[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.40-gdacac96 (buildbrain@mobile-u64-286) (gcc version 4.5.3 (crosstool-NG hg_unknown@20110628.165246) ) #1 SMP PREEMPT Thu Jun 25 15:25:11 PDT 2015 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: jetson-tk1, model: NVIDIA Tegra124 PM375, serial: 0 [ 0.000000] Truncating memory at 0x80000000 to fit in 32-bit physical address space [ 0.000000] Found tsec, start=0xf4900000 size=2000000 [ 0.000000] Tegra reserved memory: [ 0.000000] LP0: f46ff000 - f46ff80f [ 0.000000] Bootloader framebuffer: 00000000 - 00000000 [ 0.000000] Bootloader framebuffer2: 00000000 - 00000000 [ 0.000000] Framebuffer: f8500000 - f96fffff [ 0.000000] 2nd Framebuffer: f9700000 - fdefffff [ 0.000000] Carveout: 00000000 - 00000000 [ 0.000000] Vpr: 00000000 - 00000000 [ 0.000000] Tsec: f4900000 - f68fffff [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 492288 [ 0.000000] free_area_init_node: node 0, pgdat c0d0fc00, node_mem_map c0e09000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2510 pages used for memmap [ 0.000000] HighMem zone: 297728 pages, LIFO batch:31 [ 0.000000] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/arch/arm/boot/dts/tegra124-jetson_tk1-pm375-000-c00-00.dts [ 0.000000] Tegra12: CPU Speedo value 2353, Soc Speedo value 2314, Gpu Speedo value 2132 [ 0.000000] Tegra12: CPU Speedo ID 1, Soc Speedo ID 1, Gpu Speedo ID 1 [ 0.000000] Tegra12: CPU Process ID 1,Soc Process ID 1,Gpu Process ID 1 [ 0.000000] Tegra Revision: A01 SKU: 0x81 CPU Process: 1 Core Process: 1 [ 0.000000] tegra: PLLP fixed rate: 408000000 [ 0.000000] tegra_clk_shared_bus_user_init: c2bus client se left ON [ 0.000000] tegra_clk_shared_bus_user_init: c4bus client vi left ON [ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1092000000 [ 0.000000] Lowering sbus maximum rate from 420000000 to 384000000 [ 0.000000] Lowering vic03 maximum rate from 900000000 to 828000000 [ 0.000000] Lowering tsec maximum rate from 900000000 to 828000000 [ 0.000000] Lowering msenc maximum rate from 600000000 to 528000000 [ 0.000000] Lowering se maximum rate from 600000000 to 528000000 [ 0.000000] Lowering vde maximum rate from 600000000 to 528000000 [ 0.000000] Lowering host1x maximum rate from 500000000 to 444000000 [ 0.000000] Lowering vi maximum rate from 700000000 to 600000000 [ 0.000000] Lowering isp maximum rate from 700000000 to 600000000 [ 0.000000] Lowering c4bus maximum rate from 700000000 to 600000000 [ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000 [ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1066000000 [ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1066000000 [ 0.000000] Lowering hdmi maximum rate from 594000000 to 297000000 [ 0.000000] Lowering sdmmc1 maximum rate from 208000000 to 204000000 [ 0.000000] Lowering sdmmc3 maximum rate from 208000000 to 204000000 [ 0.000000] Lowering gbus maximum rate from 1032000000 to 852000000 [ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 2320500000 [ 0.000000] tegra dvfs: VDD_CPU nominal 1260mV, scaling enabled [ 0.000000] tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled [ 0.000000] tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled [ 0.000000] Switching to timer-based delay loop [ 0.000000] tegra_powergate_init: DONE [ 0.000000] tegra12_plle_clk_enable: pll_e is already enabled [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1df3000 s15360 r8192 d13312 u36864 [ 0.000000] pcpu-alloc: s15360 r8192 d13312 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 490768 [ 0.000000] Kernel command line: console=ttyS0,115200n8 console=tty1 no_console_suspend=1 lp0_vec=2064@0xf46ff000 mem=2015M@2048M memtype=255 ddr_die=2048M@2048M section=256M pmuboard=0x0177:0x0000:0x02:0x43:0x00 tsec=32M@3913M otf_key=c75e5bb91eb3bd947560357b64422f85 usbcore.old_scheme_first=1 core_edp_mv=1150 core_edp_ma=4000 tegraid=40.1.1.0.0 debug_uartport=lsport,3 power_supply=Adapter audio_codec=rt5640 modem_id=0 android.kerneltype=normal fbcon=map:1 commchip_id=0 usb_port_owner_info=0 lane_owner_info=6 emc_max_dvfs=0 touch_id=0@0 board_info=0x0177:0x0000:0x02:0x43:0x00 root=/dev/mmcblk0p1 rw rootwait tegraboot=sdmmc gpt [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1923MB = 1923MB total [ 0.000000] Memory: 1920996k/1920996k available, 142364k reserved, 1190908K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0b4b1d4 (11533 kB) [ 0.000000] .init : 0xc0b4c000 - 0xc0bcbc00 ( 511 kB) [ 0.000000] .data : 0xc0bcc000 - 0xc0d28c20 (1396 kB) [ 0.000000] .bss : 0xc0d28c20 - 0xc0dc3a4c ( 620 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:960 [ 0.000000] the number of interrupt controllers found is 5 [ 0.000000] Architected local timer running at 12.00MHz (phys). [ 0.000000] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns [ 0.000000] Ignoring duplicate/late registration of read_current_timer delay [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty1] enabled [ 0.003776] Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=12000 [ 0.003847] pid_max: default: 32768 minimum: 301 [ 0.004143] Mount-cache hash table entries: 512 [ 0.027024] Initializing cgroup subsys debug [ 0.027069] Initializing cgroup subsys freezer [ 0.027155] CPU: Testing write buffer coherency: ok [ 0.027226] ftrace: allocating 33222 entries in 65 pages [ 0.069790] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.069835] Setting up static identity map for 0xc0815ef0 - 0xc0815f94 [ 0.073826] ftrace: Allocated trace_printk buffers [ 0.080502] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.083536] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.086579] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.086775] Brought up 4 CPUs [ 0.086839] SMP: Total of 4 processors activated. [ 0.086855] CPU: All CPU(s) started in SVC mode. [ 0.087711] devtmpfs: initialized [ 0.096804] pinctrl core: initialized pinctrl subsystem [ 0.097134] regulator-dummy: no parameters [ 0.097816] NET: Registered protocol family 16 [ 0.100227] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.101503] tegra_smmu tegra_smmu: Loaded Tegra IOMMU driver [ 0.102543] console [pstore-1] enabled [ 0.102581] ramoops: attached 0x200000@0xf8300000, ecc: 0/0 [ 0.102965] cpuidle: using governor ladder [ 0.102989] cpuidle: using governor menu [ 0.106848] ardbeg_camera_auxdata: update camera lookup table. [ 0.115880] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default [ 0.116289] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio [ 0.123194] Wake16 for irq=34 [ 0.125678] Wake58 for irq=81 [ 0.125728] Wake41 for irq=129 [ 0.125747] Wake43 for irq=129 [ 0.125793] Wake40 for irq=53 [ 0.125811] Wake42 for irq=53 [ 0.130160] board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x45:0x44:0x00 [ 0.130247] board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x45:0x44:0x00 [ 0.130330] disp1 pclk=154700000 [ 0.130340] disp2 pclk=297000000 [ 0.130349] Selecting UARTD as the debug console [ 0.130399] The debug console clock name is uartd [ 0.130829] ardbeg_modem_init: modem_id = 0 [ 0.133532] Clear bootloader IO dpd settings [ 0.133769] Loading jetson TK1 EMC tables. [ 0.134028] tegra: pll_m is selected as scalable EMC clock source [ 0.134073] Lowering emc maximum rate from 1200000000 to 924000000 [ 0.134101] tegra: validated EMC DFS table [ 0.134232] ardbeg_edp_init: CPU regulator 11000 mA [ 0.493430] ardbeg_edp_init: GPU regulator 11400 mA [ 0.494433] swapper/0 isomgr_init(): iso emc max clk=924000KHz [ 0.494454] swapper/0 isomgr_init(): max_iso_bw=7392000KB<6>[ 0.494828] ardbeg_touch_init init raydium touch [ 0.495001] Raydium - touch platform_id : 8 [ 0.577846] platform tegradc.0: IOVA linear map 0xf8500000(1200000) [ 0.581154] platform tegradc.0: IOVA linear map 0xf9700000(4800000) [ 0.586176] platform tegradc.1: IOVA linear map 0xf8500000(1200000) [ 0.589479] platform tegradc.1: IOVA linear map 0xf9700000(4800000) [ 0.589927] FUSE: cp_rev 0 ft_rev 0 [ 0.590105] tegra11_soctherem_oc_int_init(): OC interrupts are not enabled [ 0.590540] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.590571] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.590833] mc-err: Started MC error interface! [ 0.601589] bio: create slab at 0 [ 0.603501] reg-fixed-voltage 0.regulator: Consumer c1 does not have device name [ 0.603537] reg-fixed-voltage 0.regulator: Consumer c2 does not have device name [ 0.603568] of_get_named_gpio_flags: can't parse gpios property [ 0.603669] vdd-ac-bat: 8400 mV [ 0.603810] reg-fixed-voltage 1.regulator: Consumer c1 does not have device name [ 0.603863] reg-fixed-voltage 1.regulator: Consumer c2 does not have device name [ 0.603894] of_get_named_gpio_flags: can't parse gpios property [ 0.603999] vdd-3v3-aon: 3300 mV [ 0.604152] reg-fixed-voltage 8.regulator: Consumer c1 does not have device name [ 0.604186] reg-fixed-voltage 8.regulator: Consumer c2 does not have device name [ 0.604217] reg-fixed-voltage 8.regulator: Consumer c3 does not have device name [ 0.604254] reg-fixed-voltage 8.regulator: Consumer c6 does not have device name [ 0.604284] reg-fixed-voltage 8.regulator: Consumer c7 does not have device name [ 0.604315] reg-fixed-voltage 8.regulator: Consumer c8 does not have device name [ 0.604345] reg-fixed-voltage 8.regulator: Consumer c9 does not have device name [ 0.604376] reg-fixed-voltage 8.regulator: Consumer c10 does not have device name [ 0.604407] reg-fixed-voltage 8.regulator: Consumer c11 does not have device name [ 0.604439] reg-fixed-voltage 8.regulator: Consumer c12 does not have device name [ 0.604483] of_get_named_gpio_flags: can't parse gpios property [ 0.604573] reg-3v3-supply: 3300 mV [ 0.606241] vgaarb: loaded [ 0.606870] SCSI subsystem initialized [ 0.607079] libata version 3.00 loaded. [ 0.607263] usbcore: registered new interface driver usbfs [ 0.607331] usbcore: registered new interface driver hub [ 0.607439] usbcore: registered new device driver usb [ 0.607669] of_get_named_gpio_flags exited with status 20 [ 0.607689] of_get_named_gpio_flags exited with status 21 [ 0.608129] of_get_named_gpio_flags exited with status 157 [ 0.608148] of_get_named_gpio_flags exited with status 158 [ 0.608378] of_get_named_gpio_flags exited with status 217 [ 0.608396] of_get_named_gpio_flags exited with status 218 [ 0.608629] of_get_named_gpio_flags exited with status 172 [ 0.608647] of_get_named_gpio_flags exited with status 173 [ 0.608880] of_get_named_gpio_flags exited with status 206 [ 0.608898] of_get_named_gpio_flags exited with status 207 [ 0.610347] as3722 4-0040: AS3722 ID: ID1:ID2:ID3 = 0x0c:0x01:0x15 [ 0.610378] as3722 4-0040: Final OTP version 1V21 [ 0.615809] gpiochip_find_base: found new base at 1016 [ 0.615907] gpiochip_add: registered GPIOs 1016 to 1023 on device: as3722-gpio [ 0.615943] GPIO chip as3722-gpio: created GPIO range 0->7 ==> as3722-pinctrl PIN 0->7 [ 0.616135] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.616196] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.616250] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.616282] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.616314] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.616346] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.616404] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.616436] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.616467] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.616499] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.616530] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name [ 0.616561] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name [ 0.616592] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name [ 0.616658] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.616689] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.616720] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.616751] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.616785] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name [ 0.616819] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name [ 0.616850] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name [ 0.616881] as3722-regulator as3722-regulator.0: Consumer c10 does not have device name [ 0.616913] as3722-regulator as3722-regulator.0: Consumer c11 does not have device name [ 0.616945] as3722-regulator as3722-regulator.0: Consumer c12 does not have device name [ 0.616976] as3722-regulator as3722-regulator.0: Consumer c13 does not have device name [ 0.617008] as3722-regulator as3722-regulator.0: Consumer c14 does not have device name [ 0.617059] as3722-regulator as3722-regulator.0: Consumer c15 does not have device name [ 0.617115] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.617147] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.617202] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.617233] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.617264] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.617296] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.617327] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name [ 0.617358] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name [ 0.617389] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name [ 0.617421] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name [ 0.617452] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name [ 