243434] devtmpfs: initialized
[    0.253669] pinctrl core: initialized pinctrl subsystem
[    0.257122] regulator-dummy: ; Rail ON
[    0.260968] Initializing plugin-manager
[    0.264816] node /plugin-manager/fragment-e3326@0 match with board 3326-*
[    0.272417] NET: Registered protocol family 16
[    0.277560] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.283354] console [pstore-1] enabled
[    0.286284] ramoops: attached 0x200000@0xff03f000, ecc: 0/0
[    0.292107] I2C first dynamic bus number based on alias = 7
[    0.297408] cpuidle: using governor ladder
[    0.301456] cpuidle: using governor menu
[    0.306096] PMC: Setting PMIC interrupt active-low
[    0.310813] tegra-pmc device create success
[    0.314323] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
[    0.321479] Clear bootloader IO dpd settings
[    0.325713] PMC: configuring io pad defaults
[    0.330138] PMC: IO pad audio voltage is 1800000
[    0.334652] PMC: IO pad cam voltage is 1800000
[    0.339071] PMC: IO pad dbg voltage is 1800000
[    0.343500] PMC: IO pad dmic voltage is 1800000
[    0.347998] PMC: IO pad pex-ctrl voltage is 1800000
[    0.352860] PMC: IO pad spi voltage is 1800000
[    0.357271] PMC: IO pad uart voltage is 1800000
[    0.361786] PMC: IO pad bb voltage is 1800000
[    0.366111] PMC: IO pad audio-hv voltage is 1800000
[    0.370973] PMC: IO pad spi-hv voltage is 1800000
[    0.375645] PMC: IO pad gpio voltage is 1800000
[    0.380152] PMC: IO pad sdmmc3 voltage is 1800000
[    0.384739] PMC: IO pad pex-bias power is disable
[    0.389418] PMC: IO pad pex-clk1 power is disable
[    0.394107] PMC: IO pad pex-clk2 power is disable
[    0.398769] T210 pmc padctrl driver initialized
[    0.403318] T210 pmc config for bootrom command passed
[    0.409291] INFO: pinmux CLAMP_INPUTS_WHEN_TRISTATED: disabled
[    0.415955] clk_init_from_dt_table: clocks are set from t210-clk-init-table:clkinit-0
[    0.424071] platform tegra-carveouts.23: SMMU isn't ready yet
[    0.428318] platform tegra-carveouts.23: domain=ffffffc0fe239e58 allocates as[0]=ffffffc0fe1e80a8
[    0.436713] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
[    0.443272] bpmp: connect returned 0
[    0.446635] mapped MMIO address: 0xffffff8000038000 -> 0x70019000
[    0.452334] mapped MMIO address: 0xffffff800005e000 -> 0x7001c000
[    0.458382] mapped MMIO address: 0xffffff8000096000 -> 0x7001d000
[    0.465290] Wake16 for irq=34
[    0.472685] tegra210-pinctrl 700008d4.pinmux: lookup the user state drive not found
[    0.478348] tegra210-pinctrl 700008d4.pinmux: lookup the user state unused not found
[    0.486070] tegra210-pinctrl 700008d4.pinmux: Probed Tegra pinctrl driver
[    0.493185] GPIO chip tegra-gpio: created GPIO range 0->245 ==> 700008d4.pinmux PIN 0->245
[    0.501105] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name wlan-default
[    0.508607] tegra-gpio 6000d000.gpio: Initialising GPIO state 1: name camera_control
[    0.516338] tegra-gpio 6000d000.gpio: Initialising GPIO state 2: name camera-control
[    0.524080] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio
[    0.533536] Wake44 for irq=81
[    0.534532] Wake40 for irq=53
[    0.537454] Wake41 for irq=53
[    0.540400] Wake42 for irq=53
[    0.543346] Wake43 for irq=53
[    0.546660] platform 70006000.serial: domain=ffffffc0fe20b158 allocates as[0]=ffffffc0fe1e8110
[    0.555559] platform sound.27: domain=ffffffc0fe27ddd8 allocates as[0]=ffffffc0fe1e8178
[    0.564318] platform tegradc.1: domain=ffffffc0fe27d9d8 allocates as[0]=ffffffc0fe1e81e0
[    0.572419] platform gpu.0: domain=ffffffc0fe27d758 allocates as[0]=ffffffc0fe1e8248
[    0.578666] platform gpu.0: domain=ffffffc0fe27d758 allocates as[1]=ffffffc0fe1e82b0
[    0.586390] platform gpu.0: domain=ffffffc0fe27d758 allocates as[2]=ffffffc0fe1e8318
[    0.594094] platform gpu.0: domain=ffffffc0fe27d758 allocates as[3]=ffffffc0fe1e8380
[    0.603192] platform 1003000.pcie-controller: domain=ffffffc0fe27d558 allocates as[0]=ffffffc0fe1e83e8
[    0.612376] platform sdhci-tegra.3: domain=ffffffc0fe27d0d8 allocates as[0]=ffffffc0fe1e8450
[    0.619766] platform sdhci-tegra.0: domain=ffffffc0fe389dd8 allocates as[0]=ffffffc0fe1e84b8
[    0.628059] Wake39 for irq=52
[    0.636584] gpio wake52 for gpio=61
[    0.638286] gpio wake8 for gpio=58
[    0.641505] gpio wake8 for gpio=58
[    0.645681] irq: no irq domain found for /soctherm@0x700E2000 !
[    0.650874] irq: no irq domain found for /soctherm@0x700E2000 !
[    0.656772] board_info: id:sku:fab:major:minor = 0x0884:0x03e8:0x00:0x00:0x00
[    0.663758] PMC dt information non-NULL tegra_init_suspend
[    0.674168] Loading EMC tables...
[    0.675571] tegra: Using EMC sequence '21021' for Rev. 7 tables
[    0.681407] tegra: emc: Derated table is valid.
[    0.685898] Lowering emc maximum rate from 1800000000 to 1600000000
[    0.692147] tegra: validated EMC DFS table
[    0.701951] swapper/0 isomgr_init(): iso emc max clk=1600000KHz
[    0.705879] swapper/0 isomgr_init(): max_iso_bw=11520000KB
[    0.711532] vdso: 2 pages (1 code, 1 data) at base ffffffc0011d6000
[    0.717592] vdso32: 2 pages (1 code, 1 data) at base ffffffc0011d5000
[    0.724028] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.730926] nvdumper: last reboot was unknown
[    0.735088] nvdumper: set_dirty_state 0x2badface
[    0.740026] Tegra restart notifier registered.
[    0.751256] bio: create slab <bio-0> at 0
[    0.754572] vdd-ac-bat: 5000 mV ; Rail ON
[    0.757409] vdd-cpu-fixed: 1000 mV ; Rail ON
[    0.761977] vgaarb: loaded
[    0.764473] SCSI subsystem initialized
[    0.767949] libata version 3.00 loaded.
