[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.201-tegra (jetsonhostpc@jetsonhostpc-Vostro-470) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 11:50:09 KST 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304 [ 0.000000] pcpu-alloc: s57560 r8192 d32552 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 gpt earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29284(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3568496K/4159488K available (15294K kernel code, 2942K rwdata, 6752K rodata, 8576K init, 609K bss, 115856K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009610000 ( 6784 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e70000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e70000 - 0xffffff800a14f808 ( 2943 KB) [ 0.000000] .bss : 0xffffff800a14f808 - 0xffffff800a1e7cbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001802] Console: colour dummy device 80x25 [ 0.001812] console [tty0] enabled [ 0.001819] bootconsole [uart8250] disabled [ 0.001834] kmemleak: Kernel memory leak detector disabled [ 0.001856] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001869] pid_max: default: 32768 minimum: 301 [ 0.002325] Security Framework initialized [ 0.002544] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002552] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003663] ftrace: allocating 47208 entries in 185 pages [ 0.172474] sched-energy: CPU device node has no sched-energy-costs [ 0.172506] ASID allocator initialised with 65536 entries [ 0.212118] tegra-id: chipid=22117. [ 0.212130] tegra-id: opt_subrevision=0. [ 0.212148] Tegra Speedo/IDDQ fuse revision 4 [ 0.212154] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.212158] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.212165] Tegra: CPU Speedo Value 2032, SoC Speedo Value 1905, GPU Speedo Value 2012 [ 0.212169] Tegra: CPU IDDQ Value 1932, SoC IDDQ Value 2076, GPU IDDQ Value 2445 [ 0.212188] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.212246] DTS File Name: /home/jetsonhostpc/coding/nano_sdcard_build_kernel/Linux_for_Tegra/source/public/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.212255] DTB Build time: Jul 30 2021 15:09:46 [ 0.261058] CPU1: Booted secondary processor [411fd071] [ 0.292955] CPU2: Booted secondary processor [411fd071] [ 0.324924] CPU3: Booted secondary processor [411fd071] [ 0.325020] Brought up 4 CPUs [ 0.325027] SMP: Total of 4 processors activated. [ 0.325035] CPU features: detected feature: 32-bit EL0 Support [ 0.325293] CPU: All CPU(s) started at EL2 [ 0.325311] alternatives: patching kernel code [ 0.333471] devtmpfs: initialized [ 0.373265] Initilizing CustomIPI irq domain [ 0.373639] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.373658] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.384146] pinctrl core: initialized pinctrl subsystem [ 0.384736] OS set in device tree is not L4T. [ 0.385194] regulator-dummy: no parameters [ 0.385457] Initializing plugin-manager [ 0.385612] Plugin module not found [ 0.385802] node /plugin-manager/fragement@0 match with board >=3448-0002-100 [ 0.386333] node /plugin-manager/fragment@1 match with board >=3448-0002-101 [ 0.386758] node /plugin-manager/fragment@3 match with board >=3448-0002-100 [ 0.387453] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.387653] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.388213] node /plugin-manager/fragement@10 match with board >=3448-0002-300 [ 0.390191] node /plugin-manager/fragement@13 match with board >=3448-0002-300 [ 0.393935] NET: Registered protocol family 16 [ 0.396364] pstore: using zlib compression [ 0.396397] console [pstore-1] enabled [ 0.396401] pstore: Registered ramoops as persistent store backend [ 0.396407] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.413073] cpuidle: using governor menu [ 0.417408] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.419141] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e74000) [ 0.419163] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.421539] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.423980] Serial: AMBA PL011 UART driver [ 0.424556] tegra_powergate_init: DONE [ 0.424571] DTS File Name: /home/jetsonhostpc/coding/nano_sdcard_build_kernel/Linux_for_Tegra/source/public/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.424579] DTB Build time: Jul 30 2021 15:09:46 [ 0.426638] Tegra reboot handler registered. [ 0.431255] iommu: Adding device tegra-carveouts to group 0 [ 0.431399] platform tegra-carveouts: domain=ffffffc0f944f498 allocates as[0]=ffffffc0f94440a8 [ 0.431743] iommu: Adding device smmu_test to group 1 [ 0.431791] platform smmu_test: domain=ffffffc0f944f6d8 allocates as[0]=ffffffc0f9444110 [ 0.432605] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.432663] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.432718] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.432727] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.432752] mc-err: mcerr ops are set to t21x [ 0.443427] iommu: Adding device 70090000.xusb to group 2 [ 0.443715] iommu: Adding device 70006000.serial to group 3 [ 0.443786] platform 70006000.serial: domain=ffffffc0f9473618 allocates as[0]=ffffffc0f9444178 [ 0.444211] iommu: Adding device 70006040.serial to group 4 [ 0.444482] iommu: Adding device 70006200.serial to group 5 [ 0.444697] iommu: Adding device sound to group 6 [ 0.444744] platform sound: domain=ffffffc0f9473b58 allocates as[0]=ffffffc0f94441e0 [ 0.445350] iommu: Adding device 7000d400.spi to group 7 [ 0.445605] iommu: Adding device 7000d600.spi to group 8 [ 0.445936] iommu: Adding device 50000000.host1x to group 9 [ 0.446207] iommu: Adding device 54080000.vi to group 10 [ 0.446593] iommu: Adding device 54600000.isp to group 11 [ 0.446856] iommu: Adding device 54680000.isp to group 12 [ 0.447118] iommu: Adding device tegradc.0 to group 13 [ 0.447192] platform tegradc.0: domain=ffffffc0f94e8918 allocates as[0]=ffffffc0f9444248 [ 0.447715] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.448035] iommu: Adding device tegradc.1 to group 14 [ 0.448083] platform tegradc.1: domain=ffffffc0f94e8b58 allocates as[0]=ffffffc0f94442b0 [ 0.448587] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.448841] iommu: Adding device 54340000.vic to group 15 [ 0.449067] iommu: Adding device 544c0000.nvenc to group 16 [ 0.449271] iommu: Adding device 54500000.tsec to group 17 [ 0.449474] iommu: Adding device 54100000.tsecb to group 18 [ 0.449678] iommu: Adding device 54480000.nvdec to group 19 [ 0.449868] iommu: Adding device 54380000.nvjpg to group 20 [ 0.450953] iommu: Adding device 546c0000.i2c to group 21 [ 0.451290] iommu: Adding device 57000000.gpu to group 22 [ 0.451340] platform 57000000.gpu: domain=ffffffc0f94f2b58 allocates as[0]=ffffffc0f9444318 [ 0.451375] platform 57000000.gpu: domain=ffffffc0f94f2b58 allocates as[1]=ffffffc0f9444380 [ 0.451415] platform 57000000.gpu: domain=ffffffc0f94f2b58 allocates as[2]=ffffffc0f94443e8 [ 0.451453] platform 57000000.gpu: domain=ffffffc0f94f2b58 allocates as[3]=ffffffc0f9444450 [ 0.452342] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.452353] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.452364] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.452368] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.452373] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.505127] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.505135] tegra-pmc: Clear bootloader IO dpd settings [ 0.505155] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.505210] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.505500] iommu: Adding device 70012000.se to group 23 [ 0.506275] iommu: Adding device 7000c000.i2c to group 24 [ 0.506532] iommu: Adding device 7000c400.i2c to group 25 [ 0.506775] iommu: Adding device 7000c500.i2c to group 26 [ 0.507032] iommu: Adding device 7000c700.i2c to group 27 [ 0.507284] iommu: Adding device 7000d000.i2c to group 28 [ 0.507562] iommu: Adding device 7000d100.i2c to group 29 [ 0.507828] iommu: Adding device sdhci-tegra.3 to group 30 [ 0.507883] platform sdhci-tegra.3: domain=ffffffc0f957bcd8 allocates as[0]=ffffffc0f94444b8 [ 0.508315] iommu: Adding device sdhci-tegra.2 to group 31 [ 0.508373] platform sdhci-tegra.2: domain=ffffffc0f957bf18 allocates as[0]=ffffffc0f9444520 [ 0.509243] iommu: Adding device 700d0000.xudc to group 32 [ 0.512429] vdd-ac-bat: 5000 mV [ 0.512774] vdd-5v0-sys: 5000 mV [ 0.513775] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.513819] vdd-5v0-hdmi: 5000 mV [ 0.514208] vdd-1v8-sys: 1800 mV [ 0.514592] vdd-fan: supplied by vdd-5v0-sys [ 0.514632] vdd-fan: 5000 mV [ 0.515071] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.515104] vdd-usb-vbus: 5000 mV [ 0.515628] vdd-usb-vbus2: 5000 mV [ 0.545803] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.548165] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.550361] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.550382] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.550421] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.550784] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.558694] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.559036] SCSI subsystem initialized [ 0.559258] libata version 3.00 loaded. [ 0.559547] usbcore: registered new interface driver usbfs [ 0.559596] usbcore: registered new interface driver hub [ 0.559670] usbcore: registered new device driver usb [ 0.563672] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.568409] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.568564] random: fast init done [ 0.569454] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.572228] vdd-ddr-1v1: 1150 mV [ 0.576227] vdd-pre-reg-1v35: 1350 mV [ 0.580227] vdd-1v8: 1800 mV [ 0.584230] avdd-sys-1v2: 1200 mV [ 0.588225] vdd-pex-1v0: 1050 mV [ 0.588923] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.589471] max77620-ldo3: at 3100 mV [ 0.592235] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.592774] max77620-ldo5: at 3100 mV [ 0.596229] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.600225] avdd-1v05-pll: 1050 mV [ 0.604225] avdd-io-hdmi-dp: 1050 mV [ 0.606880] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.607187] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.607485] max77620 4-003c: max77620 probe successful [ 0.610193] media: Linux media interface: v0.10 [ 0.610254] Linux video capture interface: v2.00 [ 0.611200] pps_core: LinuxPPS API ver. 1 registered [ 0.611206] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.611227] PTP clock support registered [ 0.614604] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.615467] Advanced Linux Sound Architecture Driver Initialized. [ 0.616101] Bluetooth: Core ver 2.22 [ 0.616153] NET: Registered protocol family 31 [ 0.616157] Bluetooth: HCI device and connection manager initialized [ 0.616171] Bluetooth: HCI socket layer initialized [ 0.616178] Bluetooth: L2CAP socket layer initialized [ 0.616262] Bluetooth: SCO socket layer initialized [ 0.618026] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.618044] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.618094] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.618108] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.621919] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.623105] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.623188] vdd-3v3-sys: 3300 mV [ 0.623471] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.624306] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.624753] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.624789] vdd-3v3-sd: 3300 mV [ 0.625882] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.625924] avdd-io-edp-1v05: 1050 mV [ 0.626342] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.626378] vdd-usb-hub-en: 5000 mV [ 0.627713] camchar: rtcpu character device driver loaded [ 0.628459] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1 [ 0.629880] clocksource: Switched to clocksource arch_sys_counter [ 0.669729] VFS: Disk quotas dquot_6.6.0 [ 0.669866] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.670416] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.670830] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.670849] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.671063] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.671070] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.671081] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.671108] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.671115] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.671128] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.671136] nvmap_page_pool_init: Total RAM pages: 1010908 [ 0.671141] nvmap_page_pool_init: nvmap page pool size: 126363 pages (493 MB) [ 0.671216] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.671711] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.672557] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.680844] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.681321] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.681701] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.682017] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.682212] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.682502] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.682506] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.682939] NET: Registered protocol family 2 [ 0.683918] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.684130] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.684631] TCP: Hash tables configured (established 