picocom v2.2 port is : /dev/ttyUSB3 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : yes nolock is : yes send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs, Type [C-a] [C-h] to see available commands Terminal ready �� [0000.085] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.093] I> MB1 (prd-version: 1.5.1.7-t194-41334769-98030a79) [0000.098] I> Boot-mode: Coldboot [0000.101] I> Chip revision : A02P [0000.104] I> Bootrom patch version : 15 (correctly patched) [0000.110] I> ATE fuse revision : 0x200 [0000.113] I> Ram repair fuse : 0x0 [0000.116] I> Ram Code : 0x2 [0000.119] I> rst_source : 0x0 [0000.121] I> rst_level : 0x0 [0000.125] I> Boot-device: eMMC [0000.140] I> sdmmc DDR50 mode [0000.144] W> No valid slot number is found in scratch register [0000.149] W> Return default slot: _a [0000.153] I> Active Boot chain : 0 [0000.156] I> Boot-device: eMMC [0000.160] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.167] I> Temperature = 25000 [0000.170] W> Skipping boost for clk: BPMP_CPU_NIC [0000.175] W> Skipping boost for clk: BPMP_APB [0000.179] W> Skipping boost for clk: AXI_CBB [0000.183] W> Skipping boost for clk: AON_CPU_NIC [0000.187] W> Skipping boost for clk: CAN1 [0000.191] W> Skipping boost for clk: CAN2 [0000.195] I> Boot-device: eMMC [0000.198] I> Boot-device: eMMC [0000.207] I> Sdmmc: HS400 mode enabled [0000.212] I> ECC region[0]: Start:0x0, End:0x0 [0000.216] I> ECC region[1]: Start:0x0, End:0x0 [0000.220] I> ECC region[2]: Start:0x0, End:0x0 [0000.224] I> ECC region[3]: Start:0x0, End:0x0 [0000.228] I> ECC region[4]: Start:0x0, End:0x0 [0000.232] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.238] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.243] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.247] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.251] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.257] E> FAILED: Thermal config [0000.264] E> FAILED: MEMIO rail config [0000.282] I> Boot-device: eMMC [0000.292] I> sdmmc bdev is already initialized [0000.364] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.372] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-938a8cd8) [0000.373] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.374] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.374] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.380] W> device prod register failed [0000.384] I> Boot-device: eMMC [0000.387] I> Boot_device: SDMMC_BOOT instance: 3 [0000.393] I> sdmmc-3 params source = boot args [0000.396] I> sdmmc bdev is already initialized [0000.400] I> sdmmc-3 params source = boot args [0000.408] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.415] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.416] W> No valid slot number is found in scratch register [0000.421] W> Return default slot: _a [0000.424] I> Active Boot chain : 0 [0000.428] I> parsing oem signed section of bpmp-fw header done [0000.433] I> bpmp-fw binary init read from storage [0000.438] I> oem authentication of bpmp-fw header done [0000.445] I> bpmp-fw binary done read from storage [0000.447] I> bpmp-fw: Authentication init Done [0000.452] I> parsing oem signed section of cpubl header done [0000.457] I> cpubl binary init read from storage [0000.462] I> bpmp-fw: Authentication Finalize Done [0000.467] I> oem authentication of cpubl header done [0000.471] I> cpubl binary done read from storage [0000.476] I> cpubl: Authentication init Done [0000.481] I> parsing oem signed section of rce header done [0000.485] I> rce binary init read from storage [0000.490] I> Relocating BR-BCT [0000.492] I> cpubl: Authentication Finalize Done [0000.497] I> oem authentication of rce header done [0000.501] I> rce binary done read from storage [0000.506] I> rce: Authentication init Done [0000.510] I> parsing oem signed section of ape header done [0000.515] I> ape binary init read from storage [0000.519] I> rce: Authentication Finalize Done [0000.524] I> oem authentication of ape header done [0000.528] I> ape binary done read from storage [0000.532] I> ape: Authentication init Done [0000.537] I> parsing oem signed section of tos header done [0000.542] I> tos binary init read from storage [0000.546] I> ape: Authentication Finalize Done [0000.551] I> oem authentication of tos header