[0000.063] I> MB1 (version: 1.2.0.0-t234-54845784-562369e5)
[0000.069] I> t234-A01-0-Silicon (0x12347) Prod
[0000.073] I> Boot-mode : Coldboot
[0000.076] I> Entry timestamp: 0x00000000
[0000.080] I> last_boot_error: 0x0
[0000.083] I> BR-BCT: preprod_dev_sign: 0
[0000.087] I> rst_source: 0x0, rst_level: 0x0
[0000.091] I> Task: SE error check
[0000.094] I> Task: Bootchain select WAR set
[0000.098] I> Task: Enable SLCG
[0000.101] I> Task: CRC check
[0000.104] I> Skip FUSE records CRC check as records_integrity fuse is not burned
[0000.111] I> Task: Initialize MB2 params
[0000.115] I> MB2-params @ 0x40060000
[0000.118] I> Task: Crypto init
[0000.121] I> Task: Perform MB1 KAT tests
[0000.125] I> Task: NVRNG health check
[0000.129] I> NVRNG: Health check success
[0000.133] I> Task: MSS Bandwidth limiter settings for iGPU clients
[0000.139] I> Task: Enabling and initialization of Bandwidth limiter
[0000.145] I> No request to configure MBWT settings for any PC!
[0000.150] I> Task: Secure debug controls
[0000.154] I> Task: strap war set
[0000.157] I> Task: Initialize SOC Therm
[0000.161] I> Task: Program NV master stream id
[0000.165] I> Task: Verify boot mode
[0000.171] I> Task: Alias fuses
[0000.174] W> FUSE_ALIAS: Fuse alias on production fused part is not supported.
[0000.181] I> Task: Print SKU type
[0000.184] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0
[0000.190] I> FUSE_OPT_GPC_DISABLE = 0x00000000
[0000.194] I> FUSE_OPT_TPC_DISABLE = 0x00000080
[0000.198] I> FUSE_OPT_DLA_DISABLE = 0x00000000
[0000.203] I> FUSE_OPT_PVA_DISABLE = 0x00000000
[0000.207] I> FUSE_OPT_NVENC_DISABLE = 0x00000000
[0000.211] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000
[0000.216] I> FUSE_OPT_FSI_DISABLE = 0x00000000
[0000.220] I> FUSE_OPT_EMC_DISABLE = 0x00000000
[0000.224] I> FUSE_BOOTROM_PATCH_VERSION = 0x7
[0000.228] I> FUSE_PSCROM_PATCH_VERSION = 0x7
[0000.233] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2
[0000.237] I> FUSE_SKU_INFO_0 = 0xd2
[0000.240] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS 
[0000.244] I> FUSE_PACKAGE_INFO_0 = 0x2
[0000.248] I> SKU: Prod
[0000.250] I> Task: Boost clocks
[0000.253] I> Initializing PLLC2 for AXI_CBB.
[0000.257] I> AXI_CBB : src = 35, divisor = 0
[0000.261] I> Task: Voltage monitor
[0000.265] I> VMON: Vmon re-calibration and fine tuning done
[0000.270] I> Task: UPHY init
[0000.275] I> HSIO UPHY init done
[0000.278] W> Skipping GBE UPHY config
[0000.281] I> Task: Boot device init
[0000.285] I> Boot_device: QSPI_FLASH instance: 0
[0000.289] I> Qspi clock source : pllc_out0
[0000.294] I> QSPI Flash: Macronix 64MB
[0000.297] I> QSPI-0l initialized successfully
[0000.301] I> Task: TSC init
[0000.304] I> Task: Load membct
[0000.307] I> RAM_CODE 0x4000481
[0000.310] I> Loading MEMBCT 
[0000.313] I> Slot: 0
[0000.315] I> Binary[2] block-3840 (partition size: 0x40000)
[0000.320] I> Binary name: MEM-BCT-2
[0000.324] I> Size of crypto header is 8192
[0000.328] I> Size of crypto header is 8192
