=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.08.28 09:43:40 =~=~=~=~=~=~=~=~=~=~=~= at 0xd7800000 [0000.330] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.335] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.360] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.366] W> No valid slot number is found in scratch register [0000.371] W> Return default slot: _a [0000.375] I> A/B: bin_type (17) slot 0 [0000.378] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.384] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.389] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.415] I> Binary(17) of size 604720 is loaded @ 0xd796c400 [0000.645] I> Loading SCE-FW ... [0000.648] W> No valid slot number is found in scratch register [0000.654] W> Return default slot: _a [0000.658] I> A/B: bin_type (12) slot 0 [0000.661] I> Loading partition sce-fw at 0xd7300000 [0000.666] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.671] I> Addr: 0xd7300000, start-block: 58784120, num_blocks: 1 [0000.690] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.696] I> Init SCE [0000.699] I> Loading APE-FW ... [0000.702] W> No valid slot number is found in scratch register [0000.707] W> Return default slot: _a [0000.711] I> A/B: bin_type (11) slot 0 [0000.714] I> Loading partition adsp-fw at 0xd7400000 [0000.719] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.725] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.744] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.750] I> Copy BTCM section [0000.753] W> No valid slot number is found in scratch register [0000.758] W> Return default slot: _a [0000.762] I> A/B: bin_type (13) slot 0 [0000.765] I> Loading partition cpu-bootloader at 0x96000000 [0000.771] I> Reading two headers - addr:0x96000000 blocks:1 [0000.776] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.797] I> Binary(13) of size 284816 is loaded @ 0x96000000 [0000.803] W> No valid slot number is found in scratch register [0000.809] W> Return default slot: _a [0000.812] I> A/B: bin_type (20) slot 0 [0000.816] I> Loading partition bootloader-dtb at 0x8520f400 [0000.821] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.827] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.847] I> Binary(20) of size 240128 is loaded @ 0x8520f400 [0000.853] W> No valid slot number is found in scratch register [0000.859] W> Return default slot: _a [0000.862] I> A/B: bin_type (14) slot 0 [0000.866] I> Loading partition secure-os at 0x8530f600 [0000.871] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.876] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.899] I> Binary(14) of size 366000 is loaded @ 0x8530f600 [0000.906] I> TOS boot-params @ 0x85000000 [0000.910] I> TOS params prepared [0000.913] I> Loading EKS ... [0000.916] I> A/B: bin_type (15) slot 0 [0000.919] I> Loading partition eks at 0x8590f800 [0000.924] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.929] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0000.948] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.954] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.959] I> Copied encrypted keys [0000.962] I> boot profiler @ 0x275844000 [0000.966] I> boot profiler for TOS @ 0x275844000 [0000.971] I> Unhalting SCE [0000.974] I> Primary Memory Start:80000000 Size:70000000 [0000.979] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.986] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 21:14:44, Jun 25 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete [0001.358] I> Welcome to Cboot [0001.361] I> Cboot Version: t186-02737b3e [0001.365] I> CPU-BL Params @ 0x275800000 [0001.369] I> 0) Base:0x00000000 Size:0x00000000 [0001.373] I> 1) Base:0x277f00000 Size:0x00100000 [0001.378] I> 2) Base:0x277e00000 Size:0x00100000 [0001.382] I> 3) Base:0x277d00000 Size:0x00100000 [0001.387] I> 4) Base:0x277c00000 Size:0x00100000 [0001.391] I> 5) Base:0x277b00000 Size:0x00100000 [0001.396] I> 6) Base:0x277800000 Size:0x00200000 [0001.400] I> 7) Base:0x277400000 Size:0x00400000 [0001.405] I> 8) Base:0x277a00000 Size:0x00100000 [0001.409] I> 9) Base:0x277300000 Size:0x00100000 [0001.414] I> 10) Base:0x276800000 Size:0x00800000 [0001.418] I> 11) Base:0x30000000 Size:0x00040000 [0001.423] I> 12) Base:0xf0000000 Size:0x00100000 [0001.427] I> 13) Base:0x30040000 Size:0x00001000 [0001.432] I> 14) Base:0x30048000 Size:0x00001000 [0001.436] I> 15) Base:0x30049000 Size:0x00001000 [0001.440] I> 16) Base:0x3004a000 Size:0x00001000 [0001.445] I> 17) Base:0x3004b000 Size:0x00001000 [0001.449] I> 18) Base:0x3004c000 Size:0x00001000 [0001.454] I> 19) Base:0x3004d000 Size:0x00001000 [0001.458] I> 20) Base:0x3004e000 Size:0x00001000 [0001.463] I> 21) Base:0x3004f000 Size:0x00001000 [0001.467] I> 22) Base:0x00000000 Size:0x00000000 [0001.472] I> 23) Base:0xf0100000 Size:0x00010000 [0001.476] I> 24) Base:0x00000000 Size:0x00000000 [0001.480] I> 25) Base:0x00000000 Size:0x00000000 [0001.485] I> 26) Base:0x00000000 Size:0x00000000 [0001.489] I> 27) Base:0x00000000 Size:0x00000000 [0001.494] I> 28) Base:0x84400000 Size:0x00400000 [0001.498] I> 29) Base:0x30000000 Size:0x00010000 [0001.503] I> 30) Base:0x278000000 Size:0x08000000 [0001.507] I> 31) Base:0x00000000 Size:0x00000000 [0001.511] I> 32) Base:0x276000000 Size:0x00600000 [0001.516] I> 33) Base:0x80000000 Size:0x70000000 [0001.520] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.525] I> 35) Base:0x00000000 Size:0x00000000 [0001.529] I> 36) Base:0x00000000 Size:0x00000000 [0001.534] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.538] I> 38) Base:0x84000000 Size:0x00400000 [0001.543] I> 39) Base:0x96000000 Size:0x02000000 [0001.547] I> 40) Base:0x85000000 Size:0x01200000 [0001.552] I> 41) Base:0x275800000 Size:0x00500000 [0001.556] I> 42) Base:0x00000000 Size:0x00000000 [0001.561] I> 43) Base:0x00000000 Size:0x00000000 [0001.565] GIC-SPI Target CPU: 4 [0001.568] Interrupts Init done [0001.572] calling constructors [0001.575] initializing heap [0001.577] initializing threads [0001.581] initializing timers [0001.584] creating bootstrap completion thread [0001.588] top of bootstrap2() [0001.591] CPU: ARM Cortex A57 [0001.595] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.600] initializing platform [0001.603] I> Bl_dtb @0x8520f400 [0001.606] I> gpio framework initialized [0001.611] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.620] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.628] I> GPIO framework and drivers are initialized. [0001.633] I> Boot-device: eMMC [0001.640] I> sdmmc bdev is already initialized [0001.670] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.688] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.693] W> opt-in fuse is not set, skip fuse_burning [0001.698] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.704] W> No valid slot number is found in scratch register [0001.710] W> Return default slot: _a [0001.713] I> A/B: bin_type (21) slot 0 [0001.717] I> Loading kernel-dtb from partition [0001.721] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.738] I> Kernel_dtb @0x80000000 [0001.741] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.749] E> I2C: slave not found in slaves. [0001.754] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0001.761] E> I2C_DEV: Failed to send register address 0x00000004. [0001.767] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0001.776] E> tca9539_device_init: failed to write polar reg [0001.782] E> tegrabl_tca9539_init: failed to init device! [0001.787] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.794] E> I2C: slave not found in slaves. [0001.798] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0001.806] E> I2C_DEV: Failed to send register address 0x00000004. [0001.812] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0001.821] E> tca9539_device_init: failed to write polar reg [0001.826] E> tegrabl_tca9539_init: failed to init device! [0001.833] I> fixed regulator driver initialized [0001.857] I> register 'maxim' power off handle [0001.862] I> virtual i2c enabled [0001.865] I> registered 'maxim,max77620' pmic [0001.869] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.879] I> Find /i2c@c250000's alias i2c7 [0001.883] I> Reading eeprom i2c=7 address=0x50 [0001.912] I> Device at /i2c@c250000:0x50 [0001.916] I> Reading eeprom i2c=7 address=0x57 [0001.921] E> I2C: slave not found in slaves. [0001.925] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.932] E> I2C_DEV: Failed to send register address 0x00000000. [0001.938] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.948] E> eeprom: Failed to read I2C slave device [0001.952] I> Eeprom read failed 0x3526070d [0001.957] I> Find /i2c@c240000's alias i2c1 [0001.961] I> Reading eeprom i2c=1 address=0x51 [0001.966] E> I2C: slave not found in