▒ [0000.066] I> MB1 (version: 1.4.0.4-t234-54845784-e89ea9bc) [0000.071] I> t234-A01-1-Silicon (0x12347) Prod [0000.076] I> Boot-mode : Coldboot [0000.079] I> Entry timestamp: 0x00000000 [0000.083] I> last_boot_error: 0x0 [0000.086] I> BR-BCT: preprod_dev_sign: 0 [0000.090] I> rst_source: 0x0, rst_level: 0x0 [0000.094] I> Task: SE error check [0000.097] I> Task: Bootchain select WAR set [0000.101] I> Task: Enable SLCG [0000.104] I> Task: CRC check [0000.106] I> Task: Initialize MB2 params [0000.111] I> MB2-params @ 0x40060000 [0000.114] I> Task: Crypto init [0000.117] I> Task: Perform MB1 KAT tests [0000.121] I> Task: NVRNG health check [0000.125] I> NVRNG: Health check success [0000.128] I> Task: MSS Bandwidth limiter settings for iGPU clients [0000.134] I> Task: Enabling and initialization of Bandwidth limiter [0000.140] I> No request to configure MBWT settings for any PC! [0000.146] I> Task: Secure debug controls [0000.150] I> Task: strap war set [0000.153] I> Task: Initialize SOC Therm [0000.157] I> Task: Program NV master stream id [0000.161] I> Task: Verify boot mode [0000.167] I> Task: Alias fuses [0000.170] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.177] I> Task: Print SKU type [0000.180] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0000.185] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.190] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0000.194] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.198] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0000.202] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0000.207] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0000.211] I> FUSE_OPT_FSI_DISABLE = 0x00000000 [0000.216] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.220] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.224] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.228] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.232] I> FUSE_SKU_INFO_0 = 0xd0 [0000.236] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.240] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.243] I> SKU: Prod [0000.245] I> Task: Boost clocks [0000.248] I> Initializing NAFLL for BPMP_CPU_NIC. [0000.254] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0000.259] I> BPMP NAFLL lock success. [0000.262] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0000.267] I> Initializing PLLC2 for AXI_CBB. [0000.271] I> AXI_CBB : src = 35, divisor = 0 [0000.275] I> Task: Voltage monitor [0000.279] I> VMON: Vmon re-calibration and fine tuning done [0000.284] I> Task: UPHY init [0000.289] I> HSIO UPHY init done [0000.292] W> Skipping GBE UPHY config [0000.295] I> Task: Boot device init [0000.299] I> Boot_device: QSPI_FLASH instance: 0 [0000.303] I> Qspi clock source : pllc_out0 [0000.308] I> QSPI Flash: Macronix 64MB [0000.311] I> QSPI-0l initialized successfully [0000.315] I> Task: TSC init [0000.318] I> Task: Load membct [0000.321] I> RAM_CODE 0x4000431 [0000.324] I> Loading MEMBCT [0000.327] I> Slot: 0 [0000.329] I> Binary[0] block-3840 (partition size: 0x40000) [0000.334] I> Binary name: MEM-BCT-0 [0000.338] I> Size of crypto header is 8192 [0000.342] I> Size of crypto header is 8192 [0000.346] I> strt_pg_num(3840) num_of_pgs(16) read_buf(0x40050000) [0000.352] I> BCH of MEM-BCT-0 read from storage [0000.356] I> BCH address is : 0x40050000 [0000.360] I> MEM-BCT-0 header integrity check is success [0000.365] I> Binary magic in BCH component 0 is MEM0 [0000.370] I> component binary type is 0 [0000.374] I> strt_pg_num(3856) num_of_pgs(115) read_buf(0x40040000) [0000.381] I> MEM-BCT-0 binary is read from storage [0000.385] I> MEM-BCT-0 binary integrity check is success [0000.391] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.397] I> RAM_CODE 0x4000431 [0000.403] I> RAM_CODE 0x4000431 [0000.407] I> Task: Load Page retirement list [0000.411] I> Task: SDRAM params override [0000.414] I> Task: Save mem-bct info [0000.418] I> Task: Carveout allocate [0000.421] I> RCM blob carveout will not be allocated [0000.426] I> Update CCPLEX IST carveout from MB1-BCT [0000.431] I> ECC region[0]: Start:0x0, End:0x0 [0000.435] I> ECC region[1]: Start:0x0, End:0x0 [0000.439] I> ECC region[2]: Start:0x0, End:0x0 [0000.444] I> ECC region[3]: Start:0x0, End:0x0 [0000.448] I> ECC region[4]: Start:0x0, End:0x0 [0000.452] I> Non-ECC region[0]: Start:0x80000000, End:0x1080000000 [0000.458] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.463] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.468] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.472] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.483] I> allocated(CO:44) base:0x1049800000 size:0x36800000 align: 0x100000 [0000.490] I> allocated(CO:31) base:0x1040000000 size:0x8000000 align: 0x8000000 [0000.497] I> allocated(CO:43) base:0x103c000000 size:0x4000000 align: 0x200000 [0000.504] I> allocated(CO:39) base:0x1039e00000 size:0x2200000 align: 0x10000 [0000.511] I> allocated(CO:20) base:0x1036000000 size:0x2000000 align: 0x2000000 [0000.519] I> allocated(CO:24) base:0x1034000000 size:0x2000000 align: 0x2000000 [0000.526] I> allocated(CO:28) base:0x1032000000 size:0x2000000 align: 0x2000000 [0000.533] I> allocated(CO:29) base:0x1030000000 size:0x2000000 align: 0x2000000 [0000.540] I> allocated(CO:22) base:0x1048000000 size:0x1000000 align: 0x1000000 [0000.548] I> allocated(CO:35) base:0x1038e00000 size:0x1000000 align: 0x100000 [0000.555] I> allocated(CO:41) base:0x102f000000 size:0x1000000 align: 0x100000 [0000.562] I> allocated(CO:02) base:0x1049000000 size:0x800000 align: 0x800000 [0000.569] I> allocated(CO:03) base:0x1038000000 size:0x800000 align: 0x800000 [0000.576] I> allocated(CO:06) base:0x102e800000 size:0x800000 align: 0x800000 [0000.583] I> allocated(CO:56) base:0x102e000000 size:0x800000 align: 0x200000 [0000.590] I> allocated(CO:07) base:0x1038800000 size:0x400000 align: 0x400000 [0000.597] I> allocated(CO:33) base:0x102dc00000 size:0x400000 align: 0x200000 [0000.604] I> allocated(CO:19) base:0x102d980000 size:0x280000 align: 0x10000 [0000.611] I> allocated(CO:23) base:0x1038c00000 size:0x200000 align: 0x200000 [0000.618] I> allocated(CO:01) base:0x102d800000 size:0x100000 align: 0x100000 [0000.625] I> allocated(CO:05) base:0x102d700000 size:0x100000 align: 0x100000 [0000.632] I> allocated(CO:08) base:0x102d600000 size:0x100000 align: 0x100000 [0000.639] I> allocated(CO:09) base:0x102d500000 size:0x100000 align: 0x100000 [0000.646] I> allocated(CO:12) base:0x102d400000 size:0x100000 align: 0x100000 [0000.653] I> allocated(CO:15) base:0x102d300000 size:0x100000 align: 0x100000 [0000.660] I> allocated(CO:17) base:0x102d200000 size:0x100000 align: 0x100000 [0000.667] I> allocated(CO:27) base:0x102d100000 size:0x100000 align: 0x100000 [0000.674] I> allocated(CO:42) base:0x102d000000 size:0x100000 align: 0x100000 [0000.681] I> allocated(CO:54) base:0x102d900000 size:0x80000 align: 0x80000 [0000.688] I> allocated(CO:34) base:0x102cff0000 size:0x10000 align: 0x10000 [0000.695] I> allocated(CO:72) base:0x102cdf0000 size:0x200000 align: 0x10000 [0000.702] I> allocated(CO:47) base:0x102c800000 size:0x400000 align: 0x200000 [0000.709] I> allocated(CO:50) base:0x102c600000 size:0x200000 align: 0x100000 [0000.716] I> allocated(CO:52) base:0x102cdc0000 size:0x30000 align: 0x10000 [0000.723] I> allocated(CO:48) base:0x102cda0000 size:0x20000 align: 0x10000 [0000.730] I> allocated(CO:69) base:0x102cd80000 size:0x20000 align: 0x10000 [0000.737] I> allocated(CO:49) base:0x102cd70000 size:0x10000 align: 0x10000 [0000.743] I> NSDRAM base: 0x80000000, end: 0x102cdf0000, size: 0xfacdf0000 [0000.750] I> Task: Thermal check [0000.753] I> Using min_chip_limit as min_tmon_limit [0000.758] I> Using max_chip_limit as max_tmon_limit [0000.763] I> BCT max_tmon_limit = 105 [0000.766] I> BCT min_tmon_limit = -28 [0000.770] I> BCT max_tmon_limit = 105 [0000.773] I> BCT min_tmon_limit = -28 [0000.777] I> SKU specific max_chip_limit = 105 [0000.781] I> SKU specific min_chip_limit = -28 [0000.785] I> BCT max_chip_limit = 105 [0000.789] I> BCT min_chip_limit = -28 [0000.792] I> enable_soctherm_polling = 0 [0000.796] I> max temp read = 26 [0000.799] I> min