[0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 觨/歊lk_early initialized 賏C: N滵ail_early initialized 鄤n殞use initialized hwwdt initialized ?sec漮194_ec_get_ec_list: found 45 ecs 酳re externa歋c initialized vmon_setup_monitors: found 3 monitors vmon initialized 鄟 D榥dc initialized 賏殞mon_populate_monitors: found 73 monitors ?found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Au歊lk_dt_late initialized 輍滱oc_late initialized ?漥m_post initialized dbells initialized ?1 歍mce initialized cvc initialized ?3:23:20 UTC榥vfs_clk_mach_post initialized ?2022榥vfs_clk_platform_post initialized ?a歊vc_late initialized regulator_post initialized 跾rch6漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized ? I/TC: WARNIN漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] 觩: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.606] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.629] I> edid read success [0003.641] I> edid read success [0003.641] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 1920, height = 1080, frequency = 148500000 [0003.642] I> width = 1280, height = 768, frequency = 79500000 [0003.643] I> width = 1360, height = 768, frequency = 85500000 [0003.643] I> width = 720, height = 480, frequency = 26973026 [0003.647] I> width = 720, height = 576, frequency = 26973026 [0003.652] I> width = 1280, height = 720, frequency = 74175824 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1920, height = 1080, frequency = 148351648 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 720, height = 480, frequency = 26973026 [0003.681] I> width = 720, height = 576, frequency = 26973026 [0003.686] I> width = 3840, height = 2160, frequency = 296703296 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 4096, height = 2160, frequency = 296703296 [0003.715] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.726] I> hdmi_enable, starting HDMI initialisation [0003.731] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.742] calling apps_init() [0003.742] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... 觨/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000879] Console: colour dummy device 80x25 [ 0.002343] printk: console [tty0] enabled [ 0.002415] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002470] pid_max: default: 32768 minimum: 301 [ 0.002701] LSM: Security Framework initializing [ 0.002766] Yama: becoming mindful. [ 0.002833] SELinux: Initializing. [ 0.003032] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003069] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006113] rcu: Hierarchical SRCU implementation. [ 0.006355] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007755] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007813] DTB Build time: Aug 10 2022 20:31:49 [ 0.011814] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.012163] Remapping and enabling EFI services. [ 0.014604] smp: Bringing up secondary CPUs ... [ 0.043660] Detected PIPT I-cache on CPU1 [ 0.043752] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074232] Detected PIPT I-cache on CPU2 [ 0.074379] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103872] Detected PIPT I-cache on CPU3 [ 0.103971] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133656] Detected PIPT I-cache on CPU4 [ 0.133813] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163442] Detected PIPT I-cache on CPU5 [ 0.163632] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163994] smp: Brought up 1 node, 6 CPUs [ 0.164233] SMP: Total of 6 processors activated. [ 0.164300] CPU features: detected: Privileged Access Never [ 0.164325] CPU features: detected: LSE atomic instructions [ 0.164340] CPU features: detected: User Access Override [ 0.164354] CPU features: detected: 32-bit EL0 Support [ 0.164368] CPU features: detected: RAS Extension Support [ 0.164381] CPU features: detected: CRC32 instructions [ 0.164395] CPU features: detected: 32-bit EL1 Support [ 0.231065] CPU: All CPU(s) started at EL2 [ 0.237633] devtmpfs: initialized [ 0.285779] Registered cp15_barrier emulation handler [ 0.285905] Registered setend emulation handler [ 0.285928] KASLR enabled [ 0.286170] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286200] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287472] pinctrl core: initialized pinctrl subsystem [ 0.288495] SMBIOS 3.0.0 present. [ 0.288525] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289121] NET: Registered protocol family 16 [ 0.291015] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291519] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292231] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292292] audit: initializing netlink subsys (disabled) [ 0.292556] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292943] thermal_sys: Registered thermal governor 'step_wise' [ 0.292949] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292966] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295000] cpuidle: using governor menu [ 0.295340] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295718] ASID allocator initialised with 32768 entries [ 0.295955] Serial: AMBA PL011 UART driver [ 0.298953] Tegra reboot handler registered. [ 0.369778] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.369898] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.370134] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.370181] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.370303] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.370346] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.370459] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.370506] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.370627] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.370670] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.372847] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.372884] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.372913] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.372940] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.372969] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.373008] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.373039] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.373070] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.373097] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.373122] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.373148] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.373174] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.373200] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.373246] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.373272] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.373298] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.373324] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.373410] mc-err: mcerr ops are set to t19x [ 0.386485] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.386514] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.386530] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.386545] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.393183] ACPI: Interpreter disabled. [ 0.394427] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.395705] iommu: Default domain type: Translated [ 0.395776] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396139] SCSI subsystem initialized [ 0.396328] usbcore: registered new interface driver usbfs [ 0.396375] usbcore: registered new interface driver hub [ 0.396412] usbcore: registered new device driver usb [ 0.396824] mc: Linux media interface: v0.10 [ 0.396857] videodev: Linux video capture interface: v2.00 [ 0.397161] pps_core: LinuxPPS API ver. 1 registered [ 0.397175] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.397201] PTP clock support registered [ 0.397414] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.397824] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.397917] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.398737] Registered efivars operations [ 0.404360] FPGA manager framework [ 0.404506] Advanced Linux Sound Architecture Driver Initialized. [ 0.405219] Bluetooth: Core ver 2.22 [ 0.405266] NET: Registered protocol family 31 [ 0.405282] Bluetooth: HCI device and connection manager initialized [ 0.405304] Bluetooth: HCI socket layer initialized [ 0.405324] Bluetooth: L2CAP socket layer initialized [ 0.405352] Bluetooth: SCO socket layer initialized [ 0.406892] camchar: rtcpu character device driver loaded [ 0.407658] clocksource: Switched to clocksource arch_sys_counter [ 0.696937] VFS: Disk quotas dquot_6.6.0 [ 0.697014] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.697308] pnp: PnP ACPI: disabled [ 0.710928] la/ptsa driver initialized. [ 0.711083] NET: Registered protocol family 2 [ 0.711245] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.715917] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.715990] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.716294] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.716746] TCP: Hash tables configured (established 65536 bind 65536) [ 0.716866] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.716965] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.717168] NET: Registered protocol family 1 [ 0.718143] RPC: Registered named UNIX socket transport module. [ 0.718183] RPC: Registered udp transport module. [ 0.718206] RPC: Registered tcp transport module. [ 0.718227] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.718259] PCI: CLS 0 bytes, default 64 [ 0.718608] Trying to unpack rootfs image as initramfs... [ 0.985842] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.989196] Freeing initrd memory: 8196K [ 0.994032] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.994068] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.994108] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.994496] kvm [1]: IPA Size Limit: 40 bits [ 0.995036] kvm [1]: vgic interrupt IRQ9 [ 0.995597] kvm [1]: VHE mode initialized successfully [ 0.997299] Initialise system trusted keyrings [ 0.997655] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.004737] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.005636] NFS: Registering the id_resolver key type [ 1.005680] Key type id_resolver registered [ 1.005710] Key type id_legacy registered [ 1.005803] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.005841] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.005887] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.015624] NET: Registered protocol family 38 [ 1.015695] Key type asymmetric registered [ 1.015711] Asymmetric key parser 'x509' registered [ 1.015760] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.016089] io scheduler mq-deadline registered [ 1.016109] io scheduler kyber registered [ 1.022210] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.025477] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.025587] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.025690] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.025787] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.025857] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.032355] scrncapt: init (heads:4 wins:6 planes:4) [ 1.032746] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.033645] EINJ: ACPI disabled. [ 1.037209] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.037235] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.037249] tegra-pmc: ### PMC reset level: L1 [ 1.037263] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.037321] tegra-pmc: PMC Prod config success [ 1.042622] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.062146] random: fast init done [ 1.071051] printk: console [ttyTCU0] enabled [ 2.600415] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.605064] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.609647] arm-smmu 10000000.iommu: stage 1 translation [ 2.615014] arm-smmu 10000000.iommu: stage 2 translation [ 2.620658] arm-smmu 10000000.iommu: nested translation [ 2.625709] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.633144] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.644137] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.645988] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.652583] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.660330] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.665874] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.670334] arm-smmu 12000000.iommu: stage 1 translation [ 2.675842] arm-smmu 12000000.iommu: stage 2 translation [ 2.681524] arm-smmu 12000000.iommu: nested translation [ 2.686695] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.693878] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.705377] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.706972] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.713850] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.720948] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.731063] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.733995] tegra_profiler: auth: init [ 2.738695] THERMAL EST: found 3 subdevs [ 2.741909] THERMAL EST num_resources: 0 [ 2.745751] [THERMAL EST subdev 0] [ 2.748838] [THERMAL EST subdev 1] [ 2.752493] [THERMAL EST subdev 2] [ 2.755460] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.762184] THERMAL EST: thz register success. [ 2.766185] THERMAL EST: end of probe, return err: 0 [ 2.771786] nvsciipc: loaded module [ 2.778972] tun: Universal TUN/TAP device driver, 1.6 [ 2.781313] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.787506] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.792816] e1000e: Intel(R) PRO/1000 Network Driver [ 2.797988] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.803833] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.809108] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.815612] PPP generic driver version 2.4.2 [ 2.819873] PPP BSD Compression module registered [ 2.824077] PPP Deflate Compression module registered [ 2.829326] PPP MPPE Compression module registered [ 2.834606] usbcore: registered new interface driver r8152 [ 2.840156] usbcore: registered new interface driver asix [ 2.845194] usbcore: registered new interface driver ax88179_178a [ 2.851565] usbcore: registered new interface driver cdc_ether [ 2.857257] usbcore: registered new interface driver net1080 [ 2.862886] usbcore: registered new interface driver cdc_subset [ 2.869183] usbcore: registered new interface driver zaurus [ 2.874616] usbcore: registered new interface driver cdc_ncm [ 2.880303] usbcore: registered new interface driver aqc111 [ 2.885909] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.891996] ohci-pci: OHCI PCI platform driver [ 2.896572] ohci-platform: OHCI generic platform driver [ 2.902673] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.908933] usbcore: registered new interface driver uas [ 2.912842] usbcore: registered new interface driver usb-storage [ 2.918743] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.925087] mousedev: PS/2 mouse device common for all mice [ 2.929748] usbcore: registered new interface driver xpad [ 2.938042] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.940768] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.948528] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.955119] i2c /dev entries driver [ 2.958181] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.964225] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.969256] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.974710] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.980027] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.985529] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.990918] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.004587] device-mapper: uevent: version 1.0.3 [ 3.005014] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.011309] cpuidle: Initializing cpuidle driver [ 3.015354] sdhci: Secure Digital Host Controller Interface driver [ 3.020088] sdhci: Copyright(c) Pierre Ossman [ 3.024451] Synopsys Designware Multimedia Card Interface Driver [ 3.030403] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.036515] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.037283] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.049704] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.071036] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.080902] vdd-1v0: supplied by regulator-dummy [ 3.086455] vdd-1v8-hs: supplied by regulator-dummy [ 3.091335] vdd-1v8-ls: supplied by regulator-dummy [ 3.096209] vdd-1v8-ao: supplied by regulator-dummy [ 3.100156] vddio-ddr-1v1: supplied by regulator-dummy [ 3.104791] vdd-rtc: supplied by regulator-dummy [ 3.106546] spmic-ldo1: supplied by regulator-dummy [ 3.107955] vdd-ao-3v3: supplied by regulator-dummy [ 3.114256] vddio-emmc-3v3: supplied by regulator-dummy [ 3.120622] spmic-ldo4: supplied by regulator-dummy [ 3.121904] vdd-usb-3v3: supplied by regulator-dummy [ 3.128146] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.134495] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.140122] spmic-ldo8: supplied by vdd-1v8-ls [ 3.141667] gpio-510 (gpio_default): hogged as output/high [ 3.143033] gpio-511 (gpio_default): hogged as output/high [ 3.146015] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.282440] max77686-rtc max77620-rtc: registered as rtc0 [ 3.283558] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.283942] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 4.114969] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.116131] hid: raw HID events driver (C) Jiri Kosina [ 4.116989] usbcore: registered new interface driver usbhid [ 4.117124] usbhid: USB HID core driver [ 4.119206] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.120748] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 27.053760] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.128025] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.777 ms, total boot 75.072 ms) 墁 4.205082] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.205781] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.207015] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.208024] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.209818] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.210572] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.211341] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.212645] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.212873] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.215443] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.221643] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.227879] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.232819] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.239431] denver_knobs_init:MTS_VERSION:55637613 [ 4.252238] t19x_cache tegra-cache: probed [ 4.256221] optee: probing for conduit method. [ 4.257157] optee: revision 3.16 (65cc2218) [ 4.258524] optee: dynamic shared memory is enabled [ 4.259912] optee: initialized driver [ 4.268410] nvpmodel: initialized successfully [ 4.269244] tegra_hv: get_hvd: not initialized yet [ 4.272057] user_ivc_mempool: hypervisor not present [ 4.278173] usbcore: registered new interface driver snd-usb-audio [ 4.284827] u32 classifier [ 4.285769] input device check on [ 4.289700] Actions configured [ 4.293260] Initializing XFRM netlink socket [ 4.298012] NET: Registered protocol family 10 [ 4.305223] Segment Routing with IPv6 [ 4.305570] NET: Registered protocol family 17 [ 4.309688] NET: Registered protocol family 15 [ 4.314372] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.327953] Bluetooth: RFCOMM socket layer initialized [ 4.332654] Bluetooth: RFCOMM ver 1.11 [ 4.336353] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.342413] Bluetooth: HIDP socket layer initialized [ 4.348161] 9pnet: Installing 9P2000 support [ 4.351821] Key type dns_resolver registered [ 4.357231] registered taskstats version 1 [ 4.360048] Loading compiled-in X.509 certificates [ 4.372398] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.375762] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.386355] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.388253] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.396520] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.405148] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.519888] tegra194-pcie 14160000.pcie: Link up [ 4.522551] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.522794] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.522954] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.523191] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.523390] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.523839] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.524275] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.537862] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.538377] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.538841] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.540487] pci 0004:01:00.0: supports D1 D2 [ 4.540665] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.549243] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.549669] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.549944] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.550317] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.550607] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.550807] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.554568] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.561821] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.570646] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.580822] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.585514] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.590805] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.597770] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.607023] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.608447] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.616808] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.625677] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.740936] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.741569] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.741864] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.742021] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.742295] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.742492] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.742851] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.743276] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.759115] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.759552] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.761546] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.762734] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.764473] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.765965] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.766722] pci 0005:00:00.0: Removing from iommu group 7 [ 5.767052] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.796554] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.817787] host1x 13e10000.host1x: initialized [ 5.819228] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.820287] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.821251] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.821956] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.822884] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.823548] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.824692] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.825387] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.833985] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.840850] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.851076] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.858292] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.868061] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.874836] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.884736] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.892136] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.902014] falcon 15340000.vic: Adding to iommu group 17 [ 5.916781] falcon 15340000.vic: initialized [ 5.917876] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.923552] falcon 15380000.nvjpg: initialized [ 5.924175] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.934577] falcon 154c0000.nvenc: initialized [ 5.935157] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.944944] falcon 15a80000.nvenc1: initialized [ 5.945662] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.957373] nvdec 15480000.nvdec: initialized [ 5.958114] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.968402] nvdec 15140000.nvdec1: initialized [ 5.968953] tsec 15500000.tsec: Adding to iommu group 18 [ 5.974701] tsec 15500000.tsec: initialized [ 5.975187] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.981527] tsec 15100000.tsecb: initialized [ 5.985329] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.010192] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.022946] gpio-374 (wifi-enable): hogged as output/high [ 6.023290] gpio-431 (camera-control-output-low): hogged as output/low [ 6.023614] gpio-432 (camera-control-output-low): hogged as output/low [ 6.025481] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.027308] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.027982] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.033117] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.038466] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.044370] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.049808] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.057747] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.065455] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.076768] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.082063] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.087990] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.097180] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.106522] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.113811] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.121646] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.127310] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.137482] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.143493] pva 16000000.pva0: Adding to iommu group 22 [ 6.170266] pva 16000000.pva0: initialized [ 6.175236] pva 16800000.pva1: Adding to iommu group 23 [ 6.186795] pva 16800000.pva1: initialized [ 6.191236] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.203399] nvdla 15880000.nvdla0: initialized [ 6.204781] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.213674] nvdla 158c0000.nvdla1: initialized [ 6.217596] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.217652] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.217855] tegradc 15200000.display: Adding to iommu group 26 [ 6.217930] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.218254] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.218571] tegradccommon 15200000.display-hub: dma mapping done [ 6.219605] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.226813] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.226875] tegradc 15210000.display: Adding to iommu group 26 [ 6.227377] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.234010] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.234214] generic_infoframe_type: 0x87 [ 6.234344] tegradc 15200000.display: DT parsed successfully [ 6.234488] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.260508] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.268050] tegra_cec 3960000.tegra_cec: probed [ 6.269198] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.276355] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.276364] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.287510] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.297367] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.303504] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.322251] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.322701] kfuse 3830000.kfuse: initialized [ 6.338471] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.344101] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.344835] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.351100] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.364033] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.364712] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.372468] tegradc 15210000.display: disp0 connected to head1->sor [ 6.381571] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.386089] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.392061] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.398827] tegradc 15210000.display: DT parsed successfully [ 6.408699] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.413287] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.427420] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.447124] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.447463] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.450857] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.458994] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.467731] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.474348] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.481710] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.489066] usb usb1: Product: xHCI Host Controller [ 6.494200] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.500292] usb usb1: SerialNumber: 3610000.xhci [ 6.505978] hub 1-0:1.0: USB hub found [ 6.509106] hub 1-0:1.0: 4 ports detected [ 6.513436] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.518587] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.526103] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.533951] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.541464] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.548955] usb