slaves. [0001.970] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.978] E> I2C_DEV: Failed to send register address 0x00000000. [0001.984] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.993] E> eeprom: Retry to read I2C slave device. [0001.998] E> I2C: slave not found in slaves. [0002.002] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.010] E> I2C_DEV: Failed to send register address 0x00000000. [0002.016] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.025] E> eeprom: Failed to read I2C slave device [0002.030] I> Eeprom read failed 0x3526070d [0002.035] I> Find /i2c@3160000's alias i2c0 [0002.039] I> Reading eeprom i2c=0 address=0x50 [0002.043] E> I2C: slave not found in slaves. [0002.047] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.055] E> I2C_DEV: Failed to send register address 0x00000000. [0002.061] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0002.070] E> eeprom: Failed to read I2C slave device [0002.075] I> Eeprom read failed 0x3526070d [0002.080] I> Find /i2c@3180000's alias i2c2 [0002.084] I> Reading eeprom i2c=2 address=0x54 [0002.088] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.093] C> GPIO driver for chip_id 0x2 could not be found [0002.098] E> cam_eeprom_read: Can't get gpio driver [0002.103] I> Eeprom read failed 0x4d4d000d [0002.107] I> Reading eeprom i2c=2 address=0x57 [0002.111] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.116] C> GPIO driver for chip_id 0x2 could not be found [0002.121] E> cam_eeprom_read: Can't get gpio driver [0002.126] I> Eeprom read failed 0x4d4d000d [0002.130] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0002.135] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.159] I> regulator 'vdd-hdmi' already enabled [0002.170] I> regulator 'vdd-hdmi' already enabled [0002.174] I> hdmi cable connected [0002.179] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts [0002.187] I> setting 'vdd-1v8' regulator to 1800000 micro volts [0002.194] E> cannot find any other nvdisp nodes [0002.214] I> edid read success [0002.229] I> edid read success [0002.232] I> width = 640, height = 480, frequency = 25174825 [0002.238] I> width = 640, height = 480, frequency = 25174825 [0002.243] I> width = 640, height = 480, frequency = 25174825 [0002.249] I> width = 640, height = 480, frequency = 25174825 [0002.254] I> width = 1920, height = 1080, frequency = 148500000 [0002.260] I> width = 1280, height = 720, frequency = 74250000 [0002.265] I> width = 1920, height = 1080, frequency = 148351648 [0002.271] I> width = 1280, height = 720, frequency = 74175824 [0002.277] I> width = 720, height = 480, frequency = 26973026 [0002.282] I> width = 1920, height = 1080, frequency = 148351648 [0002.288] I> width = 1280, height = 720, frequency = 74175824 [0002.293] I> width = 640, height = 480, frequency = 25174825 [0002.299] I> width = 720, height = 576, frequency = 26973026 [0002.304] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.314] I> hdmi_enable, starting HDMI initialisation [0002.322] I> hdmi_enable, HDMI initialisation complete [0002.335] initializing target [0002.338] calling apps_init() [0002.341] starting app kernel_boot_app [0002.363] I> found decompressor handler: lz4-legacy [0002.368] I> decompressing BMP blob ... [0002.378] I> Kernel type = Normal [0002.381] I> Loading kernel-bootctrl from partition [0002.386] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0002.401] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0002.407] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.414] I> ########## Fixed storage boot ########## [0002.419] W> No valid slot number is found in scratch register [0002.425] W> Return default slot: _a [0002.428] I> A/B: bin_type (24) slot 0 [0002.444] I> Boot image size read from image header: 74aba [0002.449] I> Boot image load address: 0x80400000 [0002.454] I> Loading kernel from partition [0002.458] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.417] I> Validate kernel ... [0003.420] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0003.428] I> kernel-dtb is already loaded [0003.432] I> Validate kernel-dtb ... [0003.435] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.442] I> Checking boot.img header magic ... [0003.447] I> [OK] [0003.448] I> Kernel hdr @0x80400000 [0003.452] I> Kernel dtb @0x80000000 [0003.455] I> decompressor handler not found [0003.459] I> Copying kernel image (477882 bytes) from 0x80400800 to 0x80600000 ... [0003.467] I> Done [0003.468] I> Move ramdisk (len: 0) from 0x80475800 to 0x947b0000 [0003.475] I> Updated bpmp info to DTB [0003.480] I> Ramdisk: Base: 0x947b0000; Size: 0x0 [0003.485] I> Updated initrd info to DTB [0003.488] W> WARN: Fail to override "console=none" in commandline [0003.494] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.501] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.509] I> disabled_core_mask: 0xffffff0c [0003.513] W> No valid slot number is found in scratch register [0003.518] W> Return default slot: _a [0003.522] I> Active slot suffix: [0003.525] I> add_boot_slot_suffix: slot_suffix = [0003.529] I> Linux Cmdline: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0003.579] I> Updated bootarg info to DTB [0003.583] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:c6:8a:1a [0003.589] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:c6:8a:1b [0003.595] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:c6:8a:1c [0003.601] E> Found no plugin manager ids in source DT [0003.606] W> Add plugin manager ids from board info [0003.611] W> "plugin-manager" doesn't exist, creating [0003.616] W> "ids" doesn't exist, creating [0003.620] W> "connection" doesn't exist, creating [0003.624] W> "configs" doesn't exist, creating [0003.629] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0003.634] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.645] I> Adding plugin-manager/ids/3310-1000-D01=/i2c@c250000:module@0x50 [0003.652] W> "i2c@c250000" doesn't exist, creating [0003.656] W> "module@0x50" doesn't exist, creating [0003.662] I> Adding plugin-manager/ids/3310-1000-D01-B [0003.668] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.674] I> Adding plugin-manager/configs/3310-power-config 00 [0003.680] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.686] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.692] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.698] I> Adding plugin-manager/configs/3310-display-config 00 [0003.704] I> Adding plugin-manager/cvm [0003.708] W> "chip-id" doesn't exist, creating [0003.712] I> Adding plugin-manager/chip-id/A02P [0003.716] W> "odm-data" doesn't exist, creating [0003.721] I> Adding /chosen/plugin-manager/odm-data [0003.729] I> added [base:0x80000000, size:0x70000000] to /memory [0003.735] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.741] I> added [base:0x275e00000, size:0x200000] to /memory [0003.747] I> added [base:0x276600000, size:0x200000] to /memory [0003.752] I> added [base:0x277000000, size:0x200000] to /memory [0003.758] I> Updated memory info to DTB [0003.762] E> add_disp_param: failed to get display params for du=1 [0003.769] W> "reset" doesn't exist, creating [0003.773] W> "pmc-reset-reason" doesn't exist, creating [0003.779] W> "pmic-reset-reason" doesn't exist, creating [0003.785] I> Adding ecid(00000001645102841c00000016fd0480) to DT [0003.791] I> disabled_core_mask: 0xffffff0c [0003.800] I> Add serial number:0424718090835 as DT property [0003.807] I> Plugin-manager override starting [0003.813] I> node /plugin-manager/fragement@0 matches [0003.821] I> node /plugin-manager/fragement@4 matches [0003.830] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.845] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.853] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.861] I> node /plugin-manager/fragment-devslp@0 matches [0003.872] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.882] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.890] I> node /plugin-manager/fragment-p3310-c01 matches [0003.898] I> node /plugin-manager/fragment-p3310-c03 matches [0003.913] I> Disable plugin-manager status in FDT [0003.918] I> Plugin-manager override finished successfully [0003.923] I> tegrabl_load_kernel_and_dtb: Done [0003.968] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2016.07-ge6da093be3 (Jun 25 2020 - 21:14:32 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 2 1 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 898 bytes read in 738 ms (1000 Bytes/s) 1:primary kernel Retrieving file: /boot/initrd 5565615 bytes read in 320 ms (16.6 MiB/s) Retrieving file: /boot/Image 34330632 bytes read in 856 ms (38.2 MiB/s) append: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000080000000, end 000000008003f99e Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (root@tx1-dev2) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Aug 