[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253-tegra (zhujinping@test001-OptiPlex-3010) (gcc version 7.5.0 (Linaro GCC 7.5-2019.12) ) #2 SMP PREEMPT Thu Oct 21 21:10:32 CST 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 1006592 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 523776 pages, LIFO batch:31 [ 0.000000] Normal zone: 7624 pages used for memmap [ 0.000000] Normal zone: 482816 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 990776 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 pcie_aspm=off [ 0.000000] PCIe ASPM is disabled [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29952(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3155996K/4026368K available (15358K kernel code, 2954K rwdata, 6772K rodata, 8640K init, 610K bss, 116708K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009630000 ( 6848 KB) [ 0.000000] .init : 0xffffff8009630000 - 0xffffff8009ea0000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009ea0000 - 0xffffff800a182808 ( 2955 KB) [ 0.000000] .bss : 0xffffff800a182808 - 0xffffff800a21b0b4 ( 611 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03dc8000 ( 61 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0f7200000 ( 3954 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000960] Console: colour dummy device 80x25 [ 0.000965] console [tty0] enabled [ 0.000968] bootconsole [uart8250] disabled [ 0.000977] kmemleak: Kernel memory leak detector disabled [ 0.000986] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000992] pid_max: default: 32768 minimum: 301 [ 0.001296] Security Framework initialized [ 0.001451] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001456] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002027] ftrace: allocating 47062 entries in 184 pages [ 0.125566] sched-energy: Sched-energy-costs installed from DT [ 0.125577] ASID allocator initialised with 65536 entries [ 0.160884] tegra-id: chipid=21817. [ 0.160890] tegra-id: opt_subrevision=1. [ 0.160908] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.160916] DTS File Name: /home/zhujinping/dumu/nvidia/tx2-nx-source_r32.6/Linux_for_Tegra/source/public/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.160921] DTB Build time: [ 0.210637] CPU1: Booted secondary processor [4e0f0030] [ 0.242010] CPU2: Booted secondary processor [4e0f0030] [ 0.273021] CPU3: Booted secondary processor [411fd073] [ 0.304990] CPU4: Booted secondary processor [411fd073] [ 0.336981] CPU5: Booted secondary processor [411fd073] [ 0.337038] Brought up 6 CPUs [ 0.337042] SMP: Total of 6 processors activated. [ 0.337047] CPU features: detected feature: 32-bit EL0 Support [ 0.339277] CPU: All CPU(s) started at EL2 [ 0.339409] alternatives: patching kernel code [ 0.341908] devtmpfs: initialized [ 0.365598] Initilizing CustomIPI irq domain [ 0.365748] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.365758] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.373710] pinctrl core: initialized pinctrl subsystem [ 0.373963] OS set in device tree is not L4T. [ 0.374179] regulator-dummy: no parameters [ 0.374322] Initializing plugin-manager [ 0.374377] Plugin module not found [ 0.374412] Plugin-manager status disabled [ 0.375492] NET: Registered protocol family 16 [ 0.376561] pstore: using zlib compression [ 0.376575] console [pstore-1] enabled [ 0.376578] pstore: Registered ramoops as persistent store backend [ 0.376581] ramoops: attached 0x200000@0x175880000, ecc: 0/0 [ 0.389009] cpuidle: using governor menu [ 0.389921] bpmp: waiting for handshake [ 0.389925] bpmp: handshake completed [ 0.389939] bpmp: synchronizing channels [ 0.389950] bpmp: channels synchronized [ 0.389953] bpmp: mail init ok [ 0.391393] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.391398] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.391402] arm-smmu 12000000.iommu: stage 1 translation [ 0.391405] arm-smmu 12000000.iommu: stage 2 translation [ 0.391408] arm-smmu 12000000.iommu: nested translation [ 0.391414] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.391420] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.391424] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.391429] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.391433] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.393240] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009ea4000) [ 0.393253] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.396423] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.397424] Registering BPMP clocks... [ 0.397496] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.397954] Serial: AMBA PL011 UART driver [ 0.398856] tegra_powergate_init: DONE [ 0.398864] DTS File Name: /home/zhujinping/dumu/nvidia/tx2-nx-source_r32.6/Linux_for_Tegra/source/public/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.398868] DTB Build time: [ 0.400152] Tegra reboot handler registered. [ 0.401311] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.401376] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.401389] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.401391] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.401394] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.401545] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.401555] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.401825] iommu: Adding device 3460000.sdhci to group 0 [ 0.402235] iommu: Adding device 3440000.sdhci to group 1 [ 0.403170] iommu: Adding device 3160000.i2c to group 2 [ 0.403566] iommu: Adding device c240000.i2c to group 3 [ 0.403858] iommu: Adding device 3180000.i2c to group 4 [ 0.404155] iommu: Adding device 3190000.i2c to group 5 [ 0.404531] iommu: Adding device 31b0000.i2c to group 6 [ 0.404816] iommu: Adding device 31c0000.i2c to group 7 [ 0.405120] iommu: Adding device c250000.i2c to group 8 [ 0.405411] iommu: Adding device 31e0000.i2c to group 9 [ 0.406862] iommu: Adding device 3210000.spi to group 10 [ 0.407156] iommu: Adding device c260000.spi to group 11 [ 0.407474] iommu: Adding device 3100000.serial to group 12 [ 0.407763] iommu: Adding device 3110000.serial to group 13 [ 0.408046] iommu: Adding device 3130000.serial to group 14 [ 0.409208] iommu: Adding device 2490000.ether_qos to group 15 [ 0.409220] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.410026] iommu: Adding device b000000.rtcpu to group 16 [ 0.411718] iommu: Adding device 13e10000.host1x to group 17 [ 0.412000] iommu: Adding device 13e10000.host1x:ctx0 to group 18 [ 0.412273] iommu: Adding device 13e10000.host1x:ctx1 to group 19 [ 0.412549] iommu: Adding device 13e10000.host1x:ctx2 to group 20 [ 0.412843] iommu: Adding device 13e10000.host1x:ctx3 to group 21 [ 0.413156] iommu: Adding device 13e10000.host1x:ctx4 to group 22 [ 