usb2: Product: xHCI Host Controller [ 6.553620] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.559866] usb usb2: SerialNumber: 3610000.xhci [ 6.565701] hub 2-0:1.0: USB hub found [ 6.568655] hub 2-0:1.0: 4 ports detected [ 6.606949] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.613056] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.614417] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.614599] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.627793] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.628809] tegra194-cpufreq ccplex: probed with BWMGR [ 6.630094] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.630732] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.631219] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.632592] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.643770] mmc0: CQHCI version 5.10 [ 6.645046] tegra194-vi5 15c10000.vi: initialized [ 6.647377] tegradc 15210000.display: disp0 connected to head1->sor [ 6.648375] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.652068] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.658375] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.665562] tegradc 15210000.display: DT parsed successfully [ 6.673453] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.679088] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.679142] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.685783] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.693624] generic_infoframe_type: 0x87 [ 6.699811] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.706610] tegradc 15200000.display: DT parsed successfully [ 6.710412] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.715725] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.717273] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.719151] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.722871] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.735738] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.744068] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.751701] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.751705] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.766593] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.774872] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.775700] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.781892] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.782061] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.797073] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.810012] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.816343] nvethernet 2490000.ethernet: Macsec not supported [ 6.829844] tegradc 15200000.display: probed [ 6.853653] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.862155] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.866472] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.873629] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.881571] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.888062] tegra-se-nvhost 15810000.se: initialized [ 6.896331] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.897884] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.904655] tegra-se-nvhost 15820000.se: initialized [ 6.905172] mmc0: Command Queue Engine enabled [ 6.913081] mmc0: periodic cache flush enabled [ 6.913098] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.913444] Console: switching to colour frame buffer device 240x67 [ 6.913684] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.913697] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.914178] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.917579] tegradc 15200000.display: fb registered [ 6.924355] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.930430] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.941400] tegra-se-nvhost 15830000.se: initialized [ 6.948240] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.953695] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.959616] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.965732] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.976660] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.983068] tegra-se-nvhost 15840000.se: initialized [ 6.996820] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.004294] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.007084] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.017045] tegra_actmon d230000.actmon: in actmon_register()... [ 7.021521] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.028570] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.048663] usb 1-2: Manufacturer: Generic [ 7.049640] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.052600] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.060521] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.074522] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.074659] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.081941] hub 1-2:1.0: USB hub found [ 7.082375] hvc_sysfs: hypervisor is not present [ 7.089042] Extcon AUX1(HDMI) enable [ 7.089164] tegradc 15210000.display: disp1 connected to head1->sor [ 7.094370] hub 1-2:1.0: 4 ports detected [ 7.097390] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.118845] tegradc 15210000.display: DT parsed successfully [ 7.118855] ALSA device list: [ 7.124325] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.127333] No soundcards found. [ 7.135885] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.145398] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.145438] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.165595] tegradc 15210000.display: probed [ 7.165894] tegradc 15210000.display: fb registered [ 7.171610] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.175684] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.177445] Freeing unused kernel memory: 3968K [ 7.183147] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.193476] tegradc 15210000.display: blank - powerdown [ 7.198599] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.199789] Run /init as init process [ 7.206578] Extcon DP: HPD disabled [ 7.210442] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.213922] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.222022] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.222027] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.222031] usb 2-3: Manufacturer: Generic [ 7.244677] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.251533] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.257274] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.262848] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.275090] hub 2-3:1.0: USB hub found [ 7.277168] hub 2-3:1.0: 4 ports detected [ 7.296038] Root device found: mmcblk0p1 [ 7.298183] Found dev node: /dev/mmcblk0p1 榳ARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk 墁 7.301186] tegradc 15200000.display: blank - powerdown [ 7.307727] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.332916] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.336842] Rootfs mounted over mmcblk0p1 [ 7.345735] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.345739] Extcon AUX1(HDMI) disable [ 7.369476] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.370279] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.372103] Switching from initrd to actual rootfs [ 7.383759] tegradc 15200000.display: unblank [ 7.384768] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.384980] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.390694] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.392636] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.396709] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.396713] Extcon AUX1(HDMI) enable [ 7.409402] tegradc 15200000.display: sync windows ret = 247 [ 7.440114] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.441654] Extcon HDMI: HPD enabled [ 7.443093] tegradc 15200000.display: hdmi: plugged [ 7.456992] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.458418] random: crng init done [ 7.458519] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.458531] usb 1-3: Product: Bluetooth Radio [ 7.462568] usb 1-3: Manufacturer: Realtek [ 7.464177] usb 1-3: SerialNumber: 00e04c000001 [ 7.536217] systemd[1]: System time before build time, advancing clock. [ 7.606297] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.611370] systemd[1]: Detected architecture arm64. [ 7.678700] systemd[1]: Set hostname to . [ 7.843386] systemd-sysv-generator[258]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.194168] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.195971] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.201570] systemd[1]: Created slice system-modprobe.slice. [ 8.206439] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.210726] systemd[1]: Created slice User and Session Slice. [ 8.214213] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.218356] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.221697] systemd[1]: Reached target User and Group Name Lookups. [ 8.224824] systemd[1]: Reached target Slices. [ 8.227880] systemd[1]: Reached target Swap. [ 8.231835] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.235411] systemd[1]: Listening on Syslog Socket. [ 8.239005] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.242397] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.246501] systemd[1]: Listening on Journal Audit Socket. [ 8.250075] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.253745] systemd[1]: Listening on Journal Socket. [ 8.257409] systemd[1]: Listening on udev Control Socket. [ 8.260867] systemd[1]: Listening on udev Kernel Socket. [ 8.270843] systemd[1]: Mounting Huge Pages File System... [ 8.280939] systemd[1]: Mounting POSIX Message Queue File System... [ 8.289024] systemd[1]: Mounting RPC Pipe File System... [ 8.297544] systemd[1]: Mounting Kernel Debug File System... [ 8.306513] systemd[1]: Mounting Kernel Trace File System... [ 8.316702] systemd[1]: Starting Journal Service... [ 8.325811] systemd[1]: Starting Set the console keyboard layout... [ 8.334212] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.337704] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.344012] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.353465] systemd[1]: Started Nameserver information manager. [ 8.359622] systemd[1]: Reached target Network (Pre). [ 8.366765] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.369170] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.377359] systemd[1]: Starting Load Kernel Modules... [ 8.385019] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.394065] systemd[1]: Starting udev Coldplug all Devices... [ 8.403937] systemd[1]: Mounted Huge Pages File System. [ 8.407571] systemd[1]: Mounted POSIX Message Queue File System. [ 8.411190] systemd[1]: Mounted RPC Pipe File System. [ 8.414946] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.415801] systemd[1]: Mounted Kernel Debug File System. [ 8.416738] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.420015] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.420022] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.420030] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.420034] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.420279] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.420443] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.420607] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.430574] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.435216] systemd[1]: Mounted Kernel Trace File System. [ 8.441379] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.448310] systemd[1]: nvfb-udev.service: Succeeded. [ 8.453456] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.465403] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.470909] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.472686] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.486210] systemd[1]: Starting Load/Save Random Seed... [ 8.495742] systemd[1]: Starting Create System Users... [ 8.536536] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.536536] [ 8.545870] systemd[1]: Finished Load/Save Random Seed. [ 8.558856] systemd[1]: Finished Create System Users. [ 8.567160] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.574120] systemd[1]: Finished Load Kernel Modules. [ 8.578754] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.585186] systemd[1]: Mounting Kernel Configuration File System... [ 8.594085] systemd[1]: Started OP-TEE Client Supplicant. [ 8.602863] systemd[1]: Starting Apply Kernel Variables... [ 8.613162] systemd[1]: Finished Set the console keyboard layout. [ 8.617562] systemd[1]: Mounted Kernel Configuration File System. [ 8.624037] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.627978] systemd[1]: Reached target Local File Systems (Pre). [ 8.631054] systemd[1]: Reached target Local File Systems. [ 10.176273] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.185610] imx219 9-0010: board setup failed [ 10.186968] imx219: probe of 9-0010 failed with error -121 [ 10.204821] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.212632] imx219 10-0010: board setup failed [ 10.214109] imx219: probe of 10-0010 failed with error -121 [ 10.237603] hot-surface-alert cooling state: 0 -> 1 [ 10.787136] using random self ethernet address [ 10.805808] using random host ethernet address [ 12.076541] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.076547] Creating 1 MTD partitions on "spi6.0": [ 12.076556] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.524219] using random self ethernet address [ 12.525313] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.010129] nvidia: loading out-of-tree module taints kernel. [ 58.301522] watchdog: watchdog0: watchdog did not stop! [ 58.820549] Trying to unregister non-registered hwtime source [ 61.887173] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.888658] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ? [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 66500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.905] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.922] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.323] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 觨/歊lk_early initialized 賏C: N滵ail_early initialized 鄤n殞use initialized hwwdt initialized ?sec漮194_ec_get_ec_list: found 45 ecs 酳re externa歋c initialized vmon_setup_monitors: found 3 monitors vmon initialized 鄟 D榥dc initialized 賏殞mon_populate_monitors: found 73 monitors ?found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 歊lk_dt_late initialized noc_late initialized ?漥m_post initialized dbells initialized ? 0歍mce initialized ?歊vc initialized ?23:20 UTC 2榥vfs_clk_mach_post initialized ?22 榥vfs_clk_platform_post initialized 跾ar歊vc_late initialized regulator_post initialized 踄h64漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized ? I/TC: WARNIN漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] 觩: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.746] calling apps_init() [0003.747] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... 觨/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000676] Console: colour dummy device 80x25 [ 0.002055] printk: console [tty0] enabled [ 0.002120] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002155] pid_max: default: 32768 minimum: 301 [ 0.002323] LSM: Security Framework initializing [ 0.002385] Yama: becoming mindful. [ 0.002427] SELinux: Initializing. [ 0.002573] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002609] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005405] rcu: Hierarchical SRCU implementation. [ 0.005725] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006567] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006620] DTB Build time: Aug 10 2022 20:31:49 [ 0.009504] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009748] Remapping and enabling EFI services. [ 0.011800] smp: Bringing up secondary CPUs ... [ 0.041103] Detected PIPT I-cache on CPU1 [ 0.041186] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073527] Detected PIPT I-cache on CPU2 [ 0.073627] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103258] Detected PIPT I-cache on CPU3 [ 0.103352] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133065] Detected PIPT I-cache on CPU4 [ 0.133168] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162879] Detected PIPT I-cache on CPU5 [ 0.162971] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163376] smp: Brought up 1 node, 6 CPUs [ 0.163548] SMP: Total of 6 processors activated. [ 0.163624] CPU features: detected: Privileged Access Never [ 0.163649] CPU features: detected: LSE atomic instructions [ 0.163664] CPU features: detected: User Access Override [ 0.163680] CPU features: detected: 32-bit EL0 Support [ 0.163696] CPU features: detected: RAS Extension Support [ 0.163710] CPU features: detected: CRC32 instructions [ 0.163725] CPU features: detected: 32-bit EL1 Support [ 0.231557] CPU: All CPU(s) started at EL2 [ 0.239201] devtmpfs: initialized [ 0.290634] Registered cp15_barrier emulation handler [ 0.290817] Registered setend emulation handler [ 0.290839] KASLR enabled [ 0.291099] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291124] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292484] pinctrl core: initialized pinctrl subsystem [ 0.293405] SMBIOS 3.0.0 present. [ 0.293463] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294101] NET: Registered protocol family 16 [ 0.296507] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.297049] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297812] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297891] audit: initializing netlink subsys (disabled) [ 0.298124] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.298558] thermal_sys: Registered thermal governor 'step_wise' [ 0.298564] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298577] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.302856] cpuidle: using governor menu [ 0.303399] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303884] ASID allocator initialised with 32768 entries [ 0.304095] Serial: AMBA PL011 UART driver [ 0.307672] Tegra reboot handler registered. [ 0.379223] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.379440] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.379664] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.379713] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.379835] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.379877] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.380010] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.380051] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.380216] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.380258] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.382593] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.382631] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.382665] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.382694] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.382724] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.382751] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.382785] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.382815] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.382845] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.382869] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.382893] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.382917] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.382941] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.382965] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.383011] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.383036] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.383075] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.383199] mc-err: mcerr ops are set to t19x [ 0.394719] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.394746] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.394760] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.394773] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.402875] ACPI: Interpreter disabled. [ 0.404613] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.406400] iommu: Default domain type: Translated [ 0.406516] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.407056] SCSI subsystem initialized [ 0.407309] usbcore: registered new interface driver usbfs [ 0.407365] usbcore: registered new interface driver hub [ 0.407418] usbcore: registered new device driver usb [ 0.408102] mc: Linux media interface: v0.10 [ 0.408151] videodev: Linux video capture interface: v2.00 [ 0.408623] pps_core: LinuxPPS API ver. 1 registered [ 0.408643] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408674] PTP clock support registered [ 0.408967] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.409371] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.409528] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.410688] Registered efivars operations [ 0.419192] FPGA manager framework [ 0.419354] Advanced Linux Sound Architecture Driver Initialized. [ 0.420211] Bluetooth: Core ver 2.22 [ 0.420268] NET: Registered protocol family 31 [ 0.420286] Bluetooth: HCI device and connection manager initialized [ 0.420308] Bluetooth: HCI socket layer initialized [ 0.420326] Bluetooth: L2CAP socket layer initialized [ 0.420385] Bluetooth: SCO socket layer initialized [ 0.422518] camchar: rtcpu character device driver loaded [ 0.423801] clocksource: Switched to clocksource arch_sys_counter [ 0.844184] VFS: Disk quotas dquot_6.6.0 [ 0.844281] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.844755] pnp: PnP ACPI: disabled [ 0.859504] la/ptsa driver initialized. [ 0.859673] NET: Registered protocol family 2 [ 0.859926] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.867487] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.867680] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.868077] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.868713] TCP: Hash tables configured (established 65536 bind 65536) [ 0.868939] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.869086] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.869399] NET: Registered protocol family 1 [ 0.870334] RPC: Registered named UNIX socket transport module. [ 0.870372] RPC: Registered udp transport module. [ 0.870388] RPC: Registered tcp transport module. [ 0.870404] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.870448] PCI: CLS 0 bytes, default 64 [ 0.870793] Trying to unpack rootfs image as initramfs... [ 1.140026] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.143204] Freeing initrd memory: 8196K [ 1.148408] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.148446] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.148482] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.148873] kvm [1]: IPA Size Limit: 40 bits [ 1.149475] kvm [1]: vgic interrupt IRQ9 [ 1.150013] kvm [1]: VHE mode initialized successfully [ 1.151620] Initialise system trusted keyrings [ 1.152104] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.158273] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.159131] NFS: Registering the id_resolver key type [ 1.159172] Key type id_resolver registered [ 1.159189] Key type id_legacy registered [ 1.159278] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.159305] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.159349] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.169665] NET: Registered protocol family 38 [ 1.169697] Key type asymmetric registered [ 1.169714] Asymmetric key parser 'x509' registered [ 1.169780] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.170037] io scheduler mq-deadline registered [ 1.170060] io scheduler kyber registered [ 1.176444] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.179709] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.179882] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.180000] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.180101] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.180181] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.186434] scrncapt: init (heads:4 wins:6 planes:4) [ 1.186531] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.187620] EINJ: ACPI disabled. [ 1.191180] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.191210] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.191226] tegra-pmc: ### PMC reset level: L1 [ 1.191240] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.191316] tegra-pmc: PMC Prod config success [ 1.196876] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.223769] random: fast init done [ 1.225314] printk: console [ttyTCU0] enabled [ 2.754683] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.759428] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.764019] arm-smmu 10000000.iommu: stage 1 translation [ 2.769143] arm-smmu 10000000.iommu: stage 2 translation [ 2.774897] arm-smmu 10000000.iommu: nested translation [ 2.779977] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.787173] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.798339] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.800275] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.807101] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.814596] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.820133] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.824603] arm-smmu 12000000.iommu: stage 1 translation [ 2.830367] arm-smmu 12000000.iommu: stage 2 translation [ 2.835534] arm-smmu 12000000.iommu: nested translation [ 2.841222] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.848396] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.859132] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.861520] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.868082] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.875567] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.885725] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.888593] tegra_profiler: auth: init [ 2.892858] THERMAL EST: found 3 subdevs [ 2.895920] THERMAL EST num_resources: 0 [ 2.900018] [THERMAL EST subdev 0] [ 2.903090] [THERMAL EST subdev 1] [ 2.906753] [THERMAL EST subdev 2] [ 2.909773] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.916281] THERMAL EST: thz register success. [ 2.920457] THERMAL EST: end of probe, return err: 0 [ 2.925815] nvsciipc: loaded module [ 2.933005] tun: Universal TUN/TAP device driver, 1.6 [ 2.935227] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.941513] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.947359] e1000e: Intel(R) PRO/1000 Network Driver [ 2.951996] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.958072] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.963629] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.969752] PPP generic driver version 2.4.2 [ 2.974049] PPP BSD Compression module registered [ 2.978612] PPP Deflate Compression module registered [ 2.983880] PPP MPPE Compression module registered [ 2.988612] usbcore: registered new interface driver r8152 [ 2.994426] usbcore: registered new interface driver asix [ 2.999475] usbcore: registered new interface driver ax88179_178a [ 3.005864] usbcore: registered new interface driver cdc_ether [ 3.011552] usbcore: registered new interface driver net1080 [ 3.017414] usbcore: registered new interface driver cdc_subset [ 3.023449] usbcore: registered new interface driver zaurus [ 3.029144] usbcore: registered new interface driver cdc_ncm [ 3.034795] usbcore: registered new interface driver aqc111 [ 3.040173] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.046298] ohci-pci: OHCI PCI platform driver [ 3.050815] ohci-platform: OHCI generic platform driver [ 3.056604] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.063015] usbcore: registered new interface driver uas [ 3.066867] usbcore: registered new interface driver usb-storage [ 3.073274] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.079337] mousedev: PS/2 mouse device common for all mice [ 3.084043] usbcore: registered new interface driver xpad [ 3.092177] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.094739] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.102825] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.109134] i2c /dev entries driver [ 3.112430] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.118280] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.123588] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.128959] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.134560] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.140137] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.145498] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.160822] device-mapper: uevent: version 1.0.3 [ 3.161271] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.165740] cpuidle: Initializing cpuidle driver [ 3.169760] sdhci: Secure Digital Host Controller Interface driver [ 3.174387] sdhci: Copyright(c) Pierre Ossman [ 3.178456] Synopsys Designware Multimedia Card Interface Driver [ 3.184648] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.190672] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.191562] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.204205] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.227279] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.237278] vdd-1v0: supplied by regulator-dummy [ 3.242830] vdd-1v8-hs: supplied by regulator-dummy [ 3.247632] vdd-1v8-ls: supplied by regulator-dummy [ 3.252545] vdd-1v8-ao: supplied by regulator-dummy [ 3.256474] vddio-ddr-1v1: supplied by regulator-dummy [ 3.261044] vdd-rtc: supplied by regulator-dummy [ 3.262865] spmic-ldo1: supplied by regulator-dummy [ 3.264157] vdd-ao-3v3: supplied by regulator-dummy [ 3.270399] vddio-emmc-3v3: supplied by regulator-dummy [ 3.276676] spmic-ldo4: supplied by regulator-dummy [ 3.278076] vdd-usb-3v3: supplied by regulator-dummy [ 3.284348] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.290601] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.296266] spmic-ldo8: supplied by vdd-1v8-ls [ 3.297764] gpio-510 (gpio_default): hogged as output/high [ 3.299165] gpio-511 (gpio_default): hogged as output/high [ 3.302221] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.438369] max77686-rtc max77620-rtc: registered as rtc0 [ 3.439689] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.440044] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 4.307532] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.308758] hid: raw HID events driver (C) Jiri Kosina [ 4.309703] usbcore: registered new interface driver usbhid [ 4.309857] usbhid: USB HID core driver [ 4.312209] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.313881] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 27.371212] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.444677] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 74.272 ms) 墁 4.397631] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.398246] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.399471] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.400610] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.402696] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.403370] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.404119] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.405866] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.406076] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.409464] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.414026] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.420447] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.425366] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.432092] denver_knobs_init:MTS_VERSION:55637613 [ 4.444776] t19x_cache tegra-cache: probed [ 4.449450] optee: probing for conduit method. [ 4.450318] optee: revision 3.16 (65cc2218) [ 4.451689] optee: dynamic shared memory is enabled [ 4.453159] optee: initialized driver [ 4.460469] nvpmodel: initialized successfully [ 4.461311] tegra_hv: get_hvd: not initialized yet [ 4.464652] user_ivc_mempool: hypervisor not present [ 4.471132] usbcore: registered new interface driver snd-usb-audio [ 4.477085] u32 classifier [ 4.478328] input device check on [ 4.482055] Actions configured [ 4.485998] Initializing XFRM netlink socket [ 4.491018] NET: Registered protocol family 10 [ 4.498361] Segment Routing with IPv6 [ 4.498667] NET: Registered protocol family 17 [ 4.502420] NET: Registered protocol family 15 [ 4.506644] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.520263] Bluetooth: RFCOMM socket layer initialized [ 4.524916] Bluetooth: RFCOMM ver 1.11 [ 4.529069] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.534647] Bluetooth: HIDP socket layer initialized [ 4.540966] 9pnet: Installing 9P2000 support [ 4.544170] Key type dns_resolver registered [ 4.550187] registered taskstats version 1 [ 4.552782] Loading compiled-in X.509 certificates [ 4.565917] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.568609] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.578617] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.580469] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.589283] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.597385] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.715879] tegra194-pcie 14160000.pcie: Link up [ 4.719016] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.719324] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.719515] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.719741] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.720016] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.720397] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.720850] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.733597] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.734038] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.734496] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.736229] pci 0004:01:00.0: supports D1 D2 [ 4.736396] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.748242] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.748598] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.748817] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.749342] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.749652] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.749835] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.750388] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.757912] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.766607] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.777396] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.781244] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.786948] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.794022] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.803054] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.804395] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.813030] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.821485] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.936761] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.937553] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.937771] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.937922] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.938220] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.938441] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.938838] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.939328] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.954657] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.954989] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.957097] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.958513] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.960253] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.961662] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.962512] pci 0005:00:00.0: Removing from iommu group 7 [ 5.962782] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.994732] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.020312] host1x 13e10000.host1x: initialized [ 6.022250] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.023168] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.024596] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.025431] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.026685] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.027443] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.028732] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.029446] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.030415] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.036760] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.047040] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.053769] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.064211] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.071080] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.080997] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.088168] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.097891] falcon 15340000.vic: Adding to iommu group 17 [ 6.112970] falcon 15340000.vic: initialized [ 6.113935] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.119468] falcon 15380000.nvjpg: initialized [ 6.120265] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.130413] falcon 154c0000.nvenc: initialized [ 6.131155] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.141940] falcon 15a80000.nvenc1: initialized [ 6.142652] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.153773] nvdec 15480000.nvdec: initialized [ 6.154420] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.164109] nvdec 15140000.nvdec1: initialized [ 6.164646] tsec 15500000.tsec: Adding to iommu group 18 [ 6.170459] tsec 15500000.tsec: initialized [ 6.170988] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.178110] tsec 15100000.tsecb: initialized [ 6.182320] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.208677] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.222669] gpio-374 (wifi-enable): hogged as output/high [ 6.223024] gpio-431 (camera-control-output-low): hogged as output/low [ 6.223304] gpio-432 (camera-control-output-low): hogged as output/low [ 6.225150] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.227113] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.227612] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.229074] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.234698] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.240531] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.245660] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.254981] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.261697] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.273302] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.277972] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.283942] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.292957] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.302182] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.309484] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.317062] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.322981] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.332914] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.339168] pva 16000000.pva0: Adding to iommu group 22 [ 6.366637] pva 16000000.pva0: initialized [ 6.371704] pva 16800000.pva1: Adding to iommu group 23 [ 6.383574] pva 16800000.pva1: initialized [ 6.388364] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.402133] nvdla 15880000.nvdla0: initialized [ 6.403568] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.412369] nvdla 158c0000.nvdla1: initialized [ 6.414824] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.415108] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.415464] tegradccommon 15200000.display-hub: dma mapping done [ 6.417958] tegradc 15200000.display: Adding to iommu group 26 [ 6.426549] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.426903] generic_infoframe_type: 0x87 [ 6.427178] tegradc 15200000.display: DT parsed successfully [ 6.427541] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.429005] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.430545] tegradc 15210000.display: Adding to iommu group 26 [ 6.435140] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.441537] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.447330] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.455297] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.461668] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.469134] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.475267] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.484556] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.488902] tegra_cec 3960000.tegra_cec: probed [ 6.489863] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.494486] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.496258] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.507207] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.515649] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.522236] kfuse 3830000.kfuse: initialized [ 6.529624] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.536146] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.542216] tegradc 15210000.display: disp0 connected to head1->sor [ 6.546963] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.547890] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.554153] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.560827] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.566212] tegradc 15210000.display: DT parsed successfully [ 6.574000] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.579379] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.588918] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.617350] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.622834] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.643198] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.643559] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.646324] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.654494] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.662972] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.670020] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.677176] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.684373] usb usb1: Product: xHCI Host Controller [ 6.689556] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.695913] usb usb1: SerialNumber: 3610000.xhci [ 6.701391] hub 1-0:1.0: USB hub found [ 6.704258] hub 1-0:1.0: 4 ports detected [ 6.708953] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.713578] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.721429] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.729250] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.737039] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.743987] usb usb2: Product: xHCI Host Controller [ 6.749228] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.755478] usb usb2: SerialNumber: 3610000.xhci [ 6.760781] hub 2-0:1.0: USB hub found [ 6.763613] hub 2-0:1.0: 4 ports detected [ 6.767814] random: crng init done [ 6.809211] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.814757] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.816369] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.816564] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.829988] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.831071] tegra194-cpufreq ccplex: probed with BWMGR [ 6.832293] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.832805] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.833211] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.834415] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.842319] mmc0: CQHCI version 5.10 [ 6.842323] tegra194-vi5 15c10000.vi: initialized [ 6.846228] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.847688] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.851244] generic_infoframe_type: 0x87 [ 6.857432] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.861409] tegradc 15200000.display: DT parsed successfully [ 6.869465] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.869474] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.869479] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.869511] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.875029] tegradc 15200000.display: Display dc.00000000f1187ee3 registered with id=0 [ 6.894650] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.901874] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.907143] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.908940] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.908948] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.945376] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.946403] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.953565] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.967809] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.969542] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.975503] nvethernet 2490000.ethernet: Macsec not supported [ 6.976926] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.981899] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.988631] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.995925] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 7.002077] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.025437] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.026191] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 7.032494] mmc0: Command Queue Engine enabled [ 7.036285] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.038131] tegra-se-nvhost 15810000.se: initialized [ 7.039560] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 7.044012] mmc0: periodic cache flush enabled [ 7.049062] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.049364] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.050340] tegra-se-nvhost 15820000.se: initialized [ 7.060306] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 7.060310] ************************************** [ 7.060313] CPU:0, Error:cbb-noc [ 7.060316] Error Logger : 0 [ 7.060325] ErrLog0 : 0x80030000 [ 7.060348] Transaction Type : RD - Read, Incrementing [ 7.060350] Error Code : SLV [ 7.060353] Error Source : Target [ 7.060355] Error Description : Target error detected by CBB slave [ 7.060366] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 7.060377] Packet header Lock : 0 [ 7.060379] Packet header Len1 : 3 [ 7.060382] NOC protocol version : version >= 2.7 [ 7.060385] ErrLog1 : 0x35242e [ 7.060387] ErrLog2 : 0x0 [ 7.060408] RouteId : 0x35242e [ 7.060414] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.060423] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 7.061231] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.061359] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.064603] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.066658] Targflow : host1x_p2pm/T/host1x_p2pm [ 7.066670] TargSubRange : 18 [ 7.073705] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.079423] SeqId : 0 [ 7.079427] ErrLog3 : 0x4045c [ 7.079430] ErrLog4 : 0x0 [ 7.079435] Address accessed : 0x15b4045c [ 7.079457] ErrLog5 : 0xb89f851 [ 7.213039] Non-Modify : 0x1 [ 7.216450] AXI ID : 0x17 [ 7.219598] Master ID : CCPLEX [ 7.222753] Security Group(GRPSEC): 0x7e [ 7.227036] Cache : 0x1 -- Bufferable [ 7.231061] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.237711] FALCONSEC : 0x0 [ 7.240603] Virtual Queuing Channel(VQC): 0x0 [ 7.245329] ************************************** [ 7.250194] ------------[ cut here ]------------ [ 7.255124] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.261601] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.266507] Modules linked in: [ 7.269740] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.276129] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.288382] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.294425] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.299159] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.304122] sp : ffff800010003de0 [ 7.307285] x29: ffff800010003de0 x28: 0000000000000001 [ 7.312964] x27: 0000000000000005 x26: ffffbbfd30c53f58 [ 7.318386] x25: ffffbbfd315ace10 x24: 0000000000000001 [ 7.323554] x23: ffffbbfd30f47000 x22: ffffbbfd313cea00 [ 7.328891] x21: 000000000000000f x20: ffff1edc00e66780 [ 7.334661] x19: ffffbbfd313cea00 x18: 0000000000000010 [ 7.339829] x17: ffff800010895000 x16: 0000000000000068 [ 7.345167] x15: ffffbbfd31242bf0 x14: 0720072007200720 [ 7.350679] x13: 0720072007200720 x12: 0720072007200720 [ 7.356449] x11: 0720072007200720 x10: 0720072007200720 [ 7.361965] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.367218] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.372748] x5 : 0000000000057fa8 x4 : ffffbbfd31257968 [ 7.378411] x3 : 00000000ffffffff x2 : ffffbbfd2f6ee090 [ 7.383768] x1 : ffffbbfd31242680 x0 : 0000000100010001 [ 7.388827] Call trace: [ 7.391540] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.395829] __handle_irq_event_percpu+0x68/0x2a0 [ 7.400377] handle_irq_event_percpu+0x40/0xa0 [ 7.404839] handle_irq_event+0x50/0xf0 [ 7.408601] handle_fasteoi_irq+0xc0/0x170 [ 7.412645] generic_handle_irq+0x40/0x60 [ 7.416393] __handle_domain_irq+0x70/0xd0 [ 7.420594] efi_header_end+0xb0/0xf0 [ 7.424368] el1_irq+0xd0/0x180 [ 7.427328] cpuidle_enter_state+0xb8/0x410 [ 7.431525] cpuidle_enter+0x40/0x60 [ 7.435025] call_cpuidle+0x44/0x80 [ 7.438526] do_idle+0x208/0x270 [ 7.441937] cpu_startup_entry+0x30/0x70 [ 7.445446] rest_init+0xdc/0xe8 [ 7.448684] arch_call_rest_init+0x18/0x20 [ 7.452880] start_kernel+0x514/0x54c [ 7.456488] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.462682] ---[ end trace 703d8a42659246c3 ]--- [ 7.467399] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.474925] SMP: stopping secondary CPUs [ 7.478536] Kernel Offset: 0x3bfd1f530000 from 0xffff800010000000 [ 7.484898] PHYS_OFFSET: 0xffffe12500000000 [ 7.489011] CPU features: 0x8240002,03802a30 [ 7.493216] Memory Limit: none [ 7.496371] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ? [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 觨/歊lk_early initialized 賏C: N滵ail_early initialized 鄤殞use initialized hwwdt initialized 鄚-sec漮194_ec_get_ec_list: found 45 ecs 酳re externa歋c initialized vmon_setup_monitors: found 3 monitors vmon initialized 鄟 D榥dc initialized 賏殞mon_populate_monitors: found 73 monitors ?found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 歊lk_dt_late initialized ?滱oc_late initialized ?漥m_post initialized dbells initialized ?03歍mce initialized ?歊vc initialized ?3:20 UTC 20榥vfs_clk_mach_post initialized ?2 a榥vfs_clk_platform_post initialized 跾rc歊vc_late initialized regulator_post initialized 鄣64 漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized ?I/TC: WARNIN漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] 觩: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.207] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.617] E> invalid display type [0003.618] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.647] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.648] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 4096, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.732] I> hdmi_enable, starting HDMI initialisation [0003.737] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.747] calling apps_init() [0003.748] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... 觨/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000637] Console: colour dummy device 80x25 [ 0.002197] printk: console [tty0] enabled [ 0.002258] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002294] pid_max: default: 32768 minimum: 301 [ 0.002497] LSM: Security Framework initializing [ 0.002574] Yama: becoming mindful. [ 0.002641] SELinux: Initializing. [ 0.002785] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002819] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005686] rcu: Hierarchical SRCU implementation. [ 0.005939] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006793] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006829] DTB Build time: Aug 10 2022 20:31:49 [ 0.009736] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009964] Remapping and enabling EFI services. [ 0.011782] smp: Bringing up secondary CPUs ... [ 0.040932] Detected PIPT I-cache on CPU1 [ 0.041009] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071050] Detected PIPT I-cache on CPU2 [ 0.071128] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100819] Detected PIPT I-cache on CPU3 [ 0.100889] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130596] Detected PIPT I-cache on CPU4 [ 0.130673] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160388] Detected PIPT I-cache on CPU5 [ 0.160457] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160855] smp: Brought up 1 node, 6 CPUs [ 0.161037] SMP: Total of 6 processors activated. [ 0.161093] CPU features: detected: Privileged Access Never [ 0.161132] CPU features: detected: LSE atomic instructions [ 0.161146] CPU features: detected: User Access Override [ 0.161159] CPU features: detected: 32-bit EL0 Support [ 0.161172] CPU features: detected: RAS Extension Support [ 0.161184] CPU features: detected: CRC32 instructions [ 0.161196] CPU features: detected: 32-bit EL1 Support [ 0.232155] CPU: All CPU(s) started at EL2 [ 0.237570] devtmpfs: initialized [ 0.289453] Registered cp15_barrier emulation handler [ 0.289579] Registered setend emulation handler [ 0.289620] KASLR enabled [ 0.289907] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289936] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291507] pinctrl core: initialized pinctrl subsystem [ 0.292498] SMBIOS 3.0.0 present. [ 0.292528] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.293082] NET: Registered protocol family 16 [ 0.295163] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295680] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296409] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296493] audit: initializing netlink subsys (disabled) [ 0.296823] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297188] thermal_sys: Registered thermal governor 'step_wise' [ 0.297195] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297212] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299270] cpuidle: using governor menu [ 0.299638] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300128] ASID allocator initialised with 32768 entries [ 0.300354] Serial: AMBA PL011 UART driver [ 0.303857] Tegra reboot handler registered. [ 0.371299] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.371498] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.371747] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.371811] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.371966] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.372012] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.372155] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372204] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372386] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372430] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.374796] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.374833] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.374864] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.374913] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.374946] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375018] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375061] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375115] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375143] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375169] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.375195] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.375221] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.375247] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.375272] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.375302] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.375328] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.375353] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.375446] mc-err: mcerr ops are set to t19x [ 0.387735] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.387760] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.387778] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.387791] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.395165] ACPI: Interpreter disabled. [ 0.396413] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.397916] iommu: Default domain type: Translated [ 0.397989] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.398339] SCSI subsystem initialized [ 0.398537] usbcore: registered new interface driver usbfs [ 0.398579] usbcore: registered new interface driver hub [ 0.398633] usbcore: registered new device driver usb [ 0.399094] mc: Linux media interface: v0.10 [ 0.399122] videodev: Linux video capture interface: v2.00 [ 0.399586] pps_core: LinuxPPS API ver. 1 registered [ 0.399600] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.399624] PTP clock support registered [ 0.399868] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.400233] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.400325] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.401246] Registered efivars operations [ 0.406505] FPGA manager framework [ 0.406629] Advanced Linux Sound Architecture Driver Initialized. [ 0.407267] Bluetooth: Core ver 2.22 [ 0.407307] NET: Registered protocol family 31 [ 0.407319] Bluetooth: HCI device and connection manager initialized [ 0.407335] Bluetooth: HCI socket layer initialized [ 0.407351] Bluetooth: L2CAP socket layer initialized [ 0.407373] Bluetooth: SCO socket layer initialized [ 0.409116] camchar: rtcpu character device driver loaded [ 0.409908] clocksource: Switched to clocksource arch_sys_counter [ 0.707162] VFS: Disk quotas dquot_6.6.0 [ 0.707244] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.707663] pnp: PnP ACPI: disabled [ 0.720073] la/ptsa driver initialized. [ 0.720199] NET: Registered protocol family 2 [ 0.720388] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.725545] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.725619] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.725943] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.726381] TCP: Hash tables configured (established 65536 bind 65536) [ 0.726513] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.726603] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.726851] NET: Registered protocol family 1 [ 0.727474] RPC: Registered named UNIX socket transport module. [ 0.727489] RPC: Registered udp transport module. [ 0.727500] RPC: Registered tcp transport module. [ 0.727510] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.727532] PCI: CLS 0 bytes, default 64 [ 0.727749] Trying to unpack rootfs image as initramfs... [ 0.926347] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.928396] Freeing initrd memory: 8196K [ 0.932717] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.932767] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.932863] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.933273] kvm [1]: IPA Size Limit: 40 bits [ 0.934009] kvm [1]: vgic interrupt IRQ9 [ 0.934547] kvm [1]: VHE mode initialized successfully [ 0.935993] Initialise system trusted keyrings [ 0.936290] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.940855] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.941556] NFS: Registering the id_resolver key type [ 0.941586] Key type id_resolver registered [ 0.941599] Key type id_legacy registered [ 0.941666] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.941689] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.941724] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.949223] NET: Registered protocol family 38 [ 0.949248] Key type asymmetric registered [ 0.949276] Asymmetric key parser 'x509' registered [ 0.949335] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.949519] io scheduler mq-deadline registered [ 0.949536] io scheduler kyber registered [ 0.954246] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.956448] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.956533] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.956595] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.956653] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.956712] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.960808] scrncapt: init (heads:4 wins:6 planes:4) [ 0.960837] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.961650] EINJ: ACPI disabled. [ 0.964201] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.964224] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 0.964238] tegra-pmc: ### PMC reset level: L1 [ 0.964250] tegra-pmc: ### PMC reset status reg: 0x9 [ 0.964290] tegra-pmc: PMC Prod config success [ 0.968932] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.973165] random: fast init done [ 0.973270] printk: console [ttyTCU0] enabled [ 2.525802] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.530217] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.534702] arm-smmu 10000000.iommu: stage 1 translation [ 2.540366] arm-smmu 10000000.iommu: stage 2 translation [ 2.545772] arm-smmu 10000000.iommu: nested translation [ 2.550851] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.558281] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.569408] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.571406] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.578221] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.586078] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.591004] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.595724] arm-smmu 12000000.iommu: stage 1 translation [ 2.601499] arm-smmu 12000000.iommu: stage 2 translation [ 2.606659] arm-smmu 12000000.iommu: nested translation [ 2.612343] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.619270] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.630358] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.632365] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.639212] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.646484] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.656244] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.659376] tegra_profiler: auth: init [ 2.663902] THERMAL EST: found 3 subdevs [ 2.667053] THERMAL EST num_resources: 0 [ 2.671142] [THERMAL EST subdev 0] [ 2.674466] [THERMAL EST subdev 1] [ 2.677857] [THERMAL EST subdev 2] [ 2.680869] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.687620] THERMAL EST: thz register success. [ 2.691568] THERMAL EST: end of probe, return err: 0 [ 2.697178] nvsciipc: loaded module [ 2.704564] tun: Universal TUN/TAP device driver, 1.6 [ 2.706743] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.712880] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.718452] e1000e: Intel(R) PRO/1000 Network Driver [ 2.723133] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.729204] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.734496] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.740970] PPP generic driver version 2.4.2 [ 2.745224] PPP BSD Compression module registered [ 2.749735] PPP Deflate Compression module registered [ 2.754984] PPP MPPE Compression module registered [ 2.760002] usbcore: registered new interface driver r8152 [ 2.765525] usbcore: registered new interface driver asix [ 2.770587] usbcore: registered new interface driver ax88179_178a [ 2.776958] usbcore: registered new interface driver cdc_ether [ 2.782659] usbcore: registered new interface driver net1080 [ 2.788554] usbcore: registered new interface driver cdc_subset [ 2.794318] usbcore: registered new interface driver zaurus [ 2.800023] usbcore: registered new interface driver cdc_ncm [ 2.805687] usbcore: registered new interface driver aqc111 [ 2.811607] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.817401] ohci-pci: OHCI PCI platform driver [ 2.821985] ohci-platform: OHCI generic platform driver [ 2.827852] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.833787] usbcore: registered new interface driver uas [ 2.837998] usbcore: registered new interface driver usb-storage [ 2.844196] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.850406] mousedev: PS/2 mouse device common for all mice [ 2.855129] usbcore: registered new interface driver xpad [ 2.863516] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.866116] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.873655] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.880280] i2c /dev entries driver [ 2.883828] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.889327] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.894915] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.900344] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.905837] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.911001] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.916408] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.928495] device-mapper: uevent: version 1.0.3 [ 2.928875] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.936652] cpuidle: Initializing cpuidle driver [ 2.940650] sdhci: Secure Digital Host Controller Interface driver [ 2.945735] sdhci: Copyright(c) Pierre Ossman [ 2.949844] Synopsys Designware Multimedia Card Interface Driver [ 2.955753] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.961965] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.962590] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.975030] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.993941] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.002489] vdd-1v0: supplied by regulator-dummy [ 3.007878] vdd-1v8-hs: supplied by regulator-dummy [ 3.012591] vdd-1v8-ls: supplied by regulator-dummy [ 3.017241] vdd-1v8-ao: supplied by regulator-dummy [ 3.020972] vddio-ddr-1v1: supplied by regulator-dummy [ 3.025283] vdd-rtc: supplied by regulator-dummy [ 3.026866] spmic-ldo1: supplied by regulator-dummy [ 3.028008] vdd-ao-3v3: supplied by regulator-dummy [ 3.034044] vddio-emmc-3v3: supplied by regulator-dummy [ 3.040181] spmic-ldo4: supplied by regulator-dummy [ 3.041312] vdd-usb-3v3: supplied by regulator-dummy [ 3.047334] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.053343] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.058735] spmic-ldo8: supplied by vdd-1v8-ls [ 3.060082] gpio-510 (gpio_default): hogged as output/high [ 3.061705] gpio-511 (gpio_default): hogged as output/high [ 3.068576] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.207093] max77686-rtc max77620-rtc: registered as rtc0 [ 3.208060] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.208353] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 3.914537] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.915529] hid: raw HID events driver (C) Jiri Kosina [ 3.916210] usbcore: registered new interface driver usbhid [ 3.916370] usbhid: USB HID core driver [ 3.918120] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.919307] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 26.685830] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.761254] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.234 ms) 墁 4.004625] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.005328] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.006621] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.007452] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.009167] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.009771] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.010404] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.011642] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.012093] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.014158] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.021148] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.027054] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.032112] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.038667] denver_knobs_init:MTS_VERSION:55637613 [ 4.052053] t19x_cache tegra-cache: probed [ 4.054972] optee: probing for conduit method. [ 4.055849] optee: revision 3.16 (65cc2218) [ 4.056838] optee: dynamic shared memory is enabled [ 4.059389] optee: initialized driver [ 4.066346] nvpmodel: initialized successfully [ 4.066892] tegra_hv: get_hvd: not initialized yet [ 4.071873] user_ivc_mempool: hypervisor not present [ 4.077858] usbcore: registered new interface driver snd-usb-audio [ 4.084146] u32 classifier [ 4.085348] input device check on [ 4.089174] Actions configured [ 4.092936] Initializing XFRM netlink socket [ 4.097782] NET: Registered protocol family 10 [ 4.103798] Segment Routing with IPv6 [ 4.104942] NET: Registered protocol family 17 [ 4.109233] NET: Registered protocol family 15 [ 4.113707] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.127277] Bluetooth: RFCOMM socket layer initialized [ 4.132180] Bluetooth: RFCOMM ver 1.11 [ 4.135810] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.142029] Bluetooth: HIDP socket layer initialized [ 4.147354] 9pnet: Installing 9P2000 support [ 4.151335] Key type dns_resolver registered [ 4.156533] registered taskstats version 1 [ 4.159572] Loading compiled-in X.509 certificates [ 4.171283] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.175474] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.185133] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.187736] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.196019] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.204712] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.321989] tegra194-pcie 14160000.pcie: Link up [ 4.324807] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.324999] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.325121] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.325341] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.325499] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.325826] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.326282] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.338537] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.339016] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.339471] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.340870] pci 0004:01:00.0: supports D1 D2 [ 4.341016] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.350566] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.350870] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.351124] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.351470] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.351716] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.351965] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.356658] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.363980] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.372903] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.382847] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.387686] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.392793] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.399620] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.408460] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.410677] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.418937] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.427736] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.534040] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.534692] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.534886] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.535078] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.535277] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.535477] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.535795] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.536180] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.553493] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.554140] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.556332] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.557880] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.559554] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.561233] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.562229] pci 0005:00:00.0: Removing from iommu group 7 [ 5.562470] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.592497] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.614531] host1x 13e10000.host1x: initialized [ 5.616104] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.617015] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.618069] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.618697] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.619602] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.620222] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.621172] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.621741] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.627436] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.634258] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.644032] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.651019] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.661266] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.668257] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.678182] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.685168] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.695026] falcon 15340000.vic: Adding to iommu group 17 [ 5.708884] falcon 15340000.vic: initialized [ 5.710003] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.715279] falcon 15380000.nvjpg: initialized [ 5.715899] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.728288] falcon 154c0000.nvenc: initialized [ 5.728804] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.737887] falcon 15a80000.nvenc1: initialized [ 5.738445] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.749473] nvdec 15480000.nvdec: initialized [ 5.750135] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.759694] nvdec 15140000.nvdec1: initialized [ 5.760250] tsec 15500000.tsec: Adding to iommu group 18 [ 5.765688] tsec 15500000.tsec: initialized [ 5.766246] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.775536] tsec 15100000.tsecb: initialized [ 5.780216] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.813373] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.826381] gpio-374 (wifi-enable): hogged as output/high [ 5.826705] gpio-431 (camera-control-output-low): hogged as output/low [ 5.826958] gpio-432 (camera-control-output-low): hogged as output/low [ 5.828615] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.830246] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.830759] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.832237] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.833302] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.837530] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.842879] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.851170] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.858492] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.869723] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.875125] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.881091] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.889954] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.899382] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.906447] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.914276] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.920256] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.929827] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.936148] pva 16000000.pva0: Adding to iommu group 22 [ 5.963061] pva 16000000.pva0: initialized [ 5.968208] pva 16800000.pva1: Adding to iommu group 23 [ 5.986431] pva 16800000.pva1: initialized [ 5.990468] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.002820] nvdla 15880000.nvdla0: initialized [ 6.004111] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.012360] nvdla 158c0000.nvdla1: initialized [ 6.014572] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.014788] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.015055] tegradccommon 15200000.display-hub: dma mapping done [ 6.016789] tegradc 15200000.display: Adding to iommu group 26 [ 6.023894] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.024201] generic_infoframe_type: 0x87 [ 6.024418] tegradc 15200000.display: DT parsed successfully [ 6.024699] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.026898] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.028751] tegradc 15210000.display: Adding to iommu group 26 [ 6.032658] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.045196] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.050087] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.050720] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.058136] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.064213] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.072207] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.085937] tegra_cec 3960000.tegra_cec: probed [ 6.086204] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.091395] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.096484] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.109092] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.110866] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.126225] kfuse 3830000.kfuse: initialized [ 6.130709] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.131178] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.143766] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.143955] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.150671] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.159246] tegradc 15210000.display: disp0 connected to head1->sor [ 6.163817] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.169357] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.179732] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.185403] tegradc 15210000.display: DT parsed successfully [ 6.191940] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.196806] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.215114] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.220343] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.240353] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.240663] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.243623] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.251546] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.260251] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.266783] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.274338] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.281589] usb usb1: Product: xHCI Host Controller [ 6.286590] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.292857] usb usb1: SerialNumber: 3610000.xhci [ 6.298468] hub 1-0:1.0: USB hub found [ 6.301807] hub 1-0:1.0: 4 ports detected [ 6.306611] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.310827] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.318695] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.326463] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.334106] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.341523] usb usb2: Product: xHCI Host Controller [ 6.346241] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.352502] usb usb2: SerialNumber: 3610000.xhci [ 6.358644] hub 2-0:1.0: USB hub found [ 6.361153] hub 2-0:1.0: 4 ports detected [ 6.403370] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.409058] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.410592] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.410794] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.423939] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.424970] tegra194-cpufreq ccplex: probed with BWMGR [ 6.426265] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.426972] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.427476] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.428881] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.437290] tegra194-vi5 15c10000.vi: initialized [ 6.438645] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.440218] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.441068] generic_infoframe_type: 0x87 [ 6.441103] tegradc 15200000.display: DT parsed successfully [ 6.447564] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.451346] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.451595] mmc0: CQHCI version 5.10 [ 6.457078] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.465920] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.473022] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.476763] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.476773] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.483340] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.486106] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.491915] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.498380] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.506001] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.506524] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.514597] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.521047] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.528669] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.535903] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.543127] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.547910] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.558330] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.560403] ************************************** [ 6.560414] CPU:0, Error:cbb-noc [ 6.578165] Error Logger : 0 [ 6.578180] ErrLog0 : 0x80030000 [ 6.578190] Transaction Type : RD - Read, Incrementing [ 6.585533] nvethernet 2490000.ethernet: Macsec not supported [ 6.593386] Error Code : SLV [ 6.593390] Error Source : Target [ 6.593394] Error Description : Target error detected by CBB slave [ 6.593409] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.652639] Packet header Lock : 0 [ 6.656041] Packet header Len1 : 3 [ 6.659799] NOC protocol version : version >= 2.7 [ 6.664529] ErrLog1 : 0x352428 [ 6.667853] ErrLog2 : 0x0 [ 6.670997] RouteId : 0x352428 [ 6.674409] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.678965] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.683691] TargSubRange : 18 [ 6.686927] SeqId : 0 [ 6.689827] ErrLog3 : 0x4045c [ 6.693231] ErrLog4 : 0x0 [ 6.696388] Address accessed : 0x15b4045c [ 6.700578] ErrLog5 : 0xa09f851 [ 6.703815] Non-Modify : 0x1 [ 6.707485] AXI ID : 0x14 [ 6.710378] Master ID : CCPLEX [ 6.713704] Security Group(GRPSEC): 0x7e [ 6.717905] Cache : 0x1 -- Bufferable [ 6.722360] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.728928] FALCONSEC : 0x0 [ 6.732336] Virtual Queuing Channel(VQC): 0x0 [ 6.736974] ************************************** [ 6.741762] ------------[ cut here ]------------ [ 6.746511] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.753074] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.758068] Modules linked in: [ 6.761055] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 6.767948] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.779960] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.785985] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.790705] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.795684] sp : ffff800010003de0 [ 6.798840] x29: ffff800010003de0 x28: 0000000000000001 [ 6.804523] x27: 0000000000000005 x26: ffffd91d51ef3f58 [ 6.809691] x25: ffffd91d5284ce10 x24: 0000000000000001 [ 6.815372] x23: ffffd91d521e7000 x22: ffffd91d5266ea00 [ 6.820454] x21: 000000000000000f x20: ffff55ea80ea4b80 [ 6.826227] x19: ffffd91d5266ea00 x18: 0000000000000010 [ 6.831391] x17: ffffd91d51f9d008 x16: 00000000bbae2815 [ 6.837000] x15: ffffd91d524e2bf0 x14: 0720072007200720 [ 6.842242] x13: 0720072007200720 x12: 0720072007200720 [ 6.848010] x11: 0720072007200720 x10: 0720072007200720 [ 6.853525] x9 : 0720072007200720 x8 : 07200720072a072a [ 6.859038] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 6.864293] x5 : 0000000000057fa8 x4 : ffffd91d524f7968 [ 6.869727] x3 : 00000000ffffffff x2 : ffffd91d5098e090 [ 6.875310] x1 : ffffd91d524e2680 x0 : 0000000000010001 [ 6.880648] Call trace: [ 6.882844] tegra194_cbb_err_isr+0x190/0x1b0 [ 6.887135] __handle_irq_event_percpu+0x68/0x2a0 [ 6.891939] handle_irq_event_percpu+0x40/0xa0 [ 6.896401] handle_irq_event+0x50/0xf0 [ 6.899907] handle_fasteoi_irq+0xc0/0x170 [ 6.904188] generic_handle_irq+0x40/0x60 [ 6.908212] __handle_domain_irq+0x70/0xd0 [ 6.912157] efi_header_end+0xb0/0xf0 [ 6.915912] el1_irq+0xd0/0x180 [ 6.918889] cpuidle_enter_state+0xb8/0x410 [ 6.923086] cpuidle_enter+0x40/0x60 [ 6.926332] call_cpuidle+0x44/0x80 [ 6.929830] do_idle+0x208/0x270 [ 6.933244] cpu_startup_entry+0x2c/0x70 [ 6.937265] rest_init+0xdc/0xe8 [ 6.940504] arch_call_rest_init+0x18/0x20 [ 6.944701] start_kernel+0x514/0x54c [ 6.947776] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 6.954245] ---[ end trace cb55fab58b12c97b ]--- [ 6.958961] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 6.966487] SMP: stopping secondary CPUs [ 6.970358] Kernel Offset: 0x591d407d0000 from 0xffff800010000000 [ 6.976460] PHYS_OFFSET: 0xffffaa1680000000 [ 6.980322] CPU features: 0x8240002,03802a30 [ 6.984777] Memory Limit: none [ 6.987934] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ? [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 65500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.030] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.337] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.338] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.352] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 觨/T歊lk_early initialized 覝: N滵ail_early initialized 鄤n殞use initialized hwwdt initialized ?sec漮194_ec_get_ec_list: found 45 ecs 酳re externa歋c initialized 鄟潎mon_setup_monitors: found 3 monitors vmon initialized ?DT榥dc initialized fmon_populate_monitors: found 73 monitors ?found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug歊lk_dt_late initialized ?滱oc_late initialized ?漥m_post initialized dbells initialized ? 0歍mce initialized cvc initialized ?:23:20 UTC 2榥vfs_clk_mach_post initialized ?22 榥vfs_clk_platform_post initialized 跾ar歊vc_late initialized regulator_post initialized 踄h64漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized ? I/TC: WARNING漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ? This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.205] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.614] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.621] E> invalid display type [0003.622] E> cannot find any other nvdisp nodes [0003.639] I> edid read success [0003.651] I> edid read success [0003.652] I> width = 640, height = 480, frequency = 25174825 [0003.652] I> width = 1920, height = 1080, frequency = 148500000 [0003.653] I> width = 1280, height = 768, frequency = 79500000 [0003.653] I> width = 1360, height = 768, frequency = 85500000 [0003.653] I> width = 720, height = 480, frequency = 26973026 [0003.657] I> width = 720, height = 576, frequency = 26973026 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.686] I> width = 720, height = 480, frequency = 26973026 [0003.691] I> width = 720, height = 576, frequency = 26973026 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 4096, height = 2160, frequency = 296703296 [0003.726] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.737] I> hdmi_enable, starting HDMI initialisation [0003.741] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.752] calling apps_init() [0003.752] starting app kernel_boot_app [0003.753] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... 