jetson@jetson-desktop:~$ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.201-tegra (buildbrain@mobile-u64-5497-d7000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb1
[ 0.000000] Boot CPU: AArch64 Processor [411fd071]
[ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32,
[ 0.000000] OF: fdt: - 80000000 , 7ee00000
[ 0.000000] OF: fdt: - 100000000 , 7f200000
[ 0.000000] Found tegra_fbmem: 00800000@92ca9000
[ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options ‘’)
[ 0.000000] bootconsole [uart8250] enabled
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node ‘fb0_carveout’: base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node ‘fb0_carveout’: base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node ‘fb1_carveout’: base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node ‘fb1_carveout’: base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
[ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout
[ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
[ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000
[ 0.000000] On node 0 totalpages: 1039872
[ 0.000000] DMA zone: 8192 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 519168 pages, LIFO batch:31
[ 0.000000] Normal zone: 8136 pages used for memmap
[ 0.000000] Normal zone: 520704 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304
[ 0.000000] pcpu-alloc: s57560 r8192 d32552 u98304 alloc=24*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] CPU features: enabling workaround for ARM erratum 832075
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544
[ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 t
[ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes
[ 0.000000] log_buf_len min size: 32768 bytes
[ 0.000000] log_buf_len: 131072 bytes
[ 0.000000] early log buf free: 29364(89%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Memory: 3560368K/4159488K available (15294K kernel code, 2942K rwdata, 6664K rodata, 8576K init, 609K bss, 123984K reserved, 475136K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB)
[ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB)
[ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB)
[ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13f808 ( 2943 KB)
[ 0.000000] .bss : 0xffffff800a13f808 - 0xffffff800a1d7cbc ( 610 KB)
[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller
[ 0.000000] t210 clock and reset probe
[ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.010031] Console: colour dummy device 80x25
[ 0.014697] console [tty0] enabled
[ 0.018205] bootconsole [uart8250] disabled
[ 0.022525] kmemleak: Kernel memory leak detector disabled
[ 0.022553] Calibrating delay loop (skipped), value calculated using timer frequency… 38.40 BogoMIPS (lpj=76800)
[ 0.022575] pid_max: default: 32768 minimum: 301
[ 0.023042] Security Framework initialized
[ 0.023268] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.023284] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024498] ftrace: allocating 47208 entries in 185 pages
[ 0.195252] sched-energy: CPU device node has no sched-energy-costs
[ 0.195284] ASID allocator initialised with 65536 entries
[ 0.232875] tegra-id: chipid=22117.
[ 0.232907] tegra-id: opt_subrevision=0.
[ 0.232930] Tegra Speedo/IDDQ fuse revision 4
[ 0.232940] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2
[ 0.232950] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0
[ 0.232962] Tegra: CPU Speedo Value 2094, SoC Speedo Value 1966, GPU Speedo Value 2089
[ 0.232972] Tegra: CPU IDDQ Value 2108, SoC IDDQ Value 2172, GPU IDDQ Value 2765
[ 0.232997] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1
[ 0.233021] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/…/…/…/…/…/…/hardware/nvidia/platform/t210/porg/kernel-dts/ts
[ 0.233043] DTB Build time: Feb 19 2021 08:42:41
[ 0.281334] CPU1: Booted secondary processor [411fd071]
[ 0.313232] CPU2: Booted secondary processor [411fd071]
[ 0.345204] CPU3: Booted secondary processor [411fd071]
[ 0.345300] Brought up 4 CPUs
[ 0.345356] SMP: Total of 4 processors activated.
[ 0.345371] CPU features: detected feature: 32-bit EL0 Support
[ 0.345650] CPU: All CPU(s) started at EL2
[ 0.345681] alternatives: patching kernel code
[ 0.354193] devtmpfs: initialized
[ 0.393608] Initilizing CustomIPI irq domain
[ 0.394032] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.394078] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.405609] pinctrl core: initialized pinctrl subsystem
[ 0.406247] OS set in device tree is not L4T.
[ 0.406710] regulator-dummy: no parameters
[ 0.407003] Initializing plugin-manager
[ 0.407162] Plugin module not found
[ 0.407356] node /plugin-manager/fragement@0 match with board >=3448-0000-100
[ 0.407899] node /plugin-manager/fragment@1 match with board >=3448-0000-101
[ 0.408903] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt
[ 0.409154] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt
[ 0.409864] node /plugin-manager/fragement@10 match with board >=3448-0000-300
[ 0.411816] node /plugin-manager/fragement@13 match with board >=3448-0000-300
[ 0.415667] NET: Registered protocol family 16
[ 0.417006] pstore: using zlib compression
[ 0.417576] console [pstore-1] enabled
[ 0.417592] pstore: Registered ramoops as persistent store backend
[ 0.417610] ramoops: attached 0x200000@0xb0000000, ecc: 0/0
[ 0.433348] cpuidle: using governor menu
[ 0.436808] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
[ 0.438791] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000)
[ 0.438842] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.441902] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.444474] Serial: AMBA PL011 UART driver
[ 0.445095] tegra_powergate_init: DONE
[ 0.445126] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/…/…/…/…/…/…/hardware/nvidia/platform/t210/porg/kernel-dts/ts
[ 0.445161] DTB Build time: Feb 19 2021 08:42:41
[ 0.447292] Tegra reboot handler registered.
