$ sudo minicom -D /dev/ttyUSB0 Welcome to minicom 2.7.1 OPTIONS: I18n Compiled on Dec 23 2019, 02:06:26. Port /dev/ttyUSB0, 16:19:56 Press CTRL-A Z for help on special keys �� [0244.700] I> MB1 (version: 1.4.0.1-t234-54845784-08e631ca) [0244.706] I> t234-A01-1-Silicon (0x12347) Prod [0244.710] I> Boot-mode : BPMP Diagnostic [0244.714] I> Entry timestamp: 0x00000000 [0244.718] I> last_boot_error: 0x0 [0244.721] I> BR-BCT: preprod_dev_sign: 0 [0244.725] I> rst_source: 0x0, rst_level: 0x0 [0244.729] I> Task: Initialize MB2 params [0244.733] I> MB2-params @ 0x40060000 [0244.736] I> Task: Crypto init [0244.739] I> Task: Perform MB1 KAT tests [0244.743] I> Task: NVRNG health check [0244.747] I> NVRNG: Health check success [0244.751] I> Task: Secure debug controls [0244.754] I> Task: strap war set [0244.757] I> Task: Program NV master stream id [0244.762] I> Task: Verify boot mode [0244.767] I> Task: Alias fuses [0244.771] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0244.778] I> Task: Print SKU type [0244.781] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x0000000f [0244.787] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0244.791] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0244.795] I> FUSE_OPT_DLA_DISABLE = 0x00000003 [0244.800] I> FUSE_OPT_PVA_DISABLE = 0x00000001 [0244.804] I> FUSE_OPT_NVENC_DISABLE = 0x00000001 [0244.808] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0244.813] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0244.817] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0244.821] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0244.826] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0244.830] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0244.834] I> FUSE_SKU_INFO_0 = 0xd5 [0244.837] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0244.841] I> FUSE_PACKAGE_INFO_0 = 0x2 [0244.845] I> SKU: Prod [0244.847] I> Task: Boost clocks [0244.850] I> Initializing NAFLL for BPMP_CPU_NIC. [0244.855] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0244.861] I> BPMP NAFLL lock success. [0244.864] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0244.869] I> Initializing PLLC2 for AXI_CBB. [0244.873] I> AXI_CBB : src = 35, divisor = 0 [0244.877] I> Task: Voltage monitor [0244.880] I> VMON: Vmon re-calibration and fine tuning done [0244.886] I> Task: UPHY init [0244.889] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0244.895] I> Task: Boot device init [0244.898] I> Boot_device: RCM [0244.901] I> USB configuration success [0244.905] I> Task: TSC init [0244.908] I> Task: Enable WDT 5th expiry [0244.912] I> Task: I2C register [0244.914] I> Task: Set I2C bus freq [0244.918] I> Task: Reset FSI [0244.921] I> Task: Enable clock-mon [0244.925] I> FMON: Fmon re-programming done [0244.929] I> Task: Mapper init [0244.932] I> Task: MB1 fixed firewalls [0244.938] W> Firewall readback mismatch [0244.943] I> Task: Load MB2/Applet/FSKP [0244.947] I> Loading MB2 Applet [0244.950] I> Slot: 0 [0244.952] I> Binary[21] block-352321536 (partition size: 0x50000) [0244.958] I> Binary name: MB2-Applet [0244.961] I> Size of crypto header is 8192 [0244.965] I> Size of crypto header is 8192 [0244.970] I> BCH of MB2-Applet read from storage [0244.974] I> BCH address is : 0x4004e000 [0244.978] I> MB2-Applet header integrity check is success [0244.983] I> Binary magic in BCH component 0 is MB2A [0244.988] I> component binary type is 21 [0244.992] I> Size of crypto header is 8192 [0245.015] I> MB2-Applet binary is read from storage [0245.020] I> MB2-Applet binary integrity check is success [0245.025] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x42440) [0245.032] I> Task: Prepare MB2 params [0245.036] I> Task: Misc NV security settings [0245.040] I> NVDEC sticky bits programming done [0245.045] I> Successfully powergated NVDEC [0245.049] I> Task: Disable/Reload WDT [0245.052] I> Task: Program misc carveouts [0245.056] I> Task: Disable SCPM/POD reset [0245.060] I> SLCG Global override status := 0x0 [0245.064] I> MB1: MSS reconfig completed [0245.068] W> Firewall readback mismatch [0245.072] W> Firewall readback mismatch [0245.076] W> Firewall readback mismatch [0245.079] W> Firewall readback mismatch [0245.083] W> Firewall readback mismatch [0245.087] W> Firewall readback mismatch [0245.090] W> Firewall readback mismatch [0245.094] W> Firewall readback mismatch [0245.098] W> Firewall readback mismatch [0245.101] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-b648c465) I> t234-A01-1-Silicon (0x12347) Prod I> Emulation: I> Entry timestamp: 0x00000000 I> Task: Pinmux init I> Task: Crypto init I> Task: Boot device init I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: SDMMC_BOOT instance: 3 E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 0-3 I> Secondary storage device: SDMMC_USER instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 1-3 I> Secondary storage device: QSPI_FLASH instance: 0 I> Task: I2C register I> Task: Register exit handlers I> Task: Enter 3p server I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000021 I> Populate eeprom info I> Populate eeprom info for module cvm I> Rebooting : reboot-recovery �� [0005.084] I> MB1 (version: 1.4.0.1-t234-54845784-08e631ca) [0005.089] I> t234-A01-1-Silicon (0x12347) Prod [0005.093] I> Boot-mode : BPMP Diagnostic [0005.097] I> Entry timestamp: 0x00000000 [0005.101] I> last_boot_error: 0x0 [0005.104] I> BR-BCT: preprod_dev_sign: 0 [0005.108] I> rst_source: 0xb, rst_level: 0x1 [0005.112] I> Task: Initialize MB2 params [0005.116] I> MB2-params @ 0x40060000 [0005.119] I> Task: Crypto init [0005.122] I> Task: Perform MB1 KAT tests [0005.126] I> Task: NVRNG health check [0005.130] I> NVRNG: Health check success [0005.134] I> Task: Secure debug controls [0005.137] I> Task: strap war set [0005.140] I> Task: Program NV master stream id [0005.145] I> Task: Verify boot mode [0005.150] I> Task: Alias fuses [0005.154] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0005.161] I> Task: Print SKU type [0005.164] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x0000000f [0005.170] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0005.174] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0005.178] I> FUSE_OPT_DLA_DISABLE = 0x00000003 [0005.182] I> FUSE_OPT_PVA_DISABLE = 0x00000001 [0005.187] I> FUSE_OPT_NVENC_DISABLE = 0x00000001 [0005.191] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0005.196] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0005.200] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0005.204] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0005.208] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0005.212] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0005.217] I> FUSE_SKU_INFO_0 = 0xd5 [0005.220] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0005.224] I> FUSE_PACKAGE_INFO_0 = 0x2 [0005.228] I> SKU: Prod [0005.230] I> Task: Boost clocks [0005.233] I> Initializing NAFLL for BPMP_CPU_NIC. [0005.238] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0005.243] I> BPMP NAFLL lock success. [0005.247] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0005.251] I> Initializing PLLC2 for AXI_CBB. [0005.256] I> AXI_CBB : src = 35, divisor = 0 [0005.260] I> Task: Voltage monitor [0005.263] I> VMON: Vmon re-calibration and fine tuning done [0005.269] I> Task: UPHY init [0005.272] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0005.277] I> Task: Boot device init [0005.281] I> Boot_device: RCM [0005.284] I> USB configuration success [0005.287] I> Task: TSC init [0005.290] I> Task: Enable WDT 5th expiry [0005.294] I> Task: I2C register [0005.297] I> Task: Set I2C bus freq [0005.300] I> Task: Reset FSI [0005.303] I> Task: Enable clock-mon [0005.307] I> FMON: Fmon re-programming done [0005.311] I> Task: Mapper init [0005.314] I> Task: MB1 fixed firewalls [0005.320] W> Firewall readback mismatch [0005.326] I> Task: Load MB2/Applet/FSKP [0005.329] I> Loading MB2 Applet [0005.332] I> Slot: 0 [0005.334] I> Binary[21] block-352321536 (partition size: 0x50000) [0005.340] I> Binary name: MB2-Applet [0005.344] I> Size of crypto header is 8192 [0005.348] I> Size of crypto header is 8192 [0005.352] I> BCH of MB2-Applet read from storage [0005.357] I> BCH address is : 0x4004e000 [0005.360] I> MB2-Applet header integrity check is success [0005.366] I> Binary magic in BCH component 0 is MB2A [0005.370] I> component binary type is 21 [0005.374] I> Size of crypto header is 8192 [0005.397] I> MB2-Applet binary is read from storage [0005.402] I> MB2-Applet binary integrity check is success [0005.408] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x42440) [0005.414] I> Task: Prepare MB2 params [0005.418] I> Task: Misc NV security settings [0005.422] I> NVDEC sticky bits programming done [0005.427] I> Successfully powergated NVDEC [0005.431] I> Task: Disable/Reload WDT [0005.434] I> Task: Program misc carveouts [0005.438] I> Task: Disable SCPM/POD reset [0005.442] I> SLCG Global override status := 0x0 [0005.447] I> MB1: MSS reconfig completed [0005.450] W> Firewall readback mismatch [0005.454] W> Firewall readback mismatch [0005.458] W> Firewall readback mismatch [0005.461] W> Firewall readback mismatch [0005.465] W> Firewall readback mismatch [0005.469] W> Firewall readback mismatch [0005.472] W> Firewall readback mismatch [0005.476] W> Firewall readback mismatch [0005.480] W> Firewall readback mismatch [0005.484] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-b648c465) I> t234-A01-1-Silicon (0x12347) Prod I> Emulation: I> Entry timestamp: 0x00000000 I> Task: Pinmux init I> Task: Crypto init I> Task: Boot device init I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: SDMMC_BOOT instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 