觨/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000704] Console: colour dummy device 80x25 [ 0.002250] printk: console [tty0] enabled [ 0.002314] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002349] pid_max: default: 32768 minimum: 301 [ 0.002553] LSM: Security Framework initializing [ 0.002633] Yama: becoming mindful. [ 0.002675] SELinux: Initializing. [ 0.002851] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002897] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006124] rcu: Hierarchical SRCU implementation. [ 0.006409] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007248] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007294] DTB Build time: Aug 10 2022 20:31:49 [ 0.010218] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010504] Remapping and enabling EFI services. [ 0.012533] smp: Bringing up secondary CPUs ... [ 0.041645] Detected PIPT I-cache on CPU1 [ 0.041763] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073336] Detected PIPT I-cache on CPU2 [ 0.073486] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103047] Detected PIPT I-cache on CPU3 [ 0.103191] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132949] Detected PIPT I-cache on CPU4 [ 0.133061] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162718] Detected PIPT I-cache on CPU5 [ 0.162865] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164285] smp: Brought up 1 node, 6 CPUs [ 0.164502] SMP: Total of 6 processors activated. [ 0.164572] CPU features: detected: Privileged Access Never [ 0.164595] CPU features: detected: LSE atomic instructions [ 0.164608] CPU features: detected: User Access Override [ 0.164622] CPU features: detected: 32-bit EL0 Support [ 0.164637] CPU features: detected: RAS Extension Support [ 0.164650] CPU features: detected: CRC32 instructions [ 0.164662] CPU features: detected: 32-bit EL1 Support [ 0.234691] CPU: All CPU(s) started at EL2 [ 0.240568] devtmpfs: initialized [ 0.287716] Registered cp15_barrier emulation handler [ 0.287811] Registered setend emulation handler [ 0.287831] KASLR enabled [ 0.288062] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288109] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289490] pinctrl core: initialized pinctrl subsystem [ 0.290559] SMBIOS 3.0.0 present. [ 0.290599] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291250] NET: Registered protocol family 16 [ 0.293389] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293953] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294652] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294714] audit: initializing netlink subsys (disabled) [ 0.295083] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.295570] thermal_sys: Registered thermal governor 'step_wise' [ 0.295576] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295592] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299238] cpuidle: using governor menu [ 0.299807] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300286] ASID allocator initialised with 32768 entries [ 0.300554] Serial: AMBA PL011 UART driver [ 0.304154] Tegra reboot handler registered. [ 0.378944] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.379088] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.379276] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.379325] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.379446] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.379492] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.379621] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.379684] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.379817] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.379865] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.382080] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.382114] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.382141] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.382168] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.382196] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.382222] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.382248] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.382274] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.382336] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.382365] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.382419] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.382446] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.382488] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.382514] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.382556] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.382583] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.382609] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.382714] mc-err: mcerr ops are set to t19x [ 0.395384] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.395406] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.395418] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.395429] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.401968] ACPI: Interpreter disabled. [ 0.403155] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.404433] iommu: Default domain type: Translated [ 0.404501] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.404876] SCSI subsystem initialized [ 0.405043] usbcore: registered new interface driver usbfs [ 0.405089] usbcore: registered new interface driver hub [ 0.405128] usbcore: registered new device driver usb [ 0.405556] mc: Linux media interface: v0.10 [ 0.405592] videodev: Linux video capture interface: v2.00 [ 0.405895] pps_core: LinuxPPS API ver. 1 registered [ 0.405908] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.405930] PTP clock support registered [ 0.406159] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.406597] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.406689] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.407288] Registered efivars operations [ 0.413739] FPGA manager framework [ 0.413848] Advanced Linux Sound Architecture Driver Initialized. [ 0.414478] Bluetooth: Core ver 2.22 [ 0.414556] NET: Registered protocol family 31 [ 0.414570] Bluetooth: HCI device and connection manager initialized [ 0.414588] Bluetooth: HCI socket layer initialized [ 0.414606] Bluetooth: L2CAP socket layer initialized [ 0.414636] Bluetooth: SCO socket layer initialized [ 0.417227] camchar: rtcpu character device driver loaded [ 0.418416] clocksource: Switched to clocksource arch_sys_counter [ 0.826058] VFS: Disk quotas dquot_6.6.0 [ 0.826188] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.826626] pnp: PnP ACPI: disabled [ 0.840275] la/ptsa driver initialized. [ 0.840481] NET: Registered protocol family 2 [ 0.840671] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.848408] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.848534] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.848887] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.849513] TCP: Hash tables configured (established 65536 bind 65536) [ 0.849691] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.849851] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.850155] NET: Registered protocol family 1 [ 0.851267] RPC: Registered named UNIX socket transport module. [ 0.851301] RPC: Registered udp transport module. [ 0.851322] RPC: Registered tcp transport module. [ 0.851349] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.851398] PCI: CLS 0 bytes, default 64 [ 0.851668] Trying to unpack rootfs image as initramfs... [ 1.120837] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.124136] Freeing initrd memory: 8196K [ 1.128595] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.128631] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.128668] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.128996] kvm [1]: IPA Size Limit: 40 bits [ 1.129535] kvm [1]: vgic interrupt IRQ9 [ 1.130113] kvm [1]: VHE mode initialized successfully [ 1.131767] Initialise system trusted keyrings [ 1.132114] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.138662] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.139495] NFS: Registering the id_resolver key type [ 1.139533] Key type id_resolver registered [ 1.139550] Key type id_legacy registered [ 1.139668] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.139696] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.139740] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.149505] NET: Registered protocol family 38 [ 1.149530] Key type asymmetric registered [ 1.149548] Asymmetric key parser 'x509' registered [ 1.149602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.149840] io scheduler mq-deadline registered [ 1.149867] io scheduler kyber registered [ 1.156187] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.159318] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.159431] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.159540] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.159622] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.159698] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.164997] scrncapt: init (heads:4 wins:6 planes:4) [ 1.165351] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.166337] EINJ: ACPI disabled. [ 1.169679] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.169708] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.169726] tegra-pmc: ### PMC reset level: L1 [ 1.169741] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.169798] tegra-pmc: PMC Prod config success [ 1.175045] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.211625] random: fast init done [ 1.214864] printk: console [ttyTCU0] enabled [ 2.732392] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.736787] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.741573] arm-smmu 10000000.iommu: stage 1 translation [ 2.747194] arm-smmu 10000000.iommu: stage 2 translation [ 2.752466] arm-smmu 10000000.iommu: nested translation [ 2.757699] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.765140] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.774402] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.778503] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.785080] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.792395] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.798110] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.802845] arm-smmu 12000000.iommu: stage 1 translation [ 2.808108] arm-smmu 12000000.iommu: stage 2 translation [ 2.813504] arm-smmu 12000000.iommu: nested translation [ 2.819190] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.826367] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.835429] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.839244] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.846048] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.853178] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.863215] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.866419] tegra_profiler: auth: init [ 2.870636] THERMAL EST: found 3 subdevs [ 2.873867] THERMAL EST num_resources: 0 [ 2.877992] [THERMAL EST subdev 0] [ 2.881053] [THERMAL EST subdev 1] [ 2.884722] [THERMAL EST subdev 2] [ 2.887712] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.894112] THERMAL EST: thz register success. [ 2.898661] THERMAL EST: end of probe, return err: 0 [ 2.903861] nvsciipc: loaded module [ 2.909916] tun: Universal TUN/TAP device driver, 1.6 [ 2.913324] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.919488] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.925024] e1000e: Intel(R) PRO/1000 Network Driver [ 2.930224] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.936303] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.941595] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.947656] PPP generic driver version 2.4.2 [ 2.951726] PPP BSD Compression module registered [ 2.956574] PPP Deflate Compression module registered [ 2.961587] PPP MPPE Compression module registered [ 2.966600] usbcore: registered new interface driver r8152 [ 2.972341] usbcore: registered new interface driver asix [ 2.977669] usbcore: registered new interface driver ax88179_178a [ 2.983532] usbcore: registered new interface driver cdc_ether [ 2.989745] usbcore: registered new interface driver net1080 [ 2.995356] usbcore: registered new interface driver cdc_subset [ 3.001124] usbcore: registered new interface driver zaurus [ 3.006835] usbcore: registered new interface driver cdc_ncm [ 3.012495] usbcore: registered new interface driver aqc111 [ 3.018125] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.024510] ohci-pci: OHCI PCI platform driver [ 3.028805] ohci-platform: OHCI generic platform driver [ 3.034206] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.040412] usbcore: registered new interface driver uas [ 3.044824] usbcore: registered new interface driver usb-storage [ 3.050876] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.057074] mousedev: PS/2 mouse device common for all mice [ 3.061988] usbcore: registered new interface driver xpad [ 3.069685] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.072980] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.080758] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.087172] i2c /dev entries driver [ 3.090332] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.096289] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.101704] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.107084] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.112435] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.117970] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.123119] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.135748] device-mapper: uevent: version 1.0.3 [ 3.136131] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.143321] cpuidle: Initializing cpuidle driver [ 3.147541] sdhci: Secure Digital Host Controller Interface driver [ 3.152603] sdhci: Copyright(c) Pierre Ossman [ 3.156677] Synopsys Designware Multimedia Card Interface Driver [ 3.162568] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.168782] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.169276] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.181899] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.200009] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.208712] vdd-1v0: supplied by regulator-dummy [ 3.214177] vdd-1v8-hs: supplied by regulator-dummy [ 3.218917] vdd-1v8-ls: supplied by regulator-dummy [ 3.223612] vdd-1v8-ao: supplied by regulator-dummy [ 3.227446] vddio-ddr-1v1: supplied by regulator-dummy [ 3.231756] vdd-rtc: supplied by regulator-dummy [ 3.233347] spmic-ldo1: supplied by regulator-dummy [ 3.234482] vdd-ao-3v3: supplied by regulator-dummy [ 3.240550] vddio-emmc-3v3: supplied by regulator-dummy [ 3.246599] spmic-ldo4: supplied by regulator-dummy [ 3.247718] vdd-usb-3v3: supplied by regulator-dummy [ 3.253728] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.259759] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.265089] spmic-ldo8: supplied by vdd-1v8-ls [ 3.266434] gpio-510 (gpio_default): hogged as output/high [ 3.268552] gpio-511 (gpio_default): hogged as output/high [ 3.275750] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.413991] max77686-rtc max77620-rtc: registered as rtc0 [ 3.415173] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.415462] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 4.110545] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.111497] hid: raw HID events driver (C) Jiri Kosina [ 4.112147] usbcore: registered new interface driver usbhid [ 4.112300] usbhid: USB HID core driver [ 4.113872] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.115009] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 27.184283] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.260080] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.607 ms) 墁 4.200265] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.200727] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.201422] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.202094] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.203570] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.204136] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.204665] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.205716] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.206083] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.207952] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.217276] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.223449] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.227912] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.233913] denver_knobs_init:MTS_VERSION:55637613 [ 4.246691] t19x_cache tegra-cache: probed [ 4.251091] optee: probing for conduit method. [ 4.251976] optee: revision 3.16 (65cc2218) [ 4.253185] optee: dynamic shared memory is enabled [ 4.255380] optee: initialized driver [ 4.261515] nvpmodel: initialized successfully [ 4.262960] tegra_hv: get_hvd: not initialized yet [ 4.267551] user_ivc_mempool: hypervisor not present [ 4.273737] usbcore: registered new interface driver snd-usb-audio [ 4.280214] u32 classifier [ 4.281577] input device check on [ 4.285292] Actions configured [ 4.288766] Initializing XFRM netlink socket [ 4.293547] NET: Registered protocol family 10 [ 4.300363] Segment Routing with IPv6 [ 4.300918] NET: Registered protocol family 17 [ 4.305529] NET: Registered protocol family 15 [ 4.309620] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.323348] Bluetooth: RFCOMM socket layer initialized [ 4.328115] Bluetooth: RFCOMM ver 1.11 [ 4.331773] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.337888] Bluetooth: HIDP socket layer initialized [ 4.343344] 9pnet: Installing 9P2000 support [ 4.347385] Key type dns_resolver registered [ 4.352397] registered taskstats version 1 [ 4.355497] Loading compiled-in X.509 certificates [ 4.368186] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.371335] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.381408] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.383769] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.392277] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.400680] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.518580] tegra194-pcie 14160000.pcie: Link up [ 4.521852] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.522120] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.522272] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.522642] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.522852] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.523234] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.523712] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.535680] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.536144] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.536587] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.538237] pci 0004:01:00.0: supports D1 D2 [ 4.538366] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.551321] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.551745] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.552040] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.552420] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.552780] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.553020] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.553227] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.560682] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.569328] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.579980] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.584489] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.590046] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.597223] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.606276] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.607069] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.615740] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.624186] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.738979] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.739823] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.740032] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.740220] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.740468] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.740706] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.741070] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.741504] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.756490] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.756801] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.758773] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.760037] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.761648] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.763120] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.763977] pci 0005:00:00.0: Removing from iommu group 7 [ 5.764222] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.793002] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.815034] host1x 13e10000.host1x: initialized [ 5.816372] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.817253] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.818112] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.818866] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.819628] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.820312] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.821013] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.822172] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.832263] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.838872] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.848852] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.856149] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.866219] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.873174] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.883163] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.889865] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.899763] falcon 15340000.vic: Adding to iommu group 17 [ 5.913937] falcon 15340000.vic: initialized [ 5.914970] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.920819] falcon 15380000.nvjpg: initialized [ 5.921370] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.933509] falcon 154c0000.nvenc: initialized [ 5.934045] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.943083] falcon 15a80000.nvenc1: initialized [ 5.943669] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.955717] nvdec 15480000.nvdec: initialized [ 5.956340] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.966263] nvdec 15140000.nvdec1: initialized [ 5.966982] tsec 15500000.tsec: Adding to iommu group 18 [ 5.973247] tsec 15500000.tsec: initialized [ 5.973950] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.980581] tsec 15100000.tsecb: initialized [ 5.984553] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.009331] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.020490] gpio-374 (wifi-enable): hogged as output/high [ 6.020824] gpio-431 (camera-control-output-low): hogged as output/low [ 6.021079] gpio-432 (camera-control-output-low): hogged as output/low [ 6.022604] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.023860] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.024358] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.031263] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.036769] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.042548] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.048086] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.055913] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.063453] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.075059] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.080074] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.085977] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.095136] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.104297] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.111208] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.118962] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.125426] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.135263] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.141179] pva 16000000.pva0: Adding to iommu group 22 [ 6.166897] pva 16000000.pva0: initialized [ 6.171500] pva 16800000.pva1: Adding to iommu group 23 [ 6.182679] pva 16800000.pva1: initialized [ 6.186834] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.198914] nvdla 15880000.nvdla0: initialized [ 6.200145] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.215885] nvdla 158c0000.nvdla1: initialized [ 6.217914] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.218194] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.218623] tegradccommon 15200000.display-hub: dma mapping done [ 6.220190] tegradc 15200000.display: Adding to iommu group 26 [ 6.227427] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.227852] generic_infoframe_type: 0x87 [ 6.228070] tegradc 15200000.display: DT parsed successfully [ 6.228446] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.231193] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.232331] tegradc 15210000.display: Adding to iommu group 26 [ 6.237241] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.245352] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.249259] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.257120] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.263883] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.271286] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.277669] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.286659] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.291078] tegra_cec 3960000.tegra_cec: probed [ 6.296634] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.298245] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.302247] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.313109] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.320229] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.324274] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.331273] kfuse 3830000.kfuse: initialized [ 6.339896] tegradc 15210000.display: disp0 connected to head1->sor [ 6.345246] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.349400] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.355416] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.356100] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.362110] tegradc 15210000.display: DT parsed successfully [ 6.381635] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.387322] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.397659] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.410587] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.419869] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.425433] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.445206] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.445565] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.448284] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.456753] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.465111] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.471922] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.479381] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.486539] usb usb1: Product: xHCI Host Controller [ 6.491500] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.497779] usb usb1: SerialNumber: 3610000.xhci [ 6.503553] hub 1-0:1.0: USB hub found [ 6.506319] hub 1-0:1.0: 4 ports detected [ 6.510989] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.516012] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.523628] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.531213] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.539211] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.546431] usb usb2: Product: xHCI Host Controller [ 6.551143] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.557614] usb usb2: SerialNumber: 3610000.xhci [ 6.563055] hub 2-0:1.0: USB hub found [ 6.566037] hub 2-0:1.0: 4 ports detected [ 6.604456] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.609662] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.611126] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.611309] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.624260] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.625357] tegra194-cpufreq ccplex: probed with BWMGR [ 6.626522] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.627148] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.627559] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.628794] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.637966] mmc0: CQHCI version 5.10 [ 6.642474] tegra194-vi5 15c10000.vi: initialized [ 6.644873] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.646128] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.649682] generic_infoframe_type: 0x87 [ 6.649737] tegradc 15200000.display: DT parsed successfully [ 6.656468] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.659868] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.665850] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.665860] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.665864] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.665868] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.708786] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.709402] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.714535] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.722425] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.722628] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.729117] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.737687] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.738059] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.746631] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.752319] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.766660] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.781049] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.790445] nvethernet 2490000.ethernet: Macsec not supported [ 6.791810] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.797996] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.798579] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.808977] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.808981] ************************************** [ 6.808983] CPU:0, Error:cbb-noc [ 6.808986] Error Logger : 0 [ 6.808994] ErrLog0 : 0x80030000 [ 6.808997] Transaction Type : RD - Read, Incrementing [ 6.809000] Error Code : SLV [ 6.809022] Error Source : Target [ 6.809025] Error Description : Target error detected by CBB slave [ 6.809034] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.809049] Packet header Lock : 0 [ 6.810140] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.810261] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.810428] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.811612] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.901731] Packet header Len1 : 3 [ 6.905229] NOC protocol version : version >= 2.7 [ 6.910127] ErrLog1 : 0x352420 [ 6.913107] ErrLog2 : 0x0 [ 6.915994] RouteId : 0x352420 [ 6.919664] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.924221] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.929208] TargSubRange : 18 [ 6.932788] SeqId : 0 [ 6.935677] ErrLog3 : 0x4045c [ 6.938831] ErrLog4 : 0x0 [ 6.941978] Address accessed : 0x15b4045c [ 6.946439] ErrLog5 : 0x809f851 [ 6.949852] Non-Modify : 0x1 [ 6.953266] AXI ID : 0x10 [ 6.956328] Master ID : CCPLEX [ 6.959481] Security Group(GRPSEC): 0x7e [ 6.963612] Cache : 0x1 -- Bufferable [ 6.967619] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.974445] FALCONSEC : 0x0 [ 6.977594] Virtual Queuing Channel(VQC): 0x0 [ 6.982507] ************************************** [ 6.987527] ------------[ cut here ]------------ [ 6.991771] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.998335] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.003591] Modules linked in: [ 7.006818] CPU: 0 PID: 7 Comm: kworker/u12:0 Not tainted 5.10.104-tegra #1 [ 7.013727] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.025751] Workqueue: events_unbound async_run_entry_fn [ 7.031493] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.037548] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.042255] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.046719] sp : ffff800010003b30 [ 7.050302] x29: ffff800010003b30 x28: 0000000000000001 [ 7.055727] x27: 0000000000000005 x26: ffffab2e63f13f58 [ 7.060894] x25: ffffab2e6486ce10 x24: 0000000000000001 [ 7.066233] x23: ffffab2e64207000 x22: ffffab2e6468ea00 [ 7.072002] x21: 000000000000000f x20: ffff5e7300ea6c80 [ 7.077427] x19: ffffab2e6468ea00 x18: 0000000000000010 [ 7.082853] x17: 0000000000000007 x16: 00000000a8cb9401 [ 7.088107] x15: ffff5e73001630f0 x14: 0720072007200720 [ 7.093877] x13: 0720072007200720 x12: 0720072007200720 [ 7.099216] x11: 0720072007200720 x10: 0720072007200720 [ 7.104471] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.110241] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.115752] x5 : 0000000000057fa8 x4 : ffffab2e64517968 [ 7.121194] x3 : 00000000ffffffff x2 : ffffab2e629ae090 [ 7.126259] x1 : ffff5e7300162b80 x0 : 0000000100010100 [ 7.131851] Call trace: [ 7.134305] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.138596] __handle_irq_event_percpu+0x68/0x2a0 [ 7.143159] handle_irq_event_percpu+0x40/0xa0 [ 7.147347] handle_irq_event+0x50/0xf0 [ 7.151385] handle_fasteoi_irq+0xc0/0x170 [ 7.155137] generic_handle_irq+0x40/0x60 [ 7.159417] __handle_domain_irq+0x70/0xd0 [ 7.163631] efi_header_end+0xb0/0xf0 [ 7.167116] el1_irq+0xd0/0x180 [ 7.170090] __do_softirq+0xb4/0x3e8 [ 7.173512] irq_exit+0xc0/0xe0 [ 7.176741] __handle_domain_irq+0x74/0xd0 [ 7.180767] efi_header_end+0xb0/0xf0 [ 7.184441] el1_irq+0xd0/0x180 [ 7.187420] tegra_hda_get_dev_id+0x6c/0x2b0 [ 7.191719] tegra_hda_init+0x234/0x440 [ 7.195642] tegra_dc_hdmi_init+0x820/0xb50 [ 7.199237] tegra_dc_set_out+0x2cc/0x480 [ 7.203347] tegra_dc_probe+0xa90/0x1570 [ 7.207286] platform_drv_probe+0x5c/0xb0 [ 7.211744] really_probe+0xf8/0x3d0 [ 7.215159] driver_probe_device+0x60/0xc0 [ 7.219530] __device_attach_driver+0x8c/0xd0 [ 7.223921] bus_for_each_drv+0x8c/0xe0 [ 7.227667] __device_attach_async_helper+0xc4/0xf0 [ 7.232584] async_run_entry_fn+0x4c/0x150 [ 7.236768] process_one_work+0x1c4/0x4a0 [ 7.240620] worker_thread+0x54/0x430 [ 7.244312] kthread+0x148/0x170 [ 7.247880] ret_from_fork+0x10/0x24 [ 7.251303] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.257702] ---[ end trace 1806d885ede6cc1f ]--- [ 7.262315] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.269495] SMP: stopping secondary CPUs [ 7.273713] Kernel Offset: 0x2b2e527f0000 from 0xffff800010000000 [ 7.279814] PHYS_OFFSET: 0xffffa18e00000000 [ 7.283930] CPU features: 0x8240002,03802a30 [ 7.288043] Memory Limit: none [ 7.291383] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ? [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 65000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.030] > DEVICE_PROD: device prod is not initialized. [0002.335] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.336] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.337] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.337] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.338] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.338] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.352] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.355] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 觨歊lk_early initialized ?TC: 滵ail_early initialized 誏殞use initialized hwwdt initialized 鄤n-se漮194_ec_get_ec_list: found 45 ecs 踄ure extern歋c initialized vmon_setup_monitors: found 3 monitors vmon initialized 跾l 榥dc initialized 覡殞mon_populate_monitors: found 73 monitors 賏 found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Au歊lk_dt_late initialized noc_late initialized 輍漥m_post initialized dbells initialized ?11歍mce initialized ?