[ 0.452012] iommu: Adding device tegra-carveouts to group 0
[ 0.452189] platform tegra-carveouts: domain=ffffffc0f94613d8 allocates as[0]=ffffffc0f94580a8
[ 0.452600] iommu: Adding device smmu_test to group 1
[ 0.452666] platform smmu_test: domain=ffffffc0f9461618 allocates as[0]=ffffffc0f9458110
[ 0.453561] mc: mapped MMIO address: 0xffffff800802e000 → 0x70019000
[ 0.453638] mc: mapped MMIO address: 0xffffff8008065000 → 0x7001c000
[ 0.453707] mc: mapped MMIO address: 0xffffff8008079000 → 0x7001d000
[ 0.453728] nv-tegra-mc 70019000.mc: No mssnvlink node
[ 0.453765] mc-err: mcerr ops are set to t21x
[ 0.461623] iommu: Adding device 70090000.xusb to group 2
[ 0.461927] iommu: Adding device 70006000.serial to group 3
[ 0.462022] platform 70006000.serial: domain=ffffffc0f9b8a618 allocates as[0]=ffffffc0f9458178
[ 0.462473] iommu: Adding device 70006040.serial to group 4
[ 0.462756] iommu: Adding device 70006200.serial to group 5
[ 0.463001] iommu: Adding device sound to group 6
[ 0.463064] platform sound: domain=ffffffc0f9b8ab58 allocates as[0]=ffffffc0f94581e0
[ 0.463637] iommu: Adding device 7000d400.spi to group 7
[ 0.463904] iommu: Adding device 7000d600.spi to group 8
[ 0.464178] iommu: Adding device 70410000.spi to group 9
[ 0.464515] iommu: Adding device 50000000.host1x to group 10
[ 0.464805] iommu: Adding device 54080000.vi to group 11
[ 0.465195] iommu: Adding device 54600000.isp to group 12
[ 0.465698] iommu: Adding device 54680000.isp to group 13
[ 0.466032] iommu: Adding device tegradc.0 to group 14
[ 0.466105] platform tegradc.0: domain=ffffffc0f94e2a98 allocates as[0]=ffffffc0f9458248
[ 0.470312] platform tegradc.0: IOVA linear map 0x0000000092ca9000(800000)
[ 0.470721] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000)
[ 0.471082] iommu: Adding device tegradc.1 to group 15
[ 0.471147] platform tegradc.1: domain=ffffffc0f94e2cd8 allocates as[0]=ffffffc0f94582b0
[ 0.475328] platform tegradc.1: IOVA linear map 0x0000000092ca9000(800000)
[ 0.475733] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000)
[ 0.476005] iommu: Adding device 54340000.vic to group 16
[ 0.476224] iommu: Adding device 544c0000.nvenc to group 17
[ 0.476448] iommu: Adding device 54500000.tsec to group 18
[ 0.476661] iommu: Adding device 54100000.tsecb to group 19
[ 0.476865] iommu: Adding device 54480000.nvdec to group 20
[ 0.477097] iommu: Adding device 54380000.nvjpg to group 21
[ 0.478207] iommu: Adding device 546c0000.i2c to group 22
[ 0.478560] iommu: Adding device 57000000.gpu to group 23
[ 0.478627] platform 57000000.gpu: domain=ffffffc0f94f1cd8 allocates as[0]=ffffffc0f9458318
[ 0.478683] platform 57000000.gpu: domain=ffffffc0f94f1cd8 allocates as[1]=ffffffc0f9458380
[ 0.478745] platform 57000000.gpu: domain=ffffffc0f94f1cd8 allocates as[2]=ffffffc0f94583e8
[ 0.478803] platform 57000000.gpu: domain=ffffffc0f94f1cd8 allocates as[3]=ffffffc0f9458450
[ 0.479725] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
[ 0.479765] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present
[ 0.479793] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET
[ 0.479812] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM
[ 0.479828] tegra-pmc: ### PMC reset status reg: 0x0
[ 0.529417] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
[ 0.529447] tegra-pmc: Clear bootloader IO dpd settings
[ 0.529482] tegra-pmc 7000e400.pmc: IO padctrl driver initialized
[ 0.529565] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands
[ 0.529880] iommu: Adding device 70012000.se to group 24
[ 0.530678] iommu: Adding device 7000c000.i2c to group 25
[ 0.530944] iommu: Adding device 7000c400.i2c to group 26
[ 0.531227] iommu: Adding device 7000c500.i2c to group 27
[ 0.531489] iommu: Adding device 7000c700.i2c to group 28
[ 0.531789] iommu: Adding device 7000d000.i2c to group 29
[ 0.532057] iommu: Adding device 7000d100.i2c to group 30
[ 0.532363] iommu: Adding device sdhci-tegra.0 to group 31
[ 0.532440] platform sdhci-tegra.0: domain=ffffffc0f9587e58 allocates as[0]=ffffffc0f94584b8
[ 0.533335] iommu: Adding device 700d0000.xudc to group 32
[ 0.536565] vdd-ac-bat: 5000 mV
[ 0.536941] vdd-5v0-sys: 5000 mV
[ 0.537944] vdd-5v0-hdmi: supplied by vdd-5v0-sys
[ 0.538033] vdd-5v0-hdmi: 5000 mV
[ 0.538451] vdd-1v8-sys: 1800 mV
[ 0.538850] vdd-fan: supplied by vdd-5v0-sys
[ 0.538900] vdd-fan: 5000 mV
[ 0.539285] vdd-usb-vbus: supplied by vdd-5v0-sys
[ 0.539358] vdd-usb-vbus: 5000 mV
[ 0.539889] vdd-usb-vbus2: 5000 mV
[ 0.574423] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.577021] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip
[ 0.578437] GPIO line 151 (camera-control-output-low) hogged as output/low
[ 0.578476] GPIO line 152 (camera-control-output-low) hogged as output/low
[ 0.578523] GPIO line 6 (system-suspend-gpio) hogged as output/high
[ 0.578886] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio)
[ 0.586836] eventlib_kernel: keventlib is initialized, test id: 0
[ 0.587225] SCSI subsystem initialized
[ 0.587469] libata version 3.00 loaded.