temp read = 25 [0000.802] I> Enabling thermtrip [0000.805] I> Task: Update FSI SCR with thermal fuse data [0000.810] I> Task: Enable WDT 5th expiry [0000.814] I> Task: I2C register [0000.817] I> Task: Set I2C bus freq [0000.820] I> Task: Reset FSI [0000.823] I> Task: Pinmux init [0000.826] I> Task: Prod config init [0000.830] I> Task: Pad voltage init [0000.833] I> Task: Prod init [0000.836] I> Task: Program rst req config reg [0000.840] I> Task: Common rail init [0000.844] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.855] I> DONE: Thermal config [0000.860] I> DONE: SOC rail config [0000.863] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.869] I> DONE: MEMIO rail config [0000.873] I> DONE: GPU rail info [0000.877] I> DONE: CV rail info [0000.880] I> Task: Mem clock src [0000.883] I> Task: Misc. board config [0000.887] I> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.893] I> Task: SDRAM init [0000.896] I> MemoryType: 4 MemBctRevision: 8 [0000.902] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 8 [0000.910] I> MSS CAR: Init PLLM [0000.913] I> MSS CAR: Init PLLHUB [0000.918] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.929] I> SDRAM initialized! [0000.932] I> SDRAM Size in Total 0x1000000000 [0000.936] I> Task: Dram Ecc scrub [0000.939] I> Task: DRAM alias check [0000.956] I> Task: Program NSDRAM carveout [0000.960] I> NSDRAM carveout encryption is enabled [0000.965] I> Program NSDRAM carveout [0000.968] I> Task: Register checker [0000.972] I> Task: Enable clock-mon [0000.986] I> FMON: Fmon re-programming done [0000.990] I> Task: Mapper init [0000.993] I> Task: SC7 Context Init [0000.996] I> Task: CCPLEX IST init [0000.999] I> Task: CPU WP0 [0001.003] I> Loading MCE [0001.006] I> Slot: 0 [0001.008] I> Binary[8] block-22784 (partition size: 0x80000) [0001.013] I> Binary name: MCE [0001.016] I> Size of crypto header is 8192 [0001.020] I> Size of crypto header is 8192 [0001.024] I> strt_pg_num(22784) num_of_pgs(16) read_buf(0x4003e000) [0001.030] I> BCH of MCE read from storage [0001.034] I> BCH address is : 0x4003e000 [0001.038] I> MCE header integrity check is success [0001.043] I> Binary magic in BCH component 0 is MTSM [0001.047] I> component binary type is 8 [0001.051] I> Size of crypto header is 8192 [0001.055] I> strt_pg_num(22800) num_of_pgs(350) read_buf(0x40000000) [0001.063] I> MCE binary is read from storage [0001.068] I> MCE binary integrity check is success [0001.072] I> Binary MCE loaded successfully at 0x40000000 (0x2baf0) [0001.079] I> Size of crypto header is 8192 [0001.090] I> Size of crypto header is 8192 [0001.094] I> Sending WP0 mailbox command to PSC [0001.103] I> Task: XUSB Powergate [0001.106] I> Skipping powergate XUSB. [0001.109] I> Task: MB1 fixed firewalls [0001.116] W> Firewall readback mismatch [0001.121] I> Task: Load bpmp-fw [0001.124] I> Slot: 0 [0001.126] I> Binary[15] block-9984 (partition size: 0x180000) [0001.131] I> Binary name: BPMP_FW [0001.134] I> Size of crypto header is 8192 [0001.138] I> Size of crypto header is 8192 [0001.142] I> strt_pg_num(9984) num_of_pgs(16) read_buf(0x807fe000) [0001.148] I> BCH of BPMP_FW read from storage [0001.153] I> BCH address is : 0x807fe000 [0001.156] I> BPMP_FW header integrity check is success [0001.161] I> Binary magic in BCH component 0 is BPMF [0001.166] I> component binary type is 15 [0001.170] I> Size of crypto header is 8192 [0001.174] I> strt_pg_num(10000) num_of_pgs(1990) read_buf(0x80000000) [0001.192] I> BPMP_FW binary is read from storage [0001.198] I> BPMP_FW binary integrity check is success [0001.203] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xf8bc0) [0001.209] I> Slot: 0 [0001.211] I> Binary[16] block-13056 (partition size: 0x400000) [0001.217] I> Binary name: BPMP_FW_DTB [0001.220] I> Size of crypto header is 8192 [0001.224] I> Size of crypto header is 8192 [0001.228] I> strt_pg_num(13056) num_of_pgs(16) read_buf(0x807fc000) [0001.235] I> BCH of BPMP_FW_DTB read from storage [0001.239] I> BCH address is : 0x807fc000 [0001.243] I> BPMP_FW_DTB header integrity check is success [0001.248] I> Binary magic in BCH component 0 is BPMD [0001.253] I> component binary type is 16 [0001.257] I> Size of crypto header is 8192 [0001.261] I> strt_pg_num(13072) num_of_pgs(502) read_buf(0x807bd3f0) [0001.270] I> BPMP_FW_DTB binary is read from storage [0001.275] I> BPMP_FW_DTB binary integrity check is success [0001.281] I> Binary BPMP_FW_DTB loaded successfully at 0x807bd3f0 (0x3eb00) [0001.287] I> Task: BPMP fw ast config [0001.291] I> Task: Load psc-fw [0001.294] I> Slot: 0 [0001.296] I> Binary[17] block-21248 (partition size: 0xc0000) [0001.301] I> Binary name: PSC_FW [0001.305] I> Size of crypto header is 8192 [0001.308] I> Size of crypto header is 8192 [0001.312] I> strt_pg_num(21248) num_of_pgs(16) read_buf(0x80ffe000) [0001.319] I> BCH of PSC_FW read from storage [0001.323] I> BCH address is : 0x80ffe000 [0001.327] I> PSC_FW header integrity check is success [0001.331] I> Binary magic in BCH component 0 is PFWP [0001.336] I> component binary type is 17 [0001.340] I> Size of crypto header is 8192 [0001.344] I> strt_pg_num(21264) num_of_pgs(591) read_buf(0x80fb4200) [0001.354] I> PSC_FW binary is read from storage [0001.359] I> PSC_FW binary integrity check is success [0001.363] I> Binary PSC_FW loaded successfully at 0x80fb4200 (0x49df0) [0001.370] I> Task: Load nvdec-fw [0001.373] I> Slot: 0 [0001.375] I> Binary[7] block-6400 (partition size: 0x100000) [0001.380] I> Binary name: NVDEC [0001.383] I> Size of crypto header is 8192 [0001.387] I> Size of crypto header is 8192 [0001.391] I> strt_pg_num(6400) num_of_pgs(16) read_buf(0x800fe000) [0001.397] I> BCH of NVDEC read from storage [0001.401] I> BCH address is : 0x800fe000 [0001.405] I> NVDEC header integrity check is success [0001.410] I> Binary magic in BCH component 0 is NDEC [0001.415] I> component binary type is 7 [0001.419] I> Size of crypto header is 8192 [0001.423] I> strt_pg_num(6416) num_of_pgs(560) read_buf(0x80000000) [0001.432] I> NVDEC binary is read from storage [0001.437] I> NVDEC binary integrity check is success [0001.442] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0001.448] I> Size of crypto header is 8192 [0001.459] I> Task: Load tsec-fw [0001.462] I> TSEC-FW load support not enabled [0001.466] I> Task: GPIO interrupt map [0001.470] I> Task: SC7 context save [0001.473] I> Slot: 0 [0001.475] I> Binary[27] block-0 (partition size: 0x100000) [0001.481] I> Binary name: BR_BCT [0001.484] I> Size of crypto header is 8192 [0001.488] I> Size of crypto header is 8192 [0001.492] I> Size of crypto header is 8192 [0001.496] I> strt_pg_num(0) num_of_pgs(16) read_buf(0xa0000000) [0001.502] I> BR_BCT binary is read from storage [0001.506] I> BR_BCT binary integrity check is success [0001.511] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.517] I> Slot: 0 [0001.519] I> Binary[13] block-23808 (partition size: 0x30000) [0001.525] I> Binary name: SC7-FW [0001.528] I> Size of crypto header is 8192 [0001.532] I> Size of crypto header is 8192 [0001.536] I> Size of crypto header is 8192 [0001.540] I> Size of crypto header is 8192 [0001.544] I> strt_pg_num(23808) num_of_pgs(16) read_buf(0xa0002000) [0001.550] I> BCH of SC7-FW read from storage [0001.554] I> BCH address is : 0xa0002000 [0001.558] I> SC7-FW header integrity check is success [0001.563] I> Binary magic in BCH component 0 is WB0B [0001.568] I> component binary type is 13 [0001.571] I> Size of crypto header is 8192 [0001.575] I> strt_pg_num(23824) num_of_pgs(349) read_buf(0xa0004000) [0001.583] I> SC7-FW binary is read from storage [0001.588] I> SC7-FW binary integrity check is success [0001.593] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x2ba00) [0001.599] I> Slot: 0 [0001.602] I> Binary[22] block-24192 (partition size: 0x30000) [0001.607] I> Binary name: PSC_RF [0001.610] I> Size of crypto header is 8192 [0001.614] I> Size of crypto header is 8192 [0001.618] I> Size of crypto header is 8192 [0001.622] I> Size of crypto header is 8192 [0001.626] I> strt_pg_num(24192) num_of_pgs(16) read_buf(0xa002fa00) [0001.632] I> BCH of PSC_RF read from storage [0001.636] I> BCH