Jetson UEFI firmware (version 202210.3-67203e4 built on 2023-11-13T15:38:41+00:0 0) ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ** WARNING: Test Key is used. ** L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ��I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 10 initializing I/TC: Secondary CPU 10 switching to normal world boot I/TC: Secondary CPU 11 initializing I/TC: Secondary CPU 11 switching to normal world boot ��[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.120-tegra (root@799ecd9427d8) (aarch64-buildroot-linux-gn3 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: NVIDIA Orin NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x265b96f18 SMBIOS=0xffff0000 SMBIOS 3.0=0x2472b0000 MEMATTR=0x2 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002484d2818 to 0x00000002484d2850. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000025a800000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000273ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002467a7fff] [ 0.000000] node 0: [mem 0x00000002467a8000-0x0000000246a1cfff] [ 0.000000] node 0: [mem 0x0000000246a1d000-0x00000002471fffff] [ 0.000000] node 0: [mem 0x0000000247200000-0x00000002472bffff] [ 0.000000] node 0: [mem 0x00000002472c0000-0x000000024833ffff] [ 0.000000] node 0: [mem 0x0000000248340000-0x00000002483dffff] [ 0.000000] node 0: [mem 0x00000002483e0000-0x00000002483effff] [ 0.000000] node 0: [mem 0x00000002483f0000-0x000000024840ffff] [ 0.000000] node 0: [mem 0x0000000248410000-0x000000024843ffff] [ 0.000000] node 0: [mem 0x0000000248440000-0x000000024846ffff] [ 0.000000] node 0: [mem 0x0000000248470000-0x00000002484affff] [ 0.000000] node 0: [mem 0x00000002484b0000-0x00000002484cffff] [ 0.000000] node 0: [mem 0x00000002484d0000-0x00000002485affff] [ 0.000000] node 0: [mem 0x00000002485b0000-0x000000024878ffff] [ 0.000000] node 0: [mem 0x0000000248790000-0x000000024884ffff] [ 0.000000] node 0: [mem 0x0000000248850000-0x00000002488effff] [ 0.000000] node 0: [mem 0x00000002488f0000-0x000000024893ffff] [ 0.000000] node 0: [mem 0x0000000248940000-0x0000000248bbffff] [ 0.000000] node 0: [mem 0x0000000248bc0000-0x0000000248c5ffff] [ 0.000000] node 0: [mem 0x0000000248c60000-0x0000000248c6ffff] [ 0.000000] node 0: [mem 0x0000000248c70000-0x0000000248cbffff] [ 0.000000] node 0: [mem 0x0000000248cc0000-0x0000000248d5ffff] [ 0.000000] node 0: [mem 0x0000000248d60000-0x0000000248deffff] [ 0.000000] node 0: [mem 0x0000000248df0000-0x0000000248e8ffff] [ 0.000000] node 0: [mem 0x0000000248e90000-0x000000024936ffff] [ 0.000000] node 0: [mem 0x0000000249370000-0x000000024954ffff] [ 0.000000] node 0: [mem 0x0000000249550000-0x000000026ab2ffff] [ 0.000000] node 0: [mem 0x000000026ab30000-0x000000026ab7ffff] [ 0.000000] node 0: [mem 0x000000026ab80000-0x000000026ea0ffff] [ 0.000000] node 0: [mem 0x000000026ea10000-0x000000026ea1ffff] [ 0.000000] node 0: [mem 0x0000000272000000-0x0000000273ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000273ffffff] [ 0.000000] On node 0, zone Normal: 480 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90328 r8192 d32552 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2002208 [ 0.000000] Kernel command line: root=UUID=f0c0f6c7-f9a1-40d7-9c27-9d594ffdccde rw rootw [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 7369364K/8136832K available (18496K kernel code, 3166K rwdata, 7160K) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a17104s [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000698] Console: colour dummy device 80x25 [ 0.000742] Calibrating delay loop (skipped), value calculated using timer frequency.. 6) [ 0.000751] pid_max: default: 32768 minimum: 301 [ 0.000853] LSM: Security Framework initializing [ 0.000882] Yama: becoming mindful. [ 0.000903] SELinux: Initializing. [ 0.000992] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001007] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002148] rcu: Hierarchical SRCU implementation. [ 0.002247] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.002753] DTS File Name: /root/project/build/work/kernel/kernel/kernel-5.10/arch/arm64s [ 0.002756] DTB Build time: Nov 22 2023 06:42:21 [ 0.004130] Tegra Revision: A01 SKU: 0xd4 CPU Process: 0 SoC Process: 0 [ 0.004306] Remapping and enabling EFI services. [ 0.004785] smp: Bringing up secondary CPUs ... [ 0.033504] Detected PIPT I-cache on CPU1 [ 0.033540] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.033577] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.062246] Detected PIPT I-cache on CPU2 [ 0.062256] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.062271] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.090885] Detected PIPT I-cache on CPU3 [ 0.090894] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.090907] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.122171] Detected PIPT I-cache on CPU4 [ 0.122196] GICv3: CPU4: found redistributor 20200 region 0:0x000000000f580000 [ 0.122222] CPU4: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.151504] Detected PIPT I-cache on CPU5 [ 0.151514] GICv3: CPU5: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.151528] CPU5: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.151586] smp: Brought up 1 node, 6 CPUs [ 0.151598] SMP: Total of 6 processors activated. [ 0.151601] CPU features: detected: Privileged Access Never [ 0.151602] CPU features: detected: LSE atomic instructions [ 0.151604] CPU features: detected: User Access Override [ 0.151605] CPU features: detected: 32-bit EL0 Support [ 0.151607] CPU features: detected: Common not Private translations [ 0.151609] CPU features: detected: RAS Extension Support [ 0.151610] CPU features: detected: Data cache clean to the PoU not required for I/D cohe [ 0.151612] CPU features: detected: CRC32 instructions [ 0.151613] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.168464] spectre-bhb mitigation disabled by command line option [ 0.168467] spectre-bhb mitigation disabled by command line option [ 0.168469] spectre-bhb mitigation disabled by command line option [ 0.168471] spectre-bhb mitigation disabled by command line option [ 0.168472] spectre-bhb mitigation disabled by command line option [ 0.168474] spectre-bhb mitigation disabled by command line option [ 0.183789] CPU: All CPU(s) started at EL2 [ 0.185461] devtmpfs: initialized [ 0.203234] Registered cp15_barrier emulation handler [ 0.203242] Registered setend emulation handler [ 0.203247] KASLR enabled [ 0.203370] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: s [ 0.203380] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.205048] pinctrl core: initialized pinctrl subsystem [ 0.205515] SMBIOS 3.0.0 present. [ 0.205522] DMI: Unknown NVIDIA Orin NX Developer Kit/NVIDIA Orin NX Developer Kit, BIOS3 [ 0.205840] NET: Registered protocol family 16 [ 0.206662] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.206723] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.206774] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.206801] audit: initializing netlink subsys (disabled) [ 0.206888] audit: type=2000 audit(0.204:1): state=initialized audit_enabled=0 res=1 [ 0.207088] thermal_sys: Registered thermal governor 'step_wise' [ 0.207091] thermal_sys: Registered thermal governor 'power_allocator' [ 