[ 0.587707] usbcore: registered new interface driver usbfs
[ 0.587784] usbcore: registered new interface driver hub
[ 0.587881] usbcore: registered new device driver usb
[ 0.591918] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8
[ 0.594096] random: fast init done
[ 0.597456] vdd-core: 600 <–> 1162 mV at 1075 mV
[ 0.598549] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV
[ 0.601351] vdd-ddr-1v1: 1150 mV
[ 0.605352] vdd-pre-reg-1v35: 1350 mV
[ 0.609349] vdd-1v8: 1800 mV
[ 0.613349] avdd-sys-1v2: 1200 mV
[ 0.617349] vdd-pex-1v0: 1050 mV
[ 0.618024] vddio-sdmmc-ap: 1800 <–> 3300 mV at 3300 mV
[ 0.618582] max77620-ldo3: at 3100 mV
[ 0.621349] vdd-rtc: 850 <–> 1100 mV at 1000 mV
[ 0.621907] max77620-ldo5: at 3100 mV
[ 0.625349] vddio-sdmmc3-ap: 1800 <–> 3300 mV at 2800 mV
[ 0.629348] avdd-1v05-pll: 1050 mV
[ 0.633347] avdd-io-hdmi-dp: 1050 mV
[ 0.635966] GPIO line 505 (spmic-default-output-high) hogged as output/high
[ 0.636266] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio)
[ 0.636569] max77620 4-003c: max77620 probe successful
[ 0.639306] media: Linux media interface: v0.10
[ 0.639385] Linux video capture interface: v2.00
[ 0.640315] pps_core: LinuxPPS API ver. 1 registered
[ 0.640339] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.640381] PTP clock support registered
[ 0.643649] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table
[ 0.644541] Advanced Linux Sound Architecture Driver Initialized.
[ 0.645276] Bluetooth: Core ver 2.22
[ 0.645356] NET: Registered protocol family 31
[ 0.645372] Bluetooth: HCI device and connection manager initialized
[ 0.645398] Bluetooth: HCI socket layer initialized
[ 0.645425] Bluetooth: L2CAP socket layer initialized
[ 0.645464] Bluetooth: SCO socket layer initialized
[ 0.647233] tegra210_dvfs: no clock found for sdmmc2_ddr
[ 0.647270] tegra210_dvfs: no clock found for sdmmc4_ddr
[ 0.647331] tegra210_dvfs: no clock found for sdmmc1_ddr
[ 0.647358] tegra210_dvfs: no clock found for sdmmc3_ddr
[ 0.651318] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe
[ 0.652557] vdd-3v3-sys: supplied by vdd-5v0-sys
[ 0.652671] vdd-3v3-sys: 3300 mV
[ 0.652980] vdd-1v8-sys: supplied by vdd-3v3-sys
[ 0.657460] vdd-usb-vbus2: supplied by vdd-3v3-sys
[ 0.658018] vdd-3v3-sd: supplied by vdd-3v3-sys
[ 0.658079] vdd-3v3-sd: 3300 mV
[ 0.659208] avdd-io-edp-1v05: supplied by avdd-1v05-pll
[ 0.659267] avdd-io-edp-1v05: 1050 mV
[ 0.659713] vdd-usb-hub-en: supplied by vdd-1v8-sys
[ 0.659792] vdd-usb-hub-en: 5000 mV
[ 0.661185] camchar: rtcpu character device driver loaded
[ 0.662115] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0
[ 0.663505] clocksource: Switched to clocksource arch_sys_counter
[ 0.705052] VFS: Disk quotas dquot_6.6.0
[ 0.705229] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.705739] nvmap_heap_init: nvmap_heap_init: created heap block cache
[ 0.706187] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000
[ 0.706233] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000)
[ 0.706447] cma: enabled page replacement for spfn=d7000, epfn=f0000
[ 0.706467] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
[ 0.706495] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
[ 0.706539] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048
[ 0.706564] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout
[ 0.706595] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways
[ 0.706617] nvmap_page_pool_init: Total RAM pages: 1008876
[ 0.706634] nvmap_page_pool_init: nvmap page pool size: 126109 pages (492 MB)
[ 0.706733] nvmap_background_zero_thread: PP zeroing thread starting.
[ 0.707225] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
[ 0.708231] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB)
[ 0.718273] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
[ 0.718779] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
[ 0.719195] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
[ 0.719540] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
[ 0.719763] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
[ 0.720077] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
[ 0.720098] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB
[ 0.720553] NET: Registered protocol family 2
[ 0.721545] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.721778] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.722324] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.722505] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.722604] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.723048] NET: Registered protocol family 1
[ 0.723917] RPC: Registered named UNIX socket transport module.
[ 0.723946] RPC: Registered udp transport module.
[ 0.723961] RPC: Registered tcp transport module.
[ 0.723977] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.724002] PCI: CLS 0 bytes, default 64
[ 0.724242] Trying to unpack rootfs image as initramfs…
[ 1.029462] Freeing initrd memory: 6988K
[ 1.039463] host1x 50000000.host1x: initialized
[ 1.041273] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.044635] audit: initializing netlink subsys (disabled)
[ 1.044756] audit: type=2000 audit(0.887:1): initialized
[ 1.045542] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 1.055234] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.056807] ntfs: driver 2.1.32 [Flags: R/W].