0.413433] iommu: Adding device 13e10000.host1x:ctx5 to group 23 [ 0.413719] iommu: Adding device 13e10000.host1x:ctx6 to group 24 [ 0.413996] iommu: Adding device 13e10000.host1x:ctx7 to group 25 [ 0.414404] iommu: Adding device 150c0000.nvcsi to group 26 [ 0.414959] iommu: Adding device 15700000.vi to group 27 [ 0.415257] iommu: Adding device 15600000.isp to group 28 [ 0.415451] iommu: Adding device 15200000.dc_common to group 29 [ 0.415926] iommu: Adding device 15200000.nvdisplay to group 30 [ 0.416239] iommu: Adding device 15210000.nvdisplay to group 31 [ 0.416539] iommu: Adding device 15340000.vic to group 32 [ 0.416734] iommu: Adding device 154c0000.nvenc to group 33 [ 0.416933] iommu: Adding device 15480000.nvdec to group 34 [ 0.417252] iommu: Adding device 15380000.nvjpg to group 35 [ 0.417453] iommu: Adding device 15500000.tsec to group 36 [ 0.417638] iommu: Adding device 15100000.tsecb to group 37 [ 0.418512] iommu: Adding device 15810000.se to group 38 [ 0.418699] iommu: Adding device 15820000.se to group 39 [ 0.418885] iommu: Adding device 15830000.se to group 40 [ 0.419084] iommu: Adding device 15840000.se to group 41 [ 0.419832] iommu: Adding device smmu_test to group 42 [ 0.420382] mc: mapped MMIO address: 0xffffff800a710000 -> 0x2c10000 [ 0.420393] mc: mapped MMIO address: 0xffffff800a730000 -> 0x2c20000 [ 0.420403] mc: mapped MMIO address: 0xffffff800a750000 -> 0x2c30000 [ 0.420412] mc: mapped MMIO address: 0xffffff800a770000 -> 0x2c40000 [ 0.420422] mc: mapped MMIO address: 0xffffff800a790000 -> 0x2c50000 [ 0.420430] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.420440] mc-err: mcerr ops are set to t18x [ 0.420679] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.421434] iommu: Adding device 3530000.xhci to group 43 [ 0.421447] arm-smmu: forcing sodev map for 3530000.xhci [ 0.421844] iommu: Adding device 3550000.xudc to group 44 [ 0.421854] arm-smmu: forcing sodev map for 3550000.xudc [ 0.422368] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.422375] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.422381] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.422965] iommu: Adding device 17000000.gp10b to group 45 [ 0.423880] tegra-reset 5000000.clock: registered 193 resets. [ 0.425780] iommu: Adding device d000000.bpmp to group 46 [ 0.425978] bpmp: ping status is 0 [ 0.426056] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.427692] bpmp d000000.bpmp: probe ok [ 0.430272] iommu: Adding device 2600000.dma to group 47 [ 0.431057] GPIO line 424 (camera-control-output-low) hogged as output/low [ 0.431089] GPIO line 427 (camera-control-output-low) hogged as output/low [ 0.431135] GPIO line 408 (w-disable1) hogged as output/high [ 0.431171] GPIO line 410 (w-disable2) hogged as output/high [ 0.431203] GPIO line 338 (gpio12) hogged as output/high [ 0.431239] GPIO line 485 (gpio13) hogged as output/high [ 0.431401] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.435311] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.436935] iommu: Adding device 10003000.pcie-controller to group 48 [ 0.436950] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.437257] iommu: Adding device sound to group 49 [ 0.437565] iommu: Adding device 3510000.hda to group 50 [ 0.444090] iommu: Adding device c1a0000.aon to group 51 [ 0.444662] vdd-1v8-ap: 1800 mV [ 0.444861] vdd-ac-bat: 5000 mV [ 0.445050] vdd-3v3-disp-cvb: 3300 mV [ 0.445325] vdd-3v3-cvb: 3300 mV [ 0.445517] vdd-1v8-cvb: 1800 mV [ 0.445706] vdd-fan: 5000 mV [ 0.445887] vdd-hdmi-5v0: 5000 mV [ 0.446069] vdd_sys_en: 1200 mV [ 0.464967] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.467744] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.467932] SCSI subsystem initialized [ 0.468032] libata version 3.00 loaded. [ 0.468188] usbcore: registered new interface driver usbfs [ 0.468222] usbcore: registered new interface driver hub [ 0.468251] usbcore: registered new device driver usb [ 0.471203] random: fast init done [ 0.477920] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.481141] vddio-ddr: at 1125 mV [ 0.484993] avdd_dsi_csi: 1200 mV [ 0.489030] vdd-1v8: 1800 mV [ 0.493033] vdd-3v3-sys: 3300 mV [ 0.493894] spmic-ldo0: at 1800 mV [ 0.494513] spmic-ldo1: at 800 mV [ 0.497028] vddio-3v3: 3300 mV [ 0.497671] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.501026] vdd-rtc: at 800 mV [ 0.501697] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.504999] spmic-ldo6: at 800 mV [ 0.508992] vdd-pex-1v00: 1000 mV [ 0.509593] dvdd-pex: 1000 mV [ 0.511560] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.511689] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.511842] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.512022] max77620 4-003c: max77620 probe successful [ 0.512377] media: Linux media interface: v0.10 [ 0.512403] Linux video capture interface: v2.00 [ 0.515583] pps_core: LinuxPPS API ver. 1 registered [ 0.515586] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.515602] PTP clock support registered [ 0.515820] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.515999] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.516016] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.517104] trusty trusty: trusty version: Built: 12:20:14 Jul 26 2021 [ 0.517119] trusty trusty: selected api version: 3 (requested 3) [ 0.517869] Advanced Linux Sound Architecture Driver Initialized. [ 0.518182] Bluetooth: Core ver 2.22 [ 0.518207] NET: Registered protocol family 31 [ 0.518210] Bluetooth: HCI device and connection manager initialized [ 0.518217] Bluetooth: HCI socket layer initialized [ 0.518224] Bluetooth: L2CAP socket layer initialized [ 0.518237] Bluetooth: SCO socket layer initialized [ 0.518787] vdd-sys-bl: 3300 mV [ 0.520288] camchar: rtcpu character device driver loaded [ 0.520747] gpio tegra-gpio wake61 for gpio=92(L:4) [ 0.520820] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.521644] clocksource: Switched to clocksource arch_sys_counter [ 0.544102] VFS: Disk quotas dquot_6.6.0 [ 0.544176] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.544427] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.544849] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.544963] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.544968] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.544975] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.544979] nvmap_page_pool_init: Total RAM pages: 977415 [ 0.544983] nvmap_page_pool_init: nvmap page pool size: 122176 pages (477 MB) [ 0.545046] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.545510] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.547493] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.553072] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.553256] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.553580] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.553686] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.553832] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.554042] la/ptsa