0.207095] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.207952] cpuidle: using governor menu [ 0.208060] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.208124] ASID allocator initialised with 32768 entries [ 0.208229] Serial: AMBA PL011 UART driver [ 0.210153] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.210181] Tegra reboot handler registered. [ 0.229618] mc: mapped MMIO address: 0xffff8000107b0000 -> 0x2c10000 [ 0.229632] mc: mapped MMIO address: 0xffff8000107d0000 -> 0x2c20000 [ 0.229638] mc: mapped MMIO address: 0xffff8000107f0000 -> 0x2c30000 [ 0.229646] mc: mapped MMIO address: 0xffff800010810000 -> 0x2c40000 [ 0.229651] mc: mapped MMIO address: 0xffff800010830000 -> 0x2c50000 [ 0.229656] mc: mapped MMIO address: 0xffff800010850000 -> 0x2b80000 [ 0.229661] mc: mapped MMIO address: 0xffff800010870000 -> 0x2b90000 [ 0.229666] mc: mapped MMIO address: 0xffff800010890000 -> 0x2ba0000 [ 0.229672] mc: mapped MMIO address: 0xffff8000108b0000 -> 0x2bb0000 [ 0.229676] mc: mapped MMIO address: 0xffff8000108d0000 -> 0x1700000 [ 0.229682] mc: mapped MMIO address: 0xffff8000108f0000 -> 0x1710000 [ 0.229687] mc: mapped MMIO address: 0xffff800010910000 -> 0x1720000 [ 0.229692] mc: mapped MMIO address: 0xffff800010930000 -> 0x1730000 [ 0.229697] mc: mapped MMIO address: 0xffff800010950000 -> 0x1740000 [ 0.229702] mc: mapped MMIO address: 0xffff800010970000 -> 0x1750000 [ 0.229707] mc: mapped MMIO address: 0xffff800010990000 -> 0x1760000 [ 0.229711] mc: mapped MMIO address: 0xffff8000109b0000 -> 0x1770000 [ 0.229719] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.229767] mc-err: mcerr ops are set to t23x [ 0.230475] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 68, base_baud = 0) is a SBSA [ 1.388175] printk: console [ttyAMA0] enabled [ 1.396601] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.403305] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 1.410003] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.416699] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.425360] ACPI: Interpreter disabled. [ 1.429580] ddr-vddq: supplied by vdd-5v [ 1.433676] ddr-vdd2: supplied by vdd-5v [ 1.437711] vdd-AO-1v2: supplied by vdd-5v [ 1.441913] vdd-3v3: supplied by vdd-5v [ 1.445861] vdd-rtc: supplied by vdd-AO-1v2 [ 1.450151] vdd-0v95-uphy: supplied by vdd-AO-1v2 [ 1.454966] vdd-0v95-hdmi: supplied by vdd-AO-1v2 [ 1.459904] vdd-1v8: supplied by vdd-3v3-sys [ 1.464270] vdd-3v3-AO: supplied by vdd-5v-sys [ 1.468812] vdd-av10-hub: supplied by vdd-5v-sys [ 1.473531] vdd-vbus-a: supplied by vdd-5v-sys [ 1.478074] vdd-vbus-b: supplied by vdd-5v-sys [ 1.482675] vdd-3v3-dp: supplied by vdd-3v3-sys [ 1.487551] iommu: Default domain type: Translated [ 1.492468] eventlib_kernel: keventlib is initialized, test id: 0 [ 1.498760] SCSI subsystem initialized [ 1.502593] usbcore: registered new interface driver usbfs [ 1.508086] usbcore: registered new interface driver hub [ 1.513405] usbcore: registered new device driver usb [ 1.518642] mc: Linux media interface: v0.10 [ 1.522915] videodev: Linux video capture interface: v2.00 [ 1.528547] pps_core: LinuxPPS API ver. 1 registered [ 1.533507] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.542639] PTP clock support registered [ 1.546783] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 1.553934] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 1.561580] Registered efivars operations [ 1.566117] FPGA manager framework [ 1.569544] Advanced Linux Sound Architecture Driver Initialized. [ 1.575901] Bluetooth: Core ver 2.22 [ 1.579483] NET: Registered protocol family 31 [ 1.583924] Bluetooth: HCI device and connection manager initialized [ 1.590279] Bluetooth: HCI socket layer initialized [ 1.595153] Bluetooth: L2CAP socket layer initialized [ 1.600205] Bluetooth: SCO socket layer initialized [ 1.605584] camchar: rtcpu character device driver loaded [ 1.611215] clocksource: Switched to clocksource arch_sys_counter [ 1.773867] VFS: Disk quotas dquot_6.6.0 [ 1.777840] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.785345] pnp: PnP ACPI: disabled [ 1.790827] la/ptsa driver initialized. [ 1.794737] NET: Registered protocol family 2 [ 1.799231] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.808022] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, li) [ 1.816566] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.824543] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.832442] TCP: Hash tables configured (established 65536 bind 65536) [ 1.839046] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.845850] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.853170] NET: Registered protocol family 1 [ 1.857742] RPC: Registered named UNIX socket transport module. [ 1.863671] RPC: Registered udp transport module. [ 1.868371] RPC: Registered tcp transport module. [ 1.873071] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.879513] PCI: CLS 0 bytes, default 64 [ 1.883541] Trying to unpack rootfs image as initramfs... [ 2.092371] Freeing initrd memory: 15040K [ 2.098378] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 2.106285] kvm [1]: IPA Size Limit: 48 bits [ 2.110577] kvm [1]: GICv3: no GICV resource entry [ 2.115366] kvm [1]: disabling GICv2 emulation [ 2.119825] kvm [1]: GIC system register CPU interface enabled [ 2.125713] kvm [1]: vgic interrupt IRQ9 [ 2.129732] kvm [1]: VHE mode initialized successfully [ 2.135506] Initialise system trusted keyrings [ 2.140033] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 2.148804] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.154987] NFS: Registering the id_resolver key type [ 2.160056] Key type id_resolver registered [ 2.164237] Key type id_legacy registered [ 2.168280] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.174984] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.182385] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.198518] NET: Registered protocol family 38 [ 2.202964] Key type asymmetric registered [ 2.207058] Asymmetric key parser 'x509' registered [ 2.211948] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239) [ 2.219398] io scheduler mq-deadline registered [ 2.223930] io scheduler kyber registered [ 2.231935] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 2.237535] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 2.243122] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 2.248707] tegra-pwm 32e0000.pwm: PWM clk can sleep in ops [ 2.255063] efifb: probing for efifb [ 2.258680] efifb: framebuffer at 0x279e00000, using 8640k, total 8640k [ 2.265300] efifb: mode is 1920x1080x32, linelength=8192, pages=1 [ 2.271391] efifb: scrolling: redraw [ 2.274959] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.283496] Console: switching to colour frame buffer device 240x67 [ 2.292502] fb0: EFI VGA frame buffer device [ 2.298529] tegra_dc_assign_hw_data: no matching compatible node [ 2.304537] tegradccommon module_init failed [ 2.308804] tegradc module_init failed [ 2.312806] EINJ: ACPI disabled. [ 2.317587] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 2.324469] tegra-pmc: ### PMC reset source: MAINSWRST [ 2.329609] tegra-pmc: ### PMC reset level: L1 [ 2.334048] tegra-pmc: ### PMC reset status reg: 0x2d [ 2.340373] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.972910] printk: console [ttyTCU0] enabled [ 3.977896] arm-smmu 