./tegraflash.py --chip 0x18 --applet "/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/mb1_recovery_prod.bin" --cmd "dump eeprom boardinfo cvm.bin" --skipuid Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0080 ] Generating RCM messages [ 0.0087 ] tegrarcm_v2 --listrcm rcm_list.xml --chip 0x18 --download rcm /home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/mb1_recovery_prod.bin 0 0 [ 0.0092 ] RCM 0 is saved as rcm_0.rcm [ 0.0201 ] RCM 1 is saved as rcm_1.rcm [ 0.0201 ] List of rcm files are saved in rcm_list.xml [ 0.0201 ] [ 0.0202 ] Signing RCM messages [ 0.0281 ] tegrasign_v2 --key None --list rcm_list.xml --pubkeyhash pub_key.key [ 0.0293 ] Assuming zero filled SBK key [ 0.0378 ] [ 0.0379 ] Copying signature to RCM mesages [ 0.0393 ] tegrarcm_v2 --chip 0x18 --updatesig rcm_list_signed.xml [ 0.0413 ] [ 0.0413 ] Boot Rom communication [ 0.0425 ] tegrarcm_v2 --chip 0x18 --rcm rcm_list_signed.xml --skipuid [ 0.0439 ] RCM version 0X180001 [ 0.1046 ] Boot Rom communication completed [ 1.1112 ] [ 6.1131 ] Retrieving EEPROM data [ 6.1132 ] tegrarcm_v2 --oem platformdetails eeprom cvm /home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/cvm.bin [ 6.1147 ] Applet version 01.00.0000 [ 6.2681 ] Saved platform info in /home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/cvm.bin [ 6.3480 ] Board version(B00) copying bctfile(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/t186ref/BCT/P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg)... done. copying misc_config(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/t186ref/BCT/tegra186-mb1-bct-misc-si-l4t.cfg)... done. copying pinmux_config(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/t186ref/BCT/tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg)... done. copying pmic_config(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/t186ref/BCT/tegra186-mb1-bct-pmic-quill-p3310-1000-c03.cfg)... done. copying pmc_config(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/t186ref/BCT/tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg)... done. copying prod_config(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/t186ref/BCT/tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg)... done. copying scr_config(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/t186ref/BCT/minimal_scr.cfg)... done. copying bootrom_config(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/t186ref/BCT/tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg)... done. copying dev_params(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/t186ref/BCT/emmc.cfg)... done. Existing bootloader(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/nvtboot_cpu.bin) reused. copying initrd(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/l4t_initrd.img)... done. populating kernel to rootfs... done. populating initrd to rootfs... done. populating extlinux.conf.emmc to rootfs... done. populating /home/lsa/64_TX2/Linux_for_Tegra_tx2/kernel/dtb/tegra186-quill-p3310-1000-c03-00-base.dtb to rootfs... done. done. Making Boot image... done. Existing sosfile(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/mb1_recovery_prod.bin) reused. copying tegraboot(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/t186ref/nvtboot.bin)... done. Existing mb2blfile(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/nvtboot_recovery.bin) reused. Existing mtspreboot(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/preboot_d15_prod_cr.bin) reused. Existing