0-3 I> Secondary storage device: SDMMC_USER instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 1-3 I> Secondary storage device: QSPI_FLASH instance: 0 I> Task: I2C register I> Task: Register exit handlers I> Task: Enter 3p server I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000021 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> strt_pg_num(0) num_of_pgs(16) read_buf(0x40071738) I> BRBCT integrity check is success I> Validation passed for 1 copy of BRBCT @ 0 I> Rebooting : reboot-recovery �� [0021.927] I> MB1 (version: 1.4.0.1-t234-54845784-08e631ca) [0021.932] I> t234-A01-1-Silicon (0x12347) Prod [0021.937] I> Boot-mode : BPMP Diagnostic [0021.940] I> Entry timestamp: 0x00000000 [0021.944] I> last_boot_error: 0x0 [0021.947] I> BR-BCT: preprod_dev_sign: 0 [0021.951] I> rst_source: 0xb, rst_level: 0x1 [0021.955] I> Task: Initialize MB2 params [0021.959] I> MB2-params @ 0x40060000 [0021.963] I> Task: Crypto init [0021.966] I> Task: Perform MB1 KAT tests [0021.970] I> Task: NVRNG health check [0021.973] I> NVRNG: Health check success [0021.977] I> Task: Secure debug controls [0021.981] I> Task: strap war set [0021.984] I> Task: Program NV master stream id [0021.988] I> Task: Verify boot mode [0021.994] I> Task: Alias fuses [0021.997] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0022.004] I> Task: Print SKU type [0022.007] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x0000000f [0022.013] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0022.017] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0022.021] I> FUSE_OPT_DLA_DISABLE = 0x00000003 [0022.025] I> FUSE_OPT_PVA_DISABLE = 0x00000001 [0022.030] I> FUSE_OPT_NVENC_DISABLE = 0x00000001 [0022.034] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0022.039] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0022.043] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0022.047] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0022.051] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0022.056] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0022.060] I> FUSE_SKU_INFO_0 = 0xd5 [0022.063] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0022.067] I> FUSE_PACKAGE_INFO_0 = 0x2 [0022.071] I> SKU: Prod [0022.073] I> Task: Boost clocks [0022.076] I> Initializing NAFLL for BPMP_CPU_NIC. [0022.081] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0022.086] I> BPMP NAFLL lock success. [0022.090] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0022.094] I> Initializing PLLC2 for AXI_CBB. [0022.099] I> AXI_CBB : src = 35, divisor = 0 [0022.103] I> Task: Voltage monitor [0022.106] I> VMON: Vmon re-calibration and fine tuning done [0022.112] I> Task: UPHY init [0022.115] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0022.121] I> Task: Boot device init [0022.124] I> Boot_device: RCM [0022.127] I> USB configuration success [0022.131] I> Task: TSC init [0022.133] I> Task: Enable WDT 5th expiry [0022.137] I> Task: I2C register [0022.140] I> Task: Set I2C bus freq [0022.144] I> Task: Reset FSI [0022.146] I> Task: Enable clock-mon [0022.150] I> FMON: Fmon re-programming done [0022.154] I> Task: Mapper init [0022.157] I> Task: MB1 fixed firewalls [0022.164] W> Firewall readback mismatch [0022.169] I> Task: Load MB2/Applet/FSKP [0022.172] I> Loading MB2 Applet [0022.175] I> Slot: 0 [0022.177] I> Binary[21] block-352321536 (partition size: 0x50000) [0022.183] I> Binary name: MB2-Applet [0022.187] I> Size of crypto header is 8192 [0022.191] I> Size of crypto header is 8192 [0022.195] I> BCH of MB2-Applet read from storage [0022.200] I> BCH address is : 0x4004e000 [0022.204] I> MB2-Applet header integrity check is success [0022.209] I> Binary magic in BCH component 0 is MB2A [0022.214] I> component binary type is 21 [0022.217] I> Size of crypto header is 8192 [0022.239] I> MB2-Applet binary is read from storage [0022.244] I> MB2-Applet binary integrity check is success [0022.249] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x42440) [0022.256] I> Task: Prepare MB2 params [0022.260] I> Task: Misc NV security settings [0022.264] I> NVDEC sticky bits programming done [0022.269] I> Successfully powergated NVDEC [0022.273] I> Task: Disable/Reload WDT [0022.276] I> Task: Program misc carveouts [0022.280] I> Task: Disable SCPM/POD reset [0022.284] I> SLCG Global override status := 0x0 [0022.288] I> MB1: MSS reconfig completed [0022.292] W> Firewall readback mismatch [0022.296] W> Firewall readback mismatch [0022.300] W> Firewall readback mismatch [0022.303] W> Firewall readback mismatch [0022.307] W> Firewall readback mismatch [0022.311] W> Firewall readback mismatch [0022.314] W> Firewall readback mismatch [0022.318] W> Firewall readback mismatch [0022.322] W> Firewall readback mismatch [0022.325] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-b648c465) I> t234-A01-1-Silicon (0x12347) Prod I> Emulation: I> Entry timestamp: 0x00000000 I> Task: Pinmux init I> Task: Crypto init I> Task: Boot device init I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: SDMMC_BOOT instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 0-3 I> Secondary storage device: SDMMC_USER instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 1-3 I> Secondary storage device: QSPI_FLASH instance: 0 I> Task: I2C register I> Task: Register exit handlers I> Task: Enter 3p server I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000021 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> strt_pg_num(0) num_of_pgs(16) read_buf(0x40071738) I> BRBCT integrity check is success I> Validation passed for 1 copy of BRBCT @ 0 I> Rebooting : reboot-recovery �� [0203.643] I> MB1 (version: 1.4.0.1-t234-54845784-08e631ca) [0203.648] I> t234-A01-1-Silicon (0x12347) Prod [0203.653] I> Boot-mode : BPMP Diagnostic [0203.657] I> Entry timestamp: 0x00000000 [0203.660] I> last_boot_error: 0x0 [0203.663] I> BR-BCT: preprod_dev_sign: 0 [0203.667] I> rst_source: 0xb, rst_level: 0x1 [0203.671] I> Task: Initialize MB2 params [0203.676] I> MB2-params @ 0x40060000 [0203.679] I> Task: Crypto init [0203.682] I> Task: Perform MB1 KAT tests [0203.686] I> Task: NVRNG health check [0203.689] I> NVRNG: Health check success [0203.693] I> Task: Secure debug controls [0203.697] I> Task: strap war set [0203.700] I> Task: Program NV master stream id [0203.704] I> Task: Verify boot mode [0203.710] I> Task: Alias fuses [0203.714] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0203.721] I> Task: Print SKU type [0203.724] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x0000000f [0203.729] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0203.733] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0203.738] I> FUSE_OPT_DLA_DISABLE = 0x00000003 [0203.742] I> FUSE_OPT_PVA_DISABLE = 0x00000001 [0203.746] I> FUSE_OPT_NVENC_DISABLE = 0x00000001 [0203.751] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0203.755] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0203.759] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0203.764] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0203.768] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0203.772] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0203.776] I> FUSE_SKU_INFO_0 = 0xd5 [0203.779] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0203.784] I> FUSE_PACKAGE_INFO_0 = 0x2 [0203.787] I> SKU: Prod [0203.789] I> Task: Boost clocks [0203.792] I> Initializing NAFLL for BPMP_CPU_NIC. [0203.797] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0203.803] I> BPMP NAFLL lock success. [0203.806] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0203.811] I> Initializing PLLC2 for AXI_CBB. [0203.815] I> AXI_CBB : src = 35, divisor = 0 [0203.819] I> Task: Voltage monitor [0203.823] I> VMON: Vmon re-calibration and fine tuning done [0203.828] I> Task: UPHY init [0203.831] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0203.836] I> Task: Boot device init [0203.840] I> Boot_device: RCM [0203.843] I> USB configuration success [0203.846] I> Task: TSC init [0203.849] I> Task: Enable WDT 5th expiry [0203.853] I> Task: I2C register [0203.856] I> Task: Set I2C bus freq [0203.859] I> Task: Reset FSI [0203.862] I> Task: Enable clock-mon [0203.866] I> FMON: Fmon re-programming done [0203.870] I> Task: Mapper init [0203.873] I> Task: MB1 fixed firewalls [0203.879] W> Firewall readback mismatch [0203.885] I> Task: Load MB2/Applet/FSKP [0203.888] I> Loading MB2 Applet [0203.891] I> Slot: 0 [0203.893] I> Binary[21] block-352321536 (partition size: 0x50000) [0203.899] I> Binary name: MB2-Applet [0203.903] I> Size of crypto header is 8192 [0203.907] I> Size of crypto header is 8192 [0203.911] I> BCH of MB2-Applet read from storage [0203.916] I> BCH address is : 0x4004e000 [0203.919] I> MB2-Applet header integrity check is success [0203.925] I> Binary magic in BCH component 0 is MB2A [0203.930] I> component binary type is 21 [0203.933] I> Size of crypto header is 8192 [0203.955] I> MB2-Applet binary is read from storage [0203.960] I> MB2-Applet binary integrity check is success [0203.966] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x42440) [0203.972] I> Task: Prepare MB2 params [0203.976] I> Task: Misc NV security settings [0203.980] I> NVDEC sticky bits programming done [0203.985] I> Successfully powergated NVDEC [0203.989] I> Task: Disable/Reload WDT [0203.992] I> Task: Program misc carveouts [0203.996] I> Task: Disable SCPM/POD reset [0204.000] I> SLCG Global override status := 0x0 [0204.005] I> MB1: MSS reconfig completed [0204.008] W> Firewall readback mismatch [0204.012] W> Firewall readback mismatch [0204.016] W> Firewall readback mismatch [0204.019] W> Firewall readback mismatch [0204.023] W> Firewall readback mismatch [0204.027] W> Firewall readback mismatch [0204.031] W> Firewall