GBA0# ##o0BR! [0000.063] I> MB1 (version: 1.2.0.0-t234-54845784-562369e5) [0000.068] I> t234-A01-0-Silicon (0x12347) Prod [0000.073] I> Boot-mode : Coldboot [0000.076] I> Entry timestamp: 0x00000000 [0000.080] I> last_boot_error: 0x49490303 [0000.083] I> BR-BCT: preprod_dev_sign: 0 [0000.087] I> rst_source: 0x3, rst_level: 0x1 [0000.091] I> Task: SE error check [0000.094] I> Task: Bootchain select WAR set [0000.098] I> Task: Enable SLCG [0000.101] I> Task: CRC check [0000.104] I> Skip FUSE records CRC check as records_integrity fuse is not burned [0000.111] I> Task: Initialize MB2 params [0000.116] I> MB2-params @ 0x40060000 [0000.119] I> Task: Crypto init [0000.122] I> Task: Perform MB1 KAT tests [0000.126] I> Task: NVRNG health check [0000.129] I> NVRNG: Health check success [0000.133] I> Task: MSS Bandwidth limiter settings for iGPU clients [0000.139] I> Task: Enabling and initialization of Bandwidth limiter [0000.145] I> No request to configure MBWT settings for any PC! [0000.151] I> Task: Secure debug controls [0000.155] I> Task: strap war set [0000.158] I> Task: Initialize SOC Therm [0000.162] I> Task: Program NV master stream id [0000.166] I> Task: Verify boot mode [0000.172] I> Task: Alias fuses [0000.175] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.182] I> Task: Print SKU type [0000.186] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0000.191] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.195] I> FUSE_OPT_TPC_DISABLE = 0x00000080 [0000.199] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.204] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0000.208] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0000.212] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0000.217] I> FUSE_OPT_FSI_DISABLE = 0x00000000 [0000.221] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.225] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.230] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.234] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.238] I> FUSE_SKU_INFO_0 = 0xd2 [0000.241] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.245] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.249] I> SKU: Prod [0000.251] I> Task: Boost clocks [0000.254] I> Initializing PLLC2 for AXI_CBB. [0000.258] I> AXI_CBB : src = 35, divisor = 0 [0000.262] I> Task: Voltage monitor [0000.266] I> VMON: Vmon re-calibration and fine tuning done [0000.271] I> Task: UPHY init [0000.276] I> HSIO UPHY init done [0000.279] W> Skipping GBE UPHY config [0000.283] I> Task: Boot device init [0000.286] I> Boot_device: QSPI_FLASH instance: 0 [0000.291] I> Qspi clock source : pllc_out0 [0000.295] I> QSPI Flash: Macronix 64MB [0000.298] I> QSPI-0l initialized successfully [0000.302] I> Task: TSC init [0000.305] I> Task: Load membct [0000.308] I> RAM_CODE 0x4000481 [0000.311] I> Loading MEMBCT [0000.314] I> Slot: 1 [0000.316] I> Binary[2] block-66816 (partition size: 0x40000) [0000.322] I> Binary name: MEM-BCT-2 [0000.325] I> Size of crypto header is 8192 [0000.329] I> Size of crypto header is 8192 [0000.333] I> strt_pg_num(66816) num_of_pgs(16) read_buf(0x40050000) [0000.339] I> BCH of MEM-BCT-2 read from storage [0000.343] I> BCH address is : 0x40050000 [0000.347] I> MEM-BCT-2 header integrity check is success [0000.353] I> Binary magic in BCH component 2 is MEM2 [0000.357] I> component binary type is 2 [0000.361] I> strt_pg_num(67062) num_of_pgs(115) read_buf(0x40040000) [0000.368] I> MEM-BCT-2 binary is read from storage [0000.373] I> MEM-BCT-2 binary integrity check is success [0000.378] I> Binary MEM-BCT-2 loaded successfully at 0x40040000 (0xe580) [0000.385] I> RAM_CODE 0x4000481 [0000.390] I> RAM_CODE 0x4000481 [0000.394] I> Task: Load Page retirement list [0000.398] I> Task: SDRAM params override [0000.402] I> Task: Save mem-bct info [0000.405] I> Task: Carveout allocate [0000.408] I> RCM blob carveout will not be allocated [0000.413] I> Update CCPLEX IST carveout from MB1-BCT [0000.418] I> ECC region[0]: Start:0x0, End:0x0 [0000.422] I> ECC region[1]: Start:0x0, End:0x0 [0000.427] I> ECC region[2]: Start:0x0, End:0x0 [0000.431] I> ECC region[3]: Start:0x0, End:0x0 [0000.435] I> ECC region[4]: Start:0x0, End:0x0 [0000.439] I> Non-ECC region[0]: Start:0x80000000, End:0x80000000 [0000.445] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.450] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.455] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.459] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.470] E> BL_CARVEOUT: Failed to allocate memory of size 0x36800000 for CO:44. [0000.478] C> Task 0x20 failed (err: 0x49490303) [0000.482] E> Top caller module: BL_CARVEOUT, error module: BL_CARVEOUT, reason: 0x03, aux_info: 0x03 [0000.491] C> Boot Info Table status dump : 01111111001110001111111111111111 [0000.060] I> MB1 (version: 1.2.0.0-t234-54845784-562369e5) [0000.066] I> t234-A01-0-Silicon (0x12347) Prod [0000.070] I> Boot-mode : Coldboot [0000.073] I> Entry timestamp: 0x00000000 [0000.077] I> last_boot_error: 0x0 [0000.080] I> BR-BCT: preprod_dev_sign: 0 [0000.084] I> rst_source: 0x0, rst_level: 0x0 [0000.088] I> Task: SE error check [0000.091] I> Task: Bootchain select WAR set [0000.095] I> Task: Enable SLCG [0000.098] I> Task: CRC check [0000.101] I> Skip FUSE records CRC check as records_integrity fuse is not burned [0000.108] I> Task: Initialize MB2 params [0000.112] I> MB2-params @ 0x40060000 [0000.116] I> Task: Crypto init [0000.118] I> Task: Perform MB1 KAT tests [0000.122] I> Task: NVRNG health check [0000.126] I> NVRNG: Health check success [0000.130] I> Task: MSS Bandwidth limiter settings for iGPU clients [0000.136] I> Task: Enabling and initialization of Bandwidth limiter [0000.142] I> No request to configure MBWT settings for any PC! [0000.147] I> Task: Secure debug controls [0000.151] I> Task: strap war set [0000.154] I> Task: Initialize SOC Therm [0000.158] I> Task: Program NV master stream id [0000.162] I> Task: Verify boot mode [0000.168] I> Task: Alias fuses [0000.171] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.178] I> Task: Print SKU type [0000.182] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0000.187] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.191] I> FUSE_OPT_TPC_DISABLE = 0x00000080 [0000.195] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.200] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0000.204] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0000.208] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0000.213] I> FUSE_OPT_FSI_DISABLE = 0x00000000 [0000.217] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.221] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.226] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.230] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.234] I> FUSE_SKU_INFO_0 = 0xd2 [0000.237] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.241] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.245] I> SKU: Prod [0000.247] I> Task: Boost clocks [0000.250] I> Initializing PLLC2 for AXI_CBB. [0000.254] I> AXI_CBB : src = 35, divisor = 0 [0000.258] I> Task: Voltage monitor [0000.262] I> VMON: Vmon re-calibration and fine tuning done [0000.267] I> Task: UPHY init [0000.272] I> HSIO UPHY init done [0000.275] W> Skipping GBE UPHY config [0000.278] I> Task: Boot device init [0000.282] I> Boot_device: QSPI_FLASH instance: 0 [0000.286] I> Qspi clock source : pllc_out0 [0000.291] I> QSPI Flash: Macronix 64MB [0000.294] I> QSPI-0l initialized successfully [0000.298] I> Task: TSC init [0000.301] I> Task: Load membct [0000.304] I> RAM_CODE 0x4000401 [0000.307] I> Loading MEMBCT [0000.310] I> Slot: 0 [0000.312] I> Binary[0] block-3840 (partition size: 0x40000) [0000.317] I> Binary name: MEM-BCT-0 [0000.321] I> Size of crypto header is 8192 [0000.325] I> Size of crypto header is 8192 [0000.329] I> strt_pg_num(3840) num_of_pgs(16) read_buf(0x40050000) [0000.335] I> BCH of MEM-BCT-0 read from storage [0000.339] I> BCH address is : 0x40050000 [0000.343] I> MEM-BCT-0 header integrity check is success [0000.348] I> Binary magic in BCH component 0 is MEM0 [0000.353] I> component binary type is 0 [0000.357] I> strt_pg_num(3856) num_of_pgs(115) read_buf(0x40040000) [0000.364] I> MEM-BCT-0 binary is read from storage [0000.368] I> MEM-BCT-0 binary integrity check is success [0000.374] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.380] I> RAM_CODE 0x4000401 [0000.386] I> RAM_CODE 0x4000401 [0000.389] I> Task: Load Page retirement list [0000.393] I> Task: SDRAM params override [0000.397] I> Task: Save mem-bct info [0000.401] I> Task: Carveout allocate [0000.404] I> RCM blob carveout will not be allocated [0000.409] I> Update CCPLEX IST carveout from MB1-BCT [0000.414] I> ECC region[0]: Start:0x0, End:0x0 [0000.418] I> ECC region[1]: Start:0x0, End:0x0 [0000.422] I> ECC region[2]: Start:0x0, End:0x0 [0000.427] I> ECC region[3]: Start:0x0, End:0x0 [0000.431] I> ECC region[4]: Start:0x0, End:0x0 [0000.435] I> Non-ECC region[0]: Start:0x80000000, End:0x880000000 [0000.441] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.446] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.450] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.455] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.466] I> allocated(CO:44) base:0x849800000 size:0x36800000 align: 0x100000 [0000.473] I> allocated(CO:31) base:0x840000000 size:0x8000000 align: 0x8000000 [0000.480] I> allocated(CO:43) base:0x83c000000 size:0x4000000 align: 0x200000 [0000.487] I> allocated(CO:39) base:0x839e00000 size:0x2200000 align: 0x10000 [0000.494] I> allocated(CO:20) base:0x836000000 size:0x2000000 align: 0x2000000 [0000.501] I> allocated(CO:24) base:0x834000000 size:0x2000000 align: 0x2000000 [0000.508] I> allocated(CO:28) base:0x832000000 size:0x2000000 align: 0x2000000 [0000.515] I> allocated(CO:29) base:0x830000000 size:0x2000000 align: 0x2000000 [0000.522] I> allocated(CO:22) base:0x848000000 size:0x1000000 align: 0x1000000 [0000.530] I> allocated(CO:41) base:0x838e00000 size:0x1000000 align: 0x100000 [0000.537] I> allocated(CO:35) base:0x838000000 size:0xe00000 align: 0x10000 [0000.543] I> allocated(CO:02) base:0x849000000 size:0x800000 align: 0x800000 [0000.550] I> allocated(CO:03) base:0x82f800000 size:0x800000 align: 0x800000 [0000.557] I> allocated(CO:06) base:0x82f000000 size:0x800000 align: 0x800000 [0000.564] I> allocated(CO:56) base:0x82e800000 