12000000.iommu: probing hardware configuration... [ 3.984593] arm-smmu 12000000.iommu: SMMUv2 with: [ 3.989409] arm-smmu 12000000.iommu: stage 1 translation [ 3.994938] arm-smmu 12000000.iommu: stage 2 translation [ 4.000474] arm-smmu 12000000.iommu: nested translation [ 4.005924] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 4.013327] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 4.022379] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 4.029070] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.035753] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.043270] arm-smmu 10000000.iommu: probing hardware configuration... [ 4.049961] arm-smmu 10000000.iommu: SMMUv2 with: [ 4.054779] arm-smmu 10000000.iommu: stage 1 translation [ 4.060309] arm-smmu 10000000.iommu: stage 2 translation [ 4.065843] arm-smmu 10000000.iommu: nested translation [ 4.071289] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 4.078688] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 4.087725] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 4.094417] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.101101] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.108214] arm-smmu 8000000.iommu: probing hardware configuration... [ 4.114808] arm-smmu 8000000.iommu: SMMUv2 with: [ 4.119535] arm-smmu 8000000.iommu: stage 1 translation [ 4.124983] arm-smmu 8000000.iommu: stage 2 translation [ 4.130440] arm-smmu 8000000.iommu: nested translation [ 4.135794] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 4.143102] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 4.152048] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 4.158642] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.165240] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.172545] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 4.181974] tegra_profiler: version: 1.151, samples/io: 51/30 [ 4.187953] tegra_profiler: auth: init [ 4.192109] nvsciipc: loaded module [ 4.197258] tun: Universal TUN/TAP device driver, 1.6 [ 4.202914] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 4.210322] hns3: Copyright (c) 2017 Huawei Corporation. [ 4.215784] e1000e: Intel(R) PRO/1000 Network Driver [ 4.220874] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.226960] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.232490] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.238370] PPP generic driver version 2.4.2 [ 4.242791] PPP BSD Compression module registered [ 4.247611] PPP Deflate Compression module registered [ 4.252799] PPP MPPE Compression module registered [ 4.257735] usbcore: registered new interface driver r8152 [ 4.263358] usbcore: registered new interface driver asix [ 4.268898] usbcore: registered new interface driver ax88179_178a [ 4.275161] usbcore: registered new interface driver cdc_ether [ 4.281145] usbcore: registered new interface driver net1080 [ 4.286960] usbcore: registered new interface driver cdc_subset [ 4.293034] usbcore: registered new interface driver zaurus [ 4.298761] usbcore: registered new interface driver cdc_ncm [ 4.304568] usbcore: registered new interface driver aqc111 [ 4.310395] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.316745] ohci-pci: OHCI PCI platform driver [ 4.321307] ohci-platform: OHCI generic platform driver [ 4.326977] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 4.333303] usbcore: registered new interface driver uas [ 4.338779] usbcore: registered new interface driver usb-storage [ 4.345090] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 4.351151] mousedev: PS/2 mouse device common for all mice [ 4.356890] usbcore: registered new interface driver xpad [ 4.364285] tegra_rtc c2a0000.rtc: registered as rtc1 [ 4.369485] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.375858] i2c /dev entries driver [ 4.379553] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 4.385342] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 4.391018] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 4.396684] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 4.402354] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 4.408026] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 4.413694] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 4.419362] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 4.428369] device-mapper: uevent: version 1.0.3 [ 4.433191] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhatm [ 4.442823] sdhci: Secure Digital Host Controller Interface driver [ 4.449155] sdhci: Copyright(c) Pierre Ossman [ 4.453622] Synopsys Designware Multimedia Card Interface Driver [ 4.459860] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.466119] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 4.473631] tegra-bpmp bpmp: firmware: 029a50a8fb4897d35f94-925eece486b [ 4.482267] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 4.487882] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x82 [ 4.498835] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 4.506897] nvvrs-pseq-rtc nvvrs-pseq-rtc: setting system clock to 2024-03-15T13:21:15 U) [ 4.516541] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful ��debugfs initialized ��[ 5.620637] hid: raw HID events driver (C) Jiri Kosina [ 5.626477] usbcore: registered new interface driver usbhid [ 5.632210] usbhid: USB HID core driver [ 5.636584] tegra-dce d800000.dce: Adding to iommu group 3 [ 5.643762] dce: dce_ipc_channel_init:319 Invalid Channel State [0x0] for ch_type [2] [ 5.652636] tegra234-aon c000000.aon: Adding to iommu group 4 [ 5.659053] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB ] [ 5.664374] c000000.aon:hsp: probed [ 5.668023] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [0]. Ignor. [ 5.680452] tegra234-aon c000000.aon: init done [ 5.680829] tegra23x-psc e860000.psc: Adding to iommu group 5 [ 5.685133] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 5.691308] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 5.698022] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB ] [ 5.704329] tegra23x-psc e860000.psc: init done [ 5.713273] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [1] ... [ 5.713274] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignor. [ 5.713283] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignor. [ 5.718072] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 6 [ 5.726323] dce: dce_admin_setup_clients_ipc:529 Get queue info failed for [2] [ 5.726446] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB ] [ 5.735879] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 5.743867] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [3] ... [ 5.743868] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignor. [ 5.743877] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignor. [ 5.753874] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff si4 [ 5.758237] dce: dce_start_boot_flow:173 DCE_BOOT_DONE [ 5.767003] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x100 [ 5.827314] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x19000 [ 5.838478] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80 [ 5.850190] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX0 [ 5.862744] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX0 [ 5.875558] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x2000 [ 5.887732] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (115) [ 5.894534] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 5.902786] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.909754] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.909770] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=8676d25 [ 5.916722] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.916724] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.930198] t19x_cache tegra-cache: probed [ 5.935041] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 5.953402] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 5����.963419] optee: probi��I��ng for conduit method��/��. ��TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled ��[ 5.968004] optee: revision 3.21 (d8269f24) [ 6.026820] optee: dynamic shared memory is enabled [ 6.036254] optee: initialized driver [ 6.051230] nvpmodel: initialized successfully [ 6.055895] tegra_hv: get_hvd: not initialized yet [ 6.060834] user_ivc_mempool: hypervisor not present [ 6.066610] usbcore: registered new interface driver snd-usb-audio [ 6.073789] u32 classifier [ 6.076572] input device check on [ 6.080347] Actions configured [ 6.083998] Initializing XFRM netlink socket [ 6.088789] NET: Registered protocol family 10 [ 6.094786] Segment Routing with IPv6 [ 6.098595] NET: Registered protocol family 17 [ 6.103181] NET: Registered protocol family 15 [ 6.107788] bridge: filtering via arp/ip/ip6tables is no longer available by default. Up. [ 6.121452] Bluetooth: RFCOMM socket layer initialized [ 6.126752] Bluetooth: RFCOMM ver 1.11 [ 6.130610] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 6.136694] Bluetooth: HIDP socket layer initialized [ 6.142547] 9pnet: Installing 9P2000 support [ 6.147000] Key type dns_resolver registered [ 6.152099] registered taskstats version 1 [ 6.156321] Loading compiled-in X.509 certificates [ 6.171681] Loaded X.509 cert 'Build time autogenerated kernel key: 13021765542e26af592f' [ 6.182231] tegra194-pcie 14100000.pcie: Adding to iommu group 7 [ 6.195188] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.202421] tegra194-pcie 14160000.pcie: Adding to iommu group 8 [ 6.214745] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 6.221625] tegra194-pcie 141e0000.pcie: Adding to iommu group 9 [ 6.233549] tegra194-pcie 141e0000.pcie: Using GICv2m MSI allocator [ 6.240491] tegra194-pcie 140a0000.pcie: Adding to iommu group 10 [ 6.252722] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 6.260053] tegra194-pcie 140c0000.pcie: Adding to iommu group 11 [ 6.272145] tegra194-pcie 140c0000.pcie: Using GICv2m MSI allocator [ 6.303661] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 12 [ 6.315659] simple-framebuffer chosen:framebuffer: framebuffer at 0x279e00000, 0x870000 ) [ 6.327126] simple-framebuffer chosen:framebuffer: format=x8r8g8b8, mode=1920x1080x32, l2 [ 6.336705] fb0: switching to simple from EFI VGA [ 6.342190] Console: switching to colour dummy device 80x25 [ 6.351027] Console: switching to colour frame buffer device 240x67 [ 6.360208] simple-framebuffer chosen:framebuffer: fb0: simplefb registered! [ 6.367740] host1x 13e40000.host1x: Adding to iommu group 13 [ 6.396333] host1x 13e40000.host1x: initialized [ 6.401384] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 14 [ 6.409426] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iomm) [ 6.421425] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 15 [ 6.429465] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iomm) [ 6.441448] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 16 [ 6.449434] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iomm) [ 6.461408] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 17 [ 6.469396] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iomm) [ 6.481390] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 18 [ 6.489372] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iomm) [ 6.501319] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 19 [ 6.509285] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iomm) [ 6.521258] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 20 [ 6.529244] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iomm) [ 6.541221] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 21 [ 6.549213] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iomm) [ 6.561231] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 22 [ 6.569274] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iomm) [ 6.581229] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 23 [ 6.589232] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iomm) [ 6.601207] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 24 [ 6.609206] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iomm) [ 6.621187] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 25 [ 6.629163] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iomm) [ 6.641121] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 26 [ 6.649114] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iomm) [ 6.661095] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 27 [ 6.669075] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iomm) [ 6.681037] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 28 [ 6.689023] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iomm) [ 6.701006] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 29 [ 6.709035] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iomm) [ 6.721028] falcon 15340000.vic: Adding to iommu group 30 [ 6.731565] falcon 15340000.vic: initialized [ 6.736326] falcon 15380000.nvjpg: Adding to iommu group 31 [ 6.745666] falcon 15380000.nvjpg: initialized [ 6.750383] falcon 15540000.nvjpg1: Adding to iommu group 32 [ 6.759259] falcon 15540000.nvjpg1: initialized [ 6.764071] falcon 154c0000.nvenc: Adding to iommu group 33 [ 6.774035] falcon 154c0000.nvenc: initialized [ 6.778765] falcon 15a50000.ofa: Adding to iommu group 34 [ 6.787692] falcon 15a50000.ofa: initialized [ 6.792249] nvdec 15480000.nvdec: Adding to iommu group 35 [ 6.804552] nvdec 15480000.nvdec: initialized [ 6.809174] tsec 15500000.tsec: Adding to iommu group 36 [ 6.819077] tsec 15500000.tsec: initialized [ 6.826658] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.844283] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.860772] gpio-397 (camera-control-output-low): hogged as output/low [ 6.867518] gpio-486 (camera-control-output-low): hogged as output/low [ 6.874247] gpio-486 (camera-control-output-high): hogged as output/high [ 6.881175] gpio-487 (camera-control-output-high): hogged as output/high [ 6.889214] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 6.896584] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 6.903558] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.910054] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 6.916479] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.922749] tegra-pwm 32e0000.pwm: PWM clk can sleep in ops [ 6.930982] tegra194-isp5 14800000.isp: Adding to iommu group 37 [ 6.940275] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due toU [ 6.949918] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 6.956370] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00d [ 6.965592] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00d [ 6.975000] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 38 [ 6.983076] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 39 [ 6.991082] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled duU [ 7.001099] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 7.007908] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled duU [ 7.017862] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 7.024660] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled duU [ 7.034614] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 7.041453] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 40 [ 7.050062] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=1) [ 7.061446] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 41 [ 7.070062] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=1) [ 7.081433] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 42 [ 7.090048] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=2) [ 7.101413] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 43 [ 7.110016] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=2) [ 7.121372] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 44 [ 7.129990] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=2) [ 7.141353] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 45 [ 7.149956] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=2) [ 7.161326] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 46 [ 7.169978] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=2) [ 7.181353] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 47 [ 7.189971] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=2) [ 7.201345] pva 16000000.pva0: Adding to iommu group 48 [ 7.211937] pva 16000000.pva0: initialized [ 7.224659] nvdla 15880000.nvdla0: Adding to iommu group 49 [ 7.235413] nvdla 15880000.nvdla0: initialized [ 7.241859] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 2 [ 7.249086] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 7.256668] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 7.263300] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 7.270046] serial-tegra 3100000.serial: Adding to iommu group 2 [ 7.276610] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 17, base_baud = 0) is a TEGT [ 7.286385] serial-tegra 3110000.serial: Adding to iommu group 2 [ 7.292941] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 65, base_baud = 0) is a TEGT [ 7.302646] serial-tegra 3130000.serial: Adding to iommu group 2 [ 7.309154] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 66, base_baud = 0) is a TEGT [ 7.318770] serial-tegra 3140000.serial: Adding to iommu group 2 [ 7.325264] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 67, base_baud = 0) is a TEGT [ 7.352403] tegra-xusb 3610000.xhci: Firmware timestamp: 2023-02-10 03:48:10 UTC, Versioe [ 7.362161] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.367733] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 7.376382] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x000 [ 7.385990] tegra-xusb 3610000.xhci: irq 231, io mem 0x03610000 [ 7.392452] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.0 [ 7.400951] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.408385] usb usb1: Product: xHCI Host Controller [ 7.413393] usb usb1: Manufacturer: Linux 5.10.120-tegra xhci-hcd [ 7.419657] usb usb1: SerialNumber: 3610000.xhci [ 7.425144] hub 1-0:1.0: USB hub found [ 7.429023] hub 1-0:1.0: 4 ports detected [ 7.433395] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.438956] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 7.446743] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 7.454261] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.0 [ 7.462769] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.470204] usb usb2: Product: xHCI Host Controller [ 7.475208] usb usb2: Manufacturer: Linux 5.10.120-tegra xhci-hcd [ 7.481469] usb usb2: SerialNumber: 3610000.xhci [ 7.486747] hub 2-0:1.0: USB hub found [ 7.490614] hub 2-0:1.0: 4 ports detected [ 7.499345] pca953x 0-0020: supply vcc not found, using dummy regulator [ 7.506287] pca953x 0-0020: using no AI [ 7.510755] gpio-308 (GP0_CAM_PWDN): hogged as input [ 7.515963] gpio-309 (GP1_CAM_RST): hogged as input [ 7.521086] gpio-310 (GP2_CAM_FSYNC_IN): hogged as input [ 7.526649] gpio-311 (GP3_CAM_LOCK_OUT): hogged as input [ 7.532214] gpio-312 (GP4_CAM_ERR_OUTn): hogged as input [ 7.537771] gpio-313 (EMPTY): hogged as input [ 7.542356] gpio-314 (EMPTY): hogged as input [ 7.546941] gpio-315 (EMPTY): hogged as input [ 7.551891] gpiochip2: registered GPIOs 308 to 315 on 0-0020 [ 7.560381] pca953x 1-0020: supply vcc not found, using dummy regulator [ 7.567281] pca953x 1-0020: using no AI [ 7.573115] gpio-300 (COM1_EN): hogged as output/high [ 7.578946] gpio-301 (COM2_EN): hogged as output/high [ 7.584460] gpio-302 (IP808_GP_SMB_SEL): hogged as input [ 7.590246] gpio-303 (CAN_RST): hogged as input [ 7.595231] gpio-304 (CAN_TX_EN): hogged as input [ 7.600387] gpio-305 (EMPTY_TP59): hogged as input [ 7.605641] gpio-306 (PCIE1_CFG5): hogged as input [ 7.610886] gpio-307 (PCIE1_CFG6): hogged as input [ 7.616277] gpiochip3: registered GPIOs 300 to 307 on 1-0020 [ 7.622233] pca953x 1-0074: supply vcc not found, using dummy regulator [ 7.629103] pca953x 1-0074: using no AI [ 7.634470] gpio-284 (HUB1_VBUS_EN1): hogged as input [ 7.639986] gpio-285 (HUB1_VBUS_EN2): hogged as input [ 7.645501] gpio-286 (HUB1_VBUS_EN3): hogged as input [ 7.651015] gpio-287 (HUB1_VBUS_EN4): hogged as input [ 7.656530] gpio-288 (HUB2_VBUS_EN1): hogged as input [ 7.662046] gpio-289 (HUB2_VBUS_EN2): hogged as input [ 7.668312] gpio-290 (EXPA2_GPO_0): hogged as output/low [ 7.674409] gpio-291 (EXPA2_GPO_1): hogged as output/low [ 7.681380] gpio-292 (EXPA2_GPO_2): hogged as output/low [ 7.687474] gpio-293 (EXPA2_GPO_3): hogged as output/low [ 7.691478] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 7.693255] gpio-294 (EXPA2_GPI_0): hogged as input [ 7.705167] gpio-295 (EXPA2_GPI_1): hogged as input [ 7.710501] gpio-296 (EXPA2_GPI_2): hogged as input [ 7.715837] gpio-297 (EXPA2_GPI_3): hogged as input [ 7.721169] gpio-298 (EXPA2_GPO_4): hogged as input [ 7.726501] gpio-299 (EXPA2_GPO_5): hogged as input [ 7.731968] gpiochip4: registered GPIOs 284 to 299 on 1-0074 [ 7.749640] pca953x 7-0020: supply vcc not found, using dummy regulator [ 7.756532] pca953x 7-0020: using no AI [ 7.760869] gpio-276 (ISO_COM1_MODE0): hogged as input [ 7.766259] gpio-277 (ISO_COM1_MODE1): hogged as input [ 7.771653] gpio-278 (ISO_COM1_TERM): hogged as input [ 7.776950] gpio-279 (ISO_COM1_RTS_REV): hogged as input [ 7.782514] gpio-280 (ISO_COM2_MODE0): hogged as input [ 7.787899] gpio-281 (ISO_COM2_MODE1): hogged as input [ 7.793288] gpio-282 (ISO_COM2_TERM): hogged as input [ 7.798589] gpio-283 (ISO_COM2_RTS_REV): hogged as input [ 7.804541] gpiochip5: registered GPIOs 276 to 283 on 7-0020 [ 7.813835] i2c i2c-2: Added multiplexed i2c bus 9 [ 7.819432] i2c i2c-2: Added multiplexed i2c bus 10 [ 7.824452] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 7.831438] tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event prog [ 7.853345] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 199900z [ 7.856758] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=94.06 [ 