ÿâ [0000.063] I> MB1 (version: 0.32.0.0-t234-54845784-57325615) [0000.069] I> t234-A01-0-Silicon (0x12347) Prod [0000.073] I> Boot-mode : Coldboot [0000.076] I> Emulation: [0000.079] I> Entry timestamp: 0x00000000 [0000.082] I> last_boot_error: 0x0 [0000.085] I> BR-BCT: preprod_dev_sign: 0 [0000.089] I> rst_source: 0x0, rst_level: 0x0 [0000.093] I> Task: Bootchain select WAR set (0x5000ba65) [0000.098] I> Task: Enable SLCG (0x5000bab1) [0000.103] I> Task: CRC check (0x5001ea19) [0000.106] I> Skip FUSE records CRC check as records_integrity fuse is not burned [0000.114] I> Task: Initialize MB2 params (0x5000cb51) [0000.119] I> MB2-params @ 0x40060000 [0000.122] I> Task: Crypto init (0x5001d981) [0000.126] I> Task: Secure debug controls (0x5000c0a9) [0000.131] I> Task: strap war set (0x5000ba2d) [0000.136] I> Task: Initialize SOC Therm (0x5001bd35) [0000.140] I> Task: Program NV master stream id (0x5000c05d) [0000.146] I> Task: Verify boot mode (0xd4820f1) [0000.152] I> Task: Alias fuses (0x5001095d) [0000.156] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.163] I> Task: Print SKU type (0x5000f5f1) [0000.168] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0000.173] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.177] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0000.181] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.186] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0000.190] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0000.194] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0000.199] I> FUSE_OPT_FSI_DISABLE = 0x00000000 [0000.203] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.207] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.211] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.216] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.220] I> FUSE_SKU_INFO_0 = 0xd0 [0000.223] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.227] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.231] I> SKU: Prod [0000.233] I> Task: Boost clocks (0x500148a1) [0000.237] I> Initializing PLLC2 for AXI_CBB. [0000.241] I> AXI_CBB : src = 35, divisor = 0 [0000.245] I> Task: Voltage monitor (0x50014b49) [0000.250] I> VMON: Vmon re-calibration and fine tuning done [0000.255] I> Task: UPHY init (0x5000d065) [0000.261] I> HSIO UPHY init done [0000.264] E> Skipping GBE UPHY config [0000.268] I> Task: Boot device init (0x50000be9) [0000.272] I> Boot_device: QSPI_FLASH instance: 0 [0000.277] I> Qspi clock source : pllc_out0 [0000.281] I> QSPI Flash: Macronix 64MB [0000.285] I> QSPI-0l initialized successfully [0000.289] I> Task: TSC init (0x50020a4d) [0000.293] I> Task: Load membct (0x50011fe9) [0000.297] I> RAM_CODE 0x4000431 [0000.300] I> Loading MEMBCT [0000.302] I> Slot: 0 [0000.304] I> Binary[0] block-0 (partition size: 0x40000) [0000.310] I> get_binary_info: Binary name: MEM-BCT-0 [0000.315] I> Size of crypto header is 8192 [0000.318] I> BCH load address is : 0x40050000 [0000.323] I> Size of crypto header is 8192 [0000.327] I> BCH of MEM-BCT-0 read from storage [0000.331] I> BCH address is : 0x40050000 [0000.335] I> MEM-BCT-0 header integrity check is success [0000.340] I> Binary magic in BCH component 0 is MEM0 [0000.345] I> component binary type is 0 [0000.349] I> MEM-BCT-0 binary is read from storage [0000.354] I> MEM-BCT-0 binary integrity check is success [0000.359] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.366] I> RAM_CODE 0x4000431 [0000.371] I> RAM_CODE 0x4000431 [0000.375] I> Task: Load Page retirement list (0x500115b1) [0000.381] I> Task: SDRAM params override (0x50011fc5) [0000.385] I> Task: Save mem-bct info (0x50014fa1) [0000.390] I> Task: Carveout allocate (0x50015005) [0000.395] I> RCM blob carveout will not be allocated [0000.399] I> ECC region[0]: Start:0x0, End:0x0 [0000.404] I> ECC region[1]: Start:0x0, End:0x0 [0000.408] I> ECC region[2]: Start:0x0, End:0x0 [0000.412] I> ECC region[3]: Start:0x0, End:0x0 [0000.416] I> ECC region[4]: Start:0x0, End:0x0 [0000.421] I> Non-ECC region[0]: Start:0x80000000, End:0x1080000000 [0000.427] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.431] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.436] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.441] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.450] I> allocated(CO:44) base:0x1049800000 size:0x36800000 align: 0x100000 [0000.458] I> allocated(CO:31) base:0x1040000000 size:0x8000000 align: 0x8000000 [0000.465] I> allocated(CO:43) base:0x103c000000 size:0x4000000 align: 0x200000 [0000.472] I> allocated(CO:20) base:0x103a000000 size:0x2000000 align: 0x2000000 [0000.479] I> allocated(CO:24) base:0x1038000000 size:0x2000000 align: 0x2000000 [0000.486] I> allocated(CO:28) base:0x1036000000 size:0x2000000 align: 0x2000000 [0000.493] I> allocated(CO:29) base:0x1034000000 size:0x2000000 align: 0x2000000 [0000.501] I> allocated(CO:22) base:0x1048000000 size:0x1000000 align: 0x1000000 [0000.508] I> allocated(CO:41) base:0x1033000000 size:0x1000000 align: 0x100000 [0000.515] I> allocated(CO:35) base:0x1032200000 size:0xe00000 align: 0x10000 [0000.522] I> allocated(CO:02) base:0x1049000000 size:0x800000 align: 0x800000 [0000.529] I> allocated(CO:03) base:0x1031800000 size:0x800000 align: 0x800000 [0000.536] I> allocated(CO:06) base:0x1031000000 size:0x800000 align: 0x800000 [0000.543] I> allocated(CO:10) base:0x1030800000 size:0x800000 align: 0x800000 [0000.550] I> allocated(CO:56) base:0x1030000000 size:0x800000 align: 0x200000 [0000.557] I> allocated(CO:07) base:0x102fc00000 size:0x400000 align: 0x400000 [0000.564] I> allocated(CO:33) base:0x102f800000 size:0x400000 align: 0x200000 [0000.571] I> allocated(CO:23) base:0x1032000000 size:0x200000 align: 0x200000 [0000.578] I> allocated(CO:01) base:0x102f700000 size:0x100000 align: 0x100000 [0000.585] I> allocated(CO:04) base:0x102f600000 size:0x100000 align: 0x100000 [0000.592] I> allocated(CO:05) base:0x102f500000 size:0x100000 align: 0x100000 [0000.599] I> allocated(CO:08) base:0x102f400000 size:0x100000 align: 0x100000 [0000.606] I> allocated(CO:09) base:0x102f300000 size:0x100000 align: 0x100000 [0000.613] I> allocated(CO:15) base:0x102f200000 size:0x100000 align: 0x100000 [0000.620] I> allocated(CO:17) base:0x102f100000 size:0x100000 align: 0x100000 [0000.627] I> allocated(CO:27) base:0x102f000000 size:0x100000 align: 0x100000 [0000.634] I> allocated(CO:42) base:0x102ef00000 size:0x100000 align: 0x100000 [0000.641] I> allocated(CO:54) base:0x102ee80000 size:0x80000 align: 0x80000 [0000.648] I> allocated(CO:34) base:0x102ee70000 size:0x10000 align: 0x10000 [0000.655] I> allocated(CO:47) base:0x102ea00000 size:0x400000 align: 0x200000 [0000.662] I> allocated(CO:72) base:0x102e800000 size:0x200000 align: 0x10000 [0000.669] I> allocated(CO:48) base:0x102ee50000 size:0x20000 align: 0x10000 [0000.675] I> allocated(CO:69) base:0x102ee30000 size:0x20000 align: 0x10000 [0000.682] I> allocated(CO:49) base:0x102ee20000 size:0x10000 align: 0x10000 [0000.689] I> allocated(CO:50) base:0x102ee10000 size:0x10000 align: 0x10000 [0000.696] I> allocated(CO:52) base:0x102ee00000 size:0x10000 align: 0x10000 [0000.703] I> NSDRAM base: 0x80000000, end: 0x102ee70000 [0000.708] I> Task: Thermal check (0x50021d55) [0000.712] I> max_chip_limit = 105 [0000.715] I> min_chip_limit = -28 [0000.718] I> max temp read = 30 [0000.721] I> min temp read = 26 [0000.724] I> Task: Update FSI SCR with thermal fuse data (0x50021e61) [0000.731] I> Task: Enable WDT 5th expiry (0x50021a41) [0000.735] I> Task: I2C register (0x50000b85) [0000.740] I> Task: Reset FSI (0x500148b1) [0000.743] I> Task: Pinmux init (0x5001397d) [0000.748] I> Task: Prod config init (0x50013ddd) [0000.752] I> Task: Pad voltage init (0x50013a2d) [0000.757] I> Task: Prod init (0x50013e21) [0000.761] I> Task: Common rail init (0x50014575) [0000.765] I> DONE: Thermal config [0000.769] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.777] I> DONE: SOC rail config [0000.781] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.788] I> DONE: MEMIO rail config [0000.791] I> DONE: GPU rail info [0000.794] I> DONE: CV rail info [0000.797] I> Task: Mem clock src (0x50011de9) [0000.801] I> Task: Misc. board config (0x5001461d) [0000.806] W> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.812] I> Task: SDRAM init (0x50011ded) [0000.816] I> SDRAM-params @ 0xd485000 [0000.819] I> MemoryType: 4 MemBctRevision: 8 [0000.826] I> MSS code-drop: NvBootSdramInit [0000.830] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 8 [0000.837] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 8 [0000.845] I> MSS CAR: Init PLLM [0000.848] I> MSS CAR: Init PLLHUB [0000.853] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.864] I> mb1_sdram_init Done ! [0000.868] I> SDRAM Size in Total 0x1000000000 [0000.872] I> Task: Dram Ecc scrub (0x500116f5) [0000.876] I> Task: DRAM alias check (0x50011fbd) [0000.908] I> Task: Program NSDRAM carveout (0x50015961) [0000.915] I> NSDRAM carveout encryption is enabled [0000.920] I> Program NSDRAM carveout [0000.924] I> Task: Register checker (0x50011fc1) [0000.932] I> Task: Enable clock-mon (0x50020a35) [0000.949] I> FMON: Fmon re-programming done [0000.953] I> Task: Mapper init (0x5001ef4d) [0000.959] I> Task: SC7 Context Init (0x50020d3d) [0000.965] I> Task: CCPLEX IST init (0x5000c925) [0000.970] I> Task: CPU WP0 (0x5000bb15) [0000.975] I> Loading MCE [0000.978] I> Slot: 0 [0000.980] I> Binary[8] block-0 (partition size: 0x80000) [0000.986] I> get_binary_info: Binary name: MCE [0000.991] I> Size of crypto header is 8192 [0000.996] I> BCH load address is : 0x4003e000 [0001.001] I> Size of crypto header is 8192 [0001.006] I> BCH of MCE read from storage [0001.010] I> BCH address is : 0x4003e000 [0001.015] I> MCE header integrity check is success [0001.020] I> Binary magic in BCH component 0 is MTSM [0001.026] I> component binary type is 8 [0001.030] I> Size of crypto header is 8192 [0001.036] I> MCE binary is read from storage [0001.042] I> MCE binary integrity check is success [0001.047] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0001.054] I> Size