[    0.768073] usbcore: registered new interface driver usbfs
[    0.773423] usbcore: registered new interface driver hub
[    0.778739] usbcore: registered new device driver usb
[    0.784303] gpio wake33 for gpio=188
[    0.788533] regulator_get() failed for (1-0074,vcc), -19
[    0.792556] pca953x 1-0074: no regulator found for vcc. Assuming vcc is always powered
[    0.801119] gpio wake21 for gpio=89
[    0.803995] gpiochip_add: registered GPIOs 1008 to 1023 on device: tca9539
[    0.810991] regulator_get() failed for (1-0077,vcc), -19
[    0.816023] pca953x 1-0077: no regulator found for vcc. Assuming vcc is always powered
[    0.824594] gpio wake36 for gpio=202
[    0.827549] gpiochip_add: registered GPIOs 992 to 1007 on device: tca9539
[    0.834641] i2c i2c-3: of_i2c: modalias failure on /i2c@7000c700/prod-settings
[    0.842240] max77620 4-003c: CID0: 0xb3
[    0.845310] max77620 4-003c: CID1: 0x0f
[    0.849121] max77620 4-003c: CID2: 0x05
[    0.852950] max77620 4-003c: CID3: 0x59
[    0.856747] max77620 4-003c: CID4: 0x35
[    0.860574] max77620 4-003c: CID5: 0x80
[    0.864375] max77620 4-003c: MAX77620 PMIC OTP Version is 0x35
[    0.871510] max77620-pmic max77620-pmic: Consumer c2 does not have device name
[    0.878205] vdd_core: 600 <--> 1400 mV at 1000 mV with ramp delay 27500 uV/us ; Rail ON
[    0.885988] vddio-ddr: at 1125 mV with ramp delay 27500 uV/us ; Rail ON
[    0.892306] vdd-pre-reg: 1350 mV with ramp delay 27500 uV/us ; Rail ON
[    0.899275] vdd-1v8: 1800 mV with ramp delay 27500 uV/us ; Rail ON
[    0.905132] avdd-sys: 1200 mV with ramp delay 100000 uV/us ; Rail ON
[    0.910905] avdd-sys: supplied by vdd-pre-reg
[    0.915603] vdd-pex: 1050 mV with ramp delay 100000 uV/us ; Rail ON
[    0.921462] vdd-pex: supplied by vdd-pre-reg
[    0.926017] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV with ramp delay 100000 uV/us ; Rail ON
[    0.934512] vdd-cam-hv: 2800 mV with ramp delay 100000 uV/us ; Rail OFF
[    0.941142] vdd-rtc: 850 mV with ramp delay 100000 uV/us ; Rail ON
[    0.947239] avdd-ts-hv: 3300 mV with ramp delay 100000 uV/us ; Rail OFF
[    0.954518] vdd-ts: 1800 mV with ramp delay 100000 uV/us ; Rail OFF
[    0.960311] vdd-gen-pll-edp: 1050 mV with ramp delay 100000 uV/us ; Rail ON
[    0.966692] vdd-gen-pll-edp: supplied by vdd-pre-reg
[    0.972155] vdd-hdmi-dp: 1050 mV with ramp delay 100000 uV/us ; Rail ON
[    0.978211] vdd-hdmi-dp: supplied by vdd-pre-reg
[    0.983105] max77620-gpio max77620-gpio.0: Initialising GPIO state 1: name gpio_default
[    0.990811] gpiochip_add: registered GPIOs 984 to 991 on device: max77620-gpio
[    0.999025] max77620-gpio max77620-gpio.0: max77620 gpio successfully initialized
[    1.008184] max77620 4-003c: max77620 probe successfully
[    1.012045] media: Linux media interface: v0.10
[    1.016032] Linux video capture interface: v2.00
[    1.021012] pps_core: LinuxPPS API ver. 1 registered
[    1.025541] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.034666] PTP clock support registered
[    1.038863] Tegra WDT enabled on probe. Timeout = 120 seconds.
[    1.044547] tegra_wdt 60005100.watchdog: tegra_wdt_probe done
[    1.051302] Advanced Linux Sound Architecture Driver Initialized.
[    1.056450] Bluetooth: Core ver 2.16
[    1.059706] NET: Registered protocol family 31
[    1.064122] Bluetooth: HCI device and connection manager initialized
[    1.070448] Bluetooth: HCI socket layer initialized
[    1.075289] Bluetooth: L2CAP socket layer initialized
[    1.080334] Bluetooth: SCO socket layer initialized
[    1.086200] vdd-3v3: 3300 mV ; Rail ON
[    1.089953] max77620-gpio7: 1050 mV ; Rail ON
[    1.093275] max77620-gpio7: supplied by vdd-gen-pll-edp
[    1.098636] lcd-bl-en: 1800 mV ; Rail ON
[    1.102507] en-vdd-sd: 3300 mV ; Rail OFF
[    1.106356] en-vdd-sd: supplied by vdd-3v3
[    1.110504] reg-fixed-sync-voltage 5.regulator: Consumer c1 does not have device name
[    1.118542] en-vdd-cam: 1800 mV ; Rail OFF
[    1.128919] vdd-sys-boost: 5000 mV ; Rail ON
[    1.131654] vdd-hdmi: 5000 mV ; Rail OFF
[    1.135127] vdd-hdmi: supplied by vdd-3v3
[    1.139241] aux-3v3: 3300 mV ; Rail ON
[    1.142946] snsr_pm: 3300 mV ; Rail ON
[    1.147164] vdd-disp-3v0: 3000 mV ; Rail ON
[    1.151137] vdd-fan: 5000 mV ; Rail OFF
[    1.154669] usb-vbus1: 5000 mV ; Rail OFF
[    1.158529] usb-vbus1: supplied by vdd-3v3
[    1.162764] usb-vbus3: 5000 mV ; Rail OFF
[    1.166585] usb-vbus3: supplied by vdd-3v3
[    1.171082] en-vdd-ts-1v8: 1800 mV ; Rail OFF
[    1.175385] en-vdd-ts-hv-3v3: 3300 mV ; Rail OFF
[    1.180108] en-vdd-disp-3v3: 3300 mV ; Rail ON
[    1.184407] en-mdm-pwr-3v7: ; Rail OFF
[    1.188246] en-vdd-disp-1v8: 1800 mV ; Rail ON
[    1.192223] reg-fixed-sync-voltage ce.regulator: Consumer c0 does not have device name
[    1.200353] en-vdd-cam-hv-2v8: ; Rail OFF
[    1.204167] rtl-5v0: ; Rail OFF
[    1.207268] en-usb-vbus2: ; Rail OFF
[    1.211106] en-vdd-cam-1v2: ; Rail OFF
[    1.214430] en-vdd-cam-1v2: supplied by vdd-3v3
[    1.219062] en-vdd-vcm-2v8: ; Rail ON
[    1.222588] en-vdd-vcm-2v8: supplied by vdd-3v3
[    1.227485] en-vdd-cam-1v2-alt: ; Rail OFF
[    1.231637] regulator-pwm 0.pwm-regulator: PWM request deferred
[    1.237025] platform 0.pwm-regulator: Driver regulator-pwm requests probe deferral
[    1.244942] vdd_gpu: applied init 1000000uV constraint
[    1.249671] vdd_gpu: 710 <--> 1320 mV at 1000 mV ; Rail OFF
[    1.255661] vdd_cpu: applied init 1000000uV constraint
[    1.260343] vdd_cpu: 708 <--> 1322 mV at 1000 mV normal ; Rail ON
[    1.266955] gpio wake34 for gpio=200
[    1.271150] extcon-gpio-states 1.extcon: Cable state 2
[    1.276383] Switching to clocksource arch_sys_counter
[    1.294397] nvmap_heap_init: nvmap_heap_init: created heap block cache
[    1.299104] tegra-carveouts tegra-carveouts.23: iram :dma coherent mem declare 0x0000000040001000,258048
[    1.308414] tegra-carveouts tegra-carveouts.23: assigned reserved memory node iram-carveout
[    1.316710] nvmap_page_pool_init: Total RAM pages: 1020846
[    1.322165] nvmap_page_pool_init: nvmap page pool size: 127605 pages (498 MB)
[    1.329361] nvmap_background_zero_thread: PP zeroing thread starting.
[    1.336251] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
[    1.343112] nvmap:inner cache maint threshold=2097152
[    1.354513] Wake39 for irq=52
[    1.355675] Could not add tegra-otg to power domain using device tree
[    1.362135] tegra-otg tegra-otg: otg transceiver registered
[    1.367913] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
[    1.376735] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
[    1.384579] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
[    1.392872] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
[    1.401264] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
[    1.410274] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra
[    1.418270] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type Tboard_tegra
[    1.427424] tegra21_plle_clk_enable: pll_e is already enabled
[    1.432562] t210_sata_uphy_pll_init: init sata uphy pll
[    1.437738] t210_sata_uphy_pll_init SATA uses SATA Lane
[    1.443253] tegra_xusb_padctl_phy_enable: init pex uphy pll
[    1.449716] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sys is having fixed voltage 1800000
[    1.457396] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-uart is having fixed voltage 1800000
[    1.466313] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-audio is having fixed voltage 1800000
[    1.475332] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-cam is having fixed voltage 1800000
[    1.484173] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-pex-ctrl is having fixed voltage 1800000
[    1.493443] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc1 is having voltages: 1800000:3300000
[    1.502896] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc3 is having fixed voltage 1800000
[    1.511990] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc4 is having fixed voltage 1800000
[    1.521091] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-audio-hv is having fixed voltage 1800000
[    1.530363] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-debug is having fixed voltage 1800000
[    1.539366] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-dmic is having fixed voltage 1800000
[    1.548307] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-gpio is having fixed voltage 1800000
[    1.557230] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-spi is having fixed voltage 1800000
[    1.566071] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-spi-hv is having fixed voltage 1800000
[    1.575171] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc2 is having fixed voltage 1800000
[    1.584270] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-dp is having fixed voltage 1800000
[    1.592973] tegra210-pmc-iopower pmc-iopower.29: NO_IO_POWER setting 0x0
[    1.599825] NET: Registered protocol family 2
[    1.604575] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    1.611344] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.617927] TCP: Hash tables configured (established 32768 bind 32768)
[    1.624315] TCP: reno registered
[    1.627449] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.633466] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.640099] NET: Registered protocol family 1
[    1.644457] RPC: Registered named UNIX socket transport module.