0.617510] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.617541] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.617630] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name [ 0.617662] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name [ 0.617693] as3722-regulator as3722-regulator.0: Consumer c10 does not have device name [ 0.617748] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.617800] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.617831] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.617863] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.617919] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.617950] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.618008] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.618088] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.618122] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.618198] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.618230] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.618261] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.619177] vdd-cpu: 650 <--> 1300 mV at 1000 mV 3500 mA [ 0.619942] vdd-core: applied init 1000000uV constraint [ 0.620544] vdd-core: 700 <--> 1350 mV at 1000 mV 3500 mA [ 0.621736] vddio-ddr: at 1350 mV [ 0.622061] as3722-sd3: no parameters [ 0.622660] avdd-pll-pex: 1050 mV [ 0.623870] vdd-1v8: at 1800 mV [ 0.624232] vdd-gpu: applied init 1000000uV constraint [ 0.625105] vdd-gpu: 650 <--> 1200 mV at 1000 mV 3500 mA [ 0.625622] avdd-pll: at 1050 mV at 300 mA [ 0.626896] vdd-cam: 1800 mV at 150 mA [ 0.627572] avdd-dsi-csi: at 1200 mV at 150 mA [ 0.628798] vdd-rtc: 800 mV at 150 mA [ 0.629282] avdd-cam: 2800 mV at 150 mA [ 0.629770] vdd-1v2-cam: 1175 mV at 150 mA [ 0.630138] vddio-sdmmc-2: 1800 <--> 3300 mV at 150 mA [ 0.630664] vdd-1v1-cam: 1275 mV at 150 mA [ 0.631622] avdd-spi: 3300 mV at 150 mA [ 0.632128] vdd-2v7-cam: 2800 mV at 150 mA [ 0.632662] vpp-fuse: 1800 mV at 150 mA [ 0.633258] of_get_named_gpio_flags: can't parse gpios property [ 0.633269] of_get_named_gpio_flags: can't parse gpios property [ 0.633739] Linux video capture interface: v2.00 [ 0.634796] Advanced Linux Sound Architecture Driver Initialized. [ 0.635246] ardbeg_wifi_power: 1 [ 0.736157] of_get_named_gpio_flags exited with status 108 [ 0.736286] usb0-vbus: 5000 mV [ 0.736477] of_get_named_gpio_flags exited with status 109 [ 0.736594] usb1-usb2-vbus: 5000 mV [ 0.736777] of_get_named_gpio_flags exited with status 86 [ 0.736885] vdd-hdmi: 5000 mV [ 0.737086] of_get_named_gpio_flags exited with status 63 [ 0.737198] avdd-hdmi-pll: 3300 mV [ 0.737250] avdd-hdmi-pll: supplied by avdd-pll-pex [ 0.737423] reg-fixed-sync-voltage 6.regulator: Consumer c1 does not have device name [ 0.737468] of_get_named_gpio_flags exited with status 122 [ 0.737570] vdd-lcd-bl: 3300 mV [ 0.737759] reg-fixed-sync-voltage 7.regulator: Consumer c1 does not have device name [ 0.737803] of_get_named_gpio_flags exited with status 58 [ 0.737917] vdd-lcd-bl-en: 5000 mV [ 0.738090] reg-fixed-sync-voltage 9.regulator: Consumer c3 does not have device name [ 0.738123] of_get_named_gpio_flags: can't parse gpios property [ 0.738213] reg-5v0-supply: 5000 mV [ 0.738382] reg-fixed-sync-voltage a.regulator: Consumer c1 does not have device name [ 0.738416] reg-fixed-sync-voltage a.regulator: Consumer c2 does not have device name [ 0.738449] reg-fixed-sync-voltage a.regulator: Consumer c3 does not have device name [ 0.738498] reg-fixed-sync-voltage a.regulator: Consumer c10 does not have device name [ 0.738530] reg-fixed-sync-voltage a.regulator: Consumer c11 does not have device name [ 0.738561] reg-fixed-sync-voltage a.regulator: Consumer c12 does not have device name [ 0.738592] reg-fixed-sync-voltage a.regulator: Consumer c13 does not have device name [ 0.738624] reg-fixed-sync-voltage a.regulator: Consumer c14 does not have device name [ 0.738655] reg-fixed-sync-voltage a.regulator: Consumer c15 does not have device name [ 0.738711] of_get_named_gpio_flags: can't parse gpios property [ 0.738801] reg-1v8-supply: 1800 mV [ 0.739149] reg-fixed-sync-voltage b.regulator: Consumer c1 does not have device name [ 0.739195] of_get_named_gpio_flags exited with status 138 [ 0.739311] reg-dcdc-1v2: 1200 mV [ 0.739489] reg-fixed-sync-voltage c.regulator: Consumer c7 does not have device name [ 0.739523] reg-fixed-sync-voltage c.regulator: Consumer c8 does not have device name [ 0.739566] of_get_named_gpio_flags exited with status 1018 [ 0.740096] as3722-gpio2-supply: 3300 mV [ 0.740307] reg-fixed-sync-voltage d.regulator: Consumer c1 does not have device name [ 0.740354] of_get_named_gpio_flags exited with status 1020 [ 0.740824] as3722-gpio4-supply: 3300 mV [ 0.741006] of_get_named_gpio_flags exited with status 136 [ 0.741135] sdmmc-en-supply: 3300 mV [ 0.741311] of_get_named_gpio_flags exited with status 138 [ 0.741401] vdd-cdc-1v2-aud: 1200 mV [ 0.741560] reg-fixed-sync-voltage 10.regulator: Consumer c1 does not have device name [ 0.741596] reg-fixed-sync-voltage 10.regulator: Consumer c2 does not have device name [ 0.741628] reg-fixed-sync-voltage 10.regulator: Consumer c3 does not have device name [ 0.741658] of_get_named_gpio_flags: can't parse gpios property [ 0.741756] reg-aon-1v8: 1800 mV [ 0.741918] reg-fixed-sync-voltage 11.regulator: Consumer c1 does not have device name [ 0.741950] of_get_named_gpio_flags: can't parse gpios property [ 0.742039] reg-aon-1v2: 1200 mV [ 0.745084] as3722-adc-extcon as3722-adc-extcon.2: USB-Host is connected [ 0.748514] tegra: started io power detection dynamic control [ 0.748541] tegra: NO_IO_POWER setting 0x0 [ 0.748568] Switching to clocksource arch_sys_counter [ 0.770191] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.770383] nvmap_page_pool_init: Total MB RAM: 1891 [ 0.770407] nvmap_page_pool_init: nvmap page pool size: 60543 pages (236 MB) [ 0.770577] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.770779] iram: dma coherent mem declare 0x40001000,258048 [ 0.771587] misc nvmap: created heap iram base 0x40001000 size (252KiB) [ 0.771792] nvmap:inner cache maint threshold=2097152 [ 0.781442] Wake39 for irq=52 [ 0.781542] tegra-otg tegra-otg: otg transceiver registered [ 0.781930] NET: Registered protocol family 2 [ 0.782581] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.782806] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.783009] TCP: Hash tables configured (established 8192 bind 8192) [ 0.783071] TCP: reno registered [ 0.783096] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.783152] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.783451] NET: Registered protocol family 1 [ 0.783851] RPC: Registered named UNIX socket transport module. [ 0.783877] RPC: Registered udp transport module. [ 0.783896] RPC: Registered tcp transport