[0000.284] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobi le-1b8ce67c) [0000.292] I> bit @ 0xd480000 [0000.295] I> Boot-device: eMMC [0000.299] I> sdmmc bdev is already initialized [0000.304] I> pmic: reset reason (nverc) : 0x40 [0000.310] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0000.317] I> Found 31 partitions in SDMMC_USER (instance 3) [0000.323] I> A/B: bin_type (16) slot 0 [0000.327] I> Loading partition bpmp-fw at 0xd7800000 [0000.332] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.337] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.352] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.358] I> A/B: bin_type (17) slot 0 [0000.361] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.367] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.372] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.387] I> Binary(17) of size 465840 is loaded @ 0xd798e200 [0000.566] I> Loading SCE-FW ... [0000.569] I> A/B: bin_type (12) slot 0 [0000.573] I> Loading partition sce-fw at 0xd7300000 [0000.578] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.583] I> Addr: 0xd7300000, start-block: 58782024, num_blocks: 1 [0000.594] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.599] I> Init SCE [0000.602] I> Loading APE-FW ... [0000.605] I> A/B: bin_type (11) slot 0 [0000.608] I> Loading partition adsp-fw at 0xd7400000 [0000.613] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.619] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.629] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.635] I> Copy BTCM section [0000.638] I> A/B: bin_type (13) slot 0 [0000.641] I> Loading partition cpu-bootloader at 0x96000000 [0000.647] I> Reading two headers - addr:0x96000000 blocks:1 [0000.652] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.664] I> Binary(13) of size 277776 is loaded @ 0x96000000 [0000.670] I> A/B: bin_type (20) slot 0 [0000.674] I> Loading partition bootloader-dtb at 0x8520f400 [0000.679] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.685] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.700] I> Binary(20) of size 344048 is loaded @ 0x8520f400 [0000.705] I> A/B: bin_type (14) slot 0 [0000.709] I> Loading partition secure-os at 0x8530f600 [0000.714] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.720] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.732] I> Binary(14) of size 312752 is loaded @ 0x8530f600 [0000.740] I> TOS boot-params @ 0x85000000 [0000.744] I> TOS params prepared [0000.747] I> Loading EKS ... [0000.750] I> A/B: bin_type (15) slot 0 [0000.753] I> Loading partition eks at 0x8590f800 [0000.758] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.763] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0000.772] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.777] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.782] I> Copied encrypted keys [0000.786] I> boot profiler @ 0x275844000 [0000.790] I> boot profiler for TOS @ 0x275844000 [0000.795] I> Unhalting SCE [0000.797] I> Primary Memory Start:80000000 Size:70000000 [0000.802] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.809] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):a28d87f09 NOTICE: BL31: Built : 21:15:42, Aug 12 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea87ad58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete [0001.170] I> Welcome to Cboot [0001.172] I> Cboot Version: t186-dcb303f9 [0001.176] I> CPU-BL Params @ 0x275800000 [0001.180] I> 0) Base:0x00000000 Size:0x00000000 [0001.184] I> 1) Base:0x277f00000 Size:0x00100000 [0001.189] I> 2) Base:0x277e00000 Size:0x00100000 [0001.193] I> 3) Base:0x277d00000 Size:0x00100000 [0001.198] I> 4) Base:0x277c00000 Size:0x00100000 [0001.203] I> 5) Base:0x277b00000 Size:0x00100000 [0001.207] I> 6) Base:0x277800000 Size:0x00200000 [0001.212] I> 7) Base:0x277400000 Size:0x00400000 [0001.216] I> 8) Base:0x277a00000 Size:0x00100000 [0001.221] I> 9) Base:0x277300000 Size:0x00100000 [0001.225] I> 10) Base:0x276800000 Size:0x00800000 [0001.230] I> 11) Base:0x30000000 Size:0x00040000 [0001.234] I> 12) Base:0xf0000000 Size:0x00100000 [0001.238] I> 13) Base:0x30040000 Size:0x00001000 [0001.243] I> 14) Base:0x30048000 Size:0x00001000 [0001.247] I> 15) Base:0x30049000 Size:0x00001000 [0001.252] I> 16) Base:0x3004a000 Size:0x00001000 [0001.256] I> 17) Base:0x3004b000 Size:0x00001000 [0001.261] I> 18) Base:0x3004c000 Size:0x00001000 [0001.265] I> 19) Base:0x3004d000 Size:0x00001000 [0001.269] I> 20) Base:0x3004e000 Size:0x00001000 [0001.274] I> 21) Base:0x3004f000 Size:0x00001000 [0001.278] I> 22) Base:0x00000000 Size:0x00000000 [0001.283] I> 23) Base:0xf0100000 Size:0x00010000 [0001.287] I> 24) Base:0x00000000 Size:0x00000000 [0001.292] I> 25) Base:0x00000000 Size:0x00000000 [0001.296] I> 26) Base:0x00000000 Size:0x00000000 [0001.301] I> 27) Base:0x00000000 Size:0x00000000 [0001.305] I> 28) Base:0x84400000 Size:0x00400000 [0001.309] I> 29) Base:0x30000000 Size:0x00010000 [0001.314] I> 30) Base:0x278000000 Size:0x08000000 [0001.318] I> 31) Base:0x00000000 Size:0x00000000 [0001.323] I> 32) Base:0x276000000 Size:0x00600000 [0001.327] I> 33) Base:0x80000000 Size:0x70000000 [0001.332] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.336] I> 35) Base:0x00000000 Size:0x00000000 [0001.341] I> 36) Base:0x00000000 Size:0x00000000 [0001.345] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.350] I> 38) Base:0x84000000 Size:0x00400000 [0001.354] I> 39) Base:0x96000000 Size:0x02000000 [0001.358] I> 40) Base:0x85000000 Size:0x01200000 [0001.363] I> 41) Base:0x275800000 Size:0x00500000 [0001.367] I> 42) Base:0x00000000 Size:0x00000000 [0001.372] I> 43) Base:0x00000000 Size:0x00000000 [0001.376] GIC-SPI Target CPU: 4 [0001.380] Interrupts Init done [0001.383] calling constructors [0001.386] initializing heap [0001.389] initializing threads [0001.392] initializing timers [0001.395] creating bootstrap completion thread [0001.400] top of bootstrap2() [0001.403] CPU: ARM Cortex A57 [0001.406] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.411] initializing platform [0001.414] I> Boot-device: eMMC [0001.419] I> sdmmc bdev is already initialized [0001.425] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0001.435] I> Found 31 partitions in SDMMC_USER (instance 3) [0001.440] W> opt-in fuse is not set, skip fuse_burning [0001.445] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.451] W> No valid slot number is found in scratch register [0001.457] W> Return default slot: _a [0001.460] I> A/B: bin_type (21) slot 0 [0001.464] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.478] I> Kernel_dtb @0x80000000 [0001.482] I> Bl_dtb @0x8520f400 [0001.485] I> gpio framework initialized [0001.491] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driv er [0001.500] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.508] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.516] E> I2C: slave not found in slaves. [0001.520] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start fa lse. [0001.528] E> I2C_DEV: Failed to send register address 0x00000004. [0001.534] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x 00000004 via instance 0. [0001.543] E> tca9539_device_init: failed to write polar reg [0001.549] E> tegrabl_tca9539_init: failed to init device! [0001.554] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.561] E> I2C: slave not found in slaves. [0001.565] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start fa lse. [0001.573] E> I2C_DEV: Failed to send register address 0x00000004. [0001.579] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x 00000004 via instance 0. [0001.588] E> tca9539_device_init: failed to write polar reg [0001.593] E> tegrabl_tca9539_init: failed to init device! [0001.601] I> fixed regulator driver initialized [0001.632] I> register 'maxim' power off handle [0001.638] I> virtual i2c enabled [0001.641] I> registered 'maxim,max77620' pmic [0001.646] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.659] I> Find /i2c@c250000's alias i2c7 [0001.663] I> Reading eeprom i2c=7 address=0x50 [0001.692] I> Device at /i2c@c250000:0x50 [0001.696] I> Reading eeprom i2c=7 address=0x57 [0001.724] I> Device at /i2c@c250000:0x57 [0001.729] I> Find /i2c@c240000's alias i2c1 [0001.733] I> Reading eeprom i2c=1 address=0x51 [0001.738] E> I2C: slave not found in slaves. [0001.742] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start tr ue. [0001.750] E> I2C_DEV: Failed to send register address 0x00000000. [0001.756] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.765] E> eeprom: Retry to read I2C slave device. [0001.770] E> I2C: slave not found in slaves. [0001.774] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start tr ue. [0001.782] E> I2C_DEV: Failed to send register address 0x00000000. [0001.788] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.797] E> eeprom: Failed to read I2C slave device [0001.802] I> Eeprom read failed 0x3526070d [0001.807] I> Find /i2c@3160000's alias