[    1.650067] RPC: Registered udp transport module.
[    1.654758] RPC: Registered tcp transport module.
[    1.659423] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.665850] PCI: CLS 0 bytes, default 64
[    1.666159] tegra-fuse tegra-fuse: Fuse driver initialized succesfully
[    1.672697] Trying to unpack rootfs image as initramfs...
[    1.910500] Freeing initrd memory: 6740K (ffffffc003100000 - ffffffc003795000)
[    1.919411] host1x host1x: initialized
[    1.924952] NTFS driver 2.1.30 [Flags: R/O].
[    1.927398] fuse init (API version 7.22)
[    1.931286] msgmni has been set to 7988
[    1.936011] io scheduler noop registered (default)
[    1.939841] Tegra cpuquiet initialized: disabled
[    1.945911] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails
[    1.951918] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes and lane map as 0x14
[    1.961959] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes and lane map as 0x14
[    1.992081] tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
[    1.996527] tegra-pcie 1003000.pcie-controller: link 1 down, ignoring
[    2.002966] tegra-pcie 1003000.pcie-controller: PCIE: no ports detected
[    2.009721] tegra-pcie 1003000.pcie-controller: PCIE: Disable power rails
[    2.018106] tsec tsec: initialized
[    2.020755] tsec tsecb: initialized
[    2.024909] nvdec nvdec: initialized
[    2.029416] falcon vic03: initialized
[    2.032467] falcon msenc: initialized
[    2.035856] falcon nvjpg: initialized
[    2.039216] tegradc tegradc.1: Display dc.54240000 registered with id=0
[    2.044991] of_dc_parse_platform_data: DC OR node is connected to /host1x/sor1
[    2.052315] display board info: id 0x0, fab 0x0
[    2.057334] display board info: id 0x0, fab 0x0
[    2.061560] invalid panel compatible
[    2.064714] parse_tmds_config: No tmds-config node
[    2.069575] of_dc_parse_platform_data: could not find vrr-settings node
[    2.076082] of_dc_parse_platform_data: nvidia,hdmi-vrr-caps not present
[    2.082746] of_dc_parse_platform_data: could not find SD settings node
[    2.089151] of_dc_parse_platform_data: could not find cmu node
[    2.094970] of_dc_parse_platform_data: could not find cmu node for adobeRGB
[    2.101924] tegradc tegradc.1: DT parsed successfully
[    2.107926] display board info: id 0x0, fab 0x0
[    2.112038] gpio wake53 for gpio=225
[    2.151175] tegradc tegradc.1: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000
[    2.510243] tegradc tegradc.1: probed
[    2.607929] Console: switching to colour frame buffer device 240x67
[    2.612926] tegradc tegradc.1: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000
[    2.642859] tegradc tegradc.1: fb registered
[    2.647670] tegra_camera_platform tegra-camera-platform.45: tegra_camera_probe:camera_platform_driver probe
[    2.656964] misc tegra_camera_ctrl: tegra_camera_isomgr_register camera's max_iso_bw 3600000
[    2.667520] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels
[    2.674422] tegra-adma tegra210-adma: Tegra210 ADMA driver register 10 channels
[    2.680754] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.687774] of_serial 70006000.serial: RX periodic polling enabled
[    2.693123] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
[    2.699885] console [ttyS0] enabled, bootconsole disabled
[    2.710758] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA
[    2.720560] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA
[    2.728559] serial-tegra 70006300.serial: RX in PIO mode
[    2.733964] 70006300.serial: ttyTHS3 at MMIO 0x70006300 (irq = 122) is a SERIAL_TEGRA
[    2.744142]  (null): coherent DMA mask is unset
[    2.748755] gk20a gpu.0: failed to allocate secure buffer -12
[    2.758590] tegradc tegradc.1: vrr_setup failed
[    2.771362] brd: module loaded
[    2.773736] loop: module loaded
[    2.774058] zram: Created 1 device(s) ...
[    2.774115] nct1008_nct72 0-004c: find device tree node, parsing dt
[    2.774119] nct1008_nct72 0-004c: starting parse dt
[    2.774200] nct1008_nct72 0-004c: success parsing dt
[    2.774317] nct1008_nct72 0-004c: success in enabling rail vdd_nct72
[    2.784457] tegradc tegradc.1: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000
[    2.816924] tegradc tegradc.1: blank - normal
[    2.826775] tegradc tegradc.1: unblank
[    2.841582] NCT72: Enabled overheat logging at 104.00C
[    2.841681] gpio wake33 for gpio=188
[    2.841742] nct1008_nct72 0-004c: nct1008_probe: initialized
[    2.850296] THERMAL EST start of therm_fan_est_probe.
[    2.850358] THERMAL EST: found 2 subdevs
[    2.850360] THERMAL EST name: thermal-fan-est.
[    2.850363] THERMAL EST num_resources: 0
[    2.850366] [THERMAL EST subdev 0]
[    2.850368] THERMAL EST subdev name: CPU-therm
[    2.850371] THERMAL EST index 0 coeffs 50
[    2.850373] THERMAL EST index 1 coeffs 0
[    2.850375] THERMAL EST index 2 coeffs 0
[    2.850376] THERMAL EST index 3 coeffs 0
[    2.850377] THERMAL EST index 4 coeffs 0
[    2.850379] THERMAL EST index 5 coeffs 0
[    2.850380] THERMAL EST index 6 coeffs 0
[    2.850382] THERMAL EST index 7 coeffs 0
[    2.850383] THERMAL EST index 8 coeffs 0
[    2.850385] THERMAL EST index 9 coeffs 0
[    2.850386] [THERMAL EST subdev 1]
[    2.850389] THERMAL EST subdev name: GPU-therm
[    2.850392] THERMAL EST index 0 coeffs 50
[    2.850393] THERMAL EST index 1 coeffs 0
[    2.850395] THERMAL EST index 2 coeffs 0
[    2.850396] THERMAL EST index 3 coeffs 0
[    2.850398] THERMAL EST index 4 coeffs 0
[    2.850399] THERMAL EST index 5 coeffs 0
[    2.850401] THERMAL EST index 6 coeffs 0
[    2.850402] THERMAL EST index 7 coeffs 0
[    2.850404] THERMAL EST index 8 coeffs 0
[    2.850405] THERMAL EST index 9 coeffs 0
[    2.850410] THERMAL EST index 0: trip_temp 0, hyst 0
[    2.850413] THERMAL EST index 1: trip_temp 51000, hyst 15000
[    2.850415] THERMAL EST index 2: trip_temp 61000, hyst 9000
[    2.850418] THERMAL EST index 3: trip_temp 71000, hyst 9000
[    2.850420] THERMAL EST index 4: trip_temp 82000, hyst 10000
[    2.850422] THERMAL EST index 5: trip_temp 140000, hyst 0
[    2.850424] THERMAL EST index 6: trip_temp 150000, hyst 0
[    2.850426] THERMAL EST index 7: trip_temp 160000, hyst 0
[    2.850428] THERMAL EST index 8: trip_temp 170000, hyst 0
[    2.850430] THERMAL EST index 9: trip_temp 180000, hyst 0
[    2.850432] THERMAL EST index 0: trip_temps_hyst 0
[    2.850434] THERMAL EST index 1: trip_temps_hyst 36000
[    2.850436] THERMAL EST index 2: trip_temps_hyst 51000
[    2.850437] THERMAL EST index 3: trip_temps_hyst 52000
[    2.850439] THERMAL EST index 4: trip_temps_hyst 61000
[    2.850440] THERMAL EST index 5: trip_temps_hyst 62000
[    2.850442] THERMAL EST index 6: trip_temps_hyst 71000
[    2.850444] THERMAL EST index 7: trip_temps_hyst 72000
[    2.850445] THERMAL EST index 8: trip_temps_hyst 82000
[    2.850447] THERMAL EST index 9: trip_temps_hyst 140000
[    2.850449] THERMAL EST index 10: trip_temps_hyst 140000
[    2.850450] THERMAL EST index 11: trip_temps_hyst 150000
[    2.850452] THERMAL EST index 12: trip_temps_hyst 150000
[    2.850454] THERMAL EST index 13: trip_temps_hyst 160000
[    2.850455] THERMAL EST index 14: trip_temps_hyst 160000
[    2.850457] THERMAL EST index 15: trip_temps_hyst 170000
[    2.850458] THERMAL EST index 16: trip_temps_hyst 170000
[    2.850460] THERMAL EST index 17: trip_temps_hyst 180000
[    2.850462] THERMAL EST index 18: trip_temps_hyst 180000
[    2.850463] THERMAL EST index 19: trip_temps_hyst 0
[    2.850465] THERMAL EST index 20: trip_temps_hyst 0
[    2.850468] THERMAL EST init dev[0] temp hist to 25000
[    2.850470] THERMAL EST init dev[1] temp hist to 25000
[    2.850472] THERMAL EST cdev_type: pwm-fan.