[ 1.057614] 9p: Installing v9fs 9p2000 file system support
[ 1.061027] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
[ 1.061206] io scheduler noop registered
[ 1.061517] io scheduler cfq registered (default)
[ 1.064776] gic 702f9000.agic: GIC IRQ controller registered
[ 1.067812] iommu: Adding device 702ef000.adsp to group 33
[ 1.076618] iommu: Adding device aconnect@702c0000:adsp_audio to group 34
[ 1.076783] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered
[ 1.077394] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x8208c11
[ 1.077424] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4
[ 1.079106] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb
[ 1.079246] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb
[ 1.079360] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb
[ 1.079625] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1
[ 1.079745] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4
[ 1.079866] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4
[ 1.079977] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4
[ 1.080091] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4
[ 1.080205] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb
[ 1.080318] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb
[ 1.086503] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops
[ 1.088446] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000
[ 1.090453] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration
[ 1.091891] tegra-pcie 1003000.pcie: PCIE: Enable power rails
[ 1.092261] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes
[ 1.093477] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
[ 1.093746] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000
[ 1.094032] Adding domain tsec-pd to PM domain host1x-pd
[ 1.096529] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
[ 1.097531] tsec 54500000.tsec: initialized
[ 1.099127] tsec 54100000.tsecb: initialized
[ 1.099883] Adding domain nvdec-pd to PM domain host1x-pd
[ 1.103573] nvdec 54480000.nvdec: initialized
[ 1.104665] Adding domain vic03-pd to PM domain host1x-pd
[ 1.104863] Adding domain msenc-pd to PM domain host1x-pd
[ 1.105044] Adding domain nvjpg-pd to PM domain host1x-pd
[ 1.109480] falcon 54340000.vic: initialized
[ 1.110750] falcon 544c0000.nvenc: initialized
[ 1.112117] falcon 54380000.nvjpg: initialized
[ 1.116743] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97
[ 1.116816] tegra_cec 70015000.tegra_cec: Enable clock result: 0.
[ 1.116867] tegra_cec 70015000.tegra_cec: tegra_cec_init started
[ 1.116918] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1
[ 1.117036] display board info: id 0x0, fab 0x0
[ 1.117110] generic_infoframe_type: 0x87
[ 1.117155] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0
[ 1.117177] tegra_cec 70015000.tegra_cec: probed
[ 1.117276] tegradc tegradc.0: DT parsed successfully
[ 1.117338] tegradc tegradc.0: Display dc.ffffff800ab80000 registered with id=0
[ 1.117912] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781
[ 1.124928] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
[ 1.126241] tegradc tegradc.0: probed
[ 1.131481] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels
[ 1.133085] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled
[ 1.133131] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized
[ 1.133689] kfuse 7000fc00.kfuse: initialized
[ 1.135736] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available
[ 1.136854] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
[ 1.139167] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
[ 1.139225] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 1.139250] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
[ 1.139280] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
[ 1.139309] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.139410] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400
[ 1.139647] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.140025] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400
[ 1.140128] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.140618] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now
[ 1.140675] vdd-cpu: 708 <–> 1322 mV at 708 mV
[ 1.140731] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.140769] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.141227] pci 0000:01:00.0: [8086:24fd] type 00 class 0x028000
[ 1.141282] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed
[ 1.141289] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 1.141573] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.143052] vdd-gpu: applied init 1000000uV constraint
[ 1.143086] vdd-gpu: 708 <–> 1323 mV at 997 mV
[ 1.144179] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed
[ 1.149024] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.149219] No Device Node present for smmu client: serial8250 !!
[ 1.149253] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
[ 1.149344] iommu: Adding device serial8250 to group 35
[ 1.151762] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.152111] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 1.152156] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 1.152198] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
[ 1.152225] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[ 1.152494] pci 0000:02:00.0: supports D1 D2
[ 1.152499] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.153097] console [ttyS0] disabled
[ 1.153193] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra
[ 1.163615] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 1.163698] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x130fffff]
[ 1.163704] pci 0000:00:02.0: BAR 14: assigned [mem 0x13100000-0x131fffff]
[ 1.163709] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.163721] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
[ 1.163747] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.163755] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff]
[ 1.163767] pci 0000:02:00.0: BAR 4: assigned [mem 0x13100000-0x13103fff 64bit]
[ 1.163787] pci 0000:02:00.0: BAR 2: assigned [mem 0x13104000-0x13104fff 64bit]
[ 1.163805] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[ 1.163813] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 1.163817] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 1.163823] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff]
[ 1.164336] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 1.164340] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.164347] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
[ 1.164485] aer 0000:00:01.0:pcie002: service driver aer loaded
[ 1.164697] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.164703] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.164709] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
[ 1.164804] aer 0000:00:02.0:pcie002: service driver aer loaded
[ 2.139539] tegra_cec 70015000.tegra_cec: Can’t find physical addresse.
[ 2.139543] tegra_cec 70015000.tegra_cec: tegra_cec_init Done.
[ 3.641625] console [ttyS0] enabled
[ 3.642220] Console: switching to colour frame buffer device 240x67
[ 3.643060] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART
[ 3.643387] serial-tegra 70006200.serial: RX in PIO mode
[ 3.643484] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART
[ 3.644619] [drm] Initialized
[ 3.665655] brd: module loaded
[ 3.676882] loop: module loaded
[ 3.676983] tegra_profiler: version: 1.143, samples/io: 48/28
[ 3.677102] tegra_profiler: auth: init
[ 3.678597] THERMAL EST: found 2 subdevs
[ 3.678605] THERMAL EST num_resources: 0
[ 3.678611] [THERMAL EST subdev 0]
[ 3.678617] [THERMAL EST subdev 1]
[ 3.679096] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est
[ 3.679099] THERMAL EST: thz register success.
[ 3.679296] THERMAL EST: end of probe, return err: 0
[ 3.680588] sd: No Scsi addr parsed to reserve index
[ 3.680625] hisi_sas: driver version v1.6
[ 3.685462] tegra-qspi 70410000.spi: Prod settings list not found
[ 3.686915] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes)
[ 3.686922] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0
[ 3.698017] libphy: Fixed MDIO Bus: probed
[ 3.698724] tun: Universal TUN/TAP device driver, 1.6
[ 3.698727] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 3.700643] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 3.700649] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.700728] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 3.700730] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.700817] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 3.700821] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 3.700888] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
[ 3.700891] Copyright(c) 1999 - 2017 Intel Corporation.
[ 3.706816] r8168 0000:02:00.0: enabling device (0000 → 0003)
[ 3.706847] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
[ 3.721466] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node
[ 3.721611] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:ea:e1:cc from device tree
[ 3.722227] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 3.722290] r8168 Copyright (C) 2017 Realtek NIC software team nicfae@realtek.com
This program comes with ABSOLUTELY NO WARRANTY; for details, please see http://www.gnu.org/licenses/.
