[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (root@dev-OptiPlex-7070) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #5 SMP PREEMPT Wed Jan 5 10:24:13 EST 2022 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06b1000 [ 0.000000] Found lut_mem: 00002008@a06ae000 [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2031101 [ 0.000000] DMA zone: 7160 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 458237 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999365 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06b1000 lut_mem=0x2008@0xa06ae000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29976(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7182284K/8124404K available (15358K kernel code, 2958K rwdata, 6788K rodata, 8640K init, 610K bss, 188456K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009630000 ( 6848 KB) [ 0.000000] .init : 0xffffff8009630000 - 0xffffff8009ea0000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009ea0000 - 0xffffff800a183808 ( 2959 KB) [ 0.000000] .bss : 0xffffff800a183808 - 0xffffff800a21c0b4 ( 611 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000564] Console: colour dummy device 80x25 [ 0.000576] console [tty0] enabled [ 0.000583] bootconsole [tegra_comb_uart0] disabled [ 0.000597] kmemleak: Kernel memory leak detector disabled [ 0.000620] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000636] pid_max: default: 32768 minimum: 301 [ 0.001742] Security Framework initialized [ 0.002302] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002313] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003921] ftrace: allocating 47094 entries in 184 pages [ 0.398609] sched-energy: Sched-energy-costs installed from DT [ 0.398629] ASID allocator initialised with 65536 entries [ 0.434311] tegra-id: chipid=21917. [ 0.434323] tegra-id: opt_subrevision=0. [ 0.434350] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.434376] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.434386] DTB Build time: Jan 13 2022 03:12:29 [ 0.482213] CPU1: Booted secondary processor [4e0f0040] [ 0.514297] CPU2: Booted secondary processor [4e0f0040] [ 0.546381] CPU3: Booted secondary processor [4e0f0040] [ 0.578620] CPU4: Booted secondary processor [4e0f0040] [ 0.610711] CPU5: Booted secondary processor [4e0f0040] [ 0.610885] Brought up 6 CPUs [ 0.610895] SMP: Total of 6 processors activated. [ 0.610904] CPU features: detected feature: Privileged Access Never [ 0.610910] CPU features: detected feature: LSE atomic instructions [ 0.610916] CPU features: detected feature: User Access Override [ 0.610922] CPU features: detected feature: 32-bit EL0 Support [ 0.612431] CPU: All CPU(s) started at EL2 [ 0.612479] alternatives: patching kernel code [ 0.618879] devtmpfs: initialized [ 0.663151] Initilizing CustomIPI irq domain [ 0.663397] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.663454] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.676349] pinctrl core: initialized pinctrl subsystem [ 0.676603] OS set in device tree is not L4T. [ 0.676907] regulator-dummy: no parameters [ 0.677204] Initializing plugin-manager [ 0.677263] Plugin module not found [ 0.677346] Plugin-manager status disabled [ 0.678441] NET: Registered protocol family 16 [ 0.679660] pstore: using zlib compression [ 0.679687] console [pstore-1] enabled [ 0.679696] pstore: Registered ramoops as persistent store backend [ 0.679705] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.697476] cpuidle: using governor menu [ 0.698536] bpmp: waiting for handshake [ 0.698548] bpmp: handshake completed [ 0.698581] bpmp: synchronizing channels [ 0.698593] bpmp: channels synchronized [ 0.698604] bpmp: mail init ok [ 0.701084] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.701274] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.701280] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.701306] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.701311] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.701317] t19x-arm-smmu 12000000.iommu: nested translation [ 0.701326] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.701354] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.701361] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.701372] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.701379] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.704926] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009ea4000) [ 0.704965] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.707586] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.709176] tegra_aon_clk_init: ok [ 0.709191] Registering BPMP clocks... [ 0.709309] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.709995] Serial: AMBA PL011 UART driver [ 0.710181] tegra_powergate_init: DONE [ 0.710243] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.710259] DTB Build time: Jan 13 2022 03:12:29 [ 0.713614] Tegra reboot handler registered. [ 0.721854] iommu: Adding device 14160000.pcie to group 0 [ 0.722554] iommu: Adding device 141a0000.pcie to group 1 [ 0.723989] iommu: Adding device 2490000.ether_qos to group 2 [ 0.724507] iommu: Adding device 3100000.serial to group 3 [ 0.725013] iommu: Adding device 3110000.serial to group 4 [ 0.725461] iommu: Adding device 3140000.serial to group 5 [ 0.726248] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.726621] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.726658] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.726663] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.726668] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.726719] tegra-pmc: PMC Prod config success [ 0.726956] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.726990] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.727359] iommu: Adding device 3460000.sdhci to group 6 [ 0.727936] iommu: Adding device 3440000.sdhci to group 7 [ 0.728481] iommu: Adding device 3210000.spi to group 8 [ 0.728984] iommu: Adding device 3230000.spi to group 9 [ 0.729401] iommu: Adding device 3270000.spi to group 10 [ 0.730826] iommu: Adding device 3160000.i2c to group 11 [ 0.731255] iommu: Adding device c240000.i2c to group 12 [ 0.731686] iommu: Adding device 3180000.i2c to group 13 [ 0.732146] iommu: Adding device 3190000.i2c to group 14 [ 0.732703] iommu: Adding device 31b0000.i2c to group 15 [ 0.733173] iommu: Adding device 31c0000.i2c to group 16 [ 0.733616] iommu: Adding device c250000.i2c to group 17 [ 0.734081] iommu: Adding device 31e0000.i2c to group 18 [ 0.734739] iommu: Adding device sound to group 19 [ 0.735292] iommu: Adding device 3510000.hda to group 20 [ 0.735913] iommu: Adding device bc00000.rtcpu to group 21 [ 0.737867] iommu: Adding device 13e10000.host1x to group 22 [ 0.738295] iommu: Adding device 13e10000.host1x:ctx0 to group 23 [ 0.738702] iommu: Adding device 13e10000.host1x:ctx1 to group 24 [ 0.739093] iommu: Adding device 13e10000.host1x:ctx2 to group 25 [ 0.739536] iommu: Adding device 13e10000.host1x:ctx3 to