歊vc initialized ?3:23:20 UTC榥vfs_clk_mach_post initialized ?2022榥vfs_clk_platform_post initialized ?a歊vc_late initialized regulator_post initialized 跾rch漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized ?4 I/TC: WARNIN漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] 觩: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.473] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.477] I> fixed regulator driver initialized [0003.494] I> register 'maxim' power off handle [0003.498] I> virtual i2c enabled [0003.498] I> registered 'maxim,max20024' pmic [0003.499] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.499] I> Boot-device: QSPI [0003.500] I> Boot_device: QSPI_FLASH instance: 0 [0003.500] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.610] W> set volts not configured for 'vdd-1v0' [0003.617] W> set volts not configured for 'vdd-1v8-hs' [0003.617] I> retrieved tmds range from prod_list_hdmi_soc [0003.625] E> invalid display type [0003.626] E> cannot find any other nvdisp nodes [0003.643] I> edid read success [0003.656] I> edid read success [0003.656] I> width = 640, height = 480, frequency = 25174825 [0003.656] I> width = 1920, height = 1080, frequency = 148500000 [0003.657] I> width = 1280, height = 768, frequency = 79500000 [0003.657] I> width = 1360, height = 768, frequency = 85500000 [0003.658] I> width = 720, height = 480, frequency = 26973026 [0003.662] I> width = 720, height = 576, frequency = 26973026 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1280, height = 720, frequency = 74175824 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 1920, height = 1080, frequency = 148351648 [0003.690] I> width = 720, height = 480, frequency = 26973026 [0003.695] I> width = 720, height = 576, frequency = 26973026 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 3840, height = 2160, frequency = 296703296 [0003.724] I> width = 4096, height = 2160, frequency = 296703296 [0003.730] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.741] I> hdmi_enable, starting HDMI initialisation [0003.746] I> hdmi_enable, HDMI initialisation complete [0003.756] initializing target [0003.756] calling apps_init() [0003.757] starting app kernel_boot_app [0003.758] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting Recovery Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] printk: bootconsole [tegra_comb_uart0] enabled [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x259441018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x259444f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/initrd rw rootwait console=ttyTCU0,115200n8 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6929316K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 479000K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008679] Console: colour dummy device 80x25 [ 0.012382] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022503] pid_max: default: 32768 minimum: 301 [ 0.027243] LSM: Security Framework initializing [ 0.031820] Yama: becoming mindful. [ 0.035463] SELinux: Initializing. [ 0.039202] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.046662] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.057526] rcu: Hierarchical SRCU implementation. [ 0.059762] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.067943] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.085020] DTB Build time: Aug 10 2022 20:31:49 [ 0.092184] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.096580] Remapping and enabling EFI services. [ 0.102626] smp: Bringing up secondary CPUs ... ? Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.198641] Detected PIPT I-cache on CPU1 [ 0.198754] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.234151] Detected PIPT I-cache on CPU2 [ 0.234305] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.263887] Detected PIPT I-cache on CPU3 [ 0.264016] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.293683] Detected PIPT I-cache on CPU4 [ 0.293898] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.323560] Detected PIPT I-cache on CPU5 [ 0.323727] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.324080] smp: Brought up 1 node, 6 CPUs [ 0.325098] SMP: Total of 6 processors activated. [ 0.325262] CPU features: detected: Privileged Access Never [ 0.325366] CPU features: detected: LSE atomic instructions [ 0.325459] CPU features: detected: User Access Override [ 0.325839] CPU features: detected: 32-bit EL0 Support [ 0.326227] CPU features: detected: RAS Extension Support [ 0.326676] CPU features: detected: CRC32 instructions [ 0.327372] CPU features: detected: 32-bit EL1 Support [ 0.401474] CPU: All CPU(s) started at EL2 [ 0.407319] devtmpfs: initialized [ 0.453559] Registered cp15_barrier emulation handler [ 0.453786] Registered setend emulation handler [ 0.453881] KASLR enabled [ 0.454201] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.454364] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.455422] pinctrl core: initialized pinctrl subsystem [ 0.456474] SMBIOS 3.0.0 present. [ 0.456587] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.457452] NET: Registered protocol family 16 [ 0.459418] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.460062] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.460867] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.461080] audit: initializing netlink subsys (disabled) [ 0.461428] audit: type=2000 audit(0.408:1): state=initialized audit_enabled=0 res=1 [ 0.461872] thermal_sys: Registered thermal governor 'step_wise' [ 0.461878] thermal_sys: Registered thermal governor 'power_allocator' [ 0.461995] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.466925] cpuidle: using governor menu [ 0.475492] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.482404] ASID allocator initialised with 32768 entries [ 0.487695] Serial: AMBA PL011 UART driver [ 0.494756] Tegra reboot handler registered. [ 0.571394] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.571596] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.571871] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.572030] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.572294] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.572481] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.572745] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.572890] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.573158] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.573337] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.575725] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.575867] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.577536] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.584272] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.590740] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.597320] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.603611] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.610174] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.616665] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.623384] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.629855] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.636344] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.642720] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.648852] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.655493] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.661880] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.668270] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.674724] mc-err: mcerr ops are set to t19x [ 0.691424] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.691586] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.692208] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.698906] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.712184] ACPI: Interpreter disabled. [ 0.713429] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.715266] iommu: Default domain type: Translated [ 0.718895] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.725196] SCSI subsystem initialized [ 0.728884] usbcore: registered new interface driver usbfs [ 0.734092] usbcore: registered new interface driver hub [ 0.739611] usbcore: registered new device driver usb [ 0.745057] mc: Linux media interface: v0.10 [ 0.749031] videodev: Linux video capture interface: v2.00 [ 0.754723] pps_core: LinuxPPS API ver. 1 registered [ 0.759335] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.768465] PTP clock support registered [ 0.772501] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.779332] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.786278] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.793106] Registered efivars operations [ 0.801424] FPGA manager framework [ 0.801601] Advanced Linux Sound Architecture Driver Initialized. [ 0.806772] Bluetooth: Core ver 2.22 [ 0.809850] NET: Registered protocol family 31 [ 0.814117] Bluetooth: HCI device and connection manager initialized [ 0.820244] Bluetooth: HCI socket layer initialized [ 0.825508] Bluetooth: L2CAP socket layer initialized [ 0.830746] Bluetooth: SCO socket layer initialized [ 0.837081] camchar: rtcpu character device driver loaded [ 0.842642] clocksource: Switched to clocksource arch_sys_counter [ 1.133995] VFS: Disk quotas dquot_6.6.0 [ 1.134134] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.134596] pnp: PnP ACPI: disabled [ 1.144524] la/ptsa driver initialized. [ 1.144732] NET: Registered protocol family 2 [ 1.144964] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.150788] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.151050] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.151431] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.151988] TCP: Hash tables configured (established 65536 bind 65536) [ 1.152267] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.152501] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.152865] NET: Registered protocol family 1 [ 1.154033] RPC: Registered named UNIX socket transport module. [ 1.154185] RPC: Registered udp transport module. [ 1.154283] RPC: Registered tcp transport module. [ 1.154380] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.154536] PCI: CLS 0 bytes, default 64 [ 1.154897] Trying to unpack rootfs image as initramfs... [ 1.550347] Freeing initrd memory: 11876K [ 1.554631] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.554789] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.554922] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.555348] kvm [1]: IPA Size Limit: 40 bits [ 1.555971] kvm [1]: vgic interrupt IRQ9 [ 1.556552] kvm [1]: VHE mode initialized successfully [ 1.558097] Initialise system trusted keyrings [ 1.558491] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.564236] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.565130] NFS: Registering the id_resolver key type [ 1.565252] Key type id_resolver registered [ 1.565352] Key type id_legacy registered [ 1.565517] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.565758] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.565920] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.575662] NET: Registered protocol family 38 [ 1.575773] Key type asymmetric registered [ 1.575888] Asymmetric key parser 'x509' registered [ 1.576054] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.576448] io scheduler mq-deadline registered [ 1.576572] io scheduler kyber registered [ 1.582354] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.585296] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.586655] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.592486] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.598252] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.603931] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.614860] scrncapt: init (heads:4 wins:6 planes:4) [ 1.614969] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.616083] EINJ: ACPI disabled. [ 1.627700] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.631531] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.636420] tegra-pmc: ### PMC reset level: L1 [ 1.640707] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.645726] tegra-pmc: PMC Prod config success [ 1.654808] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.658875] printk: console [ttyTCU0] enabled [ 1.658875] printk: console [ttyTCU0] enabled 1.664445] printk: bootconsole [tegra_comb_uart0] disabled [ 1.664445] printk: bootconsole [tegra_comb_uart0] disabled [ 1.676729] arm-smmu 10000000.iommu: probing hardware configuration... [ 1.682218] arm-smmu 10000000.iommu: SMMUv2 with: [ 1.686985] arm-smmu 10000000.iommu: stage 1 translation [ 1.692600] arm-smmu 10000000.iommu: stage 2 translation [ 1.697870] arm-smmu 10000000.iommu: nested translation [ 1.703366] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 1.710712] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 1.720131] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 1.723885] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.730592] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.737711] arm-smmu 12000000.iommu: probing hardware configuration... [ 1.743004] arm-smmu 12000000.iommu: SMMUv2 with: [ 1.747728] arm-smmu 12000000.iommu: stage 1 translation [ 1.753505] arm-smmu 12000000.iommu: stage 2 translation [ 1.758690] arm-smmu 12000000.iommu: nested translation [ 1.764353] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 1.771270] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 1.780865] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 1.784420] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.791216] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.798290] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 1.808214] tegra_profiler: version: 1.147, samples/io: 49/28 [ 1.811334] tegra_profiler: auth: init [ 1.815872] THERMAL EST: found 3 subdevs [ 1.819057] THERMAL EST num_resources: 0 [ 1.823150] [THERMAL EST subdev 0] [ 1.826215] [THERMAL EST subdev 1] [ 1.829882] [THERMAL EST subdev 2] [ 1.832890] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.839329] THERMAL EST: thz register success. [ 1.843579] THERMAL EST: end of probe, return err: 0 [ 1.848799] nvsciipc: loaded module [ 1.855039] tun: Universal TUN/TAP device driver, 1.6 [ 1.858424] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 1.864639] hns3: Copyright (c) 2017 Huawei Corporation. [ 1.870476] e1000e: Intel(R) PRO/1000 Network Driver [ 1.875384] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.881471] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.886758] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.892641] PPP generic driver version 2.4.2 [ 1.897136] PPP BSD Compression module registered [ 1.901727] PPP Deflate Compression module registered [ 1.906976] PPP MPPE Compression module registered [ 1.912009] usbcore: registered new interface driver r8152 [ 1.917500] usbcore: registered new interface driver asix [ 1.922832] usbcore: registered new interface driver ax88179_178a [ 1.928959] usbcore: registered new interface driver cdc_ether [ 1.934949] usbcore: registered new interface driver net1080 [ 1.940258] usbcore: registered new interface driver cdc_subset [ 1.946553] usbcore: registered new interface driver zaurus [ 1.951995] usbcore: registered new interface driver cdc_ncm [ 1.957671] usbcore: registered new interface driver aqc111 [ 1.963611] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.969389] ohci-pci: OHCI PCI platform driver [ 1.973942] ohci-platform: OHCI generic platform driver [ 1.979379] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 1.985632] usbcore: registered new interface driver uas [ 1.990216] usbcore: registered new interface driver usb-storage [ 1.996303] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.001987] mousedev: PS/2 mouse device common for all mice [ 2.007376] usbcore: registered new interface driver xpad [ 2.014787] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.018144] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:24 UTC (24) [ 2.025653] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.032166] i2c /dev entries driver [ 2.035776] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.041182] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.046620] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.052288] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.057551] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.063073] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.068493] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.080069] device-mapper: uevent: version 1.0.3 [ 2.080403] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.088509] cpuidle: Initializing cpuidle driver [ 2.092663] sdhci: Secure Digital Host Controller Interface driver [ 2.097736] sdhci: Copyright(c) Pierre Ossman [ 2.101574] Synopsys Designware Multimedia Card Interface Driver [ 2.107734] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.113696] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.114247] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.127026] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.144502] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.153042] vdd-1v0: supplied by regulator-dummy [ 2.158382] vdd-1v8-hs: supplied by regulator-dummy [ 2.162997] vdd-1v8-ls: supplied by regulator-dummy [ 2.167639] vdd-1v8-ao: supplied by regulator-dummy [ 2.171358] vddio-ddr-1v1: supplied by regulator-dummy [ 2.175604] vdd-rtc: supplied by regulator-dummy [ 2.177135] spmic-ldo1: supplied by regulator-dummy [ 2.178244] vdd-ao-3v3: supplied by regulator-dummy [ 2.184206] vddio-emmc-3v3: supplied by regulator-dummy [ 2.190443] spmic-ldo4: supplied by regulator-dummy [ 2.191529] vdd-usb-3v3: supplied by regulator-dummy [ 2.198792] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 2.204895] vdd-csi-1v2: supplied by vdd-1v8-ls [ 2.210288] spmic-ldo8: supplied by vdd-1v8-ls [ 2.211623] gpio-510 (gpio_default): hogged as output/high [ 2.213711] gpio-511 (gpio_default): hogged as output/high [ 2.220879] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 2.226398] random: fast init done [ 2.360670] max77686-rtc max77620-rtc: registered as rtc0 [ 2.361655] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 2.361975] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 3.064342] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.065339] hid: raw HID events driver (C) Jiri Kosina [ 3.066005] usbcore: registered new interface driver usbhid [ 3.066153] usbhid: USB HID core driver [ 3.067947] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.069029] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 25.708856] Camera-FW on t194-rce-safe started TCU early console enabled. [ 25.784288] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.241 ms) 墁 3.154206] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.154677] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.155597] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.156202] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.158250] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.158910] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.159456] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.160879] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.161266] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.163616] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.171037] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.177309] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.182466] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.188880] denver_knobs_init:MTS_VERSION:55637613 [ 3.200694] t19x_cache tegra-cache: probed [ 3.203163] optee: probing for conduit method. [ 3.203945] optee: revision 3.16 (65cc2218) [ 3.204736] optee: dynamic shared memory is enabled [ 3.209252] optee: initialized driver [ 3.215294] nvpmodel: initialized successfully [ 3.216587] tegra_hv: get_hvd: not initialized yet [ 3.221377] user_ivc_mempool: hypervisor not present [ 3.227559] usbcore: registered new interface driver snd-usb-audio [ 3.234244] u32 classifier [ 3.235115] input device check on [ 3.238823] Actions configured [ 3.242677] Initializing XFRM netlink socket [ 3.247207] NET: Registered protocol family 10 [ 3.253465] Segment Routing with IPv6 [ 3.255000] NET: Registered protocol family 17 [ 3.258983] NET: Registered protocol family 15 [ 3.263673] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.277431] Bluetooth: RFCOMM socket layer initialized [ 3.281882] Bluetooth: RFCOMM ver 1.11 [ 3.285543] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.291748] Bluetooth: HIDP socket layer initialized [ 3.297493] 9pnet: Installing 9P2000 support [ 3.301111] Key type dns_resolver registered [ 3.306603] registered taskstats version 1 [ 3.309278] Loading compiled-in X.509 certificates [ 3.322729] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 3.325121] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 3.335437] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 3.337220] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 3.346090] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 3.354196] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 3.469664] tegra194-pcie 14160000.pcie: Link up [ 3.472858] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 3.473101] pci_bus 0004:00: root bus resource [bus 00-ff] [ 3.473244] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 3.473528] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 3.473784] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 3.474161] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 3.474601] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 3.487678] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 3.488131] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.488642] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 3.490268] pci 0004:01:00.0: supports D1 D2 [ 3.490493] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.502368] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 3.502614] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 3.502841] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 3.503442] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.503902] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 3.504121] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 3.504336] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 3.511727] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 3.520390] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 3.531076] pcieport 0004:00:00.0: Adding to iommu group 6 [ 3.535019] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 3.540839] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 3.547877] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 3.556924] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 3.558423] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 3.566726] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 3.575091] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 4.690439] tegra194-pcie 141a0000.pcie: Phy link never came up [ 4.691223] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 4.691488] pci_bus 0005:00: root bus resource [bus 00-ff] [ 4.691664] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 4.691918] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 4.692131] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 4.692634] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 4.693073] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 4.715612] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 4.715862] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 4.717807] pcieport 0005:00:00.0: Adding to iommu group 7 [ 4.719046] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 4.720475] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 4.722204] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 4.723215] pci 0005:00:00.0: Removing from iommu group 7 [ 4.723748] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 4.765094] host1x 13e10000.host1x: Adding to iommu group 8 [ 4.789185] host1x 13e10000.host1x: initialized [ 4.790741] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 4.791673] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 4.792892] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 4.793531] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 4.794868] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 4.795600] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 4.796742] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 4.797314] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 4.798433] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 4.799087] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 4.800275] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 4.807727] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 4.817726] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 4.824355] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 4.834174] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 4.841371] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 4.851244] falcon 15340000.vic: Adding to iommu group 17 [ 4.865924] falcon 15340000.vic: initialized [ 4.867112] falcon 15380000.nvjpg: Adding to iommu group 17 [ 4.873325] falcon 15380000.nvjpg: initialized [ 4.874099] falcon 154c0000.nvenc: Adding to iommu group 17 [ 4.884920] falcon 154c0000.nvenc: initialized [ 4.885511] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 4.894382] falcon 15a80000.nvenc1: initialized [ 4.895036] nvdec 15480000.nvdec: Adding to iommu group 17 [ 4.909161] nvdec 15480000.nvdec: initialized [ 4.909824] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 4.920340] nvdec 15140000.nvdec1: initialized [ 4.921065] tsec 15500000.tsec: Adding to iommu