tafir@nano:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5496-d5000) (g cc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065 c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:13:06 P DT 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nv idia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id n vidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible i d nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M secti on=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvf s=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debu g_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_ scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 gpt earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype= ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet root=/d ev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbc on=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29868(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes ) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3568472K/4159488K available (15358K kernel code, 2956K rw data, 6692K rodata, 8640K init, 612K bss, 115880K reserved, 475136K cma-reserved ) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 M B) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 G B) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 K B) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 K B) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 K B) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 K B) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 K B) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 K B) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 M B) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 G B maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 M B actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 M B) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /inte rrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (ph ys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 43980 46511078ns [ 0.001644] Console: colour dummy device 80x25 [ 0.001655] console [tty0] enabled [ 0.001661] bootconsole [uart8250] disabled [ 0.001682] kmemleak: Kernel memory leak detector disabled [ 0.001701] Calibrating delay loop (skipped), value calculated using timer fr equency.. 38.40 BogoMIPS (lpj=76800) [ 0.001713] pid_max: default: 32768 minimum: 301 [ 0.002154] Security Framework initialized [ 0.002375] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002383] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003490] ftrace: allocating 47077 entries in 184 pages [ 0.170731] sched-energy: CPU device node has no sched-energy-costs [ 0.170763] ASID allocator initialised with 65536 entries [ 0.207582] tegra-id: chipid=22117. [ 0.207595] tegra-id: opt_subrevision=0. [ 0.207612] Tegra Speedo/IDDQ fuse revision 4 [ 0.207617] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.207621] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.207628] Tegra: CPU Speedo Value 2042, SoC Speedo Value 1936, GPU Speedo V alue 2069 [ 0.207631] Tegra: CPU IDDQ Value 1724, SoC IDDQ Value 1964, GPU IDDQ Value 2 535 [ 0.207651] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.207666] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/ arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel- dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.207673] DTB Build time: Jul 26 2021 12:16:29 [ 0.257051] CPU1: Booted secondary processor [411fd071] [ 0.288956] CPU2: Booted secondary processor [411fd071] [ 0.320927] CPU3: Booted secondary processor [411fd071] [ 0.321013] Brought up 4 CPUs [ 0.321020] SMP: Total of 4 processors activated. [ 0.321029] CPU features: detected feature: 32-bit EL0 Support [ 0.321293] CPU: All CPU(s) started at EL2 [ 0.321310] alternatives: patching kernel code [ 0.329385] devtmpfs: initialized [ 0.366767] Initilizing CustomIPI irq domain [ 0.367075] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 7645041785100000 ns [ 0.367096] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.377615] pinctrl core: initialized pinctrl subsystem [ 0.378189] OS set in device tree is not L4T. [ 0.378606] regulator-dummy: no parameters [ 0.378885] Initializing plugin-manager [ 0.379040] Plugin module not found [ 0.379228] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.379734] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.380689] node /plugin-manager/fragement@7 match with odm-data enable-pmic- wdt [ 0.380901] node /plugin-manager/fragement@8 match with odm-data enable-pmic- wdt [ 0.381580] node /plugin-manager/fragement@13 match with board >=3448-0000-30 0 [ 0.385125] NET: Registered protocol family 16 [ 0.386392] pstore: using zlib compression [ 0.386432] console [pstore-1] enabled [ 0.386437] pstore: Registered ramoops as persistent store backend [ 0.386442] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.401066] cpuidle: using governor menu [ 0.405114] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.406728] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e840 00) [ 0.406749] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.409514] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomi c allocations [ 0.411787] Serial: AMBA PL011 UART driver [ 0.412288] tegra_powergate_init: DONE [ 0.412303] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/ arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel- dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.412309] DTB Build time: Jul 26 2021 12:16:29 [ 0.414165] Tegra reboot handler registered. [ 0.418714] iommu: Adding device tegra-carveouts to group 0 [ 0.418846] platform tegra-carveouts: domain=ffffffc0f94363d8 allocates as[0] =ffffffc0f9bd80a8 [ 0.419195] iommu: Adding device smmu_test to group 1 [ 0.419249] platform smmu_test: domain=ffffffc0f9436618 allocates as[0]=fffff fc0f9bd8110 [ 0.420065] mc: mapped MMIO address: 0xffffff8008041000 -> 0x70019000 [ 0.420122] mc: mapped MMIO address: 0xffffff8008067000 -> 0x7001c000 [ 0.420177] mc: mapped MMIO address: 0xffffff800807b000 -> 0x7001d000 [ 0.420187] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.420210] mc-err: mcerr ops are set to t21x [ 0.430893] iommu: Adding device 70090000.xusb to group 2 [ 0.431173] iommu: Adding device 70006000.serial to group 3 [ 0.431250] platform 70006000.serial: domain=ffffffc0f94d6558 allocates as[0] =ffffffc0f9bd8178 [ 0.431683] iommu: Adding device 70006040.serial to group 4 [ 0.431959] iommu: Adding device 70006200.serial to group 5 [ 0.432178] iommu: Adding device sound to group 6 [ 0.432227] platform sound: domain=ffffffc0f94d6a98 allocates as[0]=ffffffc0f 9bd81e0 [ 0.432795] iommu: Adding device 7000d400.spi to group 7 [ 0.433100] iommu: Adding device 7000d600.spi to group 8 [ 0.433385] iommu: Adding device 70410000.spi to group 9 [ 0.433687] iommu: Adding device 50000000.host1x to group 10 [ 0.433958] iommu: Adding device 54080000.vi to group 11 [ 0.434347] iommu: Adding device 54600000.isp to group 12 [ 0.434643] iommu: Adding device 54680000.isp to group 13 [ 0.434913] iommu: Adding device tegradc.0 to group 14 [ 0.434967] platform tegradc.0: domain=ffffffc0f94e19d8 allocates as[0]=fffff fc0f9bd8248 [ 0.435480] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.435791] iommu: Adding device tegradc.1 to group 15 [ 0.435838] platform tegradc.1: domain=ffffffc0f94e1c18 allocates as[0]=fffff fc0f9bd82b0 [ 0.436349] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.436599] iommu: Adding device 54340000.vic to group 16 [ 0.436800] iommu: Adding device 544c0000.nvenc to group 17 [ 0.437149] iommu: Adding device 54500000.tsec to group 18 [ 0.437359] iommu: Adding device 54100000.tsecb to group 19 [ 0.437577] iommu: Adding device 54480000.nvdec to group 20 [ 0.437768] iommu: Adding device 54380000.nvjpg to group 21 [ 0.438807] iommu: Adding device 546c0000.i2c to group 22 [ 0.439129] iommu: Adding device 57000000.gpu to group 23 [ 0.439180] platform 57000000.gpu: domain=ffffffc0f94ebc18 allocates as[0]=ff ffffc0f9bd8318 [ 0.439214] platform 57000000.gpu: domain=ffffffc0f94ebc18 allocates as[1]=ff ffffc0f9bd8380 [ 0.439254] platform 57000000.gpu: domain=ffffffc0f94ebc18 allocates as[2]=ff ffffc0f9bd83e8 [ 0.439309] platform 57000000.gpu: domain=ffffffc0f94ebc18 allocates as[3]=ff ffffc0f9bd8450 [ 0.440167] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency t hermal reset disabled. [ 0.440178] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.440192] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.440195] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.440200] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.493141] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registere d [ 0.493148] tegra-pmc: Clear bootloader IO dpd settings [ 0.493167] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.493232] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.493525] iommu: Adding device 70012000.se to group 24 [ 0.494304] iommu: Adding device 7000c000.i2c to group 25 [ 0.494560] iommu: Adding device 7000c400.i2c to group 26 [ 0.494845] iommu: Adding device 7000c500.i2c to group 27 [ 0.495098] iommu: Adding device 7000c700.i2c to group 28 [ 0.495346] iommu: Adding device 7000d000.i2c to group 29 [ 0.495592] iommu: Adding device 7000d100.i2c to group 30 [ 0.495875] iommu: Adding device sdhci-tegra.0 to group 31 [ 0.495923] platform sdhci-tegra.0: domain=ffffffc0f9581e58 allocates as[0]=f fffffc0f9bd84b8 [ 0.496761] iommu: Adding device 700d0000.xudc to group 32 [ 0.500049] vdd-ac-bat: 5000 mV [ 0.500451] vdd-5v0-sys: 5000 mV [ 0.501125] vdd-5v0-hdmi: 5000 mV [ 0.501536] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.501783] vdd-1v8-sys: 1800 mV [ 0.502150] vdd-fan: 5000 mV [ 0.502370] vdd-fan: supplied by vdd-5v0-sys [ 0.502622] vdd-usb-vbus: 5000 mV [ 0.502835] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.503167] vdd-usb-vbus2: 5000 mV [ 0.533774] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.535924] gpio gpiochip0: gpio-line-names specifies 240 line names but ther e are 256 lines on the chip [ 0.537554] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.537581] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.537601] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.537966] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip 0 (tegra-gpio) [ 0.546563] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.546917] SCSI subsystem initialized [ 0.547099] libata version 3.00 loaded. [ 0.547392] usbcore: registered new interface driver usbfs [ 0.547440] usbcore: registered new interface driver hub [ 0.547479] usbcore: registered new device driver usb [ 0.551478] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.557206] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.558123] random: fast init done [ 0.558233] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.561064] vdd-ddr-1v1: 1150 mV [ 0.564953] vdd-pre-reg-1v35: 1350 mV [ 0.568945] vdd-1v8: 1800 mV [ 0.572950] avdd-sys-1v2: 1200 mV [ 0.576946] vdd-pex-1v0: 1050 mV [ 0.577588] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.578140] max77620-ldo3: at 3100 mV [ 0.580951] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.581477] max77620-ldo5: at 3100 mV [ 0.584946] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.588949] avdd-1v05-pll: 1050 mV [ 