of crypto header is 8192 [0001.069] I> Size of crypto header is 8192 [0001.073] I> Sending WP0 mailbox command to PSC [0001.084] I> Task: XUSB Powergate (0x50000b91) [0001.089] I> Skipping powergate XUSB. [0001.093] I> Task: MB1 fixed firewalls (0x5002006d) [0001.104] W> Firewall readback mismatch [0001.109] W> Firewall readback mismatch [0001.117] W> Firewall readback mismatch [0001.127] I> Task: Load bpmp-fw (0x500203c9) [0001.132] I> Slot: 0 [0001.135] I> Binary[15] block-0 (partition size: 0x180000) [0001.141] I> get_binary_info: Binary name: BPMP_FW [0001.146] I> Size of crypto header is 8192 [0001.151] I> BCH load address is : 0x807fe000 [0001.156] I> Size of crypto header is 8192 [0001.161] I> BCH of BPMP_FW read from storage [0001.165] I> BCH address is : 0x807fe000 [0001.171] I> BPMP_FW header integrity check is success [0001.176] I> Binary magic in BCH component 0 is BPMF [0001.181] I> component binary type is 15 [0001.186] I> Size of crypto header is 8192 [0001.201] I> BPMP_FW binary is read from storage [0001.208] I> BPMP_FW binary integrity check is success [0001.214] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfddc0) [0001.222] I> Slot: 0 [0001.224] I> Binary[16] block-10000 (partition size: 0x400000) [0001.231] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.236] I> Size of crypto header is 8192 [0001.241] I> BCH load address is : 0x807fc000 [0001.246] I> Size of crypto header is 8192 [0001.251] I> BCH of BPMP_FW_DTB read from storage [0001.256] I> BCH address is : 0x807fc000 [0001.261] I> BPMP_FW_DTB header integrity check is success [0001.267] I> Binary magic in BCH component 0 is BPMD [0001.272] I> component binary type is 16 [0001.277] I> Size of crypto header is 8192 [0001.283] I> BPMP_FW_DTB binary is read from storage [0001.289] I> BPMP_FW_DTB binary integrity check is success [0001.295] I> Binary BPMP_FW_DTB loaded successfully at 0x807db9f0 (0x20440) [0001.303] I> Task: Load psc-fw (0x50020551) [0001.309] I> Slot: 0 [0001.311] I> Binary[17] block-0 (partition size: 0xc0000) [0001.317] I> get_binary_info: Binary name: PSC_FW [0001.322] I> Size of crypto header is 8192 [0001.327] I> BCH load address is : 0x80ffe000 [0001.332] I> Size of crypto header is 8192 [0001.337] I> BCH of PSC_FW read from storage [0001.342] I> BCH address is : 0x80ffe000 [0001.347] I> PSC_FW header integrity check is success [0001.352] I> Binary magic in BCH component 0 is PFWP [0001.358] I> component binary type is 17 [0001.362] I> Size of crypto header is 8192 [0001.370] I> PSC_FW binary is read from storage [0001.376] I> PSC_FW binary integrity check is success [0001.382] I> Binary PSC_FW loaded successfully at 0x80000000 (0x59980) [0001.390] I> Task: Load nvdec-fw (0x500205c5) [0001.395] I> Slot: 0 [0001.398] I> Binary[7] block-0 (partition size: 0x100000) [0001.404] I> get_binary_info: Binary name: NVDEC [0001.409] I> Size of crypto header is 8192 [0001.413] I> BCH load address is : 0x800fe000 [0001.419] I> Size of crypto header is 8192 [0001.424] I> BCH of NVDEC read from storage [0001.428] I> BCH address is : 0x800fe000 [0001.433] I> NVDEC header integrity check is success [0001.439] I> Binary magic in BCH component 0 is NDEC [0001.444] I> component binary type is 7 [0001.448] I> Size of crypto header is 8192 [0001.456] I> NVDEC binary is read from storage [0001.461] I> NVDEC binary integrity check is success [0001.467] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0001.474] I> Size of crypto header is 8192 [0001.493] I> Task: Load tsec-fw (0x5002097d) [0001.498] I> TSEC-FW load support not enabled [0001.502] I> Task: GPIO interrupt map (0x500147b5) [0001.508] I> Task: SC7 context save (0x50020d79) [0001.514] I> Slot: 0 [0001.517] I> Binary[27] block-0 (partition size: 0x100000) [0001.523] I> get_binary_info: Binary name: BR_BCT [0001.528] I> Size of crypto header is 8192 [0001.532] I> Size of crypto header is 8192 [0001.537] I> BR_BCT binary is read from storage [0001.542] I> BR_BCT binary integrity check is success [0001.548] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.556] I> Slot: 0 [0001.558] I> Binary[13] block-0 (partition size: 0x30000) [0001.564] I> get_binary_info: Binary name: SC7-FW [0001.569] I> Size of crypto header is 8192 [0001.574] I> Size of crypto header is 8192 [0001.578] I> BCH load address is : 0xa0002000 [0001.583] I> Size of crypto header is 8192 [0001.588] I> BCH of SC7-FW read from storage [0001.593] I> BCH address is : 0xa0002000 [0001.598] I> SC7-FW header integrity check is success [0001.603] I> Binary magic in BCH component 0 is WB0B [0001.609] I> component binary type is 13 [0001.613] I> Size of crypto header is 8192 [0001.619] I> SC7-FW binary is read from storage [0001.625] I> SC7-FW binary integrity check is success [0001.630] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x26db0) [0001.638] I> Slot: 0 [0001.641] I> Binary[22] block-0 (partition size: 0x30000) [0001.647] I> get_binary_info: Binary name: PSC_RF [0001.652] I> Size of crypto header is 8192 [0001.656] I> Size of crypto header is 8192 [0001.661] I> BCH load address is : 0xa002adb0 [0001.666] I> Size of crypto header is 8192 [0001.671] I> BCH of PSC_RF read from storage [0001.675] I> BCH address is : 0xa002adb0 [0001.681] I> PSC_RF header integrity check is success [0001.686] I> Binary magic in BCH component 0 is PSCR [0001.691] I> component binary type is 22 [0001.696] I> Size of crypto header is 8192 [0001.702] I> PSC_RF binary is read from storage [0001.707] I> PSC_RF binary integrity check is success [0001.712] I> Binary PSC_RF loaded successfully at 0xa002cdb0 (0x1b140) [0001.735] I> Task: Save WP0 payload to SC7 ctx (0x50021725) [0001.742] I> Task: Load MB2rf binary to SC7 ctx (0x500216b9) [0001.749] I> Slot: 0 [0001.751] I> Binary[14] block-0 (partition size: 0x20000) [0001.757] I> get_binary_info: Binary name: MB2_RF [0001.762] I> Size of crypto header is 8192 [0001.767] I> Size of crypto header is 8192 [0001.771] I> BCH load address is : 0xa00d6a48 [0001.777] I> Size of crypto header is 8192 [0001.781] I> BCH of MB2_RF read from storage [0001.786] I> BCH address is : 0xa00d6a48 [0001.791] I> MB2_RF header integrity check is success [0001.797] I> Binary magic in BCH component 0 is MB2R [0001.802] I> component binary type is 14 [0001.806] I> Size of crypto header is 8192 [0001.812] I> MB2_RF binary is read from storage [0001.818] I> MB2_RF binary integrity check is success [0001.823] I> Binary MB2_RF loaded successfully at 0xa00d8a48 (0x1bfa0) [0001.831] I> Task: Save Fuse-Bypass data to SC7 ctx (0x50021621) [0001.839] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.846] I> SC7 context fuse-bypass data is empty [0001.851] I> Task: Save PMIC data to SC7 ctx (0x5002144d) [0001.858] I> Task: Save I2C bus freq data to SC7 ctx (0x500213d9) [0001.865] I> Task: Save SOCTherm data to SC7 ctx (0x50021365) [0001.872] I> Task: Save FMON data to SC7 ctx (0x500212f1) [0001.878] I> Task: Save VMON data to SC7 ctx (0x50021279) [0001.885] I> Task: Save TZDRAM data to SC7 ctx (0x5002178d) [0001.891] I> Task: Save GPIO int data to SC7 ctx (0x50021561) [0001.898] I> Task: Save clock data to SC7 ctx (0x50021205) [0001.905] I> Task: Save debug data to SC7 ctx (0x50021191) [0001.915] I> SC7 context save done [0001.919] I> Task: Load MB2/Applet/FSKP (0x5000ca55) [0001.925] I> Loading MB2 [0001.928] I> Slot: 0 [0001.931] I> Binary[6] block-0 (partition size: 0x80000) [0001.937] I> get_binary_info: Binary name: MB2 [0001.941] I> Size of crypto header is 8192 [0001.946] I> BCH load address is : 0x8007e000 [0001.951] I> Size of crypto header is 8192 [0001.956] I> BCH of MB2 read from storage [0001.960] I> BCH address is : 0x8007e000 [0001.966] I> MB2 header integrity check is success [0001.971] I> Binary magic in BCH component 0 is MB2B [0001.976] I> component binary type is 6 [0001.980] I> Size of crypto header is 8192 [0001.989] I> MB2 binary is read from storage [0001.995] I> MB2 binary integrity check is success [0002.000] I> Binary MB2 loaded successfully at 0x80000000 (0x68ee0) [0002.008] I> Task: Map CCPLEX SHARED carveout (0x5000cbf9) [0002.015] I> Task: Prepare MB2 params (0x5000cca9) [0002.022] I> BR-BCT Boot Chain Fields [0002.026] I> u32_non_gpio_select_boot_chain : 0 [0002.031] I> u32_num_boot_chains : 2 [0002.036] I> bf_bl_gpio_select_boot_chain_1b : 0 [0002.041] I> Task: Dram ecc test (0x50011791) [0002.047] I> Task: Misc NV security settings (0x5000c529) [0002.053] I> NVDEC sticky bits programming done [0002.058] I> Successfully powergated NVDEC [0002.062] I> Task: Disable/Reload WDT (0x50021a99) [0002.068] I> Task: Program misc carveouts (0x50015381) [0002.075] I> Program IPC carveouts [0002.081] I> SLCG Global override status := 0x0 [0002.086] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-9c429857) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x00206f89 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x1030000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e80) I> Task: Enable hot-plug capability (0x50026c6c) I> Task: PSC mailbox init (0x50016a7c) I> Task: Crypto init (0x500065a8) I> Task: Enable GP-SE clock (0x50001fe4) I> Task: DICE Identity init (0x50019e50) I> DICE is not enabled. I> Task: OEM SC7 context save init (0x50019550) I> Task: I2C register (0x50001e44) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e2c) I> Task: Program CBB PCIE AMAP regions (0x50019b64) I> Task: Boot device init (0x50001d74) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001d70) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 14 partitions in SDMMC_USER (instance 3) I> Task: Load and authenticate registered FWs (0x5001ce48) I> Task: Load AUXP FWs (0x5002680c) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x102f400000 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x102f100000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x103a000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9299888 bytes I> dce: plain binary integrity check is success I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x103a000000 