=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.08.27 15:28:37 =~=~=~=~=~=~=~=~=~=~=~= [0000.355] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.374] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.380] W> No valid slot number is found in scratch register [0000.386] W> Return default slot: _a [0000.389] I> A/B: bin_type (16) slot 0 [0000.393] I> Loading partition bpmp-fw at 0xd7800000 [0000.397] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.403] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.428] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.434] W> No valid slot number is found in scratch register [0000.439] W> Return default slot: _a [0000.443] I> A/B: bin_type (17) slot 0 [0000.446] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.451] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.457] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.483] I> Binary(17) of size 604720 is loaded @ 0xd796c400 [0000.713] I> Loading SCE-FW ... [0000.716] W> No valid slot number is found in scratch register [0000.722] W> Return default slot: _a [0000.725] I> A/B: bin_type (12) slot 0 [0000.729] I> Loading partition sce-fw at 0xd7300000 [0000.734] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.739] I> Addr: 0xd7300000, start-block: 58784120, num_blocks: 1 [0000.758] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.764] I> Init SCE [0000.766] I> Loading APE-FW ... [0000.769] W> No valid slot number is found in scratch register [0000.775] W> Return default slot: _a [0000.778] I> A/B: bin_type (11) slot 0 [0000.782] I> Loading partition adsp-fw at 0xd7400000 [0000.787] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.792] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.811] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.817] I> Copy BTCM section [0000.820] W> No valid slot number is found in scratch register [0000.826] W> Return default slot: _a [0000.829] I> A/B: bin_type (13) slot 0 [0000.833] I> Loading partition cpu-bootloader at 0x96000000 [0000.838] I> Reading two headers - addr:0x96000000 blocks:1 [0000.844] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.865] I> Binary(13) of size 284816 is loaded @ 0x96000000 [0000.870] W> No valid slot number is found in scratch register [0000.876] W> Return default slot: _a [0000.879] I> A/B: bin_type (20) slot 0 [0000.883] I> Loading partition bootloader-dtb at 0x8520f400 [0000.888] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.894] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.914] I> Binary(20) of size 240128 is loaded @ 0x8520f400 [0000.920] W> No valid slot number is found in scratch register [0000.925] W> Return default slot: _a [0000.929] I> A/B: bin_type (14) slot 0 [0000.932] I> Loading partition secure-os at 0x8530f600 [0000.938] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.943] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.965] I> Binary(14) of size 366000 is loaded @ 0x8530f600 [0000.972] I> TOS boot-params @ 0x85000000 [0000.976] I> TOS params prepared [0000.979] I> Loading EKS ... [0000.982] I> A/B: bin_type (15) slot 0 [0000.986] I> Loading partition eks at 0x8590f800 [0000.990] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.996] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0001.014] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0001.020] I> EKB detected (length: 0x400) @ 0x8590f800 [0001.025] I> Copied encrypted keys [0001.029] I> boot profiler @ 0x275844000 [0001.032] I> boot profiler for TOS @ 0x275844000 [0001.037] I> Unhalting SCE [0001.040] I> Primary Memory Start:80000000 Size:70000000 [0001.045] I> Extended Memory Start:f0110000 Size:1856f0000 [0001.052] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 21:14:44, Jun 25 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete [0001.424] I> Welcome to Cboot [0001.427] I> Cboot Version: t186-02737b3e [0001.431] I> CPU-BL Params @ 0x275800000 [0001.435] I> 0) Base:0x00000000 Size:0x00000000 [0001.439] I> 1) Base:0x277f00000 Size:0x00100000 [0001.444] I> 2) Base:0x277e00000 Size:0x00100000 [0001.448] I> 3) Base:0x277d00000 Size:0x00100000 [0001.453] I> 4) Base:0x277c00000 Size:0x00100000 [0001.457] I> 5) Base:0x277b00000 Size:0x00100000 [0001.462] I> 6) Base:0x277800000 Size:0x00200000 [0001.466] I> 7) Base:0x277400000 Size:0x00400000 [0001.471] I> 8) Base:0x277a00000 Size:0x00100000 [0001.475] I> 9) Base:0x277300000 Size:0x00100000 [0001.480] I> 10) Base:0x276800000 Size:0x00800000 [0001.484] I> 11) Base:0x30000000 Size:0x00040000 [0001.489] I> 12) Base:0xf0000000 Size:0x00100000 [0001.493] I> 13) Base:0x30040000 Size:0x00001000 [0001.498] I> 14) Base:0x30048000 Size:0x00001000 [0001.502] I> 15) Base:0x30049000 Size:0x00001000 [0001.506] I> 16) Base:0x3004a000 Size:0x00001000 [0001.511] I> 17) Base:0x3004b000 Size:0x00001000 [0001.515] I> 18) Base:0x3004c000 Size:0x00001000 [0001.520] I> 19) Base:0x3004d000 Size:0x00001000 [0001.524] I> 20) Base:0x3004e000 Size:0x00001000 [0001.529] I> 21) Base:0x3004f000 Size:0x00001000 [0001.533] I> 22) Base:0x00000000 Size:0x00000000 [0001.537] I> 23) Base:0xf0100000 Size:0x00010000 [0001.542] I> 24) Base:0x00000000 Size:0x00000000 [0001.546] I> 25) Base:0x00000000 Size:0x00000000 [0001.551] I> 26) Base:0x00000000 Size:0x00000000 [0001.555] I> 27) Base:0x00000000 Size:0x00000000 [0001.560] I> 28) Base:0x84400000 Size:0x00400000 [0001.564] I> 29) Base:0x30000000 Size:0x00010000 [0001.568] I> 30) Base:0x278000000 Size:0x08000000 [0001.573] I> 31) Base:0x00000000 Size:0x00000000 [0001.577] I> 32) Base:0x276000000 Size:0x00600000 [0001.582] I> 33) Base:0x80000000 Size:0x70000000 [0001.586] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.591] I> 35) Base:0x00000000 Size:0x00000000 [0001.595] I> 36) Base:0x00000000 Size:0x00000000 [0001.600] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.604] I> 38) Base:0x84000000 Size:0x00400000 [0001.609] I> 39) Base:0x96000000 Size:0x02000000 [0001.613] I> 40) Base:0x85000000 Size:0x01200000 [0001.618] I> 41) Base:0x275800000 Size:0x00500000 [0001.622] I> 42) Base:0x00000000 Size:0x00000000 [0001.627] I> 43) Base:0x00000000 Size:0x00000000 [0001.631] GIC-SPI Target CPU: 4 [0001.634] Interrupts Init done [0001.637] calling constructors [0001.641] initializing heap [0001.643] initializing threads [0001.646] initializing timers [0001.650] creating bootstrap completion thread [0001.654] top of bootstrap2() [0001.657] CPU: ARM Cortex A57 [0001.661] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.666] initializing platform [0001.669] I> Bl_dtb @0x8520f400 [0001.672] I> gpio framework initialized [0001.677] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.686] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.694] I> GPIO framework and drivers are initialized. [0001.699] I> Boot-device: eMMC [0001.706] I> sdmmc bdev is already initialized [0001.737] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.754] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.759] W> opt-in fuse is not set, skip fuse_burning [0001.764] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.770] W> No valid slot number is found in scratch register [0001.776] W> Return default slot: _a [0001.779] I> A/B: bin_type (21) slot 0 [0001.783] I> Loading kernel-dtb from partition [0001.787] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.805] I> Kernel_dtb @0x80000000 [0001.808] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.816] E> I2C: slave not found in slaves. [0001.820] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0001.828] E> I2C_DEV: Failed to send register address 0x00000004. [0001.834] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0001.843] E> tca9539_device_init: failed to write polar reg [0001.848] E> tegrabl_tca9539_init: failed to init device! [0001.854] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.860] E> I2C: slave not found in slaves. [0001.864] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0001.872] E> I2C_DEV: Failed to send register address 0x00000004. [0001.878] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0001.887] E> tca9539_device_init: failed to write polar reg [0001.893] E> tegrabl_tca9539_init: failed to init device! [0001.900] I> fixed regulator driver initialized [0001.924] I> register 'maxim' power off handle [0001.929] I> virtual i2c enabled [0001.932] I> registered 'maxim,max77620' pmic [0001.936] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.946] I> Find /i2c@c250000's alias i2c7 [0001.950] I> Reading eeprom i2c=7 address=0x50 [0001.979] I> Device at /i2c@c250000:0x50 [0001.983] I> Reading eeprom i2c=7 address=0x57 [0001.987] E> I2C: slave not found in slaves. [0001.991] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.999] E> I2C_DEV: Failed to send register address 0x00000000. [0002.005] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0002.014] E> eeprom: Failed to read I2C slave device [0002.019] I> Eeprom read failed 0x3526070d [0002.024] I> Find /i2c@c240000's alias i2c1 [0002.028] I> Reading eeprom i2c=1 address=0x51 [0002.033] E> I2C: slave not found in slaves. [0002.037] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.045] E> I2C_DEV: Failed to send register address 0x00000000. [0002.051] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.060] E> eeprom: Retry to read I2C slave device. [0002.065] E> I2C: slave not found in slaves. [0002.069] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.077] E> I2C_DEV: Failed to send