This is free software, and you are welcome to redistribute it under certain conditions; see http://www.gnu.org/licenses/.
[ 3.722921] PPP generic driver version 2.4.2
[ 3.723151] PPP BSD Compression module registered
[ 3.723155] PPP Deflate Compression module registered
[ 3.723197] PPP MPPE Compression module registered
[ 3.723204] NET: Registered protocol family 24
[ 3.723276] usbcore: registered new interface driver r8152
[ 3.723324] usbcore: registered new interface driver asix
[ 3.723381] usbcore: registered new interface driver ax88179_178a
[ 3.723418] usbcore: registered new interface driver cdc_ether
[ 3.723461] usbcore: registered new interface driver net1080
[ 3.723532] usbcore: registered new interface driver cdc_subset
[ 3.723568] usbcore: registered new interface driver zaurus
[ 3.723623] usbcore: registered new interface driver cdc_ncm
[ 3.723819] VFIO - User Level meta-driver version: 0.3
[ 3.725141] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 3.725169] ehci-pci: EHCI PCI platform driver
[ 3.725216] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 3.725228] ohci-pci: OHCI PCI platform driver
[ 3.725280] ohci-platform: OHCI generic platform driver
[ 3.728079] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP
[ 3.728706] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0
[ 3.729909] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f90d4c00 id
[ 3.732238] usbcore: registered new interface driver uas
[ 3.732303] usbcore: registered new interface driver usb-storage
[ 3.732424] usbcore: registered new interface driver usbserial
[ 3.732804] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release
[ 3.732862] tegra-xusb 70090000.xusb: xHCI Host Controller
[ 3.732889] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1
[ 3.733652] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010
[ 3.733716] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000
[ 3.733925] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.733931] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.733937] usb usb1: Product: xHCI Host Controller
[ 3.733941] usb usb1: Manufacturer: Linux 4.9.201-tegra xhci-hcd
[ 3.733944] usb usb1: SerialNumber: 70090000.xusb
[ 3.734600] hub 1-0:1.0: USB hub found
[ 3.734637] hub 1-0:1.0: 5 ports detected
[ 3.735254] tegra-xusb 70090000.xusb: xHCI Host Controller
[ 3.735263] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2
[ 3.735340] usb usb2: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 3.735562] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.735568] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.735571] usb usb2: Product: xHCI Host Controller
[ 3.735575] usb usb2: Manufacturer: Linux 4.9.201-tegra xhci-hcd
[ 3.735578] usb usb2: SerialNumber: 70090000.xusb
[ 3.736180] hub 2-0:1.0: USB hub found
[ 3.736217] hub 2-0:1.0: 4 ports detected
[ 3.737253] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0
[ 3.737258] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0
[ 3.738906] tegra-xudc-new 700d0000.xudc: device count: 1
[ 3.740956] tegra-xudc-new 700d0000.xudc: USB charger detection disabled
[ 3.740971] tegra-xudc-new 700d0000.xudc: vbus state: 0
[ 3.741011] tegra-xudc-new 700d0000.xudc: entering ELPG
[ 3.741281] tegra-xudc-new 700d0000.xudc: entering ELPG done
[ 3.741986] mousedev: PS/2 mouse device common for all mice
[ 3.742108] usbcore: registered new interface driver xpad
[ 3.835602] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1
[ 3.835671] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2
[ 3.843746] usb usb2: usb_suspend_both: status 0
[ 3.868476] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
[ 3.871053] rtc rtc1: alarm rtc device
[ 3.871074] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
[ 3.871105] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
[ 3.871751] i2c /dev entries driver
[ 3.873874] i2c i2c-6: Added multiplexed i2c bus 7
[ 3.874363] i2c i2c-6: Added multiplexed i2c bus 8
[ 3.874369] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter
[ 3.875221] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6
[ 3.900325] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6
[ 3.925989] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
[ 3.928605] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
[ 3.928610] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4
[ 3.929073] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 3.929091] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC
[ 3.929101] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC
[ 3.929246] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 3.929256] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC
[ 3.929262] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC
[ 3.929417] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 3.929428] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC
[ 3.929433] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature
[ 3.929620] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19
[ 3.930428] tegra_aotag tegra-aotag: Registering sensor 0
[ 3.930486] tegra_aotag tegra-aotag: Invalid temp readout
[ 3.930513] tegra_aotag tegra-aotag: Invalid temp readout
[ 3.930530] tegra_aotag tegra-aotag: Bound to TZ : ID 0
[ 3.930538] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
[ 3.931556] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 3.931577] tegra_dfll_action dfll-cdev-cap: Tegra DFLL ‘cap cooling device’ registered
[ 3.931836] tegra_aotag tegra-aotag: Invalid temp readout
[ 3.931867] tegra_dfll_action dfll-cdev-floor: Tegra DFLL ‘floor cooling device’ registered
[ 3.932285] parse_throttle_dt_data: Num cap clks = 6
[ 3.932291] parse_throttle_dt_data: clk=cclk_g type=2
[ 3.932305] parse_throttle_dt_data: clk=gpu type=4
[ 3.932333] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
[ 3.932353] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
[ 3.932375] parse_throttle_dt_data: clk=cap.throttle.sclk type=0
[ 3.932378] parse_throttle_dt_data: clk=emc type=3
[ 3.932817] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 3.932931] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 3.933071] tegra_throttle_probe: probe successful. #cdevs=4
[ 3.933871] FAN dev name: pwm-fan
[ 3.933950] FAN:gpio request success.