driver initialized. [ 0.554052] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.554054] pre_t19x_iso_plat_init(): max_iso_bw=23040000KB [ 0.554346] NET: Registered protocol family 2 [ 0.554970] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.555126] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.555427] TCP: Hash tables configured (established 32768 bind 32768) [ 0.555472] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.555532] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.555798] NET: Registered protocol family 1 [ 0.556200] RPC: Registered named UNIX socket transport module. [ 0.556203] RPC: Registered udp transport module. [ 0.556206] RPC: Registered tcp transport module. [ 0.556208] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.556214] PCI: CLS 0 bytes, default 64 [ 0.556327] Trying to unpack rootfs image as initramfs... [ 0.764864] Freeing initrd memory: 7068K [ 0.779588] host1x 13e10000.host1x: initialized [ 0.780838] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.782944] audit: initializing netlink subsys (disabled) [ 0.782971] audit: type=2000 audit(0.672:1): initialized [ 0.783366] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.789922] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.790894] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.791407] 9p: Installing v9fs 9p2000 file system support [ 0.793493] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.793550] io scheduler noop registered [ 0.793775] io scheduler cfq registered (default) [ 0.796550] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.858897] iommu: Adding device aconnect@2a41000:adsp_audio to group 52 [ 0.879494] iommu: Adding device 2993000.adsp to group 53 [ 0.880040] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.886662] tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration [ 0.887367] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.887642] tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes [ 0.887828] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.887938] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.889816] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.889962] tsec 15500000.tsec: initialized [ 0.890834] tsec 15100000.tsecb: initialized [ 0.893026] nvdec 15480000.nvdec: initialized [ 0.896744] falcon 15340000.vic: initialized [ 0.897892] falcon 154c0000.nvenc: initialized [ 0.898937] falcon 15380000.nvjpg: initialized [ 0.900838] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.902340] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.903840] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.905328] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.906856] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.908362] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.909861] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.911356] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.913967] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.913975] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.914001] tegradccommon 15200000.dc_common: dma mapping done [ 0.914674] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 0.914712] generic_infoframe_type: 0x87 [ 0.914775] tegradc 15200000.nvdisplay: DT parsed successfully [ 0.914795] tegradc 15200000.nvdisplay: Display dc.ffffff800aba0000 registered with id=0 [ 0.920358] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.920362] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.920365] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.920542] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 0.920548] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 0.923150] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.923155] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.926560] tegradc 15200000.nvdisplay: probed [ 0.926914] Console: switching to colour frame buffer device 80x30 [ 0.926935] tegradc 15200000.nvdisplay: fb registered [ 0.927107] gpio tegra-gpio wake21 for gpio=121(P:1) [ 0.927417] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 0.927530] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 0.927715] tegradc 15210000.nvdisplay: DT parsed successfully [ 0.927746] tegradc 15210000.nvdisplay: Display dc.ffffff800abc0000 registered with id=1 [ 0.927959] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 0.927965] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 0.928530] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 0.928550] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.929222] kfuse 3830000.kfuse: initialized [ 0.930776] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.935918] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.938914] console [ttyS0] disabled [ 0.938949] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 33, base_baud = 25500000) is a Tegra [ 0.938985] console [ttyS0] enabled [ 0.939178] tegradc 15210000.nvdisplay: probed [ 0.939754] tegradc 15210000.nvdisplay: fb registered [ 0.940833] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 34, base_baud = 0) is a TEGRA_UART [ 0.941752] serial-tegra 3130000.serial: RX in PIO mode [ 0.942320] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 35, base_baud = 0) is a TEGRA_UART [ 0.943242] [drm] Initialized [ 0.943588] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 0.943592] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 0.943599] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 0.943606] tegradc 15210000.nvdisplay: blank - powerdown [ 0.943616] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 0.943619] Extcon DP: HPD disabled [ 0.943621] hpd: hpd_switch 0 [ 0.943624] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 0.943631] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 0.943638] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 0.950122] brd: module loaded [ 0.953413] loop: module loaded [ 0.953458] tegra_profiler: version: 1.145, samples/io: 49/28 [ 0.953533] tegra_profiler: auth: init [ 0.954241] THERMAL EST: found 3 subdevs [ 0.954245] THERMAL EST num_resources: 0 [ 0.954249] [THERMAL EST subdev 0] [ 0.954253] [THERMAL EST subdev 1] [ 0.954257] [THERMAL EST subdev 2] [ 0.954264] THERMAL EST: Found 2 profiles, default profile is quiet [ 0.954601] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 0.954604] THERMAL EST: thz register success. [ 0.954688] THERMAL EST: end of probe, return err: 0 [ 0.955484] sd: No Scsi addr parsed to reserve index [ 0.955533] hisi_sas: driver version v1.6 [ 