32768 bind 32768) [ 0.684786] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.684867] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.685279] NET: Registered protocol family 1 [ 0.686039] RPC: Registered named UNIX socket transport module. [ 0.686045] RPC: Registered udp transport module. [ 0.686049] RPC: Registered tcp transport module. [ 0.686053] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.686067] PCI: CLS 0 bytes, default 64 [ 0.686296] Trying to unpack rootfs image as initramfs... [ 0.989133] Freeing initrd memory: 6992K [ 0.999218] host1x 50000000.host1x: initialized [ 1.001132] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.004394] audit: initializing netlink subsys (disabled) [ 1.004484] audit: type=2000 audit(0.855:1): initialized [ 1.005259] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.014991] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.016448] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.017241] 9p: Installing v9fs 9p2000 file system support [ 1.020525] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.020671] io scheduler noop registered [ 1.020967] io scheduler cfq registered (default) [ 1.023671] gic 702f9000.agic: GIC IRQ controller registered [ 1.026704] iommu: Adding device 702ef000.adsp to group 33 [ 1.035876] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 1.036089] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.036729] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x89e9c13 [ 1.036737] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.038426] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.038526] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.038619] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.038806] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.038894] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.038982] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.039063] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.039150] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.039245] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.039334] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.045473] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.047278] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.049154] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.050460] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.050806] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.051965] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.052187] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.052428] Adding domain tsec-pd to PM domain host1x-pd [ 1.054950] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.055854] tsec 54500000.tsec: initialized [ 1.057446] tsec 54100000.tsecb: initialized [ 1.058195] Adding domain nvdec-pd to PM domain host1x-pd [ 1.061780] nvdec 54480000.nvdec: initialized [ 1.062916] Adding domain vic03-pd to PM domain host1x-pd [ 1.063096] Adding domain msenc-pd to PM domain host1x-pd [ 1.063261] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.067451] falcon 54340000.vic: initialized [ 1.068725] falcon 544c0000.nvenc: initialized [ 1.070082] falcon 54380000.nvjpg: initialized [ 1.074710] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 1.074757] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.074790] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.074829] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.074920] display board info: id 0x0, fab 0x0 [ 1.074976] generic_infoframe_type: 0x87 [ 1.075068] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.075073] tegra_cec 70015000.tegra_cec: probed [ 1.075130] tegradc tegradc.0: DT parsed successfully [ 1.075186] tegradc tegradc.0: Display dc.ffffff800ab80000 registered with id=0 [ 1.078880] tegradc tegradc.0: probed [ 1.079603] Console: switching to colour frame buffer device 80x30 [ 1.079639] tegradc tegradc.0: fb registered [ 1.080914] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.080992] tegradc tegradc.1: No lt-data, using default setting [ 1.081018] tegradc tegradc.1: No hpd-gpio in DT [ 1.081048] tegradc tegradc.1: DT parsed successfully [ 1.081090] tegradc tegradc.1: Display dc.ffffff800ad00000 registered with id=1 [ 1.082830] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.083448] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.588552] Host read timeout at address 545c00c4 [ 1.588585] edid invalid [ 1.589828] tegradc tegradc.1: probed [ 1.590318] tegradc tegradc.1: fb registered [ 1.591542] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.592306] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.592313] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.592601] kfuse 7000fc00.kfuse: initialized [ 1.593520] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.593578] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.593584] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.593593] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.593606] tegradc tegradc.1: blank - powerdown [ 1.593629] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.593634] Extcon DP: HPD disabled [ 1.593638] hpd: hpd_switch 0 [ 1.593642] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.593672] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.593679] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.594441] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.594699] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 1.594713] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.594720] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.594726] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.594733] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.594777] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400 [ 1.594889] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.595178] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 1.595258] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.595595] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.595607] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.595626] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.595636] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.595792] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 1.595822] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.595856] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 1.595879] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 1.596035] pci 0000:01:00.0: supports D1 D2 [ 1.596039] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.596080] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.597388] vdd-gpu: applied init 1000000uV constraint [ 1.597395] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.597757] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.601138] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.601228] No