ÿâ [0000.061] I> MB1 (version: 0.32.0.0-t234-54845784-57325615) [0000.066] I> t234-A01-1-Silicon (0x12347) Prod [0000.070] I> Boot-mode : Coldboot [0000.074] I> Emulation: [0000.076] I> Entry timestamp: 0x00000000 [0000.080] I> last_boot_error: 0x0 [0000.083] I> BR-BCT: preprod_dev_sign: 0 [0000.087] I> rst_source: 0x0, rst_level: 0x0 [0000.091] I> Task: Bootchain select WAR set (0x5000ba65) [0000.096] I> Task: Enable SLCG (0x5000bab1) [0000.100] I> Task: CRC check (0x5001ea19) [0000.104] I> Task: Initialize MB2 params (0x5000cb51) [0000.109] I> MB2-params @ 0x40060000 [0000.113] I> Task: Crypto init (0x5001d981) [0000.117] I> Task: Secure debug controls (0x5000c0a9) [0000.122] I> Task: strap war set (0x5000ba2d) [0000.126] I> Task: Initialize SOC Therm (0x5001bd35) [0000.131] I> Task: Program NV master stream id (0x5000c05d) [0000.136] I> Task: Verify boot mode (0xd4820f1) [0000.142] I> Task: Alias fuses (0x5001095d) [0000.147] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.154] I> Task: Print SKU type (0x5000f5f1) [0000.158] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c8 [0000.163] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0000.168] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0000.172] I> FUSE_OPT_DLA_DISABLE = 0x00000003 [0000.176] I> FUSE_OPT_PVA_DISABLE = 0x00000001 [0000.181] I> FUSE_OPT_NVENC_DISABLE = 0x00000001 [0000.185] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0000.189] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0000.194] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0000.198] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.202] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.206] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.210] I> FUSE_SKU_INFO_0 = 0xd5 [0000.214] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.218] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.221] I> SKU: Prod [0000.224] I> Task: Boost clocks (0x500148a1) [0000.228] I> Initializing PLLC2 for AXI_CBB. [0000.232] I> AXI_CBB : src = 35, divisor = 0 [0000.236] I> Task: Voltage monitor (0x50014b49) [0000.240] I> VMON: Vmon re-calibration and fine tuning done [0000.246] I> Task: UPHY init (0x5000d065) [0000.252] I> HSIO UPHY init done [0000.255] E> Skipping GBE UPHY config [0000.258] I> Task: Boot device init (0x50000be9) [0000.263] I> Boot_device: QSPI_FLASH instance: 0 [0000.267] I> Qspi clock source : pllc_out0 [0000.271] I> QSPI Flash: Macronix 64MB [0000.275] I> QSPI-0l initialized successfully [0000.279] I> Task: TSC init (0x50020a4d) [0000.283] I> Task: Load membct (0x50011fe9) [0000.287] I> RAM_CODE 0x4000421 [0000.290] I> Loading MEMBCT [0000.293] I> Slot: 0 [0000.295] I> Binary[0] block-0 (partition size: 0x40000) [0000.300] I> get_binary_info: Binary name: MEM-BCT-0 [0000.305] I> Size of crypto header is 8192 [0000.309] I> BCH load address is : 0x40050000 [0000.313] I> Size of crypto header is 8192 [0000.317] I> BCH of MEM-BCT-0 read from storage [0000.322] I> BCH address is : 0x40050000 [0000.326] I> MEM-BCT-0 header integrity check is success [0000.331] I> Binary magic in BCH component 0 is MEM0 [0000.336] I> component binary type is 0 [0000.340] I> MEM-BCT-0 binary is read from storage [0000.345] I> MEM-BCT-0 binary integrity check is success [0000.350] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.357] I> RAM_CODE 0x4000421 [0000.362] I> RAM_CODE 0x4000421 [0000.366] I> Task: Load Page retirement list (0x500115b1) [0000.371] I> Task: SDRAM params override (0x50011fc5) [0000.376] I> Task: Save mem-bct info (0x50014fa1) [0000.381] I> Task: Carveout allocate (0x50015005) [0000.385] I> RCM blob carveout will not be allocated [0000.390] I> ECC region[0]: Start:0x0, End:0x0 [0000.394] I> ECC region[1]: Start:0x0, End:0x0 [0000.399] I> ECC region[2]: Start:0x0, End:0x0 [0000.403] I> ECC region[3]: Start:0x0, End:0x0 [0000.407] I> ECC region[4]: Start:0x0, End:0x0 [0000.411] I> Non-ECC region[0]: Start:0x80000000, End:0x280000000 [0000.417] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.422] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.427] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.431] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.441] I> allocated(CO:44) base:0x249800000 size:0x36800000 align: 0x100000 [0000.448] I> allocated(CO:31) base:0x240000000 size:0x8000000 align: 0x8000000 [0000.455] I> allocated(CO:43) base:0x23c000000 size:0x4000000 align: 0x200000 [0000.462] I> allocated(CO:20) base:0x23a000000 size:0x2000000 align: 0x2000000 [0000.469] I> allocated(CO:24) base:0x238000000 size:0x2000000 align: 0x2000000 [0000.476] I> allocated(CO:28) base:0x236000000 size:0x2000000 align: 0x2000000 [0000.483] I> allocated(CO:22) base:0x248000000 size:0x1000000 align: 0x1000000 [0000.490] I> allocated(CO:35) base:0x235200000 size:0xe00000 align: 0x10000 [0000.497] I> allocated(CO:02) base:0x249000000 size:0x800000 align: 0x800000 [0000.504] I> allocated(CO:03) base:0x234800000 size:0x800000 align: 0x800000 [0000.511] I> allocated(CO:06) base:0x234000000 size:0x800000 align: 0x800000 [0000.518] I> allocated(CO:10) base:0x233800000 size:0x800000 align: 0x800000 [0000.525] I> allocated(CO:56) base:0x233000000 size:0x800000 align: 0x200000 [0000.532] I> allocated(CO:07) base:0x232c00000 size:0x400000 align: 0x400000 [0000.539] I> allocated(CO:33) base:0x232800000 size:0x400000 align: 0x200000 [0000.546] I> allocated(CO:23) base:0x235000000 size:0x200000 align: 0x200000 [0000.553] I> allocated(CO:01) base:0x232700000 size:0x100000 align: 0x100000 [0000.560] I> allocated(CO:04) base:0x232600000 size:0x100000 align: 0x100000 [0000.567] I> allocated(CO:05) base:0x232500000 size:0x100000 align: 0x100000 [0000.573] I> allocated(CO:08) base:0x232400000 size:0x100000 align: 0x100000 [0000.580] I> allocated(CO:09) base:0x232300000 size:0x100000 align: 0x100000 [0000.587] I> allocated(CO:15) base:0x232200000 size:0x100000 align: 0x100000 [0000.594] I> allocated(CO:17) base:0x232100000 size:0x100000 align: 0x100000 [0000.601] I> allocated(CO:27) base:0x232000000 size:0x100000 align: 0x100000 [0000.608] I> allocated(CO:42) base:0x231f00000 size:0x100000 align: 0x100000 [0000.615] I> allocated(CO:54) base:0x231e80000 size:0x80000 align: 0x80000 [0000.622] I> allocated(CO:34) base:0x231e70000 size:0x10000 align: 0x10000 [0000.628] I> allocated(CO:47) base:0x231a00000 size:0x400000 align: 0x200000 [0000.635] I> allocated(CO:72) base:0x231800000 size:0x200000 align: 0x10000 [0000.642] I> allocated(CO:48) base:0x231e50000 size:0x20000 align: 0x10000 [0000.649] I> allocated(CO:69) base:0x231e30000 size:0x20000 align: 0x10000 [0000.656] I> allocated(CO:49) base:0x231e20000 size:0x10000 align: 0x10000 [0000.662] I> allocated(CO:50) base:0x231e10000 size:0x10000 align: 0x10000 [0000.669] I> NSDRAM base: 0x80000000, end: 0x231e70000 [0000.674] I> Task: Thermal check (0x50021d55) [0000.678] I> max_chip_limit = 105 [0000.682] I> min_chip_limit = -28 [0000.685] I> max temp read = 38 [0000.688] I> min temp read = 37 [0000.691] I> Task: Update FSI SCR with thermal fuse data (0x50021e61) [0000.697] I> Task: Enable WDT 5th expiry (0x50021a41) [0000.702] I> Task: I2C register (0x50000b85) [0000.706] I> Task: Reset FSI (0x500148b1) [0000.710] I> Task: Pinmux init (0x5001397d) [0000.714] I> skipped mmio_addr = 0x9240008 [0000.718] I> skipped mmio_addr = 0x9240000 [0000.722] I> skipped mmio_addr = 0x9240010 [0000.726] I> skipped mmio_addr = 0x9240018 [0000.730] I> skipped mmio_addr = 0x9240020 [0000.734] I> skipped mmio_addr = 0x9240030 [0000.738] I> skipped mmio_addr = 0x9240028 [0000.742] I> skipped mmio_addr = 0x9240038 [0000.746] I> skipped mmio_addr = 0x9240040 [0000.749] I> skipped mmio_addr = 0x9240048 [0000.753] I> skipped mmio_addr = 0x9241000 [0000.757] I> skipped mmio_addr = 0x9241008 [0000.761] I> skipped mmio_addr = 0x9241010 [0000.765] I> skipped mmio_addr = 0x9241018 [0000.769] I> skipped mmio_addr = 0x9241020 [0000.773] I> skipped mmio_addr = 0x9241028 [0000.777] I> skipped mmio_addr = 0x9241030 [0000.781] I> skipped mmio_addr = 0x9241038 [0000.785] I> skipped mmio_addr = 0x9241040 [0000.789] I> skipped mmio_addr = 0x9242000 [0000.793] I> skipped mmio_addr = 0x9242008 [0000.797] I> Task: Prod config init (0x50013ddd) [0000.801] I> Task: Pad voltage init (0x50013a2d) [0000.806] I> Task: Prod init (0x50013e21) [0000.810] I> Task: Common rail init (0x50014575) [0000.814] I> DONE: Thermal config [0000.818] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.827] I> DONE: SOC rail config [0000.830] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.837] I> DONE: MEMIO rail config [0000.840] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT. [0000.847] I> DONE: GPU rail info [0000.850] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT. [0000.856] I> DONE: CV rail info [0000.859] I> Task: Mem clock src (0x50011de9) [0000.863] I> Task: Misc. board config (0x5001461d) [0000.868] W> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.874] I> Task: SDRAM init (0x50011ded) [0000.878] I> SDRAM-params @ 0xd485000 [0000.882] I> MemoryType: 4 MemBctRevision: 1 [0000.888] I> MSS code-drop: NvBootSdramInit [0000.892] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0000.900] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0000.907] I> MSS CAR: Init PLLM [0000.910] I> MSS CAR: Init PLLHUB [0000.915] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.926] I> mb1_sdram_init Done ! [0000.929] I> SDRAM