readback mismatch [0204.034] W> Firewall readback mismatch [0204.038] W> Firewall readback mismatch [0204.042] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-b648c465) I> t234-A01-1-Silicon (0x12347) Prod I> Emulation: I> Entry timestamp: 0x00000000 I> Task: Pinmux init I> Task: Crypto init I> Task: Boot device init I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: SDMMC_BOOT instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 0-3 I> Secondary storage device: SDMMC_USER instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 1-3 I> Secondary storage device: QSPI_FLASH instance: 0 I> Task: I2C register I> Task: Register exit handlers I> Task: Enter 3p server I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000021 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> strt_pg_num(0) num_of_pgs(16) read_buf(0x40071738) I> BRBCT integrity check is success I> Validation passed for 1 copy of BRBCT @ 0 I> Rebooting : reboot-recovery �� [0031.007] I> MB1 (version: 1.4.0.1-t234-54845784-08e631ca) [0031.013] I> t234-A01-1-Silicon (0x12347) Prod [0031.017] I> Boot-mode : Coldboot [0031.020] I> Entry timestamp: 0x00000000 [0031.024] I> last_boot_error: 0x0 [0031.027] I> BR-BCT: preprod_dev_sign: 0 [0031.031] I> rst_source: 0xb, rst_level: 0x1 [0031.035] I> Task: SE error check [0031.038] I> Task: Bootchain select WAR set [0031.042] I> Task: Enable SLCG [0031.045] I> Task: CRC check [0031.048] I> Task: Initialize MB2 params [0031.052] I> MB2-params @ 0x40060000 [0031.056] I> Task: Crypto init [0031.058] I> Task: Perform MB1 KAT tests [0031.062] I> Task: NVRNG health check [0031.066] I> NVRNG: Health check success [0031.070] I> Task: MSS Bandwidth limiter settings for iGPU clients [0031.076] I> Task: Enabling and initialization of Bandwidth limiter [0031.082] I> No request to configure MBWT settings for any PC! [0031.087] I> Task: Secure debug controls [0031.091] I> Task: strap war set [0031.094] I> Task: Initialize SOC Therm [0031.098] I> Task: Program NV master stream id [0031.102] I> Task: Verify boot mode [0031.108] I> Task: Alias fuses [0031.112] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0031.119] I> Task: Print SKU type [0031.122] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x0000000f [0031.127] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0031.131] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0031.136] I> FUSE_OPT_DLA_DISABLE = 0x00000003 [0031.140] I> FUSE_OPT_PVA_DISABLE = 0x00000001 [0031.144] I> FUSE_OPT_NVENC_DISABLE = 0x00000001 [0031.149] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0031.153] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0031.157] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0031.162] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0031.166] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0031.170] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0031.174] I> FUSE_SKU_INFO_0 = 0xd5 [0031.177] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0031.182] I> FUSE_PACKAGE_INFO_0 = 0x2 [0031.185] I> SKU: Prod [0031.187] I> Task: Boost clocks [0031.190] I> Initializing NAFLL for BPMP_CPU_NIC. [0031.195] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0031.201] I> BPMP NAFLL lock success. [0031.204] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0031.209] I> Initializing PLLC2 for AXI_CBB. [0031.213] I> AXI_CBB : src = 35, divisor = 0 [0031.217] I> Task: Voltage monitor [0031.221] I> VMON: Vmon re-calibration and fine tuning done [0031.226] I> Task: UPHY init [0031.231] I> HSIO UPHY init done [0031.234] W> Skipping GBE UPHY config [0031.237] I> Task: Boot device init [0031.241] I> Boot_device: RCM [0031.244] I> USB configuration success [0031.247] I> Task: TSC init [0031.250] I> Task: Load membct [0031.253] I> RAM_CODE 0x4000021 [0031.256] I> Loading MEMBCT [0031.259] I> Slot: 0 [0031.261] I> Binary[0] block-0 (partition size: 0x40000) [0031.266] I> Binary name: MEM-BCT-0 [0031.270] I> Size of crypto header is 8192 [0031.273] I> Size of crypto header is 8192 [0031.278] I> BCH of MEM-BCT-0 read from storage [0031.282] I> BCH address is : 0x40050000 [0031.286] I> MEM-BCT-0 header integrity check is success [0031.291] I> Binary magic in BCH component 0 is MEM0 [0031.296] I> component binary type is 0 [0031.304] I> MEM-BCT-0 binary is read from storage [0031.308] I> MEM-BCT-0 binary integrity check is success [0031.314] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0031.320] I> RAM_CODE 0x4000021 [0031.326] I> RAM_CODE 0x4000021 [0031.330] I> Task: Load Page retirement list [0031.334] I> Task: SDRAM params override [0031.337] I> Task: Save mem-bct info [0031.341] I> Task: Carveout allocate [0031.344] I> Update CCPLEX IST carveout from MB1-BCT [0031.349] I> ECC region[0]: Start:0x0, End:0x0 [0031.353] I> ECC region[1]: Start:0x0, End:0x0 [0031.358] I> ECC region[2]: Start:0x0, End:0x0 [0031.362] I> ECC region[3]: Start:0x0, End:0x0 [0031.366] I> ECC region[4]: Start:0x0, End:0x0 [0031.371] I> Non-ECC region[0]: Start:0x80000000, End:0x280000000 [0031.377] I> Non-ECC region[1]: Start:0x0, End:0x0 [0031.381] I> Non-ECC region[2]: Start:0x0, End:0x0 [0031.386] I> Non-ECC region[3]: Start:0x0, End:0x0 [0031.390] I> Non-ECC region[4]: Start:0x0, End:0x0 [0031.401] I> allocated(CO:43) base:0xbe000000 size:0x4000000 align: 0x200000 [0031.408] I> allocated(CO:39) base:0x27de00000 size:0x2200000 align: 0x10000 [0031.415] I> allocated(CO:20) base:0x27a000000 size:0x2000000 align: 0x2000000 [0031.422] I> allocated(CO:24) base:0x278000000 size:0x2000000 align: 0x2000000 [0031.429] I> allocated(CO:28) base:0x276000000 size:0x2000000 align: 0x2000000 [0031.436] I> allocated(CO:22) base:0x27c000000 size:0x1000000 align: 0x1000000 [0031.443] I> allocated(CO:35) base:0x275000000 size:0x1000000 align: 0x100000 [0031.451] I> allocated(CO:02) base:0x27d000000 size:0x800000 align: 0x800000 [0031.457] I> allocated(CO:03) base:0x274800000 size:0x800000 align: 0x800000 [0031.464] I> allocated(CO:06) base:0x274000000 size:0x800000 align: 0x800000 [0031.471] I> allocated(CO:56) base:0x273800000 size:0x800000 align: 0x200000 [0031.478] I> allocated(CO:07) base:0x27d800000 size:0x400000 align: 0x400000 [0031.485] I> allocated(CO:33) base:0x273400000 size:0x400000 align: 0x200000 [0031.492] I> allocated(CO:19) base:0x273180000 size:0x280000 align: 0x10000 [0031.499] I> allocated(CO:23) base:0x27dc00000 size:0x200000 align: 0x200000 [0031.506] I> allocated(CO:01) base:0x273000000 size:0x100000 align: 0x100000 [0031.513] I> allocated(CO:05) base:0x272f00000 size:0x100000 align: 0x100000 [0031.520] I> allocated(CO:08) base:0x272e00000 size:0x100000 align: 0x100000 [0031.527] I> allocated(CO:09) base:0x272d00000 size:0x100000 align: 0x100000 [0031.534] I> allocated(CO:12) base:0x272c00000 size:0x100000 align: 0x100000 [0031.541] I> allocated(CO:15) base:0x272b00000 size:0x100000 align: 0x100000 [0031.548] I> allocated(CO:17) base:0x272a00000 size:0x100000 align: 0x100000 [0031.555] I> allocated(CO:27) base:0x272900000 size:0x100000 align: 0x100000 [0031.562] I> allocated(CO:42) base:0x272800000 size:0x100000 align: 0x100000 [0031.568] I> allocated(CO:54) base:0x273100000 size:0x80000 align: 0x80000 [0031.575] I> allocated(CO:34) base:0x2727f0000 size:0x10000 align: 0x10000 [0031.582] I> allocated(CO:72) base:0x2725f0000 size:0x200000 align: 0x10000 [0031.589] I> allocated(CO:46) base:0x240000000 size:0x20000000 align: 0x20000000 [0031.596] I> allocated(CO:47) base:0x272000000 size:0x400000 align: 0x200000 [0031.603] I> allocated(CO:50) base:0x271e00000 size:0x200000 align: 0x100000 [0031.610] I> allocated(CO:48) base:0x2725d0000 size:0x20000 align: 0x10000 [0031.617] I> allocated(CO:69) base:0x2725b0000 size:0x20000 align: 0x10000 [0031.624] I> allocated(CO:49) base:0x2725a0000 size:0x10000 align: 0x10000 [0031.630] I> NSDRAM base: 0x80000000, end: 0x2725f0000, size: 0x1f25f0000 [0031.637] I> Task: Thermal check [0031.640] I> max_chip_limit = 105 [0031.643] I> min_chip_limit = -28 [0031.646] I> max temp read = 50 [0031.649] I> min temp read = 49 [0031.652] I> Task: Update FSI SCR with thermal fuse data [0031.658] I> Task: Enable WDT 5th expiry [0031.661] I> Task: I2C register [0031.664] I> Task: Set I2C bus freq [0031.668] I> Task: Reset FSI [0031.670] I> Task: Pinmux init [0031.674] I> skipped mmio_addr = 0x9240008 [0031.678] I> skipped mmio_addr = 0x9240000 [0031.681] I> skipped mmio_addr = 0x9240010 [0031.685] I> skipped mmio_addr = 0x9240018 [0031.689] I> skipped mmio_addr = 0x9240020 [0031.693] I> skipped mmio_addr = 0x9240030 [0031.697] I> skipped mmio_addr = 0x9240028 [0031.701] I> skipped mmio_addr = 0x9240038 [0031.705] I> skipped mmio_addr = 0x9240040 [0031.709] I> skipped mmio_addr = 0x9240048 [0031.713] I> skipped mmio_addr = 0x9241000 [0031.717] I> skipped mmio_addr = 0x9241008 [0031.721] I> skipped mmio_addr = 0x9241010 [0031.725] I> skipped mmio_addr = 0x9241018 [0031.729] I> skipped mmio_addr = 0x9241020 [0031.733] I> skipped mmio_addr = 0x9241028 [0031.737] I> skipped mmio_addr = 0x9241030 [0031.741] I> skipped mmio_addr = 0x9241038 [0031.745] I> skipped mmio_addr = 0x9241040 [0031.749] I> skipped mmio_addr = 0x9242000 [0031.752] I> skipped mmio_addr = 0x9242008 [0031.756] I> Task: Prod config init [0031.760] I> Task: Pad voltage init [0031.763] I> Task: Prod init [0031.766] I> Task: Program rst req config reg [0031.770] I> Task: Common rail init [0031.774] I> DONE: Thermal config [0031.777] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0031.785] I> DONE: SOC rail config [0031.789] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0031.795] I> DONE: MEMIO rail config [0031.799] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT. [0031.805] I> DONE: GPU rail info [0031.809] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT. [0031.815] I> DONE: CV rail info [0031.818] I> Task: Mem clock src [0031.821] I> Task: Misc. board config [0031.825] I> PMIC_CONFIG: Platform config not found in MB1 BCT. [0031.831] I> Task: SDRAM init [0031.834] I> MemoryType: 4 MemBctRevision: 1 [0031.840] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0031.848] I> MSS CAR: Init PLLM [0031.851] I> MSS CAR: Init PLLHUB [0031.855] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0031.867] I> SDRAM initialized! [0031.870] I> SDRAM Size in Total 0x200000000 [0031.874] I> Task: Dram Ecc scrub [0031.877] I> Task: DRAM alias check [0031.884] I> Task: Program NSDRAM carveout [0031.888] I> NSDRAM carveout encryption is enabled [0031.892] I> Program NSDRAM carveout [0031.896] I> Task: Register checker [0031.899] I> Task: Enable clock-mon [0031.903] I> FMON: Fmon re-programming done [0031.907] I> Task: Mapper init [0031.910] I> Task: SC7 Context Init [0031.914] W> SC7_CONTEXT_SAVE: SC7 ctx save is not supported. [0031.919] I> Task: CCPLEX IST init [0031.922] I> Task: CPU WP0 [0031.925] I> Loading MCE [0031.927] I> Slot: 0 [0031.929] I> Binary[8] block-134217728 (partition size: 0x80000) [0031.935] I> Binary name: MCE [0031.938] I> Size of crypto header is 8192 [0031.942] I> Size of crypto header is 8192 [0037.236] I> BCH of MCE read from storage [0037.240] I> BCH address is : 0x4003e000 [0037.244] I> MCE header integrity check is success [0037.249] I> Binary magic in BCH component 0 is MTSM [0037.253] I> component binary type is 8 [0037.257] I> Size of crypto header is 8192 [0037.264] I> MCE binary is read from storage [0037.269] I> MCE binary integrity check is success [0037.273] I> Binary MCE loaded successfully at 0x40000000 (0x2baf0) [0037.280] I> Size of crypto header is 8192 [0037.283] I> Sending WP0 mailbox command to PSC [0037.293] I> Task: XUSB Powergate [0037.296] I> Skipping powergate XUSB. [0037.299] I> Task: MB1 fixed firewalls [0037.306] W> Firewall readback mismatch [0037.311] I> Task: Load bpmp-fw [0037.314] I> Slot: 0 [0037.316] I> Binary[15] block-251658240 (partition size: 0x180000) [0037.322] I> Binary name: BPMP_FW [0037.325] I> Size of crypto header is 8192 [0037.329] I> Size of crypto header is 8192 [0037.333] I> BCH of BPMP_FW read from storage [0037.337] I> BCH address is : 0x807fe000 [0037.341] I> BPMP_FW header integrity check is success [0037.346] I> Binary magic in BCH component 0 is BPMF [0037.351] I> component binary type is 15 [0037.354] I> Size of crypto header is 8192 [0037.376] I> BPMP_FW binary is read from storage [0037.382] I> BPMP_FW binary integrity check is success [0037.387] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfc080) [0037.394] I> Slot: 0 [0037.396] I> Binary[16] block-268435456 (partition size: 0x400000) [0037.402] I> Binary name: BPMP_FW_DTB [0037.405] I> Size of crypto header is 8192 [0037.409] I> Size of crypto header is 8192 [0037.413] I> BCH of BPMP_FW_DTB read from storage [0037.418] I> BCH address is : 0x807fc000 [0037.422] I> BPMP_FW_DTB header integrity check is success [0037.427] I> Binary magic in BCH component 0 is BPMD [0037.432] I> component binary type is 16 [0037.436] I> Size of crypto header is 8192 [0037.443] I> BPMP_FW_DTB binary is read from storage [0037.448] I> BPMP_FW_DTB binary integrity check is success [0037.453] I> Binary BPMP_FW_DTB loaded successfully at 0x807cc070 (0x2ff80) [0037.460] I> Task: BPMP fw ast config [0037.464] I> Task: Load psc-fw [0037.467] I> Slot: 0 [0037.469] I> Binary[17] block-285212672 (partition size: 0xc0000) [0037.475] I> Binary name: PSC_FW [0037.478] I> Size of crypto header is 8192 [0037.482] I> Size of crypto header is 8192 [0037.486] I> BCH of PSC_FW read from storage [0037.490] I> BCH address is : 0x80ffe000 [0037.494] I> PSC_FW header integrity check is success [0037.499] I> Binary magic in BCH component 0 is PFWP [0037.503] I> component binary type is 17 [0037.507] I> Size of crypto header is 8192 [0037.516] I> PSC_FW binary is read from storage [0037.521] I> PSC_FW binary integrity check is success [0037.526] I> Binary PSC_FW loaded successfully at 0x80fb4210 (0x49df0) [0037.533] I> Task: Load nvdec-fw [0037.536] I> Slot: 0 [0037.538] I> Binary[7] block-117440512 (partition size: 0x100000) [0037.544] I> Binary name: NVDEC [0037.547] I> Size of crypto header is 8192 [0037.551] I> Size of crypto header is 8192 [0037.555] I> BCH of NVDEC read from storage [0037.559] I> BCH address is : 0x800fe000 [0037.563] I> NVDEC header integrity check is success [0037.567] I> Binary magic in BCH component 0 is NDEC [0037.572] I> component binary type is 7 [0037.576] I> Size of crypto header is 8192 [0037.585] I> NVDEC binary is read from storage [0037.589] I> NVDEC binary integrity check is success [0037.594] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0037.603] I> Task: Load tsec-fw [0037.606] I> TSEC-FW load support not enabled [0037.610] I> Task: GPIO interrupt map [0037.614] I> Task: SC7 context save [0037.618] W> SC7_CONTEXT_SAVE: SC7 ctx save is not supported. [0037.623] I> Task: Load MB2/Applet/FSKP [0037.627] I> Loading MB2 [0037.630] I> Slot: 0 [0037.632] I> Binary[6] block-100663296 (partition size: 0x80000) [0037.637] I> Binary name: MB2 [0037.640] I> Size of crypto header is 8192 [0037.644] I> Size of crypto header is 8192 [0037.648] I> BCH of MB2 read from storage [0037.652] I> BCH address is : 0x8007e000 [0037.656] I> MB2 header integrity check is success [0037.661] I> Binary magic in BCH component 0 is MB2B [0037.665] I> component binary type is 6 [0037.669] I> Size of crypto header is 8192 [0037.680] I> MB2 binary is read from storage [0037.685] I> MB2 binary integrity check is success [0037.690] I> Binary MB2 loaded successfully at 0x80000000 (0x69900) [0037.696] I> Task: Map CCPLEX SHARED carveout [0037.700] I> Task: Prepare MB2 params [0037.704] I> Task: Dram ecc test [0037.707] I> Task: Misc NV security settings [0037.711] I> NVDEC sticky bits programming done [0037.716] I> Successfully powergated NVDEC [0037.720] I> Task: Disable/Reload WDT [0037.723] I> Task: Program misc carveouts [0037.727] I> Program IPC carveouts [0037.731] I> Task: Disable SCPM/POD reset [0037.734] I> SLCG Global override status := 0x0 [0037.739] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-c6a05a9f) I> t234-A01-1-Silicon (0x12347) I> Boot-mode : RCM BOOT I> Emulation: I> Entry timestamp: 0x024048a7 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x273800000, size:0x800000] I> Task: SE error check I> Task: Crypto init I> Task: MB2 Params integrity check I> Task: ARI update carveout TZDRAM I> Task: Configure OEM set LA/PTSA values I> Task: Check MC errors I> Task: Enable hot-plug capability I> Task: Set blob address I> Task: PSC mailbox init I> Task: Enable clock for external modules I> Task: I2C register I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout I> Task: Program CBB PCIE AMAP regions I> Task: Pass DRAM ECC PRL Flag to FSI I> Task: Load and authenticate registered FWs I> Task: Load AUXP FWs I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Successfully register PVA FW load task with MB2 loader I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x272e00000 I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x272a00000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x27a000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 12054896 bytes I> dce: plain binary integrity check is success I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x27a000000 I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x27d800000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x272f00000 I> pva-fw: Authentication Finalize Done I> Binary pva-fw loaded successfully at 0x273180000 I> Task: Check MC errors I> Task: Carveout setup I> Program remaining OEM carveouts I> Task: Enable FSI VMON I> Task: Restore XUSB sec I> Task: Enable FSI SE clock I> Task: Initialize SBSA UART CAR I> Task: Initialize CPUBL Params I> CPUBL-params @ 0x276000000 I> Task: Prepare eeprom data I> Task: Unpowergate APE W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: Memctrl reconfig pending clients I> Task: OEM firewalls I> OEM firewalls configured I> Task: Powergate APE I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings I> Task: Unhalt AUXPs I> Unhalting SPE.. I> Enabling combined UART ����spe: early_init ����vic initialized �⸸��tsc initialized ����aon lic initialized �ุ��spe: tag is 5243985d1b1eb3f06fac6d36bd7e74ac ����spe: SafeRTOS v8.4 �ุ��spe: init ����scheduler initialized �ุ��aon hsp initialized ����tag initialized �ุ��tcu initialized ����bpmp ipc initialized �ุ��spe: late init ����cpu_nic clock initialized �ุ��apb clock initialized ����pm initialized �ุ��bpmp hsp initialized ����top1 hsp initialized �ุ��ccplex ipc initialized ����spe: start scheduler �ุ�� I> Task: Trigger mailbox for PSC-BL1 exit I> Sending opcode 0x4d420802 to psc I> Received ACK from psc I> Task: Start secure NOR provision I> Skip Secure NOR provisioning I> Task: Trigger load FSI keyblob I> Task: Complete load FSI keyblob I> Task: MB2-PSC_FW Key Manager Init I> Sending opcode OP_PSC_KEY_MANAGER to psc-fw I> Sending opcode 0x4b45594d to psc �� ��I> ��hwwdt_init: WDT boot cfg 0x710010 sts 0x10 bpmp: socket 0 bpmp: base binary md5 is ac83764aab09e08198fdb2c012af5bb1 bpmp: combined binary md5 is b86e686660a68c156e5b1b2d9392af5f bpmp: firmware tag is b86e686660a68c156e5b-ac83764aab0 Write control check for CBB_CENTRAL_CBB_FIREWALL_PWM7_BLF failed, expected value: 00100008 != actual value: 0010000a address: 13a178a8 initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early initialized pm 465 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ��Received ACK from psc I> Task: Unhalt FSI I> FSI