group 26 [ 0.739921] iommu: Adding device 13e10000.host1x:ctx4 to group 27 [ 0.740374] iommu: Adding device 13e10000.host1x:ctx5 to group 28 [ 0.740832] iommu: Adding device 13e10000.host1x:ctx6 to group 29 [ 0.741200] iommu: Adding device 13e10000.host1x:ctx7 to group 30 [ 0.741790] iommu: Adding device 15340000.vic to group 31 [ 0.742252] iommu: Adding device 15380000.nvjpg to group 32 [ 0.742537] iommu: Adding device 15500000.tsec to group 33 [ 0.742854] iommu: Adding device 15100000.tsecb to group 34 [ 0.743143] iommu: Adding device 15480000.nvdec to group 35 [ 0.743428] iommu: Adding device 15140000.nvdec1 to group 36 [ 0.743752] iommu: Adding device 154c0000.nvenc to group 37 [ 0.744051] iommu: Adding device 15a80000.nvenc1 to group 38 [ 0.744463] iommu: Adding device 15880000.nvdla0 to group 39 [ 0.744871] iommu: Adding device 158c0000.nvdla1 to group 40 [ 0.745452] iommu: Adding device 15200000.nvdisplay to group 41 [ 0.745657] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06b1000(800000) [ 0.745669] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06ae000(3000) [ 0.749676] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.749756] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.750570] iommu: Adding device 15210000.nvdisplay to group 42 [ 0.750663] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.752623] iommu: Adding device 15c10000.vi to group 43 [ 0.752849] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.753311] iommu: Adding device 14800000.isp to group 44 [ 0.754331] iommu: Adding device 16000000.pva0 to group 45 [ 0.754886] iommu: Adding device 16800000.pva1 to group 46 [ 0.755339] iommu: Adding device 15810000.se to group 47 [ 0.755736] iommu: Adding device 15820000.se to group 48 [ 0.756059] iommu: Adding device 15830000.se to group 49 [ 0.756362] iommu: Adding device 15840000.se to group 50 [ 0.756641] iommu: Adding device c1a0000.aon to group 51 [ 0.758352] iommu: Adding device d000000.bpmp to group 52 [ 0.758691] bpmp: ping status is 0 [ 0.758839] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.762042] bpmp d000000.bpmp: probe ok [ 0.764095] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.764594] iommu: Adding device smmu_test to group 53 [ 0.765813] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c10000 [ 0.765840] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c20000 [ 0.765868] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c30000 [ 0.765893] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c40000 [ 0.765917] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2c50000 [ 0.765940] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2b80000 [ 0.765962] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2b90000 [ 0.765985] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x2ba0000 [ 0.766007] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x2bb0000 [ 0.766030] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1700000 [ 0.766052] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1710000 [ 0.766074] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1720000 [ 0.766115] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1730000 [ 0.766137] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1740000 [ 0.766156] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1750000 [ 0.766172] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1760000 [ 0.766187] mc: mapped MMIO address: 0xffffff800b1d0000 -> 0x1770000 [ 0.766260] mc-err: mcerr ops are set to t19x [ 0.772241] iommu: Adding device 2600000.dma to group 54 [ 0.777722] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.778908] GPIO line 339 (wifi-enable) hogged as output/high [ 0.778949] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.778986] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.779276] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.787721] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.787802] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.787839] GPIO line 266 (w-disable1) hogged as output/high [ 0.787872] GPIO line 264 (w-disable2) hogged as output/high [ 0.787906] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.788255] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.791093] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.791106] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.791117] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.792004] iommu: Adding device 3550000.xudc to group 55 [ 0.792760] iommu: Adding device 3610000.xhci to group 56 [ 0.795043] arm64_ras arm64_ras: probed [ 0.795481] ras_fhi_enable: FHI 470 enabled on CPU0 [ 0.795525] ras_fhi_enable: FHI 471 enabled on CPU1 [ 0.795590] ras_fhi_enable: FHI 472 enabled on CPU2 [ 0.795656] ras_fhi_enable: FHI 473 enabled on CPU3 [ 0.795753] ras_fhi_enable: FHI 474 enabled on CPU4 [ 0.795818] ras_fhi_enable: FHI 475 enabled on CPU5 [ 0.796012] carmel_ras_enable: RAS enabled on cpu0 [ 0.796182] carmel_ras_enable: RAS enabled on cpu1 [ 0.796373] carmel_ras_enable: RAS enabled on cpu2 [ 0.796562] carmel_ras_enable: RAS enabled on cpu3 [ 0.796744] carmel_ras_enable: RAS enabled on cpu4 [ 0.796936] carmel_ras_enable: RAS enabled on cpu5 [ 0.797040] carmel_ras carmel_ras: probed [ 0.798135] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 479, noc_nonsecure_irq = 478> [ 0.798663] tegra-cbb c600000.aon-noc: noc_secure_irq = 481, noc_nonsecure_irq = 480> [ 0.799571] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 483, noc_nonsecure_irq = 482> [ 0.800445] tegra-cbb be00000.rce-noc: noc_secure_irq = 485, noc_nonsecure_irq = 484> [ 0.801400] tegra-cbb b600000.sce-noc: noc_secure_irq = 487, noc_nonsecure_irq = 486> [ 0.801827] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.803210] vdd-ac-bat: 5000 mV [ 0.803638] vdd-sdmmc1-sw: 3300 mV [ 0.803964] vdd-1v8-sd: 1800 mV [ 0.804308] vdd-3v3-cvb: 3300 mV [ 0.804641] vdd-1v8-cvb: 1800 mV [ 0.804959] vdd-epb-1v0: 1000 mV [ 0.805375] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.805703] avdd-cam-2v8: 2800 mV [ 0.806083] vdd-fan: 5000 mV [ 0.806409] vdd-hdmi-5v0: 5000 mV [ 0.806747] vdd_sys_en: 1200 mV [ 0.846758] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.851428] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.851745] SCSI subsystem initialized [ 0.851975] libata version 3.00 loaded. [ 0.852288] usbcore: registered new interface driver usbfs [ 0.852397] usbcore: registered new interface driver hub [ 0.852446] usbcore: registered new device driver usb [ 0.864450] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.867372] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.874584] vdd-1v0: at 1000 mV [ 0.878183] vdd-1v8-hs: at 1800 mV [ 0.882206] vdd-1v8-ls: at 1800 mV [ 0.886263] vdd-1v8-ao: at 1800 mV [ 0.890253] vddio-ddr-1v1: at 1100 mV [ 0.894029] vdd-rtc: at 800 mV [ 0.895238] spmic-ldo1: at 2375 mV [ 0.902059] vdd-ao-3v3: at 3300 mV [ 0.910128] vddio-emmc-3v3: at 3300 mV [ 0.911414] spmic-ldo4: at 1587 mV [ 0.918134] vdd-usb-3v3: at 3300 mV [ 0.926173] vddio-sdmmc1-3v3: at 3300 mV [ 0.930202] vdd-csi-1v2: at 1200 mV [ 0.931745] spmic-ldo8: at 1800 mV [ 0.936620] GPIO line 246 (gpio_default) hogged as output/high [ 0.937954] GPIO line 247 (gpio_default) hogged as output/high [ 0.938269] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.938705] max77620 4-003c: max77620 probe successful [ 0.939201] media: Linux media interface: v0.10 [ 0.939246] Linux video capture interface: v2.00 [ 0.940797] pps_core: LinuxPPS API ver. 1 registered [ 0.940806] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.940884] PTP clock support registered [ 0.941311] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.941590] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.941629] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.944206] trusty trusty: trusty version: Built: 12:20:34 Jul 26 2021 [ 0.944277] trusty trusty: selected api version: 3 (requested 3) [ 0.945454] Advanced Linux Sound Architecture Driver Initialized. [ 0.945985] Bluetooth: Core ver 2.22 [ 0.946048] NET: Registered protocol family 31 [ 0.946053] Bluetooth: HCI device and connection manager initialized [ 0.946065] Bluetooth: HCI socket layer initialized [ 0.946073] Bluetooth: L2CAP socket layer initialized [ 0.946100] Bluetooth: SCO socket layer initialized [ 0.948772] camchar: rtcpu character device driver loaded [ 0.949309] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.949405] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.950940] clocksource: Switched to clocksource arch_sys_counter [ 0.996626] VFS: Disk quotas dquot_6.6.0 [ 0.996746] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.997126] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.998619] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 0.998671] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.998864] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.998871] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.998885] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 0.998894] nvmap_page_pool_init: Total RAM pages: 1983987 [ 0.998899] nvmap_page_pool_init: nvmap page pool size: 247998 pages (968 MB) [ 0.999073] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.999484] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.001840] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.015449] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.015688] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.015908] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.016133] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.016345] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.017510] la/ptsa driver initialized. [ 1.017916] NET: Registered protocol family 2 [ 1.018814] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.019229] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.019834] TCP: Hash tables configured (established 65536 bind 65536) [ 1.019882] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.020008] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.020419] NET: Registered protocol family 1 [ 1.020969] RPC: Registered named UNIX socket transport module. [ 1.020976] RPC: Registered udp transport module. [ 1.020981] RPC: Registered tcp transport module. [ 1.020987] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.021002] PCI: CLS 0 bytes, default 64 [ 1.021225] Trying to unpack rootfs image as initramfs... [ 1.246425] Freeing initrd memory: 7068K [ 1.265397] random: fast init done [ 1.269506] host1x 13e10000.host1x: initialized [ 1.271168] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.275588] audit: initializing netlink subsys (disabled) [ 1.275629] audit: type=2000 audit(0.896:1): initialized [ 1.276310] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.286974] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.288388] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.289153] 9p: Installing v9fs 9p2000 file system support [ 1.294323] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.294501] io scheduler noop registered [ 1.294818] io scheduler cfq registered (default) [ 1.298498] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.302279] iommu: Adding device 2993000.adsp to group 57 [ 1.332627] iommu: Adding device aconnect@2a41000:adsp_audio to group 58 [ 1.333727] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.346135] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.346569] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.347203] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.347664] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.348178] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.351168] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.351357] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.354021] tsec 15500000.tsec: initialized [ 1.355585] tsec 15100000.tsecb: initialized [ 1.359251] nvdec 15480000.nvdec: initialized [ 1.362039] nvdec 15140000.nvdec1: initialized [ 1.367900] falcon 15340000.vic: initialized [ 1.369938] falcon 15380000.nvjpg: initialized [ 1.371987] falcon 154c0000.nvenc: initialized [ 1.373927] falcon 15a80000.nvenc1: initialized [ 1.376888] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.378900] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.380571] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.382230] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.383915] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.385453] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.386883] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.388440] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.391963] t194-nvcsi 15a00000.nvcsi: initialized [ 1.397162] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.397563] scare-pigeon 14b00000.isp-thi: initialized [ 1.402869] pva 16000000.pva0: initialized [ 1.408469] pva 16800000.pva1: initialized [ 1.413356] nvdla 15880000.nvdla0: initialized [ 1.417945] nvdla 158c0000.nvdla1: initialized [ 1.419120] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.419134] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.419171] tegradccommon 15200000.dc_common: dma mapping done [ 1.420052] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.420082] generic_infoframe_type: 0x87 [ 1.420159] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.420216] tegradc 15200000.nvdisplay: Display dc.ffffff800bd20000 registered with id=0 [ 1.423822] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.423830] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.423836] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.424099] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.424110] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.424870] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.427215] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.427225] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.430510] tegradc 15200000.nvdisplay: probed [ 