Size in Total 0x200000000 [0000.934] I> Task: Dram Ecc scrub (0x500116f5) [0000.938] I> Task: DRAM alias check (0x50011fbd) [0000.949] I> Task: Program NSDRAM carveout (0x50015961) [0000.956] I> NSDRAM carveout encryption is enabled [0000.961] I> Program NSDRAM carveout [0000.965] I> Task: Register checker (0x50011fc1) [0000.972] I> Task: Enable clock-mon (0x50020a35) [0000.978] I> FMON: Fmon re-programming done [0000.983] I> Task: Mapper init (0x5001ef4d) [0000.988] I> Task: SC7 Context Init (0x50020d3d) [0000.994] I> Task: CCPLEX IST init (0x5000c925) [0000.999] I> Task: CPU WP0 (0x5000bb15) [0001.005] I> Loading MCE [0001.007] I> Slot: 0 [0001.010] I> Binary[8] block-0 (partition size: 0x80000) [0001.016] I> get_binary_info: Binary name: MCE [0001.020] I> Size of crypto header is 8192 [0001.025] I> BCH load address is : 0x4003e000 [0001.030] I> Size of crypto header is 8192 [0001.035] I> BCH of MCE read from storage [0001.039] I> BCH address is : 0x4003e000 [0001.045] I> MCE header integrity check is success [0001.050] I> Binary magic in BCH component 0 is MTSM [0001.055] I> component binary type is 8 [0001.059] I> Size of crypto header is 8192 [0001.066] I> MCE binary is read from storage [0001.071] I> MCE binary integrity check is success [0001.076] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0001.084] I> Size of crypto header is 8192 [0001.098] I> Size of crypto header is 8192 [0001.103] I> Sending WP0 mailbox command to PSC [0001.113] I> Task: XUSB Powergate (0x50000b91) [0001.118] I> Skipping powergate XUSB. [0001.122] I> Task: MB1 fixed firewalls (0x5002006d) [0001.134] W> Firewall readback mismatch [0001.138] W> Firewall readback mismatch [0001.146] W> Firewall readback mismatch [0001.156] I> Task: Load bpmp-fw (0x500203c9) [0001.162] I> Slot: 0 [0001.164] I> Binary[15] block-0 (partition size: 0x180000) [0001.170] I> get_binary_info: Binary name: BPMP_FW [0001.175] I> Size of crypto header is 8192 [0001.180] I> BCH load address is : 0x807fe000 [0001.185] I> Size of crypto header is 8192 [0001.190] I> BCH of BPMP_FW read from storage [0001.195] I> BCH address is : 0x807fe000 [0001.200] I> BPMP_FW header integrity check is success [0001.205] I> Binary magic in BCH component 0 is BPMF [0001.211] I> component binary type is 15 [0001.215] I> Size of crypto header is 8192 [0001.230] I> BPMP_FW binary is read from storage [0001.238] I> BPMP_FW binary integrity check is success [0001.243] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfdd80) [0001.251] I> Slot: 0 [0001.253] I> Binary[16] block-10000 (partition size: 0x400000) [0001.260] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.266] I> Size of crypto header is 8192 [0001.270] I> BCH load address is : 0x807fc000 [0001.276] I> Size of crypto header is 8192 [0001.280] I> BCH of BPMP_FW_DTB read from storage [0001.285] I> BCH address is : 0x807fc000 [0001.291] I> BPMP_FW_DTB header integrity check is success [0001.296] I> Binary magic in BCH component 0 is BPMD [0001.302] I> component binary type is 16 [0001.306] I> Size of crypto header is 8192 [0001.312] I> BPMP_FW_DTB binary is read from storage [0001.318] I> BPMP_FW_DTB binary integrity check is success [0001.324] I> Binary BPMP_FW_DTB loaded successfully at 0x807e31f0 (0x18e00) [0001.332] I> Task: Load psc-fw (0x50020551) [0001.338] I> Slot: 0 [0001.340] I> Binary[17] block-0 (partition size: 0xc0000) [0001.346] I> get_binary_info: Binary name: PSC_FW [0001.351] I> Size of crypto header is 8192 [0001.356] I> BCH load address is : 0x80ffe000 [0001.361] I> Size of crypto header is 8192 [0001.366] I> BCH of PSC_FW read from storage [0001.371] I> BCH address is : 0x80ffe000 [0001.376] I> PSC_FW header integrity check is success [0001.381] I> Binary magic in BCH component 0 is PFWP [0001.387] I> component binary type is 17 [0001.391] I> Size of crypto header is 8192 [0001.399] I> PSC_FW binary is read from storage [0001.405] I> PSC_FW binary integrity check is success [0001.411] I> Binary PSC_FW loaded successfully at 0x80000000 (0x59980) [0001.419] I> Task: Load nvdec-fw (0x500205c5) [0001.424] I> Slot: 0 [0001.427] I> Binary[7] block-0 (partition size: 0x100000) [0001.433] I> get_binary_info: Binary name: NVDEC [0001.438] I> Size of crypto header is 8192 [0001.442] I> BCH load address is : 0x800fe000 [0001.448] I> Size of crypto header is 8192 [0001.452] I> BCH of NVDEC read from storage [0001.457] I> BCH address is : 0x800fe000 [0001.462] I> NVDEC header integrity check is success [0001.467] I> Binary magic in BCH component 0 is NDEC [0001.473] I> component binary type is 7 [0001.477] I> Size of crypto header is 8192 [0001.485] I> NVDEC binary is read from storage [0001.490] I> NVDEC binary integrity check is success [0001.495] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0001.503] I> Size of crypto header is 8192 [0001.521] I> Task: Load tsec-fw (0x5002097d) [0001.526] I> TSEC-FW load support not enabled [0001.531] I> Task: GPIO interrupt map (0x500147b5) [0001.537] I> Task: SC7 context save (0x50020d79) [0001.543] I> Slot: 0 [0001.545] I> Binary[27] block-0 (partition size: 0x100000) [0001.551] I> get_binary_info: Binary name: BR_BCT [0001.556] I> Size of crypto header is 8192 [0001.561] I> Size of crypto header is 8192 [0001.566] I> BR_BCT binary is read from storage [0001.571] I> BR_BCT binary integrity check is success [0001.577] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.584] I> Slot: 0 [0001.587] I> Binary[13] block-0 (partition size: 0x30000) [0001.593] I> get_binary_info: Binary name: SC7-FW [0001.598] I> Size of crypto header is 8192 [0001.602] I> Size of crypto header is 8192 [0001.607] I> BCH load address is : 0xa0002000 [0001.612] I> Size of crypto header is 8192 [0001.617] I> BCH of SC7-FW read from storage [0001.621] I> BCH address is : 0xa0002000 [0001.627] I> SC7-FW header integrity check is success [0001.632] I> Binary magic in BCH component 0 is WB0B [0001.637] I> component binary type is 13 [0001.642] I> Size of crypto header is 8192 [0001.648] I> SC7-FW binary is read from storage [0001.654] I> SC7-FW binary integrity check is success [0001.659] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x26db0) [0001.667] I> Slot: 0 [0001.669] I> Binary[22] block-0 (partition size: 0x30000) [0001.675] I> get_binary_info: Binary name: PSC_RF [0001.680] I> Size of crypto header is 8192 [0001.685] I> Size of crypto header is 8192 [0001.689] I> BCH load address is : 0xa002adb0 [0001.695] I> Size of crypto header is 8192 [0001.700] I> BCH of PSC_RF read from storage [0001.704] I> BCH address is : 0xa002adb0 [0001.709] I> PSC_RF header integrity check is success [0001.715] I> Binary magic in BCH component 0 is PSCR [0001.720] I> component binary type is 22 [0001.724] I> Size of crypto header is 8192 [0001.730] I> PSC_RF binary is read from storage [0001.736] I> PSC_RF binary integrity check is success [0001.741] I> Binary PSC_RF loaded successfully at 0xa002cdb0 (0x1b140) [0001.764] I> Task: Save WP0 payload to SC7 ctx (0x50021725) [0001.771] I> Task: Load MB2rf binary to SC7 ctx (0x500216b9) [0001.777] I> Slot: 0 [0001.780] I> Binary[14] block-0 (partition size: 0x20000) [0001.786] I> get_binary_info: Binary name: MB2_RF [0001.791] I> Size of crypto header is 8192 [0001.795] I> Size of crypto header is 8192 [0001.800] I> BCH load address is : 0xa00d6a48 [0001.805] I> Size of crypto header is 8192 [0001.810] I> BCH of MB2_RF read from storage [0001.815] I> BCH address is : 0xa00d6a48 [0001.820] I> MB2_RF header integrity check is success [0001.825] I> Binary magic in BCH component 0 is MB2R [0001.831] I> component binary type is 14 [0001.835] I> Size of crypto header is 8192 [0001.841] I> MB2_RF binary is read from storage [0001.846] I> MB2_RF binary integrity check is success [0001.852] I> Binary MB2_RF loaded successfully at 0xa00d8a48 (0x1bfa0) [0001.859] I> Task: Save Fuse-Bypass data to SC7 ctx (0x50021621) [0001.867] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.874] I> SC7 context fuse-bypass data is empty [0001.880] I> Task: Save PMIC data to SC7 ctx (0x5002144d) [0001.886] I> Task: Save I2C bus freq data to SC7 ctx (0x500213d9) [0001.893] I> Task: Save SOCTherm data to SC7 ctx (0x50021365) [0001.900] I> Task: Save FMON data to SC7 ctx (0x500212f1) [0001.906] I> Task: Save VMON data to SC7 ctx (0x50021279) [0001.913] I> Task: Save TZDRAM data to SC7 ctx (0x5002178d) [0001.919] I> Task: Save GPIO int data to SC7 ctx (0x50021561) [0001.926] I> Task: Save clock data to SC7 ctx (0x50021205) [0001.933] I> Task: Save debug data to SC7 ctx (0x50021191) [0001.943] I> SC7 context save done [0001.947] I> Task: Load MB2/Applet/FSKP (0x5000ca55) [0001.953] I> Loading MB2 [0001.956] I> Slot: 0 [0001.959] I> Binary[6] block-0 (partition size: 0x80000) [0001.965] I> get_binary_info: Binary name: MB2 [0001.970] I> Size of crypto header is 8192 [0001.974] I> BCH load address is : 0x8007e000 [0001.979] I> Size of crypto header is 8192 [0001.984] I> BCH of MB2 read from storage [0001.989] I> BCH address is : 0x8007e000 [0001.994] I> MB2 header integrity check is success [0001.999] I> Binary magic in BCH component 0 is MB2B [0002.004] I> component binary type is 6 [0002.008] I> Size of crypto header is 8192 [0002.018] I> MB2 binary is read from storage [0002.023] I> MB2 binary integrity check is success [0002.028] I> Binary MB2 loaded successfully at 0x80000000 (0x68ee0) [0002.036] I> Task: Map CCPLEX SHARED carveout (0x5000cbf9) [0002.043] I> Task: Prepare MB2 params (0x5000cca9) [0002.050] I> BR-BCT Boot Chain Fields [0002.054] I> u32_non_gpio_select_boot_chain : 0 [0002.059] I> u32_num_boot_chains : 2 [0002.064] I> bf_bl_gpio_select_boot_chain_1b : 0 [0002.070] I> Task: Dram ecc test (0x50011791) [0002.075] I> Task: Misc NV security settings (0x5000c529) [0002.081] I> NVDEC sticky bits programming done [0002.086] I> Successfully powergated NVDEC [0002.091] I> Task: Disable/Reload WDT (0x50021a99) [0002.096] I> Task: Program misc carveouts (0x50015381) [0002.103] I> Program IPC carveouts [0002.110] I> SLCG Global override status := 0x0 [0002.115] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-02a8384c) I> t234-A01-1-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x0020deec I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x233000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e80) I> Task: Enable hot-plug capability (0x50026bec) I> Task: PSC mailbox init (0x50016a7c) I> Task: Crypto init (0x500065a8) I> Task: Enable GP-SE clock (0x50001fe4) I> Task: DICE Identity init (0x50019e50) I> DICE is not enabled. I> Task: OEM SC7 context save init (0x50019550) I> Task: I2C register (0x50001e44) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e2c) I> Task: Program CBB PCIE AMAP regions (0x50019b64) I> Task: Boot device init (0x50001d74) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001d70) I> Found 57 partitions in QSPI_FLASH (instance 0) I> Task: Load and authenticate registered FWs (0x5001ce48) I> Task: Load AUXP FWs (0x5002678c) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x232400000 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x232100000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x23a000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9441408 bytes I> dce: plain binary integrity check is success I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x23a000000 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x232c00000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x232500000 I> Task: Carveout setup (0x5001f55c) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x50016950) I> Task: Enable FSI VMON (0x500164d8) I> Task: Validate FSI Therm readings (0x50016530) I> Task: Restore XUSB sec (0x50001d44) I> Task: Enable FSI SE clock (0x50016ed8) I> Task: Initialize SBSA UART CAR (0x50001f48) I> Task: Ratchet update (0x50027c88) W> OPTIN fuse not set, skip ratchet update I> Task: Initialize CPUBL Params (0x50017e0c) I> CPUBL-params @ 0x236000000 I> Task: Prepare eeprom data (0x50017bd8) I> Task: FSI padctl context save (0x500196e0) E> Skipping FSI padctl config save: fsi not enabled I> Task: Unpowergate APE (0x50017640) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: OEM firewalls (0x500238fc) I> OEM firewalls configured I> Task: Powergate APE (0x500177b4) I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings (0x50023d50) I> Task: Unhalt AUXPs (0x500269f4) I> Unhalting SPE.. I> Enabling combined UART ÿýÿàspe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 243b265b351d6bb9cc7b2e3acc5d90f8 spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler ÿá I> Task: Trigger mailbox for PSC-BL1 exit (0x50016afc) I> Sending opcode 0x4d420802 to psc ÿçINFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x248002000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: 8a33b23-73b589c-8a15f76-rel-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 ÿáI> Received ACK from psc I> TasÿçINFO: MONITOR: user task addr:0x248022000, blob offset:0x00020000 INFO: MONITOR: populated user images:13 INFO: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_init... INFO: enter idle task. ÿâ bpmp: socket 0 bpmp: base binary md5 is 1377b684fe55be78e1d7fc3e0f143b55 bpmp: combined binary md5 is f0fadc45ec6216cb5b0bcb3771407fc2 bpmp: firmware tag is f0fadc45ec6216cb5b0b-1377b684fe5 initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized tj_init initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator initialized avfs_clk_platform initialized powergate initialized dvs initialized clk_mach_config initialized pm initialized suspend initialized strap initialized mce_dbell ÿák: Start secure NOR provision (0x5001997c) I> Task: Load FSI keyblob (0x50016f20) I> Task: Unhalt AUXPs (0ÿâinitialized emc initialized emc_mrq ÿáx500269fc) I> SCE unhalt skippedÿâinitialized clk_cal initialized uphy_dt initialized uphy_mrq HSIO UPHY reset has been de-asserted 0x0 initialized uphy initialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ÿá I> Unhalting RCE I> RCE unhalÿâinitialized ÿå[ 2.578362] Camera-FW on t234-rce-safe started TCU early console enabled.ÿâclk_cal_late initialized noc_late initialized cvc initialized avfs_clk_machÿå ÿâ_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable pwm3 enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp clk_check_max_rates: pex1_c6_core rate 500000000 > max 250000000 clk_check_max_rates: pex2_c7_core rate 500000000 > max 250000000 clk_check_max_rates: pex2_c8_core rate 500000000 > max 250000000 clk_check_max_rates: pex2_c9_core rate 500000000 > max 250000000 clk_check_max_rates: pex2_c10_core rate 500000000 > max 250000000 clk_check_max_rates: pex0_c0_core rate 500000000 > max 250000000 clk_check_max_rates: pex0_c1_core rate 500000000 > max 250000000 clk_check_max_rates: pex0_c2_core rate 500000000 > max 250000000 clk_check_max_rates: pex0_c3_core rate 500000000 > max 250000000 clk_check_max_rates: pex0_c4_core rate 500000000 > max 250000000 clk_check_max_rates: pex1_c5_core rate 500000000 > max 250000000 initialized clk_mach_post initialized pg_post initialized regulator_post initialized profile initialized fuse_late initialized mrq initialized patrÿå[ 2.702246] Camera-FW on t234-rce-safe ready SHA1=0b67520f (crt 1.487 ms, ÿâol_scrubber initialized cactmon initialized extras_post bpmp: init completeÿåtotal boot 125.476 ms) ÿâ ÿát successful I> DCE unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x50017f04) I> Task: Load TOS (0x50018608) I> Task: Load and authenticate registered FWs (0x5001ce48) I> Partition name: A_cpu-bootloader I> Size of partition: 3670016 I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloader ÿè ÿáI> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os I> MB2-params @ 0x40060000 I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0x231a00000 I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x23fdfe000 I> Relocating OP-TEE dtb from: 0x23feff770 to 0x231e30000, size: 0x1976 I> [0] START: 0x80000000, SIZE: 0x1b1e70000 I> [1] START: 0x236000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x233000200 ÿèDCE: FW Boot Done ÿáI> EKB detected (length: 0x410) @ VA:0x233000200 I> Task: Prepare TOS params (0x50018580) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x231e30000 I> Task: OEM SC7 context save (0x500197dc) I> OEM sc7 context saved I> Task: Disable MSS perf stats (0x50026a88) I> Task: Program display sticky bits (0x50026a04) I> Task: Storage device deinit (0x50001eec) I> Task: SMMU external bypass disable (0x50016a60) I> Task: SMMU init (0x5001697c) I> Task: Program GICv3 registers (0x50026b28) I> Task: Audit firewall settings (0x50023b50) I> Task: Bootchain failure check (0x50002434) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished ÿäNOTICE: BL31: v2.6(release):6363e7382 NOTICE: BL31: Built : 10:08:23, Feb 21 2023 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Feb 21 18:24:01 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: WARNING: Test OEM keys are being used! I/TC: This is only for TZ-SE testing and should NOT be used for a shipping product! I/TC: Primary CPU switching to normal world boot ÿá Jetson UEFI firmware (version 3.0-32616947 built on 2023-02-21T18:13:46+00:00) [=3h Jetson UEFI firmware (version 3.0-32616947 built on 2023-02-21T18:13:46+00:00) ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ** WARNING: Test Key is used. ** ...... L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-6289-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Sun Mar 19 07:55:28 PDT 2023 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: NVIDIA Orin Nano Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x20b5bdf18 SMBIOS=0xffff0000 SMBIOS 3.0=0x20a510000 MEMATTR=0x20ac5b018 ESRT=0x20ac8e418 RNG=0x22dd3dd18 MEMRESERVE=0x20ac5df18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000020ac8e418 to 0x000000020ac8e450. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000021dc00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000237ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000207e7bfff] [ 0.000000] node 0: [mem 0x0000000207e7c000-0x000000020a1bffff] [ 0.000000] node 0: [mem 0x000000020a1c0000-0x000000020a4fffff] [ 0.000000] node 0: [mem 0x000000020a500000-0x000000020a51ffff] [ 0.000000] node 0: [mem 0x000000020a520000-0x000000020a76ffff] [ 0.000000] node 0: [mem 0x000000020a770000-0x000000020a7bffff] [ 0.000000] node 0: [mem 0x000000020a7c0000-0x000000020a8affff] [ 0.000000] node 0: [mem 0x000000020a8b0000-0x000000020a8fffff] [ 0.000000] node 0: [mem 0x000000020a900000-0x000000020aa7ffff] [ 0.000000] node 0: [mem 0x000000020aa80000-0x000000020abbffff] [ 0.000000] node 0: [mem 0x000000020abc0000-0x000000020abeffff] [ 0.000000] node 0: [mem 0x000000020abf0000-0x000000020ac1ffff] [ 0.000000] node 0: [mem 0x000000020ac20000-0x000000020ac5ffff] [ 0.000000] node 0: [mem 0x000000020ac60000-0x000000020ac7ffff] [ 0.000000] node 0: [mem 0x000000020ac80000-0x000000020ac8ffff] [ 0.000000] node 0: [mem 0x000000020ac90000-0x000000020af0ffff] [ 0.000000] node 0: [mem 0x000000020af10000-0x000000020af3ffff] [ 0.000000] node 0: [mem 0x000000020af40000-0x000000020b02ffff] [ 0.000000] node 0: [mem 0x000000020b030000-0x000000020b03ffff] [ 0.000000] node 0: [mem 0x000000020b040000-0x000000020b08ffff] [ 0.000000] node 0: [mem 0x000000020b090000-0x000000020b58ffff] [ 0.000000] node 0: [mem 0x000000020b590000-0x000000020b59ffff] [ 0.000000] node 0: [mem 0x000000020b5a0000-0x000000020b6affff] [ 0.000000] node 0: [mem 0x000000020b6b0000-0x000000020b74ffff] [ 0.000000] node 0: [mem 0x000000020b750000-0x000000020b84ffff] [ 0.000000] node 0: [mem 0x000000020b850000-0x000000020b8effff] [ 0.000000] node 0: [mem 0x000000020b8f0000-0x000000020b9effff] [ 0.000000] node 0: [mem 0x000000020b9f0000-0x000000020ba8ffff] [ 0.000000] node 0: [mem 0x000000020ba90000-0x000000020c35ffff] [ 0.000000] node 0: [mem 0x000000020c360000-0x000000020c53ffff] [ 0.000000] node 0: [mem 0x000000020c540000-0x000000022dceffff] [ 0.000000] node 0: [mem 0x000000022dcf0000-0x000000022dd3ffff] [ 0.000000] node 0: [mem 0x000000022dd40000-0x00000002317fffff] [ 0.000000] node 0: [mem 0x0000000231a00000-0x0000000231e0ffff] [ 0.000000] node 0: [mem 0x0000000236000000-0x0000000237ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000237ffffff] [ 0.000000] On node 0, zone Normal: 496 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1756688 [ 0.000000] Kernel command line: root=/dev/mmcblk1p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 6360908K/7139392K available (18496K kernel code, 3168K rwdata, 7172K rodata, 3968K init, 1418K bss, 516340K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000637] Console: colour dummy device 80x25 [ 0.000676] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000683] pid_max: default: 32768 minimum: 301 [ 0.000740] LSM: Security Framework initializing [ 0.000762] Yama: becoming mindful. [ 0.000779] SELinux: Initializing. [ 0.000837] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000851] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001568] /cpus/cpu-map/cluster1: empty cluster [ 0.001863] rcu: Hierarchical SRCU implementation. [ 0.001943] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.002325] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/p3768/kernel-dts/tegra234-p3767-0003-p3768-0000-a0.dts [ 0.002330] DTB Build time: Mar 19 2023 08:08:40 [ 0.003533] Tegra Revision: A01 SKU: 0xd5 CPU Process: 0 SoC Process: 0 [ 0.003688] Remapping and enabling EFI services. [ 0.004906] smp: Bringing up secondary CPUs ... [ 0.033589] Detected PIPT I-cache on CPU1 [ 0.033624] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.033656] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.062281] Detected PIPT I-cache on CPU2 [ 0.062290] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.062305] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.090893] Detected PIPT I-cache on CPU3 [ 0.090902] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.090916] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.121555] Detected PIPT I-cache on CPU4 [ 0.121577] GICv3: CPU4: found redistributor 10200 region 0:0x000000000f500000 [ 0.121606] CPU4: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.150295] Detected PIPT I-cache on CPU5 [ 0.150306] GICv3: CPU5: found redistributor 10300 region 0:0x000000000f520000 [ 0.150322] CPU5: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.150386] smp: Brought up 1 node, 6 CPUs [ 0.150400] SMP: Total of 6 processors activated. [ 0.150403] CPU features: detected: Privileged Access Never [ 0.150405] CPU features: detected: LSE atomic instructions [ 0.150407] CPU features: detected: User Access Override [ 0.150409] CPU features: detected: 32-bit EL0 Support [ 0.150411] CPU features: detected: Common not Private translations [ 0.150413] CPU features: detected: RAS Extension Support [ 0.150415] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.150417] CPU features: detected: CRC32 instructions [ 0.150419] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.188543] CPU: All CPU(s) started at EL2 [ 0.190266] devtmpfs: initialized [ 0.206947] Registered cp15_barrier emulation handler [ 0.206956] Registered setend emulation handler [ 0.206961] KASLR enabled [ 0.207110] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.207120] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.209077] pinctrl core: initialized pinctrl subsystem [ 0.209633] SMBIOS 3.0.0 present. [ 0.209643] DMI: Unknown NVIDIA Orin NX Developer Kit/NVIDIA Orin NX Developer Kit, BIOS 3.0-32616947 02/21/2023 [ 0.209931] NET: Registered protocol family 16 [ 0.210823] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.210889] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.210946] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.210973] audit: initializing netlink subsys (disabled) [ 0.211065] audit: type=2000 audit(0.208:1): state=initialized audit_enabled=0 res=1 [ 0.211249] thermal_sys: Registered thermal governor 'step_wise' [ 0.211252] thermal_sys: Registered thermal governor 'power_allocator' [ 0.211255] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.212122] cpuidle: using governor menu [ 0.212232] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.212306] ASID allocator initialised with 32768 entries [ 0.212399] Serial: AMBA PL011 UART driver [ 0.214259] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.214285] Tegra reboot handler registered. [ 0.236121] mc: mapped MMIO address: 0xffff8000107b0000 -> 0x2c10000 [ 0.236134] mc: mapped MMIO address: 0xffff8000107d0000 -> 0x2c20000 [ 0.236142] mc: mapped MMIO address: 0xffff8000107f0000 -> 0x2c30000 [ 0.236151] mc: mapped MMIO address: 0xffff800010810000 -> 0x2c40000 [ 0.236158] mc: mapped MMIO address: 0xffff800010830000 -> 0x2c50000 [ 0.236164] mc: mapped MMIO address: 0xffff800010850000 -> 0x2b80000 [ 0.236171] mc: mapped MMIO address: 0xffff800010870000 -> 0x2b90000 [ 0.236177] mc: mapped MMIO address: 0xffff800010890000 -> 0x2ba0000 [ 0.236183] mc: mapped MMIO address: 0xffff8000108b0000 -> 0x2bb0000 [ 0.236190] mc: mapped MMIO address: 0xffff8000108d0000 -> 0x1700000 [ 0.236196] mc: mapped MMIO address: 0xffff8000108f0000 -> 0x1710000 [ 0.236202] mc: mapped MMIO address: 0xffff800010910000 -> 0x1720000 [ 0.236208] mc: mapped MMIO address: 0xffff800010930000 -> 0x1730000 [ 0.236215] mc: mapped MMIO address: 0xffff800010950000 -> 0x1740000 [ 0.236221] mc: mapped MMIO address: 0xffff800010970000 -> 0x1750000 [ 0.236227] mc: mapped MMIO address: 0xffff800010990000 -> 0x1760000 [ 0.236233] mc: mapped MMIO address: 0xffff8000109b0000 -> 0x1770000 [ 0.236241] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.236261] mc-err: mcerr ops are set to t23x [ 0.236992] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 65, base_baud = 0) is a SBSA [ 1.389497] printk: console [ttyAMA0] enabled [ 1.398281] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.404989] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 1.411689] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.418387] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.426981] ACPI: Interpreter disabled. [ 1.431266] ddr-vddq: supplied by vdd-5v [ 1.435390] ddr-vdd2: supplied by vdd-5v [ 1.439438] vdd-AO-1v2: supplied by vdd-5v [ 1.443672] vdd-3v3: supplied by vdd-5v [ 1.447716] vdd-rtc: supplied by vdd-AO-1v2 [ 1.452019] vdd-0v95-uphy: supplied by vdd-AO-1v2 [ 1.456851] vdd-0v95-hdmi: supplied by vdd-AO-1v2 [ 1.461833] vdd-1v8: supplied by vdd-3v3-sys [ 1.466220] vdd-3v3-AO: supplied by vdd-5v-sys [ 1.470776] vdd-av10-hub: supplied by vdd-5v-sys [ 1.475521] vdd-vbus-a: supplied by vdd-5v-sys [ 1.480082] vdd-vbus-b: supplied by vdd-5v-sys [ 1.484652] vdd-3v3-dp: supplied by vdd-3v3-sys [ 1.489464] iommu: Default domain type: Translated [ 1.494374] eventlib_kernel: keventlib is initialized, test id: 0 [ 1.500663] SCSI subsystem initialized [ 1.504485] usbcore: registered new interface driver usbfs [ 1.509985] usbcore: registered new interface driver hub [ 1.515308] usbcore: registered new device driver usb [ 1.520579] mc: Linux media interface: v0.10 [ 1.524855] videodev: Linux video capture interface: v2.00 [ 1.530505] pps_core: LinuxPPS API ver. 1 registered [ 1.535468] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.544606] PTP clock support registered [ 1.548771] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 1.555929] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 1.563630] Registered efivars operations [ 1.567780] FPGA manager framework [ 1.571216] Advanced Linux Sound Architecture Driver Initialized. [ 1.577588] Bluetooth: Core ver 2.22 [ 1.581170] NET: Registered protocol family 31 [ 1.585614] Bluetooth: HCI device and connection manager initialized [ 1.591971] Bluetooth: HCI socket layer initialized [ 1.596846] Bluetooth: L2CAP socket layer initialized [ 1.601905] Bluetooth: SCO socket layer initialized [ 1.607302] camchar: rtcpu character device driver loaded [ 1.612930] clocksource: Switched to clocksource arch_sys_counter [ 1.823253] VFS: Disk quotas dquot_6.6.0 [ 1.827222] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.834266] pnp: PnP ACPI: disabled [ 1.839954] la/ptsa driver initialized. [ 1.843851] NET: Registered protocol family 2 [ 