Device Node present for smmu client: serial8250 !! [ 1.601237] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.601277] iommu: Adding device serial8250 to group 35 [ 1.603550] console [ttyS0] disabled [ 1.603627] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.610013] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.610205] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 1.610237] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.610272] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 1.610294] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.610453] pci 0000:02:00.0: supports D1 D2 [ 1.610458] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.613932] console [ttyS0] enabled [ 1.614945] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.615222] serial-tegra 70006200.serial: RX in PIO mode [ 1.615309] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.616262] [drm] Initialized [ 1.618007] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 1.618092] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 1.618102] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 1.618108] pci 0000:00:01.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.618114] pci 0000:00:02.0: BAR 13: assigned [io 0x2000-0x2fff] [ 1.618127] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] [ 1.618149] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] [ 1.618169] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 1.618180] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.618186] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 1.618194] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 1.618206] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 1.618228] pci 0000:02:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref] [ 1.618248] pci 0000:02:00.0: BAR 0: assigned [io 0x2000-0x20ff] [ 1.618257] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.618262] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff] [ 1.618270] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 1.618772] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.618779] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.618787] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 1.618913] aer 0000:00:01.0:pcie002: service driver aer loaded [ 1.619170] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.619176] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.619183] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 1.619296] aer 0000:00:02.0:pcie002: service driver aer loaded [ 1.631053] brd: module loaded [ 1.636346] loop: module loaded [ 1.636474] tegra_profiler: version: 1.143, samples/io: 48/28 [ 1.636587] tegra_profiler: auth: init [ 1.638226] THERMAL EST: found 2 subdevs [ 1.638234] THERMAL EST num_resources: 0 [ 1.638240] [THERMAL EST subdev 0] [ 1.638248] [THERMAL EST subdev 1] [ 1.638705] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.638708] THERMAL EST: thz register success. [ 1.638860] THERMAL EST: end of probe, return err: 0 [ 1.640068] sd: No Scsi addr parsed to reserve index [ 1.640109] hisi_sas: driver version v1.6 [ 1.647599] libphy: Fixed MDIO Bus: probed [ 1.649651] tun: Universal TUN/TAP device driver, 1.6 [ 1.649656] tun: (C) 1999-2004 Max Krasnyansky [ 1.650922] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.650927] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.651021] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.651024] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.651118] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.651122] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.651209] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.651213] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.652398] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 1.652426] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 1.666638] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 1.666773] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e9:f5:0e from device tree [ 1.667525] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.667571] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.667730] r8168 0000:02:00.0: enabling device (0000 -> 0003) [ 1.667753] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 1.688934] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 1.688990] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e9:f5:0e from device tree [ 1.689620] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.689641] sysfs: cannot create duplicate filename '/kernel/rt8168_power' [ 1.689688] ------------[ cut here ]------------ [ 1.689716] WARNING: CPU: 0 PID: 1 at /home/jetsonhostpc/coding/nano_sdcard_build_kernel/Linux_for_Tegra/source/public/kernel/kernel-4.9/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 [ 1.689720] Modules linked in: [ 1.689737] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.201-tegra #1 [ 1.689741] Hardware name: NVIDIA Jetson Nano Developer Kit (DT) [ 1.689745] task: ffffffc0fa6f0000 task.stack: ffffffc0fa66c000 [ 1.689751] PC is at sysfs_warn_dup+0x68/0x88 [ 1.689758] LR is at sysfs_warn_dup+0x68/0x88 [ 1.689762] pc : [] lr : [] pstate: 40400045 [ 1.689765] sp : ffffffc0fa66f9a0 [ 1.689768] x29: ffffffc0fa66f9a0 x28: ffffffc0fa64f0a0 [ 1.689777] x27: 0000000000000000 x26: ffffff800904e000 [ 1.689785] x25: ffffff800a1b6130 x24: ffffffc0f7b90918 [ 1.689793] x23: ffffff800a40c000 x22: ffffffc0f9afbdc0 [ 1.689800] x21: ffffffc0f9afcd20 x20: ffffff80094a0168 [ 1.689807] x19: ffffffc0f96df000 x18: 00000000fffffff7 [ 1.689814] x17: 0000000000000000 x16: 0000000000000000 [ 1.689820] x15: 0000000000000007 x14: 73746e6574617020 [ 1.689827] x13: 676e69776f6c6c6f x12: 0000000000000000 [ 1.689834] x11: 0000000000000004 x10: 00000000000001ec [ 1.689841] x9 : 0000000000000000 x8 : ffffffc0fef8f7cc [ 1.689848] x7 : 0000000000000000 x6 : 0000000000000001 [ 1.689854] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.689861] x3 : ffffffffffffffff x2 : ffffff8009e941b8 [ 1.689867] x1 : ffffffc0fa6f0000 x0 : 000000000000003e [ 1.689881] ---[ end trace 5552617911ae6ae8 ]--- [ 1.689886] Call trace: [ 1.689894] [] sysfs_warn_dup+0x68/0x88 [ 1.689901] [] sysfs_create_dir_ns+0x9c/0xb0 [ 1.689915] [] kobject_add_internal+0x98/0x348 [ 1.689921] [] kobject_add+0x88/0xf0 [ 1.689926] [] kobject_create_and_add+0x38/0x80 [ 1.689943] [] rtl8168_init_one+0x1194/0x1248 [ 1.689948] [] rtl8168_probe+0x7c/0x118 [ 1.689958] [] pci_device_probe+0xa4/0x140 [ 1.689970] [] driver_probe_device+0xd8/0x408 [ 1.689974] [] __driver_attach+0xdc/0x128 [ 1.689979] [] bus_for_each_dev+0x5c/0xa8 [ 1.689985] [] driver_attach+0x30/0x40 [ 1.689989] [] bus_add_driver+0x20c/0x2a8 [ 1.689997] [] driver_register+0x6c/0x110 [ 1.690005] [] __pci_register_driver+0x50/0x60 [ 1.690020] [] rtl8168_init_module+0x4c/0x58 [ 1.690030] [] do_one_initcall+0x44/0x130 [ 1.690041] [] kernel_init_freeable+0x1a0/0x244 [ 1.690053] [] kernel_init+0x18/0x108 [ 1.690058] [] ret_from_fork+0x10/0x30 [ 1.693559] kobject_add_internal failed for rt8168_power with -EEXIST, don't try to register things with the same name in the same directory. [ 1.709550] kobject_create_and_add: kobject_add error: -17 [ 1.709555] unable to create rt8168_power_saver kernel object! [ 1.715438] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.716318] PPP generic driver version 2.4.2 [ 1.716633] PPP BSD Compression module registered [ 1.716638] PPP Deflate Compression module registered [ 1.716673] PPP MPPE Compression module registered [ 1.716681] NET: Registered protocol family 24 [ 1.716800] usbcore: registered new interface driver r8152 [ 1.716883] usbcore: registered new interface driver asix [ 1.716996] usbcore: registered new interface driver ax88179_178a [ 1.717074] usbcore: registered new interface driver cdc_ether [ 1.717159] usbcore: registered new interface driver net1080 [ 1.717237] usbcore: registered new interface driver cdc_subset [ 1.717315] usbcore: registered new interface driver zaurus [ 1.717405] usbcore: registered new interface driver cdc_ncm [ 1.717666] VFIO - User Level meta-driver version: 0.3 [ 1.719178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.719203] ehci-pci: EHCI PCI platform driver [ 1.719294] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.719305] ohci-pci: OHCI PCI platform driver [ 1.719391] ohci-platform: OHCI generic platform driver [ 1.722218] tegradc tegradc.0: blank - powerdown [ 1.730471] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.742461] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.743861] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f90a2000 id [ 1.745933] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 1.746005] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.746038] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.746833] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.746908] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.747123] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.747128] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.747133] usb usb1: Product: xHCI Host Controller [ 1.747137] usb usb1: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.747142] usb usb1: SerialNumber: 70090000.xusb [ 1.747917] hub 1-0:1.0: USB hub found [ 1.747961] hub 1-0:1.0: 5 ports detected [ 1.748357] usbcore: registered new interface driver uas [ 1.748483] usbcore: registered new interface driver usb-storage [ 1.748644] usbcore: registered new interface driver usbserial [ 1.748652] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.748666] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.748773] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.748892] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.748897] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.748901] usb usb2: Product: xHCI Host Controller [ 1.748905] usb usb2: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.748909] usb usb2: SerialNumber: 70090000.xusb [ 1.749524] hub 2-0:1.0: USB hub found [ 1.749562] hub 2-0:1.0: 4 ports detected [ 1.750455] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.750462] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.753017] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.754581] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.754595] tegra-xudc-new 700d0000.xudc: vbus state: 1 [ 1.754612] tegra-xudc-new 700d0000.xudc: device mode on: 0 [ 1.754622] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [ 1.754651] tegra-xudc-new 700d0000.xudc: active: 0 => 1 [ 1.755403] mousedev: PS/2 mouse device common for all mice [ 1.755527] usbcore: registered new interface driver xpad [ 1.764559] tegradc tegradc.0: unblank [ 1.798068] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 1.798162] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 1.799256] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.834184] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.834189] Extcon AUX1(HDMI) enable [ 1.849472] tegradc tegradc.0: sync windows ret = 247 [ 1.849982] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.854085] usb usb2: usb_suspend_both: status 0 [ 1.877234] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.877238] Extcon HDMI: HPD enabled [ 1.877260] tegradc tegradc.0: hdmi: plugged [ 1.882155] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.884306] rtc rtc1: alarm rtc device [ 1.884319] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.884338] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.884727] i2c /dev entries driver [ 1.886039] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.886337] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.886343] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.886955] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.910231] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.910303] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.918038] imx219 7-0010: board setup failed [ 1.922495] imx219: probe of 7-0010 failed with error -121 [ 1.922923] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.946189] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.946267] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.953895] imx219 8-0010: board setup failed [ 1.958348] imx219: probe of 8-0010 failed with error -121 [ 1.959259] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.961237] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.961243] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.961541] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.961554] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.961562] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.961690] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.961700] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.961708] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.961856] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.961889] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.961895] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.962079] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.962618] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.962665] tegra_aotag tegra-aotag: Invalid temp readout [ 1.962685] tegra_aotag tegra-aotag: Invalid temp readout [ 1.962702] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.962711] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.963489] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.963504] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.963654] tegra_aotag tegra-aotag: Invalid temp readout [ 