5 17:13:19 EDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@9607d000 [ 0.000000] Found lut_mem2: 00002008@9607a000 [ 1.381167] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 1.381724] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 3.930149] cgroup: cgroup2: unknown option "nsdelegate" [ 5.560624] using random self ethernet address [ 5.565232] using random host ethernet address [ 6.493930] using random self ethernet address [ 6.507609] using random host ethernet address [ 7.164048] CPU1: shutdown [ 7.217194] CPU2: shutdown [ 7.555472] vdd-1v8: voltage operation not allowed [ 7.555483] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.575712] vdd-1v8: voltage operation not allowed [ 7.575721] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.596490] vdd-1v8: voltage operation not allowed [ 7.596500] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.598880] vdd-1v8: voltage operation not allowed [ 7.598886] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.702353] vdd-1v8: voltage operation not allowed [ 7.702364] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.704761] vdd-1v8: voltage operation not allowed [ 7.704773] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.708182] vdd-1v8: voltage operation not allowed [ 7.708195] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) Ubuntu 18.04.4 LTS n-desktop ttyS0 n-desktop login: n Password: Last login: Fri Aug 28 09:41:24 EDT 2020 on ttyS0 Welcome to Ubuntu 18.04.4 LTS (GNU/Linux 4.9.140-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 209 packages can be updated. 145 updates are security updates. n@n-desktop:~$ demesg [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (root@tx1-dev2) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Aug 5 17:13:19 EDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@9607d000 [ 0.000000] Found lut_mem2: 00002008@9607a000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 2053117 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 521725 pages, LIFO batch:31 [ 0.000000] Normal zone: 24008 pages used for memmap [ 0.000000] Normal zone: 1531392 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f7044000 s61656 r8192 d32552 u102400 [ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2020917 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x9607d000 lut_mem2=0x2008@0x9607a000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29320(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7961656K/8212468K available (15294K kernel code, 2934K rwdata, 6688K rodata, 8576K init, 609K bss, 185276K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a13d808 - 0xffffff800a1d5f7c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000983] Console: colour dummy device 80x25 [ 0.000988] console [tty0] enabled [ 0.000991] bootconsole [uart8250] disabled [ 0.000998] kmemleak: Kernel memory leak detector disabled [ 0.001008] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001015] pid_max: default: 32768 minimum: 301 [ 0.001319] Security Framework initialized [ 0.001472] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.001477] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002085] ftrace: allocating 47104 entries in 185 pages [ 0.125808] sched-energy: Sched-energy-costs installed from DT [ 0.125818] ASID allocator initialised with 65536 entries [ 0.160912] tegra-id: chipid=21817. [ 0.160918] tegra-id: opt_subrevision=1. [ 0.160935] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.160942] DTS File Name: tegra186-tx2-cti-ASG016.dts [ 0.160948] DTB Build time: Aug 5 2020 17:21:12 [ 0.209554] CPU1: Booted secondary processor [4e0f0030] [ 0.241194] CPU2: Booted secondary processor [4e0f0030] [ 0.272980] CPU3: Booted secondary processor [411fd073] [ 0.304963] CPU4: Booted secondary processor [411fd073] [ 0.336963] CPU5: Booted secondary processor [411fd073] [ 0.337016] Brought up 6 CPUs [ 0.337020] SMP: Total of 6 processors activated. [ 0.337025] CPU features: detected feature: 32-bit EL0 Support [ 0.337783] CPU: All CPU(s) started at EL2 [ 0.337832] alternatives: patching kernel code [ 0.347144] devtmpfs: initialized [ 0.370750] Initilizing CustomIPI irq domain [ 0.370932] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.370941] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.371737] pinctrl core: initialized pinctrl subsystem [ 0.371917] OS set in device tree is not L4T. [ 0.372064] regulator-dummy: no parameters [ 0.372208] Initializing plugin-manager [ 0.372261] Plugin module not found [ 0.372295] Plugin-manager status disabled [ 0.373399] NET: Registered protocol family 16 [ 0.374189] pstore: using zlib compression [ 0.374202] console [pstore-1] enabled [ 0.374205] pstore: Registered ramoops as persistent store backend [ 0.374208] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.392574] cpuidle: using governor menu [ 0.393460] bpmp: waiting for handshake [ 0.393464] bpmp: handshake completed [ 0.393477] bpmp: synchronizing channels [ 0.393494] bpmp: channels synchronized [ 0.393497] bpmp: mail init ok [ 0.394910] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.394915] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.394919] arm-smmu 12000000.iommu: stage 1 translation [ 0.394922] arm-smmu 12000000.iommu: stage 2 translation [ 0.394925] arm-smmu 12000000.iommu: nested translation [ 0.394931] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.394936] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.394940] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.394945] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.394948] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.396782] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000) [ 0.396794] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.399497] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.400469] Registering BPMP clocks... [ 0.400553] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.401027] Serial: AMBA PL011 UART driver [ 0.402137] tegra_powergate_init: DONE [ 0.402145] DTS File Name: tegra186-tx2-cti-ASG016.dts [ 0.402150] DTB Build time: Aug 5 2020 17:21:12 [ 0.403408] Tegra reboot handler registered. [ 0.404532] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.404592] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.404604] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.404607] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.404609] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.404760] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.404771] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.405062] iommu: Adding device 3460000.sdhci to group 0 [ 0.405654] iommu: Adding device 3400000.sdhci to group 1 [ 0.406646] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.406659] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.407045] iommu: Adding device 3160000.i2c to group 3 [ 0.407429] iommu: Adding device c240000.i2c to group 4 [ 0.407724] iommu: Adding device 3180000.i2c to group 5 [ 0.408015] iommu: Adding device 3190000.i2c to group 6 [ 0.408397] iommu: Adding device 31b0000.i2c to group 7 [ 0.408684] iommu: Adding device 31c0000.i2c to group 8 [ 0.408997] iommu: Adding device c250000.i2c to group 9 [ 0.409292] iommu: Adding device 31e0000.i2c to group 10 [ 0.410717] iommu: Adding device 3210000.spi to group 11 [ 0.411008] iommu: Adding device c260000.spi to group 12 [ 0.411642] iommu: Adding device 3100000.serial to group 13 [ 0.411943] iommu: Adding device 3110000.serial to group 14 [ 0.412231] iommu: Adding device c280000.serial to group 15 [ 0.412514] iommu: Adding device 3130000.serial to group 16 [ 0.413698] iommu: Adding device 2490000.ether_qos to group 17 [ 0.413709] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.414339] iommu: Adding device b000000.rtcpu to group 18 [ 0.416089] iommu: Adding device 13e10000.host1x to group 19 [ 0.416370] iommu: Adding device 13e10000.host1x:ctx0 to group 20 [ 0.416645] iommu: Adding device 13e10000.host1x:ctx1 to group 21 [ 0.416923] iommu: Adding device 13e10000.host1x:ctx2 to group 22 [ 0.417246] iommu: Adding device 13e10000.host1x:ctx3 to group 23 [ 0.417522] iommu: Adding device 13e10000.host1x:ctx4 to group 24 [ 0.417796] iommu: Adding device 13e10000.host1x:ctx5 to group 25 [ 0.418082] iommu: Adding device 13e10000.host1x:ctx6 to group 26 [ 0.418359] iommu: Adding device 13e10000.host1x:ctx7 to group 27 [ 0.418772] iommu: Adding device 150c0000.nvcsi to group 28 [ 0.419322] iommu: Adding device 15700000.vi to group 29 [ 0.419644] iommu: Adding device 15600000.isp to group 30 [ 0.420055] iommu: Adding device 15210000.nvdisplay to group 31 [ 0.420140] platform 15210000.nvdisplay: OF IOVA linear map 0x9607d000 size (0x800000) [ 0.420183] platform 