size:0x800000 align: 0x200000 [0000.571] I> allocated(CO:07) base:0x82e400000 size:0x400000 align: 0x400000 [0000.578] I> allocated(CO:33) base:0x82e000000 size:0x400000 align: 0x200000 [0000.585] I> allocated(CO:23) base:0x82de00000 size:0x200000 align: 0x200000 [0000.592] I> allocated(CO:01) base:0x82dd00000 size:0x100000 align: 0x100000 [0000.599] I> allocated(CO:04) base:0x82dc00000 size:0x100000 align: 0x100000 [0000.606] I> allocated(CO:05) base:0x82db00000 size:0x100000 align: 0x100000 [0000.613] I> allocated(CO:08) base:0x82da00000 size:0x100000 align: 0x100000 [0000.620] I> allocated(CO:09) base:0x82d900000 size:0x100000 align: 0x100000 [0000.627] I> allocated(CO:15) base:0x82d800000 size:0x100000 align: 0x100000 [0000.634] I> allocated(CO:17) base:0x82d700000 size:0x100000 align: 0x100000 [0000.641] I> allocated(CO:27) base:0x82d600000 size:0x100000 align: 0x100000 [0000.648] I> allocated(CO:42) base:0x82d500000 size:0x100000 align: 0x100000 [0000.654] I> allocated(CO:54) base:0x82d480000 size:0x80000 align: 0x80000 [0000.661] I> allocated(CO:34) base:0x82d470000 size:0x10000 align: 0x10000 [0000.668] I> allocated(CO:72) base:0x82d270000 size:0x200000 align: 0x10000 [0000.675] I> allocated(CO:47) base:0x82ce00000 size:0x400000 align: 0x200000 [0000.682] I> allocated(CO:48) base:0x82d250000 size:0x20000 align: 0x10000 [0000.689] I> allocated(CO:69) base:0x82d230000 size:0x20000 align: 0x10000 [0000.695] I> allocated(CO:49) base:0x82d220000 size:0x10000 align: 0x10000 [0000.702] I> allocated(CO:50) base:0x82d210000 size:0x10000 align: 0x10000 [0000.709] I> allocated(CO:52) base:0x82d200000 size:0x10000 align: 0x10000 [0000.716] I> NSDRAM base: 0x80000000, end: 0x82d270000, size: 0x7ad270000 [0000.722] I> Task: Thermal check [0000.725] I> max_chip_limit = 105 [0000.728] I> min_chip_limit = -28 [0000.732] I> max temp read = 44 [0000.735] I> min temp read = 43 [0000.738] I> Task: Update FSI SCR with thermal fuse data [0000.743] I> Task: Enable WDT 5th expiry [0000.747] I> Task: I2C register [0000.750] I> Task: Set I2C bus freq [0000.753] I> Task: Reset FSI [0000.756] I> Task: Pinmux init [0000.759] I> Task: Prod config init [0000.762] I> Task: Pad voltage init [0000.766] I> Task: Prod init [0000.768] I> Task: Program rst req config reg [0000.773] I> Task: Common rail init [0000.776] I> DONE: Thermal config [0000.780] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.788] I> DONE: SOC rail config [0000.792] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.798] I> DONE: MEMIO rail config [0000.802] I> DONE: GPU rail info [0000.805] I> DONE: CV rail info [0000.808] I> Task: Mem clock src [0000.811] I> Task: Misc. board config [0000.815] I> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.821] I> Task: SDRAM init [0000.824] I> MemoryType: 4 MemBctRevision: 9 [0000.831] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 9 [0000.838] I> MSS CAR: Init PLLM [0000.841] I> MSS CAR: Init PLLHUB [0000.846] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.858] I> SDRAM initialized! [0000.861] I> SDRAM Size in Total 0x800000000 [0000.865] I> Task: Dram Ecc scrub [0000.868] I> Task: DRAM alias check [0000.896] I> Task: Program NSDRAM carveout [0000.901] I> NSDRAM carveout encryption is enabled [0000.906] I> Program NSDRAM carveout [0000.910] I> Task: Register checker [0000.917] I> Task: Enable clock-mon [0000.931] I> FMON: Fmon re-programming done [0000.936] I> Task: Mapper init [0000.939] I> Task: SC7 Context Init [0000.943] I> Task: CCPLEX IST init [0000.947] I> Task: CPU WP0 [0000.951] I> Loading MCE [0000.953] I> Slot: 0 [0000.956] I> Binary[8] block-22784 (partition size: 0x80000) [0000.962] I> Binary name: MCE [0000.965] I> Size of crypto header is 8192 [0000.970] I> Size of crypto header is 8192 [0000.974] I> strt_pg_num(22784) num_of_pgs(16) read_buf(0x4003e000) [0000.982] I> BCH of MCE read from storage [0000.986] I> BCH address is : 0x4003e000 [0000.991] I> MCE header integrity check is success [0000.996] I> Binary magic in BCH component 0 is MTSM [0001.002] I> component binary type is 8 [0001.006] I> Size of crypto header is 8192 [0001.010] I> strt_pg_num(22800) num_of_pgs(357) read_buf(0x40000000) [0001.020] I> MCE binary is read from storage [0001.025] I> MCE binary integrity check is success [0001.030] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0001.038] I> Size of crypto header is 8192 [0001.053] I> Size of crypto header is 8192 [0001.058] I> Sending WP0 mailbox command to PSC [0001.068] I> Task: XUSB Powergate [0001.071] I> Skipping powergate XUSB. [0001.075] I> Task: MB1 fixed firewalls [0001.091] W> Firewall readback mismatch [0001.102] I> Task: Load bpmp-fw [0001.105] I> Slot: 0 [0001.108] I> Binary[15] block-9984 (partition size: 0x180000) [0001.114] I> Binary name: BPMP_FW [0001.118] I> Size of crypto header is 8192 [0001.122] I> Size of crypto header is 8192 [0001.127] I> strt_pg_num(9984) num_of_pgs(16) read_buf(0x807fe000) [0001.135] I> BCH of BPMP_FW read from storage [0001.139] I> BCH address is : 0x807fe000 [0001.145] I> BPMP_FW header integrity check is success [0001.150] I> Binary magic in BCH component 0 is BPMF [0001.155] I> component binary type is 15 [0001.160] I> Size of crypto header is 8192 [0001.164] I> strt_pg_num(10000) num_of_pgs(2037) read_buf(0x80000000) [0001.183] I> BPMP_FW binary is read from storage [0001.190] I> BPMP_FW binary integrity check is success [0001.195] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfea00) [0001.203] I> Slot: 0 [0001.206] I> Binary[16] block-13056 (partition size: 0x400000) [0001.213] I> Binary name: BPMP_FW_DTB [0001.216] I> Size of crypto header is 8192 [0001.221] I> Size of crypto header is 8192 [0001.225] I> strt_pg_num(13056) num_of_pgs(16) read_buf(0x807fc000) [0001.233] I> BCH of BPMP_FW_DTB read from storage [0001.238] I> BCH address is : 0x807fc000 [0001.244] I> BPMP_FW_DTB header integrity check is success [0001.249] I> Binary magic in BCH component 0 is BPMD [0001.255] I> component binary type is 16 [0001.259] I> Size of crypto header is 8192 [0001.264] I> strt_pg_num(13072) num_of_pgs(493) read_buf(0x807be5f0) [0001.274] I> BPMP_FW_DTB binary is read from storage [0001.280] I> BPMP_FW_DTB binary integrity check is success [0001.286] I> Binary BPMP_FW_DTB loaded successfully at 0x807be5f0 (0x3d840) [0001.295] I> Task: Load psc-fw [0001.299] I> Slot: 0 [0001.301] I> Binary[17] block-21248 (partition size: 0xc0000) [0001.308] I> Binary name: PSC_FW [0001.311] I> Size of crypto header is 8192 [0001.316] I> Size of crypto header is 8192 [0001.320] I> strt_pg_num(21248) num_of_pgs(16) read_buf(0x80ffe000) [0001.328] I> BCH of PSC_FW read from storage [0001.333] I> BCH address is : 0x80ffe000 [0001.338] I> PSC_FW header integrity check is success [0001.343] I> Binary magic in BCH component 0 is PFWP [0001.348] I> component binary type is 17 [0001.353] I> Size of crypto header is 8192 [0001.357] I> strt_pg_num(21264) num_of_pgs(717) read_buf(0x80fa4600) [0001.369] I> PSC_FW binary is read from storage [0001.375] I> PSC_FW binary integrity check is success [0001.380] I> Binary PSC_FW loaded successfully at 0x80fa4600 (0x59980) [0001.389] I> Task: Load nvdec-fw [0001.392] I> Slot: 0 [0001.395] I> Binary[7] block-6400 (partition size: 0x100000) [0001.401] I> Binary name: NVDEC [0001.404] I> Size of crypto header is 8192 [0001.409] I> Size of crypto header is 8192 [0001.413] I> strt_pg_num(6400) num_of_pgs(16) read_buf(0x800fe000) [0001.421] I> BCH of NVDEC read from storage [0001.426] I> BCH address is : 0x800fe000 [0001.431] I> NVDEC header integrity check is success [0001.436] I> Binary magic in BCH component 0 is NDEC [0001.442] I> component binary type is 7 [0001.446] I> Size of crypto header is 8192 [0001.450] I> strt_pg_num(6416) num_of_pgs(560) read_buf(0x80000000) [0001.461] I> NVDEC binary is read from storage [0001.467] I> NVDEC binary integrity check is success [0001.472] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0001.480] I> Size of crypto header is 8192 [0001.500] I> Task: Load tsec-fw [0001.504] I> TSEC-FW load support not enabled [0001.508] I> Task: GPIO interrupt map [0001.513] I> Task: SC7 context save [0001.516] I> Slot: 0 [0001.519] I> Binary[27] block-0 (partition size: 0x100000) [0001.525] I> Binary name: BR_BCT [0001.528] I> Size of crypto header is 8192 [0001.533] I> Size of crypto header is 8192 [0001.537] I> strt_pg_num(0) num_of_pgs(16) read_buf(0xa0000000) [0001.545] I> BR_BCT binary is read from storage [0001.550] I> BR_BCT binary integrity check is success [0001.555] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.563] I> Slot: 0 [0001.565] I> Binary[13] block-23808 (partition size: 0x30000) [0001.572] I> Binary name: SC7-FW [0001.575] I> Size of crypto header is 8192 [0001.580] I> Size of crypto header is 8192 [0001.584] I> Size of crypto header is 8192 [0001.589] I> strt_pg_num(23808) num_of_pgs(16) read_buf(0xa0002000) [0001.597] I> BCH of SC7-FW read from storage [0001.601] I> BCH address is : 0xa0002000 [0001.607] I> SC7-FW header integrity check is success [0001.612] I> Binary magic in BCH component 0 is WB0B [0001.617] I> component binary type is 13 [0001.622] I> Size of crypto header is 8192 [0001.626] I> strt_pg_num(23824) num_of_pgs(345) read_buf(0xa0004000) [0001.636] I> SC7-FW binary is read from storage [0001.641] I> SC7-FW binary integrity check is success [0001.647] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x2b0e0) [0001.655] I> Slot: 0 [0001.657] I> Binary[22] block-24192 (partition size: 0x30000) [0001.664] I> Binary name: PSC_RF [0001.667] I> Size of crypto header is 8192 [0001.672] I> Size of crypto header is 8192 [0001.676] I> Size of crypto header is 8192 [0001.681] I> strt_pg_num(24192) num_of_pgs(16) read_buf(0xa002f0e0) [0001.689] I> BCH of PSC_RF read from storage [0001.693] I> BCH address is : 0xa002f0e0 [0001.699] I> PSC_RF header integrity check is success [0001.704] I> Binary magic in BCH component 0 is PSCR [0001.709] I> component binary type is 22 [0001.713] I> Size of crypto header is 8192 [0001.718] I> strt_pg_num(24208) num_of_pgs(223) read_buf(0xa00310e0) [0001.727] I> PSC_RF binary is read from storage [0001.733] I> PSC_RF binary integrity check is success [0001.738] I> Binary PSC_RF loaded successfully at 0xa00310e0 (0x1bdd0) [0001.761] I> Task: Save WP0 payload to SC7 ctx [0001.766] I> Task: Load MB2rf binary to SC7 ctx [0001.771] I> Slot: 0 [0001.773] I> Binary[14] block-24576 (partition size: 0x20000) [0001.780] I> Binary name: MB2_RF [0001.783] I> Size of crypto header is 8192 [0001.788] I> Size of crypto header is 8192 [0001.792] I> Size of crypto header is 8192 [0001.797] I> strt_pg_num(24576) num_of_pgs(16) read_buf(0xa00d6a88) [0001.805] I> BCH of MB2_RF read from storage [0001.809] I> BCH address is : 0xa00d6a88 [0001.815] I> MB2_RF header integrity check is success [0001.820] I> Binary magic in BCH component 0 is MB2R [0001.825] I> component binary type is 14 [0001.829] I> Size of crypto header is 8192 [0001.834] I> strt_pg_num(24592) num_of_pgs(224) read_buf(0xa00d8a88) [0001.843] I> MB2_RF binary is read from storage [0001.849] I> MB2_RF binary integrity check is success [0001.854] I> Binary MB2_RF loaded successfully at 0xa00d8a88 (0x1bf80) [0001.862] I> Task: Save fuse alias data to SC7 ctx [0001.867] I> Task: Save PMIC data to SC7 ctx [0001.872] I> Task: Save Pinmux data to SC7 ctx [0001.876] I> Task: Save Pad Voltage data to SC7 ctx [0001.882] I> Task: Save controller prod data to SC7 ctx [0001.887] I> Task: Save prod cfg data to SC7 ctx [0001.892] I> Task: Save I2C bus freq data to SC7 ctx [0001.897] I> Task: Save SOCTherm data to SC7 ctx [0001.902] I> Task: Save FMON data to SC7 ctx [0001.907] I> Task: Save VMON data to SC7 ctx [0001.911] I> Task: Save TZDRAM data to SC7 ctx [0001.916] I> Task: Save GPIO int data to SC7 ctx [0001.921] I> Task: Save clock data to SC7 ctx [0001.926] I> Task: Save debug data to SC7 ctx [0001.930] I> Task: Save MBWT data to SC7 ctx [0001.939] I> SC7 context save done [0001.943] I> Task: Load MB2/Applet/FSKP [0001.947] I> Loading MB2 [0001.950] I> Slot: 0 [0001.953] I> Binary[6] block-8448 (partition size: 0x80000) [0001.959] I> Binary name: MB2 [0001.962] I> Size of crypto header is 8192 [0001.967] I> Size of crypto header is 8192 [0001.971] I> strt_pg_num(8448) num_of_pgs(16) read_buf(0x8007e000) [0001.979] I> BCH of MB2 read from storage [0001.983] I> BCH address is : 0x8007e000 [0001.989] I> MB2 header integrity check is success [0001.994] I> Binary magic in BCH component 0 is MB2B [0001.999] I> component binary type is 6 [0002.003] I> Size of crypto header is 8192 [0002.008] I> strt_pg_num(8464) num_of_pgs(841) read_buf(0x80000000) [0002.020] I> MB2 binary is read from storage [0002.026] I> MB2 binary integrity check is success [0002.031] I> Binary MB2 loaded successfully at 0x80000000 (0x691f0) [0002.039] I> Task: Map CCPLEX SHARED carveout [0002.044] I> Task: Prepare MB2 params [0002.049] I> BR-BCT Boot Chain Fields [0002.053] I> u32_non_gpio_select_boot_chain : 0 [0002.058] I> u32_num_boot_chains : 2 [0002.063] I> bf_bl_gpio_select_boot_chain_1b : 0 [0002.068] I> Task: Dram ecc test [0002.072] I> Task: Misc NV security settings [0002.076] I> NVDEC sticky bits programming done [0002.081] I> Successfully powergated NVDEC [0002.086] I> Task: Disable/Reload WDT [0002.090] I> Task: Program misc carveouts [0002.094] I> Program IPC carveouts [0002.102] I> SLCG Global override status := 0x0 [0002.107] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-4d0906e6) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x0020af3b I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x82e800000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50002034) I> Task: Enable hot-plug capability (0x50028064) I> Task: PSC mailbox init (0x500178b0) I> Task: Crypto init (0x5000675c) I> Task: Enable GP-SE clock (0x50002198) I> Task: DICE Identity init (0x5001af00) I> DICE is not enabled. I> Task: Measured Boot init (0x5001b674) I> Task: OEM SC7 context save init (0x5001a600) I> Task: I2C register (0x50001ff8) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001fe0) I> Task: Program CBB PCIE AMAP regions (0x5001ac14) I> Task: Boot device init (0x50001f28) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001f24) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 15 partitions in SDMMC_USER (instance 3) I> Task: Load and authenticate registered FWs (0x5001e198) I> Task: Load AUXP FWs (0x50027c04) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x82da00000 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x82d700000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x836000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9528928 bytes I> dce: plain binary integrity check is success I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x836000000 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x82e400000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x82db00000 I> Task: Carveout setup (0x500208f8) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x50017784) I> Task: Enable FSI VMON (0x50017280) I> FSI VMON: FSI Vmon re-calibration and fine tuning done I> Task: Validate FSI Therm readings (0x50017364) I> FSITHERM max temp = 44 I> FSITHERM min temp = 44 I> Task: Restore XUSB sec (0x50001ef8) I> Task: Enable FSI SE clock (0x50017d0c) I> Enable FSI-SE clock and 10ms delay... I> Task: Initialize SBSA UART CAR (0x500020fc) I> Task: Initialize CPUBL Params (0x50018cf8) I> CPUBL-params @ 0x832000000 I> Task: Ratchet update (0x50029100) W> Skip ratchet update - OPTIN fuse not set I> Task: Prepare eeprom data (0x50018ac4) I> Task: Revoke PKC fuse (0x50001d44) I> PKC revoke fuse burn not requested I> Task: FSI padctl context save (0x5001a790) I> Task: Unpowergate APE (0x50018474) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: OEM firewalls (0x50024d68) I> OEM firewalls configured I> Task: Powergate APE (0x500185e8) I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings (0x500251bc) I> Task: Unhalt AUXPs (0x50027e6c) I> Unhalting SPE.. I> Enabling combined UART spe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 5243985d1b1eb3f06fac6d36bd7e74ac spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler I> Task: Trigger mailbox for PSC-BL1 exit (0x50017930) I> Sending opcode 0x4d420802 to psc FO: Entering psc_monitor_init! INFO: GSC22 BOM:0x848002000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: 8a33b23-73b589c-8a15f76-rel-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 Received ACK from psc I> TasFO: MONITOR: user task addr:0x848022000, blob offset:0x00020000 INFO: MONITOR: populated user images:13 INFO: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_init... INFO: enter idle task. pmp: socket 0 bpmp: base binary md5 is 925eece486b7c46d91aa449178b5d322 bpmp: combined binary md5 is 6969245516d6bf7e0f2306a6a1fbec5c bpmp: firmware tag is 6969245516d6bf7e0f23-925eece486b initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator Start secure NOR provision (0x5001aa2c) I> Task: Load FSI keyblob (0x50017d54) I> Skipping FSI key blob copy I> Task: Unhalt AUitialized avfs_clk_platform initialized powergate s (0x50027e74) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unitialized dvs initialized clk_mach_config initialized pm initialized suspend initialized strap initialized mce_dbell l 2.542592] Camera-FW on t234-rce-safe started TCU early console enabled. successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x50018e1c) I> Task: Load TOS (0x50019580) I> Task: Load and authenticate registered FWs (0x5001e198) Partition name: A_cpu-bootloader I> Size of partition: 3670016 I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloader itialized emc initialized emc_mrq initialized clk_cal initialized uphy_dt initialized uphy_mrq HSIO UPHY reset has been de-asserted 0x0 initialized uphy Partition name: A_secitialized pg_late eitialized pg_mrq_init swdtimer_init: reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq s I> Size of partition: 4194304 I> Binary@ dssing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ice:3/0 block-32000 (partition size: 0x400000), name: A_secure-os I> MB2-params @ 0x40060000 I> cpubl_params: nsdram: carveout: 1, encryption: 1 I> NSDRAM carveout base: 0x80000000, size: 0x7ad270000 I> cpubl: Authentiitialized clk_cal_late initialized noc_late initialized cvc tion Finalize Done I> Binary cpitialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable pwm3 enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable pllc4_muxed enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp enable sdmmc_legacy_tm initialized clk_mach_post initialized pg_post initialized regulator_post initializ 2.715619] Camera-FW on t234-rce-safe ready SHA1=8676d22a (crt 12.946 ms, profile initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete otal boot 187.033 ms) l loaded successfully at 0x82ce00000 I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x83fdee000 I> Relocating OP-TEE dtb from: 0x83fefec50 to 0x83c000020, size: 0x2106 I> [0] START: 0x80000000, SIZE: 0x7ad270000 I> [1] START: 0x832000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x82e800400 I> EKB detected (length: 0x410) @ VA:0x82e800400 I> Task: Prepare TOS params (0x500194f8) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x83c000020 I> Task: OEM SC7 context save (0x5001a88c) I> OEM sc7 context saved I> Task: Disable MSS perf stats (0x50027f00) I> Task: Program display sticky bits (0x50027e7c) I> Task: Storage device deinit (0x500020a0) I> Task: SMMU external bypass disable (0x50017894) I> Task: SMMU init (0x500177b0) I> Task: Program GICv3 registers (0x50027fa0) I> Task: Audit firewall settings (0x50024fbc) I> Task: Bootchain failure check (0x500025e8) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished TICE: BL31: v2.6(release):346877e39 NOTICE: BL31: Built : 12:32:40, Aug 1 2023 I/TC: Physical secure memory base 0x83c040000 size 0x3fc0000 E: FW Boot Done TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.21 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Aug 1 19:39:55 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Test OEM keys are being used. This is insecure for shipping products! I/TC: Primary CPU switching to normal world boot etson UEFI firmware (version 4.1-33958178 built on 2023-08-01T19:34:02+00:00) TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled TC:?? 00 get_rpc_alloc_res:645 RPC allocation failed. Non-secure world result: ret=0xffff0000 ret_origin=0 E/LD: init_elf:486 sys_open_ta_bin(bc50d971-d4c9-42c4-82cb-343fb7f37896) E/TC:?? 