i2c0 [0001.811] I> Reading eeprom i2c=0 address=0x50 [0001.815] E> I2C: slave not found in slaves. [0001.819] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start tr ue. [0001.827] E> I2C_DEV: Failed to send register address 0x00000000. [0001.833] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.842] E> eeprom: Failed to read I2C slave device [0001.847] I> Eeprom read failed 0x3526070d [0001.852] I> Find /i2c@3180000's alias i2c2 [0001.856] I> Reading eeprom i2c=2 address=0x54 [0001.860] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.865] C> GPIO driver for chip_id 0x2 could not be found [0001.870] E> cam_eeprom_read: Can't get gpio driver [0001.875] I> Eeprom read failed 0x4d4d000d [0001.879] I> Reading eeprom i2c=2 address=0x57 [0001.883] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.888] C> GPIO driver for chip_id 0x2 could not be found [0001.893] E> cam_eeprom_read: Can't get gpio driver [0001.898] I> Eeprom read failed 0x4d4d000d [0001.902] I> create_pm_ids: id: 3310-1000-D00-J, len: 15 [0001.907] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00 ,touch-config:00,display-config:00,, len: 93 [0001.918] I> create_pm_ids: id: XXXX-XXXX-XXX-X, len: 15 [0001.923] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff ,touch-config:ff,display-config:ff,, len: 93 [0001.955] I> enabling 'vdd-hdmi' regulator [0001.959] E> tegrabl_display_get_pdata, failed to parse dtb settings [0001.968] E> cannot find any other nvdisp nodes [0001.972] E> no valid display unit config found in dtb [0001.978] W> display init failed [0001.981] initializing target [0001.984] calling apps_init() [0001.987] starting app kernel_boot_app [0001.998] I> found decompressor handler: lz4-legacy [0002.002] I> decompressing BMP blob ... [0002.012] I> Kernel type = Normal [0002.016] I> Loading kernel from partition ... [0002.020] W> No valid slot number is found in scratch register [0002.025] W> Return default slot: _a [0002.029] I> A/B: bin_type (24) slot 0 [0002.038] I> Boot image size read from image header: f2d10 [0002.043] I> Boot image load address: 0x0x80400000 [0002.048] I> Loading partition kernel at 0x80400000 from device(0x1) [0002.799] I> Kernel hdr @0x80400000 [0002.802] I> Kernel dtb @0x80000000 [0002.805] I> T18x: Authenticate boot.img (bin_type 24), max size 0x4000000 [0002.813] I> T18x: Authenticate tegra194-p2888-0001-p2822-0000.dtb (bin_type 21 ), max size 0x100000 [0002.823] I> Checking boot.img header magic ... [0002.827] I> [OK] [0002.829] I> Valid boot.img @ 0x80400000 [0002.832] I> decompressor handler not found [0002.836] I> Copying kernel image (477378 bytes) from 0x80400800 to 0x80800000 ... [0002.844] I> Done [0002.846] I> Move ramdisk (len: 0) from 0x80475800 to 0x94830000 [0002.853] I> Updated bpmp info to DTB [0002.858] I> Ramdisk: Base: 0x94830000; Size: 0x0 [0002.862] I> Updated initrd info to DTB [0002.866] W> WARN: Fail to override "console=none" in commandline [0002.872] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display param s [0002.879] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display param s [0002.886] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display param s [0002.893] I> disabled_core_mask: 0xffffff0c [0002.897] W> No valid slot number is found in scratch register [0002.903] W> Return default slot: _a [0002.906] I> Active slot suffix: [0002.910] I> add_boot_slot_suffix: slot_suffix = [0002.914] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 con sole=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_cons ole_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 g pt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boo t.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_b oot_part_access=1 [0002.951] I> Updated bootarg info to DTB [0002.954] I> eeprom_get_mac_addr: MAC (type: 0): 48:b0:2d:0d:ea:75 [0002.960] I> eeprom_get_mac_addr: MAC (type: 1): 48:b0:2d:0d:ea:76 [0002.967] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:0d:ea:77 [0002.975] E> Found no plugin manager ids in source DT [0002.979] W> Add plugin manager ids from board info [0002.984] E> "plugin-manager" doesn't exist, creating [0002.989] E> "ids" doesn't exist, creating [0002.993] E> "connection" doesn't exist, creating [0002.998] E> "configs" doesn't exist, creating [0003.002] I> create_pm_ids: id: 3310-1000-D00-J, len: 15 [0003.007] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00 ,touch-config:00,display-config:00,, len: 93 [0003.018] I> create_pm_ids: id: XXXX-XXXX-XXX-X, len: 15 [0003.023] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff ,touch-config:ff,display-config:ff,, len: 93 [0003.034] I> Adding plugin-manager/ids/3310-1000-D00=/i2c@c250000:module@0x50 [0003.041] E> "i2c@c250000" doesn't exist, creating [0003.046] E> "module@0x50" doesn't exist, creating [0003.051] I> Adding plugin-manager/ids/XXXX-XXXX-XXX=/i2c@c250000:module@0x57 [0003.058] E> "module@0x57" doesn't exist, creating [0003.064] I> Adding plugin-manager/ids/3310-1000-D00-J [0003.070] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.076] I> Adding plugin-manager/configs/3310-power-config 00 [0003.082] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.088] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.093] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.099] I> Adding plugin-manager/configs/3310-display-config 00 [0003.105] I> Adding plugin-manager/cvm [0003.109] E> "chip-id" doesn't exist, creating [0003.114] I> Adding plugin-manager/chip-id/A02P [0003.118] E> "odm-data" doesn't exist, creating [0003.123] I> Adding /chosen/plugin-manager/odm-data [0003.131] I> added [base:0x80000000, size:0x70000000] to /memory [0003.137] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.143] I> added [base:0x275e00000, size:0x200000] to /memory [0003.149] I> added [base:0x276600000, size:0x200000] to /memory [0003.154] I> added [base:0x277000000, size:0x200000] to /memory [0003.160] I> Updated memory info to DTB [0003.164] E> add_disp_param: failed to get display params for du=0 [0003.171] E> "reset" doesn't exist, creating [0003.176] E> "pmc-reset-reason" doesn't exist, creating [0003.181] E> "pmic-reset-reason" doesn't exist, creating [0003.187] I> Adding ecid(00000001646593c50000000010fe0300) to DT [0003.193] I> disabled_core_mask: 0xffffff0c [0003.203] I> Add serial number:1421520023750 as DT property [0003.210] I> Plugin-manager override starting [0003.216] I> node /plugin-manager/fragement@0 matches [0003.224] I> node /plugin-manager/fragement@4 matches [0003.234] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.250] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.258] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.266] I> node /plugin-manager/fragment-devslp@0 matches [0003.276] I> node /plugin-manager/fragment-500-pcie-config matches [0003.287] I> node /plugin-manager/fragment-500-xusb-config matches [0003.304] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.315] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.323] I> node /plugin-manager/fragment-p3310-c01 matches [0003.331] I> node /plugin-manager/fragment-p3310-c03 matches [0003.352] I> Disable plugin-manager status in FDT [0003.356] I> Plugin-manager override finished successfully [0003.362] I> tegrabl_load_kernel_and_dtb: Done [0003.366] E> tegrabl_display_clear: display is not initialized [0003.371] W> Boot logo display failed... [0003.375] I> Kernel EP: 0x80800000, DTB: 0x80000000 U-Boot 2016.07-gd917e08cec (Aug 12 2019 - 21:16:16 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 237 bytes read in 118 ms (2 KiB/s) p2371-2180 eMMC boot options 1: primary kernel Enter choice: 1: primary kernel Retrieving file: /boot/initrd 5565090 bytes read in 184 ms (28.8 MiB/s) Retrieving file: /boot/Image 34048008 bytes read in 848 ms (38.3 MiB/s) append: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 c onsole=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlyco n=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme _first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.203 1647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 roo t=/dev/mmcblk0p1 rw rootwait net.ifnames=0 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000080000000, end 00000000800452a5 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (aqueti@Aqueti) (gcc version 6.4.1 20 170707 (Linaro GCC 6.4-2017.08) ) #3 SMP PREEMPT Tue Oct 22 14:43:47 EDT 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_c arveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_c arveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_c arveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_c arveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_c arveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_c arveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible i d nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f7021000 s61592 r8192 d326 16 u102400 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 