[ 3.934030] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
[ 3.934360] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
[ 3.934582] pwm_fan_driver pwm-fan: fan tach request irq success
[ 3.934592] pwm_fan_driver pwm-fan: tach period: 1000
[ 3.934703] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
[ 3.934708] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
[ 3.934713] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
[ 3.934717] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
[ 3.934721] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
[ 3.934725] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
[ 3.934728] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
[ 3.934732] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
[ 3.934736] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
[ 3.934740] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
[ 3.937646] device-mapper: uevent: version 1.0.3
[ 3.938118] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 3.944036] tegra210-cpufreq cpufreq: probe()…completed
[ 3.944820] sdhci: Secure Digital Host Controller Interface driver
[ 3.944821] sdhci: Copyright(c) Pierre Ossman
[ 3.944822] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.945319] sdhci-tegra sdhci-tegra.0: Got CD GPIO
[ 3.945678] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful
[ 3.945803] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300
[ 3.950328] tegra-se 70012000.se: tegra_se_probe: complete
[ 3.950860] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.952126] usbcore: registered new interface driver usbhid
[ 3.952127] usbhid: USB HID core driver
[ 3.954185] tegra21x_actmon 6000c800.actmon: in actmon_register()…
[ 3.954353] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all
[ 3.956221] nvpmodel: initialized successfully
[ 3.957339] usbcore: registered new interface driver snd-usb-audio
[ 3.957395] No Device Node present for smmu client: snd-soc-dummy !!
[ 3.957399] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
[ 3.957419] iommu: Adding device snd-soc-dummy to group 36
[ 3.965647] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0
[ 3.980279] OPE platform probe
[ 3.980366] OPE platform probe successful
[ 3.980639] OPE platform probe
[ 3.980719] OPE platform probe successful
[ 3.999752] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr
[ 4.004737] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok
[ 4.004866] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok
[ 4.004989] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok
[ 4.005110] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok
[ 4.005230] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok
[ 4.005353] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok
[ 4.005475] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok
[ 4.005598] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok
[ 4.005726] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok
[ 4.005846] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok
[ 4.017450] u32 classifier
[ 4.017451] Actions configured
[ 4.017526] Initializing XFRM netlink socket
[ 4.018232] NET: Registered protocol family 10
[ 4.018979] NET: Registered protocol family 17
[ 4.018990] NET: Registered protocol family 15
[ 4.019064] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 4.019108] Bluetooth: RFCOMM socket layer initialized
[ 4.019117] Bluetooth: RFCOMM ver 1.11
[ 4.019122] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.019126] Bluetooth: HIDP socket layer initialized
[ 4.019144] 9pnet: Installing 9P2000 support
[ 4.019178] Key type dns_resolver registered
[ 4.021055] Registered cp15_barrier emulation handler
[ 4.021064] Registered setend emulation handler
[ 4.022105] registered taskstats version 1
[ 4.022733] Adding domain ve2-pd to PM domain host1x-pd
[ 4.022970] Adding domain ve-pd to PM domain host1x-pd
[ 4.063512] usb 1-2: new high-speed USB device number 2 using tegra-xusb
[ 4.088737] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411
[ 4.088741] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.088744] usb 1-2: Product: 4-Port USB 2.1 Hub
[ 4.088746] usb 1-2: Manufacturer: Generic
[ 4.089656] hub 1-2:1.0: USB hub found
[ 4.090228] hub 1-2:1.0: 4 ports detected
[ 4.203888] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb
[ 4.210094] mmc0: Applying tuning correction
[ 4.210106] mmc0: Tap value after applying correction 57
[ 4.210123] mmc0: hw tuning done …
[ 4.210153] mmc0: new ultra high speed SDR104 SDHC card at address e624
[ 4.210430] mmcblk0: mmc0:e624 SD32G 29.7 GiB
[ 4.215458] mmcblk0: p1
[ 4.240381] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411
[ 4.240385] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.240387] usb 2-1: Product: 4-Port USB 3.1 Hub
[ 4.240389] usb 2-1: Manufacturer: Generic
[ 4.244034] hub 2-1:1.0: USB hub found
[ 4.244806] hub 2-1:1.0: 4 ports detected
[ 4.355500] usb 1-3: new full-speed USB device number 3 using tegra-xusb
[ 4.381357] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b
[ 4.381361] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.399514] usb 2-1: usb_suspend_both: status 0
[ 4.399657] usb usb2: usb_suspend_both: status 0
[ 4.463507] usb 1-2.1: new full-speed USB device number 4 using tegra-xusb
[ 4.487053] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c534
[ 4.487057] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.487060] usb 1-2.1: Product: USB Receiver
[ 4.487062] usb 1-2.1: Manufacturer: Logitech
[ 4.489806] input: Logitech USB Receiver as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C534.0001/input/input1
[ 4.547979] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-70090000.xusb-2.1/input0
[ 4.551035] input: Logitech USB Receiver as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.1/0003:046D:C534.0002/input/input2
[ 4.607785] hid-generic 0003:046D:C534.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-70090000.xusb-2.1/input1
[ 4.687508] usb 1-2.3: new low-speed USB device number 5 using tegra-xusb
[ 4.713562] usb 1-2.3: New USB device found, idVendor=1c4f, idProduct=0002
[ 4.713566] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.713569] usb 1-2.3: Product: USB Keyboard
[ 4.713571] usb 1-2.3: Manufacturer: SIGMACHIP
[ 4.717112] input: SIGMACHIP USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.3/1-2.3:1.0/0003:1C4F:0002.0003/input/input3
[ 4.779812] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-70090000.xusb-2.3/input0
[ 4.782490] input: SIGMACHIP USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.3/1-2.3:1.1/0003:1C4F:0002.0004/input/input4
[ 4.843764] hid-generic 0003:1C4F:0002.0004: input,hidraw3: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-70090000.xusb-2.3/input1
[ 5.220360] tegradc tegradc.0: fb registered
[ 5.229414] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode.
[ 5.236654] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m
[ 5.245064] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL.
[ 5.252205] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL.