mts(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/mce_mts_d15_prod_cr.bin) reused. Existing mb1file(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/mb1_prod.bin) reused. Existing bpffile(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/bpmp.bin) reused. copying bpfdtbfile(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/t186ref/tegra186-a02-bpmp-quill-p3310-1000-c01-00-te770d-ucm2.dtb)... done. Existing scefile(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/camera-rtcpu-sce.bin) reused. Existing spefile(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/spe.bin) reused. copying wb0boot(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/t186ref/warmboot.bin)... done. Existing tosfile(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/tos.img) reused. Existing eksfile(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/eks.img) reused. copying dtbfile(/home/lsa/64_TX2/Linux_for_Tegra_tx2/kernel/dtb/tegra186-quill-p3310-1000-c03-00-base.dtb)... done. Reusing existing system.img... done. Existing tbcfile(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/cboot.bin) reused. copying tbcdtbfile(/home/lsa/64_TX2/Linux_for_Tegra_tx2/kernel/dtb/tegra186-quill-p3310-1000-c03-00-base.dtb)... done. copying cfgfile(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/t186ref/cfg/flash_l4t_t186.xml) to flash.xml... done. Existing flasher(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/nvtboot_recovery_cpu.bin) reused. Existing flashapp(/home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/tegraflash.py) reused. ./tegraflash.py --bl nvtboot_recovery_cpu.bin --sdram_config P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --odmdata 0x1090000 --applet mb1_recovery_prod.bin --cmd "flash;reboot" --cfg flash.xml --chip 0x18 --misc_config tegra186-mb1-bct-misc-si-l4t.cfg --pinmux_config tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmic_config tegra186-mb1-bct-pmic-quill-p3310-1000-c03.cfg --pmc_config tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --prod_config tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg --scr_config minimal_scr.cfg --br_cmd_config tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --dev_params emmc.cfg --bins "mb2_bootloader nvtboot_recovery.bin; mts_preboot preboot_d15_prod_cr.bin; mts_bootpack mce_mts_d15_prod_cr.bin; bpmp_fw bpmp.bin; bpmp_fw_dtb tegra186-a02-bpmp-quill-p3310-1000-c01-00-te770d-ucm2.dtb; tlk tos.img; eks eks.img; bootloader_dtb tegra186-quill-p3310-1000-c03-00-base.dtb" saving flash command in /home/lsa/64_TX2/Linux_for_Tegra_tx2/bootloader/flashcmd.txt ./tegraflash.py --bl nvtboot_recovery_cpu.bin --sdram_config P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --odmdata 0x1090000 --applet mb1_recovery_prod.bin --cmd "flash;reboot" --cfg flash.xml --chip 0x18 --misc_config tegra186-mb1-bct-misc-si-l4t.cfg --pinmux_config tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmic_config tegra186-mb1-bct-pmic-quill-p3310-1000-c03.cfg --pmc_config tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --prod_config tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg --scr_config minimal_scr.cfg --br_cmd_config tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --dev_params emmc.cfg --bins "mb2_bootloader nvtboot_recovery.bin; mts_preboot preboot_d15_prod_cr.bin; mts_bootpack mce_mts_d15_prod_cr.bin; bpmp_fw bpmp.bin; bpmp_fw_dtb tegra186-a02-bpmp-quill-p3310-1000-c01-00-te770d-ucm2.dtb; tlk tos.img; eks eks.img; bootloader_dtb