1.963677] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.964031] parse_throttle_dt_data: Num cap clks = 6 [ 1.964037] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.964045] parse_throttle_dt_data: clk=gpu type=4 [ 1.964066] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.964085] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.964105] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.964109] parse_throttle_dt_data: clk=emc type=3 [ 1.964402] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.964492] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.964601] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.965180] FAN dev name: pwm-fan [ 1.965222] FAN:gpio request success. [ 1.965232] FAN: can't find tach_gpio [ 1.965257] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.965488] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.965495] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.965566] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.965572] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.965577] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.965582] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.965587] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.965592] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.965597] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.965602] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.965607] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.965612] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.967870] device-mapper: uevent: version 1.0.3 [ 1.968256] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.971009] tegra210-cpufreq cpufreq: probe()...completed [ 1.971747] sdhci: Secure Digital Host Controller Interface driver [ 1.971749] sdhci: Copyright(c) Pierre Ossman [ 1.971751] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.972110] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 1.973574] sdhci-tegra sdhci-tegra.2: Got CD GPIO [ 1.973972] sdhci-tegra sdhci-tegra.2: Client registration for eMC Successful [ 1.974070] sdhci-tegra sdhci-tegra.2: wakeup init done, cdirq 301 [ 1.981030] tegra-se 70012000.se: tegra_se_probe: complete [ 1.981597] hidraw: raw HID events driver (C) Jiri Kosina [ 1.982836] usbcore: registered new interface driver usbhid [ 1.982839] usbhid: USB HID core driver [ 1.984917] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.985217] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.987152] nvpmodel: initialized successfully [ 1.988129] usbcore: registered new interface driver snd-usb-audio [ 1.988189] No Device Node present for smmu client: snd-soc-dummy !! [ 1.988194] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.988212] iommu: Adding device snd-soc-dummy to group 36 [ 2.003228] OPE platform probe [ 2.003325] OPE platform probe successful [ 2.003410] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 2.003589] OPE platform probe [ 2.003671] OPE platform probe successful [ 2.017949] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 2.026051] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA 64-bit with 64 bit addr [ 2.026789] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.026913] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.027043] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.027161] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.027282] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.027402] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.027522] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.027644] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.027762] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.027879] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.039468] u32 classifier [ 2.039471] Actions configured [ 2.039545] Initializing XFRM netlink socket [ 2.040253] NET: Registered protocol family 10 [ 2.041033] NET: Registered protocol family 17 [ 2.041046] NET: Registered protocol family 15 [ 2.041120] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.041222] Bluetooth: RFCOMM socket layer initialized [ 2.041233] Bluetooth: RFCOMM ver 1.11 [ 2.041246] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.041251] Bluetooth: HIDP socket layer initialized [ 2.041269] 9pnet: Installing 9P2000 support [ 2.041307] Key type dns_resolver registered [ 2.041702] Registered cp15_barrier emulation handler [ 2.041709] Registered setend emulation handler [ 2.042860] registered taskstats version 1 [ 2.043525] Adding domain ve2-pd to PM domain host1x-pd [ 2.043766] Adding domain ve-pd to PM domain host1x-pd [ 2.046032] isp 54600000.isp: initialized [ 2.046956] isp 54680000.isp: initialized [ 2.057332] last reset is due to software reset [ 2.057336] KERNEL: PMC reset status reg: 0x3 [ 2.057394] BL: PMC reset status reg: 0x3 [ 2.057396] BL: PMIC poweroff Event Recorder: 0x0 [ 2.058976] clk_cbus_recalc_rate: no gbus parent [ 2.058981] clk_cbus_round_rate: no gbus parent [ 2.058983] clk_cbus_round_rate: no gbus parent [ 2.058990] clk_cbus_recalc_rate: no gbus parent [ 2.059094] clk_cbus_recalc_rate: no gbus parent [ 2.059097] clk_cbus_round_rate: no gbus parent [ 2.059099] clk_cbus_round_rate: no gbus parent [ 2.059103] clk_cbus_recalc_rate: no gbus parent [ 2.059799] tegra_dvfs: GPU-cap: registered [ 2.059854] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 2.059857] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 2.059859] tegra dvfs: vdd-gpu: nominal 1078mV, offset 708000uV, step 10000uV, scaling enabled [ 2.061258] tegra_dvfs: vdd-gpu-vts: registered [ 2.061960] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 2.062611] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 2.063150] input: gpio-keys as /devices/gpio-keys/input/input1 [ 2.070538] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.070870] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.070997] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.071104] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.071209] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.073606] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 2.073908] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.094605] tegra_rtc 7000e000.rtc: setting system clock to 2021-07-30 06:10:54 UTC (1627625454) [ 2.095120] usb 1-2: New USB device found, idVendor=0424, idProduct=2807 [ 2.095125] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.095129] usb 1-2: Product: USB2807 Hub [ 2.095132] usb 1-2: Manufacturer: Microchip [ 2.095676] vi 54080000.vi: vi_probe: ++ [ 2.095933] hub 1-2:1.0: USB hub found [ 2.096006] hub 1-2:1.0: 7 ports detected [ 2.097908] tegra_cec 70015000.tegra_cec: physical address: 14:00. [ 2.098760] vi 54080000.vi: initialized [ 2.100839] vi 54080000.vi: subdev nvcsi--2 bound [ 2.100941] vi 54080000.vi: subdev nvcsi--1 bound [ 