0.592945] avdd-io-hdmi-dp: 1050 mV [ 0.595570] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.595837] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpioch ip1 (max77620-gpio) [ 0.596125] max77620 4-003c: max77620 probe successful [ 0.598847] media: Linux media interface: v0.10 [ 0.598905] Linux video capture interface: v2.00 [ 0.599799] pps_core: LinuxPPS API ver. 1 registered [ 0.599805] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti [ 0.599829] PTP clock support registered [ 0.603091] tegra210-emc 7001b000.external-memory-controller: validated EMC D FS table [ 0.603978] Advanced Linux Sound Architecture Driver Initialized. [ 0.604623] Bluetooth: Core ver 2.22 [ 0.604668] NET: Registered protocol family 31 [ 0.604672] Bluetooth: HCI device and connection manager initialized [ 0.604686] Bluetooth: HCI socket layer initialized [ 0.604694] Bluetooth: L2CAP socket layer initialized [ 0.604724] Bluetooth: SCO socket layer initialized [ 0.606562] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.606578] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.606631] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.606646] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.609998] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering pr obe [ 0.611096] vdd-3v3-sys: 3300 mV [ 0.611481] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.611525] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.613022] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.613444] vdd-3v3-sd: 3300 mV [ 0.613800] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.614554] avdd-io-edp-1v05: 1050 mV [ 0.614895] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.615024] vdd-usb-hub-en: 5000 mV [ 0.615354] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.616387] camchar: rtcpu character device driver loaded [ 0.617106] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1 [ 0.618498] clocksource: Switched to clocksource arch_sys_counter [ 0.658032] VFS: Disk quotas dquot_6.6.0 [ 0.658156] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.658731] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.659213] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr , base=0x00000000d7000000, size=0x19000000 [ 0.659229] dma-vpr: heap size is not multiple of cma_chunk_size heap_info-> num_chunks (13) rem_chunk_size(0x1000000) [ 0.659431] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.659436] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap =vpr create successful [ 0.659448] tegra-carveouts tegra-carveouts: assigned reserved memory node vp r-carveout [ 0.659476] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0 x0000000040001000,258048 [ 0.659483] tegra-carveouts tegra-carveouts: assigned reserved memory node ir am-carveout [ 0.659496] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.659504] nvmap_page_pool_init: Total RAM pages: 1010902 [ 0.659508] nvmap_page_pool_init: nvmap page pool size: 126362 pages (493 MB) [ 0.659592] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.660047] misc nvmap: created heap iram base 0x0000000040001000 size (252Ki B) [ 0.660994] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600 KiB) [ 0.669098] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.669531] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.669887] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.670152] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.670322] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.670628] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.670633] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.671062] NET: Registered protocol family 2 [ 0.672099] TCP established hash table entries: 32768 (order: 6, 262144 bytes ) [ 0.672311] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.672809] TCP: Hash tables configured (established 32768 bind 32768) [ 0.672952] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.673032] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.673425] NET: Registered protocol family 1 [ 0.674038] RPC: Registered named UNIX socket transport module. [ 0.674044] RPC: Registered udp transport module. [ 0.674048] RPC: Registered tcp transport module. [ 0.674052] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.674065] PCI: CLS 0 bytes, default 64 [ 0.674295] Trying to unpack rootfs image as initramfs... [ 0.977705] Freeing initrd memory: 6992K [ 0.987593] host1x 50000000.host1x: initialized [ 0.989412] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters av ailable [ 0.992687] audit: initializing netlink subsys (disabled) [ 0.992754] audit: type=2000 audit(0.843:1): initialized [ 0.993428] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.003400] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.004847] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.005621] 9p: Installing v9fs 9p2000 file system support [ 1.008918] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 40) [ 1.009030] io scheduler noop registered [ 1.009334] io scheduler cfq registered (default) [ 1.012041] gic 702f9000.agic: GIC IRQ controller registered [ 1.015042] iommu: Adding device 702ef000.adsp to group 33 [ 1.024369] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 1.024513] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.025119] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x9248c10 [ 1.025128] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_ 0 = 0x4 [ 