done [0000.555] I> tos binary done read from storage [0000.559] I> tos: Authentication init Done [0000.563] I> parsing oem signed section of bpmp-fw-dtb header done [0000.569] I> bpmp-fw-dtb binary init read from storage [0000.574] I> tos: Authentication Finalize Done [0000.580] I> oem authentication of bpmp-fw-dtb header done [0000.587] I> bpmp-fw-dtb binary done read from storage [0000.589] I> bpmp-fw-dtb: Authentication init Done [0000.594] I> parsing oem signed section of cpubl-dtb header done [0000.599] I> cpubl-dtb binary init read from storage [0000.604] I> bpmp-fw-dtb: Authentication Finalize Done [0000.642] I> oem authentication of cpubl-dtb header done [0000.643] I> cpubl-dtb binary done read from storage [0000.643] I> cpubl-dtb: Authentication init Done [0000.645] I> parsing oem signed section of eks header done [0000.646] I> eks binary init read from storage [0000.646] I> cpubl-dtb: Authentication Finalize Done [0000.647] I> oem authentication of eks header done [0000.651] I> eks binary done read from storage [0000.655] I> eks: Authentication init Done [0000.659] I> eks: Authentication Finalize Done [0000.663] I> EKB detected (length: 0x410) @ VA:0x52700400 ��NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:32, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized �� [0001.167] I> Welcome to Cboot ��fmon_post initialized ��[0001.167] I> Cboot Version: t194-cfa2bc91 [0001.168] I> CPU-BL Params @ 0xf2820000 [0001.168] I> 0) Base:0x00000000 Size:0x00000000 [0001.172] I> 1) Base:0xf1100000 Size:0x00100000 [0001.176] I> 2) Base:0xf2000000 Size:0x00200000 [0001.180] I> 3) Base:0xf1200000 Size:0x00200000 ��clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ��[0001.185] I> 4) Base:0xf1000000 Size:0x00100000 [0001.264] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.269] I> 6) Base:0xf3800000 Size:0x00400000 [0001.273] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.278] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.282] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.287] I> 10) Base:0xf3000000 Size:0x00800000 [0001.291] I> 11) Base:0x40000000 Size:0x00040000 [0001.296] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.300] I> 13) Base:0x40046000 Size:0x00002000 [0001.305] I> 14) Base:0x40048000 Size:0x00002000��emc_debugfs initialized dvs_debugfs initialized �� [0001.314] I> 15) Base:0xac000000 Size:0x00004000 ��fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ��[0001.318] I> 16) Base:0x4004a000 Size:0x00002000 [0001.369] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.373] I> 18) Base:0x4004c000 Size:0x00002000 [0001.378] I> 19) Base:0xf2200000 Size:0x00600000 [0001.382] I> 20) Base:0x4004e000 Size:0x00002000 [0001.387] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.391] I> 22) Base:0x00000000 Size:0x00000000 [0001.395] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.400] I> 24) Base:0xf6000000 Size:0x02000000 [0001.404] I> 25) Base:0x40050000 Size:0x00002000 [0001.409] I> 26) Base:0x40040000 Size:0x00006000 [0001.413] I> 27) Base:0xf1800000 Size:0x00400000 [0001.418] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.422] I> 29) Base:0xf1400000 Size:0x00400000 [0001.427] I> 30) Base:0x00000000 Size:0x00000000 [0001.431] I> 31) Base:0x00000000 Size:0x00000000 [0001.436] I> 32) Base:0xf8000000 Size:0x08000000 [0001.440] I> 33) Base:0x00000000 Size:0x00000000 [0001.445] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.449] I> 35) Base:0xab000000 Size:0x01000000 [0001.453] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.458] I> 37) Base:0xf2800000 Size:0x00800000 [0001.462] I> 38) Base:0x80000000 Size:0x20000000 [0001.467] I> 39) Base:0xb0000000 Size:0x08000000 [0001.471] I> 40) Base:0x00000000 Size:0x00000000 [0001.476] I> 41) Base:0x00000000 Size:0x00000000 [0001.480] I> 42) Base:0x00000000 Size:0x00000000 [0001.485] I> 43) Base:0x00000000 Size:0x00000000 [0001.489] I> 44) Base:0x00000000 Size:0x00000000 [0001.494] I> 45) Base:0x00000000 Size:0x00000000 [0001.498] GIC-SPI Target CPU: 0 [0001.501] Interrupts Init done [0001.504] calling constructors [0001.507] initializing heap [0001.509] I> Heap: [0xa0699b80 ... 