unhalt skipped I> Task: Unhalt AUXPs I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> ��initialized avfs_clk_platform initialized powergate ��Unhalting DCE I> DCE unhalt successful I> APE unhalt s��initialized dvs ��[ 7.075380] Camera-FW on t234-rce-safe started TCU early console enabled. ��initialized clk_mach_config suspend progress: 0x0 initialized suspend initialized strap initialized mce_dbell ��kipped I> Task: Load HV/CPUBL I> Task: Load TOS I> Task: Trigger load TSEC leyblob I> Sending opcode 0x5353545��initialized emc initialized emc_mrq ��2 to psc I> Sent opcode to psc��initialized clk_cal initialized uphy_dt initialized uphy_mrq HSIO UPHY reset has been de-asserted 0x0 initialized uphy initialized pg_late initialized pg_mrq_init swdtimer_init: reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post �� I> Task: Load and authenticate��initialized clk_cal_late initialized noc_late initialized cvc �� registered FWs �� ��initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/2 have not matching zones 0/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zones 0/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/0 have not matching zones 1/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zones 1/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zones 2/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zones 2/1 initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable pwm3 enable sdmmc4_axicif enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable usb2_trk enable xusb_ss_dev enable xusb_fs_dev enable xusb_falcon enable dsi_lp enable xusb_core_mux enable xusb_core_dev clk_check_max_rate: pex1_c6_core rate 500000000 > max 250000000 clk_check_max_rate: pex2_c7_core rate 500000000 > max 250000000 clk_check_max_rate: pex2_c8_core rate 500000000 > max 250000000 clk_check_max_rate: pex2_c9_core rate 500000000 > max 250000000 clk_check_max_rate: pex2_c10_core rate 500000000 > max 250000000 clk_check_max_rate: pex0_c0_core rate 500000000 > max 250000000 clk_check_max_rate: pex0_c1_core rate 500000000 > max 250000000 ��[ 7.328809] Camer��clk_check_max_rate: pex0_c2_core rate 500000000 > max 250000000 clk_check_max_rate: pex0_c3_core rate 500000000 > max 250000000 clk_check_max_rate: pex0_c4_��a-FW on t234-rce-safe ready SHA1=e2238c99 (crt 12.421 ms, total boot 266.921 m��core rate 500000000 > max 250000000 clk_check_max_rate: pex1_c5_core rate 500��s) ��000000 > max 250000000 initialized clk_mach_post initialized pg_post initialized regulator_post initialized profile initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete ��I> MB2-params @ 0x40060000 I> NSDRAM carveout base: 0x80000000, size: 0x1f2�� DCE_R5_Init MPU enabled DCE_SW_Init Admin Task Init Admin Task Init compl��5f0000 I> cpubl_params: nsdram: carveout: 1, encryption: 1 ��ete Print Task Init RM Task Init SHA Task Init Admin Task Started DCE SC7 SHA Enabled RM ��I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0x272000000 ��Task Started RM Task Running Print Task Started Print Task Running SHA Task Started SHA Task Running DCE: FW Boot Complete Admin Task Running ��I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0xc1dc03f0 I> Relocating OP-TEE dtb from: 0xc1eff4e0 to 0xbe040020, size: 0x2837 I> [0] START: 0x80000000, SIZE: 0x1f25f0000 I> [1] START: 0x276000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0xbe020000 I> EKB detected (length: 0x410) @ VA:0xbe020000 I> Task: Add cpubl params integrity check I> Added cpubl params digest. I> Task: Prepare TOS params I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0xbe040020 I> NVRNG: Health check success I> NVRNG: Health check success I> Task: Disable MSS perf stats I> Task: Program display sticky bits I> Task: SMMU external bypass disable I> Task: SMMU init I> Task: Program GICv3 registers I> Task: Audit firewall settings I> Task: Clear dec source key I> MB2 finished ��NOTICE: BL31: v2.8(release):8a7f432be NOTICE: BL31: Built : 10:30:22, Nov 30 2023 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.22 (gcc version 11.3.0 (Buildroot 2022.08)) #2 Thu Nov 30 18:39:35 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Test OEM keys are being used. This is insecure for shipping products! I/TC: Primary CPU switching to normal world boot �� Jetson UEFI firmware (version 36.2.0-gcid-34956989 built on 2023-11-30T18:35:35+00:00) ��E/TC:?? 00 get_rpc_alloc_res:645 RPC allocation failed. Non-secure world result: ret=0xffff0000 ret_origin=0 E/LD: init_elf:486 sys_open_ta_bin(bc50d971-d4c9-42c4-82cb-343fb7f37896) E/TC:?? 00 ldelf_init_with_ldelf:131 ldelf failed with res: 0xffff000c �� ��[ 9.357797] Camera-FW on t234-rce-safe ready SHA1=e2238c99 (crt 1.404 ms, total boot 95.103 ms) �� Jetson System firmware version 36.2.0-gcid-34956989 date 2023-11-30T18:35:35+00: 00 ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ......EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services... ��debugfs initialized ��I/TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled ��[ 0.000000] Booting Linux on physical CPU 0x0000010200 [0x410fd421] [ 0.000000] Linux version 5.15.122-tegra (buildbrain@mobile-u64-6517-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2022.08) 11.3.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Thu Nov 30 ) [ 0.000000] Machine model: NVIDIA Jetson Orin Nano Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: SMBIOS=0xffff0000 SMBIOS 3.0=0x23b660000 MEMATTR=0x2359d0018 RNG=0x228160018 MEMRESERVE=0x229d3af18 [ 0.000000] random: crng init done [ 0.000000] secureboot: Secure boot disabled [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000261000000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x0000000277ffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x27131c800-0x27131efff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000277ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bdffffff] [ 0.000000] node 0: [mem 0x00000000c2000000-0x00000000fdfdffff] [ 0.000000] node 0: [mem 0x00000000fdfe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022c67afff] [ 0.000000] node 0: [mem 0x000000022c67b000-0x000000022c85bfff] [ 0.000000] node 0: [mem 0x000000022c85c000-0x0000000239d3ffff] [ 0.000000] node 0: [mem 0x0000000239d40000-0x000000023bc7ffff] [ 0.000000] node 0: [mem 0x000000023bc80000-0x0000000271dfffff] [ 0.000000] node 0: [mem 0x0000000271e00000-0x0000000271ffffff] [ 0.000000] node 0: [mem 0x0000000272000000-0x000000027259ffff] [ 0.000000] node 0: [mem 0x0000000276000000-0x0000000277ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000277ffffff] [ 0.000000] On node 0, zone DMA: 16384 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 14944 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 29 pages/cpu s80344 r8192 d30248 u118784 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Address authentication (architected algorithm) [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Hardware dirty bit management [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolat /l (Kib/PTImod) ules/5[ 0.122-tegr0] a/ealtrivernati/nethevesrneatct/rhintek/r8168ern.kocode [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2000800 [ 0.000000] Policy zone:enable_remote_accessrma [ 0.00enable re000mote access0] Kernel command line: root=/dev/initrd rw rinsmod /lib/modules/5.15.122-tegra/kernel/drivers/phy/tegra/phy-tegra194-p2it_o log level=4 console=ttyTCU0,115200 firmware_class.path=/etc/firminsmod /lib/modules/5.15.122-tn=ma/kernel/drivers/pci/controller/dwc/pcie-tegra194.ko bl of_dataptr=2031616@0x271E10000 bl_prof_ro_ptr=65536@0x271E00000 [ 0.000000] Unknown kernel command line parameters "bl_prof_dataptr=2031616@0x271E10000 bl_prof_ro_ptr=65536@0x271E00000", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000f9fe0000-0x00000000fdfe0000] (64MB) [ 0.000000] Memory: 7472328K/8132224K available (19712K kernel code, 4056K rwdata, 9960K rodata, 7680K init, 528K bss, 397752K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 10200 region 0:0x000000000f500000 [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000001] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000362] Console: colour dummy device 80x25 [ 0.000424] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000432] pid_max: default: 32768 minimum: 301 [ 0.000468] LSM: Security Framework initializing [ 0.000492] Yama: becoming mindful. [ 0.000509] SELinux: Initializing. [ 0.000588] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000602] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001690] rcu: Hierarchical SRCU implementation. [ 0.003770] Tegra Revision: A01 SKU: 213 CPU Process: 0 SoC Process: 0 [ 0.004089] Remapping and enabling EFI services. [ 0.004897] smp: Bringing up secondary CPUs ... [ 0.005384] Detected PIPT I-cache on CPU1 [ 0.005431] GICv3: CPU1: found redistributor 10300 region 0:0x000000000f520000 [ 0.005455] CPU1: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.007960] Detected PIPT I-cache on CPU2 [ 0.007992] GICv3: CPU2: found redistributor 20000 region 0:0x000000000f540000 [ 0.008021] CPU2: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.008530] Detected PIPT I-cache on CPU3 [ 0.008544] GICv3: CPU3: found redistributor 20100 region 0:0x000000000f560000 [ 0.008559] CPU3: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.009021] Detected PIPT I-cache on CPU4 [ 0.009035] GICv3: CPU4: found redistributor 20200 region 0:0x000000000f580000 [ 0.009050] CPU4: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.009508] Detected PIPT I-cache on CPU5 [ 0.009523] GICv3: CPU5: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.009538] CPU5: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.009595] smp: Brought up 1 node, 6 CPUs [ 0.009600] SMP: Total of 6 processors