tegra186-quill-p3310-1000-c03-00-base.dtb" *** Flashing target device started. *** Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0007 ] tegrasign_v2 --key None --getmode mode.txt [ 0.0012 ] Assuming zero filled SBK key [ 0.0013 ] [ 0.0013 ] Generating RCM messages [ 0.0021 ] tegrarcm_v2 --listrcm rcm_list.xml --chip 0x18 --download rcm mb1_recovery_prod.bin 0 0 [ 0.0027 ] RCM 0 is saved as rcm_0.rcm [ 0.0030 ] RCM 1 is saved as rcm_1.rcm [ 0.0030 ] List of rcm files are saved in rcm_list.xml [ 0.0030 ] [ 0.0030 ] Signing RCM messages [ 0.0036 ] tegrasign_v2 --key None --list rcm_list.xml --pubkeyhash pub_key.key [ 0.0041 ] Assuming zero filled SBK key [ 0.0072 ] [ 0.0072 ] Copying signature to RCM mesages [ 0.0078 ] tegrarcm_v2 --chip 0x18 --updatesig rcm_list_signed.xml [ 0.0085 ] [ 0.0086 ] Parsing partition layout [ 0.0181 ] tegraparser_v2 --pt flash.xml.tmp [ 0.0249 ] [ 0.0249 ] Creating list of images to be signed [ 0.0352 ] tegrahost_v2 --chip 0x18 --partitionlayout flash.xml.bin --list images_list.xml zerosbk [ 0.0798 ] [ 0.0798 ] Generating signatures [ 0.0811 ] tegrasign_v2 --key None --list images_list.xml --pubkeyhash pub_key.key [ 0.0819 ] Assuming zero filled SBK key [ 0.1828 ] [ 0.1828 ] Generating br-bct [ 0.1898 ] Updating dev and MSS params in BR BCT [ 0.1898 ] tegrabct_v2 --dev_param emmc.cfg --sdram P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --brbct br_bct.cfg --chip 0x18 [ 0.1906 ] MB1 BCT version is : c [ 0.1966 ] Copying Sdram info from 0 to 1 set [ 0.2086 ] Copying Sdram info from 1 to 2 set [ 0.2086 ] Copying Sdram info from 2 to 3 set [ 0.2086 ] [ 0.2086 ] Updating bl info [ 0.2094 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 --updateblinfo flash.xml.bin --updatesig images_list_signed.xml [ 0.2114 ] [ 0.2114 ] Updating Odmdata [ 0.2120 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 --updatefields Odmdata =0x1090000 [ 0.2133 ] [ 0.2133 ] Get Signed section bct [ 0.2148 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 --listbct bct_list.xml [ 0.2166 ] [ 0.2166 ] Signing BCT [ 0.2180 ] tegrasign_v2 --key None --list bct_list.xml --pubkeyhash pub_key.key [ 0.2195 ] Assuming zero filled SBK key [ 0.2200 ] [ 0.2200 ] Updating BCT with signature [ 0.2216 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 --updatesig bct_list_signed.xml [ 0.2231 ] [ 0.2232 ] Generating coldboot mb1-bct [ 0.2238 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_cold_boot_bct.cfg --sdram P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --misc tegra186-mb1-bct-misc-si-l4t.cfg --scr minimal_scr.cfg --pinmux tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmc tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --pmic tegra186-mb1-bct-pmic-quill-p3310-1000-c03.cfg --brcommand tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --prod tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg [ 0.2247 ] MB1 BCT version is : c [ 0.2249 ] Copying Sdram info from 0 to 1 set [ 0.2323 ] Copying Sdram info from 1 to 2 set [ 0.2325 ] Copying Sdram info from 2 to 3 set [ 0.2326 ] Packing sdram param for instance[0] [ 0.2327 ] Packing sdram param for instance[1] [ 0.2329 ] Packing sdram param for instance[2] [ 0.2330 ] Packing sdram param for instance[3] [ 0.2331 ] Parsing platform config file :tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg [ 0.2334 ] Appending platform config data of size :- 2904 [ 0.2336 ] Parsing platform config file :minimal_scr.cfg [ 0.2338 ] Appending