00 ldelf_init_with_ldelf:131 ldelf failed with res: 0xffff000c 3h Jetson UEFI firmware (version 4.1-33958178 built on 2023-08-01T19:34:02+00:00) ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ** WARNING: Test Key is used. ** ...... L4TLauncher: Attempting Direct Boot L4T boot options 0: primary kernel 1: backup kernel Press 0-1 to boot selection within 3.0 seconds. Press any other key to boot default (Option: 0) EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.120-tegra (ubuntu@cztek-ubuntu) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #2 SMP PREEMPT Thu Nov 9 19:43:50 CST 2023 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: Jetson AGX Orin [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x82531e718 SMBIOS=0xffff0000 SMBIOS 3.0=0x8061a0000 MEMATTR=0x806825018 ESRT=0x80618c498 RNG=0x806d2f198 MEMRESERVE=0x806827f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000080618c498 to 0x000000080618c4d0. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000818c00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000833ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000804857fff] [ 0.000000] node 0: [mem 0x0000000804858000-0x0000000804a37fff] [ 0.000000] node 0: [mem 0x0000000804a38000-0x000000080607ffff] [ 0.000000] node 0: [mem 0x0000000806080000-0x00000008060cffff] [ 0.000000] node 0: [mem 0x00000008060d0000-0x000000080612ffff] [ 0.000000] node 0: [mem 0x0000000806130000-0x000000080617ffff] [ 0.000000] node 0: [mem 0x0000000806180000-0x000000080618ffff] [ 0.000000] node 0: [mem 0x0000000806190000-0x00000008061affff] [ 0.000000] node 0: [mem 0x00000008061b0000-0x00000008066dffff] [ 0.000000] node 0: [mem 0x00000008066e0000-0x000000080677ffff] [ 0.000000] node 0: [mem 0x0000000806780000-0x00000008067fffff] [ 0.000000] node 0: [mem 0x0000000806800000-0x000000080681ffff] [ 0.000000] node 0: [mem 0x0000000806820000-0x000000080683ffff] [ 0.000000] node 0: [mem 0x0000000806840000-0x000000080685ffff] [ 0.000000] node 0: [mem 0x0000000806860000-0x000000080693ffff] [ 0.000000] node 0: [mem 0x0000000806940000-0x000000080695ffff] [ 0.000000] node 0: [mem 0x0000000806960000-0x000000080698ffff] [ 0.000000] node 0: [mem 0x0000000806990000-0x0000000806b6ffff] [ 0.000000] node 0: [mem 0x0000000806b70000-0x0000000806c3ffff] [ 0.000000] node 0: [mem 0x0000000806c40000-0x0000000806cdffff] [ 0.000000] node 0: [mem 0x0000000806ce0000-0x0000000806d1ffff] [ 0.000000] node 0: [mem 0x0000000806d20000-0x0000000806faffff] [ 0.000000] node 0: [mem 0x0000000806fb0000-0x00000008070affff] [ 0.000000] node 0: [mem 0x00000008070b0000-0x000000080714ffff] [ 0.000000] node 0: [mem 0x0000000807150000-0x000000080719ffff] [ 0.000000] node 0: [mem 0x00000008071a0000-0x000000080723ffff] [ 0.000000] node 0: [mem 0x0000000807240000-0x000000080775ffff] [ 0.000000] node 0: [mem 0x0000000807760000-0x000000080793ffff] [ 0.000000] node 0: [mem 0x0000000807940000-0x0000000828faffff] [ 0.000000] node 0: [mem 0x0000000828fb0000-0x0000000828ffffff] [ 0.000000] node 0: [mem 0x0000000829000000-0x000000082d1fffff] [ 0.000000] node 0: [mem 0x000000082d210000-0x000000082d21ffff] [ 0.000000] node 0: [mem 0x0000000832000000-0x0000000833ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000833ffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90328 r8192 d32552 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 7931152 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 console=tty0 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 nospectre_bhb [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 31053772K/32229440K available (18560K kernel code, 3166K rwdata, 7168K rodata, 3968K init, 1416K bss, 913524K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000002] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000809] Console: colour dummy device 80x25 [ 0.000991] printk: console [tty0] enabled [ 0.001036] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001046] pid_max: default: 32768 minimum: 301 [ 0.001152] LSM: Security Framework initializing [ 0.001180] Yama: becoming mindful. [ 0.001201] SELinux: Initializing. [ 0.001309] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.001354] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.003236] rcu: Hierarchical SRCU implementation. [ 0.003347] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.004118] DTS File Name: [ 0.004126] DTB Build time: [ 0.005591] Tegra Revision: A01 SKU: 0xd2 CPU Process: 0 SoC Process: 0 [ 0.005753] Remapping and enabling EFI services. [ 0.006291] smp: Bringing up secondary CPUs ... [ 0.035023] Detected PIPT I-cache on CPU1 [ 0.035073] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.035110] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.063788] Detected PIPT I-cache on CPU2 [ 0.063798] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.063813] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.092429] Detected PIPT I-cache on CPU3 [ 0.092438] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.092453] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.123133] Detected PIPT I-cache on CPU4 [ 0.123156] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.123181] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.151860] Detected PIPT I-cache on CPU5 [ 0.151870] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.151885] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.180525] Detected PIPT I-cache on CPU6 [ 0.180535] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.180550] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.209189] Detected PIPT I-cache on CPU7 [ 0.209199] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.209213] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.209271] smp: Brought up 1 node, 8 CPUs [ 0.209317] SMP: Total of 8 processors activated. [ 0.209322] CPU features: detected: Privileged Access Never [ 0.209324] CPU features: detected: LSE atomic instructions [ 0.209327] CPU features: detected: User Access Override [ 0.209329] CPU features: detected: 32-bit EL0 Support [ 0.209333] CPU features: detected: Common not Private translations [ 0.209336] CPU features: detected: RAS Extension Support [ 0.209338] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.209342] CPU features: detected: CRC32 instructions [ 0.209345] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.227729] spectre-bhb mitigation disabled by command line option [ 0.245303] CPU: All CPU(s) started at EL2 [ 0.247765] devtmpfs: initialized [ 0.268194] Registered cp15_barrier emulation handler [ 0.268209] Registered setend emulation handler [ 0.268216] KASLR enabled [ 0.268345] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.268358] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.270009] pinctrl core: initialized pinctrl subsystem [ 0.270468] SMBIOS 3.0.0 present. [ 0.270477] DMI: Unknown Jetson AGX Orin Developer Kit/Jetson AGX Orin Developer Kit, BIOS 4.1-33958178 08/01/2023 [ 0.270811] NET: Registered protocol family 16 [ 0.271506] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.271713] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.271911] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.271938] audit: initializing netlink subsys (disabled) [ 0.272024] audit: type=2000 audit(0.268:1): state=initialized audit_enabled=0 res=1 [ 0.272216] thermal_sys: Registered thermal governor 'step_wise' [ 0.272218] thermal_sys: Registered thermal governor 'power_allocator' [ 0.272224] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.274856] cpuidle: using governor menu [ 0.274968] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.275052] ASID allocator initialised with 32768 entries [ 0.275156] Serial: AMBA PL011 UART driver [ 0.277146] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.277174] Tegra reboot handler registered. [ 0.298515] mc: mapped MMIO address: 0xffff800011110000 -> 0x2c10000 [ 0.298527] mc: mapped MMIO address: 0xffff800011130000 -> 0x2c20000 [ 0.298535] mc: mapped MMIO address: 0xffff800011150000 -> 0x2c30000 [ 0.298543] mc: mapped MMIO address: 0xffff800011170000 -> 0x2c40000 [ 0.298550] mc: mapped MMIO address: 0xffff800011190000 -> 0x2c50000 [ 0.298560] mc: mapped MMIO address: 0xffff8000111b0000 -> 0x2b80000 [ 0.298567] mc: mapped MMIO address: 0xffff8000111d0000 -> 0x2b90000 [ 0.298573] mc: mapped MMIO address: 0xffff8000111f0000 -> 0x2ba0000 [ 0.298582] mc: mapped MMIO address: 0xffff800011210000 -> 0x2bb0000 [ 0.298588] mc: mapped MMIO address: 0xffff800011230000 -> 0x1700000 [ 0.298594] mc: mapped MMIO address: 0xffff800011250000 -> 0x1710000 [ 0.298600] mc: mapped MMIO address: 0xffff800011270000 -> 0x1720000 [ 0.298607] mc: mapped MMIO address: 0xffff800011290000 -> 0x1730000 [ 0.298614] mc: mapped MMIO address: 0xffff8000112b0000 -> 0x1740000 [ 0.298625] mc: mapped MMIO address: 0xffff8000112d0000 -> 0x1750000 [ 0.298631] mc: mapped MMIO address: 0xffff8000112f0000 -> 0x1760000 [ 0.298637] mc: mapped MMIO address: 0xffff800011310000 -> 0x1770000 [ 0.298648] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.298692] mc-err: mcerr ops are set to t23x [ 0.299383] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 60, base_baud = 0) is a SBSA [ 1.455198] printk: console [ttyAMA0] enabled [ 1.463940] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.470656] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 1.477356] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.484056] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.492823] ACPI: Interpreter disabled. [ 1.497848] vdd-av1v1-hub: supplied by vdd-5v-sys [ 1.502698] vbusA-cvb: supplied by vdd-5v-sys [ 1.507165] vbusB-cvb: supplied by vdd-5v-sys [ 1.511606] vdd-dp: supplied by vdd-3v3-sys [ 1.515939] vdd-usbc1-vbus: supplied by vdd-5v-sys [ 1.520947] vdd-usbc2-vbus: supplied by vdd-5v-sys [ 1.525963] dsi-vdd-1v8-bl-en: supplied by vdd-1v8-sys [ 1.531448] iommu: Default domain type: Translated [ 1.536383] eventlib_kernel: keventlib is initialized, test id: 0 [ 1.542706] SCSI subsystem initialized [ 1.546537] usbcore: registered new interface driver usbfs [ 1.552035] usbcore: registered new interface driver hub [ 1.557355] usbcore: registered new device driver usb [ 1.562596] mc: Linux media interface: v0.10 [ 1.566872] videodev: Linux video capture interface: v2.00 [ 1.572502] pps_core: LinuxPPS API ver. 1 registered [ 1.577463] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.586602] PTP clock support registered [ 1.590755] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 1.597911] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 1.605575] Registered efivars operations [ 