[0000.189] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-1b8ce67c) [0000.198] I> bit @ 0xd480000 [0000.201] I> Boot-device: eMMC [0000.204] I> sdmmc bdev is already initialized [0000.209] I> pmic: reset reason (nverc) : 0x0 [0000.216] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0000.223] I> Found 31 partitions in SDMMC_USER (instance 3) [0000.229] I> A/B: bin_type (16) slot 0 [0000.233] I> Loading partition bpmp-fw at 0xd7800000 [0000.238] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.243] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.258] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.264] I> A/B: bin_type (17) slot 0 [0000.268] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.273] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.278] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.292] I> Binary(17) of size 465840 is loaded @ 0xd798e200 [0000.470] I> Loading SCE-FW ... [0000.473] I> A/B: bin_type (12) slot 0 [0000.477] I> Loading partition sce-fw at 0xd7300000 [0000.482] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.487] I> Addr: 0xd7300000, start-block: 58782024, num_blocks: 1 [0000.496] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.502] I> Init SCE [0000.505] I> Loading APE-FW ... [0000.508] I> A/B: bin_type (11) slot 0 [0000.511] I> Loading partition adsp-fw at 0xd7400000 [0000.516] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.521] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.531] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.537] I> Copy BTCM section [0000.540] I> A/B: bin_type (13) slot 0 [0000.543] I> Loading partition cpu-bootloader at 0x96000000 [0000.549] I> Reading two headers - addr:0x96000000 blocks:1 [0000.554] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.565] I> Binary(13) of size 277776 is loaded @ 0x96000000 [0000.571] I> A/B: bin_type (20) slot 0 [0000.575] I> Loading partition bootloader-dtb at 0x8520f400 [0000.580] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.586] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.598] I> Binary(20) of size 344080 is loaded @ 0x8520f400 [0000.604] I> A/B: bin_type (14) slot 0 [0000.607] I> Loading partition secure-os at 0x8530f600 [0000.612] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.618] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.630] I> Binary(14) of size 312752 is loaded @ 0x8530f600 [0000.637] I> TOS boot-params @ 0x85000000 [0000.641] I> TOS params prepared [0000.644] I> Loading EKS ... [0000.647] I> A/B: bin_type (15) slot 0 [0000.651] I> Loading partition eks at 0x8590f800 [0000.655] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.661] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0000.668] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.674] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.679] I> Copied encrypted keys [0000.683] I> boot profiler @ 0x275844000 [0000.686] I> boot profiler for TOS @ 0x275844000 [0000.691] I> Unhalting SCE [0000.694] I> Primary Memory Start:80000000 Size:70000000 [0000.699] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.706] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):a28d87f09 NOTICE: BL31: Built : 21:15:42, Aug 12 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea87ad58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete [0001.066] I> Welcome to Cboot [0001.069] I> Cboot Version: t186-dcb303f9 [0001.073] I> CPU-BL Params @ 0x275800000 [0001.077] I> 0) Base:0x00000000 Size:0x00000000 [0001.081] I> 1) Base:0x277f00000 Size:0x00100000 [0001.086] I> 2) Base:0x277e00000 Size:0x00100000 [0001.090] I> 3) Base:0x277d00000 Size:0x00100000 [0001.095] I> 4) Base:0x277c00000 Size:0x00100000 [0001.099] I> 5) Base:0x277b00000 Size:0x00100000 [0001.104] I> 6) Base:0x277800000 Size:0x00200000 [0001.108] I> 7) Base:0x277400000 Size:0x00400000 [0001.113] I> 8) Base:0x277a00000 Size:0x00100000 [0001.117] I> 9) Base:0x277300000 Size:0x00100000 [0001.122] I> 10) Base:0x276800000 Size:0x00800000 [0001.126] I> 11) Base:0x30000000 Size:0x00040000 [0001.131] I> 12) Base:0xf0000000 Size:0x00100000 [0001.135] I> 13) Base:0x30040000 Size:0x00001000 [0001.140] I> 14) Base:0x30048000 Size:0x00001000 [0001.144] I> 15) Base:0x30049000 Size:0x00001000 [0001.148] I> 16) Base:0x3004a000 Size:0x00001000 [0001.153] I> 17) Base:0x3004b000 Size:0x00001000 [0001.157] I> 18) Base:0x3004c000 Size:0x00001000 [0001.162] I> 19) Base:0x3004d000 Size:0x00001000 [0001.166] I> 20) Base:0x3004e000 Size:0x00001000 [0001.171] I> 21) Base:0x3004f000 Size:0x00001000 [0001.175] I> 22) Base:0x00000000 Size:0x00000000 [0001.179] I> 23) Base:0xf0100000 Size:0x00010000 [0001.184] I> 24) Base:0x00000000 Size:0x00000000 [0001.188] I> 25) Base:0x00000000 Size:0x00000000 [0001.193] I> 26) Base:0x00000000 Size:0x00000000 [0001.197] I> 27) Base:0x00000000 Size:0x00000000 [0001.202] I> 28) Base:0x84400000 Size:0x00400000 [0001.206] I> 29) Base:0x30000000 Size:0x00010000 [0001.210] I> 30) Base:0x278000000 Size:0x08000000 [0001.215] I> 31) Base:0x00000000 Size:0x00000000 [0001.219] I> 32) Base:0x276000000 Size:0x00600000 [0001.224] I> 33) Base:0x80000000 Size:0x70000000 [0001.228] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.233] I> 35) Base:0x00000000 Size:0x00000000 [0001.237] I> 36) Base:0x00000000 Size:0x00000000 [0001.242] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.246] I> 38) Base:0x84000000 Size:0x00400000 [0001.251] I> 39) Base:0x96000000 Size:0x02000000 [0001.255] I> 40) Base:0x85000000 Size:0x01200000 [0001.260] I> 41) Base:0x275800000 Size:0x00500000 [0001.264] I> 42) Base:0x00000000 Size:0x00000000 [0001.268] I> 43) Base:0x00000000 Size:0x00000000 [0001.273] GIC-SPI Target CPU: 4 [0001.276] Interrupts Init done [0001.280] calling constructors [0001.283] initializing heap [0001.285] initializing threads [0001.289] initializing timers [0001.292] creating bootstrap completion thread [0001.297] top of bootstrap2() [0001.300] CPU: ARM Cortex A57 [0001.303] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.308] initializing platform [0001.312] I> Boot-device: eMMC [0001.315] I> sdmmc bdev is already initialized [0001.321] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0001.328] I> Found 31 partitions in SDMMC_USER (instance 3) [0001.333] W> opt-in fuse is not set, skip fuse_burning [0001.338] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.345] I> A/B: bin_type (21) slot 1 [0001.348] I> Loading partition kernel-dtb_b at 0x80000000 from device(0x1) [0001.362] I> Kernel_dtb @0x80000000 [0001.365] I> Bl_dtb @0x8520f400 [0001.368] I> gpio framework initialized [0001.374] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.384] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.392] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.400] E> I2C: slave not found in slaves. [0001.404] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0001.412] E> I2C_DEV: Failed to send register address 0x00000004. [0001.418] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0001.427] E> tca9539_device_init: failed to write polar reg [0001.433] E> tegrabl_tca9539_init: failed to init device! [0001.438] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.445] E> I2C: slave not found in slaves. [0001.449] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0001.456] E> I2C_DEV: Failed to send register address 0x00000004. [0001.462] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0001.472] E> tca9539_device_init: failed to write polar reg [0001.477] E> tegrabl_tca9539_init: failed to init device! [0001.485] I> fixed regulator driver initialized [0001.516] I> register 'maxim' power off handle [0001.522] I> virtual i2c enabled [0001.525] I> registered 'maxim,max77620' pmic [0001.530] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.542] I> Find /i2c@c250000's alias i2c7 [0001.546] I> Reading eeprom i2c=7 address=0x50 [0001.576] I> Device at /i2c@c250000:0x50 [0001.579] I> Reading eeprom i2c=7 address=0x57 [0001.584] E> I2C: slave not found in slaves. [0001.588] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.596] E> I2C_DEV: Failed to send register address 0x00000000. [0001.602] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.611] E> eeprom: Failed to read I2C slave device [0001.616] I> Eeprom read failed 0x3526070d [0001.620] I> Find /i2c@c240000's alias i2c1 [0001.624] I> Reading eeprom i2c=1 address=0x51 [0001.630] E> I2C: slave not found in slaves. [0001.634] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.641] E> I2C_DEV: Failed to send register address 0x00000000. [0001.647] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.657] E> eeprom: Retry to read I2C slave device. [0001.662] E> I2C: slave not found in