register address 0x00000000. [0002.083] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.092] E> eeprom: Failed to read I2C slave device [0002.097] I> Eeprom read failed 0x3526070d [0002.101] I> Find /i2c@3160000's alias i2c0 [0002.105] I> Reading eeprom i2c=0 address=0x50 [0002.110] E> I2C: slave not found in slaves. [0002.114] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.122] E> I2C_DEV: Failed to send register address 0x00000000. [0002.127] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0002.137] E> eeprom: Failed to read I2C slave device [0002.142] I> Eeprom read failed 0x3526070d [0002.146] I> Find /i2c@3180000's alias i2c2 [0002.150] I> Reading eeprom i2c=2 address=0x54 [0002.155] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.159] C> GPIO driver for chip_id 0x2 could not be found [0002.165] E> cam_eeprom_read: Can't get gpio driver [0002.169] I> Eeprom read failed 0x4d4d000d [0002.173] I> Reading eeprom i2c=2 address=0x57 [0002.178] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.182] C> GPIO driver for chip_id 0x2 could not be found [0002.188] E> cam_eeprom_read: Can't get gpio driver [0002.192] I> Eeprom read failed 0x4d4d000d [0002.196] I> create_pm_ids: id: 3310-1000-D00-F, len: 15 [0002.201] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.225] I> regulator 'vdd-hdmi' already enabled [0002.236] I> regulator 'vdd-hdmi' already enabled [0002.241] I> hdmi cable connected [0002.246] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts [0002.253] I> setting 'vdd-1v8' regulator to 1800000 micro volts [0002.261] E> cannot find any other nvdisp nodes [0002.268] E> I2C: slave not found in slaves. [0002.273] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.280] E> I2C_DEV: Failed to send register address 0x00000000. [0002.286] E> I2C_DEV: Could not read 128 registers of size 1 from slave 0xa0 at 0x00000000 via instance 3. [0002.296] E> could not read edid [0002.302] I> hdmi_enable, starting HDMI initialisation [0002.310] I> hdmi_enable, HDMI initialisation complete [0002.323] initializing target [0002.326] calling apps_init() [0002.329] starting app kernel_boot_app [0002.352] I> found decompressor handler: lz4-legacy [0002.357] I> decompressing BMP blob ... [0002.367] I> Kernel type = Normal [0002.370] I> Loading kernel-bootctrl from partition [0002.375] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0002.389] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0002.396] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.403] I> ########## Fixed storage boot ########## [0002.408] W> No valid slot number is found in scratch register [0002.414] W> Return default slot: _a [0002.417] I> A/B: bin_type (24) slot 0 [0002.433] I> Boot image size read from image header: 74aba [0002.438] I> Boot image load address: 0x80400000 [0002.442] I> Loading kernel from partition [0002.446] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.391] I> Validate kernel ... [0003.394] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0003.401] I> kernel-dtb is already loaded [0003.405] I> Validate kernel-dtb ... [0003.408] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.416] I> Checking boot.img header magic ... [0003.420] I> [OK] [0003.422] I> Kernel hdr @0x80400000 [0003.425] I> Kernel dtb @0x80000000 [0003.428] I> decompressor handler not found [0003.432] I> Copying kernel image (477882 bytes) from 0x80400800 to 0x80600000 ... [0003.440] I> Done [0003.442] I> Move ramdisk (len: 0) from 0x80475800 to 0x947b0000 [0003.448] I> Updated bpmp info to DTB [0003.453] I> Ramdisk: Base: 0x947b0000; Size: 0x0 [0003.458] I> Updated initrd info to DTB [0003.461] W> WARN: Fail to override "console=none" in commandline [0003.467] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.475] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.482] I> disabled_core_mask: 0xffffff0c [0003.486] W> No valid slot number is found in scratch register [0003.491] W> Return default slot: _a [0003.495] I> Active slot suffix: [0003.498] I> add_boot_slot_suffix: slot_suffix = [0003.503] I> Linux Cmdline: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0003.552] I> Updated bootarg info to DTB [0003.556] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:df:cb:df [0003.562] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:df:cb:e0 [0003.568] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:df:cb:e1 [0003.574] E> Found no plugin manager ids in source DT [0003.579] W> Add plugin manager ids from board info [0003.584] W> "plugin-manager" doesn't exist, creating [0003.589] W> "ids" doesn't exist, creating [0003.593] W> "connection" doesn't exist, creating [0003.598] W> "configs" doesn't exist, creating [0003.602] I> create_pm_ids: id: 3310-1000-D00-F, len: 15 [0003.607] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.618] I> Adding plugin-manager/ids/3310-1000-D00=/i2c@c250000:module@0x50 [0003.625] W> "i2c@c250000" doesn't exist, creating [0003.630] W> "module@0x50" doesn't exist, creating [0003.636] I> Adding plugin-manager/ids/3310-1000-D00-F [0003.642] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.647] I> Adding plugin-manager/configs/3310-power-config 00 [0003.653] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.659] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.665] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.671] I> Adding plugin-manager/configs/3310-display-config 00 [0003.677] I> Adding plugin-manager/cvm [0003.681] W> "chip-id" doesn't exist, creating [0003.685] I> Adding plugin-manager/chip-id/A02P [0003.690] W> "odm-data" doesn't exist, creating [0003.694] I> Adding /chosen/plugin-manager/odm-data [0003.702] I> added [base:0x80000000, size:0x70000000] to /memory [0003.708] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.714] I> added [base:0x275e00000, size:0x200000] to /memory [0003.720] I> added [base:0x276600000, size:0x200000] to /memory [0003.726] I> added [base:0x277000000, size:0x200000] to /memory [0003.731] I> Updated memory info to DTB [0003.735] E> add_disp_param: failed to get display params for du=1 [0003.742] W> "reset" doesn't exist, creating [0003.747] W> "pmc-reset-reason" doesn't exist, creating [0003.752] W> "pmic-reset-reason" doesn't exist, creating [0003.758] I> Adding ecid(00000001645cf3090000000006fd02c0) to DT [0003.764] I> disabled_core_mask: 0xffffff0c [0003.773] I> Add serial number:1422719051358 as DT property [0003.781] I> Plugin-manager override starting [0003.786] I> node /plugin-manager/fragement@0 matches [0003.794] I> node /plugin-manager/fragement@4 matches [0003.803] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.818] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.827] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.835] I> node /plugin-manager/fragment-devslp@0 matches [0003.845] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.856] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.863] I> node /plugin-manager/fragment-p3310-c01 matches [0003.871] I> node /plugin-manager/fragment-p3310-c03 matches [0003.886] I> Disable plugin-manager status in FDT [0003.891] I> Plugin-manager override finished successfully [0003.896] I> tegrabl_load_kernel_and_dtb: Done [0003.941] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2016.07-ge6da093be3 (Jun 25 2020 - 21:14:32 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 2 1 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 890 bytes read in 301 ms (2 KiB/s) 1:primary kernel Retrieving file: /boot/initrd 5565615 bytes read in 467 ms (11.4 MiB/s) Retrieving file: /boot/Image 34330632 bytes read in 1149 ms (28.5 MiB/s) append: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 Retrieving file: /boot/tegra186-tx2-cti-ASG016-IMX274.dtb 253172 bytes read in 473 ms (522.5 KiB/s) ## Flattened Device Tree blob at 88400000 Booting using the fdt blob at 0x88400000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000088400000, end 0000000088440cf3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (root@tx1-dev2) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Aug 5 17:13:19 EDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@9607d000 [ 0.000000] Found lut_mem2: 00002008@9607a000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f7036000 s61656 r8192 d32552 u102400 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29072(88%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7961540K/8220672K available (15294K kernel code, 2934K rwdata, 6688K rodata, 8576K init, 609K bss, 193596K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a13d808 - 0xffffff800a1d5f7c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009397] Console: colour dummy device 80x25 [ 0.014058] console [tty0] enabled [ 0.017614] bootconsole [uart8250] disabled [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (root@tx1-dev2) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Aug 5 17:13:19 EDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@9607d000 [ 0.000000] Found lut_mem2: 00002008@9607a000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f7036000 s61656 r8192 d32552 u102400 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29072(88%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7961540K/8220672K available (15294K kernel code, 2934K rwdata, 6688K rodata, 8576K init, 609K bss, 193596K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a13d808 - 0xffffff800a1d5f7c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009397] Console: colour dummy