1.609733] FPGA manager framework [ 1.613161] Advanced Linux Sound Architecture Driver Initialized. [ 1.619539] Bluetooth: Core ver 2.22 [ 1.623120] NET: Registered protocol family 31 [ 1.627562] Bluetooth: HCI device and connection manager initialized [ 1.633918] Bluetooth: HCI socket layer initialized [ 1.638794] Bluetooth: L2CAP socket layer initialized [ 1.643855] Bluetooth: SCO socket layer initialized [ 1.649246] camchar: rtcpu character device driver loaded [ 1.654881] clocksource: Switched to clocksource arch_sys_counter [ 1.823246] VFS: Disk quotas dquot_6.6.0 [ 1.827211] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.834388] pnp: PnP ACPI: disabled [ 1.839850] la/ptsa driver initialized. [ 1.843751] NET: Registered protocol family 2 [ 1.848315] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.858098] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 1.866841] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.875124] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.883038] TCP: Hash tables configured (established 262144 bind 65536) [ 1.889751] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 1.896686] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 1.904149] NET: Registered protocol family 1 [ 1.908783] RPC: Registered named UNIX socket transport module. [ 1.914710] RPC: Registered udp transport module. [ 1.919414] RPC: Registered tcp transport module. [ 1.924115] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.930564] PCI: CLS 0 bytes, default 64 [ 1.934638] Trying to unpack rootfs image as initramfs... [ 2.069300] Freeing initrd memory: 9552K [ 2.075389] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 2.083308] kvm [1]: IPA Size Limit: 48 bits [ 2.087632] kvm [1]: GICv3: no GICV resource entry [ 2.092424] kvm [1]: disabling GICv2 emulation [ 2.096884] kvm [1]: GIC system register CPU interface enabled [ 2.102787] kvm [1]: vgic interrupt IRQ9 [ 2.106826] kvm [1]: VHE mode initialized successfully [ 2.112629] Initialise system trusted keyrings [ 2.117216] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 2.125992] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.132184] NFS: Registering the id_resolver key type [ 2.137264] Key type id_resolver registered [ 2.141447] Key type id_legacy registered [ 2.145490] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.152196] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.159605] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.175980] NET: Registered protocol family 38 [ 2.180428] Key type asymmetric registered [ 2.184524] Asymmetric key parser 'x509' registered [ 2.189419] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239) [ 2.196880] io scheduler mq-deadline registered [ 2.201414] io scheduler kyber registered [ 2.208841] tegra234-pinctrl 2430000.pinmux: there is not valid maps for state drive [ 2.216595] tegra234-pinctrl 2430000.pinmux: there is not valid maps for state unused [ 2.226865] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 2.232463] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 2.238052] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 2.243638] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 2.251830] tegra_dc_assign_hw_data: no matching compatible node [ 2.257840] tegradccommon module_init failed [ 2.262107] tegradc module_init failed [ 2.266105] EINJ: ACPI disabled. [ 2.271066] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 2.277946] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 2.283270] tegra-pmc: ### PMC reset level: L0 [ 2.287716] tegra-pmc: ### PMC reset status reg: 0x0 [ 2.294033] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.881404] printk: console [ttyTCU0] enabled [ 3.890560] arm-smmu 12000000.iommu: probing hardware configuration... [ 3.898594] arm-smmu 12000000.iommu: SMMUv2 with: [ 3.903429] arm-smmu 12000000.iommu: stage 1 translation [ 3.908974] arm-smmu 12000000.iommu: stage 2 translation [ 3.914511] arm-smmu 12000000.iommu: nested translation [ 3.919966] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 3.927373] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 3.936434] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 3.943126] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 3.949816] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 3.957328] arm-smmu 10000000.iommu: probing hardware configuration... [ 3.964017] arm-smmu 10000000.iommu: SMMUv2 with: [ 3.968837] arm-smmu 10000000.iommu: stage 1 translation [ 3.974369] arm-smmu 10000000.iommu: stage 2 translation [ 3.979904] arm-smmu 10000000.iommu: nested translation [ 3.985350] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 3.992748] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 4.001753] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 4.008446] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.015125] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.022242] arm-smmu 8000000.iommu: probing hardware configuration... [ 4.028847] arm-smmu 8000000.iommu: SMMUv2 with: [ 4.033576] arm-smmu 8000000.iommu: stage 1 translation [ 4.039015] arm-smmu 8000000.iommu: stage 2 translation [ 4.044464] arm-smmu 8000000.iommu: nested translation [ 4.049818] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 4.057134] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 4.065998] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 4.072606] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.079206] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.086501] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 4.096244] tegra_profiler: version: 1.151, samples/io: 51/30 [ 4.102214] tegra_profiler: auth: init [ 4.106371] nvsciipc: loaded module [ 4.111499] tun: Universal TUN/TAP device driver, 1.6 [ 4.117134] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 4.124543] hns3: Copyright (c) 2017 Huawei Corporation. [ 4.130015] e1000e: Intel(R) PRO/1000 Network Driver [ 4.135097] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.141183] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.146711] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.152575] PPP generic driver version 2.4.2 [ 4.156991] PPP BSD Compression module registered [ 4.161818] PPP Deflate Compression module registered [ 4.167003] PPP MPPE Compression module registered [ 4.171941] usbcore: registered new interface driver r8152 [ 4.177576] usbcore: registered new interface driver asix [ 4.183120] usbcore: registered new interface driver ax88179_178a [ 4.189375] usbcore: registered new interface driver cdc_ether [ 4.195366] usbcore: registered new interface driver net1080 [ 4.201176] usbcore: registered new interface driver cdc_subset [ 4.207256] usbcore: registered new interface driver zaurus [ 4.212980] usbcore: registered new interface driver cdc_ncm [ 4.218791] usbcore: registered new interface driver aqc111 [ 4.224615] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.230960] ohci-pci: OHCI PCI platform driver [ 4.235535] ohci-platform: OHCI generic platform driver [ 4.241179] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 4.247578] usbcore: registered new interface driver uas [ 4.253053] usbcore: registered new interface driver usb-storage [ 4.259359] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 4.265465] mousedev: PS/2 mouse device common for all mice [ 4.271207] usbcore: registered new interface driver xpad [ 4.278635] tegra_rtc c2a0000.rtc: registered as rtc1 [ 4.284092] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:01:47 UTC (107) [ 4.292403] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.298803] i2c /dev entries driver [ 4.302479] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 4.308279] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 4.313969] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 4.319646] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 4.325324] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 4.330992] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 4.336653] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 4.342326] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 4.352960] device-mapper: uevent: version 1.0.3 [ 4.357794] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 4.367564] sdhci: Secure Digital Host Controller Interface driver [ 4.373906] sdhci: Copyright(c) Pierre Ossman [ 4.378381] Synopsys Designware Multimedia Card Interface Driver [ 4.384606] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.390552] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 4.390898] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 4.404590] tegra-bpmp bpmp: firmware: 6969245516d6bf7e0f23-925eece486b [ 4.414735] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 4.420734] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x81 [ 4.431887] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 4.437827] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful bugfs initialized 5.673657] hid: raw HID events driver (C) Jiri Kosina [ 5.679457] usbcore: registered new interface driver usbhid [ 5.685190] usbhid: USB HID core driver [ 5.689907] tegra-dce d800000.dce: Adding to iommu group 4 [ 5.696887] dce: dce_ipc_channel_init:319 Invalid Channel State [0x0] for ch_type [2] [ 5.705708] tegra234-aon c000000.aon: Adding to iommu group 5 [ 5.712316] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 5.719682] c000000.aon:hsp: probed [ 5.721290] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [0]. Ignored... [ 5.721296] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 5.733724] tegra234-aon c000000.aon: init done [ 5.742701] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 5.747830] tegra23x-psc e860000.psc: Adding to iommu group 6 [ 5.754375] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x1] [ 5.760517] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 5.769088] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [1] ... [ 5.769090] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored... [ 5.775539] tegra23x-psc e860000.psc: init done [ 5.783946] dce: dce_admin_setup_clients_ipc:529 Get queue info failed for [2] [ 5.784078] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 5.793205] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 7 [ 5.797384] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [3] ... [ 5.797385] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 