module. [ 0.783916] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.783942] PCI: CLS 0 bytes, default 64 [ 0.784193] tegra-fuse tegra-fuse: Fuse driver initialized succesfully [ 0.789921] host1x host1x: initialized [ 0.791202] CPU PMU: probing PMU on CPU 0 [ 0.791238] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 0.791890] tegra_throttle : init passed [ 0.792011] Tegra cpuquiet initialized: disabled [ 0.792147] cpu-tegra: init EDP limit: 2320 MHz [ 0.793137] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 0.793516] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 0.793779] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type MEM-therm [ 0.794022] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.795531] bounce pool size: 64 pages [ 0.797038] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.797330] NTFS driver 2.1.30 [Flags: R/O]. [ 0.797474] fuse init (API version 7.22) [ 0.797735] msgmni has been set to 1457 [ 0.799176] io scheduler noop registered (default) [ 0.799494] of_get_named_gpio_flags: can't parse gpios property [ 0.799504] of_get_named_gpio_flags: can't parse gpios property [ 0.799513] of_get_named_gpio_flags: can't parse gpios property [ 1.000539] PCIE: port 0: link down, retrying [ 1.200699] PCIE: port 0: link down, retrying [ 1.400828] PCIE: port 0: link down, retrying [ 1.400850] PCIE: port 0: link down, ignoring [ 1.406005] PCI host bridge to bus 0000:00 [ 1.406035] pci_bus 0000:00: root bus resource [mem 0x32100000-0x3fffffff] [ 1.406064] pci_bus 0000:00: root bus resource [mem 0x12100000-0x320fffff pref] [ 1.406095] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 1.406121] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.406180] pci 0000:00:00.0: [10de:0e13] type 01 class 0x060400 [ 1.406275] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.406510] PCI: bus0: Fast back to back transfers disabled [ 1.406540] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.406767] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 1.406800] pci 0000:01:00.0: reg 10: [io 0x0000-0x00ff] [ 1.406847] pci 0000:01:00.0: reg 18: [mem 0x00000000-0x00000fff 64bit] [ 1.406880] pci 0000:01:00.0: reg 20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.406984] pci 0000:01:00.0: supports D1 D2 [ 1.406994] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.408693] PCI: bus1: Fast back to back transfers disabled [ 1.408724] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.408740] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 [ 1.409028] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 1.409058] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.409087] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded [ 1.409204] aer 0000:00:00.0:pcie02: service driver aer loaded [ 1.409299] pcieport 0000:00:00.0: BAR 8: assigned [mem 0x32100000-0x321fffff] [ 1.409333] pcieport 0000:00:00.0: BAR 9: assigned [mem 0x12100000-0x121fffff 64bit pref] [ 1.409366] pcieport 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] [ 1.409398] pci 0000:01:00.0: BAR 4: assigned [mem 0x12100000-0x12103fff 64bit pref] [ 1.409445] pci 0000:01:00.0: BAR 2: assigned [mem 0x32100000-0x32100fff 64bit] [ 1.409490] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 1.409521] pcieport 0000:00:00.0: PCI bridge to [bus 01] [ 1.409547] pcieport 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 1.409575] pcieport 0000:00:00.0: bridge window [mem 0x32100000-0x321fffff] [ 1.409606] pcieport 0000:00:00.0: bridge window [mem 0x12100000-0x121fffff 64bit pref] [ 1.409671] PCIE: No Link speed change happened [ 1.410242] pwm-backlight pwm-backlight: unable to request PWM, trying legacy API [ 1.410354] sysedp_create_consumer: unable to create pwm-backlight, no consumer_data for pwm-backlight found [ 1.411254] tsec tsec: initialized [ 1.412782] isp isp.0: initialized [ 1.413755] isp isp.1: initialized [ 1.415306] falcon vic03.0: initialized [ 1.416513] falcon msenc: initialized [ 1.417353] tegradc tegradc.0: DSI: HS clock rate is 464500 [ 1.418671] p,wuxga-10-1 panel dt support not available [ 1.698559] tegradc tegradc.0: nominal-pclk:154700000 parent:154500000 div:1.0 pclk:154500000 153153000~168623000 [ 1.787818] tegradc tegradc.0: DSI pad calibration done [ 1.794967] tegradc tegradc.0: probed [ 1.795444] tegradc tegradc.0: fb registered [ 1.795468] tegradc tegradc.0: nominal-pclk:154679000 parent:463500000 div:3.0 pclk:154500000 153132210~168600110 [ 1.801335] gpio wake4 for gpio=111 [ 1.816201] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 1.817511] tegradc tegradc.1: probed [ 1.838889] Console: switching to colour frame buffer device 240x67 [ 1.857712] tegradc tegradc.1: fb registered [ 1.857825] hdmi_state_machine_worker (tid edb0a580): state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 1.858005] hdmi_state_machine_set_state_l: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 1.861235] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels [ 1.862079] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.863455] serial8250.0: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra [ 1.899369] hdmi_state_machine_worker (tid edb0a580): state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 1.899376] hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 1.970910] hdmi_state_machine_worker (tid edb0a580): state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 2.001040] panel size 48 by 27 [ 4.170916] console [ttyS0] enabled [ 4.171050] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 4.171574] serial-tegra.0: ttyTHS0 at MMIO 0x70006000 (irq = 68) is a SERIAL_TEGRA [ 4.171897] serial-tegra.1: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA [ 4.172207] serial-tegra.2: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA [ 4.178353] loop: module loaded [ 4.178692] nct1008_nct72 0-004c: success in enabling rail vdd_nct72 [ 4.182448] gpio wake35 for gpio=70 [ 4.182518] nct1008_nct72 0-004c: nct1008_probe: initialized [ 4.183142] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 4.184180] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 4.186142] tegra_profiler: Branch: Dev [ 4.186145] tegra_profiler: Version: 1.103 [ 4.186149] tegra_profiler: Samples version: 34 [ 4.186152] tegra_profiler: IO version: 18 [ 4.186158] armv7_pmu: arch: Cortex A15, type: 4, ver: 0 [ 4.186335] tegra_profiler: auth: init [ 4.186739] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0 [ 4.187460] tegra-sata tegra-sata.0: version 1.0 [ 4.187470] of_get_named_gpio_flags: can't parse gpios property [ 4.188185] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode [ 4.188196] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pmp pio slum part sadm apst [ 4.189409] scsi0 : tegra-sata [ 4.189837] scsi1 : tegra-sata [ 4.190063] ata1: SATA max UDMA/133 irq 55 [ 4.190067] ata2: DUMMY [ 4.192098] tun: Universal TUN/TAP device driver, 1.6 [ 4.192101] tun: (C) 1999-2004 Max Krasnyansky [ 4.192338] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.194476] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf0000000, 00:04:4b:48:f7:eb, XID 0c000800 IRQ 641 [ 4.194484] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 4.194656] usbcore: registered new interface driver asix [ 4.194701] usbcore: registered new interface driver ax88179_178a [ 4.194738] usbcore: registered new interface driver cdc_ether [ 4.194788] usbcore: registered new interface driver smsc95xx [ 4.194825] usbcore: registered new interface driver cdc_subset [ 4.194898] usbcore: registered new interface driver cdc_ncm [ 4.194916] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.195141] tegra USB phy - inst[1] platform info: [ 4.195145] port_otg: no [ 4.195147] has_hostpc: yes [ 4.195150] phy_interface: USB_PHY_INTF_UTMI [ 4.195153] op_mode: TEGRA_USB_OPMODE_HOST [ 4.195155] qc2_voltage: 0 [ 4.195158] vbus_gpio: -1 [ 4.195161] hot_plug: disabled [ 4.195163] remote_wakeup: enabled [ 4.196729] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller [ 4.196754] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1 [ 4.196853] Wake40 for irq=53 [ 4.196857] Wake42 for irq=53 [ 4.196881] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000 [ 4.202680] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.10 [ 4.202768] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.202776] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.202782] usb usb1: Product: Tegra EHCI Host Controller [ 4.202788] usb usb1: Manufacturer: Linux 3.10.40-gdacac96 ehci_hcd [ 4.202794] usb usb1: SerialNumber: tegra-ehci.1 [ 4.203342] hub 1-0:1.0: USB hub found [ 4.203362] hub 1-0:1.0: 1 port detected [ 4.203757] tegra USB phy - inst[2] platform info: [ 4.203760] port_otg: no [ 4.203762] has_hostpc: yes [ 4.203765] phy_interface: USB_PHY_INTF_UTMI [ 4.203768] op_mode: TEGRA_USB_OPMODE_HOST [ 4.203771] qc2_voltage: 0 [ 4.203773] vbus_gpio: -1 [ 4.203776] hot_plug: disabled [ 4.203779] remote_wakeup: enabled [ 4.205237] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller [ 4.205261] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2 [ 4.205348] Wake41 for irq=129 [ 4.205352] Wake43 for irq=129 [ 4.205374] tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000 [ 4.210678] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.10 [ 4.210758] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.210766] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.210772] usb usb2: Product: Tegra EHCI Host Controller [ 4.210778] usb usb2: Manufacturer: Linux 3.10.40-gdacac96 ehci_hcd [ 4.210783] usb usb2: SerialNumber: tegra-ehci.2 [ 4.211294] hub 2-0:1.0: USB hub found [ 4.211312] hub 2-0:1.0: 1 port detected [ 4.211708] ehci-pci: EHCI PCI platform driver [ 4.211979] tegra_xusb_read_usb_calib: usb_calib0 = 0x02448389 [ 4.212230] usbcore: registered new interface driver usb-storage [ 4.212333] usbcore: registered new interface driver usbserial [ 4.212372] usbcore: registered new interface driver option [ 4.212404] usbserial: USB Serial support registered for GSM modem (1-port) [ 4.212504] usbcore: registered new interface driver pl2303 [ 4.212534] usbserial: USB Serial support registered for pl2303 [ 4.212546] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012) [ 4.212712] tegra USB phy - inst[0] platform info: [ 4.212715] port_otg: yes [ 4.212717] has_hostpc: yes [ 4.212720] phy_interface: USB_PHY_INTF_UTMI [ 4.212722] op_mode: TEGRA_USB_OPMODE_DEVICE [ 4.212725] qc2_voltage: 0 [ 4.212727] vbus_pmu_irq: 0 [ 4.212729] vbus_gpio: -1 [ 4.212731] charging: enabled [ 4.212734] remote_wakeup: disabled [ 4.215543] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled [ 4.258850] as3722-rtc as3722-rtc.1: rtc core: registered as3722 as rtc0 [ 4.258857] as3722-rtc as3722-rtc.1: RTC interrupt 449 [ 4.312688] i2c /dev entries driver [ 4.313897] virtual_init [ 4.315945] nvavp nvavp: allocated IOVA at 8ff00000 for AVP os [ 4.316796] tegra_dtv_probe: probing dtv. [ 4.317162] setup_stream: bufsize = 4096, bufnum = 4 [ 4.317163] ar0832_init: ++ [ 4.317526] i2c-core: driver [max77387] using legacy suspend method [ 4.317529] i2c-core: driver [max77387] using legacy resume method [ 4.317579] i2c-core: driver [as364x] using legacy suspend method [ 4.317581] i2c-core: driver [as364x] using legacy resume method [ 4.317751] [IMX135] sensor driver loading [ 4.317799] [IMX179] sensor driver loading [ 4.317845] [IMX185] sensor driver loading [ 4.317895] [imx132] sensor driver loading [ 4.317941] [AR0330] sensor driver loading [ 4.317987] [ar0261] sensor driver loading [ 4.318032] [AR1335] sensor driver loading [ 4.318078] [ov4689] sensor driver loading [ 4.318938] usbcore: registered new interface driver uvcvideo [ 4.318941] USB Video Class driver (1.1.1) [ 4.319827] zram: Created 1 device(s) ... [ 4.321044] tegra_wdt tegra_wdt.0: last reset is due to power on reset [ 4.321212] tegra_wdt_probe done [ 4.321536] sdhci: Secure Digital Host Controller Interface driver [ 4.321539] sdhci: Copyright(c) Pierre Ossman [ 4.321542] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.321927] sdhci-tegra sdhci-tegra.3: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required. [ 4.322091] sdhci-tegra sdhci-tegra.3: Speedo value 2314 [ 4.322099] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100 [ 4.365686] otg state changed: SUSPEND --> PERIPHERAL [ 4.494697] ata1: SATA link down (SStatus 0 SControl 300) [ 5.329002] handle_check_edid_l: audio_switch 1 [ 5.337520] Display connected, hpd_switch 1 [ 5.345673] handle_check_edid_l: setting audio and infoframes [ 5.355407] hdmi_state_machine_set_state_l: switching from state 2 (Check EDID) to state 4 (Enabled) [ 5.368694] hdmi_state_machine_worker (tid edb0a580): state 4 (Enabled), hpd 1, pending_hpd_evt 0 [ 5.382056] mmc0: no vqmmc regulator found [ 5.382073] mmc0: no vmmc regulator found [ 5.382077] mmc0: Invalid maximum block size, assuming 512 bytes [ 5.405688] sysedp_create_consumer: unable to create sdhci-tegra.3, no consumer_data for sdhci-tegra.3 found [ 5.405688] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA [ 5.413013] sdhci-tegra sdhci-tegra.2: Speedo value 2314 [ 5.413022] sdhci-tegra sdhci-tegra.2: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100 [ 5.480402] mmc1: no vqmmc regulator found [ 5.488933] mmc1: no vmmc regulator found [ 5.497324] mmc1: Invalid maximum block size, assuming 512 bytes [ 5.536878] mmc0: BKOPS_EN bit is not set [ 5.507760] sysedp_create_consumer: unable to