device 80x25 [ 0.014058] console [tty0] enabled [ 0.017614] bootconsole [uart8250] disabled [ 0.021988] kmemleak: Kernel memory leak detector disabled [ 0.022004] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022018] pid_max: default: 32768 minimum: 301 [ 0.022330] Security Framework initialized [ 0.022490] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022501] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023114] ftrace: allocating 47104 entries in 185 pages [ 0.146533] sched-energy: Sched-energy-costs installed from DT [ 0.146554] ASID allocator initialised with 65536 entries [ 0.181497] tegra-id: chipid=21817. [ 0.181512] tegra-id: opt_subrevision=1. [ 0.181535] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.181548] DTS File Name: tegra186-tx2-cti-ASG016-IMX274.dts [ 0.181559] DTB Build time: Aug 5 2020 17:21:12 [ 0.229935] CPU1: Booted secondary processor [4e0f0030] [ 0.261574] CPU2: Booted secondary processor [4e0f0030] [ 0.293365] CPU3: Booted secondary processor [411fd073] [ 0.325343] CPU4: Booted secondary processor [411fd073] [ 0.357338] CPU5: Booted secondary processor [411fd073] [ 0.357391] Brought up 6 CPUs [ 0.357426] SMP: Total of 6 processors activated. [ 0.357439] CPU features: detected feature: 32-bit EL0 Support [ 0.358180] CPU: All CPU(s) started at EL2 [ 0.358239] alternatives: patching kernel code [ 0.367746] devtmpfs: initialized [ 0.392799] Initilizing CustomIPI irq domain [ 0.393035] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.393062] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.393932] pinctrl core: initialized pinctrl subsystem [ 0.394131] OS set in device tree is not L4T. [ 0.394284] regulator-dummy: no parameters [ 0.394420] Initializing plugin-manager [ 0.394479] Plugin module not found [ 0.394874] node /plugin-manager/fragement@0 match with odm-data enable-denver-wdt [ 0.395540] node /plugin-manager/fragement@4 match with odm-data enable-denver-wdt [ 0.396653] node /plugin-manager/fragment-sdwake-p3310-1000-300 match with board >=3310-1000-300 [ 0.397016] node /plugin-manager/fragement-pmon-p3310-1000-300 match with board >=3310-1000-300 [ 0.397275] node /plugin-manager/fragement-pmon-p3310-1000-800 match with board >=3310-1000-800 [ 0.397489] node /plugin-manager/fragment-devslp@0 match with board >=3310-1000-200 [ 0.398059] node /plugin-manager/fragment-p3310-c00-comm match with board >=3310-1000-800 [ 0.398297] node /plugin-manager/fragment-p3310-c00-pmic match with board >=3310-1000-800 [ 0.398504] node /plugin-manager/fragment-p3310-c01 match with board >=3310-1000-900 [ 0.398742] node /plugin-manager/fragment-p3310-c03 match with board >=3310-1000-B00 [ 0.400617] NET: Registered protocol family 16 [ 0.401448] pstore: using zlib compression [ 0.401880] console [pstore-1] enabled [ 0.401892] pstore: Registered ramoops as persistent store backend [ 0.401905] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.420952] cpuidle: using governor menu [ 0.421934] bpmp: waiting for handshake [ 0.421949] bpmp: handshake completed [ 0.421972] bpmp: synchronizing channels [ 0.421988] bpmp: channels synchronized [ 0.422000] bpmp: mail init ok [ 0.423528] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.423547] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.423561] arm-smmu 12000000.iommu: stage 1 translation [ 0.423574] arm-smmu 12000000.iommu: stage 2 translation [ 0.423586] arm-smmu 12000000.iommu: nested translation [ 0.423600] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.423619] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.423637] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.423652] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.423665] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.425508] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000) [ 0.425539] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.428207] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.429296] Registering BPMP clocks... [ 0.429395] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.429883] Serial: AMBA PL011 UART driver [ 0.431019] tegra_powergate_init: DONE [ 0.431038] DTS File Name: tegra186-tx2-cti-ASG016-IMX274.dts [ 0.431054] DTB Build time: Aug 5 2020 17:21:12 [ 0.432366] Tegra reboot handler registered. [ 0.433586] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.433661] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.433684] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.433696] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.433707] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.433876] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.433902] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.434196] iommu: Adding device 3460000.sdhci to group 0 [ 0.434825] iommu: Adding device 3400000.sdhci to group 1 [ 0.435843] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.435870] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.436280] iommu: Adding device 3160000.i2c to group 3 [ 0.436686] iommu: Adding device c240000.i2c to group 4 [ 0.437004] iommu: Adding device 3180000.i2c to group 5 [ 0.437314] iommu: Adding device 3190000.i2c to group 6 [ 0.437770] iommu: Adding device 31b0000.i2c to group 7 [ 0.438080] iommu: Adding device 31c0000.i2c to group 8 [ 0.438388] iommu: Adding device c250000.i2c to group 9 [ 0.438696] iommu: Adding device 31e0000.i2c to group 10 [ 0.440124] iommu: Adding device 3210000.spi to group 11 [ 0.440435] iommu: Adding device c260000.spi to group 12 [ 0.441087] iommu: Adding device 3100000.serial to group 13 [ 0.441431] iommu: Adding device 3110000.serial to group 14 [ 0.441748] iommu: Adding device c280000.serial to group 15 [ 0.442050] iommu: Adding device 3130000.serial to group 16 [ 0.443240] iommu: Adding device 2490000.ether_qos to group 17 [ 0.443265] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.443906] iommu: Adding device b000000.rtcpu to group 18 [ 0.445789] iommu: Adding device 13e10000.host1x to group 19 [ 0.446089] iommu: Adding device 13e10000.host1x:ctx0 to group 20 [ 0.446385] iommu: Adding device 13e10000.host1x:ctx1 to group 21 [ 0.446685] iommu: Adding device 13e10000.host1x:ctx2 to group 22 [ 0.446993] iommu: Adding device 13e10000.host1x:ctx3 to group 23 [ 0.447293] iommu: Adding device 13e10000.host1x:ctx4 to group 24 [ 0.447587] iommu: Adding device 13e10000.host1x:ctx5 to group 25 [ 0.447892] iommu: Adding device 13e10000.host1x:ctx6 to group 26 [ 0.448189] iommu: Adding device 13e10000.host1x:ctx7 to group 27 [ 0.448631] iommu: Adding device 150c0000.nvcsi to group 28 [ 0.449221] iommu: Adding device 15700000.vi to group 29 [ 0.449606] iommu: Adding device 15600000.isp to group 30 [ 0.450052] iommu: Adding device 15210000.nvdisplay to group 31 [ 0.450312] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x967f5c00, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.450360] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x967fbf80, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.450405] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96801e80, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.450450] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96807b40, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.450493] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9680d5c0, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.450536] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96812780, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.450580] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96817fc0, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.450585] iommu: Adding device 15340000.vic to group 32 [ 0.450633] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9681f140, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.450675] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96824840, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.450718] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96829d00, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 0.450788] iommu: Adding device 154c0000.nvenc to group 33 [ 0.451011] iommu: Adding device 15480000.nvdec to group 34 [ 0.451340] iommu: Adding device 15380000.nvjpg to group 35 [ 0.451557] iommu: Adding device 15500000.tsec to group 36 [ 0.451784] iommu: Adding device 15100000.tsecb to group 37 [ 0.452420] iommu: Adding device 15810000.se to group 38 [ 0.452628] iommu: Adding device 15820000.se to group 39 [ 0.452842] iommu: Adding device 15830000.se to group 40 [ 0.453055] iommu: Adding device 15840000.se to group 41 [ 0.453902] iommu: Adding device smmu_test to group 42 [ 0.454484] mc: mapped MMIO address: 0xffffff800a6c0000 -> 0x2c10000 [ 0.454509] mc: mapped MMIO address: 0xffffff800a6e0000 -> 0x2c20000 [ 0.454531] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c30000 [ 0.454552] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c40000 [ 0.454572] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2c50000 [ 0.454589] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.454610] mc-err: mcerr ops are set to t18x [ 0.454695] random: fast init done [ 0.454965] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.457804] iommu: Adding device 3530000.xhci to group 43 [ 0.457903] arm-smmu: forcing sodev map for 3530000.xhci [ 0.458866] iommu: Adding device 3550000.xudc to group 44 [ 0.458918] arm-smmu: forcing sodev map for 3550000.xudc [ 