2022968 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=e xt4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772 e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suff ix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_teg ra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29468(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 byte s) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7969976K/8220672K available (15102K kernel code, 2914K rw data, 6588K rodata, 8576K init, 609K bss, 185160K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 M B) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 G B) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f40000 ( 15104 K B) [ 0.000000] .rodata : 0xffffff8008f40000 - 0xffffff80095c0000 ( 6656 K B) [ 0.000000] .init : 0xffffff80095c0000 - 0xffffff8009e20000 ( 8576 K B) [ 0.000000] .data : 0xffffff8009e20000 - 0xffffff800a0f8808 ( 2915 K B) [ 0.000000] .bss : 0xffffff800a0f8808 - 0xffffff800a190d3c ( 610 K B) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 K B) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 M B) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 G B maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 M B actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 M B) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (ph ys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 43980 46511088ns [ 0.009488] Console: colour dummy device 80x25 [ 0.014150] console [tty0] enabled [ 0.017708] bootconsole [uart8250] disabled [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (aqueti@Aqueti) (gcc version 6.4.1 20 170707 (Linaro GCC 6.4-2017.08) ) #3 SMP PREEMPT Tue Oct 22 14:43:47 EDT 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_c arveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_c arveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_c arveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_c arveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_c arveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_c arveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible i d nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f7021000 s61592 r8192 d326 16 u102400 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 2022968 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=e xt4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772 e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suff ix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_teg ra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29468(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 byte s) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7969976K/8220672K available (15102K kernel code, 2914K rw data, 6588K rodata, 8576K init, 609K bss, 185160K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 M B) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 G B) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f40000 ( 15104 K B) [ 0.000000] .rodata : 0xffffff8008f40000 - 0xffffff80095c0000 ( 6656 K B) [ 0.000000] .init : 0xffffff80095c0000 - 0xffffff8009e20000 ( 8576 K B) [ 0.000000] .data : 0xffffff8009e20000 - 0xffffff800a0f8808 ( 2915 K B) [ 0.000000] .bss : 0xffffff800a0f8808 - 0xffffff800a190d3c ( 610 K B) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 K B) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 M B) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 G B maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 M B actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 M B) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (ph ys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 43980 46511088ns [ 0.009488] Console: colour dummy device 80x25 [ 0.014150] console [tty0] enabled [ 0.017708] bootconsole [uart8250] disabled [ 0.022084] kmemleak: Kernel memory leak detector disabled [ 0.022101] Calibrating delay loop (skipped), value calculated using timer fr equency.. 62.50 BogoMIPS (lpj=125000) [ 0.022115] pid_max: default: 32768 minimum: 301 [ 0.022433] Security Framework initialized [ 0.022596] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022608] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 byte s) [ 0.023207] ftrace: allocating 46921 entries in 184 pages [ 0.147590] sched-energy: Sched-energy-costs installed from DT [ 0.147611] ASID allocator initialised with 65536 entries [ 0.181919] tegra-id: chipid=21817. [ 0.181935] tegra-id: opt_subrevision=1. [ 0.181958] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.181971] DTS File Name: /home/sjx/32.5.0_code/code/kernel/kernel-4.9/arch/ arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/ tegra186-quill-p3310-1000-c03-00-base.dts [ 0.181989] DTB Build time: Nov 19 2021 00:04:33 [ 0.229971] CPU1: Booted secondary processor [4e0f0030] [ 0.261612] CPU2: Booted secondary processor [4e0f0030] [ 0.293392] CPU3: Booted secondary processor [411fd073] [ 0.325384] CPU4: Booted secondary processor [411fd073] [ 0.357378] CPU5: Booted secondary processor [411fd073] [ 0.357438] Brought up 6 CPUs [ 0.357484] SMP: Total of 6 processors activated. [ 0.357498] CPU features: detected feature: 32-bit EL0 Support [ 0.358259] CPU: All CPU(s) started at EL2 [ 0.358318] alternatives: patching kernel code [ 0.367466] devtmpfs: initialized [ 0.393245] Initilizing CustomIPI irq domain [ 0.393432] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 7645041785100000 ns [ 0.393460] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.394346] pinctrl core: initialized pinctrl subsystem [ 0.394555] OS set in device tree is not L4T. [ 0.394718] regulator-dummy: no parameters [ 0.394869] Initializing plugin-manager [ 0.394932] Plugin module not found [ 0.394978] Plugin-manager status disabled [ 0.396218] NET: Registered protocol family 16 [ 0.396914] pstore: using zlib compression [ 0.397340] console [pstore-1] enabled [ 0.397353] pstore: Registered ramoops as persistent store backend [ 0.397368] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.416996] cpuidle: using governor menu [ 0.418059] bpmp: waiting for handshake [ 0.418076] bpmp: handshake completed [ 0.418100] bpmp: synchronizing channels [ 0.418117] bpmp: channels synchronized [ 0.418130] bpmp: mail init ok [ 0.419818] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.419839] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.419855] arm-smmu 12000000.iommu: stage 1 translation [ 0.419870] arm-smmu 12000000.iommu: stage 2 translation [ 0.419884] arm-smmu 12000000.iommu: nested translation [ 0.419901] arm-smmu 12000000.iommu: stream matching with 128 registe r groups, mask 0x7f80 [ 0.419923] arm-smmu 12000000.iommu: SMMU address space size (0x800000) diffe rs from mapped region size (0x1000000)! [ 0.419944] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only ) [ 0.419960] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.419974] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.421788] vdso: 2 pages (1 code @ ffffff8008f47000, 1 data @ ffffff8009e240 00) [ 0.421820] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.424540] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomi c allocations [ 0.425660] Registering BPMP clocks... [ 0.425762] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.427616] tegra_powergate_init: DONE [ 0.427637] DTS File Name: /home/sjx/32.5.0_code/code/kernel/kernel-4.9/arch/ arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/ tegra186-quill-p3310-1000-c03-00-base.dts [ 0.427668] DTB Build time: Nov 19 2021 00:04:33 [ 0.429072] Tegra reboot handler registered. [ 0.430334] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.430414] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.430439] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.430453] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.430466] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.430625] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registere d [ 0.430653] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.430968] iommu: Adding device 3460000.sdhci to group 0 [ 0.431633] iommu: Adding device 3400000.sdhci to group 1 [ 0.432680] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.432712] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.433170] iommu: Adding device 3160000.i2c to group 3 [ 0.433590] iommu: Adding device c240000.i2c to group 4 [ 0.433921] iommu: Adding device 3180000.i2c to group 5 [ 0.434241] iommu: Adding device 3190000.i2c to group 6 [ 0.434654] iommu: Adding device 31b0000.i2c to group 7 [ 0.434975] iommu: Adding device 31c0000.i2c to group 8 [ 0.435293] iommu: Adding device c250000.i2c to group 9 [ 0.435614] iommu: Adding device 31e0000.i2c to group 10 [ 0.437118] iommu: Adding device 3210000.spi to group 11 [ 0.437456] iommu: Adding device c260000.spi to group 12 [ 0.437782] iommu: Adding device 3240000.spi to group 13 [ 0.438475] iommu: Adding device 3100000.serial to group 14 [ 0.438802] iommu: Adding