[0000.332] I> strt_pg_num(3840) num_of_pgs(16) read_buf(0x40050000)
[0000.338] I> BCH of MEM-BCT-2 read from storage
[0000.342] I> BCH address is : 0x40050000
[0000.346] I> MEM-BCT-2 header integrity check is success
[0000.351] I> Binary magic in BCH component 2 is MEM2
[0000.356] I> component binary type is 2
[0000.360] I> strt_pg_num(4086) num_of_pgs(115) read_buf(0x40040000)
[0000.367] I> MEM-BCT-2 binary is read from storage
[0000.371] I> MEM-BCT-2 binary integrity check is success
[0000.377] I> Binary MEM-BCT-2 loaded successfully at 0x40040000 (0xe580)
[0000.383] I> RAM_CODE 0x4000481
[0000.389] I> RAM_CODE 0x4000481
[0000.392] I> Task: Load Page retirement list
[0000.396] I> Task: SDRAM params override
[0000.400] I> Task: Save mem-bct info
[0000.404] I> Task: Carveout allocate
[0000.407] I> RCM blob carveout will not be allocated
[0000.412] I> Update CCPLEX IST carveout from MB1-BCT
[0000.417] I> ECC region[0]: Start:0x0, End:0x0
[0000.421] I> ECC region[1]: Start:0x0, End:0x0
[0000.425] I> ECC region[2]: Start:0x0, End:0x0
[0000.429] I> ECC region[3]: Start:0x0, End:0x0
[0000.434] I> ECC region[4]: Start:0x0, End:0x0
[0000.438] I> Non-ECC region[0]: Start:0x80000000, End:0x80000000
[0000.444] I> Non-ECC region[1]: Start:0x0, End:0x0
[0000.449] I> Non-ECC region[2]: Start:0x0, End:0x0
[0000.453] I> Non-ECC region[3]: Start:0x0, End:0x0
[0000.458] I> Non-ECC region[4]: Start:0x0, End:0x0
[0000.470] E> BL_CARVEOUT: Failed to allocate memory of size 0x36800000 for CO:44.
[0000.477] C> Task 0x20 failed (err: 0x49490303)
[0000.481] E> Top caller module: BL_CARVEOUT, error module: BL_CARVEOUT, reason: 0x03, aux_info: 0x03
[0000.490] C> Boot Info Table status dump :
01111111001110001111111111111111
[0000.064] I> MB1 (version: 1.2.0.0-t234-54845784-562369e5)
[0000.069] I> t234-A01-0-Silicon (0x12347) Prod
[0000.073] I> Boot-mode : Coldboot
[0000.076] I> Entry timestamp: 0x00000000
[0000.080] I> last_boot_error: 0x49490303
[0000.084] I> BR-BCT: preprod_dev_sign: 0
[0000.088] I> rst_source: 0x3, rst_level: 0x1
[0000.092] I> Task: SE error check
[0000.095] I> Task: Bootchain select WAR set
[0000.099] I> Task: Enable SLCG
[0000.102] I> Task: CRC check
[0000.105] I> Skip FUSE records CRC check as records_integrity fuse is not burned
[0000.112] I> Task: Initialize MB2 params
[0000.116] I> MB2-params @ 0x40060000
[0000.120] I> Task: Crypto init
[0000.122] I> Task: Perform MB1 KAT tests
[0000.126] I> Task: NVRNG health check
[0000.130] I> NVRNG: Health check success
[0000.134] I> Task: MSS Bandwidth limiter settings for iGPU clients
[0000.140] I> Task: Enabling and initialization of Bandwidth limiter
[0000.146] I> No request to configure MBWT settings for any PC!
[0000.151] I> Task: Secure debug controls
[0000.155] I> Task: strap war set
[0000.158] I> Task: Initialize SOC Therm
[0000.162] I> Task: Program NV master stream id
[0000.166] I> Task: Verify boot mode
[0000.172] I> Task: Alias fuses
[0000.176] W> FUSE_ALIAS: Fuse alias on production fused part is not supported.