15210000.nvdisplay: OF IOVA linear map 0x9607a000 size (0x2008) [ 0.420598] iommu: Adding device 15340000.vic to group 32 [ 0.420796] iommu: Adding device 154c0000.nvenc to group 33 [ 0.421010] iommu: Adding device 15480000.nvdec to group 34 [ 0.421312] iommu: Adding device 15380000.nvjpg to group 35 [ 0.421506] iommu: Adding device 15500000.tsec to group 36 [ 0.421707] iommu: Adding device 15100000.tsecb to group 37 [ 0.422308] iommu: Adding device 15810000.se to group 38 [ 0.422499] iommu: Adding device 15820000.se to group 39 [ 0.422691] iommu: Adding device 15830000.se to group 40 [ 0.422880] iommu: Adding device 15840000.se to group 41 [ 0.423639] iommu: Adding device smmu_test to group 42 [ 0.424189] mc: mapped MMIO address: 0xffffff800a6c0000 -> 0x2c10000 [ 0.424200] mc: mapped MMIO address: 0xffffff800a6e0000 -> 0x2c20000 [ 0.424210] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c30000 [ 0.424220] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c40000 [ 0.424229] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2c50000 [ 0.424237] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.424248] mc-err: mcerr ops are set to t18x [ 0.424384] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.425365] iommu: Adding device 3530000.xhci to group 43 [ 0.425376] arm-smmu: forcing sodev map for 3530000.xhci [ 0.425764] iommu: Adding device 3550000.xudc to group 44 [ 0.425775] arm-smmu: forcing sodev map for 3550000.xudc [ 0.426458] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.426464] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.426964] iommu: Adding device 17000000.gp10b to group 45 [ 0.427895] tegra-reset 5000000.clock: registered 193 resets. [ 0.429749] iommu: Adding device d000000.bpmp to group 46 [ 0.429951] bpmp: ping status is 0 [ 0.430052] bpmp d000000.bpmp: firmware tag is 4208eb5c85fe47a2235fbc0b8eb87dca [ 0.432897] bpmp d000000.bpmp: probe ok [ 0.435415] iommu: Adding device 2600000.dma to group 47 [ 0.436520] GPIO line 334 (e3325_sdio_rst) hogged as output/high [ 0.436582] GPIO line 332 (e3325_lane0_mux) hogged as output/low [ 0.436612] GPIO line 424 (wifi-enable) hogged as output/high [ 0.436640] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.436671] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.436859] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.440469] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.440642] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.442153] iommu: Adding device 10003000.pcie-controller to group 48 [ 0.442166] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.442450] iommu: Adding device sound to group 49 [ 0.442755] iommu: Adding device 3510000.hda to group 50 [ 0.450086] iommu: Adding device c1a0000.aon to group 51 [ 0.450526] vdd-ac-bat: 5000 mV [ 0.452223] vdd-1v8-ap: 1800 mV [ 0.494535] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.497212] random: fast init done [ 0.500509] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.501047] SCSI subsystem initialized [ 0.501338] libata version 3.00 loaded. [ 0.501744] usbcore: registered new interface driver usbfs [ 0.501803] usbcore: registered new interface driver hub [ 0.501916] usbcore: registered new device driver usb [ 0.514045] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.521150] vddio-ddr: at 1125 mV [ 0.524979] avdd_dsi_csi: 1200 mV [ 0.528977] vdd-1v8: 1800 mV [ 0.532977] vdd-3v3-sys: 3300 mV [ 0.534101] spmic-ldo0: at 1800 mV [ 0.534806] spmic-ldo1: at 800 mV [ 0.537236] vddio-3v3: 3300 mV [ 0.538093] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.541610] vdd-rtc: at 800 mV [ 0.542552] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.545231] spmic-ldo6: at 1500 mV [ 0.549234] vdd-pex-1v00: 1000 mV [ 0.550119] dvdd-pex: 1000 mV [ 0.553098] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.553283] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.553619] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.553999] max77620 4-003c: max77620 probe successful [ 0.554559] media: Linux media interface: v0.10 [ 0.554687] Linux video capture interface: v2.00 [ 0.558090] pps_core: LinuxPPS API ver. 1 registered [ 0.558106] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.558133] PTP clock support registered [ 0.558424] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.558797] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.558842] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.561120] trusty trusty: trusty version: Built: 21:16:26 Jun 25 2020 [ 0.561158] trusty trusty: selected api version: 3 (requested 3) [ 0.562352] Advanced Linux Sound Architecture Driver Initialized. [ 0.562846] Bluetooth: Core ver 2.22 [ 0.562891] NET: Registered protocol family 31 [ 0.562896] Bluetooth: HCI device and connection manager initialized [ 0.562907] Bluetooth: HCI socket layer initialized [ 0.562916] Bluetooth: L2CAP socket layer initialized [ 0.562940] Bluetooth: SCO socket layer initialized [ 0.563845] en-vdd-sd: 3300 mV [ 0.564156] en-vdd-cam: 1800 mV [ 0.564440] vdd-hdmi: 5000 mV [ 0.564780] vdd-usb0-5v: 5000 mV [ 0.565178] vdd-usb1-5v: 5000 mV [ 0.565517] en-vdd-ts-1v8: 1800 mV [ 0.565849] en-vdd-ts-hv-3v3: 3300 mV [ 0.566177] en-vdd-disp-3v3: 3300 mV [ 0.566477] en-mdm-pwr-3v7: 3700 mV [ 0.566791] en-vdd-disp-1v8: 1800 mV [ 0.567086] en-vdd-cam-hv-2v8: 2800 mV [ 0.567393] en-vdd-cam-1v2: 1200 mV [ 0.567698] vdd-fan: 5000 mV [ 0.568013] vdd-3v3: 3300 mV [ 0.568345] dis-vdd-1v2: 1200 mV [ 0.568644] en-vdd-vcm-2v8: 2800 mV [ 0.568943] vdd-usb2-5v: 5000 mV [ 0.569258] vdd-sys-bl: 3300 mV [ 0.569608] en-vdd-sys: 1200 mV [ 0.572295] camchar: rtcpu character device driver loaded [ 0.572916] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.574611] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.575494] clocksource: Switched to clocksource arch_sys_counter [ 0.597656] VFS: Disk quotas dquot_6.6.0 [ 0.597727] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.598672] tegra-pcie 10003000.pcie-controller: wrong configuration updated in DT, switching to default 2x1, 1x1, 1x1 configuration [ 0.599862] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.600509] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.600540] nvmap_page_pool_init: Total RAM pages: 2006798 [ 0.600548] nvmap_page_pool_init: nvmap page pool size: 250849 pages (979 MB) [ 0.600629] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.600729] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.605351] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.617383] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.617567] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.617901] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.617999] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.618144] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.618274] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.618443] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.618680] la/ptsa driver initialized. [ 0.618693] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.618699] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.619931] NET: Registered protocol family 2 [ 0.621929] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.622552] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.622808] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 0.623381] TCP: Hash tables configured (established 65536 bind 65536) [ 0.623434] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.623639] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.624504] NET: Registered protocol family 1 [ 0.629602] RPC: Registered named UNIX socket transport module. [ 0.629609] RPC: Registered udp transport module. [ 0.629614] RPC: Registered tcp transport module. [ 0.629618] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.629772] PCI: CLS 0 bytes, default 64 [ 0.630039] Trying to unpack rootfs image as initramfs... [ 0.817340] Freeing initrd memory: 5432K [ 0.838813] host1x 13e10000.host1x: initialized [ 0.841204] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.846169] audit: initializing netlink subsys (disabled) [ 0.846222] audit: type=2000 audit(0.732:1): initialized [ 0.847027] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.859869] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.862405] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.864067] 9p: Installing v9fs 9p2000 file system support [ 0.870638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.870788] io scheduler noop registered [ 0.871392] io scheduler cfq registered (default) [ 0.876300] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.995944] iommu: Adding device aconnect@2a41000:adsp_audio to group 52 [ 1.035037] iommu: Adding device 2993000.adsp to group 53 [ 