device 3110000.serial to group 15 [ 0.439124] iommu: Adding device c280000.serial to group 16 [ 0.439449] iommu: Adding device 3130000.serial to group 17 [ 0.440739] iommu: Adding device 2490000.ether_qos to group 18 [ 0.440763] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.441656] iommu: Adding device b000000.rtcpu to group 19 [ 0.443632] iommu: Adding device 13e10000.host1x to group 20 [ 0.443937] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.444240] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.444550] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.444844] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.445181] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.445483] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.445794] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.446101] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.446551] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.447172] iommu: Adding device 15700000.vi to group 30 [ 0.447516] iommu: Adding device 15600000.isp to group 31 [ 0.447963] iommu: Adding device 15210000.nvdisplay to group 32 [ 0.448520] iommu: Adding device 15340000.vic to group 33 [ 0.448742] iommu: Adding device 154c0000.nvenc to group 34 [ 0.448962] iommu: Adding device 15480000.nvdec to group 35 [ 0.449332] iommu: Adding device 15380000.nvjpg to group 36 [ 0.449564] iommu: Adding device 15500000.tsec to group 37 [ 0.449782] iommu: Adding device 15100000.tsecb to group 38 [ 0.450435] iommu: Adding device 15810000.se to group 39 [ 0.450655] iommu: Adding device 15820000.se to group 40 [ 0.450865] iommu: Adding device 15830000.se to group 41 [ 0.451081] iommu: Adding device 15840000.se to group 42 [ 0.451911] iommu: Adding device smmu_test to group 43 [ 0.452504] mc: mapped MMIO address: 0xffffff800a680000 -> 0x2c10000 [ 0.452531] mc: mapped MMIO address: 0xffffff800a6a0000 -> 0x2c20000 [ 0.452552] mc: mapped MMIO address: 0xffffff800a6c0000 -> 0x2c30000 [ 0.452575] mc: mapped MMIO address: 0xffffff800a6e0000 -> 0x2c40000 [ 0.452597] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c50000 [ 0.452617] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.452640] mc-err: mcerr ops are set to t18x [ 0.452853] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.453934] iommu: Adding device 3530000.xhci to group 44 [ 0.453959] arm-smmu: forcing sodev map for 3530000.xhci [ 0.454396] iommu: Adding device 3550000.xudc to group 45 [ 0.454421] arm-smmu: forcing sodev map for 3550000.xudc [ 0.455129] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.455150] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.455768] iommu: Adding device 17000000.gp10b to group 46 [ 0.456767] tegra-reset 5000000.clock: registered 193 resets. [ 0.458862] iommu: Adding device d000000.bpmp to group 47 [ 0.459086] bpmp: ping status is 0 [ 0.459190] bpmp d000000.bpmp: firmware tag is 4208eb5c85fe47a2235fbc0b8eb87d ca [ 0.462610] bpmp d000000.bpmp: probe ok [ 0.467619] iommu: Adding device 2600000.dma to group 48 [ 0.469374] gpio gpiochip0: gpio-line-names specifies 180 line names but ther e are 192 lines on the chip [ 0.470996] GPIO line 424 (wifi-enable) hogged as output/high [ 0.471060] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.471120] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.471543] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpioch ip0 (tegra-gpio) [ 0.478614] gpio gpiochip1: gpio-line-names specifies 60 line names but there are 64 lines on the chip [ 0.478948] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.479334] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpioch ip1 (tegra-gpio-aon) [ 0.482064] iommu: Adding device 10003000.pcie-controller to group 49 [ 0.482124] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.482654] iommu: Adding device sound to group 50 [ 0.483138] iommu: Adding device 3510000.hda to group 51 [ 0.495185] iommu: Adding device c1a0000.aon to group 52 [ 0.495924] vdd-ac-bat: 5000 mV [ 0.499219] vdd-1v8-ap: 1800 mV [ 0.517632] random: fast init done [ 0.534919] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.540381] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.540902] SCSI subsystem initialized [ 0.541491] usbcore: registered new interface driver usbfs [ 0.541581] usbcore: registered new interface driver hub [ 0.541859] usbcore: registered new device driver usb [ 0.544782] tegra-i2c 3160000.i2c: no acknowledge from address 0x74 [ 0.544884] pca953x 0-0074: failed reading register [ 0.544985] pca953x: probe of 0-0074 failed with error -121 [ 0.555118] GPIO line 244 (lcd-bias-rails) hogged as output/high [ 0.555454] gpiochip_setup_dev: registered GPIOs 240 to 255 on device: gpioch ip2 (tca9539) [ 0.559157] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.565823] vddio-ddr: at 1125 mV [ 0.569648] avdd_dsi_csi: 1200 mV [ 0.573656] vdd-1v8: 1800 mV [ 0.577650] vdd-3v3-sys: 3300 mV [ 0.578998] spmic-ldo0: at 1800 mV [ 0.579879] spmic-ldo1: at 800 mV [ 0.585648] vddio-3v3: 3300 mV [ 0.586388] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.589680] vdd-rtc: at 800 mV [ 0.590569] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.593650] spmic-ldo6: at 1500 mV [ 0.597649] vdd-pex-1v00: 1000 mV [ 0.598434] dvdd-pex: 1000 mV [ 0.599090] GPIO line 237 (spmic_gpio_input) hogged as input [ 0.599324] GPIO line 238 (spmic_gpio_input) hogged as input [ 0.599655] gpiochip_setup_dev: registered GPIOs 232 to 239 on device: gpioch ip3 (max77620-gpio) [ 0.601995] max77620 4-003c: max77620 probe successful [ 0.602508] media: Linux media interface: v0.10 [ 0.602614] Linux video capture interface: v2.00 [ 0.607076] pps_core: LinuxPPS API ver. 1 registered [ 0.607128] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti [ 0.607209] PTP clock support registered [ 0.607948] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.608037] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.610961] tegra_fiq_debugger_init: found FIQ source (IRQ 387) [ 0.616134] trusty trusty: trusty version: Built: 21:17:07 Aug 12 2019 [ 0.616243] trusty trusty: selected api version: 3 (requested 3) [ 0.617401] Advanced Linux Sound Architecture Driver Initialized. [ 0.617955] Bluetooth: Core ver 2.22 [ 0.618030] NET: Registered protocol family 31 [ 0.618063] Bluetooth: HCI device and connection manager initialized [ 0.618104] Bluetooth: HCI socket layer initialized [ 0.618144] Bluetooth: L2CAP socket layer initialized [ 0.618218] Bluetooth: SCO socket layer initialized [ 0.619145] en-vdd-sd: 3300 mV [ 0.619857] en-vdd-cam: 1800 mV [ 0.620295] vdd-usb0-5v: 5000 mV [ 0.620669] vdd-usb1-5v: 5000 mV [ 0.621571] en-vdd-cam-1v2: 1200 mV [ 0.622259] vdd-fan: 5000 mV [ 0.622598] vdd-3v3: 3300 mV [ 0.622965] en-vdd-vcm-2v8: 2800 mV [ 0.623278] vdd-usb2-5v: 5000 mV [ 0.623637] vdd-sys-bl: 3300 mV [ 0.624288] en-vdd-sys: 1200 mV [ 0.627140] camchar: rtcpu character device driver loaded [ 0.627744] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.629772] extcon-gpio-states external-connection:extcon@1: Cable state:0, c able id:0 [ 0.631279] clocksource: Switched to clocksource arch_sys_counter [ 0.671310] VFS: Disk quotas dquot_6.6.0 [ 0.671571] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.672229] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.673271] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.673318] nvmap_page_pool_init: Total RAM pages: 2008878 [ 0.673354] nvmap_page_pool_init: nvmap page pool size: 251109 pages (980 MB) [ 0.673567] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.677233] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.689554] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.689893] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.690354] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.690499] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.690677] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.690889] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.691124] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.691507] la/ptsa driver initialized. [ 0.691547] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.691583] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.692755] NET: Registered protocol family 2 [ 0.694776] TCP established hash table entries: 65536 (order: 7, 524288 bytes ) [ 0.695606] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.696366] TCP: Hash tables configured (established 65536 bind 65536) [ 0.696446] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.696604] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.697489] NET: Registered protocol family 1 [ 0.698724] RPC: Registered named UNIX socket transport module. [ 0.698826] RPC: Registered udp transport module. [ 0.698855] RPC: Registered tcp transport module. [ 0.698888] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.699218] Trying to unpack rootfs image as initramfs... [ 0.890508] Freeing initrd memory: 5432K [ 0.910702] host1x 13e10000.host1x: initialized [ 0.912785] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters av ailable [ 0.917745] audit: initializing netlink subsys (disabled) [ 0.917821] audit: type=2000 audit(0.800:1): initialized [ 0.918744] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.931972] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.934575] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.936224] 9p: Installing v9fs 9p2000 file system support [ 0.942818] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 40) [ 0.943039] io scheduler noop registered [ 0.943717] io scheduler cfq registered (default) [ 0.948777] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.069400] iommu: Adding device aconnect@2a41000:adsp_audio to group 53 [ 1.109116] iommu: Adding device 2993000.adsp to group 54 [ 1.110327] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.113780] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detectio n enabled [ 1.118202] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.119769] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 1.121099] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 1.122470] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.125240] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 1.126332] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 1.126768] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lane s [ 1.127064] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:c amera_platform_driver probe [ 1.127304] misc tegra_camera_ctrl: tegra_camera_isomgr_register: some fields not in DT. [ 1.127369] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=0 , vi_iso_bw=4500000, max_bw=4500000 [ 1.129342] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lane s [ 1.130920] tsec 15500000.tsec: initialized [ 1.132616] tsec 15100000.tsecb: initialized [ 1.136064] nvdec 15480000.nvdec: initialized [ 1.142023] falcon 15340000.vic: initialized [ 1.143624] falcon 154c0000.nvenc: initialized [ 1.145091] falcon 15380000.nvjpg: initialized [ 1.149881] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.152170] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.153884] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.155507] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.157096] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.158643] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.160224] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.161758] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.165162] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.165202] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.165277] tegradccommon 15200000.dc_common: dma mapping done [ 1.167333] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor 1 [ 1.167495] generic_infoframe_type: 0x87 [ 1.167735] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.167828] tegradc 15210000.nvdisplay: Display dc.ffffff800b610000 registere d with id=0 [ 1.173235] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 1 6727000 KB/s [ 1.173262] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 1.173281] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 3 57620000 Hz [ 1.173477] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 1.173495] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 1.174351] tegradc 15210000.nvdisplay: dc_hdmi_hotplug_init: couldn't get re gulator vdd_hdmi_5v0, -517 [ 1.180699] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdm i_board [ 1.180727] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.186472] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 chann els [ 1.187156] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initia lized [ 1.187725] kfuse 3830000.kfuse: initialized [ 1.189266] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.194802] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.198706] console [ttyS0] disabled [ 1.198812] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25 500000) is a Tegra [ 1.220451] tegradc 15210000.nvdisplay: probed [ 1.554697] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.963015] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.369504] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.371567] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.776612] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.184197] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.478793] console [ttyS0] enabled [ 3.479575] Console: switching to colour frame buffer device 240x67 [ 3.480775] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 3.482164] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 3.482513] serial-tegra 3130000.serial: RX in PIO mode [ 3.483521] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 3.488919] [drm] Initialized [ 3.517384] brd: module loaded [ 3.524658] loop: module loaded [ 3.524760] tegra_profiler: version: 1.134, samples/io: 47/26 [ 3.524883] tegra_profiler: auth: init [ 3.527815] nct1008_nct72 7-004c: starting parse dt [ 3.527897] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 3.527902] nct1008_nct72 7-004c: success parsing dt [ 3.528008] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 3.528461] THERMAL EST: found 3 subdevs [ 3.528466] THERMAL EST num_resources: 0 [ 3.528471] [THERMAL EST subdev 0] [ 3.528476] [THERMAL EST subdev 1] [ 3.528485] [THERMAL EST subdev 2] [ 3.528951] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 3.528954] THERMAL EST: thz register success. [ 3.529097] THERMAL EST: end of probe, return err: 0 [ 3.531064] hisi_sas: driver version v1.6 [ 3.535814] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 G bps 0x1 impl platform mode [ 3.535825] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pi o slum part deso sadm apst [ 3.537097] scsi host0: tegra_ahci [ 3.538058] scsi host1: tegra_ahci [ 3.538491] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x1 00 irq 24 [ 3.538495] ata2: DUMMY [ 3.547393] libphy: Fixed MDIO Bus: probed [ 3.549930] tun: Universal TUN/TAP device driver, 1.6 [ 3.549934] tun: (C) 1999-2004 Max Krasnyansky [ 3.550888] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.550891] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.550979] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.550982] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.551067] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.551070] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.551153] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.551156] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.553012] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.556780] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d d ea 77 [ 3.556969] libphy: dwc_phy: probed [ 3.557419] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 3.559420] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 3.560082] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 3.560893] PPP generic driver version 2.4.2 [ 3.561124] PPP BSD Compression module registered [ 3.561128] PPP Deflate Compression module registered [ 3.561148] PPP MPPE Compression module registered [ 3.561152] NET: Registered protocol family 24 [ 3.561251] usbcore: registered new interface driver r8152 [ 3.561338] usbcore: registered new interface driver asix [ 3.561420] usbcore: registered new interface driver ax88179_178a [ 3.561732] usbcore: registered new interface driver cdc_ether [ 3.561827] usbcore: registered new interface driver net1080 [ 3.561945] usbcore: registered new interface driver cdc_subset [ 3.562029] usbcore: registered new interface driver zaurus [ 3.562119] usbcore: registered new interface driver cdc_ncm [ 3.562368] VFIO - User Level meta-driver version: 0.3 [ 3.564254] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.564270] ehci-pci: EHCI PCI platform driver [ 3.564357] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.564366] ohci-pci: OHCI PCI platform driver [ 3.564450] ohci-platform: OHCI generic platform driver [ 3.570116] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 3.571954] tegra-xusb 3530000.xhci: extcon 0: ffffffc1eac4cc00 id [ 3.572883] usbcore: registered new interface driver uas [ 3.573012] usbcore: registered new interface driver usb-storage [ 3.573189] usbcore: registered new interface driver usbserial [ 3.574420] tegra-xusb 3530000.xhci: Firmware timestamp: 2018-12-26 10:30:04 UTC, Version: 55.12 release [ 3.578860] tegra-xudc-new 3550000.xudc: device count: 1 [ 3.579979] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 3.580520] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.580809] mousedev: PS/2 mouse device common for all mice [ 3.580871] usbcore: registered new interface driver xpad [ 3.581737] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.592984] nct1008_nct72 7-004c: initial LOC temp: 26000 [ 3.593292] nct1008_nct72 7-004c: initial EXT temp: 39750 [ 3.593899] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 3.594192] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 