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x102fc00000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x102f500000 I> Task: Carveout setup (0x5001f55c) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x50016950) I> Task: Enable FSI VMON (0x500164d8) I> FSI VMON: FSI Vmon re-calibration and fine tuning done I> Task: Validate FSI Therm readings (0x50016530) I> FSITHERM max temp = 30 I> FSITHERM min temp = 28 I> Task: Restore XUSB sec (0x50001d44) I> Task: Enable FSI SE clock (0x50016ed8) I> Enable FSI-SE clock and 10ms delay... I> Task: Initialize SBSA UART CAR (0x50001f48) I> Task: Ratchet update (0x50027d08) W> OPTIN fuse not set, skip ratchet update I> Task: Initialize CPUBL Params (0x50017e0c) I> CPUBL-params @ 0x1036000000 I> Task: Prepare eeprom data (0x50017bd8) I> Task: FSI padctl context save (0x500196e0) I> Task: Unpowergate APE (0x50017640) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: OEM firewalls (0x5002397c) I> OEM firewalls configured I> Task: Powergate APE (0x500177b4) I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings (0x50023dd0) I> Task: Unhalt AUXPs (0x50026a74) I> Unhalting SPE.. I> Enabling combined UART ÿýÿàspe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 243b265b351d6bb9cc7b2e3acc5d90f8 spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler ÿá I> Task: Trigger mailbox for PSC-BL1 exit (0x50016afc) I> Sending opcode 0x4d420802 to psc ÿçINFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x1048002000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: 8a33b23-73b589c-8a15f76-rel-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 ÿáI> Received ACK from psc I> TasÿçINFO: MONITOR: user task addr:0x1048022000, blob offset:0x00020000 INFO: MONITOR: populated user images:13 ÿâ bpmp: socket 0 bpmp: base binary md5 is 1377b684fe55be78e1d7fc3e0f143b55 bpmp: combined binary md5 is 463f4d5b75234b74bb7f05b524d2a015 bpmp: firmware tag ÿçINFO: mret to Supervisor! INFO: psc supervisor init. ÿâis 463f4d5b75234b74bb7f-1377b684ÿçINFO: psc_irq_init... INFO: enter idle task. ÿâfe5 initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized tj_init initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ÿák: Start secure NOR provision (0x5001997c) I> Task: Load FSI keyblob (0x50016f20) I> Skipping FSI key blob copy I> Task: Unhalt AUXPsÿâinitialized avfs_clk_platform initialized powergate ÿá (0x50026a7c) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalt sÿâinitialized dvs ÿáuccÿâinitialized clk_mach_config initialized pm initialized suspend initialized strap initialized mce_dbell ÿå[ 2.518805] Camera-FW on t234-rce-safe started TCU early console enabled. ÿáessful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x50017f04) I> Task: Load TOS (0x50018608) I> Task: Load and authenticate registered FWs (0x5001ce48) I> Partitionÿè ÿá name: A_cpu-bootloader I> Size of partition: 3670016 I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloader ÿâinitialized emc initialized emc_mrq initialized clk_cal initialized uphy_dt initialized uphy_mrq HSIO UPHY reset has been de-asserted 0x0 initialized uphy ÿáI> Partition name: A_secure-os I> Size of partition: 4194304 ÿâinitialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq ÿáI> Binary@ device:3/0 blÿâmissing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ÿáock-32000 (partition size: 0x400000), name: A_secure-os I> MB2-params @ 0x40060000 I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0x102ea00000 ÿâinitialized clk_cal_late initialized noc_late initialized cvc ÿáI> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x103fdfe00ÿâinitialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable pwm3 enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable pllc4_muxed enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp enable sdmmc_legacy_tm initialized clk_mach_post initializÿå[ 2.693554] Camera-FW on t234-rce-safe ready SHA1=97e50cbf (crt 12.950 ms,ÿâed pg_post initialized regulator_post initialized profile initialized fuse_late initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete ÿå total boot 188.759 ms) ÿá0 ÿèDCE: FW Boot Done ÿáI> Relocating OP-TEE dtb from: 0x103feff770 to 0x102ee30000, size: 0x1976 I> [0] START: 0x80000000, SIZE: 0xfaee70000 I> [1] START: 0x1036000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x1030000400 I> EKB detected (length: 0x410) @ VA:0x1030000400 I> Task: Prepare TOS params (0x50018580) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x102ee30000 I> Task: OEM SC7 context save (0x500197dc) I> OEM sc7 context saved I> Task: Disable MSS perf stats (0x50026b08) I> Task: Program display sticky bits (0x50026a84) I> Task: Storage device deinit (0x50001eec) I> Task: SMMU external bypass disable (0x50016a60) I> Task: SMMU init (0x5001697c) I> Task: Program GICv3 registers (0x50026ba8) I> Task: Audit firewall settings (0x50023bd0) I> Task: Bootchain failure check (0x50002434) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished ÿäNOTICE: BL31: v2.6(release):07eea4970 NOTICE: BL31: Built : 07:55:15, Mar 19 2023 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Sun Mar 19 15:02:44 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: WARNING: Test OEM keys are being used! I/TC: This is only for TZ-SE testing and should NOT be used for a shipping product! I/TC: Primary CPU switching to normal world boot ÿá Jetson UEFI firmware (version 3.1-32827747 built on 2023-03-19T14:56:32+00:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot I/TC: Secondary CPU 8 initializing I/TC: Secondary CPU 8 switching to normal world boot I/TC: Secondary CPU 9 initializing I/TC: Secondary CPU 9 switching to normal world boot I/TC: Secondary CPU 10 initializing I/TC: Secondary CPU 10 switching to normal world boot I/TC: Secondary CPU 11 initializing I/TC: Secondary CPU 11 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-6289-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Sun Mar 19 07:55:28 PDT 2023 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: Systel Kite-Strike II Jetson Orin CB 810882 [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x1008623718 SMBIOS=0xffff0000 SMBIOS 3.0=0x1006fc0000 MEMATTR=0x1007ee9018 ESRT=0x1006f5b098 RNG=0x102adcf398 MEMRESERVE=0x1007eeaf18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x0000001006f5b098 to 0x0000001006f5b0d0. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000101ac00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000001037ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000001003ffffff] [ 0.000000] node 0: [mem 0x0000001004000000-0x00000010061bffff] [ 0.000000] node 0: [mem 0x00000010061c0000-0x000000100625ffff] [ 0.000000] node 0: [mem 0x0000001006260000-0x000000100627ffff] [ 0.000000] node 0: [mem 0x0000001006280000-0x0000001006bfbfff] [ 0.000000] node 0: [mem 0x0000001006bfc000-0x0000001006dc4fff] [ 0.000000] node 0: [mem 0x0000001006dc5000-0x0000001006faffff] [ 0.000000] node 0: [mem 0x0000001006fb0000-0x0000001006fcffff] [ 0.000000] node 0: [mem 0x0000001006fd0000-0x000000100723ffff] [ 0.000000] node 0: [mem 0x0000001007240000-0x000000100728ffff] [ 0.000000] node 0: [mem 0x0000001007290000-0x000000100795ffff] [ 0.000000] node 0: [mem 0x0000001007960000-0x00000010079affff] [ 0.000000] node 0: [mem 0x00000010079b0000-0x0000001007a6ffff] [ 0.000000] node 0: [mem 0x0000001007a70000-0x0000001007bfffff] [ 0.000000] node 0: [mem 0x0000001007c00000-0x0000001007ceffff] [ 0.000000] node 0: [mem 0x0000001007cf0000-0x0000001007ecffff] [ 0.000000] node 0: [mem 0x0000001007ed0000-0x0000001007f1ffff] [ 0.000000] node 0: [mem 0x0000001007f20000-0x0000001007f3ffff] [ 0.000000] node 0: [mem 0x0000001007f40000-0x0000001007f5ffff] [ 0.000000] node 0: [mem 0x0000001007f60000-0x000000100809ffff] [ 0.000000] node 0: [mem 0x00000010080a0000-0x00000010080dffff] [ 0.000000] node 0: [mem 0x00000010080e0000-0x000000100812ffff] [ 0.000000] node 0: [mem 0x0000001008130000-0x000000100815ffff] [ 0.000000] node 0: [mem 0x0000001008160000-0x000000100816ffff] [ 0.000000] node 0: [mem 0x0000001008170000-0x000000100873ffff] [ 0.000000] node 0: [mem 0x0000001008740000-0x00000010087dffff] [ 0.000000] node 0: [mem 0x00000010087e0000-0x00000010088dffff] [ 0.000000] node 0: [mem 0x00000010088e0000-0x000000100897ffff] [ 0.000000] node 0: [mem 0x0000001008980000-0x0000001008a7ffff] [ 0.000000] node 0: [mem 0x0000001008a80000-0x0000001008b1ffff] [ 0.000000] node 0: [mem 0x0000001008b20000-0x00000010093effff] [ 0.000000] node 0: [mem 0x00000010093f0000-0x00000010095cffff] [ 0.000000] node 0: [mem 0x00000010095d0000-0x000000102ad7ffff] [ 0.000000] node 0: [mem 0x000000102ad80000-0x000000102adcffff] [ 0.000000] node 0: [mem 0x000000102add0000-0x000000102e7fffff] [ 0.000000] node 0: [mem 0x000000102ea00000-0x000000102edfffff] [ 0.000000] node 0: [mem 0x0000001036000000-0x0000001037ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000001037ffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16195072 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 console=tty0 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 64028240K/65810432K available (18496K kernel code, 3168K rwdata, 7172K rodata, 3968K init, 1418K bss, 1520048K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000372] Console: colour dummy device 80x25 [ 0.000572] printk: console [tty0] enabled [ 0.000615] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000623] pid_max: default: 32768 minimum: 301 [ 0.000688] LSM: Security Framework initializing [ 0.000714] Yama: becoming mindful. [ 0.000732] SELinux: Initializing. [ 0.000860] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000948] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.002674] rcu: Hierarchical SRCU implementation. [ 0.002780] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.003027] DTS File Name: /home/systel/Projects/Kite-Strike-II-BSP/merged_kernel/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/concord/kernel-dts/tegra234-p3701-0005-systel-810882.dts [ 0.003036] DTB Build time: Mar 29 2023 14:17:44 [ 0.003702] Tegra Revision: A01 SKU: 0xd0 CPU Process: 0 SoC Process: 0 [ 0.003929] Remapping and enabling EFI services. [ 0.005189] smp: Bringing up secondary CPUs ... [ 0.033918] Detected PIPT I-cache on CPU1 [ 0.033957] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.033999] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.062666] Detected PIPT I-cache on CPU2 [ 0.062678] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.062694] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.091309] Detected PIPT I-cache on CPU3 [ 0.091319] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.091333] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.122006] Detected PIPT I-cache on CPU4 [ 0.122027] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.122054] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.150718] Detected PIPT I-cache on CPU5 [ 0.150728] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.150742] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.179379] Detected PIPT I-cache on CPU6 [ 0.179390] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.179406] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.208037] Detected PIPT I-cache on CPU7 [ 0.208048] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.208062] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.238734] Detected PIPT I-cache on CPU8 [ 0.238757] GICv3: CPU8: found redistributor 20000 region 0:0x000000000f540000 [ 0.238787] CPU8: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.267444] Detected PIPT I-cache on CPU9 [ 0.267454] GICv3: CPU9: found redistributor 20100 region 0:0x000000000f560000 [ 0.267471] CPU9: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.296721] Detected PIPT I-cache on CPU10 [ 0.296732] GICv3: CPU10: found redistributor 20200 region 0:0x000000000f580000 [ 0.296748] CPU10: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.325985] Detected PIPT I-cache on CPU11 [ 0.325996] GICv3: CPU11: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.326012] CPU11: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.326070] smp: Brought up 1 node, 12 CPUs [ 0.326137] SMP: Total of 12 processors activated. [ 0.326143] CPU features: detected: Privileged Access Never [ 0.326145] CPU features: detected: LSE atomic instructions [ 0.326148] CPU features: detected: User Access Override [ 0.326151] CPU features: detected: 32-bit EL0 Support [ 0.326154] CPU features: detected: Common not Private translations [ 0.326157] CPU features: detected: RAS Extension Support [ 0.326160] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.326164] CPU features: detected: CRC32 instructions [ 0.326166] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.364452] CPU: All CPU(s) started at EL2 [ 0.367817] devtmpfs: initialized [ 0.376311] Registered cp15_barrier emulation handler [ 0.376323] Registered setend emulation handler [ 0.376329] KASLR enabled [ 0.376448] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.376463] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.378005] pinctrl core: initialized pinctrl subsystem [ 0.378537] SMBIOS 3.0.0 present. [ 0.378548] DMI: Unknown Systel Kite-Strike II Jetson Orin CB 810882/Systel Kite-Strike II Jetson Orin CB 810882, BIOS 3.1-32827747 03/19/2023 [ 0.378831] NET: Registered protocol family 16 [ 0.379697] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.379905] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.380114] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.380147] audit: initializing netlink subsys (disabled) [ 0.380241] audit: type=2000 audit(0.380:1): state=initialized audit_enabled=0 res=1 [ 0.380411] thermal_sys: Registered thermal governor 'step_wise' [ 0.380413] thermal_sys: Registered thermal governor 'power_allocator' [ 0.380418] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.381479] cpuidle: using governor menu [ 0.381589] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.381712] ASID allocator initialised with 32768 entries [ 0.381810] Serial: AMBA PL011 UART driver [ 0.383090] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.383117] Tegra reboot handler registered. [ 0.398303] mc: mapped MMIO address: 0xffff8000111f0000 -> 0x2c10000 [ 0.398316] mc: mapped MMIO address: 0xffff800011210000 -> 0x2c20000 [ 0.398324] mc: mapped MMIO address: 0xffff800011230000 -> 0x2c30000 [ 0.398331] mc: mapped MMIO address: 0xffff800011250000 -> 0x2c40000 [ 0.398338] mc: mapped MMIO address: 0xffff800011270000 -> 0x2c50000 [ 0.398346] mc: mapped MMIO address: 0xffff800011290000 -> 0x2b80000 [ 0.398352] mc: mapped MMIO address: 0xffff8000112b0000 -> 0x2b90000 [ 0.398359] mc: mapped MMIO address: 0xffff8000112d0000 -> 0x2ba0000 [ 0.398365] mc: mapped MMIO address: 0xffff8000112f0000 -> 0x2bb0000 [ 0.398371] mc: mapped MMIO address: 0xffff800011310000 -> 0x1700000 [ 0.398377] mc: mapped MMIO address: 0xffff800011330000 -> 0x1710000 [ 0.398383] mc: mapped MMIO address: 0xffff800011350000 -> 0x1720000 [ 0.398390] mc: mapped MMIO address: 0xffff800011370000 -> 0x1730000 [ 0.398396] mc: mapped MMIO address: 0xffff800011390000 -> 0x1740000 [ 0.398404] mc: mapped MMIO address: 0xffff8000113b0000 -> 0x1750000 [ 0.398410] mc: mapped MMIO address: 0xffff8000113d0000 -> 0x1760000 [ 0.398416] mc: mapped MMIO address: 0xffff8000113f0000 -> 0x1770000 [ 0.398425] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.398447] mc-err: mcerr ops are set to t23x [ 0.402758] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.402765] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.402768] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.402771] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404487] ACPI: Interpreter disabled. [ 0.405679] vdd-2v5-sw: supplied by vdd-3v3-sys [ 0.405857] vdd-1v2-sw: supplied by vdd-3v3-sys [ 0.406118] iommu: Default domain type: Translated [ 0.406160] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.406322] SCSI subsystem initialized [ 0.406401] usbcore: registered new interface driver usbfs [ 0.406418] usbcore: registered new interface driver hub [ 0.406432] usbcore: registered new device driver usb [ 0.406603] mc: Linux media interface: v0.10 [ 0.406612] videodev: Linux video capture interface: v2.00 [ 0.406746] pps_core: LinuxPPS API ver. 1 registered [ 0.406750] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.406760] PTP clock support registered [ 0.406971] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 0.406994] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 0.408266] Registered efivars operations [ 0.408650] FPGA manager framework [ 0.408696] Advanced Linux Sound Architecture Driver Initialized. [ 0.408956] Bluetooth: Core ver 2.22 [ 0.408988] NET: Registered protocol family 31 [ 0.408991] Bluetooth: HCI device and connection manager initialized [ 0.409000] Bluetooth: HCI socket layer initialized [ 0.409005] Bluetooth: L2CAP socket layer initialized [ 0.409013] Bluetooth: SCO socket layer initialized [ 0.409539] camchar: rtcpu character device driver loaded [ 0.409761] clocksource: Switched to clocksource arch_sys_counter [ 0.568985] VFS: Disk quotas dquot_6.6.0 [ 0.569030] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.569180] pnp: PnP ACPI: disabled [ 0.571422] la/ptsa driver initialized. [ 0.571482] NET: Registered protocol family 2 [ 0.571691] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.573845] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.573918] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.574301] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.574816] TCP: Hash tables configured (established 524288 bind 65536) [ 0.574916] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.575017] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.575205] NET: Registered protocol family 1 [ 0.575467] RPC: Registered named UNIX socket transport module. [ 0.575480] RPC: Registered udp transport module. [ 0.575483] RPC: Registered tcp transport module. [ 0.575485] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.575501] PCI: CLS 0 bytes, default 64 [ 0.575619] Trying to unpack rootfs image as initramfs... [ 0.698636] Freeing initrd memory: 9120K [ 0.700884] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.701047] kvm [1]: IPA Size Limit: 48 bits [ 0.701073] kvm [1]: GICv3: no GICV resource entry [ 0.701078] kvm [1]: disabling GICv2 emulation [ 0.701096] kvm [1]: GIC system register CPU interface enabled [ 0.701204] kvm [1]: vgic interrupt IRQ9 [ 0.701357] kvm [1]: VHE mode initialized successfully [ 0.702035] Initialise system trusted keyrings [ 0.702116] workingset: timestamp_bits=46 max_order=24 bucket_order=0 [ 0.704254] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.704538] NFS: Registering the id_resolver key type [ 0.704554] Key type id_resolver registered [ 0.704557] Key type id_legacy registered [ 0.704605] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.704615] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.704632] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.716407] NET: Registered protocol family 38 [ 0.716415] Key type asymmetric registered [ 0.716422] Asymmetric key parser 'x509' registered [ 0.716442] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.716506] io scheduler mq-deadline registered [ 0.716511] io scheduler kyber registered [ 0.719350] tegra234-pinctrl 2430000.pinmux: there is not valid maps for state drive [ 0.719358] tegra234-pinctrl 2430000.pinmux: there is not valid maps for state unused [ 0.720833] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.720861] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.720878] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.720895] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.721647] efifb: probing for efifb [ 0.721677] efifb: framebuffer at 0x1004000000, using 8640k, total 8640k [ 0.721680] efifb: mode is 1920x1080x32, linelength=8192, pages=1 [ 0.721684] efifb: scrolling: redraw [ 0.721687] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.724635] Console: switching to colour frame buffer device 240x67 [ 0.727376] fb0: EFI VGA frame buffer device [ 0.728736] tegra_dc_assign_hw_data: no matching compatible node [ 0.728757] tegradccommon module_init failed [ 0.728770] tegradc module_init