create sdhci-tegra.2, no consumer_data for sdhci-tegra.2 found [ 5.541680] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA [ 5.541855] gpio wake56 for gpio=170 [ 5.545782] tegra-se tegra12-se: tegra_se_probe: complete [ 5.548501] usbcore: registered new interface driver usbhid [ 5.548504] usbhid: USB HID core driver [ 5.548983] tegra-hier-ictlr tegra-hier-ictlr: probed [ 5.614056] sdhci-tegra sdhci-tegra.3: Found T2T coeffs data [ 5.624367] sdhci-tegra sdhci-tegra.3: 200MHz tap hole coeffs found [ 5.706314] usbcore: registered new interface driver snd-usb-audio [ 5.717764] MAX98090 driver built on Jun 25 2015 at 15:22:50 [ 5.728905] tegra_offload_platform probe successfull. [ 5.736883] succefully registered offload opstegra30_avp_audio_platform_probe successful. [ 6.012279] rt5639 0-001c: read 0xfd=0x6 [ 6.039854] rt5639 0-001c: ASoC: mux INR Mux has no paths [ 6.050169] rt5639 0-001c: ASoC: mux INL Mux has no paths [ 6.061073] gpio wake49 for gpio=143 [ 6.178925] **********Auto tuning windows************* [ 6.188954] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 6.199283] win[0]: 1(0) - 67(1) [ 6.207322] win[1]: 72(0) - 138(1) [ 6.215526] win[2]: 143(0) - 210(1) [ 6.223779] win[3]: 213(0) - 255(1) [ 6.231978] *************************************** [ 6.241592] ********tuning windows after inserting holes***** [ 6.252099] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 6.262333] win[0]:1(0) - 33(2) [ 6.270228] win[1]:35(2) - 67(1) [ 6.278193] win[2]:72(0) - 104(2) [ 6.286250] win[3]:106(2) - 138(1) [ 6.294350] win[4]:143(0) - 175(2) [ 6.302460] win[5]:177(2) - 210(1) [ 6.310586] win[6]:213(0) - 246(2) [ 6.318727] win[7]:248(2) - 255(1) [ 6.326869] *********************************************** [ 6.337269] **********Tuning values********* [ 6.346372] **estimated values** [ 6.354452] T2T_Vmax 55, T2T_Vmin 77, 1'st_hole_Vmax 49, UI_Vmax 90 [ 6.365624] **Calculated values** [ 6.373814] T2T_Vmax 70, 1'st_hole_Vmax 34, UI_Vmax 71 [ 6.383873] T2T_Vmin 70, 1'st_hole_Vmin 34, UI_Vmin 71 [ 6.393867] *********************************** [ 6.403239] ***********final tuning windows********** [ 6.413109] win[0]: 15 - 26 [ 6.420682] win[1]: 43 - 53 [ 6.428217] win[2]: 86 - 92 [ 6.435647] win[3]: 119 - 124 [ 6.443161] win[4]: 157 - 158 [ 6.450614] win[5]: 195 - 196 [ 6.457966] win[6]: 227 - 224 [ 6.465274] win[7]: 255 - 241 [ 6.472527] ******************************** [ 6.481107] best tap win - (15-26), best tap value 20 prev_best_tap 0 [ 7.039503] **********Auto tuning windows************* [ 7.048952] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 7.058659] win[0]: 1(0) - 67(1) [ 7.066026] win[1]: 72(0) - 138(1) [ 7.073587] rt5639 0-001c: rt5639_headset_detect RT5639_PWR_ANLG1(0x63) = 0xa814 [ 7.085217] win[2]: 143(0) - 208(1) [ 7.085506] rt5639 0-001c: rt5639_headset_detect RT5639_IRQ_CTRL2(0xbe) = 0x0 [ 7.104131] win[3]: 215(0) - 255(1) [ 7.111734] *************************************** [ 7.120727] ********tuning windows after inserting holes***** [ 7.130546] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 7.140138] win[0]:1(0) - 32(2) [ 7.147357] win[1]:34(2) - 67(1) [ 7.148251] rt5639 0-001c: rt5639_headset_detect jack_type = 2 [ 7.148691] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> tegra30-i2s.1 mapping ok [ 7.149114] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> tegra30-spdif mapping ok [ 7.149614] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> tegra30-i2s.3 mapping ok [ 7.150162] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> dit-hifi mapping ok [ 7.150713] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> dit-hifi mapping ok [ 7.151124] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream playback [ 7.151229] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream capture [ 7.151331] tegra-snd-rt5639 tegra-snd-rt5639.0: snd-soc-dummy-dai <-> tegra-offload-pcm mapping ok [ 7.151660] compress asoc: snd-soc-dummy-dai <-> tegra-offload-compr mapping ok [ 7.152028] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream playback [ 7.152122] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream capture [ 7.152216] tegra-snd-rt5639 tegra-snd-rt5639.0: snd-soc-dummy-dai <-> tegra-offload-pcm mapping ok [ 7.152480] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> tegra30-i2s.1 mapping ok [ 7.155803] input: tegra-rt5639 Headphone Jack as /devices/platform/tegra-snd-rt5639.0/sound/card1/input0 [ 7.157490] sysedp_create_consumer: unable to create speaker, no consumer_data for speaker found [ 7.157491] oprofile: using timer interrupt. [ 7.350407] GACT probability NOT on [ 7.350413] win[2]:72(0) - 102(2) [ 7.350417] win[3]:104(2) - 138(1) [ 7.350426] win[4]:143(0) - 172(2) [ 7.350430] win[5]:174(2) - 208(1) [ 7.350433] win[6]:215(0) - 242(2) [ 7.350437] win[7]:244(2) - 255(1) [ 7.350439] *********************************************** [ 7.350443] **********Tuning values********* [ 7.350446] **estimated values** [ 7.350451] T2T_Vmax 55, T2T_Vmin 77, 1'st_hole_Vmax 49, UI_Vmax 90 [ 7.350453] **Calculated values** [ 7.350457] T2T_Vmax 71, 1'st_hole_Vmax 33, UI_Vmax 70 [ 7.350461] T2T_Vmin 71, 1'st_hole_Vmin 33, UI_Vmin 70 [ 7.350464] *********************************** [ 7.350470] ***********final tuning windows********** [ 7.350474] win[0]: 15 - 25 [ 7.350477] win[1]: 42 - 53 [ 7.350481] win[2]: 86 - 90 [ 7.350484] win[3]: 117 - 124 [ 7.350487] win[4]: 157 - 155 [ 7.350490] win[5]: 192 - 194 [ 7.350493] win[6]: 229 - 220 [ 7.350497] win[7]: 255 - 241 [ 7.350498] ******************************** [ 7.350503] best tap win - (42-53), best tap value 47 prev_best_tap 20 [ 7.549238] Mirror/redirect action on [ 7.556595] u32 classifier [ 7.562997] Actions configured [ 7.570135] Netfilter messages via NETLINK v0.30. [ 7.578702] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 7.589058] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 7.599970] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 7.610053] xt_time: kernel timezone is -0000 [ 7.618740] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.628238] arp_tables: (C) 2002 David S. Miller [ 7.636901] TCP: cubic registered [ 7.644360] NET: Registered protocol family 10 [ 7.653611] mip6: Mobile IPv6 [ 7.660544] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 7.670076] sit: IPv6 over IPv4 tunneling driver [ 7.679570] NET: Registered protocol family 17 [ 7.687912] NET: Registered protocol family 15 [ 7.696232] NET: Registered protocol family 35 [ 7.704487] NET: Registered protocol family 37 [ 7.712603] NET: Registered protocol family 41 [ 7.722012] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 7.757211] Registering SWP/SWPB emulation handler [ 7.765745] last reset is due to power