TEGRA210 Model: NVIDIA P3450-Porg Board: NVIDIA P3450-PORG DRAM: 4 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 SF: Detected MX25U3235F with page size 256 Bytes, erase size 4 KiB, total 4 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 1364 bytes read in 125 ms (9.8 KiB/s) 1: primary kernel Retrieving file: /boot/initrd 5562384 bytes read in 295 ms (18 MiB/s) Retrieving file: /boot/Image 34330632 bytes read in 1549 ms (21.1 MiB/s) append: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_c onsole_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 cor e_edp_mv=1075 core_edp_ma=4000 tegra_fbmem=0x800000@0x92cb4000 is_hdmi_initialised=1 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ex t4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_own er_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 tegra_fbmem=0x800000@0x92cb7000 is_hdmi_initialised=1 root=/dev/mmcblk0p1 rw ro otwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=t ty0 fbcon=map:0 net.ifnames=0 ## Flattened Device Tree blob at 83100000 Booting using the fdt blob at 0x83100000 reserving fdt memory region: addr=80000000 size=20000 Using Device Tree in place at 0000000083100000, end 00000000831777a1 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3456) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f9197770 1] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Jun 25 21:25:44 PDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00800000@92cb4000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem: 00800000@92cb7000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefb2000 s61656 r8192 d32552 u102400 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touc h_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 l p0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 tegra_fbmem=0x800000@0x92cb4000 is_hdmi_initialised=1 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0 p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize us b_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart825 0-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 tegra_fbmem=0x800000@0x92cb7000 is_hdmi_initiali [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 28888(88%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3562000K/4159488K available (15294K kernel code, 2934K rwdata, 6640K rodata, 8576K init, 609K bss, 122352K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a13d808 - 0xffffff800a1d5f7c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.009964] Console: colour dummy device 80x25 [ 0.014617] console [tty0] enabled [ 0.018129] bootconsole [uart8250] disabled [0000.159] [L4T TegraBoot] (version 00.00.2018.01-l4t-80a468da) [0000.165] Processing in cold boot mode Bootloader 2 [0000.170] A02 Bootrom Patch rev = 1023 [0000.173] Power-up reason: software reset [0000.177] No Battery Present [0000.179] pmic max77620 reset reason [0000.183] pmic max77620 NVERC : 0x0 [0000.186] RamCode = 0 [0000.188] Platform has DDR4 type RAM [0000.192] max77620 disabling SD1 Remote Sense [0000.196] Setting DDR voltage to 1125mv [0000.200] Serial Number of Pmic Max77663: 0x3219e8 [0000.208] Entering ramdump check [0000.211] Get RamDumpCarveOut = 0x0 [0000.214] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8 [0000.219] Last reboot was clean, booting normally! [0000.224] Sdram initialization is successful [0000.228] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000 [0000.234] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000 [0000.240] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000 [0000.246] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000 [0000.251] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000 [0000.257] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000 [0000.263] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000 [0000.269] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000 [0000.285] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000 [0000.291] Platform-DebugCarveout: 0 [0000.294] Nck Carveout Base=0x00000000ff080000 Size=0x00200000 [0000.300] Non secure mode, and RB not enabled. [0000.304] Read GPT from (4:0) [0000.549] Csd NumOfBlocks=125042688 [0000.554] Set High speed to 1 [0000.563] Using GPT Primary to query partitions [0000.568] Loading Tboot-CPU binary [0000.578] Verifying TBC in OdmNonSecureSBK mode [0000.588] Bootloader load address is 0xa0000000, entry address is 0xa0000258 [0000.595] Bootloader downloaded successfully. [0000.599] Downloaded Tboot-CPU binary to 0xa0000258 [0000.604] MAX77620_GPIO5 configured [0000.607] CPU power rail is up [0000.610] CPU clock enabled [0000.614] Performing RAM repair [0000.617] Updating A64 Warmreset Address to 0xa00002e9 [0000.622] Loading NvTbootBootloaderDTB [0000.646] Verifying NvTbootBootloaderDTB in OdmNonSecureSBK mode [0000.711] Bootloader DTB Load Address: 0x83000000 [0000.716] Loading NvTbootKernelDTB [0000.740] Verifying NvTbootKernelDTB in OdmNonSecureSBK mode [0000.805] Kernel DTB Load Address: 0x83100000 [0000.810] Loading cboot binary [0000.840] Verifying EBT in OdmNonSecureSBK mode [0000.881] Bootloader load address is 0x92c00000, entry address is 0x92c00258 [0000.888] Bootloader downloaded successfully. [0000.893] Read PT from (2:0) [0000.908] Using BFS PT to query partitions [0000.912] PT: Partition NCT NOT found ! [0000.916] Warning: Find Partition via PT Failed [0000.920] Next binary entry address: 0x92c00258 [0000.925] BoardId: 3448 [0000.929] Overriding pmu board id with proc board id [0000.934] Display board id is not available [0000.962] Verifying SC7EntryFw in OdmNonSecureSBK mode [0001.014] /bpmp deleted [0001.017] SC7EntryFw header found loaded at 0xff700000 [0001.207] OVR2 PMIC [0001.208] Bpmp FW successfully loaded [0001.213] WB0 init successfully at 0xff780000 [0001.217] Set NvDecSticky Bits [0001.221] GSC2 address ff53fffc value c0edbbcc [0001.227] GSC MC Settings done [0001.230] TOS Image length 53680 [0001.233] Monitor size 53680 [0001.236] OS size 0 [0001.243] Secure Os AES-CMAC Verification Success! [0001.248] TOS image cipher info: plaintext [0001.252] Loading and Validation of Secure OS Successful [0001.268] SC7 Entry Firmware - 0xff700000, 0x4000 [0001.272] NvTbootPackSdramParams: start. [0001.277] NvTbootPackSdramParams: done. [0001.281] Tegraboot started after 87459 us [0001.285] Basic modules init took 874089 us [0001.289] Sec Bootdevice Read Time = 12 ms, Read Size = 65 KB [0001.295] Sec Bootdevice Write Time = 0 ms, Write Size = 0 KB [0001.300] Storage Device Read Time = 108 ms, Read Size = 2241 KB [0001.306] Storage Device Write Time = 0 ms, Write Size = 0 KB [0001.311] Next stage binary read took 24382 us [0001.316] Carveout took -36067 us [0001.319] CPU initialization took 362381 us [0001.323] Total time taken by TegraBoot 1224785 us [0001.327] Starting CPU & Halting co-processor 64NOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 15:55:29, Aug 3 2020 ERROR: Error initializing runtime service trusty_fast [0001.450] RamCode = 0 [0001.454] LPDDR4 Training: Read DT: Number of tables = 2 [0001.459] EMC Training (SRC-freq: 204000; DST-freq: 1600000) [0001.472] EMC Training Successful [0001.475] 408000 not found in DVFS table [0001.482] RamCode = 0 [0001.485] DT Write: emc-table@204000 succeeded [0001.490] DT Write: emc-table@1600000 succeeded [0001.495] LPDDR4 Training: Write DT: Number of tables = 2 [0001.539] [0001.541] Debug Init done [0001.543] Marked DTB cacheable [0001.546] Bootloader DTB loaded at 0x83000000 [0001.551] Marked DTB cacheable [0001.554] Kernel DTB loaded at 0x83100000 [0001.558] DeviceTree Init done [0001.571] Pinmux applied successfully [0001.575] gicd_base: 0x50041000 [0001.578] gicc_base: 0x50042000 [0001.581] Interrupts Init done [0001.585] Using base:0x60005090 & irq:208 for tick-timer [0001.591] Using base:0x60005098 for delay-timer [0001.595] platform_init_timer: DONE [0001.599] Timer(tick) Init done [0001.602] osc freq = 38400 khz [0001.606] [0001.608] Welcome to L4T Cboot [0001.610] [0001.612] Cboot Version: 00.00.2018.01-t210-3a7ad565 [0001.617] calling constructors [0001.620] initializing heap [0001.622] initializing threads [0001.625] initializing timers [0001.628] creating bootstrap completion thread [0001.632] top of bootstrap2() [0001.635] CPU: ARM Cortex