failed [ 0.729011] EINJ: ACPI disabled. [ 0.730183] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.730206] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 0.730222] tegra-pmc: ### PMC reset level: L0 [ 0.730234] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.731378] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.738022] random: fast init done [ 0.738110] printk: console [ttyTCU0] enabled [ 2.439170] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.445052] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.449802] arm-smmu 12000000.iommu: stage 1 translation [ 2.455159] arm-smmu 12000000.iommu: stage 2 translation [ 2.460625] arm-smmu 12000000.iommu: nested translation [ 2.465787] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.472961] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 2.481770] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.485999] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.492562] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.500003] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.505601] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.510325] arm-smmu 10000000.iommu: stage 1 translation [ 2.515834] arm-smmu 10000000.iommu: stage 2 translation [ 2.521260] arm-smmu 10000000.iommu: nested translation [ 2.526686] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.533862] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 2.542601] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.547073] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.553633] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.560651] arm-smmu 8000000.iommu: probing hardware configuration... [ 2.566764] arm-smmu 8000000.iommu: SMMUv2 with: [ 2.571483] arm-smmu 8000000.iommu: stage 1 translation [ 2.576997] arm-smmu 8000000.iommu: stage 2 translation [ 2.582421] arm-smmu 8000000.iommu: nested translation [ 2.587585] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 2.594760] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 2.603525] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 2.607971] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.614534] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.621843] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.630516] tegra_profiler: version: 1.151, samples/io: 51/30 [ 2.634746] tegra_profiler: auth: init [ 2.638823] nvsciipc: loaded module [ 2.643690] tun: Universal TUN/TAP device driver, 1.6 [ 2.647681] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.654443] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.659972] e1000e: Intel(R) PRO/1000 Network Driver [ 2.664765] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.670638] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.676047] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.681895] PPP generic driver version 2.4.2 [ 2.686246] PPP BSD Compression module registered [ 2.690838] PPP Deflate Compression module registered [ 2.696099] PPP MPPE Compression module registered [ 2.701097] usbcore: registered new interface driver r8152 [ 2.706422] usbcore: registered new interface driver asix [ 2.711757] usbcore: registered new interface driver ax88179_178a [ 2.717881] usbcore: registered new interface driver cdc_ether [ 2.723836] usbcore: registered new interface driver net1080 [ 2.729430] usbcore: registered new interface driver cdc_subset [ 2.735468] usbcore: registered new interface driver zaurus [ 2.741166] usbcore: registered new interface driver cdc_ncm [ 2.746845] usbcore: registered new interface driver aqc111 [ 2.752367] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.758570] ohci-pci: OHCI PCI platform driver [ 2.762865] ohci-platform: OHCI generic platform driver [ 2.768216] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.774148] usbcore: registered new interface driver uas [ 2.779147] usbcore: registered new interface driver usb-storage [ 2.785127] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.790884] mousedev: PS/2 mouse device common for all mice [ 2.796297] usbcore: registered new interface driver xpad [ 2.803604] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.807057] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:22 UTC (22) [ 2.814850] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.821080] i2c /dev entries driver [ 2.824592] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.830251] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.835616] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.841039] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.846371] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.851883] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.857324] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 2.862704] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.871248] device-mapper: uevent: version 1.0.3 [ 2.872655] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.882221] sdhci: Secure Digital Host Controller Interface driver [ 2.887276] sdhci: Copyright(c) Pierre Ossman [ 2.891560] Synopsys Designware Multimedia Card Interface Driver [ 2.897670] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.903533] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.903688] sdhci-tegra 3400000.sdhci: Adding to iommu group 4 [ 2.903861] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 2.904671] tegra-bpmp bpmp: firmware: 463f4d5b75234b74bb7f-1377b684fe5 [ 2.905931] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 2.906372] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x81 [ 2.906823] nvvrs_pseq 4-003c: CAUTION: interrupt status reg:0x10 set to 0x40 [ 2.906824] nvvrs_pseq 4-003c: Clearing interrupts [ 2.916588] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 2.956606] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful ÿâdebugfs initialized ÿá[ 4.715351] hid: raw HID events driver (C) Jiri Kosina [ 4.716300] usbcore: registered new interface driver usbhid [ 4.717013] usbhid: USB HID core driver [ 4.718195] tegra-dce d800000.dce: Adding to iommu group 5 [ 4.720109] dce: dce_ipc_channel_init:319 Invalid Channel State [0x0] for ch_type [2] [ 4.721371] tegra234-aon c000000.aon: Adding to iommu group 6 [ 4.722626] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 4.723594] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 4.724483] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x1] [ 4.725314] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [1] ... [ 4.726130] dce: dce_admin_setup_clients_ipc:529 Get queue info failed for [2] [ 4.727025] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 4.727876] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [3] ... [ 4.728918] dce: dce_start_boot_flow:173 DCE_BOOT_DONE [ 4.730052] c000000.aon:hsp: probed [ 4.730933] tegra234-aon c000000.aon: init done [ 4.731935] tegra23x-psc e860000.psc: Adding to iommu group 7 [ 4.734976] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 4.740887] tegra23x-psc e860000.psc: init done [ 4.745765] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 8 [ 4.752571] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 4.763601] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.768933] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.780087] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.790798] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.801693] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.813553] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.826063] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.837931] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (122) [ 4.844147] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.852503] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=97e50cbff52bc4b542b2989187109c001c01cf77 [ 4.865128] t19x_cache tegra-cache: probed [ 4.867511] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 4.881711] optee: probing for conduit method. [ 4.882554] optee: revision 3.19 (3f29c61f) [ 4.882656] optee: dynamic shared memory is enabled [ 4.887024] optee: initialized driver [ 4.902962] nvpmodel: initialized successfully [ 4.903867] tegra_hv: get_hvd: not initialized yet [ 4.904702] user_ivc_mempool: hypervisor not present [ 4.905880] usbcore: registered new interface driver snd-usb-audio [ 4.911757] u32 classifier [ 4.913871] input device check on [ 4.917543] Actions configured [ 4.920910] Initializing XFRM netlink socket [ 4.925699] NET: Registered protocol family 10 [ 4.931119] Segment Routing with IPv6 [ 4.933242] NET: Registered protocol family 17 [ 4.937604] NET: Registered protocol family 15 [ 4.942022] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.955712] Bluetooth: RFCOMM socket layer initialized [ 4.960260] Bluetooth: RFCOMM ver 1.11 [ 4.964194] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.970051] Bluetooth: HIDP socket layer initialized [ 4.975868] 9pnet: Installing 9P2000 support [ 4.979467] Key type dns_resolver registered [ 4.984401] registered taskstats version 1 [ 4.987914] Loading compiled-in X.509 certificates [ 5.002706] Loaded X.509 cert 'Build time autogenerated kernel key: e63fb224cdc2a940ac382bb67b420fcb52cc4aee' [ 5.004032] tegra194-pcie 14180000.pcie: Adding to iommu group 9 [ 5.015444] tegra194-pcie 14180000.pcie: Using GICv2m MSI allocator [ 5.017122] tegra194-pcie 14100000.pcie: Adding to iommu group 10 [ 5.027665] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 5.028932] tegra194-pcie 14160000.pcie: Adding to iommu group 11 [ 5.039794] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 5.041044] tegra194-pcie 141a0000.pcie: Adding to iommu group 12 [ 5.051783] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 5.053252] tegra194-pcie 141c0000.pcie: Adding to iommu group 13 [ 5.064134] tegra194-pcie 141c0000.pcie: Using GICv2m MSI allocator [ 5.065292] tegra194-pcie 141e0000.pcie: Adding to iommu group 14 [ 5.076628] tegra194-pcie 141e0000.pcie: Using GICv2m MSI allocator [ 5.102182] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 15 [ 5.106155] host1x 13e40000.host1x: Adding to iommu group 16 [ 5.129781] host1x 13e40000.host1x: initialized [ 5.130962] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 17 [ 5.132212] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 5.134578] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 18 [ 5.135821] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 5.138139] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 19 [ 5.139380] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 5.149399] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 20 [ 5.155855] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.167144] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 21 [ 5.173696] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.185180] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 22 [ 5.191761] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.203212] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 23 [ 5.209788] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.221193] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 24 [ 5.227808] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.239262] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 25 [ 5.245840] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 5.257240] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 26 [ 5.263847] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 5.275270] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 27 [ 5.281879] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 5.293286] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 28 [ 5.299899] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 5.311335] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 29 [ 5.317927] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 5.329372] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 30 [ 5.335945] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 5.347390] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 31 [ 5.353985] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 5.365393] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 32 [ 5.371987] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 5.383464] falcon 15340000.vic: Adding to iommu group 33 [ 5.393310] falcon 15340000.vic: initialized [ 5.394438] falcon 15380000.nvjpg: Adding to iommu group 34 [ 5.401259] falcon 15380000.nvjpg: initialized [ 5.402235] falcon 15540000.nvjpg1: Adding to iommu group 35 [ 5.411368] falcon 15540000.nvjpg1: initialized [ 5.412743] falcon 154c0000.nvenc: Adding to iommu group 36 [ 5.424182] falcon 154c0000.nvenc: initialized [ 5.425142] falcon 15a50000.ofa: Adding to iommu group 37 [ 5.432141] falcon 15a50000.ofa: initialized [ 5.433083] nvdec 15480000.nvdec: Adding to iommu group 38 [ 5.445520] nvdec 15480000.nvdec: initialized [ 5.446464] tsec 15500000.tsec: Adding to iommu group 39 [ 5.453053] tsec 15500000.tsec: initialized [ 5.462656] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 5.464016] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 5.465058] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.471358] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 5.477399] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.482625] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.489761] tegra194-isp5 14800000.isp: Adding to iommu group 40 [ 5.496229] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.502533] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 5.508614] driver not enabled, cannot register any devices [ 5.514390] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 41 [ 5.522112] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 42 [ 5.529360] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 5.538454] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 5.544480] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 5.553944] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 5.560133] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.569996] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 5.576086] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 43 [ 5.584541] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000) [ 5.595316] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 44 [ 5.603944] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000) [ 5.614570] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 45 [ 5.623033] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000) [ 5.633836] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 46 [ 5.642287] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000) [ 5.652900] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 47 [ 5.661550] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000) [ 5.672133] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 48 [ 5.680783] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000) [ 5.691394] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 49 [ 5.700031] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000) [ 5.710654] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 50 [ 5.719270] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000) [ 5.729892] pva 16000000.pva0: Adding to iommu group 51 [ 5.754776] pva 16000000.pva0: initialized [ 5.764275] nvdla 15880000.nvdla0: Adding to iommu group 52 [ 5.774792] nvdla 15880000.nvdla0: initialized [ 5.777334] nvdla 158c0000.nvdla1: Adding to iommu group 53 [ 5.787576] nvdla 158c0000.nvdla1: initialized [ 5.790125] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 2 [ 5.791784] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 5.792931] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 5.793794] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 5.794826] serial-tegra 3100000.serial: Adding to iommu group 2 [ 5.796133] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 25, base_baud = 0) is a TEGRA_UART [ 5.801140] serial-tegra 3110000.serial: Adding to iommu group 2 [ 5.806691] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 82, base_baud = 0) is a TEGRA_UART [ 5.815867] serial-tegra 3130000.serial: Adding to iommu group 2 [ 5.821490] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 83, base_baud = 0) is a TEGRA_UART [ 5.830560] serial-tegra 3140000.serial: Adding to iommu group 2 [ 5.836391] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 84, base_baud = 0) is a TEGRA_UART [ 5.858121] pca953x 7-0070: using no AI [ 5.859436] gpiochip2: registered GPIOs 308 to 315 on 7-0070 [ 5.863792] tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing [ 5.880905] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2009000 KHz, changing to: 2035200 KHz [ 5.885026] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2009000 KHz, changing to: 2035200 KHz [ 5.889403] cpufreq: cpufreq_online: CPU8: Running at unlisted initial frequency: 2043000 KHz, changing to: 2112000 KHz [ 5.897429] tegra194-cpufreq e000000.ccplex: probed with ICC [ 5.902330] tegra194-pcie 14180000.pcie: Using GICv2m MSI allocator [ 5.910255] tegra194-pcie 14180000.pcie: host bridge /pcie@14180000 ranges: [ 5.914535] tegra194-pcie 14180000.pcie: IO 0x0038100000..0x00381fffff -> 0x0038100000 [ 5.918734] mmc0: CQHCI version 5.10 [ 5.923017] tegra194-pcie 14180000.pcie: MEM 0x2728000000..0x272fffffff -> 0x0040000000 [ 5.935184] tegra194-pcie 14180000.pcie: MEM 0x2440000000..0x2727ffffff -> 0x2440000000 [ 5.943997] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 5.958509] irq: IRQ260: trimming hierarchy from :interrupt-controller@f400000-1 [ 5.958922] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 5.959438] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 260 [ 6.054812] mmc0: Command Queue Engine enabled [ 6.055631] mmc0: periodic cache flush enabled [ 6.056451] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.057915] mmcblk0: mmc0:0001 G1M15M 59.3 GiB [ 6.058792] mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (511:0) [ 6.062713] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 7.025919] tegra194-pcie 14180000.pcie: Phy link never came up [ 7.026871] tegra194-pcie 14180000.pcie: PCI host bridge to bus 0000:00 [ 7.027755] pci_bus 0000:00: root bus resource [bus 00-ff] [ 7.028604] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x38100000-0x381fffff]) [ 7.029562] pci_bus 0000:00: root bus resource [mem 0x2728000000-0x272fffffff] (bus address [0x40000000-0x47ffffff]) [ 7.030560] pci_bus 0000:00: root bus resource [mem 0x2440000000-0x2727ffffff pref] [ 7.031515] pci 0000:00:00.0: [10de:229c] type 01 class 0x060400 [ 7.032548] pci 0000:00:00.0: PME# supported from D0 D3hot [ 7.036863] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 7.037717] pci 0000:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 7.038847] pcieport 0000:00:00.0: Adding to iommu group 9 [ 7.039849] pcieport 0000:00:00.0: PME: Signaling with IRQ 63 [ 7.041164] pcieport 0000:00:00.0: AER: enabled with IRQ 63 [ 7.042243] pci_bus 0000:01: busn_res: [bus 01-ff] is released [ 7.043160] pci 0000:00:00.0: Removing from iommu group 9 [ 7.044002] pci_bus 0000:00: busn_res: [bus 00-ff] is released [ 7.046650] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 7.048359] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 7.053874] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 7.062528] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 7.071184] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 8.178083] tegra194-pcie 14100000.pcie: Phy link never came up [ 8.178994] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 8.179839] pci_bus 0001:00: root bus resource [bus 00-ff] [ 8.180658] pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x30100000-0x301fffff]) [ 8.181590] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 8.182559] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 8.183469] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 8.184442] pci 0001:00:00.0: PME# supported from D0 D3hot [ 8.188392] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 8.189220] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 8.190275] pcieport 0001:00:00.0: Adding to iommu group 10 [ 8.191232] pcieport 0001:00:00.0: PME: Signaling with IRQ 65 [ 8.192508] pcieport 