3.594380] nct1008_nct72 7-004c: nct1008_probe: initialized [ 3.599372] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.599395] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 3.600259] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 3.600307] tegra-xusb 3530000.xhci: irq 71, io mem 0x03530000 [ 3.600544] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.600550] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.600555] usb usb1: Product: xHCI Host Controller [ 3.600559] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 3.600563] usb usb1: SerialNumber: 3530000.xhci [ 3.601026] hub 1-0:1.0: USB hub found [ 3.601079] hub 1-0:1.0: 4 ports detected [ 3.601489] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.601499] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 3.601711] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.601716] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.601721] usb usb2: Product: xHCI Host Controller [ 3.601725] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 3.601732] usb usb2: SerialNumber: 3530000.xhci [ 3.602097] hub 2-0:1.0: USB hub found [ 3.602134] hub 2-0:1.0: 3 ports detected [ 3.703949] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.705277] Wake73 for irq=42 [ 3.706527] rtc rtc1: alarm rtc device [ 3.706541] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 3.706565] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.706751] i2c /dev entries driver [ 3.708318] pca954x 2-0070: vcc-pullup regulator not found [ 3.708779] pca954x 2-0070: pca954x_probe: forcing device bus number, start 30. [ 3.709313] i2c i2c-2: Added multiplexed i2c bus 30 [ 3.709883] i2c i2c-2: Added multiplexed i2c bus 31 [ 3.710414] i2c i2c-2: Added multiplexed i2c bus 32 [ 3.710711] i2c i2c-2: Added multiplexed i2c bus 33 [ 3.710717] pca954x 2-0070: registered 4 multiplexed busses for I2C switch pca9546 [ 3.712159] pca9570 30-0024: pca9570_icr_move, forward val=5 [ 3.756788] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.758841] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.821219] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 3.821365] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 3.821587] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 3.821727] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 3.853645] ata1: SATA link down (SStatus 0 SControl 300) [ 3.922783] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 3.922928] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 3.923122] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 3.923333] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 3.944368] usb 1-2: new low-speed USB device number 2 using tegra-xusb [ 3.960920] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.961247] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.998633] usb 1-2: New USB device found, idVendor=046d, idProduct=c077 [ 3.998641] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.998645] usb 1-2: Product: USB Optical Mouse [ 3.998649] usb 1-2: Manufacturer: Logitech [ 4.031553] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.031699] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.031897] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.032070] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 4.142341] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.142484] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.142683] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.142852] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 4.253088] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.253231] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.253426] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.253568] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 4.324037] tegradc 15210000.nvdisplay: fb registered [ 4.329345] gpio tegra-gpio wake21 for gpio=121(P:1) [ 4.336034] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4.342178] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.348318] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4.362138] Parent Clock set for DC plld2 [ 4.363866] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.364015] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.364217] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.364360] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 4.396820] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 4.407287] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 4.413843] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 4.456070] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4.463331] Extcon AUX1(HDMI) enable [ 4.474624] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.481117] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.488264] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.494724] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 4.599481] tegradc 15210000.nvdisplay: blank - powerdown [ 4.611820] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.611984] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.612187] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.612346] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 4.637278] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 4.637283] Extcon AUX1(HDMI) disable [ 4.664640] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 4.665265] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 4.671754] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 4.699980] tegradc 15210000.nvdisplay: unblank [ 4.707235] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4.707843] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.708317] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4.719535] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.719722] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.719909] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.720046] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 4.721205] Parent Clock set for DC plld2 [ 4.724864] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 4.726229] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 4.726240] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 4.761981] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4.761985] Extcon AUX1(HDMI) enable [ 4.830286] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.830427] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.830612] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.830746] pca9570 30-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 4.830750] pca9570 30-0024: pca9570_icr_move:i2c write failed [ 4.830852] pca9570: probe of 30-0024 failed with error -121 [ 4.830999] pca9570 31-0024: pca9570_icr_move, forward val=5 [ 4.941274] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.941415] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.941602] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.941740] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 5.052003] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.052139] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 5.052326] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.052460] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 5.162711] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.162850] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 5.163036] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.163170] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 5.273412] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.273553] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 5.273739] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.273874] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 5.384109] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.384272] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 5.384458] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.384591] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 5.494842] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.494981] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 5.495167] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.495315] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 5.605559] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.605696] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 5.605880] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.606014] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 5.716252] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.716389] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 5.716606] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.716739] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 5.826977] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.827114] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 5.827306] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.827457] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 