0.460180] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.460222] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.461060] iommu: Adding device 17000000.gp10b to group 45 [ 0.467933] mc-err: (255) csr_nvdisplayr: EMEM address decode error [ 0.467975] mc-err: status = 0x20367092; addr = 0x3ffffffc0 [ 0.468010] mc-err: secure: yes, access-type: read [ 0.468057] mc-err: unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 0.468137] mc-err: (255) csr_nvdisplayr: EMEM address decode error [ 0.468170] mc-err: status = 0x20327092; addr = 0x3ffffffc0 [ 0.468210] mc-err: secure: yes, access-type: read [ 0.468250] mc-err: unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000000, hubc_int_status=0x00000000 [ 0.468307] mc-err: Too many MC errors; throttling prints [ 0.468380] tegra-reset 5000000.clock: registered 193 resets. [ 0.471491] iommu: Adding device d000000.bpmp to group 46 [ 0.471872] bpmp: ping status is 0 [ 0.484709] bpmp d000000.bpmp: firmware tag is 4208eb5c85fe47a2235fbc0b8eb87dca [ 0.534668] bpmp d000000.bpmp: probe ok [ 0.601688] iommu: Adding device 2600000.dma to group 47 [ 0.634779] GPIO line 334 (e3325_sdio_rst) hogged as output/high [ 0.634825] GPIO line 332 (e3325_lane0_mux) hogged as output/low [ 0.634865] GPIO line 424 (wifi-enable) hogged as output/high [ 0.635061] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.635101] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.635147] GPIO line 461 (camera-control-output-low) hogged as output/low [ 0.635187] GPIO line 456 (camera-control-output-low) hogged as output/low [ 0.635389] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.718460] random: crng init done [ 0.735342] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.735626] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.738655] iommu: Adding device 10003000.pcie-controller to group 48 [ 0.738715] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.739177] iommu: Adding device sound to group 49 [ 0.739617] iommu: Adding device 3510000.hda to group 50 [ 0.856864] iommu: Adding device c1a0000.aon to group 51 [ 0.857629] vdd-ac-bat: 5000 mV [ 0.861249] vdd-1v8-ap: 1800 mV [ 0.938632] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.953194] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.953874] SCSI subsystem initialized [ 0.954764] usbcore: registered new interface driver usbfs [ 0.954887] usbcore: registered new interface driver hub [ 0.955055] usbcore: registered new device driver usb [ 1.218675] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 1.285391] vddio-ddr: at 1125 mV [ 1.305966] avdd_dsi_csi: 1200 mV [ 1.337962] vdd-1v8: 1800 mV [ 1.373973] vdd-3v3-sys: 3300 mV [ 1.402560] spmic-ldo0: at 1800 mV [ 1.419264] spmic-ldo1: at 800 mV [ 1.437973] vddio-3v3: 3300 mV [ 1.452943] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 1.473976] vdd-rtc: at 800 mV [ 1.486309] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 1.505972] spmic-ldo6: at 1500 mV [ 1.521963] vdd-pex-1v00: 1000 mV [ 1.536142] dvdd-pex: 1000 mV [ 1.586013] GPIO line 253 (spmic_gpio_input) hogged as input [ 1.586221] GPIO line 254 (spmic_gpio_input) hogged as input [ 1.586593] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 1.586867] max77620 4-003c: max77620 probe successful [ 1.587378] media: Linux media interface: v0.10 [ 1.587452] Linux video capture interface: v2.00 [ 1.619890] pps_core: LinuxPPS API ver. 1 registered [ 1.619942] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.620022] PTP clock support registered [ 1.620306] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 1.620745] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 1.620814] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 1.627250] trusty trusty: trusty version: Built: 21:16:26 Jun 25 2020 [ 1.627330] trusty trusty: selected api version: 3 (requested 3) [ 1.628365] Advanced Linux Sound Architecture Driver Initialized. [ 1.628848] Bluetooth: Core ver 2.22 [ 1.628916] NET: Registered protocol family 31 [ 1.628948] Bluetooth: HCI device and connection manager initialized [ 1.628990] Bluetooth: HCI socket layer initialized [ 1.629026] Bluetooth: L2CAP socket layer initialized [ 1.629076] Bluetooth: SCO socket layer initialized [ 1.630013] en-vdd-sd: 3300 mV [ 1.630307] en-vdd-cam: 1800 mV [ 1.630589] vdd-hdmi: 5000 mV [ 1.630977] vdd-usb0-5v: 5000 mV [ 1.631326] vdd-usb1-5v: 5000 mV [ 1.631593] en-vdd-ts-1v8: 1800 mV [ 1.631878] en-vdd-ts-hv-3v3: 3300 mV [ 1.632174] en-vdd-disp-3v3: 3300 mV [ 1.632441] en-mdm-pwr-3v7: 3700 mV [ 1.632746] en-vdd-disp-1v8: 1800 mV [ 1.633064] en-vdd-cam-hv-2v8: 2800 mV [ 1.633379] en-vdd-cam-1v2: 1200 mV [ 1.633724] vdd-fan: 5000 mV [ 1.634040] vdd-3v3: 3300 mV [ 1.634378] dis-vdd-1v2: 1200 mV [ 1.634696] en-vdd-vcm-2v8: 2800 mV [ 1.634992] vdd-usb2-5v: 5000 mV [ 1.635320] vdd-sys-bl: 3300 mV [ 1.635650] en-vdd-sys: 1200 mV [ 1.669968] camchar: rtcpu character device driver loaded [ 1.670807] gpio tegra-gpio wake53 for gpio=159(X:7) [ 1.719192] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 5.452965] __arm_smmu_context_fault: 221463 callbacks suppressed [ 5.452976] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966c9480, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.453042] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966d3280, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.453088] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966d8f80, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.453133] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966de780, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.453176] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966e45c0, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.453219] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966e9b00, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.453263] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966ef240, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.453306] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966f4b00, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.453349] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966fa4c0, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 5.453392] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x966ffdc0, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 8.876833] irq 65: nobody cared (try booting with the "irqpoll" option) [ 8.876850] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.140-tegra #1 [ 8.876864] Hardware name: quill (DT) [ 8.876876] Call trace: [ 8.876895] [] dump_backtrace+0x0/0x198 [ 8.876910] [] show_stack+0x24/0x30 [ 8.876926] [] dump_stack+0x98/0xc0 [ 8.876942] [] __report_bad_irq+0x3c/0xf8 [ 8.876957] [] note_interrupt+0x2c8/0x318 [ 8.876971] [] handle_irq_event_percpu+0x50/0x60 [ 8.876984] [] handle_irq_event+0x50/0x80 [ 8.876998] [] handle_fasteoi_irq+0xc8/0x1b8 [ 8.877012] [] generic_handle_irq+0x34/0x50 [ 8.877025] [] __handle_domain_irq+0x68/0xc0 [ 8.877038] [] gic_handle_irq+0x5c/0xb0 [ 8.877051] [] el1_irq+0xe8/0x194 [ 8.877065] [] irq_exit+0xd0/0x118 [ 8.877078] [] __handle_domain_irq+0x6c/0xc0 [ 8.877090] [] gic_handle_irq+0x5c/0xb0 [ 8.877103] [] el1_irq+0xe8/0x194 [ 8.877117] [] arch_cpu_idle+0x30/0x1b0 [ 8.877131] [] cpu_startup_entry+0x140/0x200 [ 8.877146] [] rest_init+0x84/0x90 [ 8.877162] [] start_kernel+0x370/0x384 [ 8.877175] [] __primary_switched+0x80/0x94 [ 8.877186] handlers: [ 8.877200] [] tegra_mcerr_hard_irq threaded [] tegra_mcerr_thread [ 8.877225] Disabling IRQ #65 [ 8.893062] clocksource: Switched to clocksource arch_sys_counter [ 8.933150] VFS: Disk quotas dquot_6.6.0 [ 8.933461] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 8.943233] tegra-pcie 10003000.pcie-controller: wrong configuration updated in DT, switching to default 2x1, 1x1, 1x1 configuration [ 8.944087] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.944896] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 8.944940] nvmap_page_pool_init: Total RAM pages: 2006769 [ 8.944974] nvmap_page_pool_init: nvmap page pool size: 250846 pages (979 MB) [ 8.945109] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.963353] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 8.975790] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 8.976008] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 8.976380] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 8.976511] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 8.976677] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 8.976841] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 8.977111] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 8.977460] la/ptsa driver initialized. [ 8.977499] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 8.977533] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 8.978692] NET: Registered protocol family 2 [ 8.980694] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 8.981380] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 8.982222] TCP: Hash tables configured (established 65536 bind 65536) [ 8.982323] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 8.982485] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 8.983398] NET: Registered protocol family 1 [ 8.984497] RPC: Registered named UNIX socket transport module. [ 8.984538] RPC: Registered udp transport module. [ 8.984568] RPC: Registered tcp transport module. [ 8.984598] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.985020] Trying to unpack rootfs image as initramfs... [ 