1.036213] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.039715] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 1.043968] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.045369] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 1.046716] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 1.048044] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.054562] tsec 15500000.tsec: initialized [ 1.055974] tsec 15100000.tsecb: initialized [ 1.059395] nvdec 15480000.nvdec: initialized [ 1.065227] falcon 15340000.vic: initialized [ 1.066801] falcon 154c0000.nvenc: initialized [ 1.068355] falcon 15380000.nvjpg: initialized [ 1.072488] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.074144] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.075811] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.077412] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.079040] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.080658] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.082217] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.083804] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.086749] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.086763] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.086813] tegradccommon 15200000.dc_common: dma mapping done [ 1.088262] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=389 [ 1.088364] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.088506] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 1.088546] generic_infoframe_type: 0x87 [ 1.088616] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.088623] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.088647] tegradc 15210000.nvdisplay: Display dc.ffffff800b650000 registered with id=0 [ 1.088654] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.088899] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.088907] tegra_cec 3960000.tegra_cec: probed [ 1.089400] of_fixed_clk: probe of can_clock failed with error -17 [ 1.098926] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 1.098935] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 1.098940] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 1.099250] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 1.099263] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 1.100829] tegradc 15210000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.104208] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.104216] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.106465] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.107108] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.107132] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.107688] kfuse 3830000.kfuse: initialized [ 1.107969] tegradc 15210000.nvdisplay: probed [ 1.109307] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.114516] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.118071] console [ttyS0] disabled [ 1.118142] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 35, base_baud = 25500000) is a Tegra [ 1.118211] console [ttyS0] enabled [ 1.119905] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 36, base_baud = 0) is a TEGRA_UART [ 1.121028] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 1.121303] serial-tegra 3130000.serial: RX in PIO mode [ 1.122219] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 1.123331] [drm] Initialized [ 1.123534] Console: switching to colour frame buffer device 240x67 [ 1.123714] tegradc 15210000.nvdisplay: fb registered [ 1.123909] gpio tegra-gpio wake21 for gpio=121(P:1) [ 1.124468] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.124555] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.124689] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.132767] Parent Clock set for DC plld2 [ 1.134611] brd: module loaded [ 1.139431] loop: module loaded [ 1.139559] tegra_profiler: version: 1.141, samples/io: 48/28 [ 1.139681] tegra_profiler: auth: init [ 1.140167] nct1008_nct72 7-004c: starting parse dt [ 1.140308] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 1.140320] nct1008_nct72 7-004c: success parsing dt [ 1.140443] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 1.140619] THERMAL EST: found 3 subdevs [ 1.140650] THERMAL EST num_resources: 0 [ 1.140682] [THERMAL EST subdev 0] [ 1.140689] [THERMAL EST subdev 1] [ 1.140695] [THERMAL EST subdev 2] [ 1.141010] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 1.141015] THERMAL EST: thz register success. [ 1.141139] THERMAL EST: end of probe, return err: 0 [ 1.142113] sd: No Scsi addr parsed to reserve index [ 1.142145] hisi_sas: driver version v1.6 [ 1.146244] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 1.146258] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 1.147258] scsi host0: tegra_ahci [ 1.148163] scsi host1: tegra_ahci [ 1.148329] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 1.148334] ata2: DUMMY [ 1.152787] libphy: Fixed MDIO Bus: probed [ 1.153939] tun: Universal TUN/TAP device driver, 1.6 [ 1.153944] tun: (C) 1999-2004 Max Krasnyansky [ 1.154626] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.154632] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.154675] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.154679] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.154717] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.154721] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.154758] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.154763] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.163742] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 1.167438] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b c6 8a 1c [ 1.167609] libphy: dwc_phy: probed [ 1.172109] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 1.172737] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 1.183989] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 1.186179] PPP generic driver version 2.4.2 [ 1.186365] PPP BSD Compression module registered [ 1.186371] PPP Deflate Compression module registered [ 1.186416] PPP MPPE Compression module registered [ 1.186422] NET: Registered protocol family 24 [ 1.186466] usbcore: registered new interface driver r8152 [ 1.186499] usbcore: registered new interface driver asix [ 1.186530] usbcore: registered new interface driver ax88179_178a [ 1.186561] usbcore: registered new interface driver cdc_ether [ 1.186588] usbcore: registered new interface driver net1080 [ 1.186612] usbcore: registered new interface driver cdc_subset [ 1.186636] usbcore: registered new interface driver zaurus [ 1.186672] usbcore: registered new interface driver cdc_ncm [ 1.186836] VFIO - User Level meta-driver version: 0.3 [ 1.192864] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.192884] ehci-pci: EHCI PCI platform driver [ 1.192921] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.192931] ohci-pci: OHCI PCI platform driver [ 1.192965] ohci-platform: OHCI generic platform driver [ 1.197693] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 1.198824] tegradc 15210000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.199379] tegradc 15210000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.199393] tegradc 15210000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.200373] tegra-xusb 3530000.xhci: extcon 0: ffffffc1eac28800 id [ 1.201191] usbcore: registered new interface driver uas [ 1.201240] usbcore: registered new interface driver usb-storage [ 1.201357] usbcore: registered new interface driver usbserial [ 1.202860] tegra-xusb 3530000.xhci: Firmware timestamp: 2019-10-31 05:52:15 UTC, Version: 55.17 release [ 1.205536] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.205682] nct1008_nct72 7-004c: initial LOC temp: 40000 [ 1.205992] nct1008_nct72 7-004c: initial EXT temp: 53500 [ 1.206597] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 1.206897] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 1.206938] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.206969] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.207088] nct1008_nct72 7-004c: nct1008_probe: initialized [ 1.207881] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.208536] mousedev: PS/2 mouse device common for all mice [ 1.208608] usbcore: registered new interface driver xpad [ 1.225981] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.225987] Extcon AUX1(HDMI) enable [ 1.227608] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.227630] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 1.228363] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 1.228406] tegra-xusb 3530000.xhci: irq 69, io mem 0x03530000 [ 1.228676] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.228685] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.228692] usb usb1: Product: xHCI Host Controller [ 