on reset [ 7.765745] [ 7.779075] Disabling clocks left on by bootloader: [ 7.787578] audio_2x [ 7.793672] audio [ 7.799469] audio4 [ 7.805313] audio3 [ 7.811160] audio2 [ 7.816996] audio1 [ 7.822796] audio0 [ 7.828603] hdmi_audio [ 7.834602] entropy [ 7.840302] dsi2-fixed [ 7.846239] dsi1-fixed [ 7.852126] nor [ 7.857338] trace [ 7.862684] sdmmc4_ddr [ 7.868288] sdmmc3_ddr [ 7.873810] cclk_lp [ 7.879008] pll_x_out0 [ 7.884461] pll_m_out1 [ 7.890022] tegra_dvfs: vdd_cpu connected to regulator [ 7.898102] tegra_dvfs: vdd_core connected to regulator [ 7.900343] **********Auto tuning windows************* [ 7.900347] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 7.900354] win[0]: 1(0) - 67(1) [ 7.900359] win[1]: 72(0) - 139(1) [ 7.900364] win[2]: 143(0) - 210(1) [ 7.900368] win[3]: 213(0) - 255(1) [ 7.900371] *************************************** [ 7.900404] ********tuning windows after inserting holes***** [ 7.900407] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 7.900412] win[0]:1(0) - 33(2) [ 7.900416] win[1]:35(2) - 67(1) [ 7.900420] win[2]:72(0) - 104(2) [ 7.900424] win[3]:106(2) - 139(1) [ 7.900428] win[4]:143(0) - 175(2) [ 7.900431] win[5]:177(2) - 210(1) [ 7.900434] win[6]:213(0) - 246(2) [ 7.900438] win[7]:248(2) - 255(1) [ 7.900440] *********************************************** [ 7.900445] **********Tuning values********* [ 7.900447] **estimated values** [ 7.900452] T2T_Vmax 55, T2T_Vmin 77, 1'st_hole_Vmax 49, UI_Vmax 90 [ 7.900454] **Calculated values** [ 7.900458] T2T_Vmax 70, 1'st_hole_Vmax 34, UI_Vmax 71 [ 7.900462] T2T_Vmin 70, 1'st_hole_Vmin 34, UI_Vmin 71 [ 7.900464] *********************************** [ 7.900474] ***********final tuning windows********** [ 7.900477] win[0]: 15 - 26 [ 7.900480] win[1]: 43 - 53 [ 7.900483] win[2]: 86 - 92 [ 7.900487] win[3]: 119 - 125 [ 7.900490] win[4]: 157 - 158 [ 7.900492] win[5]: 195 - 196 [ 7.900495] win[6]: 227 - 224 [ 7.900498] win[7]: 255 - 241 [ 7.900500] ******************************** [ 7.900505] best tap win - (15-26), best tap value 20 prev_best_tap 47 [ 8.151984] tegra_dvfs: vdd_gpu connected to regulator [ 8.160908] cpu_cold cooling device is registered [ 8.168472] cpu_hot cooling device is registered [ 8.168573] Tegra CPU DFLL is initialized with use_dfll = 1 [ 8.168665] CPU rate: 696 MHz [ 8.446554] tegra dvfs: tegra sysfs cap interface is initialized [ 8.455443] tegra dvfs: tegra sysfs gpu & emc interface is initialized [ 8.465269] tegra_actmon.emc: Completed initialization (0) [ 8.473727] tegra_actmon.avp: Completed initialization (0) [ 8.482083] tegra_mon.cpu_emc: Completed initialization (0) [ 8.493599] reg-aon-1v2: incomplete constraints, leaving on [ 8.501875] reg-aon-1v8: incomplete constraints, leaving on [ 8.510145] reg-dcdc-1v2: incomplete constraints, leaving on [ 8.518545] reg-5v0-supply: incomplete constraints, leaving on [ 8.527172] usb0-vbus: incomplete constraints, leaving on [ 8.535416] vpp-fuse: incomplete constraints, leaving on [ 8.543624] vdd-2v7-cam: incomplete constraints, leaving on [ 8.552164] avdd-spi: incomplete constraints, leaving on [ 8.560474] vdd-1v1-cam: incomplete constraints, leaving on [ 8.569091] vdd-1v2-cam: incomplete constraints, leaving on [ 8.577697] avdd-cam: incomplete constraints, leaving on [ 8.586092] vdd-cam: incomplete constraints, leaving on [ 8.594439] as3722-sd3: incomplete constraints, leaving on [ 8.603101] vdd-3v3-aon: incomplete constraints, leaving on [ 8.611891] vdd-ac-bat: incomplete constraints, leaving on [ 8.620656] regulator-dummy: incomplete constraints, leaving on [ 8.630580] of_get_named_gpio_flags exited with status 128 [ 8.630672] gpio wake51 for gpio=128 [ 8.637894] input: gpio-keys.4 as /devices/platform/gpio-keys.4/input/input1 [ 8.649253] as3722-rtc as3722-rtc.1: setting system clock to 2000-01-01 00:00:18 UTC (946684818) [ 8.662404] ALSA device list: [ 8.668777] #0: HDA NVIDIA Tegra at 0x70038000 irq 113 [ 8.677521] #1: tegra-rt5639 [ 8.684164] Waiting for root device /dev/mmcblk0p1... [ 8.705772] **********Auto tuning windows************* [ 8.714464] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 8.723559] win[0]: 2(0) - 85(1) [ 8.730395] win[1]: 91(0) - 173(1) [ 8.737337] win[2]: 180(0) - 255(1) [ 8.744336] *************************************** [ 8.752738] ********tuning windows after inserting holes***** [ 8.762016] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 8.771076] win[0]:2(0) - 47(2) [ 8.777796] win[1]:49(2) - 85(1) [ 8.784678] win[2]:91(0) - 135(2) [ 8.791666] win[3]:137(2) - 173(1) [ 8.798747] win[4]:180(0) - 223(2) [ 8.805824] win[5]:225(2) - 255(1) [ 8.812911] *********************************************** [ 8.822200] **********Tuning values********* [ 8.830169] **estimated values** [ 8.837091] T2T_Vmax 55, T2T_Vmin 77, 1'st_hole_Vmax 49, UI_Vmax 90 [ 8.847164] **Calculated values** [ 8.854249] T2T_Vmax 56, 1'st_hole_Vmax 48, UI_Vmax 88 [ 8.863188] T2T_Vmin 56, 1'st_hole_Vmin 48, UI_Vmin 89 [ 8.872129] *********************************** [ 8.880464] ***********final tuning windows********** [ 8.889333] win[0]: 19 - 37 [ 8.895916] win[1]: 60 - 68 [ 8.902503] win[2]: 108 - 120 [ 8.909275] win[3]: 154 - 156 [ 8.916046] win[4]: 197 - 203 [ 8.922827] win[5]: 248 - 238 [ 8.929610] ******************************** [ 8.937747] best tap win - (19-37), best tap value 28 prev_best_tap 20 [ 8.948240] sdhci-tegra sdhci-tegra.3: sdhci_tegra_verify_best_tap: tuning freq 200000000hz, best tap 28 [ 8.964343] mmc0: new HS200 MMC card at address 0001 [ 8.973973] mmcblk mmc0:0001: Card claimed for testing. [ 8.983506] mmcblk0: mmc0:0001 SEM16G 14.6 GiB [ 8.992435] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 9.005489] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 9.103553] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 9.116485] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 9.137428] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 9.149806] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 9.163988] devtmpfs: mounted [ 9.171564] Freeing unused kernel memory: 508K (c0b4c000 - c0bcb000) [ 9.207877] sdhci-tegra sdhci-tegra.2: Found T2T coeffs data [ 9.217837] sdhci-tegra sdhci-tegra.2: 81MHz tap hole coeffs found [ 9.763951] **********Auto tuning windows************* [ 9.773588] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 9.783505] win[0]: 0(0) - 65(1) [ 9.791197] win[1]: 76(0) - 255(1) [ 9.798899] *************************************** [ 9.808096] ********tuning windows after inserting holes***** [ 9.818162] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 9.827962] win[0]:-140(0) - 65(1) [ 9.835700] win[1]:76(0) - 137(2) [ 9.843325] win[2]:139(2) - 255(1) [ 9.851005] *********************************************** [ 