A57 [0001.638] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000 [0001.643] initializing platform [0001.650] Manufacturer: MF = 0xc2, ID MSB = 0x25 [0001.655] ID LSB = 0x36, ID-CFI len = 194 bytes [0001.659] Macronix QSPI chip present [0001.663] SPI device register [0001.666] init boot device [0001.668] allocating memory for boot device(SPI) [0001.673] registering boot device [0001.682] sdmmc node status = okay [0001.686] sdcard instance = 0 [0001.688] sdcard gpio handle 0x56 [0001.692] sdcard gpio pin 0xc9 [0001.695] sdcard gpio flags 0x0 [0001.698] vmmc-supply 0x99 [0001.700] Instance: 0 [0001.702] Allocating memory for context [0001.706] enabling clock [0001.709] sd card init [0001.711] Check card present and stable [0001.715] Send command 0 [0001.731] Send command 3 [0001.735] Set RCA for the card [0001.738] Query card specific data by command 9 [0001.745] Parse CSD data [0001.747] Send command 7 [0001.758] Calling sd device register [0001.761] Init sdcard [0001.763] Allocating memory for boot device [0001.767] Registering user device [0001.780] Enable APE clock [0001.783] Un-powergate APE partition [0001.786] of_register: registering tegra_udc to of_hal [0001.792] of_register: registering inv20628-driver to of_hal [0001.797] of_register: registering ads1015-driver to of_hal [0001.803] of_register: registering lp8557-bl-driver to of_hal [0001.808] of_register: registering bq2419x_charger to of_hal [0001.814] of_register: registering bq27441_fuel_gauge to of_hal [0001.826] gpio framework initialized [0001.829] of_register: registering tca9539_gpio to of_hal [0001.834] of_register: registering tca9539_gpio to of_hal [0001.840] of_register: registering i2c_bus_driver to of_hal [0001.845] of_register: registering i2c_bus_driver to of_hal [0001.851] of_register: registering i2c_bus_driver to of_hal [0001.857] pmic framework initialized [0001.860] of_register: registering max77620_pmic to of_hal [0001.865] regulator framework initialized [0001.869] of_register: registering tps65132_bl_driver to of_hal [0001.875] initializing target [0001.881] gpio_driver_register: register 'tegra_gpio_driver' driver [0001.889] board ID = D78, board SKU = 0 [0001.893] Skipping Z3! [0001.898] fixed regulator driver initialized [0001.915] initializing OF layer [0001.918] NCK carveout not present [0001.922] Skipping dts_overrides [0001.926] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0001.943] I2C Bus Init done [0001.945] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0001.955] I2C Bus Init done [0001.958] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0001.968] I2C Bus Init done [0001.971] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0001.982] I2C Bus Init done [0001.984] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0001.995] I2C Bus Init done [0001.997] of_children_init: Ops found for compatible string maxim,max77620 [0002.008] max77620_init using irq 118 [0002.012] register 'maxim,max77620' pmic [0002.017] gpio_driver_register: register 'max77620-gpio' driver [0002.023] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.033] I2C Bus Init done [0002.037] NCK carveout not present [0002.047] Find /i2c@7000c000's alias i2c0 [0002.051] get eeprom at 1-a0, size 256, type 0 [0002.060] Find /i2c@7000c500's alias i2c2 [0002.064] get eeprom at 3-a0, size 256, type 0 [0002.068] get eeprom at 3-ae, size 256, type 0 [0002.072] pm_ids_update: Updating 1,a0, size 256, type 0 [0002.078] I2C slave not started [0002.081] I2C write failed [0002.083] Writing offset failed [0002.086] eeprom_init: EEPROM read failed [0002.090] pm_ids_update: eeprom init failed [0002.094] pm_ids_update: Updating 3,a0, size 256, type 0 [0002.125] pm_ids_update: The pm board id is 3448-0000-200 [0002.131] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50 [0002.139] pm_ids_update: pm id update successful [0002.143] pm_ids_update: Updating 3,ae, size 256, type 0 [0002.173] pm_ids_update: The pm board id is 3449-0000-200 [0002.180] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57 [0002.188] pm_ids_update: pm id update successful [0002.218] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0002.224] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB [0002.233] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0002.238] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB [0002.247] updating /chosen/nvidia,ethernet-mac node 00:04:4b:e6:8c:b1 [0002.253] Plugin Manager: Parse ODM data 0x00094000 [0002.264] shim_cmdline_install: /chosen/bootargs: earlycon=uart8250,mmio32,0x70006000 [0002.278] Find /i2c@7000c000's alias i2c0 [0002.282] get eeprom at 1-a0, size 256, type 0 [0002.291] Find /i2c@7000c500's alias i2c2 [0002.295] get eeprom at 3-a0, size 256, type 0 [0002.299] get eeprom at 3-ae, size 256, type 0 [0002.304] pm_ids_update: Updating 1,a0, size 256, type 0 [0002.309] I2C slave not started [0002.312] I2C write failed [0002.315] Writing offset failed [0002.318] eeprom_init: EEPROM read failed [0002.322] pm_ids_update: eeprom init failed [0002.326] pm_ids_update: Updating 3,a0, size 256, type 0 [0002.356] pm_ids_update: The pm board id is 3448-0000-200 [0002.362] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50 [0002.369] pm_ids_update: pm id update successful [0002.374] pm_ids_update: Updating 3,ae, size 256, type 0 [0002.404] pm_ids_update: The pm board id is 3449-0000-200 [0002.411] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57 [0002.417] pm_ids_update: pm id update successful [0002.448] Add serial number:1422519063333 as DT property [0002.456] Applying platform configs [0002.463] platform-init is not present. Skipping [0002.467] calling apps_init() [0002.492] Found 12 GPT partitions in "sd0" [0002.496] Proceeding to Cold Boot [0002.499] starting app android_boot_app [0002.503] Device state: unlocked [0002.506] display console init [0002.515] could not find regulator [0002.518] hdmi cable connected [0002.534] edid read success [0002.551] DT entry for leds-pwm not found [0002.555] edid read success [0002.558] width = 640, height = 480, frequency = 25174825 [0002.563] width = 640, height = 480, frequency = 25174825 [0002.569] width = 640, height = 480, frequency = 25174825 [0002.574] width = 1920, height = 1080, frequency = 148500000 [0002.580] width = 1920, height = 1080, frequency = 174500000 [0002.585] width = 1280, height = 720, frequency = 74250000 [0002.591] width = 640, height = 480, frequency = 25174825 [0002.596] width = 720, height = 480, frequency = 26973026 [0002.602] width = 720, height = 480, frequency = 26973026 [0002.607] width = 1280, height = 720, frequency = 74175824 [0002.612] width = 720, height = 576, frequency = 26973026 [0002.618] width = 720, height = 576, frequency = 26973026 [0002.623] width = 1280, height = 720, frequency = 74175824 [0002.629] width = 1920, height = 1080, frequency = 148351648 [0002.634] width = 1920, height = 1080, frequency = 148351648 [0002.640] Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.648] tmds-config node not found [0002.652] pmc_set_io_pad_voltage: Error -2 retrieving platform-io-pad-voltagepropsetting 'avdd-io-hdmi-dp' regulator to 1050000 micro volts [0002.667] setting 'vdd-1v8' regulator to 1800000 micro volts [0002.674] could not find regulator [0002.677] could not find regulator [0002.681] could not find regulator [0002.709] using default cmu settings [0002.713] dc_hdmi_enable, starting HDMI initialisation [0002.719] dc_hdmi_enable, HDMI initialisation complete [0002.724] list and configure display window [0002.733] display console init completed [0002.744] subnode volume_up is not found ! [0002.748] subnode back is not found ! [0002.751] subnode volume_down is not found ! [0002.755] subnode menu is not found ! [0002.759] Gpio keyboard init success [0002.803] found decompressor handler: lz4-legacy [0002.817] decompressing blob (type 1)... [0002.853] load_bmp_blob: panelresolution=1080 type=3 [0002.904] decompressor handler not found [0002.908] load_firmware_blob: Firmware blob loaded, entries=2 [0002.913] -------> se_aes_verify_sbk_clear: 747 [0002.918] se_aes_verify_sbk_clear: Error [0002.922] bl_battery_charging: connected to external power supply [0002.929] xusb is supported [0002.935] error while finding nvidia,portmap [0003.439] xusb blob version 0 size 124416 [0003.443] firmware size 124416 [0003.448] Firmware timestamp: 0x5da88fc3, Version: 50.25 release [0003.458] xhci0: 64 bytes context size, 32-bit DMA [0003.498] usbus0: 5.0Gbps Super Speed USB v3.0 [0003.518] uhub0: on usbus0 [0004.168] uhub0: 9 ports with 9 removable, self powered [0005.168] failed to get HID devices [0005.171] failed to init xhci or no usb device attached [0005.182] device_query_partition_size: failed to open partition sd0:MSC ! [0005.189] MSC Partition not found [0005.195] device_query_partition_size: failed to open partition sd0:USP ! [0005.202] USP partition read failed! [0005.205] blob_init: blob-partition USP header read failed [0005.211] android_boot Unable to update recovery partition [0005.216] kfs_getpartname: name = LNX [0005.220] Loading kernel from LNX [0005.318] load kernel from storage [0005.330] decompressor handler not found [0005.387] Successfully loaded kernel and ramdisk images [0005.394] load_bmp_blob: panelresolution=1080 type=3 [0005.888] display bmp image done [0005.892] NCK carveout not present [0005.895] Skipping dts_overrides [0005.898] NCK carveout not present [0005.908] Find /i2c@7000c000's alias i2c0 [0005.912] get eeprom at 1-a0, size 256, type 0 [0005.921] Find /i2c@7000c500's alias i2c2 [0005.925] get eeprom at 3-a0, size 256, type 0 [0005.929] get eeprom at 3-ae, size 256, type 0 [0005.933] pm_ids_update: Updating 1,a0, size 256, type 0 [0005.939] I2C slave not started [0005.942] I2C write failed [0005.944] Writing offset failed [0005.947] eeprom_init: EEPROM read failed [0005.951] pm_ids_update: eeprom init failed [0005.956] pm_ids_update: Updating 3,a0, size 256, type 0 [0005.986] pm_ids_update: The pm board id is 3448-0000-200 [0005.992] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50 [0006.000] pm_ids_update: pm id update successful [0006.005] pm_ids_update: Updating 3,ae, size 256, type 0 [0006.035] pm_ids_update: The pm board id is 3449-0000-200 [0006.041] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57 [0006.049] pm_ids_update: pm id update successful [0006.080] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0006.086] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB [0006.094] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0006.100] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB [0006.108] updating /chosen/nvidia,ethernet-mac node 00:04:4b:e6:8c:b1 [0006.115] Plugin Manager: Parse ODM data 0x00094000 [0006.125] shim_cmdline_install: /chosen/bootargs: earlycon=uart8250,mmio32,0x70006000 [0006.133] Add serial number:1422519063333 as DT property [0006.142] "bpmp" doesn't exist, creating [0006.147] Updated bpmp info to DTB [0006.152] Updated initrd info to DTB [0006.156] "proc-board" doesn't exist, creating [0006.161] Updated board info to DTB [0006.165] "pmu-board" doesn't exist, creating [0006.170] Updated board info to DTB [0006.174] "display-board" doesn't exist, creating [0006.179] Updated board info to DTB [0006.183] "reset" doesn't exist, creating [0006.187] Updated reset info to DTB [0006.191] Cmdline: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video= tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0x ff780000 core_edp_mv=1075 core_edp_ma=4000 tegra_fbmem=0x800000@0x92cb4000 is_hdmi_initialised=1 [0006.229] DTB cmdline: earlycon=uart8250,mmio32,0x70006000 [0006.235] boot image cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [0006.248] Updated bootarg info to DTB [0006.252] Adding uuid 00000001644495811c00000003ff8400 to DT [0006.258] Adding eks info 0 to DT [0006.263] WARNING: Failed to pass NS DRAM ranges to TOS, err: -7 [0006.269] Updated memory info to DTB [0006.275] Updated system-lp0-disable info to DTB [0006.283] set vdd_core voltage to 1075 mv [0006.287] setting 'vdd-core' regulator to 1075000 micro volts [0006.308] Found secure-pmc; disable BPMP U-Boot 2016.07-ge6da093be3 (Aug 03 2020 - 15:55:24 -0700) TEGRA210 Model: NVIDIA P3450-Porg Board: NVIDIA P3450-PORG DRAM: 4 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 SF: Detected MX25U3235F with page size 256 Bytes, erase size 4 KiB, total 4 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0