$ sudo minicom -D /dev/ttyUSB0 Welcome to minicom 2.7.1 OPTIONS: I18n Compiled on Dec 23 2019, 02:06:26. Port /dev/ttyUSB0, 15:59:01 Press CTRL-A Z for help on special keys �� [0192.129] I> MB1 (version: 1.4.0.1-t234-54845784-08e631ca) [0192.134] I> t234-A01-1-Silicon (0x12347) Prod [0192.138] I> Boot-mode : BPMP Diagnostic [0192.142] I> Entry timestamp: 0x00000000 [0192.146] I> last_boot_error: 0x0 [0192.149] I> BR-BCT: preprod_dev_sign: 0 [0192.153] I> rst_source: 0xb, rst_level: 0x1 [0192.157] I> Task: Initialize MB2 params [0192.161] I> MB2-params @ 0x40060000 [0192.165] I> Task: Crypto init [0192.168] I> Task: Perform MB1 KAT tests [0192.172] I> Task: NVRNG health check [0192.175] I> NVRNG: Health check success [0192.179] I> Task: Secure debug controls [0192.183] I> Task: strap war set [0192.186] I> Task: Program NV master stream id [0192.190] I> Task: Verify boot mode [0192.196] I> Task: Alias fuses [0192.199] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0192.206] I> Task: Print SKU type [0192.209] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x0000000f [0192.214] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0192.219] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0192.223] I> FUSE_OPT_DLA_DISABLE = 0x00000003 [0192.227] I> FUSE_OPT_PVA_DISABLE = 0x00000001 [0192.232] I> FUSE_OPT_NVENC_DISABLE = 0x00000001 [0192.236] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0192.240] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0192.245] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0192.249] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0192.253] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0192.257] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0192.261] I> FUSE_SKU_INFO_0 = 0xd5 [0192.265] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0192.269] I> FUSE_PACKAGE_INFO_0 = 0x2 [0192.273] I> SKU: Prod [0192.275] I> Task: Boost clocks [0192.278] I> Initializing NAFLL for BPMP_CPU_NIC. [0192.283] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0192.288] I> BPMP NAFLL lock success. [0192.292] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0192.296] I> Initializing PLLC2 for AXI_CBB. [0192.301] I> AXI_CBB : src = 35, divisor = 0 [0192.305] I> Task: Voltage monitor [0192.308] I> VMON: Vmon re-calibration and fine tuning done [0192.313] I> Task: UPHY init [0192.317] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0192.322] I> Task: Boot device init [0192.326] I> Boot_device: RCM [0192.329] I> USB configuration success [0192.332] I> Task: TSC init [0192.335] I> Task: Enable WDT 5th expiry [0192.339] I> Task: I2C register [0192.342] I> Task: Set I2C bus freq [0192.345] I> Task: Reset FSI [0192.348] I> Task: Enable clock-mon [0192.352] I> FMON: Fmon re-programming done [0192.356] I> Task: Mapper init [0192.359] I> Task: MB1 fixed firewalls [0192.365] W> Firewall readback mismatch [0192.370] I> Task: Load MB2/Applet/FSKP [0192.374] I> Loading MB2 Applet [0192.377] I> Slot: 0 [0192.379] I> Binary[21] block-352321536 (partition size: 0x50000) [0192.385] I> Binary name: MB2-Applet [0192.389] I> Size of crypto header is 8192 [0192.392] I> Size of crypto header is 8192 [0192.397] I> BCH of MB2-Applet read from storage [0192.401] I> BCH address is : 0x4004e000 [0192.405] I> MB2-Applet header integrity check is success [0192.411] I> Binary magic in BCH component 0 is MB2A [0192.415] I> component binary type is 21 [0192.419] I> Size of crypto header is 8192 [0192.443] I> MB2-Applet binary is read from storage [0192.448] I> MB2-Applet binary integrity check is success [0192.453] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x42440) [0192.460] I> Task: Prepare MB2 params [0192.464] I> Task: Misc NV security settings [0192.468] I> NVDEC sticky bits programming done [0192.473] I> Successfully powergated NVDEC [0192.477] I> Task: Disable/Reload WDT [0192.480] I> Task: Program misc carveouts [0192.484] I> Task: Disable SCPM/POD reset [0192.488] I> SLCG Global override status := 0x0 [0192.492] I> MB1: MSS reconfig completed [0192.496] W> Firewall readback mismatch [0192.500] W> Firewall readback mismatch [0192.504] W> Firewall readback mismatch [0192.507] W> Firewall readback mismatch [0192.511] W> Firewall readback mismatch [0192.515] W> Firewall readback mismatch [0192.518] W> Firewall readback mismatch [0192.522] W> Firewall readback mismatch [0192.526] W> Firewall readback mismatch [0192.529] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-b648c465) I> t234-A01-1-Silicon (0x12347) Prod I> Emulation: I> Entry timestamp: 0x00000000 I> Task: Pinmux init I> Task: Crypto init I> Task: Boot device init I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: SDMMC_BOOT instance: 3 E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 0-3 I> Secondary storage device: SDMMC_USER instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 1-3 I> Secondary storage device: QSPI_FLASH instance: 0 I> Task: I2C register I> Task: Register exit handlers I> Task: Enter 3p server I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000021 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> strt_pg_num(0) num_of_pgs(16) read_buf(0x40071738) I> BRBCT integrity check is success I> Validation passed for 1 copy of BRBCT �� [0047.100] I> MB1 (version: 1.4.0.1-t234-54845784-08e631ca) [0047.105] I> t234-A01-1-Silicon (0x12347) Prod [0047.110] I> Boot-mode : Coldboot [0047.113] I> Entry timestamp: 0x00000000 [0047.116] I> last_boot_error: 0x0 [0047.120] I> BR-BCT: preprod_dev_sign: 0 [0047.123] I> rst_source: 0xb, rst_level: 0x1 [0047.128] I> Task: SE error check [0047.131] I> Task: Bootchain select WAR set [0047.135] I> Task: Enable SLCG [0047.138] I> Task: CRC check [0047.140] I> Task: Initialize MB2 params [0047.145] I> MB2-params @ 0x40060000 [0047.148] I> Task: Crypto init [0047.151] I> Task: Perform MB1 KAT tests [0047.155] I> Task: NVRNG health check [0047.159] I> NVRNG: Health check success [0047.162] I> Task: MSS Bandwidth limiter settings for iGPU clients [0047.168] I> Task: Enabling and initialization of Bandwidth limiter [0047.174] I> No request to configure MBWT settings for any PC! [0047.180] I> Task: Secure debug controls [0047.184] I> Task: strap war set [0047.187] I> Task: Initialize SOC Therm [0047.191] I> Task: Program NV master stream id [0047.195] I> Task: Verify boot mode [0047.201] I> Task: Alias fuses [0047.204] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0047.211] I> Task: Print SKU type [0047.214] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x0000000f [0047.219] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0047.224] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0047.228] I> FUSE_OPT_DLA_DISABLE = 0x00000003 [0047.232] I> FUSE_OPT_PVA_DISABLE = 0x00000001 [0047.236] I> FUSE_OPT_NVENC_DISABLE = 0x00000001 [0047.241] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0047.245] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0047.250] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0047.254] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0047.258] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0047.262] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0047.266] I> FUSE_SKU_INFO_0 = 0xd5 [0047.270] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0047.274] I> FUSE_PACKAGE_INFO_0 = 0x2 [0047.277] I> SKU: Prod [0047.280] I> Task: Boost clocks [0047.283] I> Initializing NAFLL for BPMP_CPU_NIC. [0047.288] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0047.293] I> BPMP NAFLL lock success. [0047.297] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0047.301] I> Initializing