9.860875] **********Tuning values********* [ 9.869398] **estimated values** [ 9.876858] T2T_Vmax 57, T2T_Vmin 78, 1'st_hole_Vmax 138, UI_Vmax 216 [ 9.887571] **Calculated values** [ 9.895134] T2T_Vmax 57, 1'st_hole_Vmax 138, UI_Vmax 216 [ 9.904692] T2T_Vmin 90, 1'st_hole_Vmin 86, UI_Vmin 137 [ 9.914095] *********************************** [ 9.922742] ***********final tuning windows********** [ 9.931902] win[0]: -77 - 30 [ 9.938857] win[1]: 93 - 75 [ 9.945696] win[2]: 155 - 150 [ 9.952662] ******************************** [ 9.960947] best tap win - (-77-30), best tap value 0 prev_best_tap 20 [ 9.971512] sdhci-tegra sdhci-tegra.2: sdhci_tegra_verify_best_tap: tuning freq 81600000hz, best tap 0 [ 9.987060] mmc1: new ultra high speed SDR50 SDHC card at address aaaa [ 9.998026] mmcblk mmc1:aaaa: Card claimed for testing. [ 10.007689] mmcblk1: mmc1:aaaa SS08G 7.40 GiB [ 10.026444] mmcblk1: p1 [ 10.298520] init: plymouth-upstart-bridge main process (117) terminated with status 1 [ 10.311627] init: plymouth-upstart-bridge main process ended, respawning [ 10.369731] init: plymouth-upstart-bridge main process (127) terminated with status 1 [ 10.382274] init: plymouth-upstart-bridge main process ended, respawning [ 10.398709] init: ureadahead main process (120) terminated with status 5 [ 10.437759] init: plymouth-upstart-bridge main process (131) terminated with status 1 [ 10.450619] init: plymouth-upstart-bridge main process ended, respawning [ 11.769865] systemd-udevd[278]: starting version 204 [ 12.146942] Tegra cpuquiet clusterswitch enabled [ 12.208600] otg state changed: PERIPHERAL --> SUSPEND [ 12.208884] tegra-udc tegra-udc.0: USB cable/charger disconnected [ 12.209246] otg state changed: SUSPEND --> HOST [ 12.210042] tegra USB phy - inst[0] platform info: [ 12.210062] port_otg: yes [ 12.210075] has_hostpc: yes [ 12.210083] phy_interface: USB_PHY_INTF_UTMI [ 12.210095] op_mode: TEGRA_USB_OPMODE_HOST [ 12.210107] qc2_voltage: 0 [ 12.210114] vbus_gpio: -1 [ 12.210124] hot_plug: disabled [ 12.210134] remote_wakeup: enabled [ 12.251210] vi vi.0: vi_probe: ++ [ 12.261897] vi vi.0: initialized [ 12.263801] vi vi.1: vi_probe: ++ [ 12.274134] vi vi.1: initialized [ 12.627273] Bluetooth: Core ver 2.16 [ 12.628154] NET: Registered protocol family 31 [ 12.628172] Bluetooth: HCI device and connection manager initialized [ 12.628240] Bluetooth: HCI socket layer initialized [ 12.628275] Bluetooth: L2CAP socket layer initialized [ 12.628347] Bluetooth: SCO socket layer initialized [ 12.688053] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.688139] Bluetooth: BNEP socket layer initialized [ 12.771886] Bluetooth: RFCOMM socket layer initialized [ 12.771911] Bluetooth: RFCOMM ver 1.11 [ 13.217701] tegra-ehci tegra-ehci.0: Tegra EHCI Host Controller [ 13.217764] tegra-ehci tegra-ehci.0: new USB bus registered, assigned bus number 3 [ 13.218004] tegra-ehci tegra-ehci.0: irq 52, io mem 0x7d000000 [ 13.223724] tegra-ehci tegra-ehci.0: USB 2.0 started, EHCI 1.10 [ 13.223950] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 13.223972] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.223996] usb usb3: Product: Tegra EHCI Host Controller [ 13.224013] usb usb3: Manufacturer: Linux 3.10.40-gdacac96 ehci_hcd [ 13.224033] usb usb3: SerialNumber: tegra-ehci.0 [ 13.225165] hub 3-0:1.0: USB hub found [ 13.225205] hub 3-0:1.0: 1 port detected [ 13.526718] usb 3-1: new full-speed USB device number 2 using tegra-ehci [ 13.547031] usb 3-1: New USB device found, idVendor=413c, idProduct=1005 [ 13.547048] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 13.547062] usb 3-1: Product: Dell Multimedia Pro Keyboard Hub [ 13.547077] usb 3-1: Manufacturer: Dell [ 13.550287] hub 3-1:1.0: USB hub found [ 13.551047] hub 3-1:1.0: 3 ports detected [ 13.705569] device-mapper: uevent: version 1.0.3 [ 13.705980] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 13.826037] usb 3-1.1: new low-speed USB device number 3 using tegra-ehci [ 13.848028] usb 3-1.1: New USB device found, idVendor=413c, idProduct=2011 [ 13.848038] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 13.848045] usb 3-1.1: Product: Dell Multimedia Pro Keyboard [ 13.848052] usb 3-1.1: Manufacturer: Dell [ 13.860619] input: Dell Dell Multimedia Pro Keyboard as /devices/platform/tegra-ehci.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input2 [ 13.861143] hid-generic 0003:413C:2011.0001: input: USB HID v1.10 Keyboard [Dell Dell Multimedia Pro Keyboard] on usb-tegra-ehci.0-1.1/input0 [ 13.872252] input: Dell Dell Multimedia Pro Keyboard as /devices/platform/tegra-ehci.0/usb3/3-1/3-1.1/3-1.1:1.1/input/input3 [ 13.872397] hid-generic 0003:413C:2011.0002: input: USB HID v1.10 Device [Dell Dell Multimedia Pro Keyboard] on usb-tegra-ehci.0-1.1/input1 [ 13.938024] usb 3-1.3: new low-speed USB device number 4 using tegra-ehci [ 13.959027] usb 3-1.3: New USB device found, idVendor=17ef, idProduct=6019 [ 13.959034] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 13.959039] usb 3-1.3: Product: Lenovo USB Optical Mouse [ 13.959044] usb 3-1.3: Manufacturer: PixArt [ 13.963373] input: PixArt Lenovo USB Optical Mouse as /devices/platform/tegra-ehci.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input4 [ 13.963534] hid-generic 0003:17EF:6019.0003: input: USB HID v1.11 Mouse [PixArt Lenovo USB Optical Mouse] on usb-tegra-ehci.0-1.3/input0 [ 14.597745] r8169 0000:01:00.0 eth0: link down [ 14.597791] r8169 0000:01:00.0 eth0: link down [ 14.597969] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.468745] init: plymouth-upstart-bridge main process ended, respawning [ 16.111437] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 16.111544] tegra_dc_hdmi_enable: HDMI clock already configured to target frequency, skipping clk setup. [ 16.214486] init: smbd main process (898) killed by HUP signal [ 16.214521] init: smbd main process ended, respawning [ 16.306930] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 16.323936] r8169 0000:01:00.0 eth0: link up [ 16.323961] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.684011] init: samba-ad-dc main process (934) terminated with status 1 [ 17.037773] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 33.912974] init: plymouth-stop pre-start process (1525) terminated with status 1 [ 136.336664] init: plymouth-stop pre-start process (1818) terminated with status 1 [ 211.144986] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 223.676993] tegradc tegradc.1: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000 [ 223.677099] tegra_dc_hdmi_enable: HDMI clock already configured to target frequency, skipping clk setup. [ 235.923990] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.