2.101168] mmcblk mmc0:0001: Card claimed for testing. [ 2.102570] Disable partitions left on by BL [ 2.102574] disb [ 2.102626] bwmgr: missing cdev-type property [ 2.102726] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.102732] DRAM derating cdev registered. [ 2.103671] ALSA device list: [ 2.103674] #0: tegra-hda at 0x70038000 irq 82 [ 2.103676] #1: tegra-snd-t210ref-mobile-rt565x [ 2.106686] Freeing unused kernel memory: 8576K [ 2.130369] Root device found: mmcblk0p1 [ 2.131783] Found dev node: /dev/mmcblk0p1 [ 2.162499] tegra_cec 70015000.tegra_cec: Sent res: -113. [ 2.162504] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.214191] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 2.234440] usb 2-1: New USB device found, idVendor=0424, idProduct=5807 [ 2.234445] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.234448] usb 2-1: Product: USB5807 Hub [ 2.234451] usb 2-1: Manufacturer: Microchip [ 2.235234] hub 2-1:1.0: USB hub found [ 2.235297] hub 2-1:1.0: 7 ports detected [ 2.454198] EXT4-fs (mmcblk0p1): 19 orphan inodes deleted [ 2.454202] EXT4-fs (mmcblk0p1): recovery complete [ 2.475711] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.477496] Rootfs mounted over mmcblk0p1 [ 2.489896] Switching from initrd to actual rootfs [ 2.589474] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.600611] cgroup: cgroup2: unknown option "nsdelegate" [ 2.616147] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.616929] systemd[1]: Detected architecture arm64. [ 2.640608] systemd[1]: Set hostname to . [ 2.716753] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.716762] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.793939] usb 1-2.5: new high-speed USB device number 3 using tegra-xusb [ 2.814633] random: systemd: uninitialized urandom read (16 bytes read) [ 2.814652] usb 1-2.5: New USB device found, idVendor=1a40, idProduct=0101 [ 2.814656] usb 1-2.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.814660] usb 1-2.5: Product: USB 2.0 Hub [ 2.815499] hub 1-2.5:1.0: USB hub found [ 2.815568] hub 1-2.5:1.0: 4 ports detected [ 2.816456] systemd[1]: Created slice User and Session Slice. [ 2.816596] random: systemd: uninitialized urandom read (16 bytes read) [ 2.816619] systemd[1]: Reached target User and Group Name Lookups. [ 2.816817] random: systemd: uninitialized urandom read (16 bytes read) [ 2.817899] usb 2-1: usb_suspend_both: status 0 [ 2.818052] usb usb2: usb_suspend_both: status 0 [ 2.818645] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.818696] systemd[1]: Reached target Swap. [ 2.819538] systemd[1]: Created slice System Slice. [ 2.862263] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.944698] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 2.959845] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.959868] cpu-throttle-alert cooling device registered. [ 2.959981] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.959995] gpu-throttle-alert cooling device registered. [ 2.960131] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.960143] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.960158] hot-surface-alert cooling device registered. [ 3.121909] usb 1-2.5.1: new full-speed USB device number 4 using tegra-xusb [ 3.144071] usb 1-2.5.1: New USB device found, idVendor=1a86, idProduct=e050 [ 3.144078] usb 1-2.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.144082] usb 1-2.5.1: Product: USB Keyboard-Mouse_V1.7 [ 3.144085] usb 1-2.5.1: Manufacturer: USB Keyboard-Mouse [ 3.146649] input: USB Keyboard-Mouse USB Keyboard-Mouse_V1.7 as /devices/70090000.xusb/usb1/1-2/1-2.5/1-2.5.1/1-2.5.1:1.0/0003:1A86:E050.0001/input/input2 [ 3.165202] systemd-journald[2008]: Received request to flush runtime journal from PID 1 [ 3.206663] hid-generic 0003:1A86:E050.0001: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard-Mouse USB Keyboard-Mouse_V1.7] on usb-70090000.xusb-2.5.1/input0 [ 3.208682] input: USB Keyboard-Mouse USB Keyboard-Mouse_V1.7 as /devices/70090000.xusb/usb1/1-2/1-2.5/1-2.5.1/1-2.5.1:1.1/0003:1A86:E050.0002/input/input3 [ 3.266204] hid-generic 0003:1A86:E050.0002: input,hidraw1: USB HID v1.10 Device [USB Keyboard-Mouse USB Keyboard-Mouse_V1.7] on usb-70090000.xusb-2.5.1/input1 [ 3.268260] input: USB Keyboard-Mouse USB Keyboard-Mouse_V1.7 as /devices/70090000.xusb/usb1/1-2/1-2.5/1-2.5.1/1-2.5.1:1.2/0003:1A86:E050.0003/input/input4 [ 3.268663] hid-generic 0003:1A86:E050.0003: input,hidraw2: USB HID v1.10 Mouse [USB Keyboard-Mouse USB Keyboard-Mouse_V1.7] on usb-70090000.xusb-2.5.1/input2 [ 3.270756] input: USB Keyboard-Mouse USB Keyboard-Mouse_V1.7 as /devices/70090000.xusb/usb1/1-2/1-2.5/1-2.5.1/1-2.5.1:1.3/0003:1A86:E050.0004/input/input5 [ 3.330387] hid-generic 0003:1A86:E050.0004: input,hidraw3: USB HID v1.10 Device [USB Keyboard-Mouse USB Keyboard-Mouse_V1.7] on usb-70090000.xusb-2.5.1/input3 [ 3.409908] usb 1-2.5.2: new high-speed USB device number 5 using tegra-xusb [ 3.430352] usb 1-2.5.2: New USB device found, idVendor=1a40, idProduct=0101 [ 3.430359] usb 1-2.5.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.430363] usb 1-2.5.2: Product: USB 2.0 Hub [ 3.431270] hub 1-2.5.2:1.0: USB hub found [ 3.431345] hub 1-2.5.2:1.0: 4 ports detected [ 3.671778] using random self ethernet address [ 3.682091] using random host ethernet address [ 3.737908] usb 1-2.5.2.1: new low-speed USB device number 6 using tegra-xusb [ 3.762023] usb 1-2.5.2.1: New USB device found, idVendor=04ca, idProduct=0061 [ 3.762030] usb 1-2.5.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.762034] usb 1-2.5.2.1: Product: USB Optical Mouse [ 3.762037] usb 1-2.5.2.1: Manufacturer: PixArt [ 3.764980] input: PixArt USB Optical Mouse as /devices/70090000.xusb/usb1/1-2/1-2.5/1-2.5.2/1-2.5.2.1/1-2.5.2.1:1.0/0003:04CA:0061.0005/input/input6 [ 3.765405] hid-generic 0003:04CA:0061.0005: input,hidraw4: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-70090000.xusb-2.5.2.1/input0 [ 3.861915] usb 1-2.5.2.2: new low-speed USB device number 7 using tegra-xusb [ 3.888856] usb 1-2.5.2.2: New USB device found, idVendor=413c, idProduct=2113 [ 3.888863] usb 1-2.5.2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.888867] usb 1-2.5.2.2: Product: Dell KB216 Wired Keyboard [ 3.893457] input: Dell KB216 Wired Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.5/1-2.5.2/1-2.5.2.2/1-2.5.2.2:1.0/0003:413C:2113.0006/input/input7 [ 3.950427] hid-generic 0003:413C:2113.0006: input,hidraw5: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-70090000.xusb-2.5.2.2/input0 [ 3.955694] input: Dell KB216 Wired Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.5/1-2.5.2/1-2.5.2.2/1-2.5.2.2:1.1/0003:413C:2113.0007/input/input8 [ 4.014167] hid-generic 0003:413C:2113.0007: input,hidraw6: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-70090000.xusb-2.5.2.2/input1 [ 