8.993530] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 9.043497] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 9.149795] Freeing initrd memory: 5432K [ 9.198555] host1x 13e10000.host1x: initialized [ 9.200105] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 9.204035] audit: initializing netlink subsys (disabled) [ 9.204104] audit: type=2000 audit(9.088:1): initialized [ 9.204830] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 9.220664] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 9.223427] ntfs: driver 2.1.32 [Flags: R/W]. [ 9.224994] 9p: Installing v9fs 9p2000 file system support [ 9.231150] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 9.231362] io scheduler noop registered [ 9.232022] io scheduler cfq registered (default) [ 9.277466] gic 2a41000.agic-controller: GIC IRQ controller registered [ 10.461459] __arm_smmu_context_fault: 218799 callbacks suppressed [ 10.461469] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9607a000, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.461541] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9608d840, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.462130] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x96096e00, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.462175] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x9609c8c0, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.462220] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960a2500, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.462264] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960a7d80, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.462309] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960ad940, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.462353] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960b3140, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.462397] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960b8d00, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 10.462442] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x960be500, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 11.562972] iommu: Adding device aconnect@2a41000:adsp_audio to group 52 [ 12.313690] iommu: Adding device 2993000.adsp to group 53 [ 12.330651] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 12.364817] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 12.430881] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 12.463938] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 12.497177] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 12.530338] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 12.548518] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 12.548742] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 12.548791] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=1500000, max_bw=4687500 [ 12.580470] tsec 15500000.tsec: initialized [ 12.597772] tsec 15100000.tsecb: initialized [ 12.630757] nvdec 15480000.nvdec: initialized [ 12.696992] falcon 15340000.vic: initialized [ 12.730540] falcon 154c0000.nvenc: initialized [ 12.763797] falcon 15380000.nvjpg: initialized [ 12.768453] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 12.770247] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 12.771977] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 12.773660] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 12.775393] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 12.777018] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 12.778647] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 12.780193] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 12.783516] tegradccommon 15200000.dc_common: host1x channel mapped [ 12.783563] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 12.783634] tegradccommon 15200000.dc_common: dma mapping done [ 12.784689] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 12.784768] generic_infoframe_type: 0x87 [ 12.784858] tegradc 15210000.nvdisplay: DT parsed successfully [ 12.784911] tegradc 15210000.nvdisplay: Display dc.ffffff800b650000 registered with id=0 [ 12.785630] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=389 [ 12.796973] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 12.880388] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 12.880450] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 12.880493] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 12.880505] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 12.880529] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 12.880846] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 12.880882] tegra_cec 3960000.tegra_cec: probed [ 12.880895] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 12.880904] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 12.882141] of_fixed_clk: probe of can_clock failed with error -17 [ 13.002824] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 13.002878] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 13.003728] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 13.030798] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 13.030864] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 13.031417] kfuse 3830000.kfuse: initialized [ 13.032036] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 13.032933] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 13.035816] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 13.064749] console [ttyS0] disabled [ 13.064840] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 35, base_baud = 25500000) is a Tegra [ 13.114681] tegradc 15210000.nvdisplay: probed [ 13.903145] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 13.903152] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 15.465067] __arm_smmu_context_fault: 213755 callbacks suppressed [ 15.465077] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x967cb7c0, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 15.465111] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x967d0800, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 15.465138] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x967d4c40, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 15.465165] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x967d7f40, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 15.465193] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x967db3c0, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 15.465220] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x967df040, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 15.465246] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x967e2380, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 15.465273] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x967e5dc0, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 15.465299] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x967e9180, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 15.465326] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x967ebfc0, fsynr=0x1, cb=15, sid=9(0x9 - NVDISPLAY), pgd=0, pud=0, pmd=0, pte=0 [ 16.211974] console [ttyS0] enabled [ 16.212493] Console: switching to colour frame buffer device 80x30 [ 16.222441] tegradc 15210000.nvdisplay: fb registered [ 16.228336] gpio tegra-gpio wake21 for gpio=121(P:1) [ 16.234439] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 16.250452] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 16.251024] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 36, base_baud = 0) is a TEGRA_UART [ 16.267115] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 16.267922] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 16.268219] serial-tegra 3130000.serial: RX in PIO mode [ 16.300532] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 16.310634] [drm] Initialized [ 16.323855] Parent Clock set for DC plld2 [ 16.325014] brd: module loaded [ 16.330278] loop: module loaded [ 16.330404] tegra_profiler: version: 1.141, samples/io: 48/28 [ 16.330546] tegra_profiler: auth: init [ 16.330902] nct1008_nct72 7-004c: starting parse dt [ 16.330987] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 16.330992] nct1008_nct72 7-004c: success parsing dt [ 16.331126] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 16.331715] THERMAL EST: found 3 subdevs [ 16.331720] THERMAL EST num_resources: 0 [ 16.331724] [THERMAL EST subdev 0] [ 16.331730] [THERMAL EST subdev 1] [ 16.331734] [THERMAL EST subdev 2] [ 16.332206] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 16.332210] THERMAL EST: thz register success. [ 16.332355] THERMAL EST: end of probe, return err: 0 [ 16.333893] sd: No Scsi addr parsed to reserve index [ 16.333968] hisi_sas: driver version v1.6 [ 16.363621] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 16.364264] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 16.397223] nct1008_nct72 7-004c: initial LOC temp: 37000 [ 16.397580] nct1008_nct72 7-004c: initial EXT temp: 52250 [ 16.398261] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 16.398684] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 16.398904] nct1008_nct72 7-004c: nct1008_probe: initialized [ 16.401300] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 16.401310] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 16.402545] scsi host0: tegra_ahci [ 16.403715] scsi host1: tegra_ahci [ 16.403955] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 16.403960] ata2: DUMMY [ 16.440099] libphy: Fixed MDIO