address is : 0xa002fa00 [0001.640] I> PSC_RF header integrity check is success [0001.645] I> Binary magic in BCH component 0 is PSCR [0001.650] I> component binary type is 22 [0001.654] I> Size of crypto header is 8192 [0001.657] I> strt_pg_num(24208) num_of_pgs(224) read_buf(0xa0031a00) [0001.665] I> PSC_RF binary is read from storage [0001.670] I> PSC_RF binary integrity check is success [0001.675] I> Binary PSC_RF loaded successfully at 0xa0031a00 (0x1be60) [0001.684] I> Task: Save WP0 payload to SC7 ctx [0001.688] I> Task: Load MB2rf binary to SC7 ctx [0001.693] I> Slot: 0 [0001.695] I> Binary[14] block-24576 (partition size: 0x20000) [0001.700] I> Binary name: MB2_RF [0001.703] I> Size of crypto header is 8192 [0001.707] I> Size of crypto header is 8192 [0001.711] I> Size of crypto header is 8192 [0001.715] I> Size of crypto header is 8192 [0001.719] I> strt_pg_num(24576) num_of_pgs(16) read_buf(0xa00d5d10) [0001.725] I> BCH of MB2_RF read from storage [0001.729] I> BCH address is : 0xa00d5d10 [0001.733] I> MB2_RF header integrity check is success [0001.738] I> Binary magic in BCH component 0 is MB2R [0001.743] I> component binary type is 14 [0001.747] I> Size of crypto header is 8192 [0001.751] I> strt_pg_num(24592) num_of_pgs(224) read_buf(0xa00d7d10) [0001.758] I> MB2_RF binary is read from storage [0001.763] I> MB2_RF binary integrity check is success [0001.768] I> Binary MB2_RF loaded successfully at 0xa00d7d10 (0x1bf60) [0001.774] I> Task: Save fuse alias data to SC7 ctx [0001.779] I> Task: Save PMIC data to SC7 ctx [0001.783] I> Task: Save Pinmux data to SC7 ctx [0001.787] I> Task: Save Pad Voltage data to SC7 ctx [0001.792] I> Task: Save controller prod data to SC7 ctx [0001.797] I> Task: Save prod cfg data to SC7 ctx [0001.801] I> Task: Save I2C bus freq data to SC7 ctx [0001.806] I> Task: Save SOCTherm data to SC7 ctx [0001.811] I> Task: Save FMON data to SC7 ctx [0001.815] I> Task: Save VMON data to SC7 ctx [0001.819] I> Task: Save TZDRAM data to SC7 ctx [0001.823] I> Task: Save GPIO int data to SC7 ctx [0001.827] I> Task: Save clock data to SC7 ctx [0001.832] I> Task: Save debug data to SC7 ctx [0001.836] I> Task: Save MBWT data to SC7 ctx [0001.844] I> SC7 context save done [0001.847] I> Task: Load MB2/Applet/FSKP [0001.851] I> Loading MB2 [0001.853] I> Slot: 0 [0001.855] I> Binary[6] block-8448 (partition size: 0x80000) [0001.861] I> Binary name: MB2 [0001.864] I> Size of crypto header is 8192 [0001.867] I> Size of crypto header is 8192 [0001.871] I> strt_pg_num(8448) num_of_pgs(16) read_buf(0x8007e000) [0001.878] I> BCH of MB2 read from storage [0001.881] I> BCH address is : 0x8007e000 [0001.885] I> MB2 header integrity check is success [0001.890] I> Binary magic in BCH component 0 is MB2B [0001.895] I> component binary type is 6 [0001.898] I> Size of crypto header is 8192 [0001.902] I> strt_pg_num(8464) num_of_pgs(846) read_buf(0x80000000) [0001.913] I> MB2 binary is read from storage [0001.918] I> MB2 binary integrity check is success [0001.923] I> Binary MB2 loaded successfully at 0x80000000 (0x69a70) [0001.929] I> Task: Map CCPLEX SHARED carveout [0001.933] I> Task: Prepare MB2 params [0001.937] I> Task: Dram ecc test [0001.940] I> Task: Misc NV security settings [0001.944] I> NVDEC sticky bits programming done [0001.949] I> Successfully powergated NVDEC [0001.953] I> Task: Disable/Reload WDT [0001.956] I> Task: Program misc carveouts [0001.960] I> Program IPC carveouts [0001.963] I> Task: Disable SCPM/POD reset [0001.967] I> SLCG Global override status := 0x0 [0001.972] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-22833a33) I> t234-A01-1-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x001e8c5c I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x102e000000, size:0x800000] I> Task: SE error check I> Task: Crypto init I> Task: MB2 Params integrity check I> Task: Enable CCPLEX WDT 5th expiry I> Task: ARI update carveout TZDRAM I> Task: Configure OEM set LA/PTSA values I> Task: Check MC errors I> Task: SMMU external bypass disable I> Task: Enable hot-plug capability I> Task: TZDRAM heap init I> Task: PSC mailbox init I> Task: Enable clock for external modules I> Task: Measured Boot init I> Task: fTPM silicon identity init I> fTPM is not enabled. I> Task: OEM SC7 context save init I> Task: I2C register I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout I> Task: Program CBB PCIE AMAP regions I> Task: Boot device init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: QSPI_FLASH instance: 0 I> Secondary storage device: SDMMC_USER instance: 3 I> sdmmc HS400 mode enabled I> Task: Partition Manager Init I> strt_pg_num(1) num_of_pgs(1) read_buf(0x102e001000) I> strt_pg_num(131071) num_of_pgs(1) read_buf(0x102e001000) I> strt_pg_num(131039) num_of_pgs(32) read_buf(0x102e001200) I> Found 60 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 W> PARTITION_MANAGER: Failed to publish partition. I> Found 15 partitions in SDMMC_USER (instance 3) I> Task: Pass DRAM ECC PRL Flag to FSI I> Task: Load and authenticate registered FWs I> Task: Load AUXP FWs I> Successfully register SPE FW load task with MB2 loader I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Successfully register PVA FW load task with MB2 loader I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> strt_pg_num(55040) num_of_pgs(16) read_buf(0x40067a30) I> strt_pg_num(55056) num_of_pgs(512) read_buf(0x102d600000) I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> strt_pg_num(56192) num_of_pgs(16) read_buf(0x40067a30) I> strt_pg_num(56208) num_of_pgs(880) read_buf(0x102d200000) I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x102d600000 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> strt_pg_num(44800) num_of_pgs(16) read_buf(0x40067a30) I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x102d200000 I> Successfully register RCE FW context save task with MB2 loader I> dce : oem authentication of header done I> strt_pg_num(44816) num_of_pgs(1) read_buf(0x102e1403d8) I> strt_pg_num(44816) num_of_pgs(8) read_buf(0x102e1403d8) I> dce : meta-blob integrity check is success. I> strt_pg_num(44824) num_of_pgs(512) read_buf(0x102e0003c0) I> strt_pg_num(45336) num_of_pgs(512) read_buf(0x102e0403c0) I> dce : will be decompressed at 0x1036000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> strt_pg_num(45848) num_of_pgs(512) read_buf(0x102e0803c0) I> dce : decompressed to 12065792 bytes I> dce: plain binary integrity check is success I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> strt_pg_num(58240) num_of_pgs(16) read_buf(0x40067a30) I> strt_pg_num(58256) num_of_pgs(800) read_buf(0x1038800000) I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x1036000000 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> strt_pg_num(9472) num_of_pgs(16) read_buf(0x40067a30) I> strt_pg_num(9488) num_of_pgs(312) read_buf(0x102d700000) I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x1038800000 I> Successfully register APE FW context save task with MB2 loader I> Partition name: A_pva-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-62336 (partition size: 0x40000), name: A_pva-fw I> strt_pg_num(62336) num_of_pgs(16) read_buf(0x40067a30) I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x102d700000 I> Successfully register XUSB FW context save task with MB2 loader I> pva-fw : oem authentication of header done I> strt_pg_num(62352) num_of_pgs(1) read_buf(0x102e1403d8) I> strt_pg_num(62352) num_of_pgs(8) read_buf(0x102e1403d8) I> pva-fw : meta-blob integrity check is success. I> strt_pg_num(62360) num_of_pgs(512) read_buf(0x102e0003c0) I> pva-fw : will be decompressed at 0x102d980000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> pva-fw : decompressed to 2156512 bytes I> pva-fw: plain binary integrity check is success I> pva-fw: Authentication Finalize Done I> Binary pva-fw loaded successfully at 0x102d980000 I> Successfully register PVA FW context save task with MB2 loader I> Task: Check MC errors I> Task: Carveout setup I> Program remaining OEM carveouts I> Task: Enable FSITHERM I> Task: Enable FSI VMON I> FSI VMON: FSI Vmon re-calibration and fine tuning done I> Task: Validate