group 18 [ 4.926908] tsec 15500000.tsec: initialized [ 4.927359] tsec 15100000.tsecb: Adding to iommu group 19 [ 4.932831] tsec 15100000.tsecb: initialized [ 4.936722] gic 2a41000.agic-controller: GIC IRQ controller registered [ 4.963715] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 4.975372] gpio-374 (wifi-enable): hogged as output/high [ 4.975616] gpio-431 (camera-control-output-low): hogged as output/low [ 4.975995] gpio-432 (camera-control-output-low): hogged as output/low [ 4.977708] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 4.979812] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 4.980328] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 4.982596] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 4.988168] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 4.993879] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 4.999588] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.007928] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.015200] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.026628] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.031736] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.037774] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.046569] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.055518] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.062784] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.070561] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.076597] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.086590] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.092480] pva 16000000.pva0: Adding to iommu group 22 [ 5.120730] pva 16000000.pva0: initialized [ 5.125794] pva 16800000.pva1: Adding to iommu group 23 [ 5.136453] pva 16800000.pva1: initialized [ 5.140834] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.155168] nvdla 15880000.nvdla0: initialized [ 5.156944] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.167045] nvdla 158c0000.nvdla1: initialized [ 5.169507] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.169871] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.170821] tegradc 15200000.display: Adding to iommu group 26 [ 5.171235] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.172499] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.173100] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 5.173393] tegra_cec 3960000.tegra_cec: probed [ 5.175366] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 5.176013] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.178213] tegradc 15210000.display: Adding to iommu group 26 [ 5.186956] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 5.190844] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.198057] kfuse 3830000.kfuse: initialized [ 5.205131] tegradccommon 15200000.display-hub: dma mapping done [ 5.210211] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 5.221847] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 5.228812] serial-tegra 3100000.serial: Adding to iommu group 2 [ 5.235063] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 5.244423] serial-tegra 3110000.serial: Adding to iommu group 2 [ 5.249859] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 5.258502] serial-tegra 3140000.serial: Adding to iommu group 2 [ 5.264430] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 5.285027] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 5.285382] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.287666] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 5.295546] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 5.304567] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 5.310802] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 5.318688] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.325856] usb usb1: Product: xHCI Host Controller [ 5.330598] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.336909] usb usb1: SerialNumber: 3610000.xhci [ 5.342655] hub 1-0:1.0: USB hub found [ 5.345769] hub 1-0:1.0: 4 ports detected [ 5.350301] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.354822] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 5.362705] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 5.370512] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 5.378268] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.385511] usb usb2: Product: xHCI Host Controller [ 5.390234] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.396503] usb usb2: SerialNumber: 3610000.xhci [ 5.402144] hub 2-0:1.0: USB hub found [ 5.405140] hub 2-0:1.0: 4 ports detected [ 5.446992] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 5.453347] i2c i2c-2: Added multiplexed i2c bus 9 [ 5.454902] i2c i2c-2: Added multiplexed i2c bus 10 [ 5.455077] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 5.468371] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 5.469498] tegra194-cpufreq ccplex: probed with BWMGR [ 5.470702] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 5.471143] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 5.471589] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 5.472832] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 5.481677] tegra194-vi5 15c10000.vi: initialized [ 5.482369] mmc0: CQHCI version 5.10 [ 5.483165] tegradc 15210000.display: disp0 connected to head1->sor [ 5.483936] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 5.488615] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 5.495319] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 5.502365] tegradc 15210000.display: DT parsed successfully [ 5.510338] nvethernet 2490000.ethernet: failed to read MDIO address [ 5.515699] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 5.515896] tegradc 15200000.display: disp0 connected to head0->sor1 [ 5.522113] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 5.522119] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 5.522123] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 5.529651] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 5.529990] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 5.533756] generic_infoframe_type: 0x87 [ 5.533793] tegradc 15200000.display: DT parsed successfully [ 5.533847] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 5.536364] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 5.536370] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 5.588370] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 5.595704] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 5.601968] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 5.601973] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 5.602418] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 5.617759] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 5.621607] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 5.621972] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 5.623272] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 5.623276] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 5.626986] tegradc 15200000.display: probed [ 5.678576] mmc0: Command Queue Engine enabled [ 5.682918] nvethernet 2490000.ethernet: Macsec not supported [ 5.693001] mmc0: periodic cache flush enabled [ 5.693018] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 5.693363] Console: switching to colour frame buffer device 240x67 [ 5.693676] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 5.693687] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 5.695017] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 5.695164] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 5.695291] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 5.696376] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 5.697706] tegradc 15200000.display: fb registered [ 5.697783] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 5.704504] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 5.759747] tegra-se-nvhost 15810000.se: initialized [ 5.766143] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 5.766157] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 5.766332] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 5.775721] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 5.776715] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 5.779098] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 5.783102] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 5.809191] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 5.810617] tegra-se-nvhost 15820000.se: initialized [ 5.815919] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.815924] usb 1-2: Product: 4-Port USB 2.0 Hub [ 5.815927] usb 1-2: Manufacturer: Generic [ 5.818036] hub 1-2:1.0: USB hub found [ 5.826193] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 5.830789] hub 1-2:1.0: 4 ports detected [ 5.837086] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 5.851627] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 5.856639] tegra-se-nvhost 15830000.se: initialized [ 5.860912] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 5.867297] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 5.875063] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 5.875687] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 5.880385] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 5.887482] Extcon AUX1(HDMI) enable [ 5.887605] tegradc 15210000.display: disp1 connected to head1->sor [ 5.894621] tegra-se-nvhost 15840000.se: initialized [ 5.901741] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 5.910685] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 5.915118] tegradc 15210000.display: DT parsed successfully [ 5.919877] tegra_actmon d230000.actmon: in actmon_register()... [ 5.924711] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 5.926449] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 5.929696] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 5.936789] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 5.943060] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 5.948646] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 5.955807] tegradc 15210000.display: probed [ 5.963312] hvc_sysfs: hypervisor is not present [ 5.977702] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.013459] tegradc 15210000.display: fb registered [ 6.013467] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.025731] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.029954] usb 2-3: Manufacturer: Generic [ 6.044935] hub 2-3:1.0: USB hub found [ 6.046938] hub 2-3:1.0: 4 ports detected [ 6.062652] ALSA device list: [ 6.062753] No soundcards found. [ 6.066604] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.066793] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.066994] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.069039] tegradc 15210000.display: blank - powerdown [ 6.074219] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.076092] Freeing unused kernel memory: 3968K [ 6.082440] Extcon DP: HPD disabled [ 6.082445] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.082458] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 榳ARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk 墁 6.103548] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 6.103594] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.103652] tegradc 15200000.display: blank - powerdown [ 6.109683] Run /init as init process [ 6.152103] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.152107] Extcon AUX1(HDMI) disable [ 6.175611] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.176494] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.185626] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 6.185632] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 6.189681] tegradc 15200000.display: unblank [ 6.190959] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.191174] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.197227] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.199224] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.203298] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.203301] Extcon AUX1(HDMI) enable [ 6.215975] tegradc 15200000.display: sync windows ret = 247 [ 6.230999] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 6.238141] Extcon HDMI: HPD enabled [ 6.241809] tegradc 15200000.display: hdmi: plugged [ 6.250803] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 6.254781] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.262384] usb 1-3: Product: Bluetooth Radio [ 6.266839] usb 1-3: Manufacturer: Realtek [ 6.271045] usb 1-3: SerialNumber: 00e04c000001 [ 6.287818] Root device found: initrd [ 6.289439] Mount initrd as rootfs and enter recovery mode Finding OTA work dir on external storage devices Checking whether device /dev/mmcblk?p1 exist Looking for OTA work directory on the device(s): /dev/mmcblk0p1 Checking whether device /dev/sd?1 exist Device /dev/sd?1 does not exist Checking whether device /dev/nvme?n1p1 exist Device /dev/nvme?n1p1 does not exist Finding OTA work dir on internal storage device [ 6.390704] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) OTA work directory /mnt/ota_work is not found on /dev/mmcblk0p1 OTA work directory is not found on internal and external storage devices bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash-5.0# [ 37.993622] vdd-1v8-sd: disabling [ 37.993724] vdd-3v3-cvb: disabling [ 37.993800] vdd-1v8-cvb: disabling [ 37.993877] vdd-epb-1v0: disabling [ 37.993974] vdd-fan: disabling [ 37.994043] vdd_sys_en: disabling [ 63.965896] random: crng init done  ? [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x0, rst_level: 0x0 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.108] I> Temperature = 24000 [0000.111] W> Skipping boost for clk: BPMP_CPU_NIC [0000.115] W> Skipping boost for clk: BPMP_APB [0000.119] W> Skipping boost for clk: AXI_CBB [0000.123] W> Skipping boost for clk: AON_CPU_NIC [0000.127] W> Skipping boost for clk: CAN1 [0000.131] W> Skipping boost for clk: CAN2 [0000.135] I> Boot-device: QSPI (instance: 0) [0000.139] I> Qspi flash params source = mb1bct [0000.143] I> Qspi clock source : pllc_out0 [0000.147] I> Qspi-0 reinitialized [0000.150] I> Qspi flash params source = mb1bct [0000.163] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.170] W> Thermal config not found in BCT [0000.178] W> MEMIO rail config not found in BCT [0000.188] I> Qspi flash params source = mb1bct [0000.202] I> Qspi flash params source = mb1bct [0000.235] I> Qspi flash params source = mb1bct [0000.800] I> Qspi flash params source = mb1bct [0000.816] I> Qspi flash params source = mb1bct [0000.856] W> Platform config not found in BCT [0000.883] I> Qspi flash params source = mb1bct [0000.908] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.917] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.918] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.918] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.919] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.925] W> device prod register failed [0000.929] I> gpio framework initialized [0000.932] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.940] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.948] I> No valid sdcard_params in mb1_bct [0000.952] I> Boot_device: QSPI_FLASH instance: 0 [0000.956] I> qspi flash-0 params source = boot args [0000.962] I> QSPI-0l initialized successfully [0000.965] I> sdmmc-3 params source = safe params [0001.364] I> sdmmc DDR50 mode [0001.382] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.399] W> Cannot find any partition table for 00000003 [0001.401] > PARTITION_MANAGER: Failed to publish partition. [0001.416] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.417] I> Active Boot chain : 0 [0002.089] I> Relocating BR-BCT [0002.090] > DEVICE_PROD: device prod is not initialized. [0002.396] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.397] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.397] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.398] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.398] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.399] I> dram_block larger than 80000000 [0002.401] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.412] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.416] I> found decompressor handler: lz4 [0002.644] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.646] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 觨/歊lk_early initialized 賏C: 滵ail_early initialized 誏o殞use initialized hwwdt initialized 鄚-sec漮194_ec_get_ec_list: found 45 ecs 酳re extern歋c initialized 跾潎mon_setup_monitors: found 3 monitors vmon initialized 鄟 D榥dc initialized fmon_populate_monitors: found 73 monitors 賏 found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Au歊lk_dt_late initialized 輍滱oc_late initialized ?漥m_post initialized dbells initialized ?1 歍mce initialized cvc initialized ?3:23:20 UTC 榥vfs_clk_mach_post initialized ?022榥vfs_clk_platform_post initialized ?aa歊vc_late initialized regulator_post initialized 酺ch6漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized ? I/TC: WARNIN漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] 觩: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.265] I> Welcome to NVDisp-Init [0003.265] I> NVDisp-Init version: t194-f9ecfedc [0003.265] I> CPU-BL Params @ 0xca020000 [0003.266] I> 0) Base:0x00000000 Size:0x00000000 [0003.266] I> 1) Base:0xc8300000 Size:0x00100000 [0003.266] I> 2) Base:0xc9800000 Size:0x00200000 [0003.267] I> 3) Base:0xc8600000 Size:0x00200000 [0003.269] I> 4) Base:0xc8200000 Size:0x00100000 [0003.274] I> 5) Base:0xc8100000 Size:0x00100000 [0003.278] I> 6) Base:0xc9400000 Size:0x00400000 [0003.283] I> 7) Base:0xc9000000 Size:0x00400000 [0003.287] I> 8) Base:0xc8000000 Size:0x00100000 [0003.291] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.296] I> 10) Base:0xca800000 Size:0x00800000 [0003.300] I> 11) Base:0x40000000 Size:0x00040000 [0003.305] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.309] I> 13) Base:0x40046000 Size:0x00002000 [0003.314] I> 14) Base:0x40048000 Size:0x00002000 [0003.318] I> 15) Base:0xaf000000 Size:0x00004000 [0003.323] I> 16) Base:0x4004a000 Size:0x00002000 [0003.327] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.332] I> 18) Base:0x4004c000 Size:0x00002000 [0003.336] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.341] I> 20) Base:0x4004e000 Size:0x00002000 [0003.345] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.349] I> 22) Base:0x00000000 Size:0x00000000 [0003.354] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.358] I> 24) Base:0xcc000000 Size:0x02000000 [0003.363] I> 25) Base:0x40050000 Size:0x00002000 [0003.367] I> 26) Base:0x40040000 Size:0x00006000 [0003.372] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.376] I> 28) Base:0xc8400000 Size:0x00200000 [0003.381] I> 29) Base:0xc8800000 Size:0x00400000 [0003.385] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.390] I> 31) Base:0x00000000 Size:0x00000000 [0003.394] I> 32) Base:0xf8000000 Size:0x08000000 [0003.399] I> 33) Base:0xce000000 Size:0x2a000000 [0003.403] I> 34) Base:0xcb000000 Size:0x01000000 [0003.407] I> 35) Base:0xae000000 Size:0x01000000 [0003.412] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.416] I> 37) Base:0xca000000 Size:0x00800000 [0003.421] I> 38) Base:0x80000000 Size:0x20000000 [0003.425] I> 39) Base:0xb0000000 Size:0x08000000 [0003.430] I> 40) Base:0x00000000 Size:0x00000000 [0003.434] I> 41) Base:0x00000000 Size:0x00000000 [0003.439] I> 42) Base:0x00000000 Size:0x00000000 [0003.443] I> 43) Base:0x00000000 Size:0x00000000 [0003.448] I> 44) Base:0x00000000 Size:0x00000000 [0003.452] I> 45) Base:0x00000000 Size:0x00000000 [0003.457] GIC-SPI Target CPU: 0 [0003.460] Interrupts Init done [0003.462] calling constructors [0003.465] initializing heap [0003.468] I> Heap: [0xa0960000 ... 0xadf00000] [0003.472] initializing threads [0003.475] initializing timers [0003.478] creating bootstrap completion thread [0003.482] top of bootstrap2() [0003.485] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.490] initializing platform [0003.493] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.498] W> device prod register failed [0003.502] I> Bl_dtb @0xadf00000 [0003.505] I> gpio framework initialized [0003.517] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.522] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.529] I> fixed regulator driver initialized [0003.540] I> register 'maxim' power off handle [0003.542] I> virtual i2c enabled [0003.543] I> registered 'maxim,max20024' pmic [0003.543] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.546] I> Boot-device: QSPI [0003.549] I> Boot_device: QSPI_FLASH instance: 0 [0003.554] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.564] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.571] I> QSPI source rate = 204000 Khz [0003.574] I> Requested rate for QSPI clock = 34000 Khz [0003.580] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.584] I> tx_clk_tap_delay : 0 [0003.587] I> rx_clk_tap_delay : 16 [0003.591] I> QSPI Flash Size = 32 MB [0003.598] I> Qspi initialized successfully [0003.599] I> qspi flash-0 params source = boot args [0003.603] W> No board IDs available [0003.606] E> Failed to get board id info! [0003.612] I> sdmmc-3 params source = safe params [0003.619] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.621] W> Cannot find any partition table for 00000003 [0003.625] E> Failed to publish 00000003 [0003.634] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.650] I> regulator 'vdd-hdmi-5v0' already enabled [0003.656] I> regulator 'vdd-hdmi-5v0' already enabled [0003.656] I> hdmi cable connected [0003.662] W> set volts not configured for 'vdd-1v0' [0003.667] W> set volts not configured for 'vdd-1v8-hs' [0003.668] I> retrieved tmds range from prod_list_hdmi_soc [0003.674] E> invalid display type [0003.675] E> cannot find any other nvdisp nodes [0003.692] I> edid read success [0003.704] I> edid read success [0003.704] I> width = 640, height = 480, frequency = 25174825 [0003.705] I> width = 1920, height = 1080, frequency = 148500000 [0003.705] I> width = 1280, height = 768, frequency = 79500000 [0003.706] I> width = 1360, height = 768, frequency = 85500000 [0003.706] I> width = 720, height = 480, frequency = 26973026 [0003.710] I> width = 720, height = 576, frequency = 26973026 [0003.715] I> width = 1280, height = 720, frequency = 74175824 [0003.721] I> width = 1280, height = 720, frequency = 74175824 [0003.727] I> width = 1920, height = 1080, frequency = 148351648 [0003.732] I> width = 1920, height = 1080, frequency = 148351648 [0003.738] I> width = 720, height = 480, frequency = 26973026 [0003.744] I> width = 720, height = 576, frequency = 26973026 [0003.749] I> width = 3840, height = 2160, frequency = 296703296 [0003.755] I> width = 3840, height = 2160, frequency = 296703296 [0003.761] I> width = 3840, height = 2160, frequency = 296703296 [0003.767] I> width = 3840, height = 2160, frequency = 296703296 [0003.772] I> width = 4096, height = 2160, frequency = 296703296 [0003.778] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.789] I> hdmi_enable, starting HDMI initialisation [0003.794] I> hdmi_enable, HDMI initialisation complete [0003.803] initializing target [0003.804] calling apps_init() [0003.805] starting app kernel_boot_app [0003.805] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting Recovery Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] printk: bootconsole [tegra_comb_uart0] enabled [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x259442018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259445f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/initrd rw rootwait console=ttyTCU0,115200n8 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6929312K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 479004K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008738] Console: colour dummy device 80x25 [ 0.012373] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022499] pid_max: default: 32768 minimum: 301 [ 0.027230] LSM: Security Framework initializing [ 0.031819] Yama: becoming mindful. [ 0.035459] SELinux: Initializing. [ 0.039211] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.046665] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.057329] rcu: Hierarchical SRCU implementation. [ 0.059838] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.068022] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.085014] DTB Build time: Aug 10 2022 20:31:49 [ 0.092438] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.096571] Remapping and enabling EFI services. [ 0.102891] smp: Bringing up secondary CPUs ... ? Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.198559] Detected PIPT I-cache on CPU1 [ 0.198631] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.229497] Detected PIPT I-cache on CPU2 [ 0.229578] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.259295] Detected PIPT I-cache on CPU3 [ 0.259438] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.289172] Detected PIPT I-cache on CPU4 [ 0.289333] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.319072] Detected PIPT I-cache on CPU5 [ 0.319181] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.319509] smp: Brought up 1 node, 6 CPUs [ 0.320580] SMP: Total of 6 processors activated. [ 0.320722] CPU features: detected: Privileged Access Never [ 0.320824] CPU features: detected: LSE atomic instructions [ 0.320931] CPU features: detected: User Access Override [ 0.321336] CPU features: detected: 32-bit EL0 Support [ 0.321695] CPU features: detected: RAS Extension Support [ 0.322105] CPU features: detected: CRC32 instructions [ 0.322907] CPU features: detected: 32-bit EL1 Support [ 0.394545] CPU: All CPU(s) started at EL2 [ 0.400668] devtmpfs: initialized [ 0.447222] Registered cp15_barrier emulation handler [ 0.447416] Registered setend emulation handler [ 0.447506] KASLR enabled [ 0.447785] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.447967] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.449442] pinctrl core: initialized pinctrl subsystem [ 0.450564] SMBIOS 3.0.0 present. [ 0.450637] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.451480] NET: Registered protocol family 16 [ 0.453512] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.454390] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.455430] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.455623] audit: initializing netlink subsys (disabled) [ 0.455968] audit: type=2000 audit(0.400:1): state=initialized audit_enabled=0 res=1 [ 0.456370] thermal_sys: Registered thermal governor 'step_wise' [ 0.456376] thermal_sys: Registered thermal governor 'power_allocator' [ 0.456504] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.460497] cpuidle: using governor menu [ 0.469272] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.476005] ASID allocator initialised with 32768 entries [ 0.481373] Serial: AMBA PL011 UART driver [ 0.487982] Tegra reboot handler registered. [ 0.561067] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.561386] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.561667] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.561832] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.562091] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.562266] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.562552] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.562696] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.562948] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.563129] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.565699] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.565833] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.571462] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.577946] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.584412] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.591004] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.597555] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.604013] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.610562] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.617062] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.623531] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.630001] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.636389] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.642763] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.649159] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.655553] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.661961] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.668151] mc-err: mcerr ops are set to t19x [ 0.684548] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.684729] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.685865] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.692314] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.708642] ACPI: Interpreter disabled. [ 0.709842] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.711188] iommu: Default domain type: Translated [ 0.712552] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.719082] SCSI subsystem initialized [ 0.722508] usbcore: registered new interface driver usbfs [ 0.727782] usbcore: registered new interface driver hub [ 0.733285] usbcore: registered new device driver usb [ 0.738688] mc: Linux media interface: v0.10 [ 0.742688] videodev: Linux video capture interface: v2.00 [ 0.748453] pps_core: LinuxPPS API ver. 1 registered [ 0.752995] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.762115] PTP clock support registered [ 0.766245] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.773159] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.780002] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.786940] Registered efivars operations [ 0.795556] FPGA manager framework [ 0.795718] Advanced Linux Sound Architecture Driver Initialized. [ 0.800389] Bluetooth: Core ver 2.22 [ 0.803507] NET: Registered protocol family 31 [ 0.807778] Bluetooth: HCI device and connection manager initialized [ 0.814178] Bluetooth: HCI socket layer initialized [ 