1.848339] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.857406] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.865953] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.873942] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.881934] TCP: Hash tables configured (established 65536 bind 65536) [ 1.888529] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.895337] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.902637] NET: Registered protocol family 1 [ 1.907207] RPC: Registered named UNIX socket transport module. [ 1.913139] RPC: Registered udp transport module. [ 1.917839] RPC: Registered tcp transport module. [ 1.922540] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.928987] PCI: CLS 0 bytes, default 64 [ 1.933014] Trying to unpack rootfs image as initramfs... [ 2.092424] Freeing initrd memory: 9120K [ 2.098558] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 2.106503] kvm [1]: IPA Size Limit: 48 bits [ 2.110792] kvm [1]: GICv3: no GICV resource entry [ 2.115583] kvm [1]: disabling GICv2 emulation [ 2.120045] kvm [1]: GIC system register CPU interface enabled [ 2.125940] kvm [1]: vgic interrupt IRQ9 [ 2.129970] kvm [1]: VHE mode initialized successfully [ 2.135798] Initialise system trusted keyrings [ 2.140325] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 2.149258] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.155415] NFS: Registering the id_resolver key type [ 2.160483] Key type id_resolver registered [ 2.164663] Key type id_legacy registered [ 2.168712] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.175423] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.182831] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.201574] NET: Registered protocol family 38 [ 2.206020] Key type asymmetric registered [ 2.210114] Asymmetric key parser 'x509' registered [ 2.215009] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 2.222465] io scheduler mq-deadline registered [ 2.226998] io scheduler kyber registered [ 2.235356] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 2.240957] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 2.246543] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 2.254929] tegra_dc_assign_hw_data: no matching compatible node [ 2.260938] tegradccommon module_init failed [ 2.265206] tegradc module_init failed [ 2.269229] EINJ: ACPI disabled. [ 2.274150] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 2.281043] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 2.286354] tegra-pmc: ### PMC reset level: L0 [ 2.290794] tegra-pmc: ### PMC reset status reg: 0x0 [ 2.297210] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.741711] random: fast init done [ 3.886076] printk: console [ttyTCU0] enabled [ 3.891169] arm-smmu 12000000.iommu: probing hardware configuration... [ 3.897876] arm-smmu 12000000.iommu: SMMUv2 with: [ 3.902701] arm-smmu 12000000.iommu: stage 1 translation [ 3.908241] arm-smmu 12000000.iommu: stage 2 translation [ 3.913777] arm-smmu 12000000.iommu: nested translation [ 3.919227] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 3.926634] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 3.935767] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 3.942469] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 3.949155] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 3.956696] arm-smmu 10000000.iommu: probing hardware configuration... [ 3.963400] arm-smmu 10000000.iommu: SMMUv2 with: [ 3.968219] arm-smmu 10000000.iommu: stage 1 translation [ 3.973755] arm-smmu 10000000.iommu: stage 2 translation [ 3.979294] arm-smmu 10000000.iommu: nested translation [ 3.984742] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 3.992148] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 4.001286] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 4.007983] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.014679] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.021851] arm-smmu 8000000.iommu: probing hardware configuration... [ 4.028463] arm-smmu 8000000.iommu: SMMUv2 with: [ 4.033199] arm-smmu 8000000.iommu: stage 1 translation [ 4.038646] arm-smmu 8000000.iommu: stage 2 translation [ 4.044093] arm-smmu 8000000.iommu: nested translation [ 4.049452] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 4.056769] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 4.065752] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 4.072357] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.078962] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.086245] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 4.096041] tegra_profiler: version: 1.151, samples/io: 51/30 [ 4.101996] tegra_profiler: auth: init [ 4.106144] nvsciipc: loaded module [ 4.111460] tun: Universal TUN/TAP device driver, 1.6 [ 4.117162] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 4.124574] hns3: Copyright (c) 2017 Huawei Corporation. [ 4.130043] e1000e: Intel(R) PRO/1000 Network Driver [ 4.135134] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.141218] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.146760] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.152648] PPP generic driver version 2.4.2 [ 4.157079] PPP BSD Compression module registered [ 4.161907] PPP Deflate Compression module registered [ 4.167099] PPP MPPE Compression module registered [ 4.172041] usbcore: registered new interface driver r8152 [ 4.177681] usbcore: registered new interface driver asix [ 4.183225] usbcore: registered new interface driver ax88179_178a [ 4.189498] usbcore: registered new interface driver cdc_ether [ 4.195494] usbcore: registered new interface driver net1080 [ 4.201326] usbcore: registered new interface driver cdc_subset [ 4.207410] usbcore: registered new interface driver zaurus [ 4.213133] usbcore: registered new interface driver cdc_ncm [ 4.218945] usbcore: registered new interface driver aqc111 [ 4.224802] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.231161] ohci-pci: OHCI PCI platform driver [ 4.235732] ohci-platform: OHCI generic platform driver [ 4.241443] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 4.247789] usbcore: registered new interface driver uas [ 4.253271] usbcore: registered new interface driver usb-storage [ 4.259585] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 4.265661] mousedev: PS/2 mouse device common for all mice [ 4.271414] usbcore: registered new interface driver xpad [ 4.278874] tegra_rtc c2a0000.rtc: registered as rtc1 [ 4.284347] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:32 UTC (32) [ 4.292567] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.298968] i2c /dev entries driver [ 4.302682] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 4.308479] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 4.314177] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 4.319856] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 4.325535] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 4.331210] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 4.336888] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 4.342573] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 4.352036] device-mapper: uevent: version 1.0.3 [ 4.356874] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 4.366600] sdhci: Secure Digital Host Controller Interface driver [ 4.372948] sdhci: Copyright(c) Pierre Ossman [ 4.377418] Synopsys Designware Multimedia Card Interface Driver [ 4.383666] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.389844] sdhci-tegra 3400000.sdhci: Adding to iommu group 3 [ 4.390070] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 4.403260] tegra-bpmp bpmp: firmware: f0fadc45ec6216cb5b0b-1377b684fe5 [ 4.411551] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 4.417186] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x82 [ 4.427060] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 4.432999] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful ÿâFailed to create /rm/vdd_cpu Failed to create /rm/vdd_cpu debugfs initialized ÿá[ 5.532158] hid: raw HID events driver (C) Jiri Kosina [ 5.537740] usbcore: registered new interface driver usbhid [ 5.543479] usbhid: USB HID core driver [ 5.547892] tegra-dce d800000.dce: Adding to iommu group 4 [ 5.554518] dce: dce_ipc_channel_init:319 Invalid Channel State [0x0] for ch_type [2] [ 5.563085] tegra234-aon c000000.aon: Adding to iommu group 5 [ 5.569728] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 5.578712] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [0]. Ignored... [ 5.578715] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 5.579514] c000000.aon:hsp: probed [ 5.587479] tegra234-aon c000000.aon: init done [ 5.587862] tegra23x-psc e860000.psc: Adding to iommu group 6 [ 5.596460] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 5.600500] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 5.604914] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x1] [ 5.610696] tegra23x-psc e860000.psc: init done [ 5.617594] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [1] ... [ 5.617595] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored... [ 5.617605] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored... [ 5.624258] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 7 [ 5.632958] dce: dce_admin_setup_clients_ipc:529 Get queue info failed for [2] [ 5.633084] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 5.638321] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 5.646029] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [3] ... [ 