5.797396] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 5.805555] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 5.813880] dce: dce_start_boot_flow:173 DCE_BOOT_DONE [ 5.824052] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 5.869380] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 5.881064] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 5.892769] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 5.904576] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 5.917183] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 5.930029] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 5.943064] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (110) [ 5.949929] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 5.960954] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=8676d22a01443bdbc66581b7dde3b6d6828cc925 [ 5.974959] t19x_cache tegra-cache: probed [ 5.979521] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 5.994895] optee: probing for conduit method. TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled 5.999502] optee: revision 3.21 (d8269f24) [ 6.058256] optee: dynamic shared memory is enabled [ 6.067695] optee: initialized driver [ 6.088699] nvpmodel: initialized successfully [ 6.093429] tegra_hv: get_hvd: not initialized yet [ 6.098380] user_ivc_mempool: hypervisor not present [ 6.104683] usbcore: registered new interface driver snd-usb-audio [ 6.112083] u32 classifier [ 6.114866] input device check on [ 6.118649] Actions configured [ 6.122301] Initializing XFRM netlink socket [ 6.127192] NET: Registered protocol family 10 [ 6.133396] Segment Routing with IPv6 [ 6.137218] NET: Registered protocol family 17 [ 6.141812] NET: Registered protocol family 15 [ 6.146459] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 6.160011] Bluetooth: RFCOMM socket layer initialized [ 6.165320] Bluetooth: RFCOMM ver 1.11 [ 6.169196] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 6.175288] Bluetooth: HIDP socket layer initialized [ 6.181094] 9pnet: Installing 9P2000 support [ 6.185558] Key type dns_resolver registered [ 6.190724] registered taskstats version 1 [ 6.194955] Loading compiled-in X.509 certificates [ 6.210825] Loaded X.509 cert 'Build time autogenerated kernel key: d2d09af985b2926711d13403133bd325b1a46606' [ 6.221806] tegra194-pcie 14100000.pcie: Adding to iommu group 8 [ 6.234826] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.243595] tegra194-pcie 14160000.pcie: Adding to iommu group 9 [ 6.255933] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 6.263129] tegra194-pcie 141a0000.pcie: Adding to iommu group 10 [ 6.275215] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 6.310047] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 11 [ 6.320739] host1x 13e40000.host1x: Adding to iommu group 12 [ 6.349463] host1x 13e40000.host1x: initialized [ 6.354657] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 13 [ 6.362793] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 6.374772] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 14 [ 6.382790] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 6.394794] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 15 [ 6.402824] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 6.414796] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 16 [ 6.422809] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.434796] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 17 [ 6.442807] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.454812] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 18 [ 6.462831] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.474836] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 19 [ 6.482863] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.494884] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 20 [ 6.502937] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.514925] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 21 [ 6.522969] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 6.534972] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 22 [ 6.542990] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 6.554980] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 23 [ 6.563030] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 6.575037] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 24 [ 6.583066] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 6.595073] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 25 [ 6.603096] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 6.615130] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 26 [ 6.623158] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 6.635156] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 27 [ 6.643228] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 6.655204] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 28 [ 6.663228] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 6.675273] falcon 15340000.vic: Adding to iommu group 29 [ 6.686004] falcon 15340000.vic: initialized [ 6.690808] falcon 15380000.nvjpg: Adding to iommu group 30 [ 6.699743] falcon 15380000.nvjpg: initialized [ 6.704485] falcon 15540000.nvjpg1: Adding to iommu group 31 [ 6.713452] falcon 15540000.nvjpg1: initialized [ 6.718267] falcon 154c0000.nvenc: Adding to iommu group 32 [ 6.729142] falcon 154c0000.nvenc: initialized [ 6.733861] falcon 15a50000.ofa: Adding to iommu group 33 [ 6.743032] falcon 15a50000.ofa: initialized [ 6.747578] nvdec 15480000.nvdec: Adding to iommu group 34 [ 6.759713] nvdec 15480000.nvdec: initialized [ 6.764321] tsec 15500000.tsec: Adding to iommu group 35 [ 6.774335] tsec 15500000.tsec: initialized [ 6.782759] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.802287] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.819940] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 6.827271] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 6.834256] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.840798] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 6.847273] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.853493] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.862037] tegra194-isp5 14800000.isp: Adding to iommu group 36 [ 6.871169] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.880898] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 6.887568] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.896811] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.906037] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.915270] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.924497] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.933719] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.942949] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.952178] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.961402] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.970624] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.979851] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.989077] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.998304] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 7.007531] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 7.016759] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 7.025978] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 7.035361] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 37 [ 7.043525] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 38 [ 7.051555] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 7.061579] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 7.068400] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 7.078440] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 7.085259] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 7.095276] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 7.102118] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 39 [ 7.110792] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000) [ 7.122178] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 40 [ 7.130823] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000) [ 7.142203] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 41 [ 7.150882] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000) [ 7.162251] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 42 [ 7.170945] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000) [ 7.182329] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 43 [ 7.191000] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000) [ 7.202369] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 44 [ 7.211039] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000) [ 7.222408] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 45 [ 7.231049] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000) [ 7.242428] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 46 [ 7.251096] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000) [ 7.262476] pva 16000000.pva0: Adding to iommu group 47 [ 7.288701] pva 16000000.pva0: initialized [ 7.302033] nvdla 15880000.nvdla0: Adding to iommu group 48 [ 7.316943] nvdla 15880000.nvdla0: initialized [ 7.323455] nvdla 158c0000.nvdla1: Adding to iommu group 49 [ 7.338059] nvdla 158c0000.nvdla1: initialized [ 7.344543] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 2 [ 7.351540] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 7.359096] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 7.365737] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 7.372505] serial-tegra 3100000.serial: Adding to iommu group 2 [ 7.379184] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 14, base_baud = 0) is a TEGRA_UART [ 7.388992] serial-tegra 3110000.serial: Adding to iommu group 2 [ 7.395488] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 58, base_baud = 0) is a TEGRA_UART [ 7.405192] serial-tegra 3130000.serial: Adding to iommu group 2 [ 7.411658] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 59, base_baud = 0) is a TEGRA_UART [ 7.441411] tegra-xusb 3610000.xhci: Firmware timestamp: 2023-02-10 03:48:10 UTC, Version: 80.05 release [ 7.451178] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.456761] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 7.465390] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 7.475014] tegra-xusb 3610000.xhci: irq 228, io mem 0x03610000 [ 