0.960357] libphy: Fixed MDIO Bus: probed [ 0.960929] tun: Universal TUN/TAP device driver, 1.6 [ 0.960932] tun: (C) 1999-2004 Max Krasnyansky [ 0.961546] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.961549] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.961581] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 0.961583] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.961616] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 0.961619] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.961674] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 0.961676] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 0.966396] tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00 [ 0.966403] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.966408] pci_bus 0000:00: root bus resource [mem 0x40100000-0x47ffffff] [ 0.966412] pci_bus 0000:00: root bus resource [mem 0x48000000-0x7fffffff pref] [ 0.966416] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.966446] pci 0000:00:01.0: [10de:10e5] type 01 class 0x060400 [ 0.966561] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.966745] iommu: Adding device 0000:00:01.0 to group 54 [ 0.966754] arm-smmu: forcing sodev map for 0000:00:01.0 [ 0.966835] pci 0000:00:03.0: [10de:10e6] type 01 class 0x060400 [ 0.966945] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.967111] iommu: Adding device 0000:00:03.0 to group 55 [ 0.967116] arm-smmu: forcing sodev map for 0000:00:03.0 [ 0.967178] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.967193] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.967355] pci 0000:01:00.0: [1d97:1160] type 00 class 0x010802 [ 0.967417] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 0.967442] pci 0000:01:00.0: reg 0x18: [io 0x0000-0x00ff] [ 0.967954] iommu: Adding device 0000:01:00.0 to group 56 [ 0.967958] arm-smmu: forcing sodev map for 0000:01:00.0 [ 0.967999] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.968151] pci 0000:02:00.0: [197b:0585] type 00 class 0x010601 [ 0.968198] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x007f] [ 0.968222] pci 0000:02:00.0: reg 0x14: [io 0x0000-0x007f] [ 0.968246] pci 0000:02:00.0: reg 0x18: [io 0x0000-0x007f] [ 0.968270] pci 0000:02:00.0: reg 0x1c: [io 0x0000-0x007f] [ 0.968294] pci 0000:02:00.0: reg 0x20: [io 0x0000-0x007f] [ 0.968319] pci 0000:02:00.0: reg 0x24: [mem 0x00000000-0x00001fff] [ 0.968343] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.968595] pci 0000:02:00.0: PME# supported from D3hot [ 0.968831] iommu: Adding device 0000:02:00.0 to group 57 [ 0.968835] arm-smmu: forcing sodev map for 0000:02:00.0 [ 0.968874] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 0.968939] pci 0000:00:01.0: BAR 14: assigned [mem 0x40100000-0x401fffff] [ 0.968944] pci 0000:00:03.0: BAR 14: assigned [mem 0x40200000-0x402fffff] [ 0.968948] pci 0000:00:01.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.968952] pci 0000:00:03.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.968959] pci 0000:01:00.0: BAR 0: assigned [mem 0x40100000-0x40103fff 64bit] [ 0.968992] pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x10ff] [ 0.969004] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.969009] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.969017] pci 0000:00:01.0: bridge window [mem 0x40100000-0x401fffff] [ 0.969032] pci 0000:02:00.0: BAR 6: assigned [mem 0x40200000-0x4020ffff pref] [ 0.969037] pci 0000:02:00.0: BAR 5: assigned [mem 0x40210000-0x40211fff] [ 0.969049] pci 0000:02:00.0: BAR 0: assigned [io 0x2000-0x207f] [ 0.969061] pci 0000:02:00.0: BAR 1: assigned [io 0x2080-0x20ff] [ 0.969073] pci 0000:02:00.0: BAR 2: assigned [io 0x2100-0x217f] [ 0.969085] pci 0000:02:00.0: BAR 3: assigned [io 0x2180-0x21ff] [ 0.969097] pci 0000:02:00.0: BAR 4: assigned [io 0x2200-0x227f] [ 0.969110] pci 0000:00:03.0: PCI bridge to [bus 02] [ 0.969114] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff] [ 0.969122] pci 0000:00:03.0: bridge window [mem 0x40200000-0x402fffff] [ 0.969134] PCIE: ASPM not enabled [ 0.969326] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.969330] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.969337] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 0.969424] aer 0000:00:01.0:pcie002: service driver aer loaded [ 0.969628] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 0.969651] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.969659] pcie_pme 0000:00:03.0:pcie001: service driver pcie_pme loaded [ 0.969752] aer 0000:00:03.0:pcie002: service driver aer loaded [ 0.970060] nvme nvme0: pci function 0000:01:00.0 [ 0.970088] nvme 0000:01:00.0: enabling device (0000 -> 0002) [ 0.970172] ahci 0000:02:00.0: version 3.0 [ 0.970187] ahci 0000:02:00.0: enabling device (0000 -> 0003) [ 0.970486] ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled [ 0.970560] ahci 0000:02:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x3 impl SATA mode [ 0.970565] ahci 0000:02:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh [ 0.972028] scsi host0: ahci [ 0.972393] scsi host1: ahci [ 0.972605] scsi host2: ahci [ 0.976829] scsi host3: ahci [ 0.977050] scsi host4: ahci [ 0.977188] ata1: SATA max UDMA/133 abar m8192@0x40210000 port 0x40210100 irq 453 [ 0.977194] ata2: SATA max UDMA/133 abar m8192@0x40210000 port 0x40210180 irq 453 [ 0.977196] ata3: DUMMY [ 0.977198] ata4: DUMMY [ 0.977200] ata5: DUMMY [ 1.081972] nvme0n1: p1 [ 1.201776] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 1.203694] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.204121] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 3b 5d 12 [ 1.204144] Using phyrst_lpmode = 1 from DT [ 1.204219] libphy: dwc_phy: probed [ 1.206264] PPP generic driver version 2.4.2 [ 1.206390] PPP BSD Compression module registered [ 1.206393] PPP Deflate Compression module registered [ 1.206407] PPP MPPE Compression module registered [ 1.206411] NET: Registered protocol family 24 [ 1.206454] usbcore: registered new interface driver r8152 [ 1.206487] usbcore: registered new interface driver asix [ 1.206527] usbcore: registered new interface driver ax88179_178a [ 1.206555] usbcore: registered new interface driver cdc_ether [ 1.206584] usbcore: registered new interface driver net1080 [ 1.206612] usbcore: registered new interface driver cdc_subset [ 1.206641] usbcore: registered new interface driver zaurus [ 1.206676] usbcore: registered new interface driver cdc_ncm [ 1.206800] VFIO - User Level meta-driver version: 0.3 [ 1.207613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.207623] ehci-pci: EHCI PCI platform driver [ 1.207650] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.207655] ohci-pci: OHCI PCI platform driver [ 1.207680] ohci-platform: OHCI generic platform driver [ 