1.466923] Console: switching to colour frame buffer device 240x67 [ 1.467104] tegradc 15200000.nvdisplay: fb registered [ 1.467467] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.468048] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.468135] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.473157] Parent Clock set for DC plld2 [ 1.526849] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.527581] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.527628] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.553444] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.553451] Extcon AUX1(HDMI) enable [ 1.554004] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.554037] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.554147] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.554224] tegradc 15210000.nvdisplay: Display dc.ffffff800be10000 registered with id=1 [ 1.554460] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.554496] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.563521] tegradc 15210000.nvdisplay: probed [ 1.563935] tegradc 15210000.nvdisplay: fb registered [ 1.567272] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.567282] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.567298] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.567313] tegradc 15210000.nvdisplay: blank - powerdown [ 1.567358] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.567363] Extcon DP: HPD disabled [ 1.567367] hpd: hpd_switch 0 [ 1.567374] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.567400] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.567412] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.567673] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=78 [ 1.567684] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.568008] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.568155] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.568286] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.568294] tegra_cec 3960000.tegra_cec: probed [ 1.578891] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.579798] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.579808] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.580262] kfuse 3830000.kfuse: initialized [ 1.587331] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.590223] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.591383] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.592388] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.593510] console [ttyTCU0] enabled [ 1.594048] [drm] Initialized [ 1.607396] brd: module loaded [ 1.613499] loop: module loaded [ 1.613832] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.613966] tegra_profiler: auth: init [ 1.614503] THERMAL EST: found 3 subdevs [ 1.614510] THERMAL EST num_resources: 0 [ 1.614516] [THERMAL EST subdev 0] [ 1.614539] [THERMAL EST subdev 1] [ 1.614555] [THERMAL EST subdev 2] [ 1.614574] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.614966] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.614971] THERMAL EST: thz register success. [ 1.615144] THERMAL EST: end of probe, return err: 0 [ 1.616916] sd: No Scsi addr parsed to reserve index [ 1.616950] hisi_sas: driver version v1.6 [ 1.627178] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.627186] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.627196] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.627413] 1 ofpart partitions found on MTD device spi6.0 [ 1.627418] Creating 1 MTD partitions on "spi6.0": [ 1.627435] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.629814] libphy: Fixed MDIO Bus: probed [ 1.630578] tun: Universal TUN/TAP device driver, 1.6 [ 1.630583] tun: (C) 1999-2004 Max Krasnyansky [ 1.631427] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.631433] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.631488] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.631492] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.631545] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.631549] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.631598] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.631602] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.686161] tegradc 15200000.nvdisplay: blank - powerdown [ 1.727195] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.727200] Extcon AUX1(HDMI) disable [ 1.752984] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.754220] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.842915] tegradc 15200000.nvdisplay: unblank [ 1.844768] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.845081] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.855995] Parent Clock set for DC plld2 [ 1.860780] tegradc 15200000.nvdisplay: hdmi: tmds rate:262750K prod-setting:prod_c_hdmi_223m_300m [ 1.862200] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.878143] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.878665] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 5 a2 2c [ 1.878697] Using phyrst_lpmode = 1 from DT [ 1.878813] libphy: dwc_phy: probed [ 1.881310] PPP generic driver version 2.4.2 [ 1.881693] PPP BSD Compression module registered [ 1.881701] PPP Deflate Compression module registered [ 1.881718] PPP MPPE Compression module registered [ 1.881722] NET: Registered protocol family 24 [ 1.881806] usbcore: registered new interface driver r8152 [ 1.881851] usbcore: registered new interface driver asix [ 1.881886] usbcore: registered new interface driver ax88179_178a [ 1.881919] usbcore: registered new interface driver cdc_ether [ 1.881949] usbcore: registered new interface driver net1080 [ 1.881978] usbcore: registered new interface driver cdc_subset [ 1.882007] usbcore: registered new interface driver zaurus [ 1.882060] usbcore: registered new interface driver cdc_ncm [ 1.882247] VFIO - User Level meta-driver version: 0.3 [ 1.883481] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.883500] ehci-pci: EHCI PCI platform driver [ 1.883549] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.883558] ohci-pci: OHCI PCI platform driver [ 1.883599] ohci-platform: OHCI generic platform driver [ 1.888523] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.890545] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4d90400 id [ 1.891340] usbcore: registered new interface driver uas [ 1.891395] usbcore: registered new interface driver usb-storage [ 1.891467] usbcore: registered new interface driver usbserial [ 1.892933] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 1.893014] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.893033] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.893779] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.893823] tegra-xusb 3610000.xhci: irq 465, io mem 0x03610000 [ 1.894066] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.894072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.894077] usb usb1: Product: xHCI Host Controller [ 