0xab000000] [0001.514] initializing threads [0001.517] initializing timers [0001.519] creating bootstrap completion thread [0001.524] top of bootstrap2() [0001.527] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.531] initializing platform [0001.534] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.540] W> device prod register failed [0001.543] I> Bl_dtb @0xaaf00000 [0001.550] W> "plugin-manager" doesn't exist, creating [0001.551] W> "ids" doesn't exist, creating [0001.556] W> "connection" doesn't exist, creating [0001.560] W> "configs" doesn't exist, creating [0001.571] E> failed to read label property for node 227172: 13 [0001.574] E> failed to read reg property for node 227260: 13 [0001.577] E> failed to read label property for node 227312: 13 [0001.583] E> failed to read label property for node 227380: 13 [0001.588] E> failed to read label property for node 227416: 13 [0001.594] E> failed to read label property for node 227452: 13 [0001.599] E> failed to read reg property for node 227520: 13 [0001.605] E> failed to read label property for node 227572: 13 [0001.611] I> Find /i2c@3160000's alias i2c0 [0001.613] I> Reading eeprom i2c=0 address=0x50 [0001.643] I> Device at /i2c@3160000:0x50 [0001.643] I> Reading eeprom i2c=0 address=0x56 [0001.667] I> Device at /i2c@3160000:0x56 [0001.669] I> Find /i2c@3180000's alias i2c2 [0001.669] I> Reading eeprom i2c=2 address=0x54 [0001.671] E> I2C: slave not found in slaves. [0001.671] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.672] E> I2C_DEV: Failed to send register address 0x00000000. [0001.672] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.682] E> eeprom: Failed to read I2C slave device [0001.686] I> Eeprom read failed 0x3526070d [0001.690] I> Reading eeprom i2c=2 address=0x57 [0001.695] E> I2C: slave not found in slaves. [0001.699] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.707] E> I2C_DEV: Failed to send register address 0x00000000. [0001.712] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.722] E> eeprom: Failed to read I2C slave device [0001.726] I> Eeprom read failed 0x3526070d [0001.730] I> Reading eeprom i2c=2 address=0x52 [0001.735] E> I2C: slave not found in slaves. [0001.739] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.747] E> I2C_DEV: Failed to send register address 0x00000000. [0001.752] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.762] E> eeprom: Failed to read I2C slave device [0001.766] I> Eeprom read failed 0x3526070d [0001.771] I> Find /i2c@c240000's alias i2c1 [0001.774] I> Reading eeprom i2c=1 address=0x52 [0001.780] E> I2C: slave not found in slaves. [0001.783] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.791] E> I2C_DEV: Failed to send register address 0x00000000. [0001.796] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.806] E> eeprom: Retry to read I2C slave device. [0001.811] E> I2C: slave not found in slaves. [0001.815] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.823] E> I2C_DEV: Failed to send register address 0x00000000. [0001.828] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.838] E> eeprom: Failed to read I2C slave device [0001.842] I> Eeprom read failed 0x3526070d [0001.846] I> Reading eeprom i2c=1 address=0x50 [0001.851] E> I2C: slave not found in slaves. [0001.855] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.863] E> I2C_DEV: Failed to send register address 0x00000000. [0001.868] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.878] E> eeprom: Retry to read I2C slave device. [0001.883] E> I2C: slave not found in slaves. [0001.887] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.895] E> I2C_DEV: Failed to send register address 0x00000000. [0001.900] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.910] E> eeprom: Failed to read I2C slave device [0001.914] I> Eeprom read failed 0x3526070d [0001.918] I> create_pm_ids: id: 2888-0004-400-M, len: 15 [0001.923] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.934] I> create_pm_ids: id: 2822-0000-700-K, len: 15 [0001.940] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.951] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0001.959] W> "i2c@3160000" doesn't exist, creating [0001.962] W> "module@0x50" doesn't exist, creating [0001.967] I> Adding plugin-manager/ids/2822-0000-700=/i2c@3160000:module@0x56 [0001.974] W> "module@0x56" doesn't exist, creating [0001.980] I> Adding plugin-manager/cvm [0001.982] W> "chip-id" doesn't