1.211200] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 1.212617] tegra-xusb 3530000.xhci: extcon 0: ffffffc0efaf2400 id [ 1.213280] usbcore: registered new interface driver uas [ 1.213318] usbcore: registered new interface driver usb-storage [ 1.213381] usbcore: registered new interface driver usbserial [ 1.215230] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 1.215326] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.215343] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 1.216082] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 1.216110] tegra-xusb 3530000.xhci: irq 68, io mem 0x03530000 [ 1.216243] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.216248] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.216252] usb usb1: Product: xHCI Host Controller [ 1.216255] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.216258] usb usb1: SerialNumber: 3530000.xhci [ 1.216378] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.216625] hub 1-0:1.0: USB hub found [ 1.216653] hub 1-0:1.0: 4 ports detected [ 1.217000] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.217008] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 1.217141] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.217145] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.217149] usb usb2: Product: xHCI Host Controller [ 1.217152] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.217155] usb usb2: SerialNumber: 3530000.xhci [ 1.217420] tegra-xudc-new 3550000.xudc: USB charger detection disabled [ 1.217428] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.217464] hub 2-0:1.0: USB hub found [ 1.217489] hub 2-0:1.0: 3 ports detected [ 1.217777] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.218009] mousedev: PS/2 mouse device common for all mice [ 1.218066] usbcore: registered new interface driver xpad [ 1.218320] Wake76 for irq=199 [ 1.218322] Wake77 for irq=199 [ 1.218324] Wake78 for irq=199 [ 1.218327] Wake79 for irq=199 [ 1.218328] Wake80 for irq=199 [ 1.218330] Wake81 for irq=199 [ 1.218332] Wake82 for irq=199 [ 1.218361] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 1.218366] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 1.218435] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.292080] ata1: SATA link down (SStatus 0 SControl 300) [ 1.321804] usb usb2: usb_suspend_both: status 0 [ 1.347155] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.348189] Wake73 for irq=42 [ 1.349422] rtc rtc1: alarm rtc device [ 1.349433] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.349447] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.349619] i2c /dev entries driver [ 1.351080] i2c i2c-2: Added multiplexed i2c bus 9 [ 1.351362] i2c i2c-2: Added multiplexed i2c bus 10 [ 1.351367] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 1.352142] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.356144] parse_throttle_dt_data: Num cap clks = 4 [ 1.356149] parse_throttle_dt_data: clk=mcpu type=1 [ 1.356152] parse_throttle_dt_data: clk=bcpu type=2 [ 1.356159] parse_throttle_dt_data: clk=gpu type=4 [ 1.356161] parse_throttle_dt_data: clk=emc type=3 [ 1.357010] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.357516] FAN dev name: pwm-fan [ 1.357569] FAN:gpio request success. [ 1.357577] FAN: can't find tach_gpio [ 1.357585] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 1.357605] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 1.358403] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 1.359300] device-mapper: uevent: version 1.0.3 [ 1.359671] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.359921] CPU EMC frequency mapping table: from device tree [ 1.361803] cpufreq: platform driver Initialization: pass [ 1.362350] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.362470] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.363269] sdhci: Secure Digital Host Controller Interface driver [ 1.363271] sdhci: Copyright(c) Pierre Ossman [ 1.363273] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.364281] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.365845] CMDQ: cmdq_platfm_init successful [ 1.366688] CQE: CMD_TIMING bit set for R1B DCMD [ 1.368979] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.371810] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 287 [ 1.371921] sdhci-tegra 3440000.sdhci: Failed getting OCR mask: 0 [ 1.375608] tegra-se-nvhost 15810000.se: initialized [ 1.376635] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.377083] tegra-se-nvhost 15820000.se: initialized [ 1.378060] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.378514] tegra-se-nvhost 15830000.se: initialized [ 1.379289] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.379732] tegra-se-nvhost 15840000.se: initialized [ 1.380610] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.381301] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.381453] hidraw: raw HID events driver (C) Jiri Kosina [ 1.382582] usbcore: registered new interface driver usbhid [ 1.382585] usbhid: USB HID core driver [ 1.387324] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.388964] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.389167] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.389287] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00 [ 1.390029] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80 [ 1.390106] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480 [ 1.390158] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80 [ 1.390207] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180 [ 1.390347] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9180-0xb200 TX[1x8192]=0xb200-0xd280 [ 1.390671] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (48) [ 1.390674] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.391172] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 1.392725] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.393117] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.393543] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.393874] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.394608] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.394611] tegra18-bridge 2390000.axi2apb: enabled timeout = 9894000 [ 1.394613] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.394658] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.394660] tegra18-bridge 23a0000.axi2apb: enabled timeout = 9894000 [ 1.394662] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.394703] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.394705] tegra18-bridge 23b0000.axi2apb: enabled timeout = 9894000 [ 1.394707] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.394756] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.394759] tegra18-bridge 