[ 5.285080] extcon-disp-state extcon:disp-state: cable 47 state 1
[ 5.291223] Extcon AUX1(HDMI) enable
[ 5.295244] tegradc tegradc.1: disp1 connected to head1->/host1x/sor
[ 5.301637] tegradc tegradc.1: No lt-data, using default setting
[ 5.333416] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244
[ 5.343801] tegradc tegradc.1: No hpd-gpio in DT
[ 5.348439] tegradc tegradc.1: DT parsed successfully
[ 5.353520] tegradc tegradc.1: Display dc.ffffff800d540000 registered with id=1
[ 5.361644] tegradc tegradc.1: dpd enable lookup fail:-19
[ 5.370999] tegradc tegradc.1: probed
[ 5.374873] tegradc tegradc.1: fb registered
[ 5.382260] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
[ 5.389398] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
[ 5.390505] isp 54600000.isp: initialized
[ 5.391226] isp 54680000.isp: initialized
[ 5.401466] last reset is due to power on reset
[ 5.401469] KERNEL: PMC reset status reg: 0x0
[ 5.401528] BL: PMC reset status reg: 0x0
[ 5.401530] BL: PMIC poweroff Event Recorder: 0xc4
[ 5.403147] clk_cbus_recalc_rate: no gbus parent
[ 5.403151] clk_cbus_round_rate: no gbus parent
[ 5.403153] clk_cbus_round_rate: no gbus parent
[ 5.403159] clk_cbus_recalc_rate: no gbus parent
[ 5.403261] clk_cbus_recalc_rate: no gbus parent
[ 5.403264] clk_cbus_round_rate: no gbus parent
[ 5.403265] clk_cbus_round_rate: no gbus parent
[ 5.403268] clk_cbus_recalc_rate: no gbus parent
[ 5.403281] tegra_dvfs: GPU-cap: registered
[ 5.403351] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled
[ 5.403353] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled
[ 5.403355] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled
[ 5.405082] tegra_dvfs: vdd-gpu-vts: registered
[ 5.405782] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS ‘floor cooling device’ registered
[ 5.406384] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS ‘cap cooling device’ registered
[ 5.406861] input: gpio-keys as /devices/gpio-keys/input/input5
[ 5.436686] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419)
[ 5.437748] vi 54080000.vi: vi_probe: ++
[ 5.440524] vi 54080000.vi: initialized
[ 5.442564] vi 54080000.vi: subdev nvcsi–2 bound
[ 5.442578] vi 54080000.vi: subdev imx219 7-0010 bound
[ 5.443361] vi 54080000.vi: subdev nvcsi–1 bound
[ 5.443367] vi 54080000.vi: subdev imx219 8-0010 bound
[ 5.444354] mmcblk mmc0:e624: Card claimed for testing.
[ 5.444966] Disable partitions left on by BL
[ 5.444968] disb
[ 5.445009] bwmgr: missing cdev-type property
[ 5.445133] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 5.445139] DRAM derating cdev registered.
[ 5.446090] ALSA device list:
[ 5.446093] #0: tegra-hda at 0x70038000 irq 83
[ 5.446094] #1: tegra-snd-t210ref-mobile-rt565x
[ 5.596121] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
[ 5.596147] tegradc tegradc.0: blank - powerdown
[ 5.636365] extcon-disp-state extcon:disp-state: cable 47 state 0
[ 5.636366] Extcon AUX1(HDMI) disable
[ 5.683681] tegradc tegradc.0: unblank
[ 5.693981] tegradc tegradc.0: nominal-pclk:296730000 parent:296728125 div:1.0 pclk:296728125 293762700~323435700
[ 5.694030] tegradc tegradc.0: hdmi: tmds rate:296730K prod-setting:prod_c_hdmi_150m_300m
[ 5.695029] tegradc tegradc.0: hdmi: get YCC quant from EDID.
[ 5.729787] extcon-disp-state extcon:disp-state: cable 47 state 1
[ 5.729789] Extcon AUX1(HDMI) enable
[ 5.736739] tegradc tegradc.0: sync windows ret = 248
[ 5.825593] tegradc tegradc.1: blank - powerdown
[ 5.830252] extcon-disp-state extcon:disp-state: cable 44 state 0 already set.
[ 5.830256] Extcon DP: HPD disabled
[ 5.830258] hpd: hpd_switch 0
[ 5.830261] hpd: switching from state 0 (Reset) to state 1 (Check Plug)
[ 5.830268] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
[ 5.830272] hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
[ 5.863674] extcon-disp-state extcon:disp-state: cable 51 state 1
[ 5.863676] Extcon HDMI: HPD enabled
[ 5.863687] tegradc tegradc.0: hdmi: plugged
[ 5.880772] Freeing unused kernel memory: 8576K
[ 5.909867] Root device found: mmcblk0p1
[ 5.915329] Found dev node: /dev/mmcblk0p1
[ 6.289314] EXT4-fs (mmcblk0p1): 8 orphan inodes deleted
[ 6.297451] EXT4-fs (mmcblk0p1): recovery complete
[ 6.333483] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.346363] Rootfs mounted over mmcblk0p1
[ 6.372178] Switching from initrd to actual rootfs
[ 6.600563] systemd[1]: System time before build time, advancing clock.
[ 6.665454] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.686602] cgroup: cgroup2: unknown option “nsdelegate”
[ 6.733278] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +L)
[ 6.758481] systemd[1]: Detected architecture arm64.
[ 6.815216] systemd[1]: Set hostname to .
[ 6.980343] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support .
[ 7.000541] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 7.264768] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.276036] systemd[1]: Created slice System Slice.
[ 7.287480] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.297412] systemd[1]: Listening on udev Control Socket.
[ 7.309220] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.319088] systemd[1]: Listening on Syslog Socket.
[ 7.330425] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.342774] systemd[1]: Listening on udev Kernel Socket.
[ 7.481646] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[ 7.592542] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1)
[ 7.620036] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 7.635753] cpu-throttle-alert cooling device registered.