activated. [ 0.009604] CPU features: detected: 32-bit EL0 Support [ 0.009606] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.009608] CPU features: detected: Common not Private translations [ 0.009610] CPU features: detected: CRC32 instructions [ 0.009612] CPU features: detected: Data cache clean to Point of Persistence [ 0.009613] CPU features: detected: Generic authentication (architected algorithm) [ 0.009615] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.009616] CPU features: detected: LSE atomic instructions [ 0.009617] CPU features: detected: Privileged Access Never [ 0.009618] CPU features: detected: RAS Extension Support [ 0.009621] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.046319] CPU: All CPU(s) started at EL2 [ 0.049600] devtmpfs: initialized [ 0.068441] KASLR enabled [ 0.068614] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.068638] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.073652] pinctrl core: initialized pinctrl subsystem [ 0.074734] SMBIOS 3.6.0 present. [ 0.074748] DMI: Unknown NVIDIA Jetson Orin Nano Developer Kit/NVIDIA Jetson Orin Nano Developer Kit, BIOS 36.2.0-gcid-34956989 11/30/2023 [ 0.075311] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.077068] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.077214] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.077303] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.077353] audit: initializing netlink subsys (disabled) [ 0.077471] audit: type=2000 audit(0.076:1): state=initialized audit_enabled=0 res=1 [ 0.079044] thermal_sys: Registered thermal governor 'step_wise' [ 0.079051] thermal_sys: Registered thermal governor 'user_space' [ 0.079055] thermal_sys: Registered thermal governor 'power_allocator' [ 0.082586] cpuidle: using governor menu [ 0.082779] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.082882] ASID allocator initialised with 32768 entries [ 0.084794] Serial: AMBA PL011 UART driver [ 0.085963] printk: console [ramoops-1] enabled [ 0.085969] pstore: Registered ramoops as persistent store backend [ 0.085972] ramoops: using 0x200000@0x2725f0000, ecc: 0 [ 0.095368] tegra-mc 2c00000.memory-controller: unknown: write @0x00000000500604c0: Security violation (TrustZone violation) [ 0.096200] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 116, base_baud = 0) is a SBSA [ 0.108539] platform bpmp: Fixing up cyclic dependency with 2c60000.external-memory-controller [ 0.118391] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.118398] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.118402] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.118406] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.119407] cryptd: max_cpu_qlen set to 1000 [ 0.121153] ACPI: Interpreter disabled. [ 0.122536] VDD_1V8_AO: supplied by VDD_5V0_SYS [ 0.122709] VDD_3V3_AO: supplied by VDD_5V0_SYS [ 0.123083] VDD_AV10_HUB: supplied by VDD_5V0_SYS [ 0.123480] iommu: Default domain type: Translated [ 0.123487] iommu: DMA domain TLB invalidation policy: strict mode [ 0.123787] SCSI subsystem initialized [ 0.123982] vgaarb: loaded [ 0.124167] usbcore: registered new interface driver usbfs [ 0.124193] usbcore: registered new interface driver hub [ 0.124217] usbcore: registered new device driver usb [ 0.124697] pps_core: LinuxPPS API ver. 1 registered [ 0.124702] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.124713] PTP clock support registered [ 0.124807] EDAC MC: Ver: 3.0.0 [ 0.125844] Registered efivars operations [ 0.126481] FPGA manager framework [ 0.126604] Advanced Linux Sound Architecture Driver Initialized. [ 0.127430] clocksource: Switched to clocksource arch_sys_counter [ 0.162747] VFS: Disk quotas dquot_6.6.0 [ 0.162821] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.163024] pnp: PnP ACPI: disabled [ 0.166733] NET: Registered PF_INET protocol family [ 0.167053] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.168710] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.168732] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.168743] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.168832] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.170176] TCP: Hash tables configured (established 65536 bind 65536) [ 0.170334] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.170368] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.170546] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.170963] RPC: Registered named UNIX socket transport module. [ 0.170968] RPC: Registered udp transport module. [ 0.170969] RPC: Registered tcp transport module. [ 0.170972] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.170985] PCI: CLS 0 bytes, default 64 [ 0.171270] Unpacking initramfs... [ 0.180463] hw perfevents: enabled with armv8_cortex_a78 PMU driver, 7 counters available [ 0.180742] kvm [1]: IPA Size Limit: 48 bits [ 0.180785] kvm [1]: GICv3: no GICV resource entry [ 0.180793] kvm [1]: disabling GICv2 emulation [ 0.180811] kvm [1]: GIC system register CPU interface enabled [ 0.180901] kvm [1]: vgic interrupt IRQ9 [ 0.181074] kvm [1]: VHE mode initialized successfully [ 0.184163] Initialise system trusted keyrings [ 0.184330] workingset: timestamp_bits=42 max_order=21 bucket_order=0 [ 0.188646] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.189083] NFS: Registering the id_resolver key type [ 0.189109] Key type id_resolver registered [ 0.189114] Key type id_legacy registered [ 0.189178] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.189193] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.189218] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.189400] 9p: Installing v9fs 9p2000 file system support [ 0.204328] NET: Registered PF_ALG protocol family [ 0.204347] Key type asymmetric registered [ 0.204352] Asymmetric key parser 'x509' registered [ 0.204418] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.204426] io scheduler mq-deadline registered [ 0.204435] io scheduler kyber registered [ 0.215444] EINJ: ACPI disabled. [ 0.228827] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.230677] SuperH (H)SCI(F) driver initialized [ 0.231055] msm_serial: driver initialized [ 0.231700] printk: console [ttyTCU0] enabled [ 0.232687] arm-smmu 8000000.iommu: probing hardware configuration... [ 0.232695] arm-smmu 8000000.iommu: SMMUv2 with: [ 0.232701] arm-smmu 8000000.iommu: stage 1 translation [ 0.232705] arm-smmu 8000000.iommu: stage 2 translation [ 0.232709] arm-smmu 8000000.iommu: nested translation [ 0.232715] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 0.232718] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 0.232741] arm-smmu 8000000.iommu: Supported page sizes: 0x61311000 [ 0.232744] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.232747] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.233803] arm-smmu 10000000.iommu: probing hardware configuration... [ 0.233807] arm-smmu 10000000.iommu: SMMUv2 with: [ 0.233809] arm-smmu 10000000.iommu: stage 1 translation [ 0.233809] arm-smmu 10000000.iommu: stage 2 translation [ 0.233810] arm-smmu 10000000.iommu: nested translation [ 0.233813] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 0.233816] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 0.233820] arm-smmu 10000000.iommu: Supported page sizes: 0x61311000 [ 0.233822] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.233823] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.234240] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.234242] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.234245] arm-smmu 12000000.iommu: stage 1 translation [ 0.234246] arm-smmu 12000000.iommu: stage 2 translation [ 0.234247] arm-smmu 12000000.iommu: nested translation [ 0.234251] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 0.234253] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 0.234259] arm-smmu 12000000.iommu: Supported page sizes: 0x61311000 [ 0.234260] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.234262] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.241882] loop: module loaded [ 0.242627] megasas: 07.717.02.00-rc1 [ 0.246794] tun: Universal TUN/TAP device driver, 1.6 [ 0.247460] thunder_xcv, ver 1.0 [ 0.247493] thunder_bgx, ver 1.0 [ 0.247514] nicpf, ver 1.0 [ 0.248417] hclge is initializing [ 0.248442] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.248452] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.248491] e1000: Intel(R) PRO/1000 Network Driver [ 0.248498] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.248531] e1000e: Intel(R) PRO/1000 Network Driver [ 0.248536] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.248561] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.248565] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.248583] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.248590] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.248815] sky2: driver version 1.30 [ 0.249531] VFIO - User Level meta-driver version: 0.3 [ 0.251132] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.251145] ehci-pci: EHCI PCI platform driver [ 0.251176] ehci-platform: EHCI generic platform driver [ 0.251252] ehci-orion: EHCI orion driver [ 0.251327] ehci-exynos: EHCI Exynos driver [ 0.251384] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.251410] ohci-pci: OHCI PCI platform driver [ 0.251459] ohci-platform: OHCI generic platform driver [ 0.251538] ohci-exynos: OHCI Exynos driver [ 0.252025] usbcore: registered new interface driver usb-storage [ 0.253841] rtc-efi rtc-efi.0: registered as rtc0 [ 0.253887] rtc-efi rtc-efi.0: setting system clock to 1970-01-01T00:08:51 UTC (531) [ 0.254352] i2c_dev: i2c /dev entries driver [ 0.257811] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 0.259735] sdhci: Secure Digital Host Controller