[    2.850475] THERMAL EST governor name: pid_thermal_gov
[    2.850669] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est.46
[    2.850670] THERMAL EST: thz register success.
[    2.850768] THERMAL EST: end of probe, return err: 0
[    2.850830] tegra_profiler: Branch: Dev
[    2.850831] tegra_profiler: Version: 1.107
[    2.850833] tegra_profiler: Samples version: 36
[    2.850835] tegra_profiler: IO version: 20
[    2.850839] armv8_pmu: imp: 0x41, idcode: 0x1
[    2.850843] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[    2.850846] armv8_pmu: imp: 0x41, idcode: 0x1
[    2.850849] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[    2.850852] armv8_pmu: imp: 0x41, idcode: 0x1
[    2.850854] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[    2.850857] armv8_pmu: imp: 0x41, idcode: 0x1
[    2.850860] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[    2.850973] tegra_profiler: auth: init
[    2.851265] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0
[    2.853872] tegra-sata tegra-sata.0: version 1.0
[    2.854269] t210_sata_uphy_pll_init: sata uphy already enabled
[    2.854914] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode
[    2.854923] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pmp pio slum part sadm apst 
[    2.886994] Rounding down aligned max_sectors from 4294967295 to 4294967288
[    2.887238] spi-tegra114 7000d400.spi: /spi@7000d400/prod-settings has no reg property
[    2.887355] spi-tegra114 7000d400.spi: Static pin configuration used
[    2.887625] spi_master spi0: cannot find modalias for /spi@7000d400/prod-settings
[    2.887723] spi-tegra114 7000da00.spi: /spi@7000da00/prod-settings has no reg property
[    2.887803] spi-tegra114 7000da00.spi: Static pin configuration used
[    2.888026] spi_master spi3: cannot find modalias for /spi@7000da00/prod-settings
[    2.888592] tun: Universal TUN/TAP device driver, 1.6
[    2.888594] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.888777] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    2.888779] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    2.889205] PPP generic driver version 2.4.2
[    2.889299] PPP BSD Compression module registered
[    2.889301] PPP Deflate Compression module registered
[    2.889313] PPP MPPE Compression module registered
[    2.889316] NET: Registered protocol family 24
[    2.889368] usbcore: registered new interface driver r8152
[    2.889402] usbcore: registered new interface driver asix
[    2.889426] usbcore: registered new interface driver ax88179_178a
[    2.889448] usbcore: registered new interface driver cdc_ether
[    2.889478] usbcore: registered new interface driver smsc95xx
[    2.889510] usbcore: registered new interface driver net1080
[    2.889535] usbcore: registered new interface driver cdc_subset
[    2.889556] usbcore: registered new interface driver zaurus
[    2.889594] usbcore: registered new interface driver cdc_ncm
[    2.889613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.889879] ehci-pci: EHCI PCI platform driver
[    2.890062] tegra_xusb_read_usb_calib: usb_calib0 = 0x0a229414
[    2.891496] tegra-xhci tegra-xhci: XUSB device id = 0xfac (T210)
[    2.892099] tegra-xhci tegra-xhci: Firmware File: tegra21x_xusb_firmware (124416 Bytes)
[    2.892309] tegra-xhci tegra-xhci: Firmware DMA Memory: dma 0x0000000080040000 mapped 0xffffff8000339000 (124416 Bytes)
[    2.892314] tegra-xhci tegra-xhci: num_hsic_port 0
[    2.892806] usbcore: registered new interface driver cdc_acm
[    2.892808] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.892832] usbcore: registered new interface driver cdc_wdm
[    2.892865] usbcore: registered new interface driver usb-storage
[    2.892946] usbcore: registered new interface driver usbserial
[    2.892968] usbcore: registered new interface driver ftdi_sio
[    2.892990] usbserial: USB Serial support registered for FTDI USB Serial Device
[    2.893010] usbcore: registered new interface driver option
[    2.893026] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.893046] usbcore: registered new interface driver pl2303
[    2.893063] usbserial: USB Serial support registered for pl2303
[    2.893086] usbcore: registered new interface driver nvshieldled
[    2.893089] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012)
[    2.893347] tegra USB phy - inst[0] platform info:
[    2.893349] port_otg: yes
[    2.893350] has_hostpc: yes
[    2.893352] phy_interface: USB_PHY_INTF_UTMI
[    2.893353] op_mode: TEGRA_USB_OPMODE_DEVICE
[    2.893355] qc2_voltage: 0
[    2.893356] vbus_pmu_irq: 0
[    2.893358] charging: enabled
[    2.893360] remote_wakeup: disabled
[    2.894463] tegra-xhci tegra-xhci: Firmware timestamp: 2016-06-16 13:21:43 UTC, Version: 50.16 release, Falcon state 0x20
[    2.894511] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller
[    2.894531] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 1
[    2.895280] tegra-xhci tegra-xhci: irq 71, io mem 0x70090000
[    2.895363] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.895370] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.895374] usb usb1: Product: Nvidia xHCI Host Controller
[    2.895378] usb usb1: Manufacturer: Linux 3.10.96-tegra tegra-xhci
[    2.895382] usb usb1: SerialNumber: tegra-xhci
[    2.895637] xHCI xhci_add_endpoint called for root hub
[    2.895640] xHCI xhci_check_bandwidth called for root hub
[    2.895723] hub 1-0:1.0: USB hub found
[    2.895745] hub 1-0:1.0: 5 ports detected
[    2.898169] regulator_get() failed for (tegra-udc.0,usb_bat_chg), -19
[    2.898176] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
[    2.898559] usbcore: registered new interface driver xpad
[    2.898614] usbcore: registered new interface driver usb_acecad
[    2.898642] usbcore: registered new interface driver aiptek
[    2.898666] usbcore: registered new interface driver gtco
[    2.898688] usbcore: registered new interface driver hanwang
[    2.898713] usbcore: registered new interface driver kbtab
[    2.898738] usbcore: registered new interface driver wacom
[    2.950156] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller
[    2.950168] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 2
[    2.950254] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    2.950259] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.950263] usb usb2: Product: Nvidia xHCI Host Controller
[    2.950267] usb usb2: Manufacturer: Linux 3.10.96-tegra tegra-xhci
[    2.950270] usb usb2: SerialNumber: tegra-xhci
[    2.950491] xHCI xhci_add_endpoint called for root hub
[    2.950494] xHCI xhci_check_bandwidth called for root hub
[    2.950571] hub 2-0:1.0: USB hub found
[    2.950586] hub 2-0:1.0: 4 ports detected
[    2.960138] otg state changed: SUSPEND --> HOST
[    2.960169] tegra_start_host(): enable ehci node
[    2.960557] tegra USB phy - inst[0] platform info:
[    2.960559] port_otg: yes
[    2.960560] has_hostpc: yes
[    2.960562] phy_interface: USB_PHY_INTF_UTMI
[    2.960563] op_mode: TEGRA_USB_OPMODE_HOST
[    2.960565] qc2_voltage: 0
[    2.960567] hot_plug: disabled
[    2.960568] remote_wakeup: enabled
[    2.960862] regulator_get() failed for (tegra-ehci.0,usb_vbus), -19
[    2.960865] usb_phy: failed regulator_get vdd_vbus_usb:-19, inst:0
[    3.000188] Wake44 for irq=81
[    3.000205] Wake40 for irq=53
[    3.000207] Wake41 for irq=53
[    3.000209] Wake42 for irq=53
[    3.000211] Wake43 for irq=53
[    3.051166] max77620-rtc max77620-rtc.1: rtc core: registered max77620-rtc as rtc1
[    3.134025] Wake51 for irq=118
[    3.134028] Enabling wake51
[    3.134350] Wake16 for irq=34
[    3.134352] Enabling wake16
[    3.135042] tegra-rtc 7000e000.rtc: rtc core: registered tegra-rtc as rtc0
[    3.135280] i2c /dev entries driver
[    3.136885] [OV5693]: probing v4l2 sensor.