5.937702] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.937839] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 5.938025] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.938158] pca9570 31-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 5.938163] pca9570 31-0024: pca9570_icr_move:i2c write failed [ 5.938254] pca9570: probe of 31-0024 failed with error -121 [ 5.938383] pca9570 32-0024: pca9570_icr_move, forward val=5 [ 6.048654] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.048813] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 6.049010] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.049161] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 6.159418] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.159572] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 6.159773] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.159924] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 6.270189] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.270344] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 6.270539] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.270689] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 6.380968] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.381124] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 6.381318] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.381469] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 6.491708] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.491862] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 6.492057] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.492207] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 6.602472] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.602628] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 6.602822] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.602974] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 6.713255] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.713436] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 6.713635] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.713786] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 6.719920] Wake76 for irq=199 [ 6.719924] Wake77 for irq=199 [ 6.719926] Wake78 for irq=199 [ 6.719928] Wake79 for irq=199 [ 6.719930] Wake80 for irq=199 [ 6.719933] Wake81 for irq=199 [ 6.719935] Wake82 for irq=199 [ 6.719987] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 6.719993] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 6.824116] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.824281] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 6.824479] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.824616] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 6.934900] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.935081] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 6.935282] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 6.935423] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 7.045678] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 7.045845] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 7.046058] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 7.046194] pca9570 32-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 7.046199] pca9570 32-0024: pca9570_icr_move:i2c write failed [ 7.046338] pca9570: probe of 32-0024 failed with error -121 [ 7.047018] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 7.052728] parse_throttle_dt_data: Num cap clks = 4 [ 7.052734] parse_throttle_dt_data: clk=mcpu type=1 [ 7.052738] parse_throttle_dt_data: clk=bcpu type=2 [ 7.052745] parse_throttle_dt_data: clk=gpu type=4 [ 7.052749] parse_throttle_dt_data: clk=emc type=3 [ 7.054111] tegra_throttle_probe: probe successful. #cdevs=4 [ 7.054745] FAN dev name: pwm-fan [ 7.054805] FAN:gpio request success. [ 7.054815] FAN: can't find tach_gpio [ 7.054861] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 7.055156] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 7.055162] pwm_fan_driver pwm-fan: tach period: 1000 [ 7.055551] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 7.055557] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 7.055562] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 7.055567] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 7.055571] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 7.055604] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 7.055609] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 7.055613] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 7.055618] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 7.055622] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 7.057546] device-mapper: uevent: version 1.0.3 [ 7.059028] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 7.064008] cpufreq: platform driver Initialization: pass [ 7.065349] cpuidle: Initializing cpuidle driver init for Denver cluster [ 7.065463] cpuidle: Initializing cpuidle driver init for A57 cluster [ 7.074485] sdhci: Secure Digital Host Controller Interface driver [ 7.074488] sdhci: Copyright(c) Pierre Ossman [ 7.074490] sdhci-pltfm: SDHCI platform and OF driver helper [ 7.076033] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 7.078005] CMDQ: cmdq_platfm_init successful [ 7.079175] CQE: CMD_TIMING bit set for R1B DCMD [ 7.081762] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 7.090606] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 7.090658] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 7.092995] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 7.094717] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 258 [ 7.099893] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 7.101000] tegra-se-nvhost 15810000.se: initialized [ 7.102088] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.103059] tegra-se-nvhost 15820000.se: initialized [ 7.104011] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.104735] tegra-se-nvhost 15830000.se: initialized [ 7.105606] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.106146] tegra-se-nvhost 15840000.se: initialized [ 7.107221] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.107464] hidraw: raw HID events driver (C) Jiri Kosina [ 7.110170] input: Logitech USB Optical Mouse as /devices/3530000.xhci/usb1/1-2/1-2:1.0/0003:046D:C077.0001/input/input0 [ 7.110358] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-3530000.xhci-2/input0 [ 7.110421] usbcore: registered new interface driver usbhid [ 7.110422] usbhid: USB HID core driver [ 7.112111] tegra-i2c 3160000.i2c: no acknowledge from address 0x42 [ 7.112139] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 7.112226] ina3221x: probe of 0-0042 failed with error -121 [ 7.112435] tegra-i2c 3160000.i2c: no acknowledge from address 0x43 [ 7.112460] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 7.112532] ina3221x: probe of 0-0043 failed with error -121 [ 7.114964] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 7.117123] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 7.117362] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 7.117483] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 7.117688] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 7.118380] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 7.118447] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 7.118499] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 7.118544] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 7.118645] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 7.118977] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (52) [ 7.118979] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 7.119563] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 7.121139] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 7.121554] tegra186-aondbg aondbg: aondbg driver probe() OK [ 7.121710] register_ari_mca_banks: Registered MCA ROC:IOB [ 7.121775] register_ari_mca_banks: Registered MCA ROC:CCE [ 7.122072] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.122074] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 7.122076] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 7.122122] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.122124] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 7.122125] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 7.122172] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.122174] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 7.122175] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 7.122218] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.122219] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 7.122221] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 7.122263] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.122264] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 7.122266] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 