5.646031] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 5.646041] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 5.657274] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 5.663806] dce: dce_start_boot_flow:173 DCE_BOOT_DONE [ 5.670249] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 5.746839] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 5.758281] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 5.770193] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 5.782755] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 5.795577] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 5.807664] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (113) [ 5.814474] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 5.823091] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=0b67520f597ddc6db82218e87c6c6eb8979fd4bb [ 5.836737] t19x_cache tegra-cache: probed [ 5.841173] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 5.851573] optee: probing for conduit method. [ 5.856165] optee: revision 3.19 (3f29c61f) [ 5.856940] optee: dynamic shared memory is enabled [ 5.866401] optee: initialized driver [ 5.881708] nvpmodel: initialized successfully [ 5.886399] tegra_hv: get_hvd: not initialized yet [ 5.891345] user_ivc_mempool: hypervisor not present [ 5.897257] usbcore: registered new interface driver snd-usb-audio [ 5.904450] u32 classifier [ 5.907237] input device check on [ 5.911008] Actions configured [ 5.914655] Initializing XFRM netlink socket [ 5.919534] NET: Registered protocol family 10 [ 5.925554] Segment Routing with IPv6 [ 5.929368] NET: Registered protocol family 17 [ 5.933953] NET: Registered protocol family 15 [ 5.938579] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 5.952610] Bluetooth: RFCOMM socket layer initialized [ 5.957918] Bluetooth: RFCOMM ver 1.11 [ 5.961783] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.967863] Bluetooth: HIDP socket layer initialized [ 5.973671] 9pnet: Installing 9P2000 support [ 5.978120] Key type dns_resolver registered [ 5.983264] registered taskstats version 1 [ 5.987488] Loading compiled-in X.509 certificates [ 6.002946] Loaded X.509 cert 'Build time autogenerated kernel key: e63fb224cdc2a940ac382bb67b420fcb52cc4aee' [ 6.013570] tegra194-pcie 14100000.pcie: Adding to iommu group 8 [ 6.026633] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.033857] tegra194-pcie 14160000.pcie: Adding to iommu group 9 [ 6.046531] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 6.053526] tegra194-pcie 141e0000.pcie: Adding to iommu group 10 [ 6.065751] tegra194-pcie 141e0000.pcie: Using GICv2m MSI allocator [ 6.072577] tegra194-pcie 140a0000.pcie: Adding to iommu group 11 [ 6.084774] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 6.117487] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 12 [ 6.128215] host1x 13e40000.host1x: Adding to iommu group 13 [ 6.155845] host1x 13e40000.host1x: initialized [ 6.160903] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 14 [ 6.168952] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 6.181226] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 15 [ 6.189207] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 6.201492] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 16 [ 6.209485] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 6.221770] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 17 [ 6.229757] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.242016] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 18 [ 6.249980] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.262246] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 19 [ 6.270220] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.282477] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 20 [ 6.290446] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.302710] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 21 [ 6.310693] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.322976] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 22 [ 6.331005] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 6.343282] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 23 [ 6.351240] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 6.363487] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 24 [ 6.371490] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 6.383752] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 25 [ 6.391731] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 6.404001] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 26 [ 6.411973] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 6.424262] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 27 [ 6.432228] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 6.444494] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 28 [ 6.452480] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 6.464758] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 29 [ 6.472752] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 6.485073] falcon 15340000.vic: Adding to iommu group 30 [ 6.495969] falcon 15340000.vic: initialized [ 6.500730] falcon 15380000.nvjpg: Adding to iommu group 31 [ 6.509855] falcon 15380000.nvjpg: initialized [ 6.514578] falcon 15540000.nvjpg1: Adding to iommu group 32 [ 6.523737] falcon 15540000.nvjpg1: initialized [ 6.528544] falcon 154c0000.nvenc: Adding to iommu group 33 [ 6.539087] falcon 154c0000.nvenc: _opp_is_duplicate: duplicate OPPs detected. Existing: freq: 115200000, volt: 0, enabled: 1. New: freq: 115200000, volt: 0, enabled: 1 [ 6.555293] falcon 154c0000.nvenc: initialized [ 6.560006] falcon 15a50000.ofa: Adding to iommu group 34 [ 6.569191] falcon 15a50000.ofa: initialized [ 6.573745] nvdec 15480000.nvdec: Adding to iommu group 35 [ 6.585995] nvdec 15480000.nvdec: initialized [ 6.590630] tsec 15500000.tsec: Adding to iommu group 36 [ 6.601263] tsec 15500000.tsec: initialized [ 6.608591] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.626153] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.642059] gpio-397 (camera-control-output-low): hogged as output/low [ 6.648812] gpio-486 (camera-control-output-low): hogged as output/low [ 6.656627] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 6.664036] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 6.671023] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.677531] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 6.684041] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.692558] tegra194-isp5 14800000.isp: Adding to iommu group 37 [ 6.700853] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.710522] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 6.716985] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.726214] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 6.735580] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 38 [ 6.743646] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 39 [ 6.751617] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 6.761575] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 6.768389] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 6.778347] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 6.785152] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.795094] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 6.801935] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 40 [ 6.810563] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000) [ 6.821971] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 41 [ 6.830581] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000) [ 6.841938] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 42 [ 6.850562] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000) [ 6.861925] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 43 [ 6.870524] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000) [ 6.881900] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 44 [ 6.890491] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000) [ 6.901850] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 45 [ 6.910455] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000) [ 6.921824] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 46 [ 6.930415] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000) [ 6.941771] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 47 [ 6.950375] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000) [ 6.961748] pva 16000000.pva0: Adding to iommu group 48 [ 6.967519] nvdla 15880000.nvdla0: Adding to iommu group 49 [ 6.973627] nvdla 158c0000.nvdla1: Adding to iommu group 50 [ 6.979769] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 2 [ 6.986980] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 6.994500] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 7.001129] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 7.007861] serial-tegra 3100000.serial: Adding to iommu group 2 [ 7.014478] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 17, base_baud = 0) is a TEGRA_UART [ 7.024259] serial-tegra 3130000.serial: Adding to iommu group 2 [ 7.030786] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 63, base_baud = 0) is a TEGRA_UART [ 7.040483] serial-tegra 3140000.serial: Adding to iommu group 2 [ 7.047065] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 64, base_baud = 0) is a TEGRA_UART [ 7.072970] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 