[    3.137154] ov5693 6-0036: Failed to allocate eeprom reg map: -22
[    3.286711] usb 2-1: new SuperSpeed USB device number 2 using tegra-xhci
[    3.382607] usb 2-1: New USB device found, idVendor=0955, idProduct=09ff
[    3.382613] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    3.382617] usb 2-1: Product: USB 10/100/1000 LAN
[    3.382621] usb 2-1: Manufacturer: Nvidia
[    3.382624] usb 2-1: SerialNumber: 000001000000
[    3.556595] usb 2-1: reset SuperSpeed USB device number 2 using tegra-xhci
[    3.973343] tegra-ehci tegra-ehci.0: Tegra EHCI Host Controller
[    3.973360] tegra-ehci tegra-ehci.0: new USB bus registered, assigned bus number 3
[    3.973447] tegra-ehci tegra-ehci.0: irq 52, io mem 0x7d000000
[    4.000138] tegra-ehci tegra-ehci.0: USB 2.0 started, EHCI 1.10
[    4.000193] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    4.000199] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.000203] usb usb3: Product: Tegra EHCI Host Controller
[    4.000207] usb usb3: Manufacturer: Linux 3.10.96-tegra ehci_hcd
[    4.000211] usb usb3: SerialNumber: tegra-ehci.0
[    4.000524] hub 3-0:1.0: USB hub found
[    4.000537] hub 3-0:1.0: 1 port detected
[    4.000677] Could not add tegra-ehci.0 to power domain using device tree
[    4.315548] r8152 2-1:1.0 eth0: v2.03.3 (2015/01/29)
[    4.315555] r8152 2-1:1.0 eth0: This product is covered by one or more of the following patents:
               		US6,570,884, US6,115,776, and US6,327,625.
               
[    4.330143] usb 3-1: new full-speed USB device number 2 using tegra-ehci
[    4.429703] usb 3-1: New USB device found, idVendor=413c, idProduct=1005
[    4.429709] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.429713] usb 3-1: Product: Dell Multimedia Pro Keyboard Hub
[    4.429717] usb 3-1: Manufacturer: Dell
[    4.451950] hub 3-1:1.0: USB hub found
[    4.461838] hub 3-1:1.0: 3 ports detected
[    4.660036] tegradc tegradc.1: hdmi: plugged
[    4.667613] extcon-gpio-states 1.extcon: Cable state 2
[    4.821467] usb 3-1.1: new low-speed USB device number 3 using tegra-ehci
[    4.831941] virtual_init
[    4.838178] [IMX135] sensor driver loading
[    4.845502] [imx132] sensor driver loading
[    4.852746] [ar0261] sensor driver loading
[    4.859956] ov7695 sensor driver loading
[    4.866992] mt9m114 sensor driver loading
[    4.874130] [ov10823] sensor driver loading
[    4.881589] usbcore: registered new interface driver uvcvideo
[    4.890495] USB Video Class driver (1.1.1)
[    4.899327] max77620-power-off max77620-power-off.4: Event recorder REG_NVERC : 0x0
[    4.910692] FAN dev name: pwm-fan
[    4.917216] usb 3-1.1: New USB device found, idVendor=413c, idProduct=2011
[    4.917223] FAN:gpio request success.
[    4.917260] pwm_fan_driver pwm-fan.43: cap state:7, cap pwm:255
[    4.917388] pwm_fan_driver pwm-fan.43: got pwm for fan
[    4.917468] pwm_fan_driver pwm-fan.43: fan tach request irq: 360. success
[    4.917475] pwm_fan_driver pwm-fan.43: tach period: 1000
[    4.917556] pwm_fan_driver pwm-fan.43: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
[    4.917562] pwm_fan_driver pwm-fan.43: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
[    4.917566] pwm_fan_driver pwm-fan.43: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
[    4.917571] pwm_fan_driver pwm-fan.43: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
[    4.917576] pwm_fan_driver pwm-fan.43: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
[    4.917580] pwm_fan_driver pwm-fan.43: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
[    4.917584] pwm_fan_driver pwm-fan.43: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
[    4.917588] pwm_fan_driver pwm-fan.43: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
[    4.917592] pwm_fan_driver pwm-fan.43: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
[    4.917597] pwm_fan_driver pwm-fan.43: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
[    4.918957] tegra_aotag tegra-aotag.30: AOTAG probe started
[    4.919015] tegra_aotag tegra-aotag.30: nominal ft -- 105
[    4.919019] tegra_aotag tegra-aotag.30: tall -- 76
[    4.919022] tegra_aotag tegra-aotag.30: tiddq -- 1
[    4.919026] tegra_aotag tegra-aotag.30: ten-count -- 16
[    4.919029] tegra_aotag tegra-aotag.30: tsample -- 9
[    4.919032] tegra_aotag tegra-aotag.30: pdiv -- 8
[    4.919036] tegra_aotag tegra-aotag.30: nominal cp -- 25
[    4.919039] tegra_aotag tegra-aotag.30: pdiv-ate -- 8
[    4.919042] tegra_aotag tegra-aotag.30: tsamp-ate -- 39
[    4.919046] tegra_aotag tegra-aotag.30: compensation A,B -- 10632,-67490
[    4.919050] tegra_aotag tegra-aotag.30: sensor found :ID 0, Name: aotag0
[    4.919054] tegra_aotag tegra-aotag.30: reading fuse value for sensor 0
[    4.919059] tegra_aotag tegra-aotag.30: base-cp:217 shifted-cp:3
[    4.919062] tegra_aotag tegra-aotag.30: base-ft:48c shifted-ft:fffffffd
[    4.919066] tegra_aotag tegra-aotag.30: actual_aotag_cp 265, ft 1035
[    4.919071] tegra_aotag tegra-aotag.30: - Tsens calib value - 0x379db50
[    4.919075] tegra_aotag tegra-aotag.30: CPmask 1fff FTmask 3ffe000
[    4.919079] tegra_aotag tegra-aotag.30: Tsense calib CP - 0x1b50
[    4.919082] tegra_aotag tegra-aotag.30: Tsense Actual CP d.33040
[    4.919086] tegra_aotag tegra-aotag.30: Tsense calib FT - 0x1bce
[    4.919089] tegra_aotag tegra-aotag.30: Tsense Actual FT d.36174
[    4.919093] tegra_aotag tegra-aotag.30: delta ts 3134, temp 770
[    4.919097] tegra_aotag tegra-aotag.30: thermA-927, thermB--841
[    4.919100] tegra_aotag tegra-aotag.30: Registering sensor 0
[    4.919132] tegra_aotag tegra-aotag.30: Bound to TZ : ID 0
[    4.919138] tegra_aotag tegra-aotag.30: shutdown temperature - 110
[    4.919142] tegra_aotag tegra-aotag.30: AOTAG EN 60
[    4.919146] tegra_aotag tegra-aotag.30: Probe done [SUCCESS]:0
[    4.919401] md: raid0 personality registered for level 0
[    5.339608] device-mapper: uevent: version 1.0.3
[    5.339617] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.339622] usb 3-1.1: Product: Dell Multimedia Pro Keyboard
[    5.339626] usb 3-1.1: Manufacturer: Dell