0.818898] Bluetooth: L2CAP socket layer initialized [ 0.824424] Bluetooth: SCO socket layer initialized [ 0.831042] camchar: rtcpu character device driver loaded [ 0.835694] clocksource: Switched to clocksource arch_sys_counter [ 1.129713] VFS: Disk quotas dquot_6.6.0 [ 1.129850] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.130324] pnp: PnP ACPI: disabled [ 1.142100] la/ptsa driver initialized. [ 1.142302] NET: Registered protocol family 2 [ 1.142538] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.147369] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.147637] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.148051] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.148597] TCP: Hash tables configured (established 65536 bind 65536) [ 1.148865] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.149095] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.149474] NET: Registered protocol family 1 [ 1.150393] RPC: Registered named UNIX socket transport module. [ 1.150527] RPC: Registered udp transport module. [ 1.150615] RPC: Registered tcp transport module. [ 1.150693] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.150834] PCI: CLS 0 bytes, default 64 [ 1.151267] Trying to unpack rootfs image as initramfs... [ 1.530423] Freeing initrd memory: 11876K [ 1.534888] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.535040] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.535179] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.535612] kvm [1]: IPA Size Limit: 40 bits [ 1.536318] kvm [1]: vgic interrupt IRQ9 [ 1.536907] kvm [1]: VHE mode initialized successfully [ 1.538450] Initialise system trusted keyrings [ 1.538908] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.544416] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.545318] NFS: Registering the id_resolver key type [ 1.545456] Key type id_resolver registered [ 1.545557] Key type id_legacy registered [ 1.545720] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.545888] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.546067] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.555991] NET: Registered protocol family 38 [ 1.556110] Key type asymmetric registered [ 1.556198] Asymmetric key parser 'x509' registered [ 1.556366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.556795] io scheduler mq-deadline registered [ 1.556909] io scheduler kyber registered [ 1.562566] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.565495] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.567155] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.572694] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.578274] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.583969] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.594978] scrncapt: init (heads:4 wins:6 planes:4) [ 1.595029] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.596239] EINJ: ACPI disabled. [ 1.608058] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.611798] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 1.616956] tegra-pmc: ### PMC reset level: L0 [ 1.621231] tegra-pmc: ### PMC reset status reg: 0x0 [ 1.626251] tegra-pmc: PMC Prod config success [ 1.636116] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.639367] printk: console [ttyTCU0] enabled [ 1.639367] printk: console [ttyTCU0] enabled 1.644967] printk: bootconsole [tegra_comb_uart0] disabled [ 1.644967] printk: bootconsole [tegra_comb_uart0] disabled [ 1.657626] arm-smmu 10000000.iommu: probing hardware configuration... [ 1.662744] arm-smmu 10000000.iommu: SMMUv2 with: [ 1.667492] arm-smmu 10000000.iommu: stage 1 translation [ 1.673158] arm-smmu 10000000.iommu: stage 2 translation [ 1.678132] arm-smmu 10000000.iommu: nested translation [ 1.683717] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 1.691071] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 1.702048] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 1.704196] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.710930] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.718002] arm-smmu 12000000.iommu: probing hardware configuration... [ 1.723617] arm-smmu 12000000.iommu: SMMUv2 with: [ 1.728340] arm-smmu 12000000.iommu: stage 1 translation [ 1.733592] arm-smmu 12000000.iommu: stage 2 translation [ 1.739275] arm-smmu 12000000.iommu: nested translation [ 1.744448] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 1.751625] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 1.754749] random: fast init done [ 1.762393] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 1.768416] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.774717] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.782278] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 1.791772] tegra_profiler: version: 1.147, samples/io: 49/28 [ 1.795077] tegra_profiler: auth: init [ 1.799602] THERMAL EST: found 3 subdevs [ 1.802986] THERMAL EST num_resources: 0 [ 1.806577] [THERMAL EST subdev 0] [ 1.810236] [THERMAL EST subdev 1] [ 1.813218] [THERMAL EST subdev 2] [ 1.816903] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.823320] THERMAL EST: thz register success. [ 1.827160] THERMAL EST: end of probe, return err: 0 [ 1.832926] nvsciipc: loaded module [ 1.840172] tun: Universal TUN/TAP device driver, 1.6 [ 1.842392] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 1.848666] hns3: Copyright (c) 2017 Huawei Corporation. [ 1.853974] e1000e: Intel(R) PRO/1000 Network Driver [ 1.859152] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.864966] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.870524] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.876674] PPP generic driver version 2.4.2 [ 1.880954] PPP BSD Compression module registered [ 1.885509] PPP Deflate Compression module registered [ 1.890760] PPP MPPE Compression module registered [ 1.895504] usbcore: registered new interface driver r8152 [ 1.901307] usbcore: registered new interface driver asix [ 1.906342] usbcore: registered new interface driver ax88179_178a [ 1.912469] usbcore: registered new interface driver cdc_ether [ 1.918676] usbcore: registered new interface driver net1080 [ 1.924277] usbcore: registered new interface driver cdc_subset [ 1.930060] usbcore: registered new interface driver zaurus [ 1.935765] usbcore: registered new interface driver cdc_ncm [ 1.941447] usbcore: registered new interface driver aqc111 [ 1.947052] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.953411] ohci-pci: OHCI PCI platform driver [ 1.957449] ohci-platform: OHCI generic platform driver [ 1.963312] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 1.969841] usbcore: registered new interface driver uas [ 1.974051] usbcore: registered new interface driver usb-storage [ 1.979934] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 1.986208] mousedev: PS/2 mouse device common for all mice [ 1.990919] usbcore: registered new interface driver xpad [ 1.999248] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.001919] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.009692] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.016283] i2c /dev entries driver [ 2.019541] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.025107] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.030695] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.036124] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.041456] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.046944] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.052354] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.065519] device-mapper: uevent: version 1.0.3 [ 2.066023] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.072776] cpuidle: Initializing cpuidle driver [ 2.076490] sdhci: Secure Digital Host Controller Interface driver [ 2.081257] sdhci: Copyright(c) Pierre Ossman [ 2.085605] Synopsys Designware Multimedia Card Interface Driver [ 2.091525] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.097472] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.098368] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.110990] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.132006] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.142307] vdd-1v0: supplied by regulator-dummy [ 2.148100] vdd-1v8-hs: supplied by regulator-dummy [ 2.153242] vdd-1v8-ls: supplied by regulator-dummy [ 2.158283] vdd-1v8-ao: supplied by regulator-dummy [ 2.162602] vddio-ddr-1v1: supplied by regulator-dummy [ 2.167618] vdd-rtc: supplied by regulator-dummy [ 2.169726] spmic-ldo1: supplied by regulator-dummy [ 2.171515] vdd-ao-3v3: supplied by regulator-dummy [ 2.178356] vddio-emmc-3v3: supplied by regulator-dummy [ 2.184927] spmic-ldo4: supplied by regulator-dummy [ 2.186789] vdd-usb-3v3: supplied by regulator-dummy [ 2.193501] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 2.200393] vdd-csi-1v2: supplied by vdd-1v8-ls [ 2.206477] spmic-ldo8: supplied by vdd-1v8-ls [ 2.208858] gpio-510 (gpio_default): hogged as output/high [ 2.210789] gpio-511 (gpio_default): hogged as output/high [ 2.213759] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 2.349490] max77686-rtc max77620-rtc: registered as rtc0 [ 2.350825] max77620-power max20024-power: Event recorder REG_NVERC : 0x40 [ 2.351150] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 3.187794] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.188878] hid: raw HID events driver (C) Jiri Kosina [ 3.189713] usbcore: registered new interface driver usbhid [ 3.189842] usbhid: USB HID core driver [ 3.191863] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.193172] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 26.156291] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.230540] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.777 ms, total boot 75.055 ms) 墁 3.277629] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.278185] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.279403] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.280239] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.281901] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.282662] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.283328] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.284883] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.285132] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.288605] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.294622] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.300941] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.306066] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.312557] denver_knobs_init:MTS_VERSION:55637613 [ 3.324467] t19x_cache tegra-cache: probed [ 3.327414] optee: probing for conduit method. [ 3.328504] optee: revision 3.16 (65cc2218) [ 3.329851] optee: dynamic shared memory is enabled [ 3.332662] optee: initialized driver [ 3.340117] nvpmodel: initialized successfully [ 3.340804] tegra_hv: get_hvd: not initialized yet [ 3.345145] user_ivc_mempool: hypervisor not present [ 3.351063] usbcore: registered new interface driver snd-usb-audio [ 3.357583] u32 classifier [ 3.358810] input device check on [ 3.362641] Actions configured [ 3.365984] Initializing XFRM netlink socket [ 3.370855] NET: Registered protocol family 10 [ 3.378321] Segment Routing with IPv6 [ 3.378634] NET: Registered protocol family 17 [ 3.382812] NET: Registered protocol family 15 [ 3.386862] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.400315] Bluetooth: RFCOMM socket layer initialized [ 3.405132] Bluetooth: RFCOMM ver 1.11 [ 3.409269] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.414866] Bluetooth: HIDP socket layer initialized [ 3.420904] 9pnet: Installing 9P2000 support [ 3.424552] Key type dns_resolver registered [ 3.429846] registered taskstats version 1 [ 3.433066] Loading compiled-in X.509 certificates [ 3.445681] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 3.448529] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 3.459031] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 3.460704] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 3.469624] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 3.477896] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 3.595788] tegra194-pcie 14160000.pcie: Link up [ 3.598966] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 3.599198] pci_bus 0004:00: root bus resource [bus 00-ff] [ 3.599386] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 3.599640] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 3.599888] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 3.600272] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 3.600770] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 3.613130] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 3.613602] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.614086] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 3.615887] pci 0004:01:00.0: supports D1 D2 [ 3.616034] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.627105] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 3.627520] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 3.628087] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 3.628660] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.628973] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 3.629231] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 3.630299] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 3.637771] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 3.646544] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 3.656756] pcieport 0004:00:00.0: Adding to iommu group 6 [ 3.660979] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 3.666694] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 3.673725] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 3.682797] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 3.684454] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 3.692656] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 3.701384] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 4.816519] tegra194-pcie 141a0000.pcie: Phy link never came up [ 4.816995] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 4.817257] pci_bus 0005:00: root bus resource [bus 00-ff] [ 4.817385] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 4.817728] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 4.817939] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 4.818355] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 4.818775] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 4.836377] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 4.836702] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 4.838474] pcieport 0005:00:00.0: Adding to iommu group 7 [ 4.840021] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 4.841366] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 4.843247] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 4.844501] pci 0005:00:00.0: Removing from iommu group 7 [ 4.844819] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 4.879011] host1x 13e10000.host1x: Adding to iommu group 8 [ 4.900300] host1x 13e10000.host1x: initialized [ 4.901562] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 4.902409] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 4.903829] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 4.904521] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 4.905604] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 4.906296] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 4.907268] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 4.907960] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 4.909784] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 4.916558] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 4.926476] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 4.933759] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 4.943592] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 4.950761] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 4.960554] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 4.967768] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 4.977489] falcon 15340000.vic: Adding to iommu group 17 [ 4.991648] falcon 15340000.vic: initialized [ 4.992713] falcon 15380000.nvjpg: Adding to iommu group 17 [ 4.998189] falcon 15380000.nvjpg: initialized [ 4.998786] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.010519] falcon 154c0000.nvenc: initialized [ 5.011040] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.020097] falcon 15a80000.nvenc1: initialized [ 5.020719] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.032762] nvdec 15480000.nvdec: initialized [ 5.033305] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.041862] nvdec 15140000.nvdec1: initialized [ 5.042358] tsec 15500000.tsec: Adding to iommu group 18 [ 5.048883] tsec 15500000.tsec: initialized [ 5.049297] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.057917] tsec 15100000.tsecb: initialized [ 5.061710] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.084857] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.095890] gpio-374 (wifi-enable): hogged as output/high [ 5.096198] gpio-431 (camera-control-output-low): hogged as output/low [ 5.096451] gpio-432 (camera-control-output-low): hogged as output/low [ 5.098155] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.100522] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.101917] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.108883] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.113817] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.119946] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.125434] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.133307] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.141290] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.152290] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.157897] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.163881] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.172705] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.181665] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.188765] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.196812] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.202762] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.212705] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.218676] pva 16000000.pva0: Adding to iommu group 22 [ 5.244321] pva 16000000.pva0: initialized [ 5.249449] pva 16800000.pva1: Adding to iommu group 23 [ 5.260086] pva 16800000.pva1: initialized [ 5.264524] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.284292] nvdla 15880000.nvdla0: initialized [ 5.285761] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.301217] nvdla 158c0000.nvdla1: initialized [ 5.302494] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.302767] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.303439] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.304074] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.304364] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 5.304538] tegra_cec 3960000.tegra_cec: probed [ 5.306388] tegradc 15200000.display: Adding to iommu group 26 [ 5.314310] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 5.316305] tegradc 15210000.display: Adding to iommu group 26 [ 5.316639] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.317160] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.319220] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 5.324652] tegradccommon 15200000.display-hub: dma mapping done [ 5.331730] kfuse 3830000.kfuse: initialized [ 5.342216] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 5.348119] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 5.354873] serial-tegra 3100000.serial: Adding to iommu group 2 [ 5.361135] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 5.370259] serial-tegra 3110000.serial: Adding to iommu group 2 [ 5.375520] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 5.384494] serial-tegra 3140000.serial: Adding to iommu group 2 [ 5.390178] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 5.409958] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 5.410324] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.413598] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 5.421926] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 5.430398] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 5.437147] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 5.444590] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.451727] usb usb1: Product: xHCI Host Controller [ 5.456951] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.463247] usb usb1: SerialNumber: 3610000.xhci [ 5.468729] hub 1-0:1.0: USB hub found [ 5.471874] hub 1-0:1.0: 4 ports detected [ 5.476307] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.480959] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 5.488821] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 5.496504] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 5.504154] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.511410] usb usb2: Product: xHCI Host Controller [ 5.516641] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.522839] usb usb2: SerialNumber: 3610000.xhci [ 5.528220] hub 2-0:1.0: USB hub found [ 5.531317] hub 2-0:1.0: 4 ports detected [ 5.572624] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 5.578089] i2c i2c-2: Added multiplexed i2c bus 9 [ 5.579253] i2c i2c-2: Added multiplexed i2c bus 10 [ 5.579436] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 5.592811] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 5.593928] tegra194-cpufreq ccplex: probed with BWMGR [ 5.595076] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 5.595738] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 5.596239] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 5.597806] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 5.606801] mmc0: CQHCI version 5.10 [ 5.608158] tegra194-vi5 15c10000.vi: initialized [ 5.610162] tegradc 15200000.display: disp0 connected to head0->sor1 [ 5.611648] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 5.615366] generic_infoframe_type: 0x87 [ 5.621510] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 5.625072] tegradc 15200000.display: DT parsed successfully [ 5.633458] nvethernet 2490000.ethernet: failed to read MDIO address [ 5.638740] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 5.642771] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 5.645507] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 5.654433] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 5.660923] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 5.660932] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 5.667990] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 5.667994] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 5.668321] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 5.683738] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 5.688838] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 5.697221] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 5.697229] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 5.705724] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 5.712559] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 5.718974] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 5.729513] mmc0: Command Queue Engine enabled [ 5.729517] mmc0: periodic cache flush enabled [ 5.729528] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 5.730000] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 5.730190] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 5.730324] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 5.730443] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 5.730737] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 5.734274] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 5.739697] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 5.750450] tegradc 15200000.display: probed [ 5.756124] nvethernet 2490000.ethernet: Macsec not supported [ 5.757420] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 5.843819] Console: switching to colour frame buffer device 240x67 [ 5.844822] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 5.849303] tegradc 15200000.display: fb registered [ 5.860100] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 5.865793] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 5.866839] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 5.873246] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 5.879254] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 5.887184] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 5.899544] tegra-se-nvhost 15810000.se: initialized [ 5.904206] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 5.909461] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 5.911259] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 5.915858] tegra-se-nvhost 15820000.se: initialized [ 5.923497] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.923502] usb 1-2: Product: 4-Port USB 2.0 Hub [ 5.923506] usb 1-2: Manufacturer: Generic [ 5.925577] hub 1-2:1.0: USB hub found [ 5.930352] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 5.940496] hub 1-2:1.0: 4 ports detected [ 5.945080] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 5.960512] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 5.965823] tegra-se-nvhost 15830000.se: initialized [ 5.979588] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 5.980403] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 5.986765] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.000923] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.000968] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.007587] Extcon AUX1(HDMI) enable [ 6.007851] tegradc 15210000.display: disp1 connected to head1->sor [ 6.014604] tegra-se-nvhost 15840000.se: initialized [ 6.017367] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.025205] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.028574] tegradc 15210000.display: DT parsed successfully [ 6.036879] tegra_actmon d230000.actmon: in actmon_register()... [ 6.041973] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.047608] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.053630] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.053772] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.053780] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.061985] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.095528] hvc_sysfs: hypervisor is not present [ 6.096906] tegradc 15210000.display: probed [ 6.104133] tegradc 15210000.display: fb registered [ 6.111625] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.117058] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.124405] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.126213] ALSA device list: [ 6.128943] usb 2-3: Manufacturer: Generic [ 6.130981] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.132102] No soundcards found. [ 6.139592] hub 2-3:1.0: USB hub found [ 6.143670] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.148944] hub 2-3:1.0: 4 ports detected [ 6.151086] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 榳ARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk 墁 6.168554] tegradc 15200000.display: blank - powerdown [ 6.169495] Freeing unused kernel memory: 3968K [ 6.179871] Run /init as init process [ 6.210934] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.210938] Extcon AUX1(HDMI) disable [ 6.231686] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 6.234231] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.235071] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.247041] tegradc 15200000.display: unblank [ 6.248346] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.248543] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.254513] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.256374] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.260389] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.260393] Extcon AUX1(HDMI) enable [ 6.273142] tegradc 15200000.display: sync windows ret = 247 [ 6.275826] tegradc 15210000.display: blank - powerdown [ 6.278493] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.278496] Extcon DP: HPD disabled [ 6.278501] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.278513] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.278517] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.310476] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 6.317464] Extcon HDMI: HPD enabled [ 6.321109] tegradc 15200000.display: hdmi: plugged [ 6.323703] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 6.360650] Root device found: initrd [ 6.362295] Mount initrd as rootfs and enter recovery mode [ 6.380935] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 6.381198] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.381401] usb 1-3: Product: Bluetooth Radio [ 6.381510] usb 1-3: Manufacturer: Realtek [ 6.381634] usb 1-3: SerialNumber: 00e04c000001 [ 6.388254] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 6.388439] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. Finding OTA work dir on external storage devices Checking whether device /dev/mmcblk?p1 exist Looking for OTA work directory on the device(s): /dev/mmcblk0p1 Checking whether device /dev/sd?1 exist Device /dev/sd?1 does not exist Checking whether device /dev/nvme?n1p1 exist Device /dev/nvme?n1p1 does not exist Finding OTA work dir on internal storage device [ 6.465145] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) OTA work directory /mnt/ota_work is not found on /dev/mmcblk0p1 OTA work directory is not found on internal and external storage devices bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash-5.0# [ 38.003739] vdd-1v8-sd: disabling [ 38.003854] vdd-3v3-cvb: disabling [ 38.003949] vdd-1v8-cvb: disabling [ 38.004021] vdd-epb-1v0: disabling [ 38.004096] vdd-fan: disabling [ 38.004171] vdd_sys_en: disabling [ 54.273037] random: crng init done