Bus: probed [ 16.442348] tun: Universal TUN/TAP device driver, 1.6 [ 16.442352] tun: (C) 1999-2004 Max Krasnyansky [ 16.443786] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 16.443790] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 16.443882] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 16.443885] igb: Copyright (c) 2007-2014 Intel Corporation. [ 16.443970] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 16.443973] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 16.444067] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 16.444070] Copyright(c) 1999 - 2017 Intel Corporation. [ 16.453162] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 16.518404] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b df cb e1 [ 16.518581] libphy: dwc_phy: probed [ 16.519020] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 16.552010] PPP generic driver version 2.4.2 [ 16.552287] PPP BSD Compression module registered [ 16.552292] PPP Deflate Compression module registered [ 16.552312] PPP MPPE Compression module registered [ 16.552316] NET: Registered protocol family 24 [ 16.552413] usbcore: registered new interface driver r8152 [ 16.552496] usbcore: registered new interface driver asix [ 16.552578] usbcore: registered new interface driver ax88179_178a [ 16.552659] usbcore: registered new interface driver cdc_ether [ 16.552740] usbcore: registered new interface driver net1080 [ 16.552817] usbcore: registered new interface driver cdc_subset [ 16.552892] usbcore: registered new interface driver zaurus [ 16.552978] usbcore: registered new interface driver cdc_ncm [ 16.553433] VFIO - User Level meta-driver version: 0.3 [ 16.555187] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 16.555214] ehci-pci: EHCI PCI platform driver [ 16.555301] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 16.555310] ohci-pci: OHCI PCI platform driver [ 16.555527] ohci-platform: OHCI generic platform driver [ 16.602227] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 16.651313] tegra-xusb 3530000.xhci: extcon 0: ffffffc1eb23fc00 id [ 16.652204] usbcore: registered new interface driver uas [ 16.652300] usbcore: registered new interface driver usb-storage [ 16.652514] usbcore: registered new interface driver usbserial [ 16.653084] tegra-xusb 3530000.xhci: Firmware timestamp: 2019-10-31 05:52:15 UTC, Version: 55.17 release [ 16.668704] tegra-xudc-new 3550000.xudc: device count: 1 [ 16.685106] tegra-xusb 3530000.xhci: xHCI Host Controller [ 16.685128] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 16.685868] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 16.685921] tegra-xusb 3530000.xhci: irq 69, io mem 0x03530000 [ 16.686172] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 16.686179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.686184] usb usb1: Product: xHCI Host Controller [ 16.686188] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 16.686192] usb usb1: SerialNumber: 3530000.xhci [ 16.686676] hub 1-0:1.0: USB hub found [ 16.686773] hub 1-0:1.0: 4 ports detected [ 16.687171] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 16.687190] tegra-xudc-new 3550000.xudc: entering ELPG [ 16.687411] tegra-xusb 3530000.xhci: xHCI Host Controller [ 16.687422] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 16.687806] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 16.687812] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.687817] usb usb2: Product: xHCI Host Controller [ 16.687821] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 16.687825] usb usb2: SerialNumber: 3530000.xhci [ 16.701214] hub 2-0:1.0: USB hub found [ 16.701243] mousedev: PS/2 mouse device common for all mice [ 16.701254] hub 2-0:1.0: 3 ports detected [ 16.701308] usbcore: registered new interface driver xpad [ 16.701531] tegra-xudc-new 3550000.xudc: entering ELPG done [ 16.719381] ata1: SATA link down (SStatus 0 SControl 300) [ 16.867821] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 16.870850] edid invalid [ 16.879215] Wake73 for irq=42 [ 16.883881] rtc rtc1: alarm rtc device [ 16.887681] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 16.894691] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 16.901001] i2c /dev entries driver [ 16.907198] pca9570 2-0024: pca9570_icr_move, forward val=5 [ 16.921062] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 16.927620] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 17.023249] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.029580] usb 1-2: new low-speed USB device number 2 using tegra-xusb [ 17.033055] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.033061] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 17.033067] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable [ 17.058643] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 17.065601] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.072015] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 17.082101] usb 1-2: New USB device found, idVendor=413c, idProduct=301a [ 17.088838] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 17.095993] usb 1-2: Product: Dell MS116 USB Optical Mouse [ 17.101500] usb 1-2: Manufacturer: PixArt [ 17.140692] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 17.151063] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 17.161461] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 17.171823] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 17.182178] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 17.188923] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.192614] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 17.196703] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 17.200810] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 17.204897] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 17.208953] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 17.209544] tegradc 15210000.nvdisplay: hdmi: edid read failed [ 17.209650] tegradc 15210000.nvdisplay: hdmi: using fallback edid [ 17.226670] usb 1-3: new low-speed USB device number 3 using tegra-xusb [ 17.245365] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 17.245400] tegradc 15210000.nvdisplay: blank - powerdown [ 17.245464] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.245499] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 17.258006] usb 1-3: New USB device found, idVendor=413c, idProduct=2113 [ 17.258014] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 17.258018] usb 1-3: Product: Dell KB216 Wired Keyboard [ 17.266863] tegradc 15210000.nvdisplay: unblank [ 17.267217] Parent Clock set for DC plld2 [ 17.321073] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.321079] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 17.355665] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.355708] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 17.355804] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.355843] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 17.373053] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.373058] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 17.425068] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.425075] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 17.465990] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.466032] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 17.466120] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.466177] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 17.477051] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 17.477057] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 17.477062] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable [ 17.477086] tegradc 15210000.nvdisplay: update windows ret = -14 [ 17.477091] tegradc 15210000.nvdisplay: sync windows ret = -14 [ 17.576321] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.576358] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 17.576446] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.576479] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 17.686624] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.686660] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 17.686744] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.686809] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 17.751640] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 17.760524] Extcon HDMI: HPD enabled [ 17.765770] tegradc 15210000.nvdisplay: hdmi: plugged [ 17.793148] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.801178] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 17.809716] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.817673] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 17.936148] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.944156] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 17.952703] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 17.960646] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 18.082978] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 18.093024] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 18.101581] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 18.109547] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 18.228036] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 18.236026] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 18.244598] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 18.252607] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 