7.082724] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.088295] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 7.096969] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 7.106571] tegra-xusb 3610000.xhci: irq 230, io mem 0x03610000 [ 7.113053] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.121558] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.128988] usb usb1: Product: xHCI Host Controller [ 7.134000] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 7.140262] usb usb1: SerialNumber: 3610000.xhci [ 7.145756] hub 1-0:1.0: USB hub found [ 7.149647] hub 1-0:1.0: 4 ports detected [ 7.154047] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.159610] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 7.167410] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 7.174957] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 7.183477] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.190909] usb usb2: Product: xHCI Host Controller [ 7.195917] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 7.202176] usb usb2: SerialNumber: 3610000.xhci [ 7.207464] hub 2-0:1.0: USB hub found [ 7.211337] hub 2-0:1.0: 4 ports detected [ 7.235703] i2c i2c-2: Added multiplexed i2c bus 9 [ 7.240996] i2c i2c-2: Added multiplexed i2c bus 10 [ 7.246022] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 7.253011] tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing [ 7.274704] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1560000 KHz, changing to: 1510400 KHz [ 7.288876] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 1561000 KHz, changing to: 1510400 KHz [ 7.300798] tegra194-cpufreq e000000.ccplex: probed with ICC [ 7.308866] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 7.309032] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 7.321567] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 7.328751] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 7.337473] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 7.341569] irq: IRQ294: trimming hierarchy from :interrupt-controller@f400000-1 [ 7.346153] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 7.353846] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 294 [ 7.412940] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 7.468941] tegra194-pcie 14100000.pcie: Link up [ 7.474993] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 7.481800] pci_bus 0001:00: root bus resource [bus 00-ff] [ 7.487437] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 7.497276] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 7.508088] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 7.516025] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 7.522378] pci 0001:00:00.0: PME# supported from D0 D3hot [ 7.533588] pci 0001:01:00.0: [10ec:c822] type 00 class 0x028000 [ 7.539930] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 7.545866] pci 0001:01:00.0: reg 0x18: [mem 0x20a8000000-0x20a800ffff 64bit] [ 7.554380] pci 0001:01:00.0: supports D1 D2 [ 7.558777] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 7.570965] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff] [ 7.578431] pci 0001:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 7.584816] pci 0001:01:00.0: BAR 2: assigned [mem 0x20a8000000-0x20a800ffff 64bit] [ 7.592821] pci 0001:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 7.599144] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 7.604547] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff] [ 7.610843] pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 7.618235] pci 0001:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 7.627010] pci 0001:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 7.627135] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.636044] pcieport 0001:00:00.0: Adding to iommu group 8 [ 7.644093] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.644094] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.644096] usb 1-2: Manufacturer: Generic [ 7.666200] hub 1-2:1.0: USB hub found [ 7.666411] pcieport 0001:00:00.0: PME: Signaling with IRQ 55 [ 7.675990] hub 1-2:1.0: 4 ports detected [ 7.676611] pcieport 0001:00:00.0: AER: enabled with IRQ 55 [ 7.686967] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 7.695023] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 7.702224] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 7.710927] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 7.719632] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 7.728559] usb 2-1: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.775472] usb 2-1: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.783898] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.791238] usb 2-1: Product: 4-Port USB 3.0 Hub [ 7.795980] usb 2-1: Manufacturer: Generic [ 7.812768] hub 2-1:1.0: USB hub found [ 7.818875] hub 2-1:1.0: 4 ports detected [ 7.836950] tegra194-pcie 14160000.pcie: Link up [ 7.850694] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 7.857500] pci_bus 0004:00: root bus resource [bus 00-ff] [ 7.863142] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 7.873267] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 7.884092] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 7.892011] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 7.893087] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.898325] pci 0004:00:00.0: PME# supported from D0 D3hot [ 7.915650] pci 0004:01:00.0: [1344:5416] type 00 class 0x010802 [ 7.922013] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 7.930798] pci 0004:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0004:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link) [ 7.950837] pci 0004:00:00.0: BAR 14: assigned [mem 0x2428000000-0x24280fffff] [ 7.958255] pci 0004:01:00.0: BAR 0: assigned [mem 0x2428000000-0x2428003fff 64bit] [ 7.966232] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 7.971602] pci 0004:00:00.0: bridge window [mem 0x2428000000-0x24280fffff] [ 7.978956] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 7.987693] pci 0004:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 7.996651] pcieport 0004:00:00.0: Adding to iommu group 9 [ 8.002525] pcieport 0004:00:00.0: PME: Signaling with IRQ 57 [ 8.008937] pcieport 0004:00:00.0: AER: enabled with IRQ 57 [ 8.015022] nvme 0004:01:00.0: Adding to iommu group 9 [ 8.020624] nvme nvme0: pci function 0004:01:00.0 [ 8.025526] nvme 0004:01:00.0: enabling device (0000 -> 0002) [ 8.026241] tegra194-pcie 141e0000.pcie: Using GICv2m MSI allocator [ 8.039185] tegra194-pcie 141e0000.pcie: host bridge /pcie@141e0000 ranges: [ 8.046378] tegra194-pcie 141e0000.pcie: IO 0x003e100000..0x003e1fffff -> 0x003e100000 [ 8.055085] tegra194-pcie 141e0000.pcie: MEM 0x3228000000..0x322fffffff -> 0x0040000000 [ 8.063815] tegra194-pcie 141e0000.pcie: MEM 0x2e40000000..0x3227ffffff -> 0x2e40000000 [ 8.067937] nvme nvme0: allocated 64 MiB host memory buffer. [ 8.075159] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 8.086719] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.094060] usb 1-3: Product: Bluetooth Radio [ 8.098527] usb 1-3: Manufacturer: Realtek [ 8.102728] usb 1-3: SerialNumber: 00e04c000001 [ 8.119118] nvme nvme0: 6/0/0 default/read/poll queues [ 8.127187] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 9.178858] tegra194-pcie 141e0000.pcie: Phy link never came up [ 9.185063] tegra194-pcie 141e0000.pcie: PCI host bridge to bus 0007:00 [ 9.191880] pci_bus 0007:00: root bus resource [bus 00-ff] [ 9.197518] pci_bus 0007:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3e100000-0x3e1fffff]) [ 9.207633] pci_bus 0007:00: root bus resource [mem 0x3228000000-0x322fffffff] (bus address [0x40000000-0x47ffffff]) [ 9.218461] pci_bus 0007:00: root bus resource [mem 0x2e40000000-0x3227ffffff pref] [ 9.226387] pci 0007:00:00.0: [10de:229a] type 01 class 0x060400 [ 9.232711] pci 0007:00:00.0: PME# supported from D0 D3hot [ 9.247644] pci 0007:00:00.0: PCI bridge to [bus 01-ff] [ 9.253035] pci 0007:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 9.262036] pcieport 0007:00:00.0: Adding to iommu group 10 [ 9.268040] pcieport 0007:00:00.0: PME: Signaling with IRQ 59 [ 9.274448] pcieport 0007:00:00.0: AER: enabled with IRQ 59 [ 9.280462] pci_bus 0007:01: busn_res: [bus 01-ff] is released [ 9.286584] pci 0007:00:00.0: Removing from iommu group 10 [ 9.292241] pci_bus 0007:00: busn_res: [bus 00-ff] is released [ 9.299879] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 9.306732] vdd-3v3-sd: supplied by vdd-3v3 [ 9.313518] tegra194-isp5 14800000.isp: initialized [ 9.322575] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 9.329062] (NULL device *): fops function table already registered [ 9.337465] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 9.344851] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 9.345186] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 9.351809] irq: IRQ302: trimming hierarchy from :interrupt-controller@f400000-1 [ 9.377360] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 294 [ 9.470087] tegra194-pcie 140a0000.pcie: host bridge /pcie@140a0000 ranges: [ 9.477275] tegra194-pcie 140a0000.pcie: IO 0x002a100000..0x002a1fffff -> 0x002a100000 [ 9.485963] tegra194-pcie 140a0000.pcie: MEM 0x3528000000..0x352fffffff -> 0x0040000000 [ 9.494647] tegra194-pcie 140a0000.pcie: MEM 0x3240000000..0x3527ffffff -> 0x3240000000 [ 9.609090] tegra194-pcie 140a0000.pcie: Link up [ 9.616056] tegra194-pcie 140a0000.pcie: PCI host bridge