1.026818] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.026925] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.027031] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.027229] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.027327] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.027416] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.027513] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.027602] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.027691] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.027776] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.034020] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.035740] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.037598] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.038959] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.039308] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.040550] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:c amera_platform_driver probe [ 1.040770] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1 500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.040998] Adding domain tsec-pd to PM domain host1x-pd [ 1.043104] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.044156] tsec 54500000.tsec: initialized [ 1.045725] tsec 54100000.tsecb: initialized [ 1.046428] Adding domain nvdec-pd to PM domain host1x-pd [ 1.049851] nvdec 54480000.nvdec: initialized [ 1.050934] Adding domain vic03-pd to PM domain host1x-pd [ 1.051110] Adding domain msenc-pd to PM domain host1x-pd [ 1.051284] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.055287] falcon 54340000.vic: initialized [ 1.056495] falcon 544c0000.nvenc: initialized [ 1.057839] falcon 54380000.nvjpg: initialized [ 1.062375] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FF F irq=97 [ 1.062421] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.062444] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.062452] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.062570] display board info: id 0x0, fab 0x0 [ 1.062633] generic_infoframe_type: 0x87 [ 1.062760] tegradc tegradc.0: DT parsed successfully [ 1.062791] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.062796] tegra_cec 70015000.tegra_cec: probed [ 1.062811] tegradc tegradc.0: Display dc.ffffff800abc0000 registered with id =0 [ 1.066384] tegradc tegradc.0: probed [ 1.067156] Console: switching to colour frame buffer device 80x30 [ 1.067193] tegradc tegradc.0: fb registered [ 1.068433] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.068511] tegradc tegradc.1: No lt-data, using default setting [ 1.068539] tegradc tegradc.1: No hpd-gpio in DT [ 1.068573] tegradc tegradc.1: DT parsed successfully [ 1.068618] tegradc tegradc.1: Display dc.ffffff800ad40000 registered with id =1 [ 1.070139] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.071335] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 cha nnels [ 1.575918] Host read timeout at address 545c00c4 [ 1.577496] tegradc tegradc.1: probed [ 1.577895] tegradc tegradc.1: fb registered [ 1.579393] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 chan nels [ 1.580221] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check d isabled [ 1.580227] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initi alized [ 1.580536] kfuse 7000fc00.kfuse: initialized [ 1.581115] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.581122] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.581132] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.581150] tegradc tegradc.1: blank - powerdown [ 1.581171] extcon-disp-state extcon:disp-state: cable 44 state 0 already set . [ 1.581176] Extcon DP: HPD disabled [ 1.581180] hpd: hpd_switch 0 [ 1.581184] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.581193] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.581200] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.581474] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-suppl y not available [ 1.582310] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.583265] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.583277] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.583685] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator regis tration passed [ 1.585009] vdd-gpu: applied init 1000000uV constraint [ 1.585017] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.585368] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator regis tration passed [ 1.588776] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.588873] No Device Node present for smmu client: serial8250 !! [ 1.588882] platform serial8250: No iommus property found in DT node, got swg ids from fixup(101004000) [ 1.588924] iommu: Adding device serial8250 to group 35 [ 1.591280] console [ttyS0] disabled [ 1.591382] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.601689] console [ttyS0] enabled [ 1.602727] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.603036] serial-tegra 70006200.serial: RX in PIO mode [ 1.603136] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.604139] [drm] Initialized [ 1.614072] brd: module loaded [ 1.619237] loop: module loaded [ 1.619317] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.619430] tegra_profiler: auth: init [ 1.620797] THERMAL EST: found 2 subdevs [ 1.620807] THERMAL EST num_resources: 0 [ 1.620814] [THERMAL EST subdev 0] [ 1.620820] [THERMAL EST subdev 1] [ 1.621285] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.621288] THERMAL EST: thz register success. [ 1.621441] THERMAL EST: end of probe, return err: 0 [ 1.622760] sd: No Scsi addr parsed to reserve index [ 1.622804] hisi_sas: driver version v1.6 [ 1.627880] tegra-qspi 70410000.spi: Prod settings list not found [ 1.629400] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 1.629411] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4M iB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 1.632532] libphy: Fixed MDIO Bus: probed [ 1.633394] tun: Universal TUN/TAP device driver, 1.6 [ 1.633401] tun: (C) 1999-2004 Max Krasnyansky [ 1.634361] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.634365] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.634419] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.634422] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.634467] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.634472] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.634584] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4 .4.0-k [ 1.634588] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.635768] PPP generic driver version 2.4.2 [ 1.635968] PPP BSD Compression module registered [ 1.635975] PPP Deflate Compression module registered [ 1.636014] PPP MPPE Compression module registered [ 1.636020] NET: Registered protocol family 24 [ 1.636092] usbcore: registered new interface driver r8152 [ 1.636134] usbcore: registered new interface driver asix [ 1.636171] usbcore: registered new interface driver ax88179_178a [ 1.636209] usbcore: registered new interface driver cdc_ether [ 1.636239] usbcore: registered new interface driver net1080 [ 1.636268] usbcore: registered new interface driver cdc_subset [ 1.636298] usbcore: registered new interface driver zaurus [ 1.636348] usbcore: registered new interface driver cdc_ncm [ 1.636535] VFIO - User Level meta-driver version: 0.3 [ 1.638045] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.638071] ehci-pci: EHCI PCI platform driver [ 1.638115] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.638126] ohci-pci: OHCI PCI platform driver [ 1.638167] ohci-platform: OHCI generic platform driver [ 1.641184] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.641801] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.643034] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f94b7800 id [ 1.644378] usbcore: registered new interface driver uas [ 1.644449] usbcore: registered new interface driver usb-storage [ 1.644609] usbcore: registered new interface driver usbserial [ 1.646573] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 1.646631] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.646662] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus nu mber 1 [ 1.647449] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.647489] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.647695] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.647703] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.647708] usb usb1: Product: xHCI Host Controller [ 1.647713] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.647718] usb usb1: SerialNumber: 70090000.xusb [ 1.648364] hub 1-0:1.0: USB hub found [ 1.648411] hub 1-0:1.0: 5 ports detected [ 1.648501] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.649019] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.649030] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus nu mber 2 [ 1.649126] usb usb2: We don't know the algorithms for LPM for this host, dis abling LPM. [ 1.649249] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.649258] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.649263] usb usb2: Product: xHCI Host Controller [ 1.649267] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.649277] usb usb2: SerialNumber: 70090000.xusb [ 1.650074] hub 2-0:1.0: USB hub found [ 1.650108] hub 2-0:1.0: 4 ports detected [ 1.650297] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.650313] tegra-xudc-new 700d0000.xudc: vbus state: 1 [ 1.650330] tegra-xudc-new 700d0000.xudc: device mode on: 0 [ 1.650358] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [ 1.650387] tegra-xudc-new 700d0000.xudc: active: 0 => 1 [ 1.650997] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.651007] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.651365] mousedev: PS/2 mouse device common for all mice [ 1.651479] usbcore: registered new interface driver xpad [ 1.750861] usb usb2: usb_suspend_both: status 0 [ 1.750954] usb usb1: usb_suspend_both: status 0 [ 1.757134] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as r tc0 [ 1.759652] rtc rtc1: alarm rtc device [ 1.759675] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.759709] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.760425] i2c /dev entries driver [ 1.762335] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.762762] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.762770] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.763563] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.786908] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.787003] imx219 7-0010: imx219_board_setup: error during i2c read probe (- 121) [ 1.794638] imx219 7-0010: board setup failed [ 1.799080] imx219: probe of 7-0010 failed with error -121 [ 1.799677] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.822970] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.823058] imx219 8-0010: imx219_board_setup: error during i2c read probe (- 121) [ 1.830627] imx219 8-0010: board setup failed [ 1.835055] imx219: probe of 8-0010 failed with error -121 [ 1.836340] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.838907] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.838912] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.839361] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -214 7483647 forced to -127000 [ 1.839379] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.839389] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when c pu reaches 100500 mC [ 1.839554] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -214 7483647 forced to -127000 [ 