23c0000.axi2apb: enabled timeout = 9894000 [ 1.394761] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.394801] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.394803] tegra18-bridge 23d0000.axi2apb: enabled timeout = 9894000 [ 1.394805] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.394845] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.394850] tegra18-bridge 2100000.axip2p: enabled timeout = 9894000 [ 1.394852] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.394895] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.394900] tegra18-bridge 2110000.axip2p: enabled timeout = 9894000 [ 1.394902] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.394941] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.394945] tegra18-bridge 2120000.axip2p: enabled timeout = 9894000 [ 1.394947] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.394991] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.394996] tegra18-bridge 2130000.axip2p: enabled timeout = 9894000 [ 1.394998] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.395037] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.395039] tegra18-bridge 2140000.axip2p: enabled timeout = 9894000 [ 1.395041] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.395082] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.395088] tegra18-bridge 2150000.axip2p: enabled timeout = 9894000 [ 1.395090] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.395130] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.395135] tegra18-bridge 2160000.axip2p: enabled timeout = 9894000 [ 1.395137] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.395178] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.395183] tegra18-bridge 2170000.axip2p: enabled timeout = 9894000 [ 1.395185] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.395224] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.395230] tegra18-bridge 2180000.axip2p: enabled timeout = 9894000 [ 1.395232] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.395271] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.395276] tegra18-bridge 2190000.axip2p: enabled timeout = 9894000 [ 1.395278] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.395332] **** A57 ECC: Enabled [ 1.395334] tegra18_a57_serr_init: on CPU 5 a A57 Core [ 1.395390] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.395746] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.396135] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.396246] denver_knobs_init:MTS_VERSION:53679346 [ 1.397912] nvpmodel: initialized successfully [ 1.398660] trusty-virtio trusty:virtio: initializing [ 1.398755] trusty_ipc virtio0: vring0: va(pa) ffffffc0ec18e000(0) qsz 32 notifyid 1 [ 1.398761] trusty_ipc virtio0: vring1: va(pa) ffffffc0ec19c000(0) qsz 32 notifyid 2 [ 1.398822] trusty-virtio trusty:virtio: initializing done [ 1.398905] trusty_ipc virtio0: is online [ 1.400018] usbcore: registered new interface driver snd-usb-audio [ 1.407641] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.407764] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.409709] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.421663] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.459564] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.464748] OPE platform probe [ 1.464814] OPE platform probe successful [ 1.473740] mmc0: periodic cache flush enabled [ 1.473748] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.474072] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.474172] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.474262] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.474348] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.478891] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 [ 1.516910] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.516984] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.517053] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.517119] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.517186] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.517252] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.517316] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.517389] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.517454] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.517520] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.517594] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 1.517683] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 1.517758] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 1.517825] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 1.517891] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 1.517959] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 1.518026] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 1.518092] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 1.518158] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 1.518223] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 1.537273] u32 classifier [ 1.537276] Actions configured [ 1.537334] Initializing XFRM netlink socket [ 1.537927] NET: Registered protocol family 10 [ 1.538590] NET: Registered protocol family 17 [ 1.538599] NET: Registered protocol family 15 [ 1.538656] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.538694] Bluetooth: RFCOMM socket layer initialized [ 1.538703] Bluetooth: RFCOMM ver 1.11 [ 1.538707] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.538711] Bluetooth: HIDP socket layer initialized [ 1.538725] 9pnet: Installing 9P2000 support [ 1.538757] Key type dns_resolver registered [ 1.539023] Registered cp15_barrier emulation handler [ 1.539035] Registered setend emulation handler [ 1.541665] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.542776] registered taskstats version 1 [ 1.545349] isp 15600000.isp: initialized [ 1.548596] nvcsi 150c0000.nvcsi: initialized [ 1.549571] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 1.552103] FAN dev name: pwm-fan [ 1.552149] FAN:gpio request success. [ 1.552190] FAN: can't find tach_gpio [ 1.552198] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 1.552214] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 1.552880] Wake83 for irq=51 [ 1.552959] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.553085] input: gpio-keys as /devices/gpio-keys/input/input2 [ 1.553456] FAN dev name: pwm-fan [ 1.553494] FAN:gpio request success. [ 1.553499] FAN: can't find tach_gpio [ 1.553505] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 1.553518] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 1.553537] tegra-vi4 15700000.vi: initialized [ 1.554537] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound [ 1.554623] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 