1.894106] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.894109] usb usb1: SerialNumber: 3610000.xhci [ 1.894601] hub 1-0:1.0: USB hub found [ 1.894645] hub 1-0:1.0: 4 ports detected [ 1.895204] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.895213] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.895221] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.895468] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.895474] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.895478] usb usb2: Product: xHCI Host Controller [ 1.895483] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.895487] usb usb2: SerialNumber: 3610000.xhci [ 1.895850] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.895927] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.895997] hub 2-0:1.0: USB hub found [ 1.896065] hub 2-0:1.0: 4 ports detected [ 1.896899] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.896907] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.896931] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.897005] Wake76 for irq=199 [ 1.897009] Wake77 for irq=199 [ 1.897011] Wake78 for irq=199 [ 1.897014] Wake79 for irq=199 [ 1.897020] Wake80 for irq=199 [ 1.897022] Wake81 for irq=199 [ 1.897024] Wake82 for irq=199 [ 1.897095] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.897101] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.897428] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.897432] Extcon AUX1(HDMI) enable [ 1.897518] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.897980] mousedev: PS/2 mouse device common for all mice [ 1.898095] usbcore: registered new interface driver xpad [ 1.929105] tegradc 15200000.nvdisplay: sync windows ret = 242 [ 1.995448] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.995454] Extcon HDMI: HPD enabled [ 1.995475] tegradc 15200000.nvdisplay: hdmi: plugged [ 1.999655] usb usb2: usb_suspend_both: status 0 [ 2.041237] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 2.042865] Wake73 for irq=42 [ 2.044303] rtc rtc1: alarm rtc device [ 2.044320] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 2.044343] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.044511] i2c /dev entries driver [ 2.047021] i2c i2c-2: Added multiplexed i2c bus 9 [ 2.047445] i2c i2c-2: Added multiplexed i2c bus 10 [ 2.047454] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 2.048062] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.071601] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.071693] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.072055] imx219 9-0010: board setup failed [ 2.072272] imx219: probe of 9-0010 failed with error -121 [ 2.072751] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.096020] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.096095] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.096433] imx219 10-0010: board setup failed [ 2.096642] imx219: probe of 10-0010 failed with error -121 [ 2.097942] max77620-power max20024-power: Event recorder REG_NVERC : 0x54 [ 2.104059] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.104403] FAN dev name: pwm-fan [ 2.104460] FAN:gpio request success. [ 2.104473] FAN: can't find tach_gpio [ 2.104485] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.104512] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.104840] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.104848] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.105381] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.105389] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.105396] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.105402] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.105409] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.105415] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.105422] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.105429] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.105437] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.105444] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.106198] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.107242] device-mapper: uevent: version 1.0.3 [ 2.107706] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.111421] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.112345] cpuidle: Initializing cpuidle driver [ 2.113190] sdhci: Secure Digital Host Controller Interface driver [ 2.113195] sdhci: Copyright(c) Pierre Ossman [ 2.113198] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.114071] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 2.115856] CMDQ: cmdq_platfm_init successful [ 2.118439] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 2.124726] tegra-se-nvhost 15810000.se: initialized [ 2.125835] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.126833] tegra-se-nvhost 15820000.se: initialized [ 2.127989] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.128976] tegra-se-nvhost 15830000.se: initialized [ 2.129627] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.130205] tegra-se-nvhost 15840000.se: initialized [ 2.131199] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.132289] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.132407] hidraw: raw HID events driver (C) Jiri Kosina [ 2.135100] usbcore: registered new interface driver usbhid [ 2.135104] usbhid: USB HID core driver [ 2.139412] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.140439] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.140809] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.141476] denver_knobs_init:MTS_VERSION:53250041 [ 2.141790] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.142568] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.143018] t19x_cache tegra-cache: probed [ 2.145369] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.145376] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.145816] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.146156] PLL_AON clock registered [ 2.148411] Clocks initialized successfully [ 2.150292] nvpmodel: initialized successfully [ 2.151333] trusty-virtio trusty:virtio: initializing [ 2.151545] trusty_ipc virtio0: vring0: va(pa) ffffffc1e26aa000(0) qsz 32 notifyid 1 [ 2.151555] trusty_ipc virtio0: vring1: va(pa) ffffffc1e26b8000(0) qsz 32 notifyid 2 [ 2.151700] trusty-virtio trusty:virtio: initializing done [ 2.152019] trusty_ipc virtio0: is online [ 2.152368] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.152818] usbcore: registered new interface driver snd-usb-audio [ 2.158981] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.166973] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.172970] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.173182] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.173375] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.173660] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.204941] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 2.217065] mmc0: periodic cache flush enabled [ 