platform config data of size :- 12240 [ 0.2344 ] Parsing platform config file :tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg [ 0.2347 ] Appending platform config data of size :- 24 [ 0.2347 ] [ 0.2347 ] Parsing platform config file :tegra186-mb1-bct-pmic-quill-p3310-1000-c03.cfg [ 0.2347 ] Appending platform config data of size :- 684 [ 0.2347 ] [ 0.2347 ] Parsing platform config file :tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg [ 0.2347 ] Appending platform config data of size :- 64 [ 0.2347 ] [ 0.2347 ] Parsing platform config file :tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg [ 0.2347 ] Appending platform config data of size :- 1628 [ 0.2347 ] [ 0.2348 ] Updating mb1-bct with firmware information [ 0.2358 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo flash.xml.bin [ 0.2370 ] [ 0.2378 ] tegrahost_v2 --align mb1_cold_boot_bct_MB1.bct [ 0.2387 ] [ 0.2397 ] tegrahost_v2 --appendsigheader mb1_cold_boot_bct_MB1.bct zerosbk [ 0.2407 ] [ 0.2422 ] tegrasign_v2 --key None --list mb1_cold_boot_bct_MB1_sigheader.bct_list.xml [ 0.2431 ] Assuming zero filled SBK key [ 0.2447 ] [ 0.2467 ] tegrahost_v2 --updatesigheader mb1_cold_boot_bct_MB1_sigheader.bct.encrypt mb1_cold_boot_bct_MB1_sigheader.bct.hash zerosbk [ 0.2486 ] [ 0.2486 ] Generating recovery mb1-bct [ 0.2498 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_bct.cfg --sdram P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --misc tegra186-mb1-bct-misc-si-l4t.cfg --scr minimal_scr.cfg --pinmux tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmc tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --pmic tegra186-mb1-bct-pmic-quill-p3310-1000-c03.cfg --brcommand tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --prod tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg [ 0.2512 ] MB1 BCT version is : c [ 0.2515 ] Copying Sdram info from 0 to 1 set [ 0.2618 ] Copying Sdram info from 1 to 2 set [ 0.2619 ] Copying Sdram info from 2 to 3 set [ 0.2620 ] Packing sdram param for instance[0] [ 0.2622 ] Packing sdram param for instance[1] [ 0.2623 ] Packing sdram param for instance[2] [ 0.2625 ] Packing sdram param for instance[3] [ 0.2626 ] Parsing platform config file :tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg [ 0.2629 ] Appending platform config data of size :- 2904 [ 0.2631 ] Parsing platform config file :minimal_scr.cfg [ 0.2633 ] Appending platform config data of size :- 12240 [ 0.2639 ] Parsing platform config file :tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg [ 0.2642 ] Appending platform config data of size :- 24 [ 0.2642 ] [ 0.2642 ] Parsing platform config file :tegra186-mb1-bct-pmic-quill-p3310-1000-c03.cfg [ 0.2642 ] Appending platform config data of size :- 684 [ 0.2642 ] [ 0.2642 ] Parsing platform config file :tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg [ 0.2642 ] Appending platform config data of size :- 64 [ 0.2642 ] [ 0.2642 ] Parsing platform config file :tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg [ 0.2642 ] Appending platform config data of size :- 1628 [ 0.2642 ] [ 0.2642 ] Updating mb1-bct with firmware information [ 0.2648 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_bct_MB1.bct --updatefwinfo flash.xml.bin [ 0.2661 ] [ 0.2667 ] tegrahost_v2 --align mb1_bct_MB1.bct [ 0.2676 ] [ 0.2684 ] tegrahost_v2 --appendsigheader mb1_bct_MB1.bct zerosbk [ 0.2694 ] [ 0.2709 ] tegrasign_v2 --key None --list mb1_bct_MB1_sigheader.bct_list.xml [ 0.2717 ] Assuming