7.481516] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.490024] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.497462] usb usb1: Product: xHCI Host Controller [ 7.502481] usb usb1: Manufacturer: Linux 5.10.120-tegra xhci-hcd [ 7.508763] usb usb1: SerialNumber: 3610000.xhci [ 7.514310] hub 1-0:1.0: USB hub found [ 7.518203] hub 1-0:1.0: 4 ports detected [ 7.522592] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.528159] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 7.535957] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 7.543473] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 7.551982] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.559413] usb usb2: Product: xHCI Host Controller [ 7.564432] usb usb2: Manufacturer: Linux 5.10.120-tegra xhci-hcd [ 7.570712] usb usb2: SerialNumber: 3610000.xhci [ 7.576015] hub 2-0:1.0: USB hub found [ 7.579899] hub 2-0:1.0: 4 ports detected [ 7.590486] pca954x 0-0074: supply vcc-pullup not found, using dummy regulator [ 7.598084] pca954x 0-0074: pca954x_probe: forcing device bus number, start 30. [ 7.605617] pca954x 0-0074: device detect skipped. [ 7.612119] pca953x 30-0026: using no AI [ 7.618515] gpiochip2: registered GPIOs 300 to 315 on 30-0026 [ 7.626544] pca953x 30-0022: using no AI [ 7.632590] gpiochip3: registered GPIOs 284 to 299 on 30-0022 [ 7.639248] pca953x 30-0021: using no AI [ 7.645281] gpiochip4: registered GPIOs 268 to 283 on 30-0021 [ 7.651241] i2c i2c-0: Added multiplexed i2c bus 30 [ 7.658815] i2c i2c-0: Added multiplexed i2c bus 31 [ 7.666364] i2c i2c-0: Added multiplexed i2c bus 32 [ 7.672559] pca953x 33-0026: using no AI [ 7.678421] gpiochip5: registered GPIOs 252 to 267 on 33-0026 [ 7.685018] pca953x 33-0020: using no AI [ 7.691054] gpiochip6: registered GPIOs 236 to 251 on 33-0020 [ 7.697629] pca953x 33-0023: using no AI [ 7.703645] gpiochip7: registered GPIOs 220 to 235 on 33-0023 [ 7.710262] pca953x 33-0024: using no AI [ 7.716287] gpiochip8: registered GPIOs 204 to 219 on 33-0024 [ 7.722862] pca953x 33-0027: using no AI [ 7.728886] gpiochip9: registered GPIOs 188 to 203 on 33-0027 [ 7.735864] i2c i2c-0: Added multiplexed i2c bus 33 [ 7.740897] pca954x 0-0074: registered 4 multiplexed busses for I2C switch pca9546 [ 7.753275] pca954x 1-0074: supply vcc-pullup not found, using dummy regulator [ 7.760784] pca954x 1-0074: pca954x_probe: forcing device bus number, start 60. [ 7.768314] pca954x 1-0074: device detect skipped. [ 7.774591] pca953x 60-0026: using no AI [ 7.780853] gpiochip10: registered GPIOs 172 to 187 on 60-0026 [ 7.787514] pca953x 60-0020: using no AI [ 7.793547] gpiochip11: registered GPIOs 156 to 171 on 60-0020 [ 7.800246] pca953x 60-0023: using no AI [ 7.806294] gpiochip12: registered GPIOs 140 to 155 on 60-0023 [ 7.812975] pca953x 60-0027: using no AI [ 7.819038] gpiochip13: registered GPIOs 124 to 139 on 60-0027 [ 7.826810] pca953x 60-0022: using no AI [ 7.832845] gpiochip14: registered GPIOs 108 to 123 on 60-0022 [ 7.839501] pca953x 60-0021: using no AI [ 7.845537] gpiochip15: registered GPIOs 92 to 107 on 60-0021 [ 7.851477] i2c i2c-1: Added multiplexed i2c bus 60 [ 7.858914] i2c i2c-1: Added multiplexed i2c bus 61 [ 7.865938] i2c i2c-1: Added multiplexed i2c bus 62 [ 7.871973] pca953x 63-0026: using no AI [ 7.877844] gpiochip16: registered GPIOs 76 to 91 on 63-0026 [ 7.884279] pca953x 63-0023: using no AI [ 7.890322] gpiochip17: registered GPIOs 60 to 75 on 63-0023 [ 7.896253] i2c i2c-1: Added multiplexed i2c bus 63 [ 7.901277] pca954x 1-0074: registered 4 multiplexed busses for I2C switch pca9546 [ 7.922313] tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing [ 7.946642] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2008000 KHz, changing to: 2035200 KHz [ 7.959427] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2005000 KHz, changing to: 2035200 KHz [ 7.971359] tegra194-cpufreq e000000.ccplex: probed with ICC, cl:3 [ 7.979470] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 7.986760] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 7.990422] mmc0: CQHCI version 5.10 [ 7.993939] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 8.006310] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 8.014996] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 8.038192] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 8.134300] mmc0: Command Queue Engine enabled [ 8.138878] mmc0: periodic cache flush enabled [ 8.143456] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 8.150368] mmcblk0: mmc0:0001 G1M15M 59.3 GiB [ 8.155253] mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (510:0) [ 8.171549] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 [ 9.132305] tegra194-pcie 14100000.pcie: Phy link never came up [ 9.138484] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 9.145304] pci_bus 0001:00: root bus resource [bus 00-ff] [ 9.150941] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 9.160795] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 9.171624] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 9.179555] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 9.185899] pci 0001:00:00.0: PME# supported from D0 D3hot [ 9.199876] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 9.205273] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 9.214252] pcieport 0001:00:00.0: Adding to iommu group 8 [ 9.220171] pcieport 0001:00:00.0: PME: Signaling with IRQ 52 [ 9.226355] pcieport 0001:00:00.0: AER: enabled with IRQ 52 [ 9.232352] pci_bus 0001:01: busn_res: [bus 01-ff] is released [ 9.238452] pci 0001:00:00.0: Removing from iommu group 8 [ 9.244008] pci_bus 0001:00: busn_res: [bus 00-ff] is released [ 9.251775] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 9.259207] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 9.266385] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 9.275072] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 9.283755] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 9.610979] tegra-xusb 3610000.xhci: entering ELPG done [ 10.400634] tegra194-pcie 14160000.pcie: Phy link never came up [ 10.406802] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 10.413617] pci_bus 0004:00: root bus resource [bus 00-ff] [ 10.419259] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 10.429374] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 10.440208] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 10.448138] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 10.454492] pci 0004:00:00.0: PME# supported from D0 D3hot [ 10.468194] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 10.473588] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 10.482556] pcieport 0004:00:00.0: Adding to iommu group 9 [ 10.488434] pcieport 0004:00:00.0: PME: Signaling with IRQ 54 [ 10.494612] pcieport 0004:00:00.0: AER: enabled with IRQ 54 [ 10.500584] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 10.506669] pci 0004:00:00.0: Removing from iommu group 9 [ 10.512234] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 10.519840] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 10.526499] vdd-3v3-pcie: supplied by vdd-3v3-sys [ 10.531548] avdd-cam-2v8: supplied by vdd-3v3-sys [ 10.536501] vdd-3v3-sd: supplied by vdd-3v3-sys [ 10.543283] tegra194-isp5 14800000.isp: initialized [ 10.554482] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 10.560935] (NULL device *): fops function table already registered [ 10.569273] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 10.576245] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 10.692109] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 10.699298] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 10.707984] tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000 [ 10.716666] tegra194-pcie 141a0000.pcie: MEM 0x2740000000..0x2b27ffffff -> 0x2740000000 [ 10.831039] tegra194-pcie 141a0000.pcie: Link up [ 10.837878] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 10.844689] pci_bus 0005:00: root bus resource [bus 00-ff] [ 10.850329] pci_bus 0005:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3a100000-0x3a1fffff]) [ 10.860421] pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff]) [ 10.871258] pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref] [ 10.879179] pci 0005:00:00.0: [10de:229a] type 01 class 0x060400 [ 10.885495] pci 0005:00:00.0: PME# supported from D0 D3hot [ 10.895686] pci 0005:01:00.0: [8086:1572] type 00 class 0x020000 [ 10.902032] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x007fffff 64bit pref] [ 10.909633] pci 0005:01:00.0: reg 0x1c: [mem 0x00000000-0x00007fff 64bit pref] [ 10.917174] pci 0005:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 10.925019] pci 0005:01:00.0: PME# supported from D0 D3hot D3cold [ 10.931631] pci 0005:01:00.0: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref] [ 10.939149] pci 0005:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR0 for 32 VFs) [ 10.949855] pci 0005:01:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 10.957386] pci 0005:01:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0007ffff 64bit pref] (contains BAR3 for 32 VFs) [ 10.969794] pci 0005:01:00.1: [8086:1572] type 00 class 0x020000 [ 10.976142] pci 0005:01:00.1: reg 0x10: [mem 0x00000000-0x007fffff 64bit pref] [ 10.983729] pci 0005:01:00.1: reg 0x1c: [mem 0x00000000-0x00007fff 64bit pref] [ 10.991279] pci 0005:01:00.1: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 10.999053] pci 0005:01:00.1: PME# supported from D0 D3hot D3cold [ 11.005627] pci 0005:01:00.1: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref] [ 11.013149] pci 0005:01:00.1: VF(n) BAR0 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR0 for 32 VFs) [ 11.023871] pci 0005:01:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 11.031387] pci 0005:01:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0007ffff 64bit pref] (contains BAR3 for 32 VFs) [ 11.043734] pci 0005:01:00.2: [8086:1572] type 00 class 0x020000 [ 11.050074] pci 0005:01:00.2: reg 0x10: [mem 0x00000000-0x007fffff 64bit pref] [ 11.057657] pci 0005:01:00.2: reg 0x1c: [mem 0x00000000-0x00007fff 64bit pref] [ 11.065199] pci 0005:01:00.2: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 11.072971] pci 0005:01:00.2: PME# supported from D0 D3hot D3cold [ 11.079547] pci 0005:01:00.2: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref] [ 11.087066] pci 0005:01:00.2: VF(n) BAR0 