[ 7.635973] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 7.635989] gpu-throttle-alert cooling device registered.
[ 7.636176] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 7.636188] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 7.636202] hot-surface-alert cooling device registered.
[ 8.187057] systemd-journald[1996]: Received request to flush runtime journal from PID 1
[ 8.905254] Intel(R) Wireless WiFi driver for Linux
[ 8.905258] Copyright(c) 2003- 2015 Intel Corporation
[ 8.905483] iwlwifi 0000:01:00.0: enabling device (0000 → 0002)
[ 8.923151] using random self ethernet address
[ 8.932145] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2
[ 8.932149] iwlwifi 0000:01:00.0: Falling back to user helper
[ 8.953978] using random host ethernet address
[ 9.090024] random: crng init done
[ 9.095556] random: 7 urandom warning(s) missed due to ratelimiting
[ 9.632095] usbcore: registered new interface driver btusb
[ 9.634280] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[ 9.635287] Bluetooth: hci0: Device revision is 16
[ 9.635291] Bluetooth: hci0: Secure boot is enabled
[ 9.635294] Bluetooth: hci0: OTP lock is disabled
[ 9.635297] Bluetooth: hci0: API lock is enabled
[ 9.635299] Bluetooth: hci0: Debug lock is disabled
[ 9.635302] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 9.674541] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[ 10.122354] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2
[ 10.122357] iwlwifi 0000:01:00.0: Falling back to user helper
[ 10.452067] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2
[ 10.452070] iwlwifi 0000:01:00.0: Falling back to user helper
[ 10.501635] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2
[ 10.501638] iwlwifi 0000:01:00.0: Falling back to user helper
[ 10.569388] iwlwifi 0000:01:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
[ 10.657658] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[ 10.659846] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 10.660915] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 10.711466] Mass Storage Function, version: 2009/09/11
[ 10.711472] LUN: removable file: (no medium)
[ 10.723950] using random self ethernet address
[ 10.731254] using random host ethernet address
[ 10.783440] ieee80211 phy0: Selected rate control algorithm ‘iwl-mvm-rs’
[ 10.784300] thermal thermal_zone6: failed to read out thermal zone (-5)
[ 10.795806] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type iwlwifi
[ 10.809197] rndis0: HOST MAC 72:64:99:a6:96:54
[ 10.809269] rndis0: MAC 72:64:99:a6:96:55
[ 10.818631] usb0: HOST MAC 72:64:99:a6:96:56
[ 10.819233] usb0: MAC 72:64:99:a6:96:57
[ 10.819256] tegra-xudc-new 700d0000.xudc: exiting ELPG
[ 10.820003] tegra-xudc-new 700d0000.xudc: exiting ELPG done
[ 10.820022] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled
[ 10.820053] tegra-xudc-new 700d0000.xudc: entering ELPG
[ 10.820881] tegra-xudc-new 700d0000.xudc: entering ELPG done
[ 10.820905] tegra-xudc-new 700d0000.xudc: exiting ELPG
[ 10.821451] tegra-xudc-new 700d0000.xudc: exiting ELPG done
[ 10.821462] tegra-xudc-new 700d0000.xudc: entering ELPG
[ 10.821676] tegra-xudc-new 700d0000.xudc: entering ELPG done
[ 10.825860] l4tbr0: port 1(rndis0) entered blocking state
[ 10.825865] l4tbr0: port 1(rndis0) entered disabled state
[ 10.826031] device rndis0 entered promiscuous mode
[ 10.889642] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
[ 10.912851] l4tbr0: port 2(usb0) entered blocking state
[ 10.912856] l4tbr0: port 2(usb0) entered disabled state
[ 10.913021] device usb0 entered promiscuous mode
[ 10.919622] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 11.156259] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.156270] Bluetooth: BNEP socket layer initialized
[ 11.312138] Bluetooth: hci0: Waiting for firmware download to complete
[ 11.312251] Bluetooth: hci0: Firmware loaded in 1640877 usecs
[ 11.312599] Bluetooth: hci0: Waiting for device to boot
[ 11.325257] Bluetooth: hci0: Device booted in 12406 usecs
[ 11.332127] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[ 11.335294] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 15.056075] zram: Added device: zram0
[ 15.057779] zram: Added device: zram1
[ 15.059616] zram: Added device: zram2
[ 15.060829] zram: Added device: zram3
[ 15.077253] zram0: detected capacity change from 0 to 518537216
[ 15.373454] Adding 506380k swap on /dev/zram0. Priority:5 extents:1 across:506380k SS
[ 15.377566] zram1: detected capacity change from 0 to 518537216
[ 15.389109] Adding 506380k swap on /dev/zram1. Priority:5 extents:1 across:506380k SS
[ 15.393260] zram2: detected capacity change from 0 to 518537216
[ 15.404373] Adding 506380k swap on /dev/zram2. Priority:5 extents:1 across:506380k SS
[ 15.410949] zram3: detected capacity change from 0 to 518537216
[ 15.421126] Adding 506380k swap on /dev/zram3. Priority:5 extents:1 across:506380k SS
[ 16.079807] Bridge firewalling registered
[ 16.119317] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 16.498733] Netfilter messages via NETLINK v0.30.
[ 16.501952] ctnetlink v0.93: registering with nfnetlink.
[ 16.705572] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 17.168332] tegradc tegradc.0: unblank
[ 17.168619] tegradc tegradc.1: blank - powerdown
[ 20.115805] fuse init (API version 7.26)
[ 35.965994] vdd-fan: disabling
[ 35.966034] vdd-usb-vbus: disabling
[ 35.966064] vdd-usb-vbus2: disabling
[ 35.966161] vddio-sdmmc3-ap: disabling
[ 35.966795] avdd-io-edp-1v05: disabling
[ 35.966826] vdd-usb-hub-en: disabling
[ 73.073954] tegradc tegradc.0: unblank
[ 73.073962] tegradc tegradc.1: blank - powerdown