18.261045] pca9570 2-0024: pca9570_icr_move:i2c write failed [ 18.268633] pca9570: probe of 2-0024 failed with error -121 [ 18.276873] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 18.290542] parse_throttle_dt_data: Num cap clks = 4 [ 18.297273] parse_throttle_dt_data: clk=mcpu type=1 [ 18.303849] parse_throttle_dt_data: clk=bcpu type=2 [ 18.310409] parse_throttle_dt_data: clk=gpu type=4 [ 18.316869] parse_throttle_dt_data: clk=emc type=3 [ 18.324306] tegra_throttle_probe: probe successful. #cdevs=4 [ 18.332357] FAN dev name: pwm-fan [ 18.337308] FAN:gpio request success. [ 18.342523] FAN: can't find tach_gpio [ 18.347765] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 18.355211] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 18.363534] pwm_fan_driver pwm-fan: tach period: 1000 [ 18.370855] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 18.379963] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 18.389258] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 18.398648] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 18.408365] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 18.417680] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 18.426958] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 18.436204] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 18.445430] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 18.454728] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 18.465916] device-mapper: uevent: version 1.0.3 [ 18.472737] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 18.482916] CPU EMC frequency mapping table: default setting [ 18.494416] cpufreq: platform driver Initialization: pass [ 18.501374] cpuidle: Initializing cpuidle driver init for Denver cluster [ 18.509136] cpuidle: Initializing cpuidle driver init for A57 cluster [ 18.518293] sdhci: Secure Digital Host Controller Interface driver [ 18.525367] sdhci: Copyright(c) Pierre Ossman [ 18.530609] sdhci-pltfm: SDHCI platform and OF driver helper [ 18.538698] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 18.548656] CMDQ: cmdq_platfm_init successful [ 18.555025] CQE: CMD_TIMING bit set for R1B DCMD [ 18.555167] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 18.560248] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 18.560293] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 18.561888] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 18.563720] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 256 [ 18.568572] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 18.569553] tegra-se-nvhost 15810000.se: initialized [ 18.570651] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 18.571570] tegra-se-nvhost 15820000.se: initialized [ 18.574222] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 18.574781] tegra-se-nvhost 15830000.se: initialized [ 18.575607] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 18.576133] tegra-se-nvhost 15840000.se: initialized [ 18.577507] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 18.577766] hidraw: raw HID events driver (C) Jiri Kosina [ 18.583235] input: PixArt Dell MS116 USB Optical Mouse as /devices/3530000.xhci/usb1/1-2/1-2:1.0/0003:413C:301A.0001/input/input0 [ 18.583871] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-3530000.xhci-2/input0 [ 18.587472] input: Dell KB216 Wired Keyboard as /devices/3530000.xhci/usb1/1-3/1-3:1.0/0003:413C:2113.0002/input/input1 [ 18.601069] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 18.613249] gpio tegra-gpio wake71 for gpio=125(P:5) [ 18.613316] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 18.645308] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-3530000.xhci-3/input0 [ 18.651820] input: Dell KB216 Wired Keyboard as /devices/3530000.xhci/usb1/1-3/1-3:1.1/0003:413C:2113.0003/input/input2 [ 18.709157] hid-generic 0003:413C:2113.0003: input,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-3530000.xhci-3/input1 [ 18.709199] usbcore: registered new interface driver usbhid [ 18.709200] usbhid: USB HID core driver [ 18.714830] tegra-i2c 3160000.i2c: no acknowledge from address 0x42 [ 18.714859] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 18.714945] ina3221x: probe of 0-0042 failed with error -121 [ 18.715149] tegra-i2c 3160000.i2c: no acknowledge from address 0x43 [ 18.715175] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 18.715246] ina3221x: probe of 0-0043 failed with error -121 [ 18.717487] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 18.719508] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 18.719704] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 18.719844] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 18.720035] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 18.720755] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 18.720828] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 18.720879] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 18.720925] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 18.721020] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 18.721325] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (50) [ 18.721328] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 18.721864] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 18.723444] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 18.723850] tegra186-aondbg aondbg: aondbg driver probe() OK [ 18.724003] register_ari_mca_banks: Registered MCA ROC:IOB [ 18.724069] register_ari_mca_banks: Registered MCA ROC:CCE [ 18.724362] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 18.724364] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 18.724366] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 18.724411] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 18.724412] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 18.724414] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 18.724458] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 18.724460] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 18.724462] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 18.724506] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 18.724508] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 18.724509] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 18.724551] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 18.724553] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 18.724554] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 18.724596] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 18.724599] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 18.724601] tegra18-bridge 2100000.axip2p: bridge probed OK [ 18.724641] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 18.724645] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 18.724647] tegra18-bridge 2110000.axip2p: bridge probed OK [ 18.724688] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 18.724692] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 18.724693] tegra18-bridge 2120000.axip2p: bridge probed OK [ 18.724734] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 18.724738] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 18.724739] tegra18-bridge 2130000.axip2p: bridge probed OK [ 18.724787] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 18.724789] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 18.724791] tegra18-bridge 2140000.axip2p: bridge probed OK [ 18.724833] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 18.724837] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 18.724839] tegra18-bridge 2150000.axip2p: bridge probed OK [ 18.724882] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 18.724887] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 18.724888] tegra18-bridge 2160000.axip2p: bridge probed OK [ 18.724929] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 18.724934] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 18.724935] tegra18-bridge 2170000.axip2p: bridge probed OK [ 18.724977] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 18.724981] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 18.724983] tegra18-bridge 2180000.axip2p: bridge probed OK [ 18.725023] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 18.725046] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 18.725047] tegra18-bridge 2190000.axip2p: bridge probed OK [ 18.725104] **** A57 ECC: Enabled [ 18.725106] tegra18_a57_serr_init: on CPU 5 a A57 Core [ 18.725165] tegra18x_actmon d230000.actmon: in actmon_register()... [ 18.725596] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 18.726503] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 18.726616] denver_knobs_init:MTS_VERSION:47926945 [ 18.739097] nvpmodel: initialized successfully [ 18.749747] trusty-virtio trusty:virtio: initializing [ 18.749846] trusty_ipc virtio0: vring0: va(pa) ffffffc1e9338000(0) qsz 32 notifyid 1 [ 18.749852] trusty_ipc virtio0: vring1: va(pa) ffffffc1e933a000(0) qsz 32 notifyid 2 [ 18.749913] trusty-virtio trusty:virtio: initializing done [ 18.749995] trusty_ipc virtio0: is online [ 18.751115] usbcore: registered new interface driver snd-usb-audio [ 18.758480] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input3 [ 18.758597] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input4 [ 18.832678] OPE platform probe [ 18.832741] OPE platform probe successful [ 18.841146] mmc1: Applying tuning correction [ 18.841173] mmc1: Tap value after applying