PLLC2 for AXI_CBB. [0047.305] I> AXI_CBB : src = 35, divisor = 0 [0047.310] I> Task: Voltage monitor [0047.313] I> VMON: Vmon re-calibration and fine tuning done [0047.318] I> Task: UPHY init [0047.323] I> HSIO UPHY init done [0047.326] W> Skipping GBE UPHY config [0047.330] I> Task: Boot device init [0047.333] I> Boot_device: RCM [0047.336] I> USB configuration success [0047.340] I> Task: TSC init [0047.343] I> Task: Load membct [0047.345] I> RAM_CODE 0x4000021 [0047.349] I> Loading MEMBCT [0047.351] I> Slot: 0 [0047.353] I> Binary[0] block-0 (partition size: 0x40000) [0047.358] I> Binary name: MEM-BCT-0 [0047.362] I> Size of crypto header is 8192 [0047.366] I> Size of crypto header is 8192 [0047.370] I> BCH of MEM-BCT-0 read from storage [0047.374] I> BCH address is : 0x40050000 [0047.378] I> MEM-BCT-0 header integrity check is success [0047.384] I> Binary magic in BCH component 0 is MEM0 [0047.388] I> component binary type is 0 [0047.396] I> MEM-BCT-0 binary is read from storage [0047.401] I> MEM-BCT-0 binary integrity check is success [0047.406] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0047.413] I> RAM_CODE 0x4000021 [0047.418] I> RAM_CODE 0x4000021 [0047.422] I> Task: Load Page retirement list [0047.426] I> Task: SDRAM params override [0047.430] I> Task: Save mem-bct info [0047.433] I> Task: Carveout allocate [0047.437] I> Update CCPLEX IST carveout from MB1-BCT [0047.442] I> ECC region[0]: Start:0x0, End:0x0 [0047.446] I> ECC region[1]: Start:0x0, End:0x0 [0047.450] I> ECC region[2]: Start:0x0, End:0x0 [0047.454] I> ECC region[3]: Start:0x0, End:0x0 [0047.459] I> ECC region[4]: Start:0x0, End:0x0 [0047.463] I> Non-ECC region[0]: Start:0x80000000, End:0x280000000 [0047.469] I> Non-ECC region[1]: Start:0x0, End:0x0 [0047.474] I> Non-ECC region[2]: Start:0x0, End:0x0 [0047.478] I> Non-ECC region[3]: Start:0x0, End:0x0 [0047.483] I> Non-ECC region[4]: Start:0x0, End:0x0 [0047.494] I> allocated(CO:43) base:0xbe000000 size:0x4000000 align: 0x200000 [0047.501] I> allocated(CO:39) base:0x27de00000 size:0x2200000 align: 0x10000 [0047.507] I> allocated(CO:20) base:0x27a000000 size:0x2000000 align: 0x2000000 [0047.515] I> allocated(CO:24) base:0x278000000 size:0x2000000 align: 0x2000000 [0047.522] I> allocated(CO:28) base:0x276000000 size:0x2000000 align: 0x2000000 [0047.529] I> allocated(CO:22) base:0x27c000000 size:0x1000000 align: 0x1000000 [0047.536] I> allocated(CO:35) base:0x275000000 size:0x1000000 align: 0x100000 [0047.543] I> allocated(CO:02) base:0x27d000000 size:0x800000 align: 0x800000 [0047.550] I> allocated(CO:03) base:0x274800000 size:0x800000 align: 0x800000 [0047.557] I> allocated(CO:06) base:0x274000000 size:0x800000 align: 0x800000 [0047.564] I> allocated(CO:56) base:0x273800000 size:0x800000 align: 0x200000 [0047.571] I> allocated(CO:07) base:0x27d800000 size:0x400000 align: 0x400000 [0047.578] I> allocated(CO:33) base:0x273400000 size:0x400000 align: 0x200000 [0047.585] I> allocated(CO:19) base:0x273180000 size:0x280000 align: 0x10000 [0047.592] I> allocated(CO:23) base:0x27dc00000 size:0x200000 align: 0x200000 [0047.598] I> allocated(CO:01) base:0x273000000 size:0x100000 align: 0x100000 [0047.605] I> allocated(CO:05) base:0x272f00000 size:0x100000 align: 0x100000 [0047.612] I> allocated(CO:08) base:0x272e00000 size:0x100000 align: 0x100000 [0047.619] I> allocated(CO:09) base:0x272d00000 size:0x100000 align: 0x100000 [0047.626] I> allocated(CO:12) base:0x272c00000 size:0x100000 align: 0x100000 [0047.633] I> allocated(CO:15) base:0x272b00000 size:0x100000 align: 0x100000 [0047.640] I> allocated(CO:17) base:0x272a00000 size:0x100000 align: 0x100000 [0047.647] I> allocated(CO:27) base:0x272900000 size:0x100000 align: 0x100000 [0047.654] I> allocated(CO:42) base:0x272800000 size:0x100000 align: 0x100000 [0047.661] I> allocated(CO:54) base:0x273100000 size:0x80000 align: 0x80000 [0047.668] I> allocated(CO:34) base:0x2727f0000 size:0x10000 align: 0x10000 [0047.675] I> allocated(CO:72) base:0x2725f0000 size:0x200000 align: 0x10000 [0047.681] I> allocated(CO:46) base:0x240000000 size:0x20000000 align: 0x20000000 [0047.689] I> allocated(CO:47) base:0x272000000 size:0x400000 align: 0x200000 [0047.696] I> allocated(CO:50) base:0x271e00000 size:0x200000 align: 0x100000 [0047.703] I> allocated(CO:48) base:0x2725d0000 size:0x20000 align: 0x10000 [0047.709] I> allocated(CO:69) base:0x2725b0000 size:0x20000 align: 0x10000 [0047.716] I> allocated(CO:49) base:0x2725a0000 size:0x10000 align: 0x10000 [0047.723] I> NSDRAM base: 0x80000000, end: 0x2725f0000, size: 0x1f25f0000 [0047.730] I> Task: Thermal check [0047.733] I> max_chip_limit = 105 [0047.736] I> min_chip_limit = -28 [0047.739] I> max temp read = 38 [0047.742] I> min temp read = 37 [0047.745] I> Task: Update FSI SCR with thermal fuse data [0047.750] I> Task: Enable WDT 5th expiry [0047.754] I> Task: I2C register [0047.757] I> Task: Set I2C bus freq [0047.760] I> Task: Reset FSI [0047.763] I> Task: Pinmux init [0047.766] I> skipped mmio_addr = 0x9240008 [0047.770] I> skipped mmio_addr = 0x9240000 [0047.774] I> skipped mmio_addr = 0x9240010 [0047.778] I> skipped mmio_addr = 0x9240018 [0047.782] I> skipped mmio_addr = 0x9240020 [0047.786] I> skipped mmio_addr = 0x9240030 [0047.790] I> skipped mmio_addr = 0x9240028 [0047.794] I> skipped mmio_addr = 0x9240038 [0047.798] I> skipped mmio_addr = 0x9240040 [0047.802] I> skipped mmio_addr = 0x9240048 [0047.806] I> skipped mmio_addr = 0x9241000 [0047.809] I> skipped mmio_addr = 0x9241008 [0047.813] I> skipped mmio_addr = 0x9241010 [0047.817] I> skipped mmio_addr = 0x9241018 [0047.821] I> skipped mmio_addr = 0x9241020 [0047.825] I> skipped mmio_addr = 0x9241028 [0047.829] I> skipped mmio_addr = 0x9241030 [0047.833] I> skipped mmio_addr = 0x9241038 [0047.837] I> skipped mmio_addr = 0x9241040 [0047.841] I> skipped mmio_addr = 0x9242000 [0047.845] I> skipped mmio_addr = 0x9242008 [0047.849] I> Task: Prod config init [0047.852] I> Task: Pad voltage init [0047.856] I> Task: Prod init [0047.858] I> Task: Program rst req config reg [0047.863] I> Task: Common rail init [0047.866] I> DONE: Thermal config [0047.870] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0047.878] I> DONE: SOC rail config [0047.882] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0047.888] I> DONE: MEMIO rail config [0047.892] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT. [0047.898] I> DONE: GPU rail info [0047.902] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT. [0047.908] I> DONE: CV rail info [0047.911] I> Task: Mem clock src [0047.914] I> Task: Misc. board config [0047.918] I> PMIC_CONFIG: Platform config not found in MB1 BCT. [0047.924] I> Task: SDRAM init [0047.927] I> MemoryType: 4 MemBctRevision: 1 [0047.933] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0047.941] I> MSS CAR: Init PLLM [0047.944] I> MSS CAR: Init PLLHUB [0047.949] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0047.960] I> SDRAM initialized! [0047.963] I> SDRAM Size in Total 0x200000000 [0047.967] I> Task: Dram Ecc scrub [0047.970] I> Task: DRAM alias check [0047.977] I> Task: Program NSDRAM carveout [0047.981] I> NSDRAM carveout encryption is enabled [0047.986] I> Program NSDRAM carveout [0047.989] I> Task: Register checker [0047.993] I> Task: Enable clock-mon [0047.997] I> FMON: Fmon re-programming done [0048.001] I> Task: Mapper init [0048.003] I> Task: SC7 Context Init [0048.007] W> SC7_CONTEXT_SAVE: SC7 ctx save is not supported. [0048.013] I> Task: CCPLEX IST init [0048.016] I> Task: CPU WP0 [0048.019] I> Loading MCE [0048.021] I> Slot: 0 [0048.023] I> Binary[8] block-134217728 (partition size: 