1.839566] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.839574] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when g pu reaches 101000 mC [ 1.839724] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -214 7483647 forced to -127000 [ 1.839736] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.839742] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot tem perature [ 1.839918] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.840731] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.840785] tegra_aotag tegra-aotag: Invalid temp readout [ 1.840813] tegra_aotag tegra-aotag: Invalid temp readout [ 1.840831] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.840841] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.841777] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -214 7483647 forced to -127000 [ 1.841798] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.841993] tegra_aotag tegra-aotag: Invalid temp readout [ 1.842026] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling devi ce' registered [ 1.842441] parse_throttle_dt_data: Num cap clks = 6 [ 1.842448] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.842464] parse_throttle_dt_data: clk=gpu type=4 [ 1.842528] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.842549] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.842571] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.842575] parse_throttle_dt_data: clk=emc type=3 [ 1.842953] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -214 7483647 forced to -127000 [ 1.843060] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -214 7483647 forced to -127000 [ 1.843194] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.843993] FAN dev name: pwm-fan [ 1.844070] FAN:gpio request success. [ 1.844132] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.844441] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.844619] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.844630] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.844736] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, st ate:2 [ 1.844742] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.844748] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.844753] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.844758] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.844763] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.844768] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.844772] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.844777] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1 , state:4 [ 1.844782] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1 , state:4 [ 1.847653] device-mapper: uevent: version 1.0.3 [ 1.848109] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-d evel@redhat.com [ 1.853541] tegra210-cpufreq cpufreq: probe()...completed [ 1.854264] sdhci: Secure Digital Host Controller Interface driver [ 1.854266] sdhci: Copyright(c) Pierre Ossman [ 1.854269] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.854790] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 1.855148] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 1.855274] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 1.860467] tegra-se 70012000.se: tegra_se_probe: complete [ 1.860983] hidraw: raw HID events driver (C) Jiri Kosina [ 1.862083] usbcore: registered new interface driver usbhid [ 1.862086] usbhid: USB HID core driver [ 1.864258] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.864417] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.866462] nvpmodel: initialized successfully [ 1.867701] usbcore: registered new interface driver snd-usb-audio [ 1.867756] No Device Node present for smmu client: snd-soc-dummy !! [ 1.867761] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.867779] iommu: Adding device snd-soc-dummy to group 36 [ 1.873257] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/car d0/input0 [ 1.892541] OPE platform probe [ 1.892642] OPE platform probe successful [ 1.892897] OPE platform probe [ 1.892978] OPE platform probe successful [ 1.902779] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADM A 64-bit with 64 bit addr [ 1.918389] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.918558] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.918690] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.918817] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.918945] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.919073] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.919206] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.919332] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.919458] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.919587] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.931513] u32 classifier [ 1.931515] Actions configured [ 1.931619] Initializing XFRM netlink socket [ 1.932342] NET: Registered protocol family 10 [ 1.933042] NET: Registered protocol family 17 [ 1.933053] NET: Registered protocol family 15 [ 1.933128] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.933179] Bluetooth: RFCOMM socket layer initialized [ 1.933188] Bluetooth: RFCOMM ver 1.11 [ 1.933193] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.933197] Bluetooth: HIDP socket layer initialized [ 1.933215] 9pnet: Installing 9P2000 support [ 1.933251] Key type dns_resolver registered [ 1.933606] Registered cp15_barrier emulation handler [ 1.933613] Registered setend emulation handler [ 1.934694] registered taskstats version 1 [ 1.935219] Adding domain ve2-pd to PM domain host1x-pd [ 1.935470] Adding domain ve-pd to PM domain host1x-pd [ 1.937525] isp 54600000.isp: initialized [ 1.938522] isp 54680000.isp: initialized [ 