zero filled SBK key [ 0.2739 ] [ 0.2752 ] tegrahost_v2 --updatesigheader mb1_bct_MB1_sigheader.bct.encrypt mb1_bct_MB1_sigheader.bct.hash zerosbk [ 0.2762 ] [ 0.2763 ] Copying signatures [ 0.2771 ] tegrahost_v2 --chip 0x18 --partitionlayout flash.xml.bin --updatesig images_list_signed.xml [ 0.2843 ] [ 0.2844 ] Boot Rom communication [ 0.2851 ] tegrarcm_v2 --chip 0x18 --rcm rcm_list_signed.xml [ 0.2857 ] BootRom is not running [ 0.3827 ] [ 5.3879 ] Retrieving board information [ 5.3897 ] tegrarcm_v2 --oem platformdetails chip chip_info.bin [ 5.3912 ] Applet version 01.00.0000 [ 5.5440 ] Saved platform info in chip_info.bin [ 5.5467 ] Chip minor revision: 2 [ 5.5481 ] [ 5.5481 ] Sending BCTs [ 5.5488 ] tegrarcm_v2 --download bct_bootrom br_bct_BR.bct --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt [ 5.5493 ] Applet version 01.00.0000 [ 5.7198 ] Sending bct_bootrom [ 5.7199 ] [................................................] 100% [ 5.7304 ] Sending bct_mb1 [ 5.7373 ] [................................................] 100% [ 6.0833 ] [ 6.0833 ] Generating blob [ 6.0852 ] tegrahost_v2 --align blob_nvtboot_recovery_cpu.bin [ 6.0869 ] [ 6.0884 ] tegrahost_v2 --appendsigheader blob_nvtboot_recovery_cpu.bin zerosbk [ 6.0905 ] [ 6.0922 ] tegrasign_v2 --key None --list blob_nvtboot_recovery_cpu_sigheader.bin_list.xml [ 6.0932 ] Assuming zero filled SBK key [ 6.1036 ] [ 6.1058 ] tegrahost_v2 --updatesigheader blob_nvtboot_recovery_cpu_sigheader.bin.encrypt blob_nvtboot_recovery_cpu_sigheader.bin.hash zerosbk [ 6.1080 ] [ 6.1095 ] tegrahost_v2 --align blob_nvtboot_recovery.bin [ 6.1107 ] [ 6.1115 ] tegrahost_v2 --appendsigheader blob_nvtboot_recovery.bin zerosbk [ 6.1126 ] [ 6.1136 ] tegrasign_v2 --key None --list blob_nvtboot_recovery_sigheader.bin_list.xml [ 6.1142 ] Assuming zero filled SBK key [ 6.1159 ] [ 6.1182 ] tegrahost_v2 --updatesigheader blob_nvtboot_recovery_sigheader.bin.encrypt blob_nvtboot_recovery_sigheader.bin.hash zerosbk [ 6.1198 ] [ 6.1213 ] tegrahost_v2 --align blob_preboot_d15_prod_cr.bin [ 6.1227 ] [ 6.1236 ] tegrahost_v2 --appendsigheader blob_preboot_d15_prod_cr.bin zerosbk [ 6.1244 ] [ 6.1260 ] tegrasign_v2 --key None --list blob_preboot_d15_prod_cr_sigheader.bin_list.xml [ 6.1266 ] Assuming zero filled SBK key [ 6.1283 ] [ 6.1302 ] tegrahost_v2 --updatesigheader blob_preboot_d15_prod_cr_sigheader.bin.encrypt blob_preboot_d15_prod_cr_sigheader.bin.hash zerosbk [ 6.1316 ] [ 6.1330 ] tegrahost_v2 --align blob_mce_mts_d15_prod_cr.bin [ 6.1336 ] [ 6.1342 ] tegrahost_v2 --appendsigheader blob_mce_mts_d15_prod_cr.bin zerosbk [ 6.1411 ] [ 6.1429 ] tegrasign_v2 --key None --list blob_mce_mts_d15_prod_cr_sigheader.bin_list.xml [ 6.1437 ] Assuming zero filled SBK key [ 6.2029 ] [ 6.2047 ] tegrahost_v2 --updatesigheader blob_mce_mts_d15_prod_cr_sigheader.bin.encrypt blob_mce_mts_d15_prod_cr_sigheader.bin.hash zerosbk [ 6.2075 ] [ 6.2087 ] tegrahost_v2 --align blob_bpmp.bin [ 6.2092 ] [ 6.2098 ] tegrahost_v2 --appendsigheader blob_bpmp.bin zerosbk [ 6.2111 ] [ 6.2122 ] tegrasign_v2 --key None --list blob_bpmp_sigheader.bin_list.xml [ 6.2128 ] Assuming zero filled SBK key [ 6.2306 ] [ 6.2314 ] tegrahost_v2 --updatesigheader blob_bpmp_sigheader.bin.encrypt blob_bpmp_sigheader.bin.hash zerosbk [ 6.2326 ] [ 6.2332 ] tegrahost_v2 --align blob_tegra186-a02-bpmp-quill-p3310-1000-c01-00-te770d-ucm2.dtb [ 6.2337 ] [ 6.2343 ] tegrahost_v2 --appendsigheader blob_tegra186-a02-bpmp-quill-p3310-1000-c01-00-te770d-ucm2.dtb zerosbk [ 6.2353 ] [ 6.2360 ] tegrasign_v2 --key None --list blob_tegra186-a02-bpmp-quill-p3310-1000-c01-00-te770d-ucm2_sigheader.dtb_list.xml [ 6.2365 ] Assuming zero filled SBK key [ 6.2452 ] [ 6.2461 ] tegrahost_v2 --updatesigheader blob_tegra186-a02-bpmp-quill-p3310-1000-c01-00-te770d-ucm2_sigheader.dtb.encrypt blob_tegra186-a02-bpmp-quill-p3310-1000-c01-00-te770d-ucm2_sigheader.dtb.hash zerosbk [ 6.2471 ] [ 6.2477 ] tegrahost_v2 --align blob_tos.img [ 6.2482 ] [ 6.2488 ] tegrahost_v2 --appendsigheader blob_tos.img zerosbk [ 6.2494 ] [ 6.2501 ] tegrasign_v2 --key None --list blob_tos_sigheader.img_list.xml [ 6.2506 ] Assuming zero filled SBK key [ 6.2522 ] [ 6.2529 ] tegrahost_v2 --updatesigheader blob_tos_sigheader.img.encrypt blob_tos_sigheader.img.hash zerosbk [ 6.2535 ] [ 6.2541 ] tegrahost_v2 --align blob_eks.img [ 6.2547 ] [ 6.2552 ] tegrahost_v2 --appendsigheader blob_eks.img zerosbk [ 6.2558 ] [ 6.2565 ] tegrasign_v2 --key None --list blob_eks_sigheader.img_list.xml [ 6.2570 ] Assuming zero filled SBK key [ 6.2571 ] [ 6.2579 ] tegrahost_v2 --updatesigheader blob_eks_sigheader.img.encrypt blob_eks_sigheader.img.hash zerosbk [ 6.2585 ] [ 6.2593 ] tegrahost_v2 --generateblob blob.xml blob.bin [ 6.2599 ] number of images in blob are 9 [ 6.2600 ] blobsize is 3497944 [ 6.2601 ] Added binary blob_nvtboot_recovery_cpu_sigheader.bin.encrypt of size 144272 [ 6.2612 ] Added binary blob_nvtboot_recovery_sigheader.bin.encrypt of size 60096 [ 6.2614 ] Added binary blob_preboot_d15_prod_cr_sigheader.bin.encrypt of size 59824 [ 6.2617 ] Added binary blob_mce_mts_d15_prod_cr_sigheader.bin.encrypt of size 2077344 [ 6.2620 ] Added binary blob_bpmp_sigheader.bin.encrypt of size 524880 [ 6.2624 ] Added binary blob_tegra186-a02-bpmp-quill-p3310-1000-c01-00-te770d-ucm2_sigheader.dtb.encrypt of size 327072 [ 6.2628 ] Added binary blob_tos_sigheader.img.encrypt of size 54784 [ 6.2630 ] Added binary blob_eks_sigheader.img.encrypt of size 1488 [ 6.2632 ] Added binary blob_tegra186-quill-p3310-1000-c03-00-base.dtb of size 248032 [ 6.2642 ] [ 6.2643 ] Sending bootloader and pre-requisite binaries [ 6.2650 ] tegrarcm_v2 --download blob blob.bin [ 6.2655 ] Applet version 01.00.0000 [ 6.4160 ] Sending blob [ 6.4161 ] [................................................] 100% [ 6.8268 ] [ 6.8275 ] tegrarcm_v2 --boot recovery [ 6.8280 ] Applet version 01.00.0000 [ 6.9817 ] [ 11.9868 ] Retrieving storage infomation [ 11.9876 ] tegrarcm_v2 --oem platformdetails storage storage_info.bin [ 11.9881 ] Applet is not running on device. Continue with Bootloader [ 12.1398 ] [ 12.1627 ] tegradevflash_v2 --oem platformdetails storage storage_info.bin [ 12.1639 ] Bootloader version 01.00.0000 [ 12.2841 ] Saved platform info in storage_info.bin [ 12.2913 ] [ 12.2914 ] Flashing the device [ 12.2930 ] tegraparser_v2 --storageinfo storage_info.bin --generategpt --pt flash.xml.bin [ 12.2949 ] [ 12.2959 ] tegradevflash_v2 --pt flash.xml.bin --create [ 12.2972 ] Bootloader version 01.00.0000 [ 12.3722 ] Erasing sdmmc_boot: 3 ......... [Done] [ 12.4023 ] Writing partition secondary_gpt with gpt_secondary_0_3.bin [ 12.4025 ] [................................................] 100% [ 12.4724 ] Erasing sdmmc_user: 3 ......... [Done] [ 13.6082 ] Writing partition master_boot_record with mbr_1_3.bin [ 13.6087 ] [................................................] 100% [ 13.6181 ] Writing partition primary_gpt with gpt_primary_1_3.bin [ 13.6232 ] [................................................] 