to bus 0008:00 [ 9.622879] pci_bus 0008:00: root bus resource [bus 00-ff] [ 9.628518] pci_bus 0008:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x2a100000-0x2a1fffff]) [ 9.638632] pci_bus 0008:00: root bus resource [mem 0x3528000000-0x352fffffff] (bus address [0x40000000-0x47ffffff]) [ 9.649458] pci_bus 0008:00: root bus resource [mem 0x3240000000-0x3527ffffff pref] [ 9.657384] pci 0008:00:00.0: [10de:229c] type 01 class 0x060400 [ 9.663707] pci 0008:00:00.0: PME# supported from D0 D3hot [ 9.674247] pci 0008:01:00.0: [10ec:8168] type 00 class 0x020000 [ 9.680568] pci 0008:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 9.686483] pci 0008:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 9.693582] pci 0008:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 9.701602] pci 0008:01:00.0: supports D1 D2 [ 9.705998] pci 0008:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 9.717918] pci 0008:00:00.0: BAR 14: assigned [mem 0x3528000000-0x35280fffff] [ 9.725354] pci 0008:00:00.0: BAR 13: assigned [io 0x300000-0x300fff] [ 9.732064] pci 0008:01:00.0: BAR 4: assigned [mem 0x3528000000-0x3528003fff 64bit] [ 9.740032] pci 0008:01:00.0: BAR 2: assigned [mem 0x3528004000-0x3528004fff 64bit] [ 9.748000] pci 0008:01:00.0: BAR 0: assigned [io 0x300000-0x3000ff] [ 9.754656] pci 0008:00:00.0: PCI bridge to [bus 01-ff] [ 9.760026] pci 0008:00:00.0: bridge window [io 0x300000-0x300fff] [ 9.766648] pci 0008:00:00.0: bridge window [mem 0x3528000000-0x35280fffff] [ 9.774007] pci 0008:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 9.782753] pci 0008:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 9.791706] pcieport 0008:00:00.0: Adding to iommu group 11 [ 9.797702] pcieport 0008:00:00.0: PME: Signaling with IRQ 61 [ 9.804103] pcieport 0008:00:00.0: AER: enabled with IRQ 61 [ 9.810835] pva 16000000.pva0: deferred probe timeout, ignoring dependency [ 9.817912] pva: probe of 16000000.pva0 failed with error -110 [ 9.824006] nvdla 15880000.nvdla0: deferred probe timeout, ignoring dependency [ 9.831438] nvdla: probe of 15880000.nvdla0 failed with error -110 [ 9.837886] nvdla 158c0000.nvdla1: deferred probe timeout, ignoring dependency [ 9.845317] nvdla: probe of 158c0000.nvdla1 failed with error -110 [ 9.852754] irq: IRQ304: trimming hierarchy from :pmc@c360000 [ 9.858730] irq: IRQ305: trimming hierarchy from :interrupt-controller@f400000-1 [ 9.866446] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 9.874153] tegra-se-nvhost 15810000.se: Adding to iommu group 51 [ 9.880786] tegra-se-nvhost 15810000.se: initialized [ 9.887433] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 9.893852] tegra-se-nvhost 15820000.se: Adding to iommu group 52 [ 9.900450] tegra-se-nvhost 15820000.se: initialized [ 9.907110] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 9.913511] tegra-se-nvhost 15840000.se: Adding to iommu group 53 [ 9.920074] tegra-se-nvhost 15840000.se: initialized [ 9.926560] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 9.933574] tegra_actmon d230000.actmon: in actmon_register()... [ 9.939919] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 9.946251] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 9.954763] hvc_sysfs: hypervisor is not present [ 9.994777] ALSA device list: [ 9.997828] No soundcards found. [ 10.002215] Freeing unused kernel memory: 3968K [ 10.006928] Run /init as init process [ 10.027080] Root device found: mmcblk1p1 [ 10.442576] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 10.826136] mmc1: new ultra high speed SDR104 SDXC card at address aaaa [ 10.833368] mmcblk1: mmc1:aaaa SH64G 59.5 GiB [ 10.981179] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 11.047405] Found dev node: /dev/mmcblk1p1 [ 11.861989] EXT4-fs (mmcblk1p1): 3 orphan inodes deleted [ 11.867478] EXT4-fs (mmcblk1p1): recovery complete [ 11.887304] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 11.897313] Rootfs mounted over mmcblk1p1 [ 12.050975] Switching from initrd to actual rootfs [ 12.280590] systemd[1]: System time before build time, advancing clock. [ 12.507179] systemd[1]: systemd 245.4-4ubuntu3.19 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 12.530910] systemd[1]: Detected architecture arm64. [ 12.859676] systemd[1]: Set hostname to . [ 13.253991] random: systemd: uninitialized urandom read (16 bytes read) [ 13.260938] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 13.273961] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 13.284030] systemd[1]: Created slice system-modprobe.slice. [ 13.304982] random: systemd: uninitialized urandom read (16 bytes read) [ 13.312282] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 13.332977] random: systemd: uninitialized urandom read (16 bytes read) [ 13.340250] systemd[1]: Created slice User and Session Slice. [ 13.361070] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 13.385284] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 13.409052] systemd[1]: Reached target User and Group Name Lookups. [ 13.428984] systemd[1]: Reached target Slices. [ 13.444975] systemd[1]: Reached target Mounting snaps. [ 13.464976] systemd[1]: Reached target Swap. [ 13.481283] systemd[1]: Listening on RPCbind Server Activation Socket. [ 13.501106] systemd[1]: Listening on Syslog Socket. [ 13.521098] systemd[1]: Listening on fsck to fsckd communication Socket. [ 13.545048] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 13.565229] systemd[1]: Listening on Journal Audit Socket. [ 13.585086] systemd[1]: Listening on Journal Socket (/dev/log). [ 13.605134] systemd[1]: Listening on Journal Socket. [ 13.625125] systemd[1]: Listening on udev Control Socket. [ 13.645055] systemd[1]: Listening on udev Kernel Socket. [ 13.666609] systemd[1]: Mounting Huge Pages File System... [ 13.686436] systemd[1]: Mounting POSIX Message Queue File System... [ 13.710456] systemd[1]: Mounting RPC Pipe File System... [ 13.730489] systemd[1]: Mounting Kernel Debug File System... [ 13.750482] systemd[1]: Mounting Kernel Trace File System... [ 13.774788] systemd[1]: Starting Journal Service... [ 13.794799] systemd[1]: Starting Set the console keyboard layout... [ 13.804552] random: crng init done [ 13.810584] random: 7 urandom warning(s) missed due to ratelimiting [ 13.830836] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 13.858686] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 13.881025] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 13.891060] systemd[1]: Starting Load Kernel Module efi_pstore... [ 13.910526] systemd[1]: Starting Load Kernel Module pstore_blk... [ 13.930240] systemd[1]: Starting Load Kernel Module pstore_zone... [ 13.954274] systemd[1]: Starting Load Kernel Module ramoops... [ 13.974498] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 14.002436] systemd[1]: Started Nameserver information manager. [ 14.025198] systemd[1]: Reached target Network (Pre). [ 14.060256] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 14.069645] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 14.084181] systemd[1]: Starting Load Kernel Modules... [ 14.106346] systemd[1]: Starting Remount Root and Kernel File Systems... [ 14.114672] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 14.117218] EXT4-fs (mmcblk1p1): re-mounted. Opts: (null) [ 14.123241] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x0000000249800000,914358272 [ 14.141175] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 14.149418] nvmap_page_pool_init: Total RAM pages: 1659035 [ 14.155065] nvmap_page_pool_init: nvmap page pool size: 207379 pages (810 MB) [ 14.162484] nvmap_background_zero_thread: PP zeroing thread starting. [ 14.162608] misc nvmap: created heap vpr base 0x0000000249800000 size (892928KiB) [ 14.178579] systemd[1]: Starting udev Coldplug all Devices... [ 14.203268] systemd[1]: Started Journal Service. [ 14.437492] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 14.437492] [ 14.614125] systemd-journald[255]: Received client request to flush runtime journal. [ 16.669505] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 16.687751] imx219 9-0010: board setup failed [ 16.697938] imx219: probe of 9-0010 failed with error -121 [ 16.720510] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 16.736063] imx219 10-0010: board setup failed [ 16.742429] imx219: probe of 10-0010 failed with error -121 [ 16.752656] nvidia: loading out-of-tree module taints kernel. [ 16.802457] fusb301 1-0025: toggle_time(0) is not updated [ 18.328097] using random self ethernet address [ 18.334873] using random host ethernet address [ 19.307409] using random self ethernet address [ 19.312788] using random host ethernet address Ubuntu 20.04.5 LTS jetson-desktop ttyTCU0 jetson-desktop login: [ 27.373355] Bridge firewalling registered [ 31.471699] audit: type=1326 audit(1749544441.055:2): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=2523 comm="cupsd" exe="/snap/cups/1086/sbin/cupsd" sig=0 arch=c00000b7 syscall=55 compat=0 ip=0xffff9cc3910c code=0x50000 [ 31.763113] audit: type=1326 audit(1749544441.347:3): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=2523 comm="cupsd" exe="/snap/cups/1086/sbin/cupsd" sig=0 arch=c00000b7 syscall=55 compat=0 ip=0xffff9cc3910c code=0x50000 [ 31.785418] audit: type=1326 audit(1749544441.371:4): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=2537 comm="cups-browsed" exe="/snap/cups/1086/sbin/cups-browsed" sig=0 arch=c00000b7 syscall=274 compat=0 ip=0xffff83891c28 code=0x50000