0x80000) [0048.029] I> Binary name: MCE [0048.032] I> Size of crypto header is 8192 [0048.036] I> Size of crypto header is 8192 [0053.426] I> BCH of MCE read from storage [0053.429] I> BCH address is : 0x4003e000 [0053.433] I> MCE header integrity check is success [0053.438] I> Binary magic in BCH component 0 is MTSM [0053.443] I> component binary type is 8 [0053.446] I> Size of crypto header is 8192 [0053.454] I> MCE binary is read from storage [0053.458] I> MCE binary integrity check is success [0053.463] I> Binary MCE loaded successfully at 0x40000000 (0x2baf0) [0053.469] I> Size of crypto header is 8192 [0053.473] I> Sending WP0 mailbox command to PSC [0053.482] I> Task: XUSB Powergate [0053.485] I> Skipping powergate XUSB. [0053.489] I> Task: MB1 fixed firewalls [0053.495] W> Firewall readback mismatch [0053.500] I> Task: Load bpmp-fw [0053.503] I> Slot: 0 [0053.505] I> Binary[15] block-251658240 (partition size: 0x180000) [0053.511] I> Binary name: BPMP_FW [0053.514] I> Size of crypto header is 8192 [0053.518] I> Size of crypto header is 8192 [0053.522] I> BCH of BPMP_FW read from storage [0053.526] I> BCH address is : 0x807fe000 [0053.530] I> BPMP_FW header integrity check is success [0053.535] I> Binary magic in BCH component 0 is BPMF [0053.540] I> component binary type is 15 [0053.544] I> Size of crypto header is 8192 [0053.565] I> BPMP_FW binary is read from storage [0053.572] I> BPMP_FW binary integrity check is success [0053.577] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfc080) [0053.583] I> Slot: 0 [0053.585] I> Binary[16] block-268435456 (partition size: 0x400000) [0053.591] I> Binary name: BPMP_FW_DTB [0053.595] I> Size of crypto header is 8192 [0053.599] I> Size of crypto header is 8192 [0053.603] I> BCH of BPMP_FW_DTB read from storage [0053.607] I> BCH address is : 0x807fc000 [0053.611] I> BPMP_FW_DTB header integrity check is success [0053.616] I> Binary magic in BCH component 0 is BPMD [0053.621] I> component binary type is 16 [0053.625] I> Size of crypto header is 8192 [0053.632] I> BPMP_FW_DTB binary is read from storage [0053.637] I> BPMP_FW_DTB binary integrity check is success [0053.643] I> Binary BPMP_FW_DTB loaded successfully at 0x807cc070 (0x2ff80) [0053.650] I> Task: BPMP fw ast config [0053.653] I> Task: Load psc-fw [0053.656] I> Slot: 0 [0053.658] I> Binary[17] block-285212672 (partition size: 0xc0000) [0053.664] I> Binary name: PSC_FW [0053.667] I> Size of crypto header is 8192 [0053.671] I> Size of crypto header is 8192 [0053.675] I> BCH of PSC_FW read from storage [0053.679] I> BCH address is : 0x80ffe000 [0053.683] I> PSC_FW header integrity check is success [0053.688] I> Binary magic in BCH component 0 is PFWP [0053.693] I> component binary type is 17 [0053.697] I> Size of crypto header is 8192 [0053.706] I> PSC_FW binary is read from storage [0053.711] I> PSC_FW binary integrity check is success [0053.716] I> Binary PSC_FW loaded successfully at 0x80fb4210 (0x49df0) [0053.722] I> Task: Load nvdec-fw [0053.725] I> Slot: 0 [0053.727] I> Binary[7] block-117440512 (partition size: 0x100000) [0053.733] I> Binary name: NVDEC [0053.736] I> Size of crypto header is 8192 [0053.740] I> Size of crypto header is 8192 [0053.744] I> BCH of NVDEC read from storage [0053.748] I> BCH address is : 0x800fe000 [0053.752] I> NVDEC header integrity check is success [0053.757] I> Binary magic in BCH component 0 is NDEC [0053.762] I> component binary type is 7 [0053.765] I> Size of crypto header is 8192 [0053.774] I> NVDEC binary is read from storage [0053.779] I> NVDEC binary integrity check is success [0053.784] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0053.792] I> Task: Load tsec-fw [0053.795] I> TSEC-FW load support not enabled [0053.800] I> Task: GPIO interrupt map [0053.803] I> Task: SC7 context save [0053.807] W> SC7_CONTEXT_SAVE: SC7 ctx save is not supported. [0053.812] I> Task: Load MB2/Applet/FSKP [0053.816] I> Loading MB2 [0053.818] I> Slot: 0 [0053.820] I> Binary[6] block-100663296 (partition size: 0x80000) [0053.826] I> Binary name: MB2 [0053.829] I> Size of crypto header is 8192 [0053.833] I> Size of crypto header is 8192 [0053.837] I> BCH of MB2 read from storage [0053.841] I> BCH address is : 0x8007e000 [0053.845] I> MB2 header integrity check is success [0053.849] I> Binary magic in BCH component 0 is MB2B [0053.854] I> component binary type is 6 [0053.858] I> Size of crypto header is 8192 [0053.869] I> MB2 binary is read from storage [0053.874] I> MB2 binary integrity check is success [0053.879] I> Binary MB2 loaded successfully at 0x80000000 (0x69900) [0053.885] I> Task: Map CCPLEX SHARED carveout [0053.889] I> Task: Prepare MB2 params [0053.893] I> Task: Dram ecc test [0053.896] I> Task: Misc NV security settings [0053.900] I> NVDEC sticky bits programming done [0053.905] I> Successfully powergated NVDEC [0053.909] I> Task: Disable/Reload WDT [0053.912] I> Task: Program misc carveouts [0053.916] I> Program IPC carveouts [0053.919] I> Task: Disable SCPM/POD reset [0053.923] I> SLCG Global override status := 0x0 [0053.928] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-c6a05a9f) I> t234-A01-1-Silicon (0x12347) I> Boot-mode : RCM BOOT I> Emulation: I> Entry timestamp: 0x033754cc I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x273800000, size:0x800000] I> Task: SE error check I> Task: Crypto init I> Task: MB2 Params integrity check I> Task: ARI update carveout TZDRAM I> Task: Configure OEM set LA/PTSA values I> Task: Check MC errors I> Task: Enable hot-plug capability I> Task: Set blob address I> Task: PSC mailbox init I> Task: Enable clock for external modules I> Task: I2C register I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout I> Task: Program CBB PCIE AMAP regions I> Task: Pass DRAM ECC PRL Flag to FSI I> Task: Load and authenticate registered FWs I> Task: Load AUXP FWs I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Successfully register PVA FW load task with MB2 loader I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x272e00000 I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x272a00000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x27a000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 12054896 bytes I> dce: plain binary integrity check is success I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x27a000000 I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x27d800000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x272f00000 I> pva-fw: Authentication Finalize Done I> Binary pva-fw loaded successfully at 0x273180000 I> Task: Check MC errors I> Task: Carveout setup I> Program remaining OEM carveouts I> Task: Enable FSI VMON I> Task: Restore XUSB sec I> Task: Enable FSI SE clock I> Task: Initialize SBSA UART CAR I> Task: Initialize CPUBL Params I> CPUBL-params @ 0x276000000 I> Task: Prepare eeprom data I> Task: Unpowergate APE W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: Memctrl reconfig pending clients I> Task: OEM firewalls I> OEM firewalls configured I> Task: Powergate APE I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings I> Task: Unhalt AUXPs I> Unhalting SPE.. I> Enabling combined UART ����spe: early_init ����vic initialized �⸸��tsc initialized ����aon lic initialized �ุ��spe: tag is 5243985d1b1eb3f06fac6d36bd7e74ac ����spe: SafeRTOS v8.4 �ุ��spe: init ����scheduler initialized �ุ��aon hsp initialized ����tag initialized �ุ��tcu initialized ����bpmp ipc initialized �ุ��spe: late init ����cpu_nic clock initialized �ุ��apb clock initialized ����pm initialized �ุ��bpmp hsp initialized ����top1 hsp initialized �ุ��ccplex ipc initialized ����spe: start scheduler �ุ�� I> Task: Trigger mailbox for PSC-BL1 exit I> Sending opcode 0x4d420802 to psc I> Received ACK from psc I> Task: Start secure NOR provision I> Skip Secure NOR provisioning I> Task: Trigger load FSI keyblob I> Task: Complete load FSI keyblob I> Task: MB2-PSC_FW Key Manager Init I> Sending opcode OP_PSC_KEY_MANAGER to psc-fw I> Sending opcode 0x4b45594d to psc �� hwwdt_init: WDT boot cfg 0x710010 sts 0x10 bpmp: socket 0 bpmp: base binary md5 is ac83764aab09e08198fdb2c012af5bb1 bpmp: combined binary md5 is b86e686660a68c156e5b1b2d9392af5f bpmp: firmware tag is b86e686660a68c156e5b-ac83764aab0 Write control check for CBB_CENTRAL_CBB_FIREWALL_PWM7_BLF failed, expected value: 00100008 != actual value: 0010000a address: 13a178a8 initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early initialized pm 465 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ��I> Received ACK from psc I> Task: Unhalt FSI I> FSI unhalt skipped I> Task: Unhalt AUXPs I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> ��initialized avfs_clk_platform initialized powergate ��Unhalting DCE I> DCE unhalt successful I> APE unhalt s��initialized dvs ��[ 7.173270] Camera-FW on t234-rce-safe started TCU early console enabled. ��initialized clk_mach_config suspend progress: 0x0 initialized suspend initialized strap initialized mce_dbell ��kipped I> Task: Load HV/CPUBL I> Task: Load TOS I> Task: Trigger load TSEC leyblob I> Sending opcode 0x53535452 t��initialized emc initialized emc_mrq ��o psc I> Sent opcode to psc ��initialized clk_cal initialized uphy_dt initialized uphy_mrq HSIO UPHY reset has been de-asserted 0x0 initialized uphy initialized pg_late initialized pg_mrq_init swdtimer_init: reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ��I> Task: Load and authenticate re��initialized clk_cal_late initialized noc_late initialized cvc ��gistered FWs �� DCE Started DCE��initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/2 have not matching zones 0/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zones 0/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/0 have not matching zones 1/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zones 1/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zones 2/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zones 2/1 initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable pwm3 enable sdmmc4_axicif enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable usb2_trk enable xusb_ss_dev enable xusb_fs_dev enable xusb_falcon enable dsi_lp enable xusb_core_mux enable xusb_core_dev clk_check_max_rate: pex1_c6_core rate 500000000 > max 250000000 clk_check_max_rate: pex2_c7_core rate 500000000 > max 250000000 clk_check_max_rate: pex2_c8_core rate 500000000 > max 250000000 clk_check_max_rate: pex2_c9_core rate 500000000 > max 250000000 clk_check_max_rate: pex2_c10_core rate 500000000 > max 250000000 clk_check_max_rate: pex0_c0_core rate 500000000 > max 250000000 clk_check_max_rate: pex0_c1_cor��[ 7.427098] Camera-FW on t234-rce-safe ready SHA1=e2238c99 (crt 12.417 ms,��e rate 500000000 > max 250000000 clk_check_max_rate: pex0_c2_core rate 500000�� total boot 267.316 ms) ��000 > max 250000000 clk_check_max_rate: pex0_c3_core rate 500000000 > max 250000000 clk_check_max_rate: pex0_c4_core rate 500000000 > max 250000000 clk_check_max_rate: pex1_c5_core rate 500000000 > max 250000000 initialized clk_mach_post initialized pg_post initialized regulator_post initialized profile initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete ��I> MB2-params @ 0x40060000 I> NSDRAM carveout base: 0x80000000, size: 0x1f25f0000 I> cpubl_params: nsdram: carveout: 1, encryption: 1 ��_R5_Init MPU enabled DCE_SW_Init Admin Task Init Admin Task Init complete Print Task Init RM Task Init SHA Task Init Admin Task Started DCE SC7 SHA Enabled RM Task Started��I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0x272000000 �� RM Task Running Print Task Started Print Task Running SHA Task Started SHA Task Running DCE: FW Boot Complete Admin Task Running ��I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0xc1dc03f0 I> Relocating OP-TEE dtb from: 0xc1eff4e0 to 0xbe040020, size: 0x2837 I> [0] START: 0x80000000, SIZE: 0x1f25f0000 I> [1] START: 0x276000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0xbe020000 I> EKB detected (length: 0x410) @ VA:0xbe020000 I> Task: Add cpubl params integrity check I> Added cpubl params digest. I> Task: Prepare TOS params I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0xbe040020 I> NVRNG: Health check success I> NVRNG: Health check success I> Task: Disable MSS perf stats I> Task: Program display sticky bits I> Task: SMMU external bypass disable I> Task: SMMU init I> Task: Program GICv3 registers I> Task: Audit firewall settings I> Task: Clear dec source key I> MB2 finished ��NOTICE: BL31: v2.8(release):8a7f432be NOTICE: BL31: Built : 10:30:22, Nov 30 2023 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.22 (gcc version 11.3.0 (Buildroot 2022.08)) #2 Thu Nov 30 18:39:35 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Test OEM keys are being used. This is insecure for shipping products! I/TC: Primary CPU switching to normal world boot �� Jetson UEFI firmware (version 36.2.0-gcid-34956989 built on 2023-11-30T18:35:35+00:00) ��E/TC:?? 00 get_rpc_alloc_res:645 RPC allocation failed. Non-secure world result: ret=0xffff0000 ret_origin=0 E/LD: init_elf:486 sys_open_ta_bin(bc50d971-d4c9-42c4-82cb-343fb7f37896) E/TC:?? 00 ldelf_init_with_ldelf:131 ldelf failed with res: 0xffff000c �� ��[ 9.447550] Camera-FW on t234-rce-safe ready SHA1=e2238c99 (crt 1.402 ms, total boot 95.101 ms) �� Jetson System firmware version 36.2.0-gcid-34956989 date 2023-11-30T18:35:35+00: 00 ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. .....EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services... ��debugfs initialized ��I/TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled ��[ 0.000000] Booting Linux on physical CPU 0x0000010200 [0x410fd421] [ 0.000000] Linux version 5.15.122-tegra (buildbrain@mobile-u64-6517-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2022.08) 11.3.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Thu Nov 30 ) [ 0.000000] Machine model: NVIDIA Jetson Orin Nano Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: SMBIOS=0xffff0000 SMBIOS 3.0=0x23b660000 MEMATTR=0x2359d0018 RNG=0x228160018 MEMRESERVE=0x229d3af18 [ 0.000000] random: crng init done [ 0.000000] secureboot: Secure boot disabled [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000261000000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x0000000277ffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x27131d800-0x27131ffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000277ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bdffffff] [ 0.000000] node 0: [mem 0x00000000c2000000-0x00000000fdfdffff] [ 0.000000] node 0: [mem 0x00000000fdfe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022c67afff] [ 0.000000] node 0: [mem 0x000000022c67b000-0x000000022c85bfff] [ 0.000000] node 0: [mem 0x000000022c85c000-0x0000000239d3ffff] [ 0.000000] node 0: [mem 0x0000000239d40000-0x000000023bc7ffff] [ 0.000000] node 0: [mem 0x000000023bc80000-0x0000000271dfffff] [ 0.000000] node 0: [mem 0x0000000271e00000-0x0000000271ffffff] [ 0.000000] node 0: [mem 0x0000000272000000-0x000000027259ffff] [ 0.000000] node 0: [mem 0x0000000276000000-0x0000000277ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000277ffffff] [ 0.000000] On node 0, zone DMA: 16384 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 14944 