4.092413] random: crng init done [ 4.095845] random: 7 urandom warning(s) missed due to ratelimiting [ 7.154429] zram: Added device: zram0 [ 7.174142] zram: Added device: zram1 [ 7.176658] zram: Added device: zram2 [ 7.183161] zram: Added device: zram3 [ 7.227558] zram0: detected capacity change from 0 to 519577600 [ 7.379689] Adding 507396k swap on /dev/zram0. Priority:5 extents:1 across:507396k SS [ 7.384042] zram1: detected capacity change from 0 to 519577600 [ 7.408125] Adding 507396k swap on /dev/zram1. Priority:5 extents:1 across:507396k SS [ 7.411681] zram2: detected capacity change from 0 to 519577600 [ 7.426873] Adding 507396k swap on /dev/zram2. Priority:5 extents:1 across:507396k SS [ 7.431320] zram3: detected capacity change from 0 to 519577600 [ 7.463204] Adding 507396k swap on /dev/zram3. Priority:5 extents:1 across:507396k SS [ 7.548570] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 7.555703] eth1: 0xffffff800a40c000, 00:04:4b:e9:f5:0e, IRQ 407 [ 7.694113] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 7.713771] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.715003] eth0: 0xffffff800a40a000, 00:04:4b:e9:f5:0e, IRQ 406 [ 7.768959] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.809938] r8168: eth0: link up [ 9.809986] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.689545] tegradc tegradc.0: unblank [ 10.689771] tegradc tegradc.1: blank - powerdown [ 11.408809] fuse init (API version 7.26) [ 13.745358] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.745368] Bluetooth: BNEP socket layer initialized [ 23.282213] tegradc tegradc.0: blank - powerdown [ 23.333171] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 23.333180] Extcon AUX1(HDMI) disable [ 23.353541] tegradc tegradc.1: blank - powerdown [ 23.498779] tegradc tegradc.0: blank - powerdown [ 23.498791] tegradc tegradc.0: unblank [ 23.534639] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 23.534731] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 23.535756] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 23.573836] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 23.573839] Extcon AUX1(HDMI) enable [ 23.579713] tegradc tegradc.0: unblank [ 23.580077] tegradc tegradc.1: blank - powerdown [ 27.172835] tegradc tegradc.0: unblank [ 27.172845] tegradc tegradc.1: blank - powerdown [ 33.908402] vdd-fan: disabling [ 33.908444] vdd-usb-vbus: disabling [ 33.908475] vdd-usb-vbus2: disabling [ 33.908555] vddio-sdmmc-ap: disabling [ 33.909204] vdd-3v3-sd: disabling [ 33.909244] avdd-io-edp-1v05: disabling [ 33.909274] vdd-usb-hub-en: disabling [ 109.110475] mmc1: Data end bit error [ 109.114048] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 109.119870] sdhci: Sys addr: 0x00000000 | Version: 0x00000303 [ 109.125691] sdhci: Blk size: 0x00007008 | Blk cnt: 0x00000000 [ 109.131513] sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 [ 109.137335] sdhci: Present: 0x01eb0000 | Host ctl: 0x00000011 [ 109.143157] sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 109.148978] sdhci: Wake-up: 0x00000000 | Clock: 0x00000407 [ 109.154798] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 109.160619] sdhci: Int enab: 0x02ff100b | Sig enab: 0x02fc100b [ 109.166440] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 109.172260] sdhci: Caps: 0x376cd08c | Caps_1: 0x10006f73 [ 109.178080] sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 [ 109.183899] sdhci: Host ctl2: 0x00003008 [ 109.187817] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000ffefe410 [ 109.194383] sdhci: =========================================== [ 109.202137] mmc1: error -84 whilst initialising SD card [ 109.288010] mmc1: Data end bit error [ 109.291584] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 109.297406] sdhci: Sys addr: 0x00000000 | Version: 0x00000303 [ 109.303264] sdhci: Blk size: 0x00007008 | Blk cnt: 0x00000000 [ 109.309112] sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 [ 109.314933] sdhci: Present: 0x01eb0000 | Host ctl: 0x00000011 [ 109.320753] sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 109.326574] sdhci: Wake-up: 0x00000000 | Clock: 0x00000607 [ 109.332394] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 109.338215] sdhci: Int enab: 0x02ff100b | Sig enab: 0x02fc100b [ 109.344071] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 109.349918] sdhci: Caps: 0x376cd08c | Caps_1: 0x10006f73 [ 109.355742] sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 [ 109.361594] sdhci: Host ctl2: 0x00003008 [ 109.365539] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000ffefe410 [ 109.372115] sdhci: =========================================== [ 109.378996] mmc1: error -84 whilst initialising SD card [ 109.468929] mmc1: Data end bit error [ 109.472502] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 109.478325] sdhci: Sys addr: 0x00000000 | Version: 0x00000303 [ 109.484147] sdhci: Blk size: 0x00007008 | Blk cnt: 0x00000000 [ 109.489968] sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 [ 109.495789] sdhci: Present: 0x01eb0000 | Host ctl: 0x00000011 [ 109.501611] sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 109.507432] sdhci: Wake-up: 0x00000000 | Clock: 0x00000807 [ 109.513253] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 109.519074] sdhci: Int enab: 0x02ff100b | Sig enab: 0x02fc100b [ 109.524895] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 109.530716] sdhci: Caps: 0x376cd08c | Caps_1: 0x10006f73 [ 109.536538] sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 [ 109.542388] sdhci: Host ctl2: 0x00003008 [ 109.546329] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000ffefe410 [ 109.552895] sdhci: =========================================== [ 109.559330] mmc1: error -84 whilst initialising SD card [ 109.662895] mmc1: Data end bit error [ 109.666468] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 109.672291] sdhci: Sys addr: 0x00000000 | Version: 0x00000303 [ 109.678112] sdhci: Blk size: 0x00007008 | Blk cnt: 0x00000000 [ 109.683932] sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 [ 109.689754] sdhci: Present: 0x01eb0000 | Host ctl: 0x00000011 [ 109.695574] sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 109.701394] sdhci: Wake-up: 0x00000000 | Clock: 0x00001007 [ 109.707216] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 109.713038] sdhci: Int enab: 0x02ff100b | Sig enab: 0x02fc100b [ 109.718858] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 109.724678] sdhci: Caps: 0x376cd08c | Caps_1: 0x10006f73 [ 109.730498] sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 [ 109.736318] sdhci: Host ctl2: 0x00003008 [ 109.740235] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000ffefe410 [ 109.746802] sdhci: =========================================== [ 109.753295] mmc1: error -84 whilst initialising SD card