7.866033] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 201800z [ 7.872860] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.884673] tegra194-cpufreq e000000.ccplex: probed with ICC, cl:3 [ 7.891294] usb 1-2: Product: USB2.1 Hub [ 7.891295] usb 1-2: Manufacturer: GenesysLogic [ 7.893277] hub 1-2:1.0: USB hub found [ 7.898335] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 7.902537] hub 1-2:1.0: 4 ports detected [ 7.907686] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 7.927886] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100 [ 7.936573] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000 [ 7.945263] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000 [ 7.979470] usb 2-2: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 8.012448] usb 2-2: New USB device found, idVendor=05e3, idProduct=0625, bcdDevice=94.06 [ 8.020857] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.028205] usb 2-2: Product: USB3.2 Hub [ 8.032230] usb 2-2: Manufacturer: GenesysLogic [ 8.040112] hub 2-2:1.0: USB hub found [ 8.045089] hub 2-2:1.0: 4 ports detected [ 8.135216] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 8.298613] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=94.06 [ 8.307036] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.314385] usb 1-3: Product: USB2.1 Hub [ 8.318406] usb 1-3: Manufacturer: GenesysLogic [ 8.324257] hub 1-3:1.0: USB hub found [ 8.328850] hub 1-3:1.0: 4 ports detected [ 8.419621] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 3 using tegra-xusb [ 8.452447] usb 2-3: New USB device found, idVendor=05e3, idProduct=0625, bcdDevice=94.06 [ 8.460890] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.468266] usb 2-3: Product: USB3.2 Hub [ 8.472320] usb 2-3: Manufacturer: GenesysLogic [ 8.480412] hub 2-3:1.0: USB hub found [ 8.485586] hub 2-3:1.0: 4 ports detected [ 8.683371] usb 1-3.2: new low-speed USB device number 4 using tegra-xusb [ 8.827224] usb 1-3.2: New USB device found, idVendor=045e, idProduct=0083, bcdDevice= 00 [ 8.835824] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.843338] usb 1-3.2: Product: Basic Optical Mouse [ 8.848340] usb 1-3.2: Manufacturer: Microsoft [ 8.860922] input: Microsoft Basic Optical Mouse as /devices/platform/3610000.xhci/usb1/0 [ 8.874961] hid-generic 0003:045E:0083.0001: input,hidraw0: USB HID v1.10 Mouse [Microso0 [ 8.995367] usb 1-3.3: new low-speed USB device number 5 using tegra-xusb [ 9.047540] tegra194-pcie 14100000.pcie: Phy link never came up [ 9.053711] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 9.060522] pci_bus 0001:00: root bus resource [bus 00-ff] [ 9.066156] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x3010) [ 9.075994] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus addr) [ 9.086815] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 9.094731] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 9.101057] pci 0001:00:00.0: PME# supported from D0 D3hot [ 9.114543] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 9.119930] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 2 [ 9.128890] pcieport 0001:00:00.0: Adding to iommu group 7 [ 9.134768] pcieport 0001:00:00.0: PME: Signaling with IRQ 55 [ 9.141019] pcieport 0001:00:00.0: AER: enabled with IRQ 55 [ 9.142041] random: crng init done [ 9.150481] pci_bus 0001:01: busn_res: [bus 01-ff] is released [ 9.153093] usb 1-3.3: New USB device found, idVendor=045e, idProduct=0780, bcdDevice= 10 [ 9.156582] pci 0001:00:00.0: Removing from iommu group 7 [ 9.165075] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.170629] pci_bus 0001:00: busn_res: [bus 00-ff] is released [ 9.178142] usb 1-3.3: Product: Comfort Curve Keyboard 3000 [ 9.185951] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 9.189885] usb 1-3.3: Manufacturer: Microsoft [ 9.197510] input: Microsoft Comfort Curve Keyboard 3000 as /devices/platform/3610000.xh1 [ 9.202385] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 9.221747] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100 [ 9.230416] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000 [ 9.239084] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000 [ 9.271906] hid-generic 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Keyboard [Micr0 [ 9.293184] input: Microsoft Comfort Curve Keyboard 3000 as /devices/platform/3610000.xh2 [ 9.363893] hid-generic 0003:045E:0780.0003: input,hidraw2: USB HID v1.11 Device [Micros1 [ 10.339226] tegra194-pcie 14160000.pcie: Phy link never came up [ 10.345374] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 10.352191] pci_bus 0004:00: root bus resource [bus 00-ff] [ 10.357823] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3) [ 10.367924] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus addr) [ 10.378742] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 10.386662] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 10.392986] pci 0004:00:00.0: PME# supported from D0 D3hot [ 10.406132] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 10.411519] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 2 [ 10.420454] pcieport 0004:00:00.0: Adding to iommu group 8 [ 10.426307] pcieport 0004:00:00.0: PME: Signaling with IRQ 57 [ 10.433029] pcieport 0004:00:00.0: AER: enabled with IRQ 57 [ 10.438990] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 10.445090] pci 0004:00:00.0: Removing from iommu group 8 [ 10.450650] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 10.458212] tegra194-pcie 141e0000.pcie: Using GICv2m MSI allocator [ 10.465496] tegra194-pcie 141e0000.pcie: host bridge /pcie@141e0000 ranges: [ 10.472676] tegra194-pcie 141e0000.pcie: IO 0x003e100000..0x003e1fffff -> 0x003e100 [ 10.481355] tegra194-pcie 141e0000.pcie: MEM 0x3228000000..0x322fffffff -> 0x0040000 [ 10.490034] tegra194-pcie 141e0000.pcie: MEM 0x2e40000000..0x3227ffffff -> 0x2e40000 [ 10.607375] tegra194-pcie 141e0000.pcie: Link up [ 10.614610] tegra194-pcie 141e0000.pcie: PCI host bridge to bus 0007:00 [ 10.621422] pci_bus 0007:00: root bus resource [bus 00-ff] [ 10.627056] pci_bus 0007:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3) [ 10.637152] pci_bus 0007:00: root bus resource [mem 0x3228000000-0x322fffffff] (bus addr) [ 10.647981] pci_bus 0007:00: root bus resource [mem 0x2e40000000-0x3227ffffff pref] [ 10.655894] pci 0007:00:00.0: [10de:229a] type 01 class 0x060400 [ 10.662187] pci 0007:00:00.0: PME# supported from D0 D3hot [ 10.671915] pci 0007:01:00.0: [8086:1521] type 00 class 0x020000 [ 10.678207] pci 0007:01:00.0: reg 0x10: [mem 0x00000000-0x0001ffff] [ 10.684768] pci 0007:01:00.0: reg 0x18: [io 0x0000-0x001f] [ 10.690549] pci 0007:01:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 10.698084] pci 0007:01:00.0: PME# supported from D0 D3hot [ 10.704049] pci 0007:01:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 10.711562] pci 0007:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] () [ 10.722183] pci 0007:01:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 10.729697] pci 0007:01:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] () [ 10.740863] pci 0007:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s P) [ 10.756563] pci 0007:01:00.1: [8086:1521] type 00 class 0x020000 [ 10.762849] pci 0007:01:00.1: reg 0x10: [mem 0x00000000-0x0001ffff] [ 10.769388] pci 0007:01:00.1: reg 0x18: [io 0x0000-0x001f] [ 