100% [ 13.6328 ] Writing partition secondary_gpt with gpt_secondary_1_3.bin [ 13.6494 ] [................................................] 100% [ 13.6751 ] Writing partition mb1 with mb1_prod.bin.encrypt [ 13.6753 ] [................................................] 100% [ 13.6877 ] Writing partition spe-fw with spe_sigheader.bin.encrypt [ 13.7124 ] [................................................] 100% [ 13.7236 ] Writing partition mb2 with nvtboot_sigheader.bin.encrypt [ 13.7541 ] [................................................] 100% [ 13.7652 ] Writing partition mts-preboot with preboot_d15_prod_cr_sigheader.bin.encrypt [ 13.7978 ] [................................................] 100% [ 13.8099 ] Writing partition master_boot_record with mbr_1_3.bin [ 13.8470 ] [................................................] 100% [ 13.8564 ] Writing partition APP with system.img [ 13.8618 ] [................................................] 100% [ 175.8061 ] Writing partition mts-bootpack with mce_mts_d15_prod_cr_sigheader.bin.encrypt [ 175.8237 ] [......................... ] 050% [ 175.8237 ] [................................................] 100% [ 175.9170 ] Writing partition cpu-bootloader with cboot_sigheader.bin.encrypt [ 175.9355 ] [................................................] 100% [ 175.9523 ] Writing partition bootloader-dtb with tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt [ 175.9611 ] [................................................] 100% [ 175.9789 ] Writing partition secure-os with tos_sigheader.img.encrypt [ 175.9886 ] [................................................] 100% [ 176.0002 ] Writing partition eks with eks_sigheader.img.encrypt [ 176.0066 ] [................................................] 100% [ 176.0162 ] Writing partition bpmp-fw with bpmp_sigheader.bin.encrypt [ 176.0223 ] [................................................] 100% [ 176.0490 ] Writing partition bpmp-fw-dtb with tegra186-a02-bpmp-quill-p3310-1000-c01-00-te770d-ucm2_sigheader.dtb.encrypt [ 176.0625 ] [................................................] 100% [ 176.0829 ] Writing partition sce-fw with camera-rtcpu-sce_sigheader.bin.encrypt [ 176.0948 ] [................................................] 100% [ 176.1067 ] Writing partition sc7 with warmboot_wbheader.bin.encrypt [ 176.1140 ] [................................................] 100% [ 176.1242 ] Writing partition kernel with boot.img [ 176.1303 ] [................................................] 100% [ 176.4451 ] Writing partition kernel-dtb with tegra186-quill-p3310-1000-c03-00-base.dtb [ 176.4563 ] [................................................] 100% [ 176.4850 ] [ 176.4868 ] tegradevflash_v2 --write BCT br_bct_BR.bct [ 176.4883 ] Bootloader version 01.00.0000 [ 176.5522 ] Writing partition BCT with br_bct_BR.bct [ 176.5526 ] [................................................] 100% [ 176.6026 ] [ 176.6114 ] tegradevflash_v2 --write MB1_BCT mb1_cold_boot_bct_MB1_sigheader.bct.encrypt [ 176.6129 ] Bootloader version 01.00.0000 [ 176.6762 ] Writing partition MB1_BCT with mb1_cold_boot_bct_MB1_sigheader.bct.encrypt [ 176.6770 ] [................................................] 100% [ 176.7263 ] [ 176.7264 ] Flashing completed [ 176.7265 ] Coldbooting the device [ 176.7281 ] tegradevflash_v2 --reboot coldboot [ 176.7297 ] Bootloader version 01.00.0000 [ 176.7976 ] *** The target t186ref has been flashed successfully. *** Reset the board to boot from internal eMMC.