correction 65 [ 18.841186] mmc1: hw tuning done ... [ 18.847212] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 18.885541] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 18.885614] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 18.885680] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 18.885747] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 18.885813] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 18.885879] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 18.885943] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 18.886010] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 18.886075] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 18.886138] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 18.886206] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 18.886278] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 18.886343] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 18.886411] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 18.886478] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 18.886546] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 18.886613] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 18.886681] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 18.886747] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 18.886811] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 18.906365] u32 classifier [ 18.906367] Actions configured [ 18.906467] Initializing XFRM netlink socket [ 18.908190] NET: Registered protocol family 10 [ 18.909488] NET: Registered protocol family 17 [ 18.909499] NET: Registered protocol family 15 [ 18.909722] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 18.909787] Bluetooth: RFCOMM socket layer initialized [ 18.909799] Bluetooth: RFCOMM ver 1.11 [ 18.909804] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 18.909810] Bluetooth: HIDP socket layer initialized [ 18.909842] 9pnet: Installing 9P2000 support [ 18.909888] Key type dns_resolver registered [ 18.920741] Registered cp15_barrier emulation handler [ 18.920757] Registered setend emulation handler [ 18.922107] registered taskstats version 1 [ 18.925364] isp 15600000.isp: initialized [ 18.929567] nvcsi 150c0000.nvcsi: initialized [ 18.930576] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 18.934533] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 18.934638] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 18.934731] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 18.934906] input: gpio-keys as /devices/gpio-keys/input/input5 [ 18.936067] tegra-vi4 15700000.vi: initialized [ 18.936899] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 18.968516] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:30 UTC (946688430) [ 19.011689] bpmp: mounted debugfs mirror [ 19.013756] bwmgr: missing cdev-type property [ 19.020023] spmic-ldo0: disabling [ 19.020234] spmic-ldo1: disabling [ 19.020401] en-vdd-sd: disabling [ 19.020404] vdd-usb0-5v: disabling [ 19.020407] vdd-usb1-5v: disabling [ 19.020412] vdd-3v3: disabling [ 19.020415] en-vdd-vcm-2v8: disabling [ 19.020418] vdd-sys-bl: disabling [ 19.020439] ALSA device list: [ 19.020442] #0: tegra-hda at 0x3518000 irq 382 [ 19.020444] #1: tegra-snd-t186ref-mobile-rt565x [ 19.825570] Wake76 for irq=199 [ 19.825572] Wake77 for irq=199 [ 19.825575] Wake78 for irq=199 [ 19.825577] Wake79 for irq=199 [ 19.825578] Wake80 for irq=199 [ 19.825580] Wake81 for irq=199 [ 19.825581] Wake82 for irq=199 [ 19.825619] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 19.825624] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 19.872763] Freeing unused kernel memory: 8576K [ 19.911032] Root device found: mmcblk0p1 [ 19.913080] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 19.929247] usb usb2: usb_suspend_both: status 0 [ 19.959155] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 19.982265] mmc0: periodic cache flush enabled [ 19.987431] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 19.995092] mmcblk0: mmc0:0001 DG4032 29.1 GiB [ 20.000644] mmcblk0boot0: mmc0:0001 DG4032 partition 1 4.00 MiB [ 20.007537] mmcblk0boot1: mmc0:0001 DG4032 partition 2 4.00 MiB [ 20.014505] mmcblk0rpmb: mmc0:0001 DG4032 partition 3 4.00 MiB [ 20.026313] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 20.139583] Found dev node: /dev/mmcblk0p1 [ 20.314350] EXT4-fs (mmcblk0p1): 15 orphan inodes deleted [ 20.320628] EXT4-fs (mmcblk0p1): recovery complete [ 20.332711] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 20.343208] Rootfs mounted over mmcblk0p1 [ 20.377937] Switching from initrd to actual rootfs [ 20.502683] systemd[1]: System time before build time, advancing clock. [ 20.540692] ip_tables: (C) 2000-2006 Netfilter Core Team [ 20.591786] cgroup: cgroup2: unknown option "nsdelegate" [ 20.619313] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 20.645829] systemd[1]: Detected architecture arm64. [ 20.749132] systemd[1]: Set hostname to . [ 20.918250] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 20.937586] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 21.139292] systemd[1]: Reached target User and Group Name Lookups. [ 21.152141] systemd[1]: Created slice User and Session Slice. [ 21.162309] systemd[1]: Created slice System Slice. [ 21.171765] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 21.181345] systemd[1]: Listening on Journal Socket (/dev/log). [ 21.260849] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 21.291047] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 21.756597] systemd-journald[2318]: Received request to flush runtime journal from PID 1 [ 22.399545] using random self ethernet address [ 22.408563] using random host ethernet address [ 23.433291] using random self ethernet address [ 23.452077] using random host ethernet address [ 23.605588] CPU1: shutdown [ 23.677889] CPU2: shutdown [ 24.473177] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 24.473180] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 24.525104] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 24.525107] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 24.577082] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 24.577086] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 24.629051] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 24.629054] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 24.629057] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable [ 24.753103] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 24.753106] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 24.805080] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 24.805083] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 24.833019] vdd-1v8: voltage operation not allowed [ 24.833050] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 24.857041] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 24.857045] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 24.857231] vdd-1v8: voltage operation not allowed [ 24.857239] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 24.878597] vdd-1v8: voltage operation not allowed [ 24.878604] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 24.881188] vdd-1v8: voltage operation not allowed [ 24.881196] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 24.909037] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 24.909040] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 24.909042] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable [ 24.984020] vdd-1v8: voltage operation not allowed [ 24.984031] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 24.984904] vdd-1v8: voltage operation not allowed [ 24.984911] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 24.986435] vdd-1v8: voltage operation not allowed [ 24.986442] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) Ubuntu 18.04.4 LTS n-desktop ttyS0 n-desktop login: [ 28.313046] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 28.313048] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 28.365079] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 28.365082] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 28.417067] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 28.417072] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 28.469074] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 28.469077] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 28.469080] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable [ 28.589071] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 28.589073] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 28.641087] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 28.641090] tegradc 15210000.nvdisplay: dc timeout waiting for DC to stop [ 28.693059] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 28.693062] tegradc 15210000.nvdisplay: timeout waiting for postcomp init state to promote [ 28.745067] tegradc 15210000.nvdisplay: dc_poll_register 0x41: timeout [ 28.745070] tegradc 15210000.nvdisplay: timeout waiting for win assignments to promote [ 28.745073] tegradc 15210000.nvdisplay: tegra_nvdisp_head_enable, failed head enable Ubuntu 18.04.4 LTS n-desktop ttyS0 n-desktop login: n Password: Last login: Thu Aug 27 15:21:16 EDT 2020 on ttyS0 Welcome to Ubuntu 18.04.4 LTS (GNU/Linux 4.9.140-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 205 packages can be updated. 141 updates are security updates. n@n-desktop:~$ n@n-desktop:~$ n@n-desktop:~$