2.217077] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.221666] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.221891] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.223150] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.223480] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.223712] OPE platform probe [ 2.223835] OPE platform probe successful [ 2.226976] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.228681] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.247828] usb 1-2: New USB device found, idVendor=0424, idProduct=2742 [ 2.247836] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.247840] usb 1-2: Product: USB2742 [ 2.247844] usb 1-2: Manufacturer: Microchip Tech [ 2.248658] hub 1-2:1.0: USB hub found [ 2.248731] hub 1-2:1.0: 3 ports detected [ 2.293530] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.293675] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.293815] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.293956] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.294085] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.294211] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.294335] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.294498] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.294674] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.294777] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.294875] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.295003] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.295103] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.295201] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.295297] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.295431] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.295551] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.295689] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.295809] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.295910] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.325772] u32 classifier [ 2.325777] Actions configured [ 2.325876] Initializing XFRM netlink socket [ 2.326553] NET: Registered protocol family 10 [ 2.327404] NET: Registered protocol family 17 [ 2.327433] NET: Registered protocol family 15 [ 2.327504] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.327611] Bluetooth: RFCOMM socket layer initialized [ 2.327637] Bluetooth: RFCOMM ver 1.11 [ 2.327645] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.327653] Bluetooth: HIDP socket layer initialized [ 2.327672] 9pnet: Installing 9P2000 support [ 2.327713] Key type dns_resolver registered [ 2.327952] Registered cp15_barrier emulation handler [ 2.327973] Registered setend emulation handler [ 2.329759] registered taskstats version 1 [ 2.330008] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.331119] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.331138] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.331147] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.331152] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.367199] usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb [ 2.387567] usb 2-3: New USB device found, idVendor=0424, idProduct=5742 [ 2.387574] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 2.387578] usb 2-3: Product: USB5742 [ 2.387582] usb 2-3: Manufacturer: Microchip Tech [ 2.389611] hub 2-3:1.0: USB hub found [ 2.389995] hub 2-3:1.0: 2 ports detected [ 2.506977] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 2.527213] usb 1-3: New USB device found, idVendor=2001, idProduct=f103 [ 2.527219] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.528008] hub 1-3:1.0: USB hub found [ 2.528073] hub 1-3:1.0: 7 ports detected [ 2.582976] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.647504] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 2.647511] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.814981] usb 1-3.3: new low-speed USB device number 4 using tegra-xusb [ 2.839666] usb 1-3.3: New USB device found, idVendor=045e, idProduct=00cb [ 2.839672] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.839677] usb 1-3.3: Product: Microsoft USB Optical Mouse [ 2.839681] usb 1-3.3: Manufacturer: PixArt [ 2.842731] input: PixArt Microsoft USB Optical Mouse as /devices/3610000.xhci/usb1/1-3/1-3.3/1-3.3:1.0/0003:045E:00CB.0001/input/input4 [ 2.843082] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-3610000.xhci-3.3/input0 [ 2.845659] tegra-pcie-dw 14160000.pcie: link is down [ 2.845813] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.845820] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.845828] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.845834] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.845840] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.845867] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.846014] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.846288] iommu: Adding device 0004:00:00.0 to group 59 [ 2.846497] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.846520] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 2.846709] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.846717] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.846824] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.847019] pcie_pme 0004:00:00.0:pcie001: unloading service driver pcie_pme [ 2.847083] aer 0004:00:00.0:pcie002: unloading service driver aer [ 2.847175] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 2.847277] iommu: Removing device 0004:00:00.0 from group 59 [ 2.847300] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 2.848998] tegra-pcie-dw 14160000.pcie: PCIe link is not up...! [ 2.849651] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.849849] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 2.849859] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 2.926972] usb 1-3.7: new low-speed USB device number 5 using tegra-xusb [ 2.953019] usb 1-3.7: New USB device found, idVendor=045e, idProduct=07b9 [ 2.953025] usb 1-3.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.953030] usb 1-3.7: Product: USB Keyboard [ 2.953034] usb 1-3.7: Manufacturer: LITEON Technology [ 2.955345] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.955365] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.955374] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.955380] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.959058] input: LITEON Technology USB Keyboard as /devices/3610000.xhci/usb1/1-3/1-3.7/1-3.7:1.0/0003:045E:07B9.0002/input/input5 [ 2.982974] usb 2-3: usb_suspend_both: status 0 [ 2.983152] usb usb2: usb_suspend_both: status 0 [ 3.019638] hid-generic 0003:045E:07B9.