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 29 pages/cpu s80344 r8192 d30248 u118784 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Address authentication (architected algorithm) [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Hardware dirty bit management [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] alternatives: patching kernib/modcodulee .12[ 0a/e0000] a/dlt ers1 z/net/eonethelists, motekbil/r8 gring on. al es: 2000800 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/initrd rw rootwai_ret me_acceit_sslevel=4 consenable remot=tte aU0,200ccess firmware_class.path=/etc/firmware fbcon=map:0 net.modifn /lib/modules/5_pr.12of_0 000 [ 0.000000] Unknown kernel command line parameteinsmod /lib/module_pr.15of_dategra/kaptr=2drivers/pci/con@0xller/dwc/pcie-tegra194.ko _pr of_ro_ptr=65536@0x271E00000", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000f9fe0000-0x00000000fdfe0000] (64MB) [ 0.000000] Memory: 7472336K/8132224K available (19712K kernel code, 4056K rwdata, 9960K rodata, 7680K init, 528K bss, 397744K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 10200 region 0:0x000000000f500000 [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000001] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000360] Console: colour dummy device 80x25 [ 0.000419] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000427] pid_max: default: 32768 minimum: 301 [ 0.000464] LSM: Security Framework initializing [ 0.000487] Yama: becoming mindful. [ 0.000502] SELinux: Initializing. [ 0.000579] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000594] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001673] rcu: Hierarchical SRCU implementation. [ 0.003730] Tegra Revision: A01 SKU: 213 CPU Process: 0 SoC Process: 0 [ 0.004043] Remapping and enabling EFI services. [ 0.004840] smp: Bringing up secondary CPUs ... [ 0.005319] Detected PIPT I-cache on CPU1 [ 0.005361] GICv3: CPU1: found redistributor 10300 region 0:0x000000000f520000 [ 0.005383] CPU1: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.007882] Detected PIPT I-cache on CPU2 [ 0.007914] GICv3: CPU2: found redistributor 20000 region 0:0x000000000f540000 [ 0.007943] CPU2: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.008447] Detected PIPT I-cache on CPU3 [ 0.008460] GICv3: CPU3: found redistributor 20100 region 0:0x000000000f560000 [ 0.008478] CPU3: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.008941] Detected PIPT I-cache on CPU4 [ 0.008955] GICv3: CPU4: found redistributor 20200 region 0:0x000000000f580000 [ 0.008970] CPU4: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.009431] Detected PIPT I-cache on CPU5 [ 0.009445] GICv3: CPU5: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.009460] CPU5: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.009519] smp: Brought up 1 node, 6 CPUs [ 0.009524] SMP: Total of 6 processors activated. [ 0.009529] CPU features: detected: 32-bit EL0 Support [ 0.009531] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.009533] CPU features: detected: Common not Private translations [ 0.009534] CPU features: detected: CRC32 instructions [ 0.009536] CPU features: detected: Data cache clean to Point of Persistence [ 0.009537] CPU features: detected: Generic authentication (architected algorithm) [ 0.009538] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.009539] CPU features: detected: LSE atomic instructions [ 0.009541] CPU features: detected: Privileged Access Never [ 0.009542] CPU features: detected: RAS Extension Support [ 0.009545] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.046846] CPU: All CPU(s) started at EL2 [ 0.050049] devtmpfs: initialized [ 0.069138] KASLR enabled [ 0.069325] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.069351] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.074394] pinctrl core: initialized pinctrl subsystem [ 0.075425] SMBIOS 3.6.0 present. [ 0.075439] DMI: Unknown NVIDIA Jetson Orin Nano Developer Kit/NVIDIA Jetson Orin Nano Developer Kit, BIOS 36.2.0-gcid-34956989 11/30/2023 [ 0.075997] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.077768] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.077905] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.077995] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.078044] audit: initializing netlink subsys (disabled) [ 0.078153] audit: type=2000 audit(0.076:1): state=initialized audit_enabled=0 res=1 [ 0.079736] thermal_sys: Registered thermal governor 'step_wise' [ 0.079740] thermal_sys: Registered thermal governor 'user_space' [ 0.079741] thermal_sys: Registered thermal governor 'power_allocator' [ 0.083158] cpuidle: using governor menu [ 0.083373] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.083472] ASID allocator initialised with 32768 entries [ 0.085268] Serial: AMBA PL011 UART driver [ 0.086385] printk: console [ramoops-1] enabled [ 0.086392] pstore: Registered ramoops as persistent store backend [ 0.086399] ramoops: using 0x200000@0x2725f0000, ecc: 0 [ 0.095624] tegra-mc 2c00000.memory-controller: unknown: write @0x00000000500604c0: Security violation (TrustZone violation) [ 0.096466] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 116, base_baud = 0) is a SBSA [ 0.108696] platform bpmp: Fixing up cyclic dependency with 2c60000.external-memory-controller [ 0.118383] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.118392] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.118394] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.118396] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.119374] cryptd: max_cpu_qlen set to 1000 [ 0.121068] ACPI: Interpreter disabled. [ 0.122502] VDD_1V8_AO: supplied by VDD_5V0_SYS [ 0.122669] VDD_3V3_AO: supplied by VDD_5V0_SYS [ 0.123027] VDD_AV10_HUB: supplied by VDD_5V0_SYS [ 0.123421] iommu: Default domain type: Translated [ 0.123428] iommu: DMA domain TLB invalidation policy: strict mode [ 0.123747] SCSI subsystem initialized [ 0.123938] vgaarb: loaded [ 0.124102] usbcore: registered new interface driver usbfs [ 0.124127] usbcore: registered new interface driver hub [ 0.124150] usbcore: registered new device driver usb [ 0.124623] pps_core: LinuxPPS API ver. 1 registered [ 0.124629] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.124636] PTP clock support registered [ 0.124720] EDAC MC: Ver: 3.0.0 [ 0.125810] Registered efivars operations [ 0.126433] FPGA manager framework [ 0.126548] Advanced Linux Sound Architecture Driver Initialized. [ 0.127530] clocksource: Switched to clocksource arch_sys_counter [ 0.162778] VFS: Disk quotas dquot_6.6.0 [ 0.162844] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.163080] pnp: PnP ACPI: disabled [ 0.166828] NET: Registered PF_INET protocol family [ 0.167124] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.168807] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.168829] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.168842] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.168943] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.170272] TCP: Hash tables configured (established 65536 bind 65536) [ 0.170428] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.170459] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.170628] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.171045] RPC: Registered named UNIX socket transport module. [ 0.171050] RPC: Registered udp transport module. [ 0.171051] RPC: Registered tcp transport module. [ 0.171054] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.171071] PCI: CLS 0 bytes, default 64 [ 0.171291] Unpacking initramfs... [ 0.180715] hw perfevents: enabled with armv8_cortex_a78 PMU driver, 7 counters available [ 0.181062] kvm [1]: IPA Size Limit: 48 bits [ 0.181099] kvm [1]: GICv3: no GICV resource entry [ 0.181108] kvm [1]: disabling GICv2 emulation [ 0.181128] kvm [1]: GIC system register CPU interface enabled [ 0.181216] kvm [1]: vgic interrupt IRQ9 [ 0.181390] kvm [1]: VHE mode initialized successfully [ 0.184599] Initialise system trusted keyrings [ 0.184758] workingset: timestamp_bits=42 max_order=21 bucket_order=0 [ 0.188467] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.188861] NFS: Registering the id_resolver key type [ 0.188888] Key type id_resolver registered [ 0.188893] Key type id_legacy registered [ 0.188959] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.188973] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.189002] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.189226] 9p: Installing v9fs 9p2000 file system support [ 0.204754] NET: Registered PF_ALG protocol family [ 0.204770] Key type asymmetric registered [ 0.204775] Asymmetric key parser 'x509' registered [ 0.204832] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.204840] io scheduler mq-deadline registered [ 0.204847] io scheduler kyber registered [ 0.216046] EINJ: ACPI disabled. [ 0.229613] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.231533] SuperH (H)SCI(F) driver initialized [ 0.231920] msm_serial: driver initialized [ 0.232552] printk: console [ttyTCU0] enabled [ 0.233497] arm-smmu 8000000.iommu: probing hardware configuration... [ 0.233504] arm-smmu 8000000.iommu: SMMUv2 with: [ 0.233511] arm-smmu 8000000.iommu: stage 1 translation [ 0.233514] arm-smmu 8000000.iommu: stage 2 translation [ 0.233519] arm-smmu 8000000.iommu: nested translation [ 0.233528] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 0.233536] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 0.233555] arm-smmu 8000000.iommu: Supported page sizes: 0x61311000 [ 0.233557] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.233561] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.234632] arm-smmu 10000000.iommu: probing hardware configuration... [ 0.234637] arm-smmu 10000000.iommu: SMMUv2 with: [ 0.234639] arm-smmu 10000000.iommu: stage 1 translation [ 0.234640] arm-smmu 10000000.iommu: stage 2 translation [ 0.234643] arm-smmu 10000000.iommu: nested translation [ 0.234647] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 0.234649] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 0.234656] arm-smmu 10000000.iommu: Supported page sizes: 0x61311000 [ 0.234658] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.234661] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.235081] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.235084] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.235088] arm-smmu 12000000.iommu: stage 1 translation [ 0.235089] arm-smmu 12000000.iommu: stage 2 translation [ 0.235090] arm-smmu 12000000.iommu: nested translation [ 0.235093] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 0.235095] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 0.235100] arm-smmu 12000000.iommu: Supported page sizes: 0x61311000 [ 0.235102] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.235103] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.242724] loop: module loaded [ 0.243533] megasas: 07.717.02.00-rc1 [ 0.247757] tun: Universal TUN/TAP device driver, 1.6 [ 0.248383] thunder_xcv, ver 1.0 [ 0.248416] thunder_bgx, ver 1.0 [ 0.248440] nicpf, ver 1.0 [ 0.249354] hclge is initializing [ 0.249381] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.249389] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.249430] e1000: Intel(R) PRO/1000 Network Driver [ 0.249438] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.249469] e1000e: Intel(R) PRO/1000 Network Driver [ 0.249474] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.249501] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.249508] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.249526] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.249532] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.249755] sky2: driver version 1.30 [ 0.250482] VFIO - User Level meta-driver version: 0.3 [ 0.252108] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.252119] ehci-pci: EHCI PCI platform driver [ 0.252158] ehci-platform: EHCI generic platform driver [ 0.252239] ehci-orion: EHCI orion driver [ 0.252320] ehci-exynos: EHCI Exynos driver [ 0.252383] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.252405] ohci-pci: OHCI PCI platform driver [ 0.252429] ohci-platform: OHCI generic platform driver [ 0.252507] ohci-exynos: OHCI Exynos driver [ 0.253002] usbcore: registered new interface driver usb-storage [ 0.254885] rtc-efi rtc-efi.0: registered as rtc0 [ 0.254934] rtc-efi rtc-efi.0: setting system clock to 1970-01-01T00:06:16 UTC (376) [ 0.255402] i2c_dev: i2c /dev entries driver [ 0.258986] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 0.260944] sdhci: Secure Digital Host Controller Interface driver [ 0.260950] sdhci: Copyright(c) Pierre Ossman [ 0.261458] Synopsys Designware Multimedia Card Interface Driver [ 0.262133] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.263357] ledtrig-cpu: registered to indicate activity on CPUs [ 0.264275] SMCCC: SOC_ID: ID = jep106:036b:0234 Revision = 0x00000401 [ 0.264844] tegra-bpmp bpmp: Adding to iommu group 0 [ 0.266198] tegra-bpmp bpmp: firmware: b86e686660a68c156e5b-ac83764aab0 [ 0.630807] Freeing initrd memory: 28396K [ 1.686518] clocksource: tsc: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 1.686554] clocksource: osc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 49772407460 ns [ 1.686559] clocksource: usec: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 1.687233] usbcore: registered new interface driver usbhid [ 1.687240] usbhid: USB HID core driver [ 1.691562] optee: probing for conduit method. [ 1.691622] optee: revision 3.22 (1b7f2993) [ 1.750830] optee: dynamic shared memory is enabled [ 1.751106] optee: initialized driver [ 1.753315] usbcore: registered new interface driver snd-usb-audio [ 1.755069] NET: Registered PF_PACKET protocol family [ 1.755359] 9pnet: Installing 9P2000 support [ 1.755465] Key type dns_resolver registered [ 1.756269] printk: console [ttyTCU0]: printing thread started [ 1.756330] printk: console [ramoops-1]: printing thread started [ 1.756410] Loading compiled-in X.509 certificates [ 1.766951] Loaded X.509 cert 'Build time autogenerated kernel key: 6df01ab60d1edfd9b484fde1a886c193293a8ad8' [ 1.771259] pstore: Using crash dump compression: deflate [ 1.800703] tegra-gpcdma 2600000.dma-controller: Adding to iommu group 1 [ 1.802128] tegra-gpcdma 2600000.dma-controller: GPC DMA driver register 31 channels [ 1.803478] serial-tegra 3100000.serial: RX in PIO mode [ 1.803484] serial-tegra 3100000.serial: TX in PIO mode [ 1.803570] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 112, base_baud = 0) is a TEGRA_UART [ 1.804105] serial-tegra 3140000.serial: RX in PIO mode [ 1.804109] serial-tegra 3140000.serial: TX in PIO mode [ 1.804144] 3140000.serial: ttyTHS2 at MMIO 0x3140000 (irq = 196, base_baud = 0) is a TEGRA_UART [ 1.806034] tegra_rtc c2a0000.rtc: registered as rtc1 [ 1.806044] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.806485] tegra-i2c 3160000.i2c: Adding to iommu group 1 [ 1.809269] tegra-i2c 3180000.i2c: Adding to iommu group 1 [ 1.810722] tegra-i2c 31b0000.i2c: Adding to iommu group 1 [ 1.812041] tegra-i2c c240000.i2c: Adding to iommu group 1 [ 1.813206] i2c 1-0025: Fixing up cyclic dependency with 3520000.padctl [ 1.813742] tegra-i2c c250000.i2c: Adding to iommu group 1 [ 1.832854] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1553000 KHz, changing to: 1510400 KHz [ 1.835354] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 1558000 KHz, changing to: 1510400 KHz [ 1.837174] sdhci-tegra 3400000.mmc: Adding to iommu group 2 [ 1.842473] sdhci-tegra 3400000.mmc: Got CD GPIO [ 1.843466] tegra-xusb 3610000.usb: Adding to iommu group 3 [ 1.860812] tegra-xusb 3610000.usb: Firmware timestamp: 2023-02-10 03:48:10 UTC [ 1.860822] tegra-xusb 3610000.usb: xHCI Host Controller [ 1.860850] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 1 [ 1.861586] tegra-xusb 3610000.usb: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000010810 [ 1.861615] tegra-xusb 3610000.usb: irq 122, io mem 0x03610000 [ 1.861744] tegra-xusb 3610000.usb: xHCI Host Controller [ 1.861749] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 2 [ 1.861752] tegra-xusb 3610000.usb: Host supports USB 3.1 Enhanced SuperSpeed [ 1.862008] hub 1-0:1.0: USB hub found [ 1.862024] hub 1-0:1.0: 4 ports detected [ 1.862319] hub 2-0:1.0: USB hub found [ 1.862330] hub 2-0:1.0: 4 ports detected [ 1.891126] irq: IRQ223: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [ 1.891497] mmc0: SDHCI controller on 3400000.mmc [3400000.mmc] using ADMA 64-bit [ 1.892511] irq: IRQ224: trimming hierarchy from :bus@0:pmc@c360000 [ 1.892572] irq: IRQ225: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [ 1.892618] irq: IRQ226: trimming hierarchy from :bus@0:pmc@c360000 [ 1.892687] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.930841] ALSA device list: [ 1.930846] No soundcards found. [ 1.934291] Freeing unused kernel memory: 7680K [ 1.934378] Run /init as init process [ 1.951860] Root device found: initrd [ 1.967079] r8168: loading out-of-tree module taints kernel. [ 1.969545] Mount initrd as rootfs and enter recovery mode [ 2.007594] tegra194-pcie 140a0000.pcie: Adding to iommu group 4 [ 2.116184] tegra194-pcie 140a0000.pcie: host bridge /bus@0/pcie@140a0000 ranges: [ 2.116210] tegra194-pcie 140a0000.pcie: MEM 0x3240000000..0x3527ffffff -> 0x3240000000 [ 2.116218] tegra194-pcie 140a0000.pcie: MEM 0x3528000000..0x352fffffff -> 0x0040000000 [ 2.116223] tegra194-pcie 140a0000.pcie: IO 0x002a100000..0x002a1fffff -> 0x002a100000 [ 2.116545] tegra194-pcie 140a0000.pcie: iATU unroll: enabled [ 2.116547] tegra194-pcie 140a0000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 2.203523] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.223709] tegra194-pcie 140a0000.pcie: Link up [ 2.226659] tegra194-pcie 140a0000.pcie: Link up [ 2.226747] tegra194-pcie 140a0000.pcie: PCI host bridge to bus 0008:00 [ 2.226752] pci_bus 0008:00: root bus resource [io 0x0000-0xfffff] (bus address [0x2a100000-0x2a1fffff]) [ 2.226758] pci_bus 0008:00: root bus resource [mem 0x3528000000-0x352fffffff] (bus address [0x40000000-0x47ffffff]) [ 2.226762] pci_bus 0008:00: root bus resource [bus 00-ff] [ 2.226764] pci_bus 0008:00: root bus resource [mem 0x3240000000-0x3527ffffff pref] [ 2.226815] pci 0008:00:00.0: [10de:229c] type 01 class 0x060400 [ 2.226974] pci 0008:00:00.0: PME# supported from D0 D3hot [ 2.230716] pci 0008:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.230874] pci 0008:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 2.230876] pci 0008:01:00.0: reg 0x10: [io size 0x0100] [ 2.231058] pci 0008:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.231175] pci 0008:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.232169] pci 0008:01:00.0: supports D1 D2 [ 2.232171] pci 0008:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.246681] pci 0008:00:00.0: BAR 14: assigned [mem 0x3528000000-0x35280fffff] [ 2.246684] pci 0008:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.246689] pci 0008:01:00.0: BAR 4: assigned [mem 0x3528000000-0x3528003fff 64bit] [ 2.246783] pci 0008:01:00.0: BAR 2: assigned [mem 0x3528004000-0x3528004fff 64bit] [ 2.246876] pci 0008:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.246905] pci 0008:00:00.0: PCI bridge to [bus 01-ff] [ 2.246909] pci 0008:00:00.0: bridge window [io 0x1000-0x1fff] [ 2.246913] pci 0008:00:00.0: bridge window [mem 0x3528000000-0x35280fffff] [ 2.247010] pcieport 0008:00:00.0: Adding to iommu group 4 [ 2.247109] pcieport 0008:00:00.0: PME: Signaling with IRQ 188 [ 2.247675] pcieport 0008:00:00.0: AER: enabled with IRQ 188 [ 2.247863] r8168 0008:01:00.0: Adding to iommu group 4 [ 2.247920] r8168 Gigabit Ethernet driver 8.051.02.10m_pll-NAPI loaded [ 2.247979] r8168 0008:01:00.0: enabling device (0000 -> 0003) [ 2.265074] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.267125] r8168 Copyright (C) 2022 Realtek NIC software team [ 2.267125] This program comes with ABSOLUTELY NO WARRANTY; for details, please see . [ 2.267125] This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.267247] tegra194-pcie 14100000.pcie: Adding to iommu group 5 [ 2.271107] tegra194-pcie 14100000.pcie: host bridge /bus@0/pcie@14100000 ranges: [ 2.271132] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 2.271140] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 2.271144] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 2.271641] tegra194-pcie 14100000.pcie: iATU unroll: enabled [ 2.271646] tegra194-pcie 14100000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 2.378074] hub 1-2:1.0: USB hub found [ 2.379195] hub 1-2:1.0: 4 ports detected [ 2.379708] tegra194-pcie 14100000.pcie: Link up [ 2.382242] tegra194-pcie 14100000.pcie: Link up [ 2.382318] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 2.382323] pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x30100000-0x301fffff]) [ 2.382327] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 2.382331] pci_bus 0001:00: root bus resource [bus 00-ff] [ 2.382333] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 2.382378] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 2.382542] pci 0001:00:00.0: PME# supported from D0 D3hot [ 2.386052] pci 0001:01:00.0: [10ec:c822] type 00 class 0x028000 [ 2.386227] pci 0001:01:00.0: reg 0x10: [io 0x100000-0x1000ff] [ 2.386430] pci 0001:01:00.0: reg 0x18: [mem 0x20a8000000-0x20a800ffff 64bit] [ 2.387494] pci 0001:01:00.0: supports D1 D2 [ 2.387496] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.402670] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff] [ 2.402674] pci 0001:00:00.0: BAR 13: assigned [io 0x100000-0x100fff] [ 2.402678] pci 0001:01:00.0: BAR 2: assigned [mem 0x20a8000000-0x20a800ffff 64bit] [ 2.402782] pci 0001:01:00.0: BAR 0: assigned [io 0x100000-0x1000ff] [ 2.402814] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 2.402817] pci 0001:00:00.0: bridge window [io 0x100000-0x100fff] [ 2.402821] pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 2.402910] pcieport 0001:00:00.0: Adding to iommu group 5 [ 2.402999] pcieport 0001:00:00.0: PME: Signaling with IRQ 190 [ 2.403923] pcieport 0001:00:00.0: AER: enabled with IRQ 190 [ 2.404275] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 2.406343] tegra194-pcie 14160000.pcie: host bridge /bus@0/pcie@14160000 ranges: [ 2.406358] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 2.406365] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 2.406369] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 2.406667] tegra194-pcie 14160000.pcie: iATU unroll: enabled [ 2.406670] tegra194-pcie 14160000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 2.492764] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using tegra-xusb [ 2.511708] tegra194-pcie 14160000.pcie: Link up [ 2.512690] tegra194-pcie 14160000.pcie: Link up [ 2.512751] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.512755] pci_bus 0004:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x36100000-0x361fffff]) [ 2.512758] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 2.512761] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.512763] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 2.512807] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 2.512960] pci 0004:00:00.0: PME# supported from D0 D3hot [ 2.516355] pci 0004:01:00.0: [1987:5013] type 00 class 0x010802 [ 2.516550] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.530632] pci 0004:00:00.0: BAR 14: assigned [mem 0x2428000000-0x24280fffff] [ 2.530638] pci 0004:01:00.0: BAR 0: assigned [mem 0x2428000000-0x2428003fff 64bit] [ 2.530724] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.530729] pci 0004:00:00.0: bridge window [mem 0x2428000000-0x24280fffff] [ 2.530818] pcieport 0004:00:00.0: Adding to iommu group 6 [ 2.530902] pcieport 0004:00:00.0: PME: Signaling with IRQ 192 [ 2.532303] pcieport 0004:00:00.0: AER: enabled with IRQ 192 [ 2.532589] tegra194-pcie 141e0000.pcie: Adding to iommu group 7 [ 2.536123] tegra194-pcie 141e0000.pcie: host bridge /bus@0/pcie@141e0000 ranges: [ 2.536149] tegra194-pcie 141e0000.pcie: MEM 0x3000000000..0x3227ffffff -> 0x3000000000 [ 2.536156] tegra194-pcie 141e0000.pcie: MEM 0x3228000000..0x322fffffff -> 0x0040000000 [ 2.536161] tegra194-pcie 141e0000.pcie: IO 0x003e100000..0x003e1fffff -> 0x003e100000 [ 2.536498] tegra194-pcie 141e0000.pcie: iATU unroll: enabled [ 2.536501] tegra194-pcie 141e0000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 2.541703] hub 2-1:1.0: USB hub found [ 2.544123] hub 2-1:1.0: 4 ports detected [ 2.554170] usb usb2-port2: config error [ 2.651522] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 3.645547] tegra194-pcie 141e0000.pcie: Phy link never came up [ 4.647405] tegra194-pcie 141e0000.pcie: Phy link never came up [ 4.647469] tegra194-pcie 141e0000.pcie: PCI host bridge to bus 0007:00 [ 4.647473] pci_bus 0007:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x3e100000-0x3e1fffff]) [ 4.647477] pci_bus 0007:00: root bus resource [mem 0x3228000000-0x322fffffff] (bus address [0x40000000-0x47ffffff]) [ 4.647480] pci_bus 0007:00: root bus resource [bus 00-ff] [ 4.647482] pci_bus 0007:00: root bus resource [mem 0x3000000000-0x3227ffffff pref] [ 4.647557] pci 0007:00:00.0: [10de:229a] type 01 class 0x060400 [ 4.647706] pci 0007:00:00.0: PME# supported from D0 D3hot [ 4.653893] pci 0007:00:00.0: PCI bridge to [bus 01-ff] [ 4.653993] pcieport 0007:00:00.0: Adding to iommu group 7 [ 4.654077] pcieport 0007:00:00.0: PME: Signaling with IRQ 194 [ 4.654665] pcieport 0007:00:00.0: AER: enabled with IRQ 194 [ 4.654895] pci_bus 0007:01: busn_res: [bus 01-ff] is released [ 4.654983] pci 0007:00:00.0: Removing from iommu group 7 [ 4.654992] pci_bus 0007:00: busn_res: [bus 00-ff] is released insmod /lib/modules/5.15.122-tegra/kernel/drivers/nvme/host/nvme-core.ko insmod /lib/modules/5.15.122-tegra/kernel/drivers/nvme/host/nvme.ko [ 4.668726] nvme 0004:01:00.0: Adding to iommu group 6 [ 4.668915] nvme nvme0: pci function 0004:01:00.0 [ 4.669148] nvme 0004:01:00.0: enabling device (0000 -> 0002) [ 4.678577] nvme nvme0: missing or invalid SUBNQN field. [ 4.701531] nvme nvme0: allocated 128 MiB host memory buffer. [ 4.705395] nvme nvme0: 6/0/0 default/read/poll queues [ 4.707415] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 insmod /lib/modules/5.15.122-tegra/kernel/drivers/thermal/tegra/tegra-bpmp-thermal.ko insmod /lib/modules/5.15.122-tegra/kernel/drivers/hwmon/pwm-fan.ko insmod /lib/modules/5.15.122-tegra/kernel/drivers/usb/gadget/libcomposite.ko insmod /lib/modules/5.15.122-tegra/kernel/drivers/usb/typec/typec.ko insmod /lib/modules/5.15.122-tegra/kernel/drivers/usb/typec/ucsi/typec_ucsi.ko insmod /lib/modules/5.15.122-tegra/kernel/drivers/usb/typec/ucsi/ucsi_ccg.ko insmod /lib/modules/5.15.122-tegra/kernel/drivers/usb/gadget/udc/tegra-xudc.ko [ 4.755253] tegra-xudc 3550000.usb: Adding to ioinsmmu /lib/modules/5.15.122-tegra/kernel/net/ipv6/ipv6.ko [ 4.774317] NET: Registered PF_INET6 protocol family [ 4.774761] Segment Routing with IPv6 [ 4.774768] In-situ OAM (IOAM) with IPv6 insmod /lib/modules/5.15.122-tegra/extra/drivers/staging/platform/tegra/gte/tegra194_gte.ko insmod /lib/modules/5.15.122-tegra/extra/drivers/nvpps/nvpps.ko [ 4.784394] teginsmod /lib/modules/5.15.122-tegra/extra/drivers/net/ethernet/nvidia/nvetheilet/nd: hernet.ko nat and/or required key missing - tainting kernel insmod /lib/modules/5.15.122-tegra/kernel/drivers/usb/typec/stusb160x.ko insmod /lib/modules/5.15.122-tegra/extra/drivers/platform/tegra/mce/tegra-mce.ko [ 4.824074] tegra-qspi 3270000.spi: Adding to iommu group 9 [ 4.824638] tegra-qspi 3270000.spi: Prod config not found for QSPI: -19 [ 4.825723] spi-nor spi0.0: mx25u51279g (65536 Kbytes) [ 6.623767] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 6.623792] usb usb2-port2: config error [ 10.699761] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 10.699783] usb usb2-port2: config error [ 14.771768] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 14.771790] usb usb2-port2: config error [ 18.843765] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 18.843789] usb usb2-port2: config error [ 22.915764] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 22.915787] usb usb2-port2: config error [ 26.987768] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 26.987792] usb usb2-port2: config error [ 31.059764] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 31.059787] usb usb2-port2: config error [ 35.135766] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 35.135789] usb usb2-port2: config error [ 39.207767] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 39.207790] usb usb2-port2: config error [ 43.279764] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 43.279785] usb usb2-port2: config error [ 47.351761] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 47.351783] usb usb2-port2: config error [ 51.423762] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 51.423784] usb usb2-port2: config error [ 55.495761] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 55.495783] usb usb2-port2: config error [ 59.571766] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 59.571788] usb usb2-port2: config error [ 63.643796] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 63.643819] usb usb2-port2: config error [ 65.925529] using random self ethernet address [ 65.925534] using random host ethernet address [ 65.932256] Mass Storage Function, version: 2009/09/11 [ 65.932260] LUN: removable file: (no medium) [ 65.933594] LUN: removable file: (no medium) [ 65.934829] LUN: removable file: (no medium) [ 65.936042] LUNAddev/: rnvme0nvab1 le file: (no medium) [ 65.938796] usb0: HOST MAC a2:e8:77:7a:f1:e4 [ 65.938801] usb0: MAC 4a:0e:cc:4d:8f:23 [ 65.940018] tegra-xudc 3550000.usb: EP 0 (type: ctrl, dir: out) enabled bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash-5.1# [ 66.649556] tegra-xudc 3550000.usb: EP 5 (type: intr, dir: in) enabled [ 66.649576] tegra-xudc 3550000.usb: EP 3 (type: bulk, dir: in) enabled [ 66.649589] tegra-xudc 3550000.usb: EP 2 (type: bulk, dir: out) enabled [ 66.649709] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 66.649872] tegra-xudc 3550000.usb: EP 7 (type: bulk, dir: in) enabled [ 66.649890] tegra-xudc 3550000.usb: EP 4 (type: bulk, dir: out) enabled [ 67.719788] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 67.719810] usb usb2-port2: config error [ 71.791723] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?