exist, creating [0001.986] I> Adding plugin-manager/chip-id/A02P [0001.991] I> Plugin-manager override starting [0001.996] I> node /plugin-manager/fragement-tegra-wdt-en matches [0002.004] I> node /plugin-manager/fragement-soft-wdt matches [0002.012] I> node /plugin-manager/fragment-pcie-c5-rp matches [0002.016] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0002.026] I> Disable plugin-manager status in FDT [0002.027] I> Plugin-manager override finished successfully [0002.028] I> gpio framework initialized [0002.033] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0002.041] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.047] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.054] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.062] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.069] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.075] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.082] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.090] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.096] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.104] I> fixed regulator driver initialized [0002.115] I> register 'maxim' power off handle [0002.116] I> virtual i2c enabled [0002.116] I> registered 'maxim,max20024' pmic [0002.118] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.125] I> Boot-device: eMMC [0002.128] I> Boot_device: SDMMC_BOOT instance: 3 [0002.137] I> sdmmc-3 params source = boot args [0002.137] I> create_pm_ids: id: 2888-0004-400-M, len: 15 [0002.142] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.153] I> create_pm_ids: id: 2822-0000-700-K, len: 15 [0002.158] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.169] I> sdmmc bdev is already initialized [0002.173] I> sdmmc-3 params source = boot args [0002.204] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.217] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.227] I> enabling 'vdd-hdmi-5v0' regulator [0002.233] I> regulator 'vdd-hdmi-5v0' already enabled [0002.233] E> tegrabl_display_init_regulator: hdmi cable is not connected [0002.234] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.238] E> invalid display type [0002.243] E> invalid display type [0002.244] E> cannot find any other nvdisp nodes [0002.244] E> no valid display unit config found in dtb [0002.246] W> display init failed [0002.246] I> Load in CBoot Boot Options partition and parse it [0002.256] E> Error -9 when finding node with path /boot-configuration [0002.256] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.264] I> Using default boot order [0002.267] I> boot-dev-order :- [0002.270] I> 1.sd [0002.272] I> 2.usb [0002.273] I> 3.nvme [0002.275] I> 4.emmc [0002.277] I> 5.net [0002.279] I> Hit any key to stop autoboot: 4 3 2 1 [0004.287] initializing target [0004.287] calling apps_init() [0004.288] starting app kernel_boot_app [0004.307] I> found decompressor handler: lz4-legacy [0004.308] I> decompressing BMP blob ... [0004.319] I> Kernel type = Normal [0004.320] I> ########## SD (0) boot ########## [0004.320] I> No sdcard [0004.320] I> -0 params source = [0004.320] E> Blockdev open: exit error [0004.321] E> SD boot failed, err: 724238353 [0004.321] I> ########## USB (0) boot ########## [0004.326] W> No valid slot number is found in scratch register [0004.326] W> Return default slot: _a [0004.334] I> Validate XUSB-FW ... [0004.335] I> T19x: Authenticate XUSB-FW (bin_type: 11), max size 0x28000 [0004.339] I> Encryption fuse is not ON [0004.342] I> USB Firmware Version: 60.09 release [0004.401] I> regulator of usb2-0 already enabled [0004.409] I> regulator of usb2-1 already enabled [0004.417] I> regulator of usb2-2 already enabled [0004.426] I> enabling 'vdd-5v-sata' regulator [0005.494] I> USB 2.0 port 4 new high-speed USB device detected [0005.496] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa42ce200, cmd_ring.dma = 0xa42ce240 [0005.597] I> Start to enumerate device [0005.598] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa42ce200, cmd_ring.dma = 0xa42ce240 [0005.603] I> [0005.603] I> Enumerated USB Device 05e3:0610 [0005.603] I> [0005.605] I> Hub: [0005.605] I> Downstream ports : 4 [0005.605] I> Power switching : Ganged [0005.605] I> Compound device : No [0005.606] I> Over-current protection : Global [0005.610] I> Hub avg delay : 4 ns [0005.614] I> Set interface = 1 (alt setting) [0005.619] I> Enable hub ports [0005.623] W> handle_transfer_event: WARNING: Command was not successfully completed (0x04) [0008.685] W> xusbh_wait_irq: Timed out! status = 0x00 [0011.693] W> xusbh_wait_irq: Timed out! status = 0x00 [0011.694] E> Failed to set power feature for port 4 [0011.694] E> Failed to initialize hub [0011.694] E> failed to start xhci controller [0011.695] E> Error in init of XUSB host driver, err: 7979000c [0011.695] W> Failed to initialize device 5-0 [0011.696] E> USB boot failed, err: 2037973004 [0011.700] I> ########## NVME (0) boot ########## [0011.704] I> Initializing nvme device instance 0 [0011.708] I> Initializing nvme controller [0011.712] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0011.719] I> vpcie3v3-supply not found [0011.722] I> vpcie12v-supply not found [0011.726] W> Failed to get nvidia,plat-gpios [0011.730] I> tegrabl_pcie_soc_preinit: (0): [0011.734] I> Unpowergate [0011.737] I> tegrabl_car_clk_disable(0) ... [0011.740] I> tegrabl_car_rst_set(CORE, 0) ... [0011.745] I> tegrabl_car_rst_set(APB, 0) ... [0011.749] I> tegrabl_car_clk_enable(0) ... [0011.753] I> tegrabl_car_rst_clear(APB, 0) ... [0011.757] I> tegrabl_set_ctrl_state(0) [0011.761] I> CLR PCIE_APB:6 [0011.763] I> tegrabl_pcie_soc_init: (0): [0011.767] I> APPL initialization ... [0011.770] I> poweron phys [0011.773] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0011.779] I> tegrabl_power_on_phy: power on phy @0x3e30000 [0011.785] I> tegrabl_power_on_phy: power on phy @0x3e40000 [0011.790] I> tegrabl_power_on_phy: power on phy @0x3e50000 [0011.795] I> tegrabl_power_on_phy: power on phy @0x3e60000 [0012.901] C> Failed to link up controller-0 [0012.901] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0012.902] I> Failed to initialize SoC Host PCIe controller [0012.902] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(0); error=0x12 [0012.903] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0012.903] W> Failed to open NVME-0, err = 80800612 [0012.908] W> Failed to initialize device 10-0 [0012.912] E> NVME (0) boot failed, err: 0x80800612 [0012.916] I> ########## NVME (1) boot ########## [0012.921] I> Initializing nvme device instance 1 [0012.925] I> Initializing nvme controller [0012.929] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0012.936] I> vpcie3v3-supply not found [0012.939] I> vpcie12v-supply not found [0012.943] W> Failed to get nvidia,plat-gpios [0012.947] I> tegrabl_pcie_soc_preinit: (1): [0012.951] I> Unpowergate [0012.953] I> tegrabl_car_clk_disable(1) ... [0012.957] I> tegrabl_car_rst_set(CORE, 1) ... [0012.962] I> tegrabl_car_rst_set(APB, 1) ... [0012.966] I> tegrabl_car_clk_enable(1) ... [0012.970] I> tegrabl_car_rst_clear(APB, 1) ... [0012.974] I> tegrabl_set_ctrl_state(1) [0012.978] I> CLR PCIE_APB:6 [0012.980] I> tegrabl_pcie_soc_init: (1): [0012.984] I> APPL initialization ... [0012.987] I> poweron phys [0012.990] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0012.996] I> tegrabl_power_on_phy: power on phy @0x3e10000 [0013.103] I> PCIe controller-1 link is up [0013.103] I> tegra_pcie_info[1].cfg0_base = 0x30000000 [0013.104] I> tegra_pcie_info[1].cfg1_base = 0x30020000 [0013.104] I> tegra_pcie_info[1].atu_dma_base = 0x30040000 [0013.105] I> tegra_pcie_bus[1].mem = 0x30200000 [0013.105] I> Scanning busnr: 0 devfn: 0 [0013.105] I> PCIe IDs: 0x1ad210de [0013.108] I> PCIe RID_CC: 0x60400a1 [0013.112] I> Scanning busnr: 1 devfn: 0 [0013.115] I> PCIe IDs: 0x91711b4b [0013.118] I> PCIe RID_CC: 0x1060113 [0013.122] I> PCI Config: I/O=0x30100000, Memory=0x30200000 [0013.127] I> IO bar_num=0 bar=0x30100000 [0013.131] I> IO bar_num=1 bar=0x30100008 [0013.135] I> IO bar_num=2 bar=0x30100010 [0013.138] I> IO bar_num=3 bar=0x30100018 [0013.142] I> IO bar_num=4 bar=0x30100020 [0013.146] I> MEM bar_num=5 bar=0x30200000 [0013.150] I> Number of PCIe devices detected: 2 [0013.154] E> tegrabl_nvme_init: Failed tegrabl_pcie_get_dev(1); error=0x0 [0013.161] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0013.167] W> Failed to open NVME-1, err = 80800612 [0013.172] W> Failed to initialize device 10-1 [0013.176] E> NVME (1) boot failed, err: 0x80800612 [0013.181] I> ########## NVME (2) boot ########## [0013.185] I> Initializing nvme device instance 2 [0013.190] I> Initializing nvme controller [0013.194] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0013.200] I> vpcie3v3-supply not found [0013.204] I> vpcie12v-supply not found [0013.207] W> Failed to get nvidia,plat-gpios [0013.211] I> tegrabl_pcie_soc_preinit: (2): [0013.215] I> Unpowergate [0013.218] I> tegrabl_car_clk_disable(2) ... [0013.222] I> tegrabl_car_rst_set(CORE, 2) ... [0013.226] I> tegrabl_car_rst_set(APB, 2) ... [0013.230] I> tegrabl_car_clk_enable(2) ... [0013.234] I> tegrabl_car_rst_clear(APB, 2) ... [0013.238] I> tegrabl_set_ctrl_state(2) [0013.242] I> CLR PCIE_APB:6 [0013.245] I> tegrabl_pcie_soc_init: (2): [0013.248] I> APPL initialization ... [0013.252] I> poweron phys [0013.254] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0013.260] I> tegrabl_power_on_phy: controller 2 not available [0013.266] E> Failed to power on phy on controller-2 [0013.271] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0013.276] I> Failed to initialize SoC Host PCIe controller [0013.281] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(2); error=0x1 [0013.287] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0013.294] W> Failed to open NVME-2, err = 80800601 [0013.299] W> Failed to initialize device 10-2 [0013.303] E> NVME (2) boot failed, err: 0x80800601 [0013.307] I> ########## NVME (3) boot ########## [0013.312] I> Initializing nvme device instance 3 [0013.316] I> Initializing nvme controller [0013.321] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0013.327] I> vpcie3v3-supply not found [0013.330] I> vpcie12v-supply not found [0013.334] W> Failed to get nvidia,plat-gpios [0013.338] I> tegrabl_pcie_soc_preinit: (3): [0013.342] I> Unpowergate [0013.344] I> tegrabl_car_clk_disable(3) ... [0013.348] I> tegrabl_car_rst_set(CORE, 3) ... [0013.353] I> tegrabl_car_rst_set(APB, 3) ... [0013.357] I> tegrabl_car_clk_enable(3) ... [0013.361] I> tegrabl_car_rst_clear(APB, 3) ... [0013.365] I> tegrabl_set_ctrl_state(3) [0013.368] I> CLR PCIE_APB:6 [0013.371] I> tegrabl_pcie_soc_init: (3): [0013.375] I> APPL initialization ... [0013.378] I> poweron phys [0013.381] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0013.387] I> tegrabl_power_on_phy: power on phy @0x3e80000 [0014.492] C> Failed to link up controller-3 [0014.493] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0014.494] I> Failed to initialize SoC Host PCIe controller [0014.494] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(3); error=0x12 [0014.494] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0014.495] W> Failed to open NVME-3, err = 80800612 [0014.499] W> Failed to initialize device 10-3 [0014.504] E> NVME (3) boot failed, err: 0x80800612 [0014.508] I> ########## NVME (4) boot ########## [0014.513] I> Initializing nvme device instance 4 [0014.517] I> Initializing nvme controller [0014.522] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0014.527] I> vpcie3v3-supply not found [0014.531] I> vpcie12v-supply not found [0014.535] W> Failed to get nvidia,plat-gpios [0014.539] I> tegrabl_pcie_soc_preinit: (4): [0014.543] I> Unpowergate [0014.545] I> tegrabl_car_clk_disable(4) ... [0014.549] I> tegrabl_car_rst_set(CORE, 4) ... [0014.553] I> tegrabl_car_rst_set(APB, 4) ... [0014.558] I> tegrabl_car_clk_enable(4) ... [0014.561] I> tegrabl_car_rst_clear(APB, 4) ... [0014.566] I> tegrabl_set_ctrl_state(4) [0014.569] I> CLR PCIE_APB:6 [0014.572] I> tegrabl_pcie_soc_init: (4): [0014.576] I> APPL initialization ... [0014.579] I> poweron phys [0014.582] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0014.588] I> tegrabl_power_on_phy: controller 4 not available [0014.594] E> Failed to power on phy on controller-4 [0014.599] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0014.603] I> Failed to initialize SoC Host PCIe controller [0014.609] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(4); error=0x1 [0014.615] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0014.621] W> Failed to open NVME-4, err = 80800601 [0014.626] W> Failed to initialize device 10-4 [0014.630] E> NVME (4) boot failed, err: 0x80800601 [0014.635] I> ########## NVME (5) boot ########## [0014.639] I> Initializing nvme device instance 5 [0014.644] I> Initializing nvme controller [0014.648] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0014.654] I> i=0, reg_phandle=0x1b [0014.660] I> reg_voltage=3300000 [0014.660] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1b, 3300000) [0014.672] I> enabling 'vdd-3v3-pcie' regulator [0014.673] I> i=1, reg_phandle=0x1c [0014.678] I> reg_voltage=1200000 [0014.678] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1c, 1200000) [0014.690] I> enabling 'vdd-12v-pcie' regulator [0014.691] I> tegrabl_pcie_soc_preinit: (5): [0014.694] I> Unpowergate [0014.697] I> tegrabl_car_clk_disable(5) ... [0014.700] I> tegrabl_car_rst_set(CORE, 5) ... [0014.705] I> tegrabl_car_rst_set(APB, 5) ... [0014.709] I> tegrabl_car_clk_enable(5) ... [0014.713] I> tegrabl_car_rst_clear(APB, 5) ... [0014.717] I> tegrabl_set_ctrl_state(5) [0014.720] I> CLR PCIE_APB:6 [0014.723] I> tegrabl_pcie_soc_init: (5): [0014.727] I> APPL initialization ... [0014.730] I> poweron phys [0014.733] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0014.739] I> tegrabl_power_on_phy: power on phy @0x3eb0000 [0014.745] I> tegrabl_power_on_phy: power on phy @0x3ec0000 [0014.750] I> tegrabl_power_on_phy: power on phy @0x3ed0000 [0014.755] I> tegrabl_power_on_phy: power on phy @0x3ee0000 [0014.761] I> tegrabl_power_on_phy: power on phy @0x3ef0000 [0014.766] I> tegrabl_power_on_phy: power on phy @0x3f00000 [0014.771] I> tegrabl_power_on_phy: power on phy @0x3f10000 [0014.777] I> tegrabl_power_on_phy: power on phy @0x3f20000 [0015.882] C> Failed to link up controller-5 [0015.883] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0015.883] I> Failed to initialize SoC Host PCIe controller [0015.883] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(5); error=0x12 [0015.884] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0015.884] W> Failed to open NVME-5, err = 80800612 [0015.889] W> Failed to initialize device 10-5 [0015.893] E> NVME (5) boot failed, err: 0x80800612 [0015.898] I> ########## Fixed storage boot ########## [0015.903] I> Loading kernel-bootctrl from partition [0015.907] I> Loading partition kernel-bootctrl at 0xa4320000 from device(0x1) [0015.921] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0015.921] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0015.934] I> Already published: 00010003 [0015.935] I> Look for boot partition [0015.936] I> Fallback: assuming 0th partition is boot partition [0015.941] I> Detect filesystem [0015.968] I> Loading extlinux.conf ... [0015.969] I> Loading extlinux.conf binary from rootfs ... [0015.969] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0016.018] I> Loading extlinux.conf sig file from rootfs ... [0016.018] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf.sig [0016.055] I> overload load_size to 864 (from 992) [0016.056] I> Validate extlinux.conf ... [0016.056] I> T19x: Authenticate extlinux.conf (bin_type: 54), max size 0x2000 [0016.057] E> digest on binary did not match!! [0016.057] C> OEM authentication of extlinux.conf payload failed! [0016.057] W> Failed to validate extlinux.conf binary from rootfs (err=1077936152, fail=0) [0016.064] W> Security fuse not burned, ignore validation failure [0016.069] I> restore load_size to 992 [0016.073] I> L4T boot options [0016.076] I> [1]: "primary kernel" [0016.079] I> [2]: "mainline kernel" [0016.082] I> Enter choice: [0019.086] I> Continuing with default option: 1 [0019.086] I> Loading kernel ... [0019.086] I> Loading kernel binary from rootfs ... [0019.086] I> rootfs path: /sdmmc_user/boot/Image [0019.312] I> Loading kernel sig file from rootfs ... [0019.312] I> rootfs path: /sdmmc_user/boot/Image.sig [0019.337] I> overload load_size to 34484232 (from 34484240) [0019.337] I> Validate kernel ... [0019.338] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0019.652] I> Encryption fuse is not ON [0019.667] I> Loading kernel-dtb ... [0019.667] I> No kernel-dtb binary path [0019.667] I> Continue to load from partition ... [0019.668] W> No valid slot number is found in scratch register [0019.668] W> Return default slot: _a [0019.668] I> A/B: bin_type (38) slot 0 [0019.669] I> Loading kernel-dtb from partition [0019.670] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0019.685] I> Validate kernel-dtb ... [0019.685] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0019.687] I> Encryption