0001:00:00.0: AER: enabled with IRQ 65 [ 8.193542] pci_bus 0001:01: busn_res: [bus 01-ff] is released [ 8.194450] pci 0001:00:00.0: Removing from iommu group 10 [ 8.195278] pci_bus 0001:00: busn_res: [bus 00-ff] is released [ 8.197814] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 8.200736] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 8.206539] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 8.215197] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 8.223851] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 9.326084] tegra194-pcie 14160000.pcie: Phy link never came up [ 9.326946] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 9.327740] pci_bus 0004:00: root bus resource [bus 00-ff] [ 9.328509] pci_bus 0004:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x36100000-0x361fffff]) [ 9.329390] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 9.330291] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 9.331171] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 9.332110] pci 0004:00:00.0: PME# supported from D0 D3hot [ 9.336007] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 9.336765] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 9.337768] pcieport 0004:00:00.0: Adding to iommu group 11 [ 9.338657] pcieport 0004:00:00.0: PME: Signaling with IRQ 67 [ 9.339875] pcieport 0004:00:00.0: AER: enabled with IRQ 67 [ 9.340835] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 9.341656] pci 0004:00:00.0: Removing from iommu group 11 [ 9.342418] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 9.344771] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 9.454430] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 9.455244] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 9.456077] tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000 [ 9.456902] tegra194-pcie 141a0000.pcie: MEM 0x2740000000..0x2b27ffffff -> 0x2740000000 [ 10.558082] tegra194-pcie 141a0000.pcie: Phy link never came up [ 10.558904] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 10.559663] pci_bus 0005:00: root bus resource [bus 00-ff] [ 10.560394] pci_bus 0005:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x3a100000-0x3a1fffff]) [ 10.561245] pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff]) [ 10.562124] pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref] [ 10.562950] pci 0005:00:00.0: [10de:229a] type 01 class 0x060400 [ 10.563843] pci 0005:00:00.0: PME# supported from D0 D3hot [ 10.567708] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 10.568439] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 10.569386] pcieport 0005:00:00.0: Adding to iommu group 12 [ 10.570261] pcieport 0005:00:00.0: PME: Signaling with IRQ 69 [ 10.571439] pcieport 0005:00:00.0: AER: enabled with IRQ 69 [ 10.572370] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 10.573159] pci 0005:00:00.0: Removing from iommu group 12 [ 10.573889] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 10.576488] tegra194-pcie 141c0000.pcie: Using GICv2m MSI allocator [ 10.580773] tegra194-pcie 141c0000.pcie: host bridge /pcie@141c0000 ranges: [ 10.586451] tegra194-pcie 141c0000.pcie: IO 0x003c100000..0x003c1fffff -> 0x003c100000 [ 10.595106] tegra194-pcie 141c0000.pcie: MEM 0x2e28000000..0x2e2fffffff -> 0x0040000000 [ 10.603765] tegra194-pcie 141c0000.pcie: MEM 0x2b40000000..0x2e27ffffff -> 0x2b40000000 [ 11.706084] tegra194-pcie 141c0000.pcie: Phy link never came up [ 11.706902] tegra194-pcie 141c0000.pcie: PCI host bridge to bus 0006:00 [ 11.707650] pci_bus 0006:00: root bus resource [bus 00-ff] [ 11.708378] pci_bus 0006:00: root bus resource [io 0x400000-0x4fffff] (bus address [0x3c100000-0x3c1fffff]) [ 11.709218] pci_bus 0006:00: root bus resource [mem 0x2e28000000-0x2e2fffffff] (bus address [0x40000000-0x47ffffff]) [ 11.710087] pci_bus 0006:00: root bus resource [mem 0x2b40000000-0x2e27ffffff pref] [ 11.710920] pci 0006:00:00.0: [10de:229c] type 01 class 0x060400 [ 11.711805] pci 0006:00:00.0: PME# supported from D0 D3hot [ 11.715634] pci 0006:00:00.0: PCI bridge to [bus 01-ff] [ 11.716357] pci 0006:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 11.717316] pcieport 0006:00:00.0: Adding to iommu group 13 [ 11.718183] pcieport 0006:00:00.0: PME: Signaling with IRQ 71 [ 11.719360] pcieport 0006:00:00.0: AER: enabled with IRQ 71 [ 11.720800] tegra194-pcie 141e0000.pcie: Using GICv2m MSI allocator [ 11.722400] tegra194-pcie 141e0000.pcie: host bridge /pcie@141e0000 ranges: [ 11.723158] tegra194-pcie 141e0000.pcie: IO 0x003e100000..0x003e1fffff -> 0x003e100000 [ 11.725665] tegra194-pcie 141e0000.pcie: MEM 0x3228000000..0x322fffffff -> 0x0040000000 [ 11.734162] tegra194-pcie 141e0000.pcie: MEM 0x2e40000000..0x3227ffffff -> 0x2e40000000 [ 12.838083] tegra194-pcie 141e0000.pcie: Phy link never came up [ 12.838881] tegra194-pcie 141e0000.pcie: PCI host bridge to bus 0007:00 [ 12.839629] pci_bus 0007:00: root bus resource [bus 00-ff] [ 12.840342] pci_bus 0007:00: root bus resource [io 0x500000-0x5fffff] (bus address [0x3e100000-0x3e1fffff]) [ 12.841188] pci_bus 0007:00: root bus resource [mem 0x3228000000-0x322fffffff] (bus address [0x40000000-0x47ffffff]) [ 12.842067] pci_bus 0007:00: root bus resource [mem 0x2e40000000-0x3227ffffff pref] [ 12.842901] pci 0007:00:00.0: [10de:229a] type 01 class 0x060400 [ 12.843779] pci 0007:00:00.0: PME# supported from D0 D3hot [ 12.847597] pci 0007:00:00.0: PCI bridge to [bus 01-ff] [ 12.848328] pci 0007:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 12.849303] pcieport 0007:00:00.0: Adding to iommu group 14 [ 12.850165] pcieport 0007:00:00.0: PME: Signaling with IRQ 73 [ 12.851339] pcieport 0007:00:00.0: AER: enabled with IRQ 73 [ 12.852260] pci_bus 0007:01: busn_res: [bus 01-ff] is released [ 12.853055] pci 0007:00:00.0: Removing from iommu group 14 [ 12.853793] pci_bus 0007:00: busn_res: [bus 00-ff] is released [ 12.855559] avdd-cam-2v8: supplied by vdd-3v3-sys [ 12.858038] vdd-dp: supplied by vdd-3v3-sys [ 12.862083] vdd-3v3-sd: supplied by vdd-3v3-sys [ 12.866862] usb-vbus0-en: supplied by vdd-5v-sys [ 12.871529] usb-vbus1-en: supplied by vdd-5v-sys [ 12.877514] irq: IRQ261: trimming hierarchy from :pmc@c360000 [ 12.882392] irq: IRQ262: trimming hierarchy from :pmc@c360000 [ 12.890711] tegra194-isp5 14800000.isp: initialized [ 12.892318] driver not enabled, cannot register any devices [ 12.904646] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 12.905384] driver not enabled, cannot register any devices [ 12.909891] (NULL device *): fops function table already registered [ 12.917285] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 12.922246] driver not enabled, cannot register any devices [ 12.943454] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 12.944289] tegra-xusb 3610000.xhci: xHCI Host Controller [ 12.945029] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 12.951236] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 12.959886] tegra-xusb 3610000.xhci: irq 239, io mem 0x03610000 [ 12.965876] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 12.974045] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.981218] usb usb1: Product: xHCI Host Controller [ 12.986206] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 12.992417] usb usb1: SerialNumber: 3610000.xhci [ 12.997269] hub 1-0:1.0: USB hub found [ 13.000922] hub 1-0:1.0: 4 ports detected [ 13.005058] tegra-xusb 3610000.xhci: xHCI Host Controller [ 13.010361] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 13.017971] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 13.025402] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 13.033548] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.040807] usb usb2: Product: xHCI Host Controller [ 13.045792] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 13.052012] usb usb2: SerialNumber: 3610000.xhci [ 13.056909] hub 2-0:1.0: USB hub found [ 13.060419] hub 2-0:1.0: 4 ports detected [ 13.065385] bwmgr API not supported [ 13.065387] tegra-xusb 3610000.xhci: can't register EMC bwmgr (-22) [ 13.075325] nvethernet 2310000.ethernet: Adding to iommu group 54 [ 13.075336] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 13.080510] nvethernet 2310000.ethernet: failed to read skip mac reset flag, default 0 [ 13.093500] nvethernet 2310000.ethernet: failed to read MDIO address [ 13.099887] nvethernet 2310000.ethernet: setting to default DMA bit mask [ 13.108308] nvethernet 2310000.ethernet: missing nvidia,pad_auto_cal_pu_offset, setting default 0 [ 13.115460] nvethernet 2310000.ethernet: missing nvidia,pad_auto_cal_pd_offset, setting default 0 [ 13.116807] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 260 [ 13.124165] nvethernet 2310000.ethernet: failed to get phy reset gpio error: -2 [ 13.141277] nvethernet 2310000.ethernet: Ethernet MAC address: 48:b0:2d:e1:40:f5 [ 13.145166] nvethernet 2310000.ethernet: macsec param in DT is missing or disabled [ 13.152109] nvethernet 2310000.ethernet: Macsec not supported/Not enabled in DT [ 13.160526] nvethernet 2310000.ethernet: ethsw0 (HW ver: 53) created with 8 DMA channels [ 13.167688] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 13.172994] irq: IRQ265: trimming hierarchy from :interrupt-controller@f400000-1 [ 13.180613] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 13.186549] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 13.193699] tegra-se-nvhost 15810000.se: Adding to iommu group 55 [ 13.199707] tegra-se-nvhost 15810000.se: initialized [ 13.215486] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 13.216351] tegra-se-nvhost 15820000.se: AÿâWARNING: clock_disable: clk_power_ungate on gated domain 35 for gpusysclk ÿádding to iommu group 56 [ 13.217396] tegra-se-nvhost 15820000.se: initialized [ 13.223970] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 13.228150] tegra-se-nvhost 15840000.se: Adding to iommu group 57 [ 13.234656] tegra-se-nvhost 15840000.se: initialized [ 13.24156ÿâWARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc1clk ÿá2] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 13.246092] tegra_actmon d230000.actmon: in actmon_register()... [ 13.251677] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 13.257391] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 13.265210] hvc_sysfs: hypeÿâWARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc0clk ÿárvisor is not present [ 13.265895] usb 1-3: new high-speed USB device number 2 using tegra-xusb [ 13.400001] ALSA device list: [ 13.400686] No soundcards found. [ 13.401999] Freeing unused kernel memory: 3968K [ 13.402749] Run /init as init process [ 13.415187] Root device found: mmcblk0p1 [ 13.419631] Found dev node: /dev/mmcblk0p1 [ 13.423963] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 13.424854] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 13.427392] hub 1-3:1.0: USB hub found [ 13.428577] hub 1-3:1.0: 4 ports detected [ 13.444380] random: crng init done [ 13.508378] EXT4-fs (mmcblk0p1): 3 orphan inodes deleted [ 13.509133] EXT4-fs (mmcblk0p1): recovery complete [ 13.513593] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 13.515514] Rootfs mounted over mmcblk0p1 [ 13.523412] Switching from initrd to actual rootfs [ 13.557762] usb 1-4: new high-speed USB device number 3 using tegra-xusb [ 13.635230] systemd[1]: System time before build time, advancing clock. [ 13.671325] systemd[1]: systemd 245.4-4ubuntu3.19 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 13.673732] systemd[1]: Detected architecture arm64. [ 13.704294] systemd[1]: No hostname configured. [ 13.705086] systemd[1]: Set hostname to . [ 13.715846] usb 1-4: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 13.716744] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 13.718898] hub 1-4:1.0: USB hub found [ 13.720087] hub 1-4:1.0: 4 ports detected [ 13.879916] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 13.880987] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 13.882682] systemd[1]: Created slice system-modprobe.slice. [ 13.884540] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 13.886271] systemd[1]: Reached target Slices. [ 13.887825] systemd[1]: Reached target Swap. [ 13.889571] systemd[1]: Listening on RPCbind Server Activation Socket. [ 13.891334] systemd[1]: Listening on fsck to fsckd communication Socket. [ 13.893033] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 13.894873] systemd[1]: Listening on Journal Audit Socket. [ 13.896582] systemd[1]: Listening on Journal Socket (/dev/log). [ 13.898332] systemd[1]: Listening on Journal Socket. [ 13.900056] systemd[1]: Listening on udev Control Socket. [ 13.901791] systemd[1]: Listening on udev Kernel Socket. [ 13.904358] systemd[1]: Mounting Huge Pages File System... [ 13.906984] systemd[1]: Mounting POSIX Message Queue File System... [ 13.909685] systemd[1]: Mounting Kernel Debug File System... [ 13.912307] systemd[1]: Mounting Kernel Trace File System... [ 13.915138] systemd[1]: Starting Journal Service... [ 13.917710] systemd[1]: Starting Set the console keyboard layout... [ 13.920452] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 13.925942] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 13.932812] systemd[1]: Starting Load Kernel Module efi_pstore... [ 13.939006] systemd[1]: Starting Load Kernel Module pstore_blk... [ 13.944970] systemd[1]: Starting Load Kernel Module pstore_zone... [ 13.951174] systemd[1]: Starting Load Kernel Module ramoops... [ 13.957185] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 13.964236] systemd[1]: Started Nameserver information manager. [ 13.969395] systemd[1]: Reached target Network (Pre). [ 13.975267] systemd[1]: Starting Set console scheme... [ 13.980179] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 13.987960] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 14.004646] systemd[1]: Starting Load Kernel Modules... [ 14.007210] systemd[1]: Starting Remount Root and Kernel File Systems... [ 14.010584] systemd[1]: Starting udev Coldplug all Devices... [ 14.013929] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 14.021023] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 14.022431] systemd[1]: Started Journal Service. [ 14.026426] tegra-carveouts tegra-carveouts: fsi :dma coherent mem declare 0x0000001033000000,16777216 [ 14.040085] tegra-carveouts tegra-carveouts: assigned reserved memory node fsi-carveout [ 14.048120] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x0000001049800000,914358272 [ 14.057470] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 14.057475] nvmap_page_pool_init: Total RAM pages: 16075868 [ 14.057476] nvmap_page_pool_init: nvmap page pool size: 2009483 pages (3753 MB) [ 14.057523] nvmap_background_zero_thread: PP zeroing thread starting. [ 14.057608] misc nvmap: created heap vpr base 0x0000001049800000 size (892928KiB) [ 14.060647] misc nvmap: created heap fsi base 0x0000001033000000 size (16384KiB) [ 14.121801] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 14.121801] [ 14.135478] systemd-journald[315]: Received client request to flush runtime journal. [ 14.168640] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 14.172174] tmp401: loading out-of-tree module taints kernel. [ 14.173036] tmp401: module verification failed: signature and/or required key missing - tainting kernel [ 14.175686] tmp401 1-004d: Detected TI TMP411 chip [ 14.176964] tmp401 7-004d: Detected TI TMP411 chip [ 14.482199] using random self ethernet address [ 14.482935] using random host ethernet address [ 15.030075] using random self ethernet address [ 15.030785] using random host ethernet address [ 15.999147] CPU8: shutdown [ 16.185256] CPU9: shutdown [ 16.359218] CPU10: shutdown [ 16.483957] IRQ 127: no longer affine to CPU11 [ 16.484466] CPU11: shutdown [ 16.618646] cma: cma_alloc: alloc failed, req-size: 62816 pages, ret: -12 [ 16.619443] WARNING: CPU: 4 PID: 780 at mm/page_alloc.c:4937 __alloc_pages_nodemask+0x2c8/0x320 [ 16.620650] ---[ end trace 0e9522a2af6f1316 ]--- [ 16.621330] nvgpu: 17000000.ga10b nvgpu_cbc_init_support:91 [ERR] Failed to allocate comptags [ 16.622187] nvgpu: 17000000.ga10b nvgpu_finalize_poweron:1010 [ERR] Failed initialization for: g->ops.cbc.cbc_init_support [ 19.442868] nvgpu: 17000000.ga10b gk20a_power_write:127 [ERR] power_node_write failed at busy [ 22.538093] nvgpu: 17000000.ga10b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ nvgpu_pmu_wait_fw_ack_status+0xbc/0x130 [nvgpu] [ 22.538523] nvgpu: 17000000.ga10b pmu_wait_message_cond:649 [ERR] PMU wait timeout expired. [ 22.538825] nvgpu: 17000000.ga10b nvgpu_pmu_lsfm_bootstrap_ls_falcon:128 [ERR] LSF Load failed [ 22.539105] nvgpu: 17000000.ga10b nvgpu_gr_falcon_load_secure_ctxsw_ucode:714 [ERR] Unable to recover GR falcon [ 22.539419] nvgpu: 17000000.ga10b nvgpu_gr_falcon_init_ctxsw:159 [ERR] fail [ 22.539673] nvgpu: 17000000.ga10b nvgpu_cic_mon_report_err_safety_services:92 [ERR] Error reporting is not supported in this platform [ 22.540016] nvgpu: 17000000.ga10b gr_init_ctxsw_falcon_support:833 [ERR] FECS context switch init error [ 22.540306] nvgpu: 17000000.ga10b nvgpu_finalize_poweron:1010 [ERR] Failed initialization for: g->ops.gr.gr_init_support [ 22.576314] nvgpu: 17000000.ga10b gk20a_power_write:127 [ERR] power_node_write failed at busy [ 23.340317] Please complete system configuration setup on desktop to proceed... [ 26.357941] nvgpu: 17000000.ga10b engine_fb_queue_set_element_use_state:144 [ERR] FBQ last received queue element not processed yet queue_pos 0 [ 26.358428] nvgpu: 17000000.ga10b nvgpu_engine_fb_queue_push:373 [ERR] fb-queue element in use map is in invalid state [ 26.358813] nvgpu: 17000000.ga10b nvgpu_engine_fb_queue_push:401 [ERR] falcon id-0, queue id-1, failed [ 26.359175] nvgpu: 17000000.ga10b pmu_write_cmd:174 [ERR] fail to write cmd to queue 1 [ 26.359501] nvgpu: 17000000.ga10b nvgpu_pmu_rpc_execute:713 [ERR] Failed to execute RPC status=0xffffffea, func=0x3 [ 26.359863] nvgpu: 17000000.ga10b gv100_pmu_lsfm_bootstrap_ls_falcon:95 [ERR] Failed to execute RPC, status=0xffffffea [ 26.360207] nvgpu: 17000000.ga10b nvgpu_pmu_lsfm_bootstrap_ls_falcon:128 [ERR] LSF Load failed [ 26.360586] nvgpu: 17000000.ga10b nvgpu_gr_falcon_load_secure_ctxsw_ucode:714 [ERR] Unable to recover GR falcon [ 26.362154] nvgpu: 17000000.ga10b nvgpu_gr_falcon_init_ctxsw:159 [ERR] fail [ 26.363279] nvgpu: 17000000.ga10b nvgpu_cic_mon_report_err_safety_services:92 [ERR] Error reporting is not supported in this platform [ 26.372989] nvgpu: 17000000.ga10b gr_init_ctxsw_falcon_support:833 [ERR] FECS context switch init error [ 26.383135] nvgpu: 17000000.ga10b nvgpu_finalize_poweron:1010 [ERR] Failed initialization for: g->ops.gr.gr_init_support [ 26.433155] nvgpu: 17000000.ga10b gk20a_power_write:127 [ERR] power_node_write failed at busy [ 26.513869] nvgpu: 17000000.ga10b engine_fb_queue_set_element_use_state:144 [ERR] FBQ last received queue element not processed yet queue_pos 0 [ 26.514297] nvgpu: 17000000.ga10b nvgpu_engine_fb_queue_push:373 [ERR] fb-queue element in use map is in invalid state [ 26.514637] nvgpu: 17000000.ga10b nvgpu_engine_fb_queue_push:401 [ERR] falcon id-0, queue id-1, failed [ 26.514953] nvgpu: 17000000.ga10b pmu_write_cmd:174 [ERR] fail to write cmd to queue 1 [ 26.515256] nvgpu: 17000000.ga10b nvgpu_pmu_rpc_execute:713 [ERR] Failed to execute RPC status=0xffffffea, func=0x3 [ 26.515594] nvgpu: 17000000.ga10b gv100_pmu_lsfm_bootstrap_ls_falcon:95 [ERR] Failed to execute RPC, status=0xffffffea [ 26.515900] nvgpu: 17000000.ga10b nvgpu_pmu_lsfm_bootstrap_ls_falcon:128 [ERR] LSF Load failed [ 26.516502] nvgpu: 17000000.ga10b nvgpu_gr_falcon_load_secure_ctxsw_ucode:714 [ERR] Unable to recover GR falcon [ 26.518070] nvgpu: 17000000.ga10b nvgpu_gr_falcon_init_ctxsw:159 [ERR] fail [ 26.519207] nvgpu: 17000000.ga10b nvgpu_cic_mon_report_err_safety_services:92 [ERR] Error reporting is not supported in this platform [ 26.528944] nvgpu: 17000000.ga10b gr_init_ctxsw_falcon_support:833 [ERR] FECS context switch init error [ 26.539373] nvgpu: 17000000.ga10b nvgpu_finalize_poweron:1010 [ERR] Failed initialization for: g->ops.gr.gr_init_support [ 26.589210] nvgpu: 17000000.ga10b gk20a_power_write:127 [ERR] power_node_write failed at busy