[    5.371563] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    5.382964] Tegra210 cpuidle driver
[    5.389845] sdhci: Secure Digital Host Controller Interface driver
[    5.398723] sdhci: Copyright(c) Pierre Ossman
[    5.405759] sdhci-pltfm: SDHCI platform and OF driver helper
[    5.414381] mmc0: sdhci_tegra_probe line=5737 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0
[    5.427694] sdhci-tegra sdhci-tegra.3: Parent select= pll_p rate=408000000
[    5.437410] sdhci-tegra sdhci-tegra.3: Parent select= pll_c4_out2 rate=199680000
[    5.447597] Could not add sdhci-tegra.3 to power domain using device tree
[    5.457939] sdhci-tegra sdhci-tegra.3: Speedo value 1917
[    5.466137] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1125, boot_mv 1125, min_or_mv 0
[    5.477997] regulator_get() failed for (sdhci-tegra.3,vqmmc), -19
[    5.487047] mmc0: no vqmmc regulator found
[    5.494068] usb 3-1.3: new low-speed USB device number 4 using tegra-ehci
[    5.494089] regulator_get() failed for (sdhci-tegra.3,vmmc), -19
[    5.494091] mmc0: no vmmc regulator found
[    5.530151] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
[    5.540569] mmc1: sdhci_tegra_probe line=5737 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0
[    5.554162] sdhci-tegra sdhci-tegra.1: Parent select= pll_p rate=408000000
[    5.564093] Could not add sdhci-tegra.1 to power domain using device tree
[    5.574624] sdhci-tegra sdhci-tegra.1: Speedo value 1917
[    5.583076] sdhci-tegra sdhci-tegra.1: Tuning constraints: nom_mv 1125, boot_mv 1125, min_or_mv 0
[    5.596764] regulator_get() failed for (sdhci-tegra.1,vqmmc), -19
[    5.606089] mmc1: no vqmmc regulator found
[    5.613384] usb 3-1.3: New USB device found, idVendor=17ef, idProduct=6019
[    5.623489] regulator_get() failed for (sdhci-tegra.1,vmmc), -19
[    5.632762] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.632768] usb 3-1.3: Product: Lenovo USB Optical Mouse
[    5.632772] usb 3-1.3: Manufacturer: PixArt
[    5.643702] mmc1: no vmmc regulator found
[    5.690147] mmc1: SDHCI controller on sdhci-tegra.1 [sdhci-tegra.1] using ADMA
[    5.701595] mmc2: sdhci_tegra_probe line=5737 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0
[    5.715738] sdhci-tegra sdhci-tegra.0: Parent select= pll_p rate=408000000
[    5.723933] mmc0: BKOPS_EN bit is not set
[    5.733809] Could not add sdhci-tegra.0 to power domain using device tree
[    5.744800] sdhci-tegra sdhci-tegra.0: Speedo value 1917
[    5.753836] sdhci-tegra sdhci-tegra.0: Tuning constraints: nom_mv 1125, boot_mv 1125, min_or_mv 0
[    5.766575] regulator_get() failed for (sdhci-tegra.0,vqmmc), -19
[    5.776496] mmc2: no vqmmc regulator found
[    5.784445] regulator_get() failed for (sdhci-tegra.0,vmmc), -19
[    5.794354] mmc2: no vmmc regulator found
[    5.840139] mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
[    5.851497] gpio wake35 for gpio=201
[    5.861409] mmc0: tap value and tuning window after hw tuning completion ...
[    5.861569] tegra-se tegra21-se: tegra_se_probe: complete
[    5.862152] hidraw: raw HID events driver (C) Jiri Kosina
[    5.891602] mmc0: tuning_window[0]: 0x3fffffff
[    5.900225] mmc0: tuning_window[1]: 0xfffffffe
[    5.900825] input: Dell Dell Multimedia Pro Keyboard as /devices/tegra-ehci.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input0
[    5.901100] hid-generic 0003:413C:2011.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell Multimedia Pro Keyboard] on usb-tegra-ehci.0-1.1/input0
[    5.941263] mmc0: tuning_window[2]: 0xfffffff3
[    5.950144] mmc0: tuning_window[3]: 0x7fffff1f
[    5.959012] mmc0: tuning_window[4]: 0x0
[    5.967275] mmc0: tuning_window[5]: 0x0
[    5.975510] mmc0: tuning_window[6]: 0x0
[    5.975622] input: Dell Dell Multimedia Pro Keyboard as /devices/tegra-ehci.0/usb3/3-1/3-1.1/3-1.1:1.1/input/input1
[    5.975822] hid-generic 0003:413C:2011.0002: input,hidraw1: USB HID v1.10 Device [Dell Dell Multimedia Pro Keyboard] on usb-tegra-ehci.0-1.1/input1
[    6.016468] mmc0: tuning_window[7]: 0x0
[    6.024991] sdhci: Tap value: 49 | Trim value: 8
[    6.025382] input: PixArt Lenovo USB Optical Mouse as /devices/tegra-ehci.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input2
[    6.025552] hid-generic 0003:17EF:6019.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt Lenovo USB Optical Mouse] on usb-tegra-ehci.0-1.3/input0
[    6.025598] usbcore: registered new interface driver usbhid
[    6.025600] usbhid: USB HID core driver
[    6.025610] tegra_bootloader_debug: Created tegra_bootloader directory
[    6.025617] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_verify_regs in tegra_bootloader directory
[    6.025623] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_prof in tegra_bootloader directory
[    6.025957] nvadsp 702ef000.adsp: in probe()...
[    6.026688] nvadsp 702ef000.adsp: AMC/ARAM initialized.
[    6.026797] nvadsp 702ef000.adsp: nvadsp_app_module_probe
[    6.028821] tegra_throttle : init passed
[    6.029807] cpu-tegra: init EDP limit: 1122 MHz
[    6.030333] pll_x: not ready for dynamic ramp to 921600000
[    6.030368] pll_x: not ready for dynamic ramp to 921600000
[    6.031635] soctherm: prog thresholds
[    6.031639] soctherm: prog thresholds
[    6.031641] soctherm: tz:2 not found, skip thresh prog
[    6.031643] soctherm: prog thresholds
[    6.031654] soctherm: skipping sensor 4 programming
[    6.031656] soctherm: skipping sensor 5 programming
[    6.031662] soctherm: trip_point temp 127500 forced to 127000
[    6.271765] sdhci: SDMMC Interrupt status: 0x00040000
[    6.282855] mmc0: switch to HS400 mode is successful
[    6.294058] usbcore: registered new interface driver snd-usb-audio
[    6.297314] mmc0: new HS400 MMC card at address 0001
[    6.297785] mmcblk0: mmc0:0001 016G32 14.6 GiB 
[    6.298006] mmcblk0rpmb: mmc0:0001 016G32 partition 3 4.00 MiB
[    6.299021]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18
[    6.326598] mmc1: queuing unknown CIS tuple 0x80 (5 bytes)
[    6.520168] mmc1: tap value and tuning window after hw tuning completion ...