1.948835] last reset is due to power on reset [ 1.948840] KERNEL: PMC reset status reg: 0x0 [ 1.948901] BL: PMC reset status reg: 0x0 [ 1.948903] BL: PMIC poweroff Event Recorder: 0x40 [ 1.950333] clk_cbus_recalc_rate: no gbus parent [ 1.950338] clk_cbus_round_rate: no gbus parent [ 1.950341] clk_cbus_round_rate: no gbus parent [ 1.950347] clk_cbus_recalc_rate: no gbus parent [ 1.950453] clk_cbus_recalc_rate: no gbus parent [ 1.950456] clk_cbus_round_rate: no gbus parent [ 1.950459] clk_cbus_round_rate: no gbus parent [ 1.950462] clk_cbus_recalc_rate: no gbus parent [ 1.951200] tegra_dvfs: GPU-cap: registered [ 1.951256] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200u V, scaling enabled [ 1.951258] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500 uV, scaling enabled [ 1.951261] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000u V, scaling enabled [ 1.952739] tegra_dvfs: vdd-gpu-vts: registered [ 1.953483] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor co oling device' registered [ 1.954171] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap coolin g device' registered [ 1.954781] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.968518] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.987492] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00: 12 UTC (946688412) [ 1.988488] vi 54080000.vi: vi_probe: ++ [ 1.991597] vi 54080000.vi: initialized [ 1.993794] vi 54080000.vi: subdev nvcsi--2 bound [ 1.993897] vi 54080000.vi: subdev nvcsi--1 bound [ 1.995437] Disable partitions left on by BL [ 1.995440] disb [ 1.995489] bwmgr: missing cdev-type property [ 1.995614] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -214 7483647 forced to -127000 [ 1.995621] DRAM derating cdev registered. [ 1.996485] ALSA device list: [ 1.996488] #0: tegra-hda at 0x70038000 irq 83 [ 1.996491] #1: tegra-snd-t210ref-mobile-rt565x [ 1.999614] Freeing unused kernel memory: 8640K [ 2.023398] Root device found: mmcblk0p1 [ 2.066505] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 2.066509] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.096177] mmc0: hw tuning done ... [ 2.096215] mmc0: new ultra high speed SDR104 SDXC card at address 59b4 [ 2.100701] mmcblk0: mmc0:59b4 USDU1 57.8 GiB [ 2.104086] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 2.228389] Found dev node: /dev/mmcblk0p1 [ 2.372596] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.690670] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted [ 2.690674] EXT4-fs (mmcblk0p1): recovery complete [ 2.697120] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. O pts: (null) [ 2.698991] Rootfs mounted over mmcblk0p1 [ 2.710278] Switching from initrd to actual rootfs [ 2.774532] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.776556] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.852850] systemd[1]: System time before build time, advancing clock. [ 2.874662] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.881849] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.881855] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.881859] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.881863] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pre f] [ 2.881867] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.881888] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.881950] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.882095] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), rec onfiguring [ 2.882202] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.882225] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.882254] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.882274] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.882408] pci 0000:01:00.0: supports D1 D2 [ 2.882411] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.887510] cgroup: cgroup2: unknown option "nsdelegate" [ 2.894603] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.894628] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 2.894632] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.894638] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bi t] [ 2.894656] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bi t] [ 2.894672] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.894680] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.894684] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.894689] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] [ 2.894954] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.894958] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.894963] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.896249] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.896429] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.896446] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.903507] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL + XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybr id) [ 2.904274] systemd[1]: Detected architecture arm64. [ 2.910993] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.911056] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found va lid ethernet address 00:04:4b:e7:1b:52 from device tree [ 2.911473] r8168: This product is covered by one or more of the following pa tents: US6,570,884, US6,115,776, and US6,327,625. [ 2.911487] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, ple ase see . This is free software, and you are welcome to redistribute it un der certain conditions; see . [ 2.926577] systemd[1]: Set hostname to . [ 3.017081] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not sup port BPF/cgroup based firewalling. [ 3.017090] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warni