Interface driver [ 0.259740] sdhci: Copyright(c) Pierre Ossman [ 0.260236] Synopsys Designware Multimedia Card Interface Driver [ 0.260920] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.262106] ledtrig-cpu: registered to indicate activity on CPUs [ 0.263039] SMCCC: SOC_ID: ID = jep106:036b:0234 Revision = 0x00000401 [ 0.263571] tegra-bpmp bpmp: Adding to iommu group 0 [ 0.265088] tegra-bpmp bpmp: firmware: b86e686660a68c156e5b-ac83764aab0 [ 0.627168] Freeing initrd memory: 28400K [ 1.680597] clocksource: tsc: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 1.680629] clocksource: osc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 49772407460 ns [ 1.680632] clocksource: usec: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 1.681328] usbcore: registered new interface driver usbhid [ 1.681334] usbhid: USB HID core driver [ 1.685216] optee: probing for conduit method. [ 1.685279] optee: revision 3.22 (1b7f2993) [ 1.744690] optee: dynamic shared memory is enabled [ 1.744971] optee: initialized driver [ 1.747286] usbcore: registered new interface driver snd-usb-audio [ 1.749049] NET: Registered PF_PACKET protocol family [ 1.749331] 9pnet: Installing 9P2000 support [ 1.749447] Key type dns_resolver registered [ 1.750168] printk: console [ttyTCU0]: printing thread started [ 1.750236] printk: console [ramoops-1]: printing thread started [ 1.750318] Loading compiled-in X.509 certificates [ 1.761083] Loaded X.509 cert 'Build time autogenerated kernel key: 6df01ab60d1edfd9b484fde1a886c193293a8ad8' [ 1.761779] pstore: Using crash dump compression: deflate [ 1.790679] tegra-gpcdma 2600000.dma-controller: Adding to iommu group 1 [ 1.792079] tegra-gpcdma 2600000.dma-controller: GPC DMA driver register 31 channels [ 1.793416] serial-tegra 3100000.serial: RX in PIO mode [ 1.793422] serial-tegra 3100000.serial: TX in PIO mode [ 1.793486] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 112, base_baud = 0) is a TEGRA_UART [ 1.794005] serial-tegra 3140000.serial: RX in PIO mode [ 1.794009] serial-tegra 3140000.serial: TX in PIO mode [ 1.794045] 3140000.serial: ttyTHS2 at MMIO 0x3140000 (irq = 196, base_baud = 0) is a TEGRA_UART [ 1.796040] tegra_rtc c2a0000.rtc: registered as rtc1 [ 1.796049] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.796466] tegra-i2c 3160000.i2c: Adding to iommu group 1 [ 1.799423] tegra-i2c 3180000.i2c: Adding to iommu group 1 [ 1.801084] tegra-i2c 31b0000.i2c: Adding to iommu group 1 [ 1.802474] tegra-i2c c240000.i2c: Adding to iommu group 1 [ 1.803635] i2c 1-0025: Fixing up cyclic dependency with 3520000.padctl [ 1.804243] tegra-i2c c250000.i2c: Adding to iommu group 1 [ 1.825189] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1573000 KHz, changing to: 1510400 KHz [ 1.828166] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 1572000 KHz, changing to: 1510400 KHz [ 1.830440] sdhci-tegra 3400000.mmc: Adding to iommu group 2 [ 1.834773] tegra-xusb 3610000.usb: Adding to iommu group 3 [ 1.835310] sdhci-tegra 3400000.mmc: Got CD GPIO [ 1.851814] tegra-xusb 3610000.usb: Firmware timestamp: 2023-02-10 03:48:10 UTC [ 1.851823] tegra-xusb 3610000.usb: xHCI Host Controller [ 1.851838] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 1 [ 1.852601] tegra-xusb 3610000.usb: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000010810 [ 1.852625] tegra-xusb 3610000.usb: irq 122, io mem 0x03610000 [ 1.852752] tegra-xusb 3610000.usb: xHCI Host Controller [ 1.852756] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 2 [ 1.852761] tegra-xusb 3610000.usb: Host supports USB 3.1 Enhanced SuperSpeed [ 1.855494] hub 1-0:1.0: USB hub found [ 1.855792] hub 1-0:1.0: 4 ports detected [ 1.858212] hub 2-0:1.0: USB hub found [ 1.858237] hub 2-0:1.0: 4 ports detected [ 1.882272] irq: IRQ223: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [ 1.882542] mmc0: SDHCI controller on 3400000.mmc [3400000.mmc] using ADMA 64-bit [ 1.884048] irq: IRQ224: trimming hierarchy from :bus@0:pmc@c360000 [ 1.884108] irq: IRQ225: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [ 1.884153] irq: IRQ226: trimming hierarchy from :bus@0:pmc@c360000 [ 1.884221] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.922252] ALSA device list: [ 1.922257] No soundcards found. [ 1.923762] Freeing unused kernel memory: 7680K [ 1.923845] Run /init as init process [ 1.941748] Root device found: initrd [ 1.956898] r8168: loading out-of-tree module taints kernel. [ 1.959138] Mount initrd as rootfs and enter recovery mode [ 1.993599] tegra194-pcie 140a0000.pcie: Adding to iommu group 4 [ 2.100606] tegra194-pcie 140a0000.pcie: host bridge /bus@0/pcie@140a0000 ranges: [ 2.100633] tegra194-pcie 140a0000.pcie: MEM 0x3240000000..0x3527ffffff -> 0x3240000000 [ 2.100641] tegra194-pcie 140a0000.pcie: MEM 0x3528000000..0x352fffffff -> 0x0040000000 [ 2.100646] tegra194-pcie 140a0000.pcie: IO 0x002a100000..0x002a1fffff -> 0x002a100000 [ 2.101167] tegra194-pcie 140a0000.pcie: iATU unroll: enabled [ 2.101173] tegra194-pcie 140a0000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 2.191611] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.207610] tegra194-pcie 140a0000.pcie: Link up [ 2.210322] tegra194-pcie 140a0000.pcie: Link up [ 2.210406] tegra194-pcie 140a0000.pcie: PCI host bridge to bus 0008:00 [ 2.210411] pci_bus 0008:00: root bus resource [io 0x0000-0xfffff] (bus address [0x2a100000-0x2a1fffff]) [ 2.210416] pci_bus 0008:00: root bus resource [mem 0x3528000000-0x352fffffff] (bus address [0x40000000-0x47ffffff]) [ 2.210419] pci_bus 0008:00: root bus resource [bus 00-ff] [ 2.210422] pci_bus 0008:00: root bus resource [mem 0x3240000000-0x3527ffffff pref] [ 2.210476] pci 0008:00:00.0: [10de:229c] type 01 class 0x060400 [ 2.210636] pci 0008:00:00.0: PME# supported from D0 D3hot [ 2.214367] pci 0008:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.214524] pci 0008:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 2.214527] pci 0008:01:00.0: reg 0x10: [io size 0x0100] [ 2.214709] pci 0008:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.214826] pci 0008:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.215817] pci 0008:01:00.0: supports D1 D2 [ 2.215819] pci 0008:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.230483] pci 0008:00:00.0: BAR 14: assigned [mem 0x3528000000-0x35280fffff] [ 2.230487] pci 0008:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.230491] pci 0008:01:00.0: BAR 4: assigned [mem 0x3528000000-0x3528003fff 64bit] [ 2.230584] pci 0008:01:00.0: BAR 2: assigned [mem 0x3528004000-0x3528004fff 64bit] [ 2.230677] pci 0008:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.230706] pci 0008:00:00.0: PCI bridge to [bus 01-ff] [ 2.230708] pci 0008:00:00.0: bridge window [io 0x1000-0x1fff] [ 2.230712] pci 0008:00:00.0: bridge window [mem 0x3528000000-0x35280fffff] [ 2.230810] pcieport 0008:00:00.0: Adding to iommu group 4 [ 2.230909] pcieport 0008:00:00.0: PME: Signaling with IRQ 188 [ 2.231199] pcieport 0008:00:00.0: AER: enabled with IRQ 188 [ 2.231390] r8168 0008:01:00.0: Adding to iommu group 4 [ 2.231454] r8168 Gigabit Ethernet driver 8.051.02.10m_pll-NAPI loaded [ 2.231511] r8168 0008:01:00.0: enabling device (0000 -> 0003) [ 2.248226] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.250276] r8168 Copyright (C) 2022 Realtek NIC software team [ 2.250276] This program comes with ABSOLUTELY NO WARRANTY; for details, please see . [ 2.250276] This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.250402] tegra194-pcie 14100000.pcie: Adding to iommu group 5 [ 2.253435] tegra194-pcie 14100000.pcie: host bridge /bus@0/pcie@14100000 ranges: [ 2.253461] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 2.253468] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 2.253474] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 2.253970] tegra194-pcie 14100000.pcie: iATU unroll: enabled [ 2.253976] tegra194-pcie 14100000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 2.359607] tegra194-pcie 14100000.pcie: Link up [ 2.362220] tegra194-pcie 14100000.pcie: Link up [ 2.362285] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 2.362289] pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x30100000-0x301fffff]) [ 2.362293] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 2.362296] pci_bus 0001:00: root bus resource [bus 00-ff] [ 2.362298] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 2.362346] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 2.362512] pci 0001:00:00.0: PME# supported from D0 D3hot [ 2.362642] hub 1-2:1.0: USB hub found [ 2.363713] hub 1-2:1.0: 4 ports detected [ 2.365990] pci 0001:01:00.0: [10ec:c822] type 00 class 0x028000 [ 2.366164] pci 0001:01:00.0: reg 0x10: [io 0x100000-0x1000ff] [ 2.366367] pci 0001:01:00.0: reg 0x18: [mem 0x20a8000000-0x20a800ffff 64bit] [ 2.367438] pci 0001:01:00.0: supports D1 D2 [ 2.367440] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.382533] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff] [ 2.382537] pci 0001:00:00.0: BAR 13: assigned [io 0x100000-0x100fff] [ 2.382542] pci 0001:01:00.0: BAR 2: assigned [mem 0x20a8000000-0x20a800ffff 64bit] [ 2.382645] pci 0001:01:00.0: BAR 0: assigned [io 0x100000-0x1000ff] [ 2.382676] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 2.382679] pci 0001:00:00.0: bridge window [io 0x100000-0x100fff] [ 2.382683] pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 2.382777] pcieport 0001:00:00.0: Adding to iommu group 5 [ 2.382867] pcieport 0001:00:00.0: PME: Signaling with IRQ 190 [ 2.383164] pcieport 0001:00:00.0: AER: enabled with IRQ 190 [ 2.383459] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 2.384772] tegra194-pcie 14160000.pcie: host bridge /bus@0/pcie@14160000 ranges: [ 2.384790] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 