7.122307] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.122311] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 7.122312] tegra18-bridge 2100000.axip2p: bridge probed OK [ 7.122356] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.122360] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 7.122361] tegra18-bridge 2110000.axip2p: bridge probed OK [ 7.122403] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.122407] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 7.122409] tegra18-bridge 2120000.axip2p: bridge probed OK [ 7.122451] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.122455] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 7.122456] tegra18-bridge 2130000.axip2p: bridge probed OK [ 7.122498] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.122500] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 7.122501] tegra18-bridge 2140000.axip2p: bridge probed OK [ 7.122547] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.122552] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 7.122553] tegra18-bridge 2150000.axip2p: bridge probed OK [ 7.122596] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.122600] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 7.122601] tegra18-bridge 2160000.axip2p: bridge probed OK [ 7.122643] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.122647] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 7.122649] tegra18-bridge 2170000.axip2p: bridge probed OK [ 7.122698] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.122703] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 7.122704] tegra18-bridge 2180000.axip2p: bridge probed OK [ 7.122747] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.122751] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 7.122752] tegra18-bridge 2190000.axip2p: bridge probed OK [ 7.122811] **** A57 ECC: Enabled [ 7.122813] tegra18_a57_serr_init: on CPU 5 a A57 Core [ 7.122870] tegra18x_actmon d230000.actmon: in actmon_register()... [ 7.123349] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.123750] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 7.123875] denver_knobs_init:MTS_VERSION:43068234 [ 7.125915] nvpmodel: initialized successfully [ 7.132785] trusty-virtio trusty:virtio: initializing [ 7.132884] trusty_ipc virtio0: vring0: va(pa) ffffffc1e5632000(0) qsz 32 notifyid 1 [ 7.132890] trusty_ipc virtio0: vring1: va(pa) ffffffc1e5638000(0) qsz 32 notifyid 2 [ 7.132951] trusty-virtio trusty:virtio: initializing done [ 7.133038] trusty_ipc virtio0: is online [ 7.134027] usbcore: registered new interface driver snd-usb-audio [ 7.135299] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 7.135367] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 7.136862] tegra210-axbar tegra210-axbar: Can't retrieve pll_a_out0 clock [ 7.136868] tegra210-axbar: probe of tegra210-axbar failed with error -2 [ 7.139536] tegra-asoc: sound: Missing property nvidia,num-clk [ 7.139856] u32 classifier [ 7.139857] Actions configured [ 7.139926] Initializing XFRM netlink socket [ 7.140558] NET: Registered protocol family 10 [ 7.141359] NET: Registered protocol family 17 [ 7.141368] NET: Registered protocol family 15 [ 7.141449] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 7.141490] Bluetooth: RFCOMM socket layer initialized [ 7.141497] Bluetooth: RFCOMM ver 1.11 [ 7.141500] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 7.141504] Bluetooth: HIDP socket layer initialized [ 7.141520] 9pnet: Installing 9P2000 support [ 7.141553] Key type dns_resolver registered [ 7.148324] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input1 [ 7.148442] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input2 [ 7.148653] gpio tegra-gpio wake71 for gpio=125(P:5) [ 7.148709] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 7.149943] Registered cp15_barrier emulation handler [ 7.156981] Registered setend emulation handler [ 7.157784] registered taskstats version 1 [ 7.160611] isp 15600000.isp: initialized [ 7.164252] nvcsi 150c0000.nvcsi: initialized [ 7.168859] Wake83 for irq=51 [ 7.168945] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 7.169008] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 7.169073] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 7.169195] input: gpio-keys as /devices/gpio-keys/input/input3 [ 7.169300] tegra-vi4 15700000.vi: initialized [ 7.170337] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--3 bound [ 7.170442] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound [ 7.170521] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 7.189365] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 7.206279] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:02:46 UTC (946688566) [ 7.223846] mmc0: periodic cache flush enabled [ 7.223863] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.224454] mmcblk0: mmc0:0001 DG4032 29.1 GiB [ 7.228717] mmcblk0boot0: mmc0:0001 DG4032 partition 1 4.00 MiB [ 7.228877] mmcblk0boot1: mmc0:0001 DG4032 partition 2 4.00 MiB [ 7.229058] mmcblk0rpmb: mmc0:0001 DG4032 partition 3 4.00 MiB [ 7.232686] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 [ 7.238833] bpmp: mounted debugfs mirror [ 7.239801] bwmgr: missing cdev-type property [ 7.244390] spmic-ldo0: disabling [ 7.244614] spmic-ldo1: disabling [ 7.244759] en-vdd-sd: disabling [ 7.244761] vdd-usb0-5v: disabling [ 7.244763] vdd-usb1-5v: disabling [ 7.244764] en-vdd-cam-1v2: disabling [ 7.244766] vdd-fan: disabling [ 7.244767] vdd-3v3: disabling [ 7.244769] en-vdd-vcm-2v8: disabling [ 7.244770] vdd-usb2-5v: disabling [ 7.244772] vdd-sys-bl: disabling [ 7.244773] en-vdd-sys: disabling [ 7.244775] ALSA device list: [ 7.244777] #0: tegra-hda at 0x3518000 irq 384 [ 7.398436] mmc1: hw tuning done ... [ 7.405611] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 9.293541] extcon-disp-state external-connection:disp-state: cable 40 state 1 [ 9.295376] Freeing unused kernel memory: 8576K [ 9.307934] Extcon HDMI: HPD enabled [ 9.307973] tegradc 15210000.nvdisplay: hdmi: plugged [ 9.308198] usb usb2: usb_suspend_both: status 0 [ 9.323989] tegradc 15210000.nvdisplay: read_edid_into_buffer: extension_blocks = 1, max_ext_blocks = 3 [ 9.339830] tegradc 15210000.nvdisplay: hdmi_recheck_edid: read_edid_into_buffer() returned 256 [ 9.349893] tegradc 15210000.nvdisplay: old edid len = 256 [ 9.354895] L4T-INITRD Build DATE: Sat Jan 1 01:02:48 UTC 2000 [ 9.359966] Root device found: mmcblk0p1 [ 9.362221] Found dev node: /dev/mmcblk0p1 [ 9.374518] tegradc 15210000.nvdisplay: hdmi: No EDID change. No userspace active. Using cached mode to initialize dc! [ 9.391232] EXT4-fs (mmcblk0p1): recovery complete [ 9.398273] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 9.408823] Rootfs mounted over mmcblk0p1 [ 9.418446] tegradc 15210000.nvdisplay: blank - powerdown [ 9.459795] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 9.459798] Extcon AUX1(HDMI) disable [ 9.477130] random: crng init done [ 9.482159] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 9.482256] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 9.483022] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 9.488816] tegradc 15210000.nvdisplay: unblank [ 9.489726] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 9.489832] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 9.489934] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 9.491429] Parent Clock set for DC plld2 [ 9.494808] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 9.496172] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 9.496179] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 9.531570] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 9.531573] Extcon AUX1(HDMI) enable [ 11.666827] extcon-disp-state external-connection:disp-state: cable 40 state 1 already set. [ 11.666831] Extcon HDMI: HPD enabled [ 11.666842] tegradc 15210000.nvdisplay: hdmi: plugged [ 11.690595] Switching from initrd to actual rootfs [ 11.824126] systemd[1]: System time before build time, advancing clock. [ 11.858636] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.908595] cgroup: cgroup2: unknown option "nsdelegate" [ 11.938454] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 11.966257] systemd[1]: Detected architecture arm64. [ 12.070309] systemd[1]: Set hostname to <1422820078379>. [ 12.188119] systemd[1]: File /lib/systemd/system/systemd-udevd.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 12.206609] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 12.398973] systemd[1]: Created slice System Slice. [ 12.409096] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 12.420242] systemd[1]: Listening on Journal Socket (/dev/log). [ 12.442722] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 12.459991] systemd[1]: Reached target User and Group Name Lookups. [ 12.506753] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 14.066776] EXT4-fs (mmcblk0p31): VFS: Can't find ext4 filesystem Press Enter for maintenance (or press Control-D to continue):