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-3610000.xhci-3.7/input0 [ 3.026980] usb 1-2.3: new high-speed USB device number 6 using tegra-xusb [ 3.047947] usb 1-2.3: New USB device found, idVendor=0424, idProduct=2740 [ 3.047953] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.047957] usb 1-2.3: Product: Hub Controller [ 3.047961] usb 1-2.3: Manufacturer: Microchip Tech [ 3.066963] tegra-pcie-dw 141a0000.pcie: link is up [ 3.067172] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 3.067179] pci_bus 0005:00: root bus resource [bus 00-ff] [ 3.067187] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 3.067193] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 3.067197] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 3.067239] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 3.067383] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 3.067613] iommu: Adding device 0005:00:00.0 to group 59 [ 3.067899] pci 0005:01:00.0: [1344:6001] type 00 class 0x010802 [ 3.068014] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 3.068891] iommu: Adding device 0005:01:00.0 to group 60 [ 3.079790] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 3.079799] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f40003fff 64bit] [ 3.079859] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 3.079867] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 3.079883] pci 0005:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 3.079925] pci 0005:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 3.080165] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 3.080187] pci 0005:01:00.0: Signaling PME through PCIe PME interrupt [ 3.080194] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 3.080292] aer 0005:00:00.0:pcie002: service driver aer loaded [ 3.080798] nvme nvme0: pci function 0005:01:00.0 [ 3.080831] nvme 0005:01:00.0: enabling device (0000 -> 0002) [ 3.090854] tegra-cbb 14040000.cv-noc: noc_secure_irq = 91, noc_nonsecure_irq = 90> [ 3.095514] tegra194-isp5 14800000.isp: initialized [ 3.102465] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 3.106469] tegra194-vi5 15c10000.vi: initialized [ 3.111247] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 3.111410] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 3.111613] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 3.115769] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 3.115787] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 3.115792] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 3.115894] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 3.115939] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 3.115944] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 3.119861] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 3.119899] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 3.119904] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 3.120266] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 3.120320] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 3.120326] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 3.120831] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 3.120893] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 3.120897] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 3.121154] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 3.121893] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.142989] mmc1: host does not support reading read-only switch, assuming write-enable [ 3.202224] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 3.203618] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.203841] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 3.205071] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 3.205486] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 3.205589] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 3.205830] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (66) [ 3.205834] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.211825] nvme0n1: p1 [ 3.213082] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=06bdc710c3c9a48de2881774602bbcf4d0114a58 [ 3.213500] Wake83 for irq=211 [ 3.213570] gpio tegra-gpio wake67 for gpio=48(G:0) [ 3.213681] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 3.213871] input: gpio-keys as /devices/gpio-keys/input/input6 [ 3.242963] usb 1-3.5: new high-speed USB device number 7 using tegra-xusb [ 3.249203] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 02:11:17 UTC (946692677) [ 3.249609] mmcblk mmc0:0001: Card claimed for testing. [ 3.268928] usb 1-3.5: New USB device found, idVendor=0781, idProduct=5591 [ 3.268937] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.268942] usb 1-3.5: Product: SanDisk 3.2Gen1 [ 3.268945] usb 1-3.5: Manufacturer: USB [ 3.268950] usb 1-3.5: SerialNumber: 0101a3c71239d3558f1f383d9f4498d064af34cf2b442661b8b9bbd551320c9c8aca00000000000000000000aba7b7b9ff8522009155810785ab08e9 [ 3.279117] usb-storage 1-3.5:1.0: USB Mass Storage device detected [ 3.279430] scsi host0: usb-storage 1-3.5:1.0 [ 3.293585] bpmp: mounted debugfs mirror [ 3.296485] mmc1: hw tuning done ... [ 3.296553] mmc1: new ultra high speed SDR104 SDXC card at address 0260 [ 3.300832] ALSA device list: [ 3.300838] #0: tegra-hda-xnx at 0x3518000 irq 65 [ 3.300841] #1: jetson-xaviernx-ape [ 3.301019] mmcblk1: mmc1:0260 i-TF 57.7 GiB [ 3.302225] Freeing unused kernel memory: 8640K [ 3.306076] mmcblk1: p1 [ 3.342219] Root device found: mmcblk0p1 [ 3.344264] Found dev node: /dev/mmcblk0p1 [ 3.369256] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.371978] Rootfs mounted over mmcblk0p1 [ 3.404958] Switching from initrd to actual rootfs [ 3.519564] systemd[1]: System time before build time, advancing clock. [ 3.541347] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.544994] cgroup: cgroup2: unknown option "nsdelegate" [ 3.554011] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.554768] systemd[1]: Detected architecture arm64. [ 3.560882] systemd[1]: Set hostname to . [ 3.645714] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.645726] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.793426] random: systemd: uninitialized urandom read (16 bytes read) [ 3.793680] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.793772] random: systemd: uninitialized urandom read (16 bytes read) [ 3.793797] systemd[1]: Reached target User and Group Name Lookups. [ 3.793860] random: systemd: uninitialized urandom read (16 bytes read) [ 3.797099] systemd[1]: Created slice System Slice. [ 3.797632] systemd[1]: Listening on Journal Audit Socket. [ 3.797989] systemd[1]: Listening on Journal Socket. [ 3.848037] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.911390] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: errors=remount-ro,discard [ 3.912615] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.056937] systemd-journald[2351]: Received SIGTERM from PID 1 (systemd). [ 4.100007] systemd: 39 output lines suppressed due to ratelimiting [ 4.169014] systemd[1]: System time before build time, advancing clock. [ 4.174634] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.175304] systemd[1]: Detected architecture arm64. [ 4.176550] systemd[1]: Set hostname to . [ 