[0399.103] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses.
[0399.111] I> MB1 (prd-version: 1.5.1.7-t194-41334769-98030a79)
[0399.117] I> Boot-mode: Platform RCM
[0399.120] I> Chip revision : A02P
[0399.123] I> Bootrom patch version : 15 (correctly patched)
[0399.129] I> ATE fuse revision : 0x200
[0399.132] I> Ram repair fuse : 0x0
[0399.135] I> Ram Code : 0x2
[0399.138] I> rst_source : 0x0
[0399.140] I> rst_level : 0x0
[0399.144] I> USB configuration success
[0401.426] I> mb2 image downloaded
[0401.517] I> Recovery boot mode 0
[0401.521] I> Boot-device: eMMC
[0401.525] I> UPHY full init done
[0401.530] I> MB1 done

[0401.535] W> Profiler not initialized
[0401.538] I> Welcome to MB2(TBoot-BPMP) Applet (version: 00.00.2018.32-mobile-78b59fcb)
[0401.546] W> Profiler not initialized
[0401.550] I> DMA Heap @ [0x40020000 - 0x40065800]
[0401.554] I> Default Heap @ [0xd486400 - 0xd48a400]
[0401.559] W> Profiler not initialized
[0401.563] W> Profiler not initialized
[0401.566] E> DEVICE_PROD: Invalid value data = 0, size = 0.
[0401.572] W> device prod register failed
[0401.575] W> Profiler not initialized
[0401.631] I> sdmmc DDR50 mode
[0401.635] I> No supported QSPI flash found
[0401.639] E> QSPI Flash: Insufficient flash size (0 MB)
[0401.644] I> QSPI Flash is not present.
[0401.695] E> Link startup dme_set failed
[0401.699] E> UFS initialization failed
[0401.702] I> UFS is not present
[0401.705] W> Profiler not initialized
[0401.713] I> Found 17 partitions in SDMMC_BOOT (instance 3)
[0401.722] I> Found 42 partitions in SDMMC_USER (instance 3)
[0401.728] W> Profiler not initialized
[0401.731] W> Profiler not initialized
[0401.735] W> Profiler not initialized
[0401.738] I> Entering 3p server
[0401.742] I> USB configuration success
[0402.865] I> Populate chip info
[0402.954] I> Populate eeprom info
[0402.958] I> Populate eeprom info for module cvm
[0403.163] I> Rebooting : reboot-recovery


[040��
[0017.766] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses.
[0017.774] I> MB1 (prd-version: 1.5.1.7-t194-41334769-98030a79)
[0017.780] I> Boot-mode: RCM
[0017.782] I> Chip revision : A02P
[0017.785] I> Bootrom patch version : 15 (correctly patched)
[0017.791] I> ATE fuse revision : 0x200
[0017.794] I> Ram repair fuse : 0x0
[0017.797] I> Ram Code : 0x2
[0017.800] I> rst_source : 0xb
[0017.802] I> rst_level : 0x1
[0017.806] I> USB configuration success
[0019.901] I> bct_bootrom image downloaded
[0019.910] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT.
[0019.917] I> Temperature = 23500
[0019.920] W> Skipping boost for clk: BPMP_CPU_NIC
[0019.925] W> Skipping boost for clk: BPMP_APB
[0019.929] W> Skipping boost for clk: AXI_CBB
[0019.933] W> Skipping boost for clk: AON_CPU_NIC
[0019.937] W> Skipping boost for clk: CAN1
[0019.941] W> Skipping boost for clk: CAN2