1.228697] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.228703] usb usb1: SerialNumber: 3530000.xhci [ 1.229080] hub 1-0:1.0: USB hub found [ 1.229123] hub 1-0:1.0: 4 ports detected [ 1.229517] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.229531] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 1.229752] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.229760] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.229766] usb usb2: Product: xHCI Host Controller [ 1.229772] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.229778] usb usb2: SerialNumber: 3530000.xhci [ 1.230182] hub 2-0:1.0: USB hub found [ 1.230223] hub 2-0:1.0: 3 ports detected [ 1.328069] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.329107] Wake73 for irq=42 [ 1.331007] rtc rtc1: alarm rtc device [ 1.331060] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.331100] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.331294] i2c /dev entries driver [ 1.333901] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.339451] parse_throttle_dt_data: Num cap clks = 4 [ 1.339537] parse_throttle_dt_data: clk=mcpu type=1 [ 1.339543] parse_throttle_dt_data: clk=bcpu type=2 [ 1.339554] parse_throttle_dt_data: clk=gpu type=4 [ 1.339559] parse_throttle_dt_data: clk=emc type=3 [ 1.340678] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.341327] FAN dev name: pwm-fan [ 1.341392] FAN:gpio request success. [ 1.341403] FAN: can't find tach_gpio [ 1.341447] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.341769] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 1.341776] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.342488] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.342496] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.342503] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.342509] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.342514] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.342520] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.342526] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.342532] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.342539] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.342545] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.344619] device-mapper: uevent: version 1.0.3 [ 1.345447] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.345733] CPU EMC frequency mapping table: default setting [ 1.349760] cpufreq: platform driver Initialization: pass [ 1.350395] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.350509] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.351675] sdhci: Secure Digital Host Controller Interface driver [ 1.351680] sdhci: Copyright(c) Pierre Ossman [ 1.351683] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.353190] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.355168] CMDQ: cmdq_platfm_init successful [ 1.356450] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.356458] CQE: CMD_TIMING bit set for R1B DCMD [ 1.359859] tegradc 15210000.nvdisplay: blank - powerdown [ 1.360695] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 1.360740] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 1.361518] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 1.363339] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 256 [ 1.368634] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.369695] tegra-se-nvhost 15810000.se: initialized [ 1.370780] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.371561] tegra-se-nvhost 15820000.se: initialized [ 1.372460] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.375896] tegra-se-nvhost 15830000.se: initialized [ 1.376641] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.377170] tegra-se-nvhost 15840000.se: initialized [ 1.378017] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.378257] hidraw: raw HID events driver (C) Jiri Kosina [ 1.379187] usbcore: registered new interface driver usbhid [ 1.379189] usbhid: USB HID core driver [ 1.381093] tegra-i2c 3160000.i2c: no acknowledge from address 0x42 [ 1.381167] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 1.381337] ina3221x: probe of 0-0042 failed with error -121 [ 1.381693] tegra-i2c 3160000.i2c: no acknowledge from address 0x43 [ 1.381724] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 1.381997] ina3221x: probe of 0-0043 failed with error -121 [ 1.384531] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.386814] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.387096] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.387282] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 1.387472] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 1.388754] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 1.388836] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 1.388887] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 1.388936] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 1.389070] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 1.389393] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (50) [ 1.389395] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.389916] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 1.391517] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.391944] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.392153] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.392226] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.393022] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.393026] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 1.393029] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.393087] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.393090] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 1.393093] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.393154] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.393157] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 1.393160] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.393238] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.393241] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 1.393243] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.393296] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.393299] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 1.393302] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.393356] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.393362] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 1.393364] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.393419] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.393424] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 1.393426] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.393478] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.393484] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 1.393486] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.393539] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.393544] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 1.393547] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.393612] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.393616] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 1.393618] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.393669] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.393675] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 1.393677] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.393728] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.393734] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 1.393737] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.393788] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.393793] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 1.393796] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.393851] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.393858] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 1.393860] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.393910] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.393916] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 1.393918] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.394096] tegra18_a57_serr_init: on CPU 1 a Denver Core [ 1.394156] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.394729] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.395152] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.395264] denver_knobs_init:MTS_VERSION:47926945 [ 1.396983] nvpmodel: initialized successfully [ 1.397843] trusty-virtio trusty:virtio: initializing [ 1.397998] trusty_ipc virtio0: vring0: va(pa) ffffffc1e6ae2000(0) qsz 32 notifyid 1 [ 1.398007] trusty_ipc virtio0: vring1: va(pa) ffffffc1e6af0000(0) qsz 32 notifyid 2 [ 1.398130] trusty-virtio trusty:virtio: initializing done [ 