2.384797] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 2.384801] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 2.385106] tegra194-pcie 14160000.pcie: iATU unroll: enabled [ 2.385109] tegra194-pcie 14160000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 2.476654] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using tegra-xusb [ 2.495421] tegra194-pcie 14160000.pcie: Link up [ 2.496071] tegra194-pcie 14160000.pcie: Link up [ 2.496129] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.496133] pci_bus 0004:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x36100000-0x361fffff]) [ 2.496136] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 2.496139] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.496141] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 2.496183] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 2.496334] pci 0004:00:00.0: PME# supported from D0 D3hot [ 2.499704] pci 0004:01:00.0: [1987:5013] type 00 class 0x010802 [ 2.499899] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.514510] pci 0004:00:00.0: BAR 14: assigned [mem 0x2428000000-0x24280fffff] [ 2.514515] pci 0004:01:00.0: BAR 0: assigned [mem 0x2428000000-0x2428003fff 64bit] [ 2.514602] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.514606] pci 0004:00:00.0: bridge window [mem 0x2428000000-0x24280fffff] [ 2.514692] pcieport 0004:00:00.0: Adding to iommu group 6 [ 2.514778] pcieport 0004:00:00.0: PME: Signaling with IRQ 192 [ 2.515358] pcieport 0004:00:00.0: AER: enabled with IRQ 192 [ 2.515652] tegra194-pcie 141e0000.pcie: Adding to iommu group 7 [ 2.518325] tegra194-pcie 141e0000.pcie: host bridge /bus@0/pcie@141e0000 ranges: [ 2.518350] tegra194-pcie 141e0000.pcie: MEM 0x3000000000..0x3227ffffff -> 0x3000000000 [ 2.518358] tegra194-pcie 141e0000.pcie: MEM 0x3228000000..0x322fffffff -> 0x0040000000 [ 2.518362] tegra194-pcie 141e0000.pcie: IO 0x003e100000..0x003e1fffff -> 0x003e100000 [ 2.518902] tegra194-pcie 141e0000.pcie: iATU unroll: enabled [ 2.518908] tegra194-pcie 141e0000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 2.524922] hub 2-1:1.0: USB hub found [ 2.527082] hub 2-1:1.0: 4 ports detected [ 2.536803] usb usb2-port2: config error [ 2.631609] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 3.625454] tegra194-pcie 141e0000.pcie: Phy link never came up [ 4.627381] tegra194-pcie 141e0000.pcie: Phy link never came up [ 4.627497] tegra194-pcie 141e0000.pcie: PCI host bridge to bus 0007:00 [ 4.627501] pci_bus 0007:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x3e100000-0x3e1fffff]) [ 4.627505] pci_bus 0007:00: root bus resource [mem 0x3228000000-0x322fffffff] (bus address [0x40000000-0x47ffffff]) [ 4.627508] pci_bus 0007:00: root bus resource [bus 00-ff] [ 4.627510] pci_bus 0007:00: root bus resource [mem 0x3000000000-0x3227ffffff pref] [ 4.627554] pci 0007:00:00.0: [10de:229a] type 01 class 0x060400 [ 4.627712] pci 0007:00:00.0: PME# supported from D0 D3hot [ 4.633864] pci 0007:00:00.0: PCI bridge to [bus 01-ff] [ 4.633964] pcieport 0007:00:00.0: Adding to iommu group 7 [ 4.634050] pcieport 0007:00:00.0: PME: Signaling with IRQ 194 [ 4.634349] pcieport 0007:00:00.0: AER: enabled with IRQ 194 [ 4.634623] pci_bus 0007:01: busn_res: [bus 01-ff] is released [ 4.634718] pci 0007:00:00.0: Removing from iommu group 7 [ 4.634730] pci_bus 0007:00: busn_res: [bus 00-ff] is released insmod /lib/modules/5.15.122-tegra/kernel/drivers/nvme/host/nvme-core.ko insmod /lib/modules/5.15.122-tegra/kernel/drivers/nvme/host/nvme.ko [ 4.648662] nvme 0004:01:00.0: Adding to iommu group 6 [ 4.649041] nvme nvme0: pci function 0004:01:00.0 [ 4.649392] nvme 0004:01:00.0: enabling device (0000 -> 0002) [ 4.658529] nvme nvme0: missing or invalid SUBNQN field. [ 4.681452] nvme nvme0: allocated 128 MiB host memory buffer. [ 4.685395] nvme nvme0: 6/0/0 default/read/poll queues [ 4.687428] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 insmod /lib/modules/5.15.122-tegra/kernel/drivers/thermal/tegra/tegra-bpmp-thermal.ko insmod /lib/modules/5.15.122-tegra/kernel/drivers/hwmon/pwm-fan.ko insmod /lib/modules/5.15.122-tegra/kernel/drivers/usb/gadget/libcomposite.ko insmod /lib/modules/5.15.122-tegra/kernel/drivers/usb/typec/typec.ko insmod /lib/modules/5.15.122-tegra/kernel/drivers/usb/typec/ucsi/typec_ucsi.ko insmod /lib/modules/5.15.122-tegra/kernel/drivers/usb/typec/ucsi/ucsi_ccg.ko insmod /lib/modules/5.15.122-tegra/kernel/drivers/usb/gadget/udc/tegra-xudc.ko net 4.735191] tegra-xudc 3550000.usb: Adding to ioinsmod /lib/modules/5.15.122-t groupern 8 /ipv6/ipv6.ko [ 4.754634] NET: Registered PF_INET6 protocol family [ 4.755151] Segment Routing with IPv6 [ 4.755161] In-situ OAM (IOAM) with IPv6 insmod /lib/modules/5.15.122-tegra/extra/drivers/staging/platform/tegra/gte/tegra194_gte.ko insmod /lib/modules/5.15.122-tegra/extra/drivers/nvpps/nvpps.ko [ 4.764531] teginsmod /lib/module: ms/5.15.122-tegra/extra/drivers/net/ethernet/nvidia/nvethernet/nvetd: netnat an r required key missing - tainting kernel insmod /lib/modules/5.15.122-tegra/kernel/drivers/usb/typec/stusb160x.ko insmod /lib/modules/5.15.122-tegra/extra/drivers/platform/tegra/mce/tegra-mce.ko [ 4.803603] tegra-qspi 3270000.spi: Adding to iommu group 9 [ 4.804138] tegra-qspi 3270000.spi: Prod config not found for QSPI: -19 [ 4.805339] spi-nor spi0.0: mx25u51279g (65536 Kbytes) [ 6.607670] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 6.607703] usb usb2-port2: config error [ 10.679667] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 10.679698] usb usb2-port2: config error [ 14.751666] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 14.751697] usb usb2-port2: config error [ 18.823663] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 18.823695] usb usb2-port2: config error [ 22.895666] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 22.895697] usb usb2-port2: config error [ 26.967665] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 26.967697] usb usb2-port2: config error [ 31.039660] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 31.039691] usb usb2-port2: config error [ 35.111661] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 35.111693] usb usb2-port2: config error [ 39.183664] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 39.183695] usb usb2-port2: config error [ 43.255654] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 43.255684] usb usb2-port2: config error [ 47.327661] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 47.327693] usb usb2-port2: config error [ 51.399661] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 51.399693] usb usb2-port2: config error [ 55.471671] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 55.471704] usb usb2-port2: config error [ 59.543487] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 59.543522] usb usb2-port2: config error [ 63.615666] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 63.615697] usb usb2-port2: config error [ 65.905284] using random self ethernet address [ 65.905290] using random host ethernet address [ 65.911934] Mass Storage Function, version: 2009/09/11 [ 65.911941] LUN: removable file: (no medium) [ 65.913371] LUN: removable file: (no medium) [ 65.91454Add6] ev/nvme0n: r1vab le file: (no medium) [ 65.915736] LUN: removable file: (no medium) [ 65.918477] usb0: HOST MAC 5e:d9:49:77:c5:ee [ 65.918482] usb0: MAC 96:c7:66:00:d6:26 [ 65.919744] tegra-xudc 3550000.usb: EP 0 (type: ctrl, dir: out) enabled bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash-5.1# [ 66.982855] tegra-xudc 3550000.usb: EP 5 (type: intr, dir: in) enabled [ 66.982875] tegra-xudc 3550000.usb: EP 3 (type: bulk, dir: in) enabled [ 66.982888] tegra-xudc 3550000.usb: EP 2 (type: bulk, dir: out) enabled [ 66.983004] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 66.983164] tegra-xudc 3550000.usb: EP 7 (type: bulk, dir: in) enabled [ 66.983182] tegra-xudc 3550000.usb: EP 4 (type: bulk, dir: out) enabled [ 67.691626] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 67.691656] usb usb2-port2: config error [ 71.763626] usb usb2-port2: Cannot enable. Maybe the USB cable is bad? [ 300.826628] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 537.568209] nfs: server fc00:1:1:0::1 not responding, still trying [ 537.568336] nfs: server fc00:1:1:0::1 not responding, still trying [ 568.287900] nfs: server fc00:1:1:0::1 not responding, timed out [ 568.287934] nfs: server fc00:1:1:0::1 not responding, timed out [ 568.288097] nfs: server fc00:1:1:0::1 not responding, timed out [ 568.288100] nfs: server fc00:1:1:0::1 not responding, timed out [ 568.288108] nfs: server fc00:1:1:0::1 not responding, timed out [ 568.288111] nfs: server fc00:1:1:0::1 not responding, timed out [ 568.288113] nfs: server fc00:1:1:0::1 not responding, timed out [ 568.288119] nfs: server fc00:1:1:0::1 not responding, timed out [ 568.288121] nfs: server fc00:1:1:0::1 not responding, timed out [ 568.288125] nfs: server fc00:1:1:0::1 not responding, timed out [ 748.511648] rpc_check_timeout: 56 callbacks suppressed [ 748.511654] nfs: server fc00:1:1:0::1 not responding, timed out [ 753.631958] nfs: server fc00:1:1:0::1 not responding, timed out [ 928.735645] nfs: server fc00:1:1:0::1 not responding, timed out [ 933.855742] nfs: server fc00:1:1:0::1 not responding, timed out [ 938.975644] nfs: server fc00:1:1:0::1 not responding, timed out [ 1108.959927] nfs: server fc00:1:1:0::1 not responding, timed out [ 1114.079750] nfs: server fc00:1:1:0::1 not responding, timed out [ 1119.199872] nfs: server fc00:1:1:0::1 not responding, timed out [ 1124.319919] nfs: server fc00:1:1:0::1 not responding, timed out [ 1289.183652] nfs: server fc00:1:1:0::1 not responding, timed out [ 1294.303720] nfs: server fc00:1:1:0::1 not responding, timed out