FSI Therm readings I> Task: Restore XUSB sec I> Task: Enable FSI SE clock I> Enable FSI-SE clock... I> Task: Initialize SBSA UART CAR I> Task: Initialize CPUBL Params I> CPUBL-params @ 0x1032000000 I> Task: Ratchet update W> Skip ratchet update - OPTIN fuse not set I> Task: Prepare eeprom data I> Task: Revoke PKC fuse I> PKC revoke fuse burn not requested I> Task: FSI padctl context save I> Task: Unpowergate APE W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: Memctrl reconfig pending clients I> Task: OEM firewalls I> OEM firewalls configured I> Task: Powergate APE I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings I> Task: Unhalt AUXPs I> Unhalting SPE.. I> Enabling combined UART ▒▒▒▒spe: early_init ▒▒▒▒vic initialized ▒▒▒▒tsc initialized ▒▒▒▒aon lic initialized ▒▒▒▒spe: tag is 5243985d1b1eb3f06fac6d36bd7e74ac ▒▒▒▒spe: SafeRTOS v8.4 ▒▒▒▒spe: init ▒▒▒▒scheduler initialized ▒▒▒▒aon hsp initialized ▒▒▒▒tag initialized ▒▒▒▒tcu initialized ▒▒▒▒bpmp ipc initialized ▒▒▒▒spe: late init ▒▒▒▒cpu_nic clock initialized ▒▒▒▒apb clock initialized ▒▒▒▒pm initialized ▒▒▒▒bpmp hsp initialized ▒▒▒▒top1 hsp initialized ▒▒▒▒ccplex ipc initialized ▒▒▒▒spe: start scheduler ▒▒▒▒ I> Task: Trigger mailbox for PSC-BL1 exit I> Sending opcode 0x4d420802 to psc I> Received ACK from psc I> Task: Start secure NOR provision I> Skip Secure NOR provisioning I> Task: Trigger load FSI keyblob I> Skipping FSI key blob copy I> Task: Complete load FSI keyblob I> Skipping FSI key blob copy I> Task: MB2-PSC_FW Key Manager Init I> Sending opcode OP_PSC_KEY_MANAGER to psc-fw I> Sending opcode 0x4b45594d t▒▒ hwwdt_init: WDT boot cfg 0x710010 sts 0x10 bpmp: socket 0 bpmp: base binary md5 is da583751bbfe2b7f6e204562d97ff39e bpmp: combined binary md5 is 39f77b2baaf3f0522607569dd3ae9a48 bpmp: firmware tag is 39f77b2baaf3f0522607-da583751bbf initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early initialized pm 465 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ▒▒o psc I> Received ACK from psc I> Task: Unhalt FSI I> FSI unhalt skipped I> Task: Unhalt AUXPs I> Unhalting RCE I> RCE unhalt successful I> Unhalting DCE I> DCE unhalt successful I> APE unhalt skipped I> Task: Load HV/CPUBL I> Task: Load TOS I> Task: Trigger load TS▒▒initialized avfs_clk_platform initialized powergate ▒▒[ 2.788659] Camera-FW on t234-rce-safe started TCU early console enabled. ▒▒EC ley▒▒initialized dvs initialized clk_mach_config initialized suspend initialized strap initialized mce_dbell ▒▒blob I> Sending opcode 0x53535452 to psc ▒▒ ▒▒I> Sent opcode to psc I> Task: Load and authenticate registered FWs I> Partition name: A_cpu-bootloader I> Size of partition: 3670016 I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloader ▒▒DCE Started ▒▒I> strt_pg_num(24832) num_of_pgs(16) read_buf(0x40067a30) I> cpubl : oem authentication of header done I> strt_pg_num(24848) num_of_pgs(1) read_buf(0x102e143f98) I> strt_pg_num(24848) num_of_pgs(8) read_buf(0x102e143f98) ▒▒DCE_R5_Init ▒▒I> cpubl : meta-blob integrity check is success. I> strt_pg_num(248▒▒initialized emc initialized emc_mrq ▒▒MPU enabled ▒▒56) num_of_pgs(512) read_buf(0x10▒▒initialized clk_cal initialized uphy_dt initialized uphy_mrq HSIO UPHY reset has been de-asserted 0x0 ▒▒2e003f▒▒initialized uphy ▒▒80) ▒▒DCE_SW_Init ▒▒initialized pg_late initialized pg_mrq_init swdtimer_init: reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ▒▒I> strt_pg_num(25368) num_of_pgs(512) read_buf(0x102e043f80) I> cpubl : will be▒▒initialized clk_cal_late initialized noc_late initialized cvc ▒▒ decompressed at 0x102c800000 I> ver▒▒initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable pwm3 enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable pllc4_muxed enable sdmmc4_axicif enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp enable sdmmc_legacy_tm initialized clk_mach_post initialized pg_post initialized regulator_post initialized profile initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete ▒▒[ 2.990141] Camera-FW on t234-rce-safe ready SHA1=e2238c99 (crt 12.432 ms, total boot 214.987 ms) ▒▒sion 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> strt_pg_num(25880) num_of_pgs(512) read_buf(0x102e083f80) I> strt_pg_num(26392) num_of_pgs(512) read_buf(0x102e0c3f80) I> strt_pg_num(26904) num_of_pgs(512) read_buf(0x102e103f80) I> strt_pg_num(27416) num_of_pgs(512) read_buf(0x102e003f80) I> strt_pg_num(27928) num_of_pgs(512) read_buf(0x102e043f80) I> strt_pg_num(28440) num_of_pgs(512) read_buf(0x102e083f80) I> strt_pg_num(28952) num_of_pgs(512) read_buf(0x102e0c3f80) I> strt_pg_num(29464) num_of_pgs(512) read_buf(0x102e103f80) I> strt_pg_num(29976) num_of_pgs(512) read_buf(0x102e003f80) ▒▒Admin Task Init Admin Task Init complete Print Task Init RM ▒▒I> strt_pg_num(30488) num_of_pgs(512) read_buf(0x102e043f80) ▒▒Task Init SHA Task Init Admin Task Started DCE SC7 SHA Enabled RM Task Started RM Task Running Print Task Started Print Task Running SHA Task Started DCE: FW Boot Co▒▒I> strt_pg_num(31000) num_of_pgs(512) read_buf(0x102e083f80) ▒▒mplete Admin Task Running SHA Task Running ▒▒I> cpubl : decompressed to 3616896 bytes I> cpubl: plain binary integrity check is success I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os I> strt_pg_num(32000) num_of_pgs(16) read_buf(0x40067a30) I> strt_pg_num(32016) num_of_pgs(3672) read_buf(0x103fd35000) I> MB2-params @ 0x40060000 I> NSDRAM carveout base: 0x80000000, size: 0xfacdf0000 I> cpubl_params: nsdram: carveout: 1, encryption: 1 I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0x102c800000 I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x103fd35000 I> Relocating OP-TEE dtb from: 0x103feff180 to 0x103c040020, size: 0x2754 I> [0] START: 0x80000000, SIZE: 0xfacdf0000 I> [1] START: 0x1032000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> strt_pg_num(44288) num_of_pgs(16) read_buf(0x40067a30) I> strt_pg_num(44304) num_of_pgs(8) read_buf(0x103c020000) I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x103c020000 I> EKB detected (length: 0x410) @ VA:0x103c020000 I> Task: Add cpubl params integrity check I> Added cpubl params digest. I> Task: Prepare TOS params I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x103c040020 I> NVRNG: Health check success I> NVRNG: Health check success I> Task: OEM SC7 context save I> OEM sc7 context saved I> Task: Disable MSS perf stats I> Task: Program display sticky bits I> Task: Storage device deinit I> Task: SMMU init I> Task: Program GICv3 registers I> Task: Audit firewall settings I> Task: Bootchain failure check I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> Task: Burn RESERVED_ODM0 fuse I> Task: Lock fusing I> Task: Clear dec source key I> MB2 finished ▒▒NOTICE: BL31: v2.8(release):e12e3fa93 NOTICE: BL31: Built : 17:14:28, Jan 7 2025 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 4.2 (gcc version 11.3.0 (Buildroot 2022.08)) #2 Wed Jan 8 01:24:03 UTC 2025 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Test OEM keys are being used. This is insecure for shipping products! I/TC: fTPM ID is not enabled. I/TC: ftpm-helper PTA: fTPM DT or EKB is not available. fTPM provisioning is not supported. I/TC: Primary CPU switching to normal world boot ▒▒ Jetson UEFI firmware (version 36.4.3-gcid-38968081 built on 2025-01-08T01:18:20+00:00) ▒▒I/TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled I/TC: WARNING: Test UEFI variable auth key is being used ! I/TC: WARNING: UEFI variable protection is not fully enabled ! ▒▒ ▒▒[ 6.288876] Camera-FW on t234-rce-safe started TCU early console enabled. ▒▒ ▒▒[ 6.350702] Camera-FW on t234-rce-safe ready SHA1=e2238c99 (crt 1.355 ms, total boot 63.244 ms) ▒▒ Jetson System firmware version 36.4.3-gcid-38968081 date 2025-01-08T01:18:20+00: 00 ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services... ▒▒debugfs initialized ▒▒I/TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled ▒▒[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.15.148-rt-tegra (ma@ubuntu) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2022.08) 11.3.