4.247940] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 4.248351] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.312037] scsi 0:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 4.313084] sd 0:0:0:0: [sda] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB) [ 4.313844] sd 0:0:0:0: [sda] Write Protect is off [ 4.313996] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 4.314578] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.328814] sda: sda1 [ 4.330833] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.377021] systemd[1]: Started Journal Service. [ 4.382425] systemd[1]: Started Change rootfs to SSD in M.2 key M slot (nvme0n1p1). [ 4.384226] systemd[1]: Started Apply Kernel Variables. [ 4.384603] systemd[1]: systemd-udev-trigger.service: Main process exited, code=killed, status=15/TERM [ 4.385090] systemd[1]: systemd-udev-trigger.service: Failed with result 'signal'. [ 4.569704] systemd-journald[3204]: Received request to flush runtime journal from PID 1 [ 5.544777] random: crng init done [ 5.544914] random: 7 urandom warning(s) missed due to ratelimiting [ 5.810693] using random self ethernet address [ 5.810851] using random host ethernet address [ 6.103211] FAN rising trip_level:1 cur_temp:46000 trip_temps[2]:60000 [ 6.493937] can: controller area network core (rev 20120528 abi 9) [ 6.494608] NET: Registered protocol family 29 [ 6.524266] can: raw protocol (rev 20120528) [ 6.555722] CAN device driver interface [ 6.567441] Message RAM Configuration | base addr |0x0c312000| | sidfc_flssa |0x00000000| | xidfc_flesa |0x00000040| | rxf0c_f0sa |0x000000c0| | rxf1c_f1sa |0x000009c0| | rxbc_rbsa |0x000009c0| | txefc_efsa |0x000009c0| | txbc_tbsa |0x00000a40| | tmc_tmsa |0x00000ec0| [ 6.567574] Release 3.2.0 from 19.12.2014 [ 6.568033] net can0: mttcan device registered (regs=ffffff800a487000, irq=64) [ 6.591261] mttcan c310000.mttcan can0: Bitrate set [ 6.610908] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.615660] Mass Storage Function, version: 2009/09/11 [ 6.615670] LUN: removable file: (no medium) [ 6.621610] using random self ethernet address [ 6.621774] using random host ethernet address [ 6.739445] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 6.796279] cpu-throttle-alert cooling device registered. [ 6.797668] gpu-throttle-alert cooling device registered. [ 6.798507] aux-throttle-alert cooling device registered. [ 6.940639] gpio tegra-gpio wake20 for gpio=52(G:4) [ 6.945555] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.964625] rndis0: HOST MAC 2a:24:41:11:c3:24 [ 6.964705] mttcan_controller_config: ctrlmode 30 [ 6.964742] mttcan c310000.mttcan can0: Bitrate set [ 6.964807] IPv6: ADDRCONF(NETDEV_UP): can0: link is not ready [ 6.965929] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready [ 6.965971] rndis0: MAC 2a:24:41:11:c3:25 [ 6.969460] usb0: HOST MAC 2a:24:41:11:c3:26 [ 6.969506] usb0: MAC 2a:24:41:11:c3:27 [ 6.969533] tegra-xudc-new 3550000.xudc: exiting ELPG [ 6.970415] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 6.970441] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 6.970486] tegra-xudc-new 3550000.xudc: entering ELPG [ 6.970722] tegra-xudc-new 3550000.xudc: entering ELPG done [ 6.970740] tegra-xudc-new 3550000.xudc: exiting ELPG [ 6.971196] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 6.971211] tegra-xudc-new 3550000.xudc: entering ELPG [ 6.971425] tegra-xudc-new 3550000.xudc: entering ELPG done [ 6.988007] zram: Added device: zram0 [ 6.988492] l4tbr0: port 1(rndis0) entered blocking state [ 6.988501] l4tbr0: port 1(rndis0) entered disabled state [ 6.988724] device rndis0 entered promiscuous mode [ 6.991832] zram: Added device: zram1 [ 6.994760] zram: Added device: zram2 [ 6.998094] zram: Added device: zram3 [ 6.999789] zram: Added device: zram4 [ 7.009983] zram: Added device: zram5 [ 7.020559] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 7.030110] l4tbr0: port 2(usb0) entered blocking state [ 7.030118] l4tbr0: port 2(usb0) entered disabled state [ 7.030340] device usb0 entered promiscuous mode [ 7.040547] zram0: detected capacity change from 0 to 678543360 [ 7.041962] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 7.070385] Adding 662636k swap on /dev/zram0. Priority:5 extents:1 across:662636k SS [ 7.075681] zram1: detected capacity change from 0 to 678543360 [ 7.097549] Adding 662636k swap on /dev/zram1. Priority:5 extents:1 across:662636k SS [ 7.102131] zram2: detected capacity change from 0 to 678543360 [ 7.139994] Adding 662636k swap on /dev/zram2. Priority:5 extents:1 across:662636k SS [ 7.145271] zram3: detected capacity change from 0 to 678543360 [ 7.165536] Adding 662636k swap on /dev/zram3. Priority:5 extents:1 across:662636k SS [ 7.172368] zram4: detected capacity change from 0 to 678543360 [ 7.194744] Adding 662636k swap on /dev/zram4. Priority:5 extents:1 across:662636k SS [ 7.198575] zram5: detected capacity change from 0 to 678543360 [ 7.231330] Adding 662636k swap on /dev/zram5. Priority:5 extents:1 across:662636k SS [ 7.731312] Bridge firewalling registered [ 7.754362] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 8.146187] Netfilter messages via NETLINK v0.30. [ 8.148506] ctnetlink v0.93: registering with nfnetlink. [ 8.389462] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 8.525494] tegradc 15200000.nvdisplay: unblank [ 8.525511] tegradc 15210000.nvdisplay: blank - powerdown [ 11.357429] fuse init (API version 7.26) [ 13.761260] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.761279] Bluetooth: BNEP socket layer initialized [ 14.816752] tegradc 15200000.nvdisplay: blank - powerdown [ 14.937696] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 14.937700] Extcon AUX1(HDMI) disable [ 14.976305] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 14.976911] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 14.977394] tegradc 15210000.nvdisplay: blank - powerdown [ 14.997521] tegradc 15200000.nvdisplay: blank - powerdown [ 14.997550] tegradc 15200000.nvdisplay: unblank [ 14.998439] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 14.998535] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 15.003093] Parent Clock set for DC plld2 [ 15.008580] tegradc 15200000.nvdisplay: hdmi: tmds rate:220642K prod-setting:prod_c_hdmi_111m_223m [ 15.009985] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 15.048523] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 15.048527] Extcon AUX1(HDMI) enable [ 15.048649] tegradc 15200000.nvdisplay: unblank [ 15.048661] tegradc 15210000.nvdisplay: blank - powerdown [ 17.460290] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 17.483357] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 17.509974] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 34.135176] vdd-sdmmc1-sw: disabling [ 34.135186] vdd-1v8-sd: disabling [ 34.135193] vdd-1v8-cvb: disabling [ 34.135198] vdd-epb-1v0: disabling [ 34.135203] avdd-cam-2v8: disabling [ 34.135208] vdd-fan: disabling [ 34.135213] vdd_sys_en: disabling