fuse is not ON [0019.691] I> Loading ramdisk from rootfs ... [0019.695] I> Loading ramdisk binary from rootfs ... [0019.699] I> rootfs path: /sdmmc_user/boot/initrd [0019.780] I> Loading ramdisk sig file from rootfs ... [0019.781] I> rootfs path: /sdmmc_user/boot/initrd.sig [0019.811] I> overload load_size to 7238344 (from 7238352) [0019.812] I> Validate ramdisk ... [0019.812] I> T19x: Authenticate ramdisk (bin_type: 54), max size 0x4000000 [0019.878] I> Encryption fuse is not ON [0019.886] I> Kernel hdr @0xa4320000 [0019.886] I> Kernel dtb @0x90000000 [0019.886] I> decompressor handler not found [0019.887] I> Copying kernel image (34484232 bytes) from 0xa4320000 to 0x80080000 ... [0019.893] I> Done [0019.893] I> Updated bpmp info to DTB [0019.893] I> Ramdisk: Base: 0x92000000; Size: 0x6e72c8 [0019.894] I> Updated initrd info to DTB [0019.894] W> WARN: Fail to override "console=none" in commandline [0019.899] I> Active rootfs suffix: [0019.902] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0019.909] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0019.917] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0019.924] W> No valid slot number is found in scratch register [0019.930] W> Return default slot: _a [0019.933] I> Active slot suffix: [0019.936] I> add_boot_slot_suffix: slot_suffix = [0019.941] I> Linux Cmdline: console=ttyS0,115200n8 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0019.965] I> Updated bootarg info to DTB [0019.969] W> MAC addr invalid! [0019.972] E> Failed to get WIFI MAC address [0019.976] W> MAC addr invalid! [0019.979] E> Failed to get Bluetooth MAC address [0019.983] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:3a:a5:68 [0019.990] W> "plugin-manager" doesn't exist, creating [0019.994] I> Adding /chosen/plugin-manager/cvm [0019.998] W> "chip-id" doesn't exist, creating [0020.003] I> Adding /chosen/plugin-manager/chip-id [0020.007] W> "configs" doesn't exist, creating [0020.012] I> Adding /chosen/plugin-manager/configs [0020.016] W> "ids" doesn't exist, creating [0020.020] I> Adding /chosen/plugin-manager/ids [0020.025] W> "odm-data" doesn't exist, creating [0020.029] I> Adding /chosen/plugin-manager/odm-data [0020.034] W> "memory" doesn't exist, creating [0020.038] I> [0] START: 0x80000000, END: 0xac000000 [0020.043] I> [1] START: 0xac004000, END: 0xf0ad0000 [0020.047] I> [2] START: 0xf0adc000, END: 0xf0ae0000 [0020.052] I> dram_block larger than 80000000 [0020.056] I> [3] START: 0x100000000, END: 0x880000000 [0020.061] I> added [base:0x80000000, size:0x2c000000] to /memory [0020.067] I> added [base:0xac200000, size:0x44800000] to /memory [0020.073] I> added [base:0x100000000, size:0x780000000] to /memory [0020.079] I> Updated memory info to DTB [0020.083] W> "reserved-memory" doesn't exist, creating [0020.088] E> add_disp_param: failed to get display params for du=0 [0020.094] W> "reset" doesn't exist, creating [0020.098] I> Adding ecid(0000000164017147080000000d020240) to DT [0020.104] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0020.108] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0020.113] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0020.118] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0020.122] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0020.127] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0020.132] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0020.137] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0020.141] E> /cpus/cpu-map does not exist [0020.145] W> "arm-pmu" doesn't exist, creating [0020.149] W> "grid-of-semaphores" doesn't exist, creating [0020.155] W> "misc-data" doesn't exist, creating [0020.159] I> Boot-device: eMMC [0020.162] I> Add boot-sdmmc to plugin-manager/misc-data [0020.167] I> Add storage-sdmmc to plugin-manager/misc-data [0020.172] W> Unknown storage device [0020.176] I> Add serial number:1561221004864 as DT property [0020.181] I> Plugin-manager override starting [0020.185] W> Failed to find /plugin-manager in DT [0020.190] I> tegrabl_load_kernel_and_dtb: Done [0020.194] E> tegrabl_display_clear: display is not initialized [0020.200] W> Boot logo display failed... [0020.204] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] OF: fdt:Reserved memory: unsupported node format, ignoring