10.775163] pci 0007:01:00.1: reg 0x1c: [mem 0x00000000-0x00003fff] [ 10.782628] pci 0007:01:00.1: PME# supported from D0 D3hot [ 10.788553] pci 0007:01:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 10.796051] pci 0007:01:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] () [ 10.806670] pci 0007:01:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 10.814167] pci 0007:01:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] () [ 10.825572] pci 0007:01:00.2: [8086:1521] type 00 class 0x020000 [ 10.831861] pci 0007:01:00.2: reg 0x10: [mem 0x00000000-0x0001ffff] [ 10.838399] pci 0007:01:00.2: reg 0x18: [io 0x0000-0x001f] [ 10.844174] pci 0007:01:00.2: reg 0x1c: [mem 0x00000000-0x00003fff] [ 10.851656] pci 0007:01:00.2: PME# supported from D0 D3hot [ 10.857586] pci 0007:01:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 10.865101] pci 0007:01:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] () [ 10.875718] pci 0007:01:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 10.883228] pci 0007:01:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] () [ 10.894642] pci 0007:01:00.3: [8086:1521] type 00 class 0x020000 [ 10.900934] pci 0007:01:00.3: reg 0x10: [mem 0x00000000-0x0001ffff] [ 10.907481] pci 0007:01:00.3: reg 0x18: [io 0x0000-0x001f] [ 10.913266] pci 0007:01:00.3: reg 0x1c: [mem 0x00000000-0x00003fff] [ 10.920742] pci 0007:01:00.3: PME# supported from D0 D3hot [ 10.926682] pci 0007:01:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 10.934203] pci 0007:01:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] () [ 10.944825] pci 0007:01:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 10.952345] pci 0007:01:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] () [ 10.967215] pci 0007:00:00.0: BAR 14: assigned [mem 0x3228000000-0x32280fffff] [ 10.974649] pci 0007:00:00.0: BAR 15: assigned [mem 0x2e40000000-0x2e400fffff 64bit pref] [ 10.983069] pci 0007:00:00.0: BAR 13: assigned [io 0x200000-0x200fff] [ 10.989795] pci 0007:01:00.0: BAR 0: assigned [mem 0x3228000000-0x322801ffff] [ 10.997163] pci 0007:01:00.1: BAR 0: assigned [mem 0x3228020000-0x322803ffff] [ 11.004535] pci 0007:01:00.2: BAR 0: assigned [mem 0x3228040000-0x322805ffff] [ 11.011899] pci 0007:01:00.3: BAR 0: assigned [mem 0x3228060000-0x322807ffff] [ 11.019262] pci 0007:01:00.0: BAR 3: assigned [mem 0x3228080000-0x3228083fff] [ 11.026630] pci 0007:01:00.0: BAR 7: assigned [mem 0x2e40000000-0x2e4001ffff 64bit pref] [ 11.034980] pci 0007:01:00.0: BAR 10: assigned [mem 0x2e40020000-0x2e4003ffff 64bit pref] [ 11.043424] pci 0007:01:00.1: BAR 3: assigned [mem 0x3228084000-0x3228087fff] [ 11.050794] pci 0007:01:00.1: BAR 7: assigned [mem 0x2e40040000-0x2e4005ffff 64bit pref] [ 11.059151] pci 0007:01:00.1: BAR 10: assigned [mem 0x2e40060000-0x2e4007ffff 64bit pref] [ 11.067596] pci 0007:01:00.2: BAR 3: assigned [mem 0x3228088000-0x322808bfff] [ 11.074957] pci 0007:01:00.2: BAR 7: assigned [mem 0x2e40080000-0x2e4009ffff 64bit pref] [ 11.083308] pci 0007:01:00.2: BAR 10: assigned [mem 0x2e400a0000-0x2e400bffff 64bit pref] [ 11.091760] pci 0007:01:00.3: BAR 3: assigned [mem 0x322808c000-0x322808ffff] [ 11.099120] pci 0007:01:00.3: BAR 7: assigned [mem 0x2e400c0000-0x2e400dffff 64bit pref] [ 11.107469] pci 0007:01:00.3: BAR 10: assigned [mem 0x2e400e0000-0x2e400fffff 64bit pref] [ 11.115912] pci 0007:01:00.0: BAR 2: assigned [io 0x200000-0x20001f] [ 11.122562] pci 0007:01:00.1: BAR 2: assigned [io 0x200020-0x20003f] [ 11.129212] pci 0007:01:00.2: BAR 2: assigned [io 0x200040-0x20005f] [ 11.135864] pci 0007:01:00.3: BAR 2: assigned [io 0x200060-0x20007f] [ 11.142519] pci 0007:00:00.0: PCI bridge to [bus 01-ff] [ 11.147887] pci 0007:00:00.0: bridge window [io 0x200000-0x200fff] [ 11.154518] pci 0007:00:00.0: bridge window [mem 0x3228000000-0x32280fffff] [ 11.161866] pci 0007:00:00.0: bridge window [mem 0x2e40000000-0x2e400fffff 64bit pref] [ 11.170196] pci 0007:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 2 [ 11.178939] pci 0007:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 2 [ 11.187677] pci 0007:01:00.1: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 2 [ 11.196417] pci 0007:01:00.2: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 2 [ 11.205151] pci 0007:01:00.3: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 2 [ 11.214068] pcieport 0007:00:00.0: Adding to iommu group 9 [ 11.219910] pcieport 0007:00:00.0: PME: Signaling with IRQ 59 [ 11.226548] pcieport 0007:00:00.0: AER: enabled with IRQ 59 [ 11.232590] igb 0007:01:00.0: Adding to iommu group 9 [ 11.237982] igb 0007:01:00.0: enabling device (0000 -> 0002) [ 11.307024] igb 0007:01:00.0: added PHC on eth0 [ 11.311686] igb 0007:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 11.318760] igb 0007:01:00.0: eth0: (PCIe:5.0Gb/s:Width x1) 74:fe:48:87:d7:c9 [ 11.326164] igb 0007:01:00.0: eth0: PBA No: 106100-000 [ 11.331443] igb 0007:01:00.0: Using MSI-X interrupts. 6 rx queue(s), 6 tx queue(s) [ 11.339519] igb 0007:01:00.1: Adding to iommu group 9 [ 11.344938] igb 0007:01:00.1: enabling device (0000 -> 0002) [ 11.412787] igb 0007:01:00.1: added PHC on eth1 [ 11.417456] igb 0007:01:00.1: Intel(R) Gigabit Ethernet Network Connection [ 11.424529] igb 0007:01:00.1: eth1: (PCIe:5.0Gb/s:Width x1) 74:fe:48:87:d7:ca [ 11.431953] igb 0007:01:00.1: eth1: PBA No: 106100-000 [ 11.437234] igb 0007:01:00.1: Using MSI-X interrupts. 6 rx queue(s), 6 tx queue(s) [ 11.445310] igb 0007:01:00.2: Adding to iommu group 9 [ 11.450717] igb 0007:01:00.2: enabling device (0000 -> 0002) [ 11.518784] igb 0007:01:00.2: added PHC on eth2 [ 11.523453] igb 0007:01:00.2: Intel(R) Gigabit Ethernet Network Connection [ 11.530524] igb 0007:01:00.2: eth2: (PCIe:5.0Gb/s:Width x1) 74:fe:48:87:d7:cb [ 11.537951] igb 0007:01:00.2: eth2: PBA No: 106100-000 [ 11.543234] igb 0007:01:00.2: Using MSI-X interrupts. 6 rx queue(s), 6 tx queue(s) [ 11.551296] igb 0007:01:00.3: Adding to iommu group 9 [ 11.556701] igb 0007:01:00.3: enabling device (0000 -> 0002) [ 11.624775] igb 0007:01:00.3: added PHC on eth3 [ 11.629445] igb 0007:01:00.3: Intel(R) Gigabit Ethernet Network Connection [ 11.636518] igb 0007:01:00.3: eth3: (PCIe:5.0Gb/s:Width x1) 74:fe:48:87:d7:cc [ 11.643935] igb 0007:01:00.3: eth3: PBA No: 106100-000 [ 11.649214] igb 0007:01:00.3: Using MSI-X interrupts. 