[0000.183] I> Task: Print SKU type
[0000.186] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0
[0000.191] I> FUSE_OPT_GPC_DISABLE = 0x00000000
[0000.195] I> FUSE_OPT_TPC_DISABLE = 0x00000080
[0000.200] I> FUSE_OPT_DLA_DISABLE = 0x00000000
[0000.204] I> FUSE_OPT_PVA_DISABLE = 0x00000000
[0000.208] I> FUSE_OPT_NVENC_DISABLE = 0x00000000
[0000.213] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000
[0000.217] I> FUSE_OPT_FSI_DISABLE = 0x00000000
[0000.221] I> FUSE_OPT_EMC_DISABLE = 0x00000000
[0000.226] I> FUSE_BOOTROM_PATCH_VERSION = 0x7
[0000.230] I> FUSE_PSCROM_PATCH_VERSION = 0x7
[0000.234] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2
[0000.238] I> FUSE_SKU_INFO_0 = 0xd2
[0000.241] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS 
[0000.245] I> FUSE_PACKAGE_INFO_0 = 0x2
[0000.249] I> SKU: Prod
[0000.251] I> Task: Boost clocks
[0000.254] I> Initializing PLLC2 for AXI_CBB.
[0000.258] I> AXI_CBB : src = 35, divisor = 0
[0000.263] I> Task: Voltage monitor
[0000.266] I> VMON: Vmon re-calibration and fine tuning done
[0000.271] I> Task: UPHY init
[0000.276] I> HSIO UPHY init done
[0000.279] W> Skipping GBE UPHY config
[0000.283] I> Task: Boot device init
[0000.286] I> Boot_device: QSPI_FLASH instance: 0
[0000.291] I> Qspi clock source : pllc_out0
[0000.295] I> QSPI Flash: Macronix 64MB
[0000.298] I> QSPI-0l initialized successfully
[0000.303] I> Task: TSC init
[0000.305] I> Task: Load membct
[0000.308] I> RAM_CODE 0x4000481
[0000.311] I> Loading MEMBCT 
[0000.314] I> Slot: 1
[0000.316] I> Binary[2] block-66816 (partition size: 0x40000)
[0000.322] I> Binary name: MEM-BCT-2
[0000.325] I> Size of crypto header is 8192
[0000.329] I> Size of crypto header is 8192
[0000.333] I> strt_pg_num(66816) num_of_pgs(16) read_buf(0x40050000)
[0000.339] I> BCH of MEM-BCT-2 read from storage
[0000.344] I> BCH address is : 0x40050000
[0000.347] I> MEM-BCT-2 header integrity check is success
[0000.353] I> Binary magic in BCH component 2 is MEM2
[0000.357] I> component binary type is 2
[0000.361] I> strt_pg_num(67062) num_of_pgs(115) read_buf(0x40040000)
[0000.368] I> MEM-BCT-2 binary is read from storage
[0000.373] I> MEM-BCT-2 binary integrity check is success
[0000.378] I> Binary MEM-BCT-2 loaded successfully at 0x40040000 (0xe580)
[0000.385] I> RAM_CODE 0x4000481
[0000.390] I> RAM_CODE 0x4000481
[0000.394] I> Task: Load Page retirement list
[0000.398] I> Task: SDRAM params override
[0000.402] I> Task: Save mem-bct info
[0000.405] I> Task: Carveout allocate
[0000.409] I> RCM blob carveout will not be allocated
[0000.413] I> Update CCPLEX IST carveout from MB1-BCT
[0000.418] I> ECC region[0]: Start:0x0, End:0x0
[0000.422] I> ECC region[1]: Start:0x0, End:0x0
[0000.427] I> ECC region[2]: Start:0x0, End:0x0
[0000.431] I> ECC region[3]: Start:0x0, End:0x0
[0000.435] I> ECC region[4]: Start:0x0, End:0x0
[0000.440] I> Non-ECC region[0]: Start:0x80000000, End:0x80000000
[0000.445] I> Non-ECC region[1]: Start:0x0, End:0x0
[0000.450] I> Non-ECC region[2]: Start:0x0, End:0x0
[0000.455] I> Non-ECC region[3]: Start:0x0, End:0x0
[0000.459] I> Non-ECC region[4]: Start:0x0, End:0x0
[0000.470] E> BL_CARVEOUT: Failed to allocate memory of size 0x36800000 for CO:44.
[0000.478] C> Task 0x20 failed (err: 0x49490303)
[0000.482] E> Top caller module: BL_CARVEOUT, error module: BL_CARVEOUT, reason: 0x03, aux_info: 0x03
[0000.491] C> Boot Info Table status dump :
01111111001110001111111111111111