1.555958] FAN dev name: pwm-fan [ 1.555997] FAN:gpio request success. [ 1.556003] FAN: can't find tach_gpio [ 1.556008] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 1.556025] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 1.570856] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 1.570861] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.570865] usb 1-2: Product: 4-Port USB 2.1 Hub [ 1.570868] usb 1-2: Manufacturer: Generic [ 1.571573] hub 1-2:1.0: USB hub found [ 1.572137] hub 1-2:1.0: 4 ports detected [ 1.573967] FAN dev name: pwm-fan [ 1.574005] FAN:gpio request success. [ 1.574010] FAN: can't find tach_gpio [ 1.574016] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 1.574030] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 1.586313] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:09 UTC (946688409) [ 1.587045] mmcblk mmc0:0001: Card claimed for testing. [ 1.604149] ata2: SATA link down (SStatus 0 SControl 300) [ 1.604295] bpmp: mounted debugfs mirror [ 1.605218] bwmgr: missing cdev-type property [ 1.609300] ALSA device list: [ 1.609303] #0: tegra-hda at 0x3518000 irq 381 [ 1.609305] #1: tegra-snd-t186ref-mobile-rt565x [ 1.611758] Freeing unused kernel memory: 8640K [ 1.635075] Root device found: mmcblk0p1 [ 1.636147] Found dev node: /dev/mmcblk0p1 [ 1.682082] usb 2-2: new SuperSpeed USB device number 2 using tegra-xusb [ 1.710648] usb 2-2: New USB device found, idVendor=0bda, idProduct=0411 [ 1.710653] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.710666] usb 2-2: Product: 4-Port USB 3.1 Hub [ 1.710669] usb 2-2: Manufacturer: Generic [ 1.713666] usb 1-2: usb_suspend_both: status 0 [ 1.716266] hub 2-2:1.0: USB hub found [ 1.717314] hub 2-2:1.0: 4 ports detected [ 1.722666] FAN dev name: pwm-fan [ 1.722713] FAN:gpio request success. [ 1.722719] FAN: can't find tach_gpio [ 1.722726] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 1.722745] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 1.757603] EXT4-fs (mmcblk0p1): recovery complete [ 1.758291] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.760121] Rootfs mounted over mmcblk0p1 [ 1.772228] Switching from initrd to actual rootfs [ 1.821662] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 1.843027] systemd[1]: System time before build time, advancing clock. [ 1.843281] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610 [ 1.843284] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.843287] usb 1-3: Product: USB2.0 Hub [ 1.844102] hub 1-3:1.0: USB hub found [ 1.844405] hub 1-3:1.0: 4 ports detected [ 1.847502] FAN dev name: pwm-fan [ 1.847547] FAN:gpio request success. [ 1.847553] FAN: can't find tach_gpio [ 1.847560] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 1.847575] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 1.861690] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.870350] cgroup: cgroup2: unknown option "nsdelegate" [ 1.877660] usb 2-2: usb_suspend_both: status 0 [ 1.877794] usb usb2: usb_suspend_both: status 0 [ 1.884742] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.885455] systemd[1]: Detected architecture arm64. [ 1.903228] systemd[1]: Set hostname to . [ 1.983632] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 1.983641] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 1.989667] usb 1-3: usb_suspend_both: status 0 [ 1.989747] usb usb1: usb_suspend_both: status 0 [ 2.057823] FAN rising trip_level:1 cur_temp:46200 trip_temps[2]:60000 [ 2.090338] random: systemd: uninitialized urandom read (16 bytes read) [ 2.090518] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.090629] random: systemd: uninitialized urandom read (16 bytes read) [ 2.091956] systemd[1]: Created slice User and Session Slice. [ 2.092012] random: systemd: uninitialized urandom read (16 bytes read) [ 2.092610] systemd[1]: Created slice System Slice. [ 2.092827] systemd[1]: Listening on udev Control Socket. [ 2.093498] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 2.123255] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.190513] FAN dev name: pwm-fan [ 2.190560] FAN:gpio request success. [ 2.190566] FAN: can't find tach_gpio [ 2.190574] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.190592] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.368213] systemd-journald[2258]: Received request to flush runtime journal from PID 1 [ 2.854969] using random self ethernet address [ 2.859614] using random host ethernet address [ 3.240578] random: crng init done [ 3.243987] random: 7 urandom warning(s) missed due to ratelimiting [ 3.569482] Mass Storage Function, version: 2009/09/11 [ 3.569489] LUN: removable file: (no medium) [ 3.582525] using random self ethernet address [ 3.589605] using random host ethernet address [ 3.624943] rndis0: HOST MAC a2:4d:2a:34:8f:7c [ 3.625183] rndis0: MAC a2:4d:2a:34:8f:7d [ 3.627099] usb0: HOST MAC a2:4d:2a:34:8f:7e [ 3.627129] usb0: MAC a2:4d:2a:34:8f:7f [ 3.627147] tegra-xudc-new 3550000.xudc: exiting ELPG [ 3.632637] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 3.632661] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 3.632692] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.633405] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.633419] tegra-xudc-new 3550000.xudc: exiting ELPG [ 3.634617] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 3.634631] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.635207] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.641870] l4tbr0: port 1(rndis0) entered blocking state [ 3.641874] l4tbr0: port 1(rndis0) entered disabled state [ 3.642373] device rndis0 entered promiscuous mode [ 3.658887] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 3.667840] l4tbr0: port 2(usb0) entered blocking state [ 3.667844] l4tbr0: port 2(usb0) entered disabled state [ 3.673112] device usb0 entered promiscuous mode [ 3.684166] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 3.945694] tegra-xusb 3530000.xhci: entering ELPG [ 3.950291] tegra-xusb 3530000.xhci: entering ELPG done [ 4.127046] zram: Added device: zram0 [ 4.131177] zram: Added device: zram1 [ 4.135091] zram: Added device: zram2 [ 4.138898] zram: Added device: zram3 [ 4.143027] zram: Added device: zram4 [ 4.147207] zram: Added device: zram5 [ 4.190208] zram0: detected capacity change from 0 to 334966784 [ 4.228706] Adding 327112k swap on /dev/zram0. Priority:5 extents:1 across:327112k SS [ 4.239627] zram1: detected capacity change from 0 to 334966784 [ 4.264261] Adding 327112k swap on /dev/zram1. Priority:5 extents:1 across:327112k SS [ 4.267852] zram2: detected capacity change from 0 to 334966784 [ 4.283954] Adding 327112k swap on /dev/zram2. Priority:5 extents:1 across:327112k SS [ 4.292342] zram3: detected capacity change from 0 to 334966784 [ 