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT_RT Wed Aug 13 20:59:11 PDT 2025 () [ 0.000000] Machine model: NVIDIA Jetson AGX Orin Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x1027fdf198 TPMFinalLog=0x1018ba0000 SMBIOS=0xffff0000 SMBIOS 3.0=0x10279d0000 MEMATTR=0x1021994018 ESRT=0x1020903498 TPMEventLog=0x1018bb8018 RNG=0x10152c0018 MEMRESERVE=0x1018bbac18 [ 0.000000] random: crng init done [ 0.000000] secureboot: Secure boot disabled [ 0.000000] esrt: Reserving ESRT space from 0x0000001020903498 to 0x00000010209034d0. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000ff5000000, size 512 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x0000001033ffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x1022d177c0-0x1022d19fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000001033ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000001018a31fff] [ 0.000000] node 0: [mem 0x0000001018a32000-0x0000001018baffff] [ 0.000000] node 0: [mem 0x0000001018bb0000-0x0000001018bbafff] [ 0.000000] node 0: [mem 0x0000001018bbb000-0x0000001018bbbfff] [ 0.000000] node 0: [mem 0x0000001018bbc000-0x000000102609ffff] [ 0.000000] node 0: [mem 0x00000010260a0000-0x0000001027fdffff] [ 0.000000] node 0: [mem 0x0000001027fe0000-0x000000102c5fffff] [ 0.000000] node 0: [mem 0x000000102c600000-0x000000102c7fffff] [ 0.000000] node 0: [mem 0x000000102c800000-0x000000102cd6ffff] [ 0.000000] node 0: [mem 0x000000102d700000-0x000000102d7fffff] [ 0.000000] node 0: [mem 0x0000001032000000-0x0000001033ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000001033ffffff] [ 0.000000] On node 0, zone Normal: 2448 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 18432 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 28 pages/cpu s77744 r8192 d28752 u114688 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Address authentication (architected algorithm) [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Hardware dirty bit management [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) ▒▒WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpusysclk ▒▒[ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16187760 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 firmware_class.path=/etc/firmware fbcon=map:0 nospectre_bhb video=efifb:off console=tty0 bl_prof_dataptr=2031616@0x102C610000 bl_prof_ro_ptr=65536@0x102C600000 ▒▒WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc1clk ▒▒[ 0.000000] Unknown kernel command line parameters "mminit_loglevel=4 fbcon=map:0 bl_prof_dataptr=2031616@0x102C610000 bl_prof_ro_ptr=65536@0x102C600000", will be passed to user space. [ ▒▒WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc0clk ▒▒ 0.000000] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfe0000-0x00000000fffe0000] (64MB) [ 0.000000] Memory: 63803128K/65780160K available (18944K kernel code, 4044K rwdata, 9864K rodata, 7488K init, 551K bss, 1452744K reserved, 524288K cma-reserved) ▒▒WARNING: clock_disable: clk_power_ungate on gated domain 34 for dla1_core ▒▒[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12. ▒▒WARNING: clock_disable: clk_power_ungate on gated domain 34 for nafll_dla1_core ▒▒[ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant o▒▒WARNING: clock_disable: clk_power_ungate on gated domain 34 for dla1_falcon ▒▒f Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, prea▒▒WARNING: clock_disable: clk_power_ungate on gated domain 34 for nafll_dla1_falcon ▒▒llocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_ha▒▒WARNING: clock_disable: clk_power_ungate on gated domain 34 for dla0_core ▒▒ndle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe▒▒WARNING: clock_disable: clk_power_ungate on gated domain 34 for nafll_dla0_core ▒▒6a171046, max_idle_ns: 881590405314 ns [ 0.000001] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000412] Console: colour dummy device 80x25 [ 0.000423] printk: console [tty0] enabled [ 0.000488] Calibrating delay loop (skipped), va▒▒WARNING: clock_disable: clk_power_ungate on gated domain 34 for dla0_falcon ▒▒lue calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000496] pid_max: default: 32768 minimum: 301 [ 0.000548] LSM: Security Framework initializing [ 0.000573] Yama: becoming mindful. [ 0.000593] SELinux: Initializing. [ 0.000889] Mount-cache has▒▒WARNING: clock_disable: clk_power_ungate on gated domain 34 for nafll_dla0_falcon ▒▒h table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.001099] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.002989] rcu: Hierarchical SRCU implementation. [ 0.006126] Tegra Revision: A01 SKU: 208 CPU Process: 0 SoC Process: 0 [ 0.006441] Remapping and enabling EFI services. [ 0.007391] smp: Bringing up secondary CPUs ... [ 0.007978] Detected PIPT I-cache on CPU1 [ 0.008024] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.008074] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.008604] Detected PIPT I-cache on CPU2 [ 0.008618] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.008633] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.009113] Detected PIPT I-cache on CPU3 [ 0.009123] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.009136] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.011644] Detected PIPT I-cache on CPU4 [ 0.011670] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.011695] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.012226] Detected PIPT I-cache on CPU5 [ 0.012236] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.012251] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.012742] Detected PIPT I-cache on CPU6 [ 0.012753] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.012766] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.013282] Detected PIPT I-cache on CPU7 [ 0.013293] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.013306] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.015835] Detected PIPT I-cache on CPU8 [ 0.015862] GICv3: CPU8: found redistributor 20000 region 0:0x000000000f540000 [ 0.015888] CPU8: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.016426] Detected PIPT I-cache on CPU9 [ 0.016437] GICv3: CPU9: found redistributor 20100 region 0:0x000000000f560000 [ 0.016451] CPU9: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.016938] Detected PIPT I-cache on CPU10 [ 0.016950] GICv3: CPU10: found redistributor 20200 region 0:0x000000000f580000 [ 0.016963] CPU10: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.017446] Detected PIPT I-cache on CPU11 [ 0.017458] GICv3: CPU11: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.017471] CPU11: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.017530] smp: Brought up 1 node, 12 CPUs [ 0.017535] SMP: Total of 12 processors activated. [ 0.017538] CPU features: detected: 32-bit EL0 Support [ 0.017539] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.017541] CPU features: detected: Common not Private translations [ 0.017542] CPU features: detected: CRC32 instructions [ 0.017542] CPU features: detected: Data cache clean to Point of Persistence [ 0.017544] CPU features: detected: Generic authentication (architected algorithm) [ 0.017544] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.017545] CPU features: detected: LSE atomic instructions [ 0.017546] CPU features: detected: Privileged Access Never [ 0.017546] CPU features: detected: RAS Extension Support [ 0.017547] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.031387] spectre-bhb mitigation disabled by command line option [ 0.044030] CPU: All CPU(s) started at EL2 [ 0.047500] devtmpfs: initialized [ 0.073989] KASLR enabled [ 0.074235] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.074265] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.084067] pinctrl core: initialized pinctrl subsystem [ 0.085271] SMBIOS 3.6.0 present. [ 0.085283] DMI: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.4.3-gcid-38968081 01/08/2025 [ 0.085997] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.088721] DMA: preallocated 8192 KiB GFP_KERNEL pool for atomic allocations [ 0.089400] DMA: preallocated 8192 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.090042] DMA: preallocated 8192 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.090142] audit: initializing netlink subsys (disabled) [ 0.090326] audit: type=2000 audit(0.088:1): state=initialized audit_enabled=0 res=1 [ 0.092433] thermal_sys: Registered thermal governor 'step_wise' [ 0.092436] thermal_sys: Registered thermal governor 'user_space' [ 0.092436] thermal_sys: Registered thermal governor 'power_allocator' [ 0.097711] cpuidle: using governor menu [ 0.098113] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.098295] ASID allocator initialised with 32768 entries [ 0.100653] Serial: AMBA PL011 UART driver [ 0.114001] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 118, base_baud = 0) is a SBSA [ 0.114045] printk: console [ttyAMA0] enabled [ 0.129781] platform bpmp: Fixing up cyclic dependency with 2c60000.external-memory-controller [ 0.140166] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.140178] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.140183] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.140184] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.141345] cryptd: max_cpu_qlen set to 1000 [ 0.144277] ACPI: Interpreter disabled. [ 0.146985] iommu: Default domain type: Translated [ 0.146990] iommu: DMA domain TLB invalidation policy: strict mode [ 0.147376] SCSI subsystem initialized [ 0.147596] vgaarb: loaded [ 0.147820] usbcore: registered new interface driver usbfs [ 0.147850] usbcore: registered new interface driver hub [ 0.147876] usbcore: registered new device driver usb [ 0.148361] pps_core: LinuxPPS API ver. 1 registered [ 0.148368] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.148390] PTP clock support registered [ 0.148469] EDAC MC: Ver: 3.0.0 [ 0.150331] Registered efivars operations [ 0.151161] FPGA manager framework [ 0.151264] Advanced Linux Sound Architecture Driver Initialized. [ 0.151864] Bluetooth: Core ver 2.22 [ 0.151905] NET: Registered PF_BLUETOOTH protocol family [ 0.151908] Bluetooth: HCI device and connection manager initialized [ 0.151922] Bluetooth: HCI socket layer initialized [ 0.151931] Bluetooth: L2CAP socket layer initialized [ 0.151948] Bluetooth: SCO socket layer initialized [ 0.152444] clocksource: Switched to clocksource arch_sys_counter [ 0.199923] VFS: Disk quotas dquot_6.6.0 [ 0.200008] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.200306] pnp: PnP ACPI: disabled [ 0.204195] NET: Registered PF_INET protocol family [ 0.205299] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.208167] tcp_listen_portaddr_hash hash table entries: 32768 (order: 8, 1310720 bytes, linear) [ 0.209999] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.210049] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.210535] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes, linear) [ 0.214175] TCP: Hash tables configured (established 524288 bind 65536) [ 0.214592] UDP hash table entries: 32768 (order: 9, 3145728 bytes, linear) [ 0.219078] UDP-Lite hash table entries: 32768 (order: 9, 3145728 bytes, linear) [ 0.223843] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.224514] RPC: Registered named UNIX socket transport module. [ 0.224518] RPC: Registered udp transport module. [ 0.224519] RPC: Registered tcp transport module. [ 0.224519] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.224536] PCI: CLS 0 bytes, default 64 [ 0.224830] Unpacking initramfs... [ 0.232613] hw perfevents: enabled with armv8_cortex_a78 PMU driver, 7 counters available [ 0.236619] Initialise system trusted keyrings [ 0.236672] Key type blacklist registered [ 0.236803] workingset: timestamp_bits=42 max_order=24 bucket_order=0 [ 0.242127] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.242677] NFS: Registering the id_resolver key type [ 0.242715] Key type id_resolver registered [ 0.242719] Key type id_legacy registered [ 0.242782] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.242799] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.242834] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.243109] 9p: Installing v9fs 9p2000 file system support [ 0.243941] integrity: Platform Keyring initialized [ 0.254297] Key type asymmetric registered [ 0.254304] Asymmetric key parser 'x509' registered [ 0.254377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.254385] io scheduler mq-deadline registered [ 0.254393] io scheduler kyber registered [ 0.267804] EINJ: ACPI disabled. [ 0.281494] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.283548] SuperH (H)SCI(F) driver initialized [ 0.283934] msm_serial: driver initialized [ 0.284694] printk: console [ttyTCU0] enabled [ 0.285644] arm-smmu 8000000.iommu: probing hardware configuration... [ 0.285650] arm-smmu 8000000.iommu: SMMUv2 with: [ 0.285658] arm-smmu 8000000.iommu: stage 1 translation [ 0.285660] arm-smmu 8000000.iommu: stage 2 translation [ 0.285661] arm-smmu 8000000.iommu: nested translation [ 0.285670] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 0.285672] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 0.285686] arm-smmu 8000000.iommu: Supported page sizes: 0x61311000 [ 0.285688] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.285689] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.286915] arm-smmu 10000000.iommu: probing hardware configuration... [ 0.286918] arm-smmu 10000000.iommu: SMMUv2 with: [ 0.286922] arm-smmu 10000000.iommu: stage 1 translation [ 0.286922] arm-smmu 10000000.iommu: stage 2 translation [ 0.286923] arm-smmu 10000000.iommu: nested translation [ 0.286928] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 0.286929] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 0.286938] arm-smmu 10000000.iommu: Supported page sizes: 0x61311000 [ 0.286939] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.286940] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.287383] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.287386] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.287388] arm-smmu 12000000.iommu: stage 1 translation [ 0.287389] arm-smmu 12000000.iommu: stage 2 translation [ 0.287390] arm-smmu 12000000.iommu: nested translation [ 0.287396] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 0.287397] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 0.287403] arm-smmu 12000000.iommu: Supported page sizes: 0x61311000 [ 0.287404] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.287404] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.302389] loop: module loaded [ 0.303670] megasas: 07.717.02.00-rc1 [ 0.308492] tun: Universal TUN/TAP device driver, 1.6 [ 0.309117] thunder_xcv, ver 1.0 [ 0.309151] thunder_bgx, ver 1.0 [ 0.309173] nicpf, ver 1.0 [ 0.310096] hclge is initializing [ 0.310135] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.310143] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.310189] e1000: Intel(R) PRO/1000 Network Driver [ 0.310194] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.310230] e1000e: Intel(R) PRO/1000 Network Driver [ 0.310233] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.310276] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.310280] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.310299] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.310302] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.310544] sky2: driver version 1.30 [ 0.311258] VFIO - User Level meta-driver version: 0.3 [ 0.312930] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.312942] ehci-pci: EHCI PCI platform driver [ 0.312985] ehci-platform: EHCI generic platform driver [ 0.313061] ehci-orion: EHCI orion driver [ 0.313129] ehci-exynos: EHCI Exynos driver [ 0.313210] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.313240] ohci-pci: OHCI PCI platform driver [ 0.313268] ohci-platform: OHCI generic platform driver [ 0.313345] ohci-exynos: OHCI Exynos driver [ 0.313802] usbcore: registered new interface driver usb-storage [ 0.315814] i2c_dev: i2c /dev entries driver [ 0.317220] pps pps0: new PPS source ktimer [ 0.317230] pps pps0: ktimer PPS source registered [ 0.317239] pps_ldisc: PPS line discipline registered [ 0.319536] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 0.321870] sdhci: Secure Digital Host Controller Interface driver [ 0.321875] sdhci: Copyright(c) Pierre Ossman [ 0.322359] Synopsys Designware Multimedia Card Interface