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR0 for 32 VFs) [ 11.097795] pci 0005:01:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 11.105311] pci 0005:01:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0007ffff 64bit pref] (contains BAR3 for 32 VFs) [ 11.117649] pci 0005:01:00.3: [8086:1572] type 00 class 0x020000 [ 11.123998] pci 0005:01:00.3: reg 0x10: [mem 0x00000000-0x007fffff 64bit pref] [ 11.131597] pci 0005:01:00.3: reg 0x1c: [mem 0x00000000-0x00007fff 64bit pref] [ 11.139151] pci 0005:01:00.3: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 11.146923] pci 0005:01:00.3: PME# supported from D0 D3hot D3cold [ 11.153500] pci 0005:01:00.3: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref] [ 11.161016] pci 0005:01:00.3: VF(n) BAR0 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR0 for 32 VFs) [ 11.171736] pci 0005:01:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 11.179260] pci 0005:01:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0007ffff 64bit pref] (contains BAR3 for 32 VFs) [ 11.195307] pci 0005:00:00.0: BAR 15: assigned [mem 0x2740000000-0x2742bfffff 64bit pref] [ 11.203723] pci 0005:00:00.0: BAR 14: assigned [mem 0x2b28000000-0x2b281fffff] [ 11.211173] pci 0005:01:00.0: BAR 0: assigned [mem 0x2740000000-0x27407fffff 64bit pref] [ 11.219577] pci 0005:01:00.1: BAR 0: assigned [mem 0x2740800000-0x2740ffffff 64bit pref] [ 11.227976] pci 0005:01:00.2: BAR 0: assigned [mem 0x2741000000-0x27417fffff 64bit pref] [ 11.236372] pci 0005:01:00.3: BAR 0: assigned [mem 0x2741800000-0x2741ffffff 64bit pref] [ 11.244776] pci 0005:01:00.0: BAR 6: assigned [mem 0x2b28000000-0x2b2807ffff pref] [ 11.252560] pci 0005:01:00.1: BAR 6: assigned [mem 0x2b28080000-0x2b280fffff pref] [ 11.260346] pci 0005:01:00.2: BAR 6: assigned [mem 0x2b28100000-0x2b2817ffff pref] [ 11.268132] pci 0005:01:00.3: BAR 6: assigned [mem 0x2b28180000-0x2b281fffff pref] [ 11.275922] pci 0005:01:00.0: BAR 7: assigned [mem 0x2742000000-0x27421fffff 64bit pref] [ 11.284280] pci 0005:01:00.1: BAR 7: assigned [mem 0x2742200000-0x27423fffff 64bit pref] [ 11.292639] pci 0005:01:00.2: BAR 7: assigned [mem 0x2742400000-0x27425fffff 64bit pref] [ 11.300994] pci 0005:01:00.3: BAR 7: assigned [mem 0x2742600000-0x27427fffff 64bit pref] [ 11.309341] pci 0005:01:00.0: BAR 3: assigned [mem 0x2742800000-0x2742807fff 64bit pref] [ 11.317763] pci 0005:01:00.1: BAR 3: assigned [mem 0x2742808000-0x274280ffff 64bit pref] [ 11.326159] pci 0005:01:00.2: BAR 3: assigned [mem 0x2742810000-0x2742817fff 64bit pref] [ 11.334555] pci 0005:01:00.3: BAR 3: assigned [mem 0x2742818000-0x274281ffff 64bit pref] [ 11.342967] pci 0005:01:00.0: BAR 10: assigned [mem 0x2742820000-0x274289ffff 64bit pref] [ 11.351412] pci 0005:01:00.1: BAR 10: assigned [mem 0x27428a0000-0x274291ffff 64bit pref] [ 11.359866] pci 0005:01:00.2: BAR 10: assigned [mem 0x2742920000-0x274299ffff 64bit pref] [ 11.368311] pci 0005:01:00.3: BAR 10: assigned [mem 0x27429a0000-0x2742a1ffff 64bit pref] [ 11.376770] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 11.382143] pci 0005:00:00.0: bridge window [mem 0x2b28000000-0x2b281fffff] [ 11.389495] pci 0005:00:00.0: bridge window [mem 0x2740000000-0x2742bfffff 64bit pref] [ 11.397826] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 11.406567] pci 0005:01:00.0: Max Payload Size set to 256/2048 (was 128), Max Read Rq 512 [ 11.415301] pci 0005:01:00.1: Max Payload Size set to 256/2048 (was 128), Max Read Rq 512 [ 11.424033] pci 0005:01:00.2: Max Payload Size set to 256/2048 (was 128), Max Read Rq 512 [ 11.432768] pci 0005:01:00.3: Max Payload Size set to 256/2048 (was 128), Max Read Rq 512 [ 11.441746] pcieport 0005:00:00.0: Adding to iommu group 10 [ 11.447717] pcieport 0005:00:00.0: PME: Signaling with IRQ 56 [ 11.453882] pcieport 0005:00:00.0: AER: enabled with IRQ 56 [ 11.461171] irq: IRQ296: trimming hierarchy from :pmc@c360000 [ 11.467170] irq: IRQ297: trimming hierarchy from :interrupt-controller@f400000-1 [ 11.474839] irq: IRQ298: trimming hierarchy from :pmc@c360000 [ 11.480802] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 11.488416] tegra-se-nvhost 15810000.se: Adding to iommu group 50 [ 11.495186] tegra-se-nvhost 15810000.se: initialized [ 11.512950] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 11.519345] tegra-se-nvhost 15820000.se: Adding to iommu group 51 [ 11.526044] tegra-se-nvhost 15820000.se: initialized [ 11.533523] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 11.539913] tegra-se-nvhost 15840000.se: Adding to iommu group 52 [ 11.546466] tegra-se-nvhost 15840000.se: initialized [ 11.556544] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 11.563530] tegra_actmon d230000.actmon: in actmon_register()... [ 11.569998] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 11.576622] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 11.585069] hvc_sysfs: hypervisor is not present RNING: clock_disable: clk_power_ungate on gated domain 35 for gpusysclk WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc1clk WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc0clk 11.720668] ALSA device list: [ 11.723735] No soundcards found. [ 11.727821] Freeing unused kernel memory: 3968K [ 11.732553] Run /init as init process [ 11.747863] Root device found: mmcblk0p1 [ 11.756189] Found dev node: /dev/mmcblk0p1 [ 11.928528] EXT4-fs (mmcblk0p1): 3 orphan inodes deleted [ 11.934013] EXT4-fs (mmcblk0p1): recovery complete [ 11.949988] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 11.961060] Rootfs mounted over mmcblk0p1 [ 11.974516] Switching from initrd to actual rootfs [ 12.096192] systemd[1]: System time before build time, advancing clock. [ 12.106132] random: crng init done [ 12.121828] x_tables: module verification failed: signature and/or required key missing - tainting kernel [ 12.151611] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 12.175256] systemd[1]: Detected architecture arm64. [ 12.215926] systemd[1]: Set hostname to <641CZ001>. [ 12.411247] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 12.424280] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 12.433839] systemd[1]: Created slice system-modprobe.slice. [ 12.440030] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 12.446733] systemd[1]: Created slice User and Session Slice. [ 12.452765] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 12.460873] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 12.470666] systemd[1]: Reached target User and Group Name Lookups. [ 12.477164] systemd[1]: Reached target Slices. [ 12.481788] systemd[1]: Reached target Mounting snaps. [ 12.487117] systemd[1]: Reached target Mounted snaps. [ 12.492378] systemd[1]: Reached target Swap. [ 12.497057] systemd[1]: Listening on RPCbind Server Activation Socket. [ 12.503933] systemd[1]: Listening on Syslog Socket. [ 12.509097] systemd[1]: Listening on fsck to fsckd communication Socket. [ 12.516092] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 12.523054] systemd[1]: Listening on Journal Audit Socket. [ 12.528822] systemd[1]: Listening on Journal Socket (/dev/log). [ 12.535066] systemd[1]: Listening on Journal Socket. [ 12.540331] systemd[1]: Listening on udev Control Socket. [ 12.545998] systemd[1]: Listening on udev Kernel Socket. [ 12.552517] systemd[1]: Mounting Huge Pages File System... [ 12.559265] systemd[1]: Mounting POSIX Message Queue File System... [ 12.566587] systemd[1]: Mounting RPC Pipe File System... [ 12.573024] systemd[1]: Mounting Kernel Debug File System... [ 12.579783] systemd[1]: Mounting Kernel Trace File System... [ 12.586775] systemd[1]: Starting Journal Service... [ 12.592999] systemd[1]: Starting Set the console keyboard layout... [ 12.600415] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 12.610272] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 12.617243] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 12.626691] systemd[1]: Starting Load Kernel Module efi_pstore... [ 12.634226] systemd[1]: Starting Load Kernel Module pstore_blk... [ 12.641761] systemd[1]: Starting Load Kernel Module pstore_zone... [ 12.649198] systemd[1]: Starting Load Kernel Module ramoops... [ 12.656291] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 12.664447] systemd[1]: Started Nameserver information manager. [ 12.670755] systemd[1]: Reached target Network (Pre). [ 12.676748] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 12.686116] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 12.703189] systemd[1]: Starting Load Kernel Modules... [ 12.709531] systemd[1]: Starting Remount Root and Kernel File Systems... [ 12.716418] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 12.723008] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 12.723177] systemd[1]: Starting udev Coldplug all Devices... [ 12.729837] tegra-carveouts tegra-carveouts: fsi :dma coherent mem declare 0x0000000838e00000,16777216 [ 12.745257] tegra-carveouts tegra-carveouts: assigned reserved memory node fsi-carveout [ 12.745265] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x0000000849800000,914358272 [ 12.763146] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 12.763151] nvmap_page_pool_init: Total RAM pages: 7832359 [ 12.777023] nvmap_page_pool_init: nvmap page pool size: 979044 pages (3824 MB) [ 12.777063] nvmap_background_zero_thread: PP zeroing thread starting. [ 12.777163] misc nvmap: created heap vpr base 0x0000000849800000 size (892928KiB) [ 12.780107] misc nvmap: created heap fsi base 0x0000000838e00000 size (16384KiB) [ 12.808068] systemd[1]: Started Journal Service. [ 12.835732] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 12.835732] [ 12.837898] systemd-journald[276]: Received client request to flush runtime journal. [ 13.189084] nvidia: loading out-of-tree module taints kernel. [ 13.207344] using random self ethernet address [ 13.212500] using random host ethernet address [ 13.241753] spi spi2.4: GPIO request failed: -16 [ 13.247058] spi-tegra114 3230000.spi: can't setup spi2.4, status -16 [ 13.256887] spi_master spi2: spi_device register error /spi@3230000/spi@4 [ 13.264654] spi_master spi2: Failed to create SPI device for /spi@3230000/spi@4 [ 13.293015] rt5640 8-001c: Device with ID register 0xffff7386 is not rt5640/39 [ 13.877772] using random self ethernet address [ 13.882371] using random host ethernet address [ 17.326725] eth0: mtu greater than device maximum Ubuntu 20.04.6 LTS 641CZ001 ttyTCU0