[    6.532027] mmc1: tuning_window[0]: 0xe7ffffff
[    6.541216] mmc1: tuning_window[1]: 0x7fffffff
[    6.550335] mmc1: tuning_window[2]: 0xfffffffc
[    6.559373] mmc1: tuning_window[3]: 0x7fffff9f
[    6.568355] mmc1: tuning_window[4]: 0x0
[    6.576693] mmc1: tuning_window[5]: 0x0
[    6.584984] mmc1: tuning_window[6]: 0x0
[    6.593244] mmc1: tuning_window[7]: 0x0
[    6.601438] sdhci: Tap value: 83 | Trim value: 8
[    6.610357] sdhci: SDMMC Interrupt status: 0x00040000
[    6.623201] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[    6.712077] tegra-i2c 7000c000.i2c: no acknowledge from address 0x1b
[    6.722769] rt5659 0-001b: Device with ID register fdc83400 is not rt5659
[    6.742828] tegra210-i2s tegra210-i2s.0: Missing prop fsync-width for I2S0
[    6.754816] tegra210-i2s tegra210-i2s.2: Missing prop fsync-width for I2S2
[    6.766088] tegra210-i2s tegra210-i2s.3: Missing prop fsync-width for I2S3
[    6.777385] tegra210-i2s tegra210-i2s.4: Missing prop fsync-width for I2S4
[    6.792941] OPE platform probe
[    6.800258] OPE platform probe successful
[    6.808290] OPE platform probe
[    6.815462] OPE platform probe successful
[    6.823528] tegra210_adsp_audio_platform_probe: platform probe started
[    6.835276] tegra210-adsp adsp_audio.3: Default param-type to BYTE for mp3-dec1
[    6.846800] tegra210-adsp adsp_audio.3: Default param-type to BYTE for spkprot
[    6.858279] tegra210-adsp adsp_audio.3: Default param-type to BYTE for src
[    6.869324] tegra210-adsp adsp_audio.3: Default param-type to BYTE for aac-dec1
[    6.880803] tegra210-adsp adsp_audio.3: Default param-type to BYTE for aec
[    6.891394] tegra210_adsp_audio_platform_probe probe successfull.
[    6.898705] tegra-snd-t210ref-mobile-rt565x sound.27: Failed to get HP Det GPIO,should be handled by codec
[    6.977016] tegra210-ape-admaif tegra210-admaif: ASoC: Failed to create codec debugfs directory
[    6.991053] tegra210-adsp adsp_audio.3: ASoC: Failed to create platform debugfs directory
[    7.034921] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF1 <-> ADMAIF1 mapping ok
[    7.048020] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF2 <-> ADMAIF2 mapping ok
[    7.060829] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF3 <-> ADMAIF3 mapping ok
[    7.073446] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF4 <-> ADMAIF4 mapping ok
[    7.085909] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF5 <-> ADMAIF5 mapping ok
[    7.098339] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF6 <-> ADMAIF6 mapping ok
[    7.110407] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF7 <-> ADMAIF7 mapping ok
[    7.122161] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF8 <-> ADMAIF8 mapping ok
[    7.133639] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF9 <-> ADMAIF9 mapping ok
[    7.145107] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF10 <-> ADMAIF10 mapping ok
[    7.222313] tegra-snd-t210ref-mobile-rt565x sound.27:  ADSP-FE1 <-> ADSP PCM1 mapping ok
[    7.234566] tegra-snd-t210ref-mobile-rt565x sound.27:  ADSP-FE2 <-> ADSP PCM2 mapping ok
[    7.246647] compress asoc: ADSP-FE3 <-> ADSP COMPR1 mapping ok
[    7.256389] compress asoc: ADSP-FE4 <-> ADSP COMPR2 mapping ok
[    7.282330] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no source widget found for x HPO L Playback
[    7.294731] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x HPO L Playback -> direct -> x Headphone Jack
[    7.309175] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no source widget found for x HPO R Playback
[    7.321610] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x HPO R Playback -> direct -> x Headphone Jack
[    7.336103] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x MICBIAS1
[    7.347923] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Mic Jack -> direct -> x MICBIAS1
[    7.361443] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x IN1P
[    7.372987] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Mic Jack -> direct -> x IN1P
[    7.386242] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x Mic Det Power
[    7.398619] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Mic Jack -> direct -> x Mic Det Power
[    7.412721] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no source widget found for x SPO Playback
[    7.425288] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x SPO Playback -> direct -> x Int Spk
[    7.439305] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC L1
[    7.451289] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC L1
[    7.464890] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC L2
[    7.476884] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC L2
[    7.490480] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC R1
[    7.502490] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC R1
[    7.516110] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC R2
[    7.528109] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC R2
[    7.549195] input: tegra-snd-t210ref-mobile-rt565x Headphone Jack as /devices/platform/sound.27/sound/card1/input3
[    7.566727] tegra-snd-t210ref-mobile-rt565x sound.27: codec-dai "dit-hifi" registered
[    7.578067] tegra-snd-t210ref-mobile-rt565x sound.27: This is a dummy codec
[    7.589428] GACT probability NOT on
[    7.596471] Mirror/redirect action on
[    7.603681] u32 classifier
[    7.609925]     Actions configured
[    7.616909] Netfilter messages via NETLINK v0.30.
[    7.625303] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    7.635344] ctnetlink v0.93: registering with nfnetlink.
[    7.644467] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    7.655284] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    7.665242] xt_time: kernel timezone is -0000
[    7.673528] ipip: IPv4 over IPv4 tunneling driver
[    7.682430] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.691702] arp_tables: (C) 2002 David S. Miller
[    7.700058] TCP: cubic registered
[    7.707127] Initializing XFRM netlink socket
[    7.715286] NET: Registered protocol family 10
[    7.724260] mip6: Mobile IPv6
[    7.731031] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.740387] sit: IPv6 over IPv4 tunneling driver
[    7.749465] NET: Registered protocol family 17
[    7.757765] NET: Registered protocol family 15
[    7.766022] Bridge firewalling registered
[    7.773834] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    7.783600] Bluetooth: HIDP socket layer initialized
[    7.792454] NET: Registered protocol family 35
[    7.800856] Key type dns_resolver registered
[    7.809006] NET: Registered protocol family 41
[    7.819064] Registering SWP/SWPB emulation handler
[    7.851591] isp isp.0: initialized
[    7.860234] isp isp.1: initialized
[    7.867676] vdd_gpu: disabling
[    7.874499] en-vdd-cam-1v2-alt: disabling
[    7.882306] en-vdd-vcm-2v8: disabling
[    7.889766] en-vdd-cam-1v2: disabling
[    7.897142] en-vdd-cam-hv-2v8: disabling
[    7.904896] en-vdd-disp-1v8: disabling
[    7.912550] en-mdm-pwr-3v7: disabling
[    7.919980] en-vdd-disp-3v3: disabling
[    7.927653] en-vdd-ts-hv-3v3: disabling
[    7.935281] en-vdd-ts-1v8: disabling
[    7.942616] usb-vbus3: disabling
[    7.949610] vdd-fan: disabling
[    7.962595] vdd-disp-3v0: disabling
[    7.969812] snsr_pm: disabling
[    7.976544] aux-3v3: disabling
[    7.983203] en-vdd-cam: disabling
[    7.990059] en-vdd-sd: disabling
[    8.001680] lcd-bl-en: disabling
[    8.008340] max77620-gpio7: disabling
[    8.027010] vdd-cpu-fixed: disabling
[    8.033996] regulator-dummy: disabling
[    8.042002] gpio wake24 for gpio=189
[    8.048995] gpio wake27 for gpio=192
[    8.055938] gpio wake25 for gpio=190
[    8.062888] input: gpio-keys as /devices/platform/gpio-keys.47/input/input4
[    8.090429] tegra-rtc 7000e000.rtc: setting system clock to 2017-01-06 13:58:45 UTC (1483711125)
[    8.102698] vi vi: vi_probe: ++
[    8.111271] vi vi: initialized
[    8.117970] vi vi: parsing node /host1x/vi
[    8.125314] vi vi: handling endpoint /host1x/vi/ports/port@0/endpoint
[    8.135070] vi vi: handling endpoint /host1x/vi/ports/port@1/endpoint
[    8.144744] vi vi: handling endpoint /host1x/vi/ports/port@2/endpoint
[    8.154372] vi vi: handling endpoint /host1x/vi/ports/port@3/endpoint
[    8.163933] vi vi: handling endpoint /host1x/vi/ports/port@4/endpoint
[    8.173401] vi vi: handling endpoint /host1x/vi/ports/port@5/endpoint
[    8.182765] vi vi: parsing node /host1x/i2c@546c0000/ov5693_c@36
[    8.191687] vi vi: handling endpoint /host1x/i2c@546c0000/ov5693_c@36/ports/port@0/endpoint
[    8.202989] vi vi: subdev ov5693 6-0036 bound
[    8.210310] vi vi: notify complete, all subdevs registered
[    8.218744] vi vi: creating links for entity ov5693 6-0036
[    8.227217] vi vi: processing endpoint /host1x/i2c@546c0000/ov5693_c@36/ports/port@0/endpoint
[    8.238844] vi vi: skipping channel port /host1x/i2c@546c0000/ov5693_c@36:0
[    8.248869] vi vi: creating links for channels
[    8.256361] vi vi: processing endpoint /host1x/vi/ports/port@0/endpoint
[    8.266043] vi vi: creating link for channel vi-output-2
[    8.274400] vi vi: creating ov5693 6-0036:0 -> vi-output-2:0 link
[    8.284271] [dram-timers] DRAM derating cdev registered.