1.398316] trusty_ipc virtio0: is online [ 1.399176] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.399179] Extcon AUX1(HDMI) disable [ 1.399439] usbcore: registered new interface driver snd-usb-audio [ 1.399504] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.399523] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.411854] gpio tegra-gpio wake71 for gpio=125(P:5) [ 1.411905] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.417922] snd_hda_codec_hdmi hdaudioC0D4: HDMI: invalid ELD data byte 22 [ 1.420660] snd_hda_codec_hdmi hdaudioC0D4: HDMI: invalid ELD data byte 0 [ 1.420665] snd_hda_codec_hdmi hdaudioC0D4: HDMI: Unknown ELD version 0 [ 1.421232] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.421461] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.423043] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1.423135] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.423653] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.434050] tegradc 15210000.nvdisplay: unblank [ 1.434809] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.435030] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.435344] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.437445] Parent Clock set for DC plld2 [ 1.441441] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.442936] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 1.442961] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.461986] ata1: SATA link down (SStatus 0 SControl 300) [ 1.473088] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.481187] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.481190] Extcon AUX1(HDMI) enable [ 1.487208] mmc0: periodic cache flush enabled [ 1.487222] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.487662] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 1.487857] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB [ 1.489038] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB [ 1.489305] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 1.492404] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 1.496802] OPE platform probe [ 1.496874] OPE platform probe successful [ 1.543434] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.543533] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.543599] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.543663] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.543725] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.543795] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.543859] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.543925] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.543987] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.544051] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.544116] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 1.544178] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 1.544241] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 1.544305] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 1.544369] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 1.544432] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 1.544505] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 1.544568] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 1.544631] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 1.544702] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 1.555521] usb 1-2: new low-speed USB device number 2 using tegra-xusb [ 1.568408] u32 classifier [ 1.568412] Actions configured [ 1.568493] Initializing XFRM netlink socket [ 1.570069] NET: Registered protocol family 10 [ 1.575420] NET: Registered protocol family 17 [ 1.575433] NET: Registered protocol family 15 [ 1.575660] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.575749] Bluetooth: RFCOMM socket layer initialized [ 1.575761] Bluetooth: RFCOMM ver 1.11 [ 1.575767] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.575773] Bluetooth: HIDP socket layer initialized [ 1.575792] 9pnet: Installing 9P2000 support [ 1.575838] Key type dns_resolver registered [ 1.577039] Registered cp15_barrier emulation handler [ 1.578054] Registered setend emulation handler [ 1.579566] registered taskstats version 1 [ 1.582763] isp 15600000.isp: initialized [ 1.582832] driver not enabled, cannot register any devices [ 1.584264] usb 1-2: New USB device found, idVendor=413c, idProduct=2113 [ 1.584269] usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.584272] usb 1-2: Product: Dell KB216 Wired Keyboard [ 1.587134] nvcsi 150c0000.nvcsi: initialized [ 1.587160] driver not enabled, cannot register any devices [ 1.588061] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 1.589197] input: Dell KB216 Wired Keyboard as /devices/3530000.xhci/usb1/1-2/1-2:1.0/0003:413C:2113.0001/input/input2 [ 1.592699] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.592807] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 1.592895] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 1.593048] input: gpio-keys as /devices/gpio-keys/input/input3 [ 1.594174] tegra-vi4 15700000.vi: initialized [ 1.596565] driver not enabled, cannot register any devices [ 1.643393] mmc1: Applying tuning correction [ 1.643405] mmc1: Tap value after applying correction 60 [ 1.643411] mmc1: hw tuning done ... [ 1.647107] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 1.648227] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-3530000.xhci-2/input0 [ 1.654837] input: Dell KB216 Wired Keyboard as /devices/3530000.xhci/usb1/1-2/1-2:1.1/0003:413C:2113.0002/input/input4 [ 1.680243] tegra_rtc c2a0000.rtc: setting system clock to 2020-08-28 13:43:53 UTC (1598622233) [ 1.681061] mmcblk mmc0:0001: Card claimed for testing. [ 1.711919] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-3530000.xhci-2/input1 [ 1.719676] bpmp: mounted debugfs mirror [ 1.721103] bwmgr: missing cdev-type property [ 1.726352] spmic-ldo0: disabling [ 1.726528] spmic-ldo1: disabling [ 1.726713] en-vdd-sd: disabling [ 1.726716] vdd-usb0-5v: disabling [ 1.726719] vdd-usb1-5v: disabling [ 1.726725] vdd-3v3: disabling [ 1.726727] en-vdd-vcm-2v8: disabling [ 1.726730] vdd-sys-bl: disabling [ 1.726733] ALSA device list: [ 1.726743] #0: tegra-hda at 0x3518000 irq 382 [ 1.726745] #1: tegra-snd-t186ref-mobile-rt565x [ 1.831568] usb 1-3: new low-speed USB device number 3 using tegra-xusb [ 1.857097] usb 1-3: New USB device found, idVendor=413c, idProduct=301a [ 1.857105] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.857110] usb 1-3: Product: Dell MS116 USB Optical Mouse [ 1.857115] usb 1-3: Manufacturer: PixArt [ 1.860739] input: PixArt Dell MS116 USB Optical Mouse as /devices/3530000.xhci/usb1/1-3/1-3:1.0/0003:413C:301A.0003/input/input5 [ 1.861042] hid-generic 0003:413C:301A.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-3530000.xhci-3/input0 [ 2.095564] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.160108] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 2.160114] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 3.506780] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 3.506785] Extcon HDMI: HPD enabled [ 3.506805] tegradc 15210000.nvdisplay: hdmi: plugged [ 3.508681] Freeing unused kernel memory: 8576K [ 3.551849] Root device found: mmcblk0p1 [ 3.554270] Found dev node: /dev/mmcblk0p1 [ 3.681803] EXT4-fs (mmcblk0p1): 14 orphan inodes deleted [ 3.681810] EXT4-fs (mmcblk0p1): recovery complete [ 3.686516] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.688135] Rootfs mounted over mmcblk0p1 [ 3.722563] Switching from initrd to actual rootfs [ 3.885091] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.930149] cgroup: cgroup2: unknown option "nsdelegate" [ 3.954405] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.957530] systemd[1]: Detected architecture arm64. [ 4.048486] systemd[1]: Set hostname to . [ 4.224390] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 4.224415] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.347981] Wake76 for irq=199 [ 4.347986] Wake77 for irq=199 [ 4.347989] Wake78 for irq=199 [ 4.347991] Wake79 for irq=199 [ 4.347993] Wake80 for irq=199 [ 4.347995] Wake81 for irq=199 [ 4.347998] Wake82 for irq=199 [ 4.348031] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 4.348036] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 4.416848] random: systemd: uninitialized urandom read (16 bytes read) [ 4.420550] systemd[1]: Created slice System Slice. [ 4.420924] random: systemd: uninitialized urandom read (16 bytes read) [ 4.421269] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.421359] random: systemd: uninitialized urandom read (16 bytes read) [ 4.423189] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 4.423888] systemd[1]: Listening on Journal Socket. [ 4.430931] systemd[1]: Starting Load Kernel