Driver [ 0.323015] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.325166] SMCCC: SOC_ID: ID = jep106:036b:0234 Revision = 0x00000401 [ 0.325687] tegra-bpmp bpmp: Adding to iommu group 0 [ 0.328013] tegra-bpmp bpmp: firmware: 39f77b2baaf3f0522607-da583751bbf [ 0.484152] Freeing initrd memory: 15492K [ 1.827731] clocksource: tsc: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 1.827742] clocksource: osc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 49772407460 ns [ 1.827746] clocksource: usec: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 1.827957] hid: raw HID events driver (C) Jiri Kosina [ 1.828165] usbcore: registered new interface driver usbhid [ 1.828172] usbhid: USB HID core driver [ 1.832264] optee: probing for conduit method. [ 1.832308] optee: revision 4.2 (d78bc5fa) [ 1.890985] optee: dynamic shared memory is enabled [ 1.891251] optee: initialized driver [ 1.894749] usbcore: registered new interface driver snd-usb-audio [ 1.896414] NET: Registered PF_PACKET protocol family [ 1.897528] Bluetooth: RFCOMM TTY layer initialized [ 1.897543] Bluetooth: RFCOMM socket layer initialized [ 1.897564] Bluetooth: RFCOMM ver 1.11 [ 1.897812] 9pnet: Installing 9P2000 support [ 1.897933] Key type dns_resolver registered [ 1.899253] printk: console [tty0]: printing thread started [ 1.900327] printk: console [ttyTCU0]: printing thread started [ 1.901400] printk: console [ttyAMA0]: printing thread started [ 1.901484] Loading compiled-in X.509 certificates [ 1.904922] Loaded X.509 cert 'Build time autogenerated kernel key: 60cc6a6928bdc27a2c7d4c4b633435fa8ca57a34' [ 2.007270] gpio-394 (camera-control-output-low): hogged as output/low [ 2.007298] gpio-397 (camera-control-output-low): hogged as output/low [ 2.007319] gpio-487 (camera-control-output-low): hogged as output/low [ 2.007337] gpio-486 (camera-control-output-low): hogged as output/low [ 2.052222] simple-framebuffer chosen:framebuffer: framebuffer at 0x1039e00000, 0x870000 bytes [ 2.052235] simple-framebuffer chosen:framebuffer: format=x8r8g8b8, mode=1920x1080x32, linelength=8192 [ 2.055302] simple-framebuffer chosen:framebuffer: fb0: simplefb registered! [ 2.056079] tegra-gpcdma 2600000.dma-controller: Adding to iommu group 1 [ 2.061223] tegra-gpcdma 2600000.dma-controller: GPC DMA driver register 31 channels [ 2.062524] serial-tegra 3100000.serial: RX in PIO mode [ 2.062531] serial-tegra 3100000.serial: TX in PIO mode [ 2.062595] 3100000.serial: ttyTHS1 at MMIO 0x3100000 (irq = 112, base_baud = 0) is a TEGRA_UART [ 2.064371] serial-tegra 3110000.serial: RX in PIO mode [ 2.064374] serial-tegra 3110000.serial: TX in PIO mode [ 2.064486] 3110000.serial: ttyTHS2 at MMIO 0x3110000 (irq = 215, base_baud = 0) is a TEGRA_UART [ 2.071973] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.071989] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.072642] tegra-i2c 3160000.i2c: Adding to iommu group 1 [ 2.085337] tegra-i2c 3180000.i2c: Adding to iommu group 1 [ 2.096119] tegra-i2c 3190000.i2c: Adding to iommu group 1 [ 2.108029] tegra-i2c 31b0000.i2c: Adding to iommu group 1 [ 2.119419] tegra-i2c 31c0000.i2c: Adding to iommu group 1 [ 2.131058] tegra-i2c 31e0000.i2c: Adding to iommu group 1 [ 2.143079] tegra-i2c c240000.i2c: Adding to iommu group 1 [ 2.155094] tegra-i2c c250000.i2c: Adding to iommu group 1 [ 2.196090] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2009000 KHz, changing to: 2035200 KHz [ 2.199784] cpufreq: cpufreq_online: CPU8: Running at unlisted initial frequency: 2009000 KHz, changing to: 2035200 KHz [ 2.203104] sdhci-tegra 3460000.mmc: Adding to iommu group 2 [ 2.207526] tegra-xusb 3610000.usb: Adding to iommu group 3 [ 2.214744] mmc0: CQHCI version 5.10 [ 2.226980] tegra-xusb 3610000.usb: Firmware timestamp: 2023-02-10 03:48:10 UTC [ 2.226988] tegra-xusb 3610000.usb: xHCI Host Controller [ 2.227003] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 1 [ 2.227758] tegra-xusb 3610000.usb: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000010810 [ 2.228592] tegra-xusb 3610000.usb: irq 127, io mem 0x03610000 [ 2.228738] tegra-xusb 3610000.usb: xHCI Host Controller [ 2.228742] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 2 [ 2.228745] tegra-xusb 3610000.usb: Host supports USB 3.1 Enhanced SuperSpeed [ 2.229192] hub 1-0:1.0: USB hub found [ 2.229206] hub 1-0:1.0: 4 ports detected [ 2.229519] hub 2-0:1.0: USB hub found [ 2.229532] hub 2-0:1.0: 4 ports detected [ 2.232153] sdhci-tegra 3400000.mmc: Adding to iommu group 4 [ 2.233408] irq: IRQ249: trimming hierarchy from :bus@0:pmc@c360000 [ 2.233789] irq: IRQ250: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [ 2.234361] irq: IRQ251: trimming hierarchy from :bus@0:pmc@c360000 [ 2.234656] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.568700] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.636210] ALSA device list: [ 2.636214] No soundcards found. [ 2.640162] sdhci-tegra 3400000.mmc: Got CD GPIO [ 2.652089] mmc0: SDHCI controller on 3460000.mmc [3460000.mmc] using ADMA 64-bit [ 2.685120] irq: IRQ252: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [ 2.685602] mmc1: SDHCI controller on 3400000.mmc [3400000.mmc] using ADMA 64-bit [ 2.687097] Freeing unused kernel memory: 7488K [ 2.687165] Run /init as init process [ 2.704036] Checking overlayfs setting... [ 2.724019] hub 1-2:1.0: USB hub found [ 2.724573] hub 1-2:1.0: 4 ports detected [ 2.738917] Overlayfs is disabled... [ 2.745966] Root device found: mmcblk0p1 [ 2.750507] mmc0: Command Queue Engine enabled [ 2.750518] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.750814] mmcblk0: mmc0:0001 DG4064 59.2 GiB [ 2.754170] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 [ 2.754811] mmcblk0boot0: mmc0:0001 DG4064 4.00 MiB [ 2.755395] mmcblk0boot1: mmc0:0001 DG4064 4.00 MiB [ 2.755928] mmcblk0rpmb: mmc0:0001 DG4064 4.00 MiB, chardev (511:0) [ 2.907045] Found dev node: /dev/mmcblk0p1 [ 3.040446] usb 1-2.1: new low-speed USB device number 3 using tegra-xusb [ 3.181625] input: SEMICO USB Keyboard as /devices/platform/bus@0/3610000.usb/usb1/1-2/1-2.1/1-2.1:1.0/0003:1A2C:212A.0001/input/input1 [ 3.241211] hid-generic 0003:1A2C:212A.0001: input,hidraw0: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-3610000.usb-2.1/input0 [ 3.245059] input: SEMICO USB Keyboard Consumer Control as /devices/platform/bus@0/3610000.usb/usb1/1-2/1-2.1/1-2.1:1.1/0003:1A2C:212A.0002/input/input2 [ 3.304912] input: SEMICO USB Keyboard System Control as /devices/platform/bus@0/3610000.usb/usb1/1-2/1-2.1/1-2.1:1.1/0003:1A2C:212A.0002/input/input3 [ 3.305533] hid-generic 0003:1A2C:212A.0002: input,hidraw1: USB HID v1.10 Device [SEMICO USB Keyboard] on usb-3610000.usb-2.1/input1 [ 3.408689] usb 1-2.2: new low-speed USB device number 4 using tegra-xusb [ 3.546173] input: YSPRINGTECH USB OPTICAL MOUSE as /devices/platform/bus@0/3610000.usb/usb1/1-2/1-2.2/1-2.2:1.0/0003:10C4:0005.0003/input/input4 [ 3.546745] hid-generic 0003:10C4:0005.0003: input,hidraw2: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-3610000.usb-2.2/input0 [ 3.652651] usb 1-2.4: new high-speed USB device number 5 using tegra-xusb [ 3.784350] usb-storage 1-2.4:1.0: USB Mass Storage device detected [ 3.786222] scsi host0: usb-storage 1-2.4:1.0 [ 3.790184] EXT4-fs (mmcblk0p1): 8 orphan inodes deleted [ 3.790190] EXT4-fs (mmcblk0p1): recovery complete [ 3.797245] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 3.802817] Rootfs mounted over mmcblk0p1 [ 3.812116] Switching from initrd to actual rootfs [ 3.963860] systemd[1]: System time before build time, advancing clock. [ 4.031595] NET: Registered PF_INET6 protocol family [ 4.033396] Segment Routing with IPv6 [ 4.033405] In-situ OAM (IOAM) with IPv6 [ 4.077824] systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.078226] systemd[1]: Detected architecture arm64. [ 4.197243] systemd[1]: Hostname set to . [ 4.236631] systemd[1]: Using hardware watchdog 'NVIDIA Tegra186 WDT', version 0, device /dev/watchdog [ 4.236647] systemd[1]: Set hardware watchdog to 2min. [ 4.478644] systemd[1]: /lib/systemd/system/snapd.service:23: Unknown key name 'RestartMode' in section 'Service', ignoring. [ 4.488930] systemd[1]: /etc/systemd/system/nvs-service.service:41: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 4.493652] systemd[1]: /etc/systemd/system/nvargus-daemon.service:42: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 4.549368] systemd[1]: Queued start job for default target Graphical Interface. [ 4.551085] systemd[1]: Created slice Slice /system/modprobe. [ 4.622571] systemd[1]: Created slice Slice /system/serial-getty. [ 4.670554] systemd[1]: Created slice Slice /system/systemd-fsck. [ 4.765358] systemd[1]: Created slice User and Session Slice. [ 4.806783] scsi 0:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS [ 4.809421] sd 0:0:0:0: [sda] 60440576 512-byte logical blocks: (30.9 GB/28.8 GiB) [ 4.810925] sd 0:0:0:0: [sda] Write Protect is off [ 4.812232] sd 0:0:0:0: [sda] No Caching mode page found [ 4.812238] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.834184] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.844790] sda: sda1 [ 4.846124] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.867032] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.867205] systemd[1]: Reached target Slice Units. [ 4.867266] systemd[1]: Reached target Mounting snaps. [ 4.867313] systemd[1]: Reached target Mounted snaps. [ 4.867368] systemd[1]: Reached target Swaps. [ 4.867427] systemd[1]: Reached target Local Verity Protected Volumes. [ 4.867600] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 4.867834] systemd[1]: Listening on LVM2 poll daemon socket. [ 4.875137] systemd[1]: Listening on RPCbind Server Activation Socket. [ 4.918834] systemd[1]: Listening on Syslog Socket. [ 4.930728] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.930893] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 4.931258] systemd[1]: Listening on Journal Audit Socket. [ 4.931455] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.931689] systemd[1]: Listening on Journal Socket. [ 4.932024] systemd[1]: Listening on udev Control Socket. [ 4.932191] systemd[1]: Listening on udev Kernel Socket. [ 4.933570] systemd[1]: Mounting Huge Pages File System... [ 4.982422] systemd[1]: Mounting POSIX Message Queue File System... [ 4.983733] systemd[1]: Mounting Kernel Debug File System... [ 4.985370] systemd[1]: Mounting Kernel Trace File System... [ 5.006665] systemd[1]: Starting Journal Service... [ 5.006969] systemd[1]: Finished Availability of block devices. [ 5.008560] systemd[1]: Starting Set the console keyboard layout... [ 5.027866] systemd[1]: Starting Create List of Static Device Nodes... [ 5.029417] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 5.047846] systemd[1]: Starting Load Kernel Module configfs... [ 5.049782] systemd[1]: Starting Load Kernel Module drm... [ 5.061809] systemd[1]: Starting Load Kernel Module efi_pstore... [ 5.063157] systemd[1]: Starting Load Kernel Module fuse... [ 5.064591] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 5.085490] systemd[1]: Started Nameserver information manager. [ 5.085718] systemd[1]: Reached target Preparation for Network. [ 5.085955] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 5.088831] systemd[1]: Starting Load Kernel Modules... [ 5.093049] fuse: init (API version 7.34) [ 5.100065] nvsciipc: loading out-of-tree module taints kernel. [ 5.101262] nvsciipc: loaded module [ 5.118742] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 5.119343] nvmap_co_device_init: vpr :dma coherent mem declare 0x0000001049800000,914358272 [ 5.119350] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 5.119362] nvmap_page_pool_init: Total RAM pages: 16087599 [ 5.119363] nvmap_page_pool_init: nvmap page pool size: 2010949 pages (3759 MB) [ 5.119435] nvmap_background_zero_thread: PP zeroing thread starting. [ 5.119459] nvmap_heap_create: created heap vpr base 0x0000001049800000 size (892928KiB) [ 5.119493] nvmap_heap_create: fsi :dma coherent mem declare 0x000000102f000000,16777216 [ 5.119495] nvmap_heap_create: created heap fsi base 0x000000102f000000 size (16384KiB) [ 5.128198] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.138065] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null). Quota mode: none. [ 5.139075] tegra-host1x 13e00000.host1x: Adding to iommu group 5 [ 5.140389] host1x-context host1x-ctx.0: Adding to iommu group 6 [ 5.140711] host1x-context host1x-ctx.1: Adding to iommu group 7 [ 5.141065] host1x-context host1x-ctx.2: Adding to iommu group 8 [ 5.141328] host1x-context host1x-ctx.3: Adding to iommu group 9 [ 5.141620] host1x-context host1x-ctx.4: Adding to iommu group 10 [ 5.141835] host1x-context host1x-ctx.5: Adding to iommu group 11 [ 5.142072] host1x-context host1x-ctx.6: Adding to iommu group 12 [ 5.142348] host1x-context host1x-ctx.7: Adding to iommu group 13 [ 5.142597] host1x-context host1x-ctx.8: Adding to iommu group 14 [ 5.142801] host1x-context host1x-ctx.9: Adding to iommu group 15 [ 5.143005] host1x-context host1x-ctx.10: Adding to iommu group 16 [ 5.143202] host1x-context host1x-ctx.11: Adding to iommu group 17 [ 5.143399] host1x-context host1x-ctx.12: Adding to iommu group 18 [ 5.143628] host1x-context host1x-ctx.13: Adding to iommu group 19 [ 5.143836] host1x-context host1x-ctx.14: Adding to iommu group 20 [ 5.144033] host1x-context host1x-ctx.15: Adding to iommu group 21 [ 5.168415] systemd[1]: Starting Coldplug All udev Devices... [ 5.235143] systemd[1]: Started Journal Service. [ 5.311641] nvgpu: 17000000.gpu nvgpu_nvhost_syncpt_init:122 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 5.311641] [ 5.366190] systemd-journald[369]: Received client request to flush runtime journal. ▒▒TCU debug prints will be routed to traces. ▒▒[ 5.728649] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: ivc channel driver missing [ 5.728652] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: ivc channel driver missing [ 5.728655] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: ivc channel driver missing [ 5.728655] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.728658] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivc channel driver missing [ 5.728659] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.728661] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivc channel driver missing [ 5.728663] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: ivc channel driver missing [ 5.728670] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.728677] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.728683] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.728686] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.728691] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.728693] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.728695] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.728707] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.728710] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.814108] (NULL device *): fops function table already registered [ 6.371986] ucsi_ccg 1-0008: i2c_transfer failed -121 [ 6.371993] ucsi_ccg 1-0008: ucsi_ccg_init failed - -121 [ 6.371999] ucsi_ccg: probe of 1-0008 failed with error -121 ▒▒Starting RmBootstrap Registered event_type:[0] for dce_core_ipc_type:[1] Registered event_type:[1] for dce_core_ipc_type:[3] dce_ipc State Initialized RmBootstrap completed successfully ▒▒[ 8.442692] rt5640 8-001c: Device with ID register 0xffff0000 is not rt5640/39 [ 9.231537] using random self ethernet address [ 9.231546] using random host ethernet address [ 9.500198] using random self ethernet address [ 9.500207] using random host ethernet address [ 9.900970] nvethernet 6800000.ethernet: failed to connect PHY [ 9.900985] net eno1: ether_open: Cannot attach to PHY (error: -19) [ 10.584058] tegra194-pcie 141a0000.pcie: supply vddio-pex-ctl not found, using dummy regulator [ 12.876381] tegra194-pcie 141e0000.pcie: supply vddio-pex-ctl not found, using dummy regulator Ubuntu 22.04.5 LTS ma-desktop ttyTCU0 ma-desktop login: [ 17.120660] [drm:nv_drm_atomic_commit [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00020000] Flip event timeout on head 0 [ 21.567964] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. ma-desktop login: ma-desktop login: ▒▒