[    8.292669] Disable partitions left on by BL
[    8.299956]     sata
[    8.305265]     disb
[    8.310453] Disabling clocks left on by bootloader:
[    8.318312]    audio2_dmic
[    8.323991]    audio1_dmic
[    8.329629]    audio0_dmic
[    8.335239]    audio_2x
[    8.340531]    audio
[    8.345507]    audio4
[    8.350598]    audio3
[    8.355628]    audio2
[    8.360619]    audio1
[    8.365556]    audio0
[    8.370534]    entropy
[    8.375496]    dsi2-fixed
[    8.380697]    dsi1-fixed
[    8.385864]    sdmmc4_ddr
[    8.391014]    sdmmc1_ddr
[    8.396160]    cclk_lp
[    8.401661] tegra_cl_dvfs 70110000.dfll-ovr: DT data retrieved successfully
[    8.411387] tune_cpu_trimmers: init soctherm cpu zone LOW
[    8.419471] tegra_cl_dvfs_init_cdev: cpu_cold cooling device registered
[    8.429050] Tegra CPU DFLL is initialized with use_dfll = 1
[    8.437487] tegra_dvfs: 0.vdd-cpu-rail-ovr connected to regulator 
[    8.446508] tegra_cl_dvfs_init_cdev: cpu_hot cooling device registered
[    8.455875] tegra_dvfs: 4.vdd-core-rail-max77620 connected to regulator 
[    8.465602] tegra_dvfs: 1.vdd-gpu-rail-ovr connected to regulator 
[    8.475051] CPU rate: 921 MHz
[    8.480316] last reset is due to software reset

[    8.490275] KERNEL: PMC reset status reg: 0x3
[    8.497273] tegra_actmon.emc: Completed initialization (0)
[    8.505207] tegra_actmon.avp: Completed initialization (0)
[    8.699776] tegra dvfs: tegra sysfs cap interface is initialized
[    8.707917] tegra dvfs: tegra sysfs gpu & emc interface is initialized
[    8.717474] Set maximum possible CPU frequency 1734000
[    8.724863] ALSA device list:
[    8.729419]   #0: HDA NVIDIA Tegra at 0x70038000 irq 113
[    8.736349]   #1: tegra-snd-t210ref-mobile-rt565x
[    8.742913] Freeing unused kernel memory: 428K (ffffffc00114f000 - ffffffc0011ba000)
[    8.752348] Freeing alternatives memory: 52K (ffffffc0011bb000 - ffffffc0011c8000)
[    8.799129] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    8.896399] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    8.916616] systemd[1]: Detected architecture arm64.
[    8.941071] systemd[1]: Set hostname to <tegra-ubuntu>.
[    9.097902] systemd[1]: Reached target Swap.
[    9.120312] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.150236] systemd[1]: Listening on Syslog Socket.
[    9.170185] systemd[1]: Reached target User and Group Name Lookups.
[    9.200226] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    9.230257] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.260455] systemd[1]: Created slice System Slice.
[    9.280336] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    9.310233] systemd[1]: Listening on udev Kernel Socket.
[    9.330179] systemd[1]: Reached target Remote File Systems (Pre).
[    9.360178] systemd[1]: Reached target Encrypted Volumes.
[    9.380288] systemd[1]: Created slice User and Session Slice.
[    9.400174] systemd[1]: Reached target Slices.
[    9.420233] systemd[1]: Listening on udev Control Socket.
[    9.440242] systemd[1]: Listening on Journal Socket.
[    9.460991] systemd[1]: Starting Set console keymap...
[    9.481293] systemd[1]: Starting Journal Service...
[    9.501129] systemd[1]: Starting Remount Root and Kernel File Systems...
[    9.531110] systemd[1]: Started Braille Device Support.
[    9.576576] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    9.612797] systemd[1]: Starting Load Kernel Modules...
[    9.627204] gpio wake52 for gpio=61
[    9.641162] systemd[1]: Mounting Debug File System...
[    9.661084] systemd[1]: Mounting POSIX Message Queue File System...
[    9.690215] systemd[1]: Reached target Remote File Systems.
[    9.712299] systemd[1]: Mounted POSIX Message Queue File System.
[    9.740214] systemd[1]: Mounted Debug File System.
[    9.760305] systemd[1]: Started Journal Service.
[   10.148053] systemd-journald[169]: Received request to flush runtime journal from PID 1
[   10.625586] cfg80211: Calling CRDA to update world regulatory domain
[   10.635001] sdhci-tegra sdhci-tegra.1: Card already in requested state
[   10.635188] sdhci-tegra sdhci-tegra.1: Card already in requested state
[   10.723027] dhd_module_init in
[   10.723877] Power-up adapter 'DHD generic adapter'
[   10.732754] wifi_platform_set_power = 1
[   10.940163] wifi_platform_bus_enumerate device present 1
[   10.956057] wifi_platform_bus_enumerate device present 0
[   10.956424] SDIO Vendor ID:02d0 and SDIO Device ID: 4354
[   10.956564] F1 signature read @0x18000000=0x17214354
[   10.962114] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2
[   10.962848] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[   10.962931] wifi_platform_prealloc: failed to alloc static mem section 7
[   10.962939] wifi_platform_get_mac_addr
[   10.963238] of_get_mac_address: checking /chosen dtb node for mac address property nvidia,wifi-mac
[   10.963323] wifi_get_mac_addr: 00:04:4b:58:2e:89
[   10.964434]  wl_setup_wiphy : Registering Vendor80211
[   10.974513] wl_create_event_handler(): thread:wl_event_handler:1e8 started
[   10.974665] dhd_attach(): thread:dhd_watchdog_thread:1ec started
[   10.974694] dhd_attach(): thread:dhd_dpc:1ed started
[   10.974729] dhd_attach(): thread:dhd_rxf:1ee started
[   10.974739] dhd_deferred_work_init: work queue initialized 
[   10.974804]  wl_event_handler : tsk Enter, tsk = 0xffffffc0eeb819f0
[   10.975048] Dongle Host Driver, version 1.201.82 (r)
               Compiled in drivers/net/wireless/bcmdhd on Nov  9 2016 at 19:41:48
[   10.975340] Register interface [wlan0]  MAC: 00:04:4b:58:2e:89

[   10.975349] dhd_prot_ioctl : bus is down. we have nothing to do
[   10.976980] wifi_platform_set_power = 0
[   11.180160] tegra_sysfs_register
[   11.276818] cfg80211: World regulatory domain updated:
[   11.276827] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.276832] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   11.276836] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   11.276841] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   11.276844] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   11.276848] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   11.276852] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[   11.276855] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   11.276859] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[   12.796683] gk20a gpu.0: GPCPLL initial settings: NA mode, M=1, N=34, P=3
[   12.954084] tegradc tegradc.1: blank - powerdown
[   12.977333] tegradc tegradc.1: unblank
[   12.980449] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.024258] tegradc tegradc.1: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000
[   13.375351] tegradc tegradc.1: unblank
[   14.053980] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   14.093429] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   14.109447] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   14.130894] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   14.132759] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   14.135329] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   14.147361] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   14.149221] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   14.161499] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   14.181193] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   14.208552] HDA: No HDMI device connected
[   14.208984] HDA: No HDMI device connected
[   14.209390] HDA: No HDMI device connected
[   14.259658] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.259679] Bluetooth: BNEP socket layer initialized
[   14.614670] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   17.256227] tegradc tegradc.1: blank - powerdown
[   17.275586] tegradc tegradc.1: unblank
[   17.329895] tegradc tegradc.1: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000
[   17.681855] tegradc tegradc.1: unblank
[   25.197565] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.