ng is only shown for the first loaded unit using IP firewalling.) [ 3.131301] random: systemd: uninitialized urandom read (16 bytes read) [ 3.133131] systemd[1]: Set up automount Arbitrary Executable File Formats Fi le System Automount Point. [ 3.133248] random: systemd: uninitialized urandom read (16 bytes read) [ 3.134772] systemd[1]: Created slice User and Session Slice. [ 3.134806] random: systemd: uninitialized urandom read (16 bytes read) [ 3.134827] systemd[1]: Reached target Swap. [ 3.134991] systemd[1]: Started Forward Password Requests to Wall Directory W atch. [ 3.135785] systemd[1]: Created slice System Slice. [ 3.191823] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.317506] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 3.351268] systemd-journald[1939]: Received request to flush runtime journal from PID 1 [ 3.954519] tegra-xusb 70090000.xusb: entering ELPG [ 3.955531] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, spee d 0 [ 3.955719] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, spee d 0 [ 3.956616] tegra-xusb 70090000.xusb: entering ELPG done [ 4.355204] random: crng init done [ 4.358608] random: 7 urandom warning(s) missed due to ratelimiting [ 4.518313] using random self ethernet address [ 4.527316] using random host ethernet address [ 4.891665] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -214 7483647 forced to -127000 [ 4.891688] cpu-throttle-alert cooling device registered. [ 4.891942] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -214 7483647 forced to -127000 [ 4.891958] gpu-throttle-alert cooling device registered. [ 4.892118] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -214 7483647 forced to -127000 [ 4.892130] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -214 7483647 forced to -127000 [ 4.892142] hot-surface-alert cooling device registered. [ 5.301963] Mass Storage Function, version: 2009/09/11 [ 5.301969] LUN: removable file: (no medium) [ 5.307559] using random self ethernet address [ 5.318217] using random host ethernet address [ 5.372779] rndis0: HOST MAC f6:e0:3a:30:8b:60 [ 5.372996] rndis0: MAC f6:e0:3a:30:8b:61 [ 5.373543] usb0: HOST MAC f6:e0:3a:30:8b:62 [ 5.373569] usb0: MAC f6:e0:3a:30:8b:63 [ 5.373597] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 5.377785] l4tbr0: port 1(rndis0) entered blocking state [ 5.377790] l4tbr0: port 1(rndis0) entered disabled state [ 5.378230] device rndis0 entered promiscuous mode [ 5.392856] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 5.403382] l4tbr0: port 2(usb0) entered blocking state [ 5.403386] l4tbr0: port 2(usb0) entered disabled state [ 5.403555] device usb0 entered promiscuous mode [ 5.420611] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 5.629039] android_work: did not send uevent (0 0 (null)) [ 5.661656] android_work: sent uevent USB_STATE=CONNECTED [ 5.753698] configfs-gadget gadget: high-speed config #1: c [ 5.753730] tegra-xudc-new 700d0000.xudc: ep 5 (type: 3, dir: in) enabled [ 5.753747] tegra-xudc-new 700d0000.xudc: ep 3 (type: 2, dir: in) enabled [ 5.753761] tegra-xudc-new 700d0000.xudc: ep 2 (type: 2, dir: out) enabled [ 5.753862] tegra-xudc-new 700d0000.xudc: ep 9 (type: 3, dir: in) enabled [ 5.753877] tegra-xudc-new 700d0000.xudc: ep 7 (type: 2, dir: in) enabled [ 5.753892] tegra-xudc-new 700d0000.xudc: ep 4 (type: 2, dir: out) enabled [ 5.753928] tegra-xudc-new 700d0000.xudc: ep 15 (type: 3, dir: in) enabled [ 5.753947] tegra-xudc-new 700d0000.xudc: ep 11 (type: 2, dir: in) enabled [ 5.753970] tegra-xudc-new 700d0000.xudc: ep 6 (type: 2, dir: out) enabled [ 5.754007] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 5.754159] android_work: sent uevent USB_STATE=CONFIGURED [ 6.085705] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.087102] eth0: 0xffffff800aaaa000, 00:04:4b:e7:1b:52, IRQ 407 [ 6.137158] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.228512] zram: Added device: zram0 [ 6.231439] zram: Added device: zram1 [ 6.232567] zram: Added device: zram2 [ 6.236744] zram: Added device: zram3 [ 6.265695] zram0: detected capacity change from 0 to 519585792 [ 6.332170] Adding 507404k swap on /dev/zram0. Priority:5 extents:1 across:5 07404k SS [ 6.345113] zram1: detected capacity change from 0 to 519585792 [ 6.379431] Adding 507404k swap on /dev/zram1. Priority:5 extents:1 across:5 07404k SS [ 6.389965] zram2: detected capacity change from 0 to 519585792 [ 6.425868] Adding 507404k swap on /dev/zram2. Priority:5 extents:1 across:5 07404k SS [ 6.432199] zram3: detected capacity change from 0 to 519585792 [ 6.452602] Adding 507404k swap on /dev/zram3. Priority:5 extents:1 across:5 07404k SS [ 10.627584] Bridge firewalling registered [ 10.651771] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 10.807182] l4tbr0: port 1(rndis0) entered blocking state [ 10.807188] l4tbr0: port 1(rndis0) entered forwarding state [ 10.808065] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 10.808085] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 11.090861] Netfilter messages via NETLINK v0.30. [ 11.118834] ctnetlink v0.93: registering with nfnetlink. [ 11.209848] tegradc tegradc.0: blank - powerdown [ 11.209859] tegradc tegradc.1: blank - powerdown [ 11.342757] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 12.119627] fuse init (API version 7.26) [ 15.685201] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.685212] Bluetooth: BNEP socket layer initialized [ 33.909224] vdd-fan: disabling [ 33.909272] vdd-usb-vbus: disabling [ 33.909305] vdd-usb-vbus2: disabling [ 33.909414] vddio-sdmmc3-ap: disabling [ 33.909812] avdd-io-edp-1v05: disabling [ 33.909846] vdd-usb-hub-en: disabling tafir@nano:~$