Modules... [ 4.444510] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 4.451734] usb usb2: usb_suspend_both: status 0 [ 4.480130] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.612425] random: crng init done [ 4.612430] random: 7 urandom warning(s) missed due to ratelimiting [ 4.839713] systemd-journald[2323]: Received request to flush runtime journal from PID 1 [ 5.560624] using random self ethernet address [ 5.565232] using random host ethernet address [ 5.951641] dhd_module_init in [ 5.951722] found wifi platform device bcmdhd_wlan [ 5.952642] wifi_platform_get_country_code_map: could not get country_code_map [ 5.952645] wifi_plat_dev_drv_probe:platform country code map is not available [ 5.952662] Power-up adapter 'DHD generic adapter' [ 5.952670] wifi_platform_set_power = 1 [ 6.163540] wifi_platform_bus_enumerate device present 1 [ 6.202551] wifi_platform_bus_enumerate device present 0 [ 6.203255] F1 signature read @0x18000000=0x17214354 [ 6.274742] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 6.283113] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 6.288134] wifi_platform_get_mac_addr [ 6.293115] ids dhd_log_netlink_init [ 6.324893] wl_event_handler : [ 6.324898] tsk Enter, tsk = 0xffffffc1deb41a90 [ 6.324904] wl_create_event_handler(): thread:wl_event_handler:13af started [ 6.325248] dhd_attach(): thread:dhd_watchdog_thread:13b1 started [ 6.333890] dhd_attach(): thread:dhd_dpc:13b2 started [ 6.336871] dhd_attach(): thread:dhd_rxf:13b7 started [ 6.336880] dhd_deferred_work_init: work queue initialized [ 6.378763] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 6.380735] Register interface [wlan0] MAC: 00:04:4b:c6:8a:1a [ 6.380741] dhd_prot_ioctl : bus is down. we have nothing to do [ 6.395428] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 60 [ 6.402841] wifi_platform_set_power = 0 [ 6.486253] Mass Storage Function, version: 2009/09/11 [ 6.486259] LUN: removable file: (no medium) [ 6.493930] using random self ethernet address [ 6.507609] using random host ethernet address [ 6.537399] rndis0: HOST MAC 7e:d0:e9:b7:ee:94 [ 6.537501] rndis0: MAC 7e:d0:e9:b7:ee:95 [ 6.537971] usb0: HOST MAC 7e:d0:e9:b7:ee:96 [ 6.537996] usb0: MAC 7e:d0:e9:b7:ee:97 [ 6.538014] tegra-xudc-new 3550000.xudc: exiting ELPG [ 6.549440] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 6.549460] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 6.549492] tegra-xudc-new 3550000.xudc: entering ELPG [ 6.550305] tegra-xudc-new 3550000.xudc: entering ELPG done [ 6.550358] tegra-xudc-new 3550000.xudc: exiting ELPG [ 6.557426] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 6.557451] tegra-xudc-new 3550000.xudc: entering ELPG [ 6.558056] tegra-xudc-new 3550000.xudc: entering ELPG done [ 6.567985] l4tbr0: port 1(rndis0) entered blocking state [ 6.567990] l4tbr0: port 1(rndis0) entered disabled state [ 6.568682] device rndis0 entered promiscuous mode [ 6.577668] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 6.582464] l4tbr0: port 2(usb0) entered blocking state [ 6.582468] l4tbr0: port 2(usb0) entered disabled state [ 6.582910] device usb0 entered promiscuous mode [ 6.590397] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 7.164048] CPU1: shutdown [ 7.183529] psci: Retrying again to check for CPU kill [ 7.183534] psci: CPU1 killed. [ 7.194669] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.217194] CPU2: shutdown [ 7.239629] psci: Retrying again to check for CPU kill [ 7.239632] psci: CPU2 killed. [ 7.272303] gpio tegra-gpio wake18 for gpio=101(M:5) [ 7.274548] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.344703] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.344817] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 7.344824] wl_android_wifi_on in [ 7.344828] wifi_platform_set_power = 1 [ 7.555472] vdd-1v8: voltage operation not allowed [ 7.555483] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.575712] vdd-1v8: voltage operation not allowed [ 7.575721] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.596490] vdd-1v8: voltage operation not allowed [ 7.596500] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.598880] vdd-1v8: voltage operation not allowed [ 7.598886] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.702353] vdd-1v8: voltage operation not allowed [ 7.702364] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.704761] vdd-1v8: voltage operation not allowed [ 7.704773] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.708182] vdd-1v8: voltage operation not allowed [ 7.708195] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.708225] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 60 [ 7.709207] F1 signature read @0x18000000=0x17214354 [ 7.714508] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 7.715161] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 7.801513] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 7.866189] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 7.866537] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 7.866611] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 7.866613] Enabling wake69 [ 7.868025] wifi_platform_get_mac_addr [ 7.869703] Firmware up: op_mode=0x0005, MAC=00:04:4b:c6:8a:1a [ 7.873935] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 7.873968] Skipping the clm download. len:0 memblk: (null) [ 7.876081] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 7.880915] Firmware version = wl0: Nov 6 2019 21:22:23 version 7.35.349.85 (r723239 CY) FWID 01-a59d25b5 [ 7.883808] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 7.998235] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ 7.998235] P2P interface registered [ 8.006880] WLC_E_IF: NO_IF set, event Ignored [ 8.017215] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.028408] zram: Added device: zram0 [ 9.029570] zram: Added device: zram1 [ 9.032599] zram: Added device: zram2 [ 9.034255] zram: Added device: zram3 [ 9.049638] zram0: detected capacity change from 0 to 1029275648 [ 9.069261] Adding 1005148k swap on /dev/zram0. Priority:5 extents:1 across:1005148k SS [ 9.075225] zram1: detected capacity change from 0 to 1029275648 [ 9.097526] Adding 1005148k swap on /dev/zram1. Priority:5 extents:1 across:1005148k SS [ 9.101099] zram2: detected capacity change from 0 to 1029275648 [ 9.110760] Adding 1005148k swap on /dev/zram2. Priority:5 extents:1 across:1005148k SS [ 9.114257] zram3: detected capacity change from 0 to 1029275648 [ 9.134519] Adding 1005148k swap on /dev/zram3. Priority:5 extents:1 across:1005148k SS [ 10.311223] tegradc 15210000.nvdisplay: blank - powerdown [ 10.357047] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 10.358223] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.376590] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 10.376592] Extcon AUX1(HDMI) disable [ 10.398474] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 10.398551] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 10.399011] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 10.399140] tegradc 15210000.nvdisplay: unblank [ 10.399768] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 10.399861] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 10.399955] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 10.401208] Parent Clock set for DC plld2 [ 10.404395] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 10.405616] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 10.405622] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 10.443594] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 10.443598] Extcon AUX1(HDMI) enable [ 10.445416] tegradc 15210000.nvdisplay: unblank [ 13.124047] fuse init (API version 7.26) [ 13.273716] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.273728] Bluetooth: BNEP socket layer initialized [ 14.101065] tegradc 15210000.nvdisplay: unblank n@n-desktop:~$ n@n-desktop:~$ n@n-desktop:~$ n@n-desktop:~$ sudo su [sudo] password for n: root@n-desktop:/home/n# cat /boot/rextlinux/extlinux.conf TIMEOUT 30 DEFAULT primary MENU TITLE L4T boot options LABEL primary MENU LABEL primary kernel LINUX /boot/Image #FDT /boot/tegra186-tx2-cti-ASG016-IMX274.dtb INITRD /boot/initrd APPEND ${cbootargs} quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 # When testing a custom kernel, it is recommended that you create a backup of # the original kernel and add a new entry to this file so that the device can # fallback to the original kernel. To do this: # # 1, Make a backup of the original kernel # sudo cp /boot/Image /boot/Image.backup # # 2, Copy your custom kernel into /boot/Image # # 3, Uncomment below menu setting lines for the original kernel # # 4, Reboot # LABEL backup # MENU LABEL backup kernel # LINUX /boot/Image.backup # INITRD /boot/initrd # APPEND ${cbootargs} root@n-desktop:/home/n#