4.325953] Adding 327112k swap on /dev/zram3. Priority:5 extents:1 across:327112k SS [ 4.328947] zram4: detected capacity change from 0 to 334966784 [ 4.380031] Adding 327112k swap on /dev/zram4. Priority:5 extents:1 across:327112k SS [ 4.391899] zram5: detected capacity change from 0 to 334966784 [ 4.419206] Adding 327112k swap on /dev/zram5. Priority:5 extents:1 across:327112k SS [ 4.771524] Bridge firewalling registered [ 4.808389] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.165278] bcpu-throttle-alert cooling device registered. [ 5.165497] mcpu-throttle-alert cooling device registered. [ 5.165829] gpu-throttle-alert cooling device registered. [ 5.166017] FAN dev name: pwm-fan [ 5.166083] FAN:gpio request success. [ 5.166094] FAN: can't find tach_gpio [ 5.166107] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 5.166133] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 5.166970] FAN dev name: pwm-fan [ 5.167031] FAN:gpio request success. [ 5.167039] FAN: can't find tach_gpio [ 5.167047] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 5.167067] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 5.294437] Netfilter messages via NETLINK v0.30. [ 5.296559] ctnetlink v0.93: registering with nfnetlink. [ 5.608849] EXT4-fs (mmcblk0p33): recovery complete [ 5.609626] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: (null) [ 5.623780] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 5.642738] EXT4-fs (mmcblk0p34): recovery complete [ 5.642750] EXT4-fs (mmcblk0p34): mounted filesystem with ordered data mode. Opts: (null) [ 5.677043] EXT4-fs (nvme0n1p1): recovery complete [ 5.677056] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 6.116929] tegradc 15200000.nvdisplay: blank - powerdown [ 6.116947] tegradc 15210000.nvdisplay: blank - powerdown [ 8.142513] tegra-i2c 3160000.i2c: no acknowledge from address 0x51 [ 8.582703] gpio tegra-gpio-aon wake51 for gpio=47(AA:7) [ 8.587950] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.867357] tegra-i2c 3160000.i2c: no acknowledge from address 0x0 [ 8.870140] tegra-i2c 3160000.i2c: no acknowledge from address 0x64 [ 8.870295] tegra-i2c 3160000.i2c: no acknowledge from address 0x64 [ 8.871876] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 8.879644] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 8.890039] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 8.900402] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 8.910781] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 8.918493] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 8.926200] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 8.933913] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 8.941674] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 8.949369] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 8.957074] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 8.967437] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 8.977885] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 8.983534] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 8.986037] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 8.988439] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 8.990834] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 8.993227] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 8.995620] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 8.998018] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.000419] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.002819] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.005214] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.007820] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.010235] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.017493] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 9.026075] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.028451] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.030824] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.033200] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.035582] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.042806] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 9.053240] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 9.063606] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 9.073973] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 9.079502] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.082425] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.084809] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.087187] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.094421] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 9.103039] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.105412] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.107794] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.110165] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.112539] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.114910] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.122140] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 9.132555] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 9.142961] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 9.153366] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 9.158893] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.161264] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.163647] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.166030] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.173280] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 9.181874] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.184246] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.186626] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.189012] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.191395] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.193773] tegra-i2c c240000.i2c: no acknowledge from address 0x64 [ 9.201015] tegra-i2c c240000.i2c: no acknowledge from address 0x0 [ 9.211652] tegra_wdt_t18x 30c0000.watchdog: Watchdog(0): wdt timeout set to 120 sec [ 9.392451] nvmap_alloc_handle: PID 5847: anfang_app: WARNING: All NvMap Allocations must have a tag to identify the subsystem allocating memory.Please pass the tag to the API call NvRmMemHanldeAllocAttr() or relevant. [ 31.817817] vdd-3v3-disp-cvb: disabling [ 31.817822] vdd-3v3-cvb: disabling [ 31.817826] vdd-1v8-cvb: disabling [ 31.817828] vdd-fan: disabling [ 31.817832] vdd_sys_en: disabling [ 31.817841] spmic-ldo1: disabling [ 31.818012] vddio-sdmmc1: disabling [ 31.818147] vdd-sys-bl: disabling [ 57.940831] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 57.942316] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready