[0000.078] I> MB1 (version: 1.4.0.4-t234-54845784-e89ea9bc)
[0000.084] I> t234-A01-1-Silicon (0x12347) Prod
[0000.088] I> Boot-mode : Coldboot
[0000.091] I> Entry timestamp: 0x00000000
[0000.095] I> last_boot_error: 0x0
[0000.098] I> BR-BCT: preprod_dev_sign: 0
[0000.102] I> rst_source: 0xb, rst_level: 0x1
[0000.106] I> Task: SE error check
[0000.109] I> Task: Bootchain select WAR set
[0000.113] I> Task: Enable SLCG
[0000.116] I> Task: CRC check
[0000.119] I> Task: Initialize MB2 params
[0000.123] I> MB2-params @ 0x40060000
[0000.126] I> Task: Crypto init
[0000.129] I> Task: Perform MB1 KAT tests
[0000.133] I> Task: NVRNG health check
[0000.137] I> NVRNG: Health check success
[0000.140] I> Task: MSS Bandwidth limiter settings for iGPU clients
[0000.146] I> Task: Enabling and initialization of Bandwidth limiter
[0000.153] I> No request to configure MBWT settings for any PC!
[0000.158] I> Task: Secure debug controls
[0000.162] I> Task: strap war set
[0000.165] I> Task: Initialize SOC Therm
[0000.169] I> Task: Program NV master stream id
[0000.173] I> Task: Verify boot mode
[0000.179] I> Task: Alias fuses
[0000.182] W> FUSE_ALIAS: Fuse alias on production fused part is not supported.
[0000.189] I> Task: Print SKU type
[0000.192] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c8
[0000.198] I> FUSE_OPT_GPC_DISABLE = 0x00000002
[0000.202] I> FUSE_OPT_TPC_DISABLE = 0x000000f0
[0000.206] I> FUSE_OPT_DLA_DISABLE = 0x00000003
[0000.210] I> FUSE_OPT_PVA_DISABLE = 0x00000001
[0000.215] I> FUSE_OPT_NVENC_DISABLE = 0x00000001
[0000.219] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000
[0000.224] I> FUSE_OPT_FSI_DISABLE = 0x00000001
[0000.228] I> FUSE_OPT_EMC_DISABLE = 0x0000000c
[0000.232] I> FUSE_BOOTROM_PATCH_VERSION = 0x7
[0000.236] I> FUSE_PSCROM_PATCH_VERSION = 0x7
[0000.240] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2
[0000.245] I> FUSE_SKU_INFO_0 = 0xd5
[0000.248] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS
[0000.252] I> FUSE_PACKAGE_INFO_0 = 0x2
[0000.256] I> SKU: Prod
[0000.258] I> Task: Boost clocks
[0000.261] I> Initializing NAFLL for BPMP_CPU_NIC.
[0000.266] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0
[0000.271] I> BPMP NAFLL lock success.
[0000.275] I> BPMP_CPU_NIC : src = 42, divisor = 0
[0000.279] I> Initializing PLLC2 for AXI_CBB.
[0000.284] I> AXI_CBB : src = 35, divisor = 0
[0000.288] I> Task: Voltage monitor
[0000.291] I> VMON: Vmon re-calibration and fine tuning done
[0000.296] I> Task: UPHY init
[0000.301] I> HSIO UPHY init done
[0000.304] W> Skipping GBE UPHY config
[0000.308] I> Task: Boot device init
[0000.311] I> Boot_device: QSPI_FLASH instance: 0
[0000.316] I> Qspi clock source : pllc4_muxed
[0000.320] I> QSPI Flash: Macronix 64MB
[0000.324] I> QSPI-0l initialized successfully
[0000.328] I> Task: TSC init
[0000.331] I> Task: Load membct
[0000.334] I> RAM_CODE 0x4000021
[0000.337] I> Loading MEMBCT
[0000.340] I> Slot: 0
[0000.342] I> Binary[0] block-3840 (partition size: 0x40000)
[0000.347] I> Binary name: MEM-BCT-0
[0000.350] I> Size of crypto header is 8192
[0000.354] I> Size of crypto header is 8192
[0000.358] I> strt_pg_num(3840) num_of_pgs(16) read_buf(0x40050000)
[0000.367] I> BCH of MEM-BCT-0 read from storage
[0000.371] I> BCH address is : 0x40050000
[0000.376] C> LOADER: Could not read binary 0.
[0000.380] C> MSS: Failed to load MEMBCT.
[0000.384] C> Task 0x1c failed (err: 0x48228e18)
[0000.388] E> Top caller module: MSS, error module: LOADER, reason: 0x18, aux_info: 0x8e
[0000.396] C> Boot Info Table status dump :
0111111100111000111111111111