slaves. [0001.666] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.674] E> I2C_DEV: Failed to send register address 0x00000000. [0001.679] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.689] E> eeprom: Failed to read I2C slave device [0001.694] I> Eeprom read failed 0x3526070d [0001.698] I> Find /i2c@3160000's alias i2c0 [0001.702] I> Reading eeprom i2c=0 address=0x50 [0001.707] E> I2C: slave not found in slaves. [0001.711] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.718] E> I2C_DEV: Failed to send register address 0x00000000. [0001.724] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.734] E> eeprom: Failed to read I2C slave device [0001.739] I> Eeprom read failed 0x3526070d [0001.743] I> Find /i2c@3180000's alias i2c2 [0001.747] I> Reading eeprom i2c=2 address=0x54 [0001.752] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.756] C> GPIO driver for chip_id 0x2 could not be found [0001.762] E> cam_eeprom_read: Can't get gpio driver [0001.767] I> Eeprom read failed 0x4d4d000d [0001.770] I> Reading eeprom i2c=2 address=0x57 [0001.775] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.779] C> GPIO driver for chip_id 0x2 could not be found [0001.785] E> cam_eeprom_read: Can't get gpio driver [0001.790] I> Eeprom read failed 0x4d4d000d [0001.793] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0001.799] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.831] I> enabling 'vdd-hdmi' regulator [0001.835] E> tegrabl_display_get_pdata, failed to parse dtb settings [0001.843] E> cannot find any other nvdisp nodes [0001.848] E> no valid display unit config found in dtb [0001.853] W> display init failed [0001.857] initializing target [0001.860] calling apps_init() [0001.863] starting app kernel_boot_app [0001.869] I> found decompressor handler: lz4-legacy [0001.874] I> decompressing BMP blob ... [0001.884] I> Kernel type = Normal [0001.887] I> Loading kernel from partition ... [0001.891] I> A/B: bin_type (24) slot 1 [0001.896] I> Boot image size read from image header: f2d10 [0001.901] I> Boot image load address: 0x0x80400000 [0001.906] I> Loading partition kernel_b at 0x80400000 from device(0x1) [0002.667] I> Kernel hdr @0x80400000 [0002.671] I> Kernel dtb @0x80000000 [0002.674] I> T18x: Authenticate boot.img (bin_type 24), max size 0x4000000 [0002.682] I> T18x: Authenticate tegra194-p2888-0001-p2822-0000.dtb (bin_type 21), max size 0x100000 [0002.691] I> Checking boot.img header magic ... [0002.696] I> [OK] [0002.697] I> Valid boot.img @ 0x80400000 [0002.701] I> decompressor handler not found [0002.705] I> Copying kernel image (477378 bytes) from 0x80400800 to 0x80800000 ... [0002.713] I> Done [0002.714] I> Move ramdisk (len: 0) from 0x80475800 to 0x94830000 [0002.722] I> Updated bpmp info to DTB [0002.727] I> Ramdisk: Base: 0x94830000; Size: 0x0 [0002.732] I> Updated initrd info to DTB [0002.736] W> WARN: Fail to override "console=none" in commandline [0002.742] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.749] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.756] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.763] I> disabled_core_mask: 0xffffff0c [0002.767] I> Active slot suffix: _b [0002.770] I> add_boot_slot_suffix: slot_suffix = _b [0002.775] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS2,115200n8 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0xc280000 nvdumper_reserv [0002.811] I> Updated bootarg info to DTB [0002.814] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:c6:7f:5b [0002.821] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:c6:7f:5c [0002.827] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:c6:7f:5d [0002.835] E> Found no plugin manager ids in source DT [0002.840] W> Add plugin manager ids from board info [0002.844] E> "plugin-manager" doesn't exist, creating [0002.849] E> "ids" doesn't exist, creating [0002.853] E> "connection" doesn't exist, creating [0002.858] E> "configs" doesn't exist, creating [0002.862] I> create_pm_ids: id: 3310-1000-D01-B, len: 15 [0002.867] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.878] I> Adding plugin-manager/ids/3310-1000-D01=/i2c@c250000:module@0x50 [0002.886] E> "i2c@c250000" doesn't exist, creating [0002.890] E> "module@0x50" doesn't exist, creating [0002.897] I> Adding plugin-manager/ids/3310-1000-D01-B [0002.904] I> Adding plugin-manager/configs/3310-mem-type 00 [0002.910] I> Adding plugin-manager/configs/3310-power-config 00 [0002.916] I> Adding plugin-manager/configs/3310-misc-config 00 [0002.921] I> Adding plugin-manager/configs/3310-modem-config 00 [0002.927] I> Adding plugin-manager/configs/3310-touch-config 00 [0002.933] I> Adding plugin-manager/configs/3310-display-config 00 [0002.939] I> Adding plugin-manager/cvm [0002.943] E> "chip-id" doesn't exist, creating [0002.948] I> Adding plugin-manager/chip-id/A02P [0002.952] E> "odm-data" doesn't exist, creating [0002.957] I> Adding /chosen/plugin-manager/odm-data [0002.966] I> added [base:0x80000000, size:0x70000000] to /memory [0002.972] I> added [base:0xf0200000, size:0x185600000] to /memory [0002.978] I> added [base:0x275e00000, size:0x200000] to /memory [0002.984] I> added [base:0x276600000, size:0x200000] to /memory [0002.989] I> added [base:0x277000000, size:0x200000] to /memory [0002.995] I> Updated memory info to DTB [0003.000] E> add_disp_param: failed to get display params for du=0 [0003.007] E> "reset" doesn't exist, creating [0003.012] E> "pmc-reset-reason" doesn't exist, creating [0003.017] E> "pmic-reset-reason" doesn't exist, creating [0003.023] I> Adding ecid(00000001645118400400000013060300) to DT [0003.029] I> disabled_core_mask: 0xffffff0c [0003.042] I> Add serial number:0424718067225 as DT property [0003.051] I> Plugin-manager override starting [0003.056] I> node /plugin-manager/fragement@0 matches [0003.066] I> node /plugin-manager/fragement@4 matches [0003.079] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.097] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.107] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.115] I> node /plugin-manager/fragment-devslp@0 matches [0003.127] I> node /plugin-manager/fragment-500-pcie-config matches [0003.141] I> node /plugin-manager/fragment-500-xusb-config matches [0003.163] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.176] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.186] I> node /plugin-manager/fragment-p3310-c01 matches [0003.199] I> node /plugin-manager/fragment-p3310-c03 matches [0003.235] I> node /plugin-manager/fragment-p3310-c00-camera matches [0003.260] I> Disable plugin-manager status in FDT [0003.265] I> Plugin-manager override finished successfully [0003.270] I> tegrabl_load_kernel_and_dtb: Done [0003.275] E> tegrabl_display_clear: display is not initialized [0003.280] W> Boot logo display failed... [0003.338] I> Kernel EP: 0x80800000, DTB: 0x80000000 [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140 (ashlinsurey@ashlinsurey-PC) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #3 SMP PREEMPT Tue 0 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x000000000c280000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.509472] pca953x 0-0074: failed reading register [ 0.515396] pca953x 0-0077: failed reading register [ 1.092661] tegradc 15210000.nvdisplay: dc_hdmi_hotplug_init: couldn't get regulator vdd_hdmi_5v0, -517 [ 1.317815] FAN: coudln't get the regulator cp: not writing through dangling symlink 'etc/resolv.conf' [ 3.826792] cgroup: cgroup2: unknown option "nsdelegate" [ 5.050828] random: crng init done [ 5.054234] random: 7 urandom warning(s) missed due to ratelimiting [ 5.209356] using random self ethernet address [ 5.214107] using random host ethernet address [ 5.264814] using random self ethernet address [ 5.270223] using random host ethernet address [ 6.275828] overlay: module is already loaded [ 6.650646] CPU1: shutdown [ 6.709844] CPU2: shutdown [ 7.617686] vdd-1v8: voltage operation not allowed [ 7.617698] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.638177] vdd-1v8: voltage operation not allowed [ 7.638186] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.659911] vdd-1v8: voltage operation not allowed [ 7.659926] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.662339] vdd-1v8: voltage operation not allowed [ 7.662346] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.766114] vdd-1v8: voltage operation not allowed [ 7.766126] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.767039] vdd-1v8: voltage operation not allowed [ 7.767049] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.768580] vdd-1v8: voltage operation not allowed [ 7.768587] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) Ubuntu 18.04.2 LTS tegra-ubuntu ttyS2