6 rx queue(s), 6 tx queue(s) [ 11.657806] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 11.665079] tegra194-pcie 140c0000.pcie: Using GICv2m MSI allocator [ 11.673072] tegra194-pcie 140c0000.pcie: host bridge /pcie@140c0000 ranges: [ 11.680246] tegra194-pcie 140c0000.pcie: IO 0x002c100000..0x002c1fffff -> 0x002c100 [ 11.688932] tegra194-pcie 140c0000.pcie: MEM 0x3828000000..0x382fffffff -> 0x0040000 [ 11.697612] tegra194-pcie 140c0000.pcie: MEM 0x3540000000..0x3827ffffff -> 0x3540000 [ 11.811216] tegra194-pcie 140c0000.pcie: Link up [ 11.815997] [RCE] WARNING: core/hsp/hsp-vm.c:283 [camrtc_hsp_full_ss_isr] "VM0 issued IV" [ 11.828180] tegra194-pcie 140c0000.pcie: PCI host bridge to bus 0009:00 [ 11.834996] pci_bus 0009:00: root bus resource [bus 00-ff] [ 11.840627] pci_bus 0009:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x2) [ 11.850737] pci_bus 0009:00: root bus resource [mem 0x3828000000-0x382fffffff] (bus addr) [ 11.861568] pci_bus 0009:00: root bus resource [mem 0x3540000000-0x3827ffffff pref] [ 11.869470] pci 0009:00:00.0: [10de:229c] type 01 class 0x060400 [ 11.875763] pci 0009:00:00.0: PME# supported from D0 D3hot [ 11.885493] pci 0009:01:00.0: [1987:5013] type 00 class 0x010802 [ 11.891839] pci 0009:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 11.900031] pci 0009:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s P) [ 11.919101] pci 0009:00:00.0: BAR 14: assigned [mem 0x3828000000-0x38280fffff] [ 11.926519] pci 0009:01:00.0: BAR 0: assigned [mem 0x3828000000-0x3828003fff 64bit] [ 11.934457] pci 0009:00:00.0: PCI bridge to [bus 01-ff] [ 11.939816] pci 0009:00:00.0: bridge window [mem 0x3828000000-0x38280fffff] [ 11.947147] pci 0009:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 2 [ 11.955882] pci 0009:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 2 [ 11.964809] pcieport 0009:00:00.0: Adding to iommu group 11 [ 11.970729] pcieport 0009:00:00.0: PME: Signaling with IRQ 63 [ 11.977374] pcieport 0009:00:00.0: AER: enabled with IRQ 63 [ 11.983400] nvme 0009:01:00.0: Adding to iommu group 11 [ 11.989192] nvme nvme0: pci function 0009:01:00.0 [ 11.994230] nvme 0009:01:00.0: enabling device (0000 -> 0002) [ 11.994359] vdd-3v3-sd: supplied by vdd-3v3 [ 12.004819] irq: IRQ324: trimming hierarchy from :pmc@c360000 [ 12.011374] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: role 0/2, gpios: i1 [ 12.013438] tegra194-isp5 14800000.isp: initialized [ 12.016127] nvme nvme0: 6/0/0 default/read/poll queues [ 12.018758] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 [ 12.041409] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 12.047845] (NULL device *): fops function table already registered [ 12.055243] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 12.062042] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 12.068874] irq: IRQ331: trimming hierarchy from :interrupt-controller@f400000-1 [ 12.184133] tegra194-pcie 140a0000.pcie: host bridge /pcie@140a0000 ranges: [ 12.191302] tegra194-pcie 140a0000.pcie: IO 0x002a100000..0x002a1fffff -> 0x002a100 [ 12.199992] tegra194-pcie 140a0000.pcie: MEM 0x3528000000..0x352fffffff -> 0x0040000 [ 12.208668] tegra194-pcie 140a0000.pcie: MEM 0x3240000000..0x3527ffffff -> 0x3240000 [ 12.323368] tegra194-pcie 140a0000.pcie: Link up [ 12.330279] tegra194-pcie 140a0000.pcie: PCI host bridge to bus 0008:00 [ 12.337092] pci_bus 0008:00: root bus resource [bus 00-ff] [ 12.342726] pci_bus 0008:00: root bus resource [io 0x400000-0x4fffff] (bus address [0x2) [ 12.352836] pci_bus 0008:00: root bus resource [mem 0x3528000000-0x352fffffff] (bus addr) [ 12.363667] pci_bus 0008:00: root bus resource [mem 0x3240000000-0x3527ffffff pref] [ 12.371588] pci 0008:00:00.0: [10de:229c] type 01 class 0x060400 [ 12.377898] pci 0008:00:00.0: PME# supported from D0 D3hot [ 12.387750] pci 0008:01:00.0: [10ec:8168] type 00 class 0x020000 [ 12.394072] pci 0008:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 12.399983] pci 0008:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 12.407083] pci 0008:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 12.415084] pci 0008:01:00.0: supports D1 D2 [ 12.419480] pci 0008:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 12.430626] pci 0008:00:00.0: BAR 14: assigned [mem 0x3528000000-0x35280fffff] [ 12.438058] pci 0008:00:00.0: BAR 13: assigned [io 0x400000-0x400fff] [ 12.444776] pci 0008:01:00.0: BAR 4: assigned [mem 0x3528000000-0x3528003fff 64bit] [ 12.452748] pci 0008:01:00.0: BAR 2: assigned [mem 0x3528004000-0x3528004fff 64bit] [ 12.460720] pci 0008:01:00.0: BAR 0: assigned [io 0x400000-0x4000ff] [ 12.467375] pci 0008:00:00.0: PCI bridge to [bus 01-ff] [ 12.472746] pci 0008:00:00.0: bridge window [io 0x400000-0x400fff] [ 12.479378] pci 0008:00:00.0: bridge window [mem 0x3528000000-0x35280fffff] [ 12.486727] pci 0008:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 2 [ 12.495474] pci 0008:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 2 [ 12.504436] pcieport 0008:00:00.0: Adding to iommu group 10 [ 12.510404] pcieport 0008:00:00.0: PME: Signaling with IRQ 61 [ 12.517153] pcieport 0008:00:00.0: AER: enabled with IRQ 61 [ 12.524308] irq: IRQ333: trimming hierarchy from :pmc@c360000 [ 12.530313] irq: IRQ334: trimming hierarchy from :interrupt-controller@f400000-1 [ 12.537996] input: gpio-keys as /devices/platform/gpio-keys/input/input3 [ 12.545314] tegra-se-nvhost 15810000.se: Adding to iommu group 50 [ 12.551947] tegra-se-nvhost 15810000.se: initialized [ 12.565888] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 12.572256] tegra-se-nvhost 15820000.se: Adding to iommu group 51 [ 12.578780] tegra-se-nvhost 15820000.se: initialized [ 12.584813] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 12.591179] tegra-se-nvhost 15840000.se: Adding to iommu group 52 [ 12.597704] tegra-se-nvhost 15840000.se: initialized [ 12.606811] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 12.613632] tegra_actmon d230000.actmon: in actmon_register()... [ 12.619966] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 12.626517] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 12.634950] hvc_sysfs: hypervisor is not present [ 12.672031] ALSA device list: [ 12.675092] No soundcards found. [ 12.679235] Freeing unused kernel memory: 3968K [ 12.683938] Run /init as init process [INFO] Starting custom script in initrd. [ 12.721154] libata: module verification failed: signature and/or required key missing - l [ 14.240117] usbcore: registered new interface driver ums-realtek [INFO] Please keep clicking F2 or DEL to open boot menu before 6 secs timeout: [INFO] Please keep clicking F2 or DEL to open boot menu before 5 secs timeout: [INFO] Please keep clicking F2 or DEL to open boot menu before 4 secs timeout: [INFO] Please keep clicking F2 or DEL to open boot menu before 3 secs timeout: [INFO] Please keep clicking F2 or DEL to open boot menu before 2 secs timeout: [INFO] Please keep clicking F2 or DEL to open boot menu before 1 secs timeout: [INFO] The booting process is continue. [ 20.817777] Root device found: UUID=f0c0f6c7-f9a1-40d7-9c27-9d594ffdccde [ 22.609157] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 24.156719] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 24.164620] ext4 filesystem being mounted at /mnt/mnt/crypt_UDA supports timestamps unti) [ 24.178867] Rootfs mounted over UUID=f0c0f6c7-f9a1-40d7-9c27-9d594ffdccde [ 24.195802] Switching from initrd to actual rootfs [ 24.370852] systemd[1]: systemd 245.4-4ubuntu3.21 running in system mode. (+PAM +AUDIT +) [ 24.394483] systemd[1]: Detected architecture arm64. [ 24.435263] systemd[1]: No hostname configured. [ 24.440054] systemd[1]: Set hostname to . [ 24.595252] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the l. [ 24.608281] systemd[1]: (This warning is only shown for the first unit using IP firewall) [ 24.617844] systemd[1]: Created slice system-modprobe.slice. [ 24.639479] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 24.659479] systemd[1]: Set up automount Arbitrary Executable File Formats File System A. [ 24.687291] systemd[1]: Reached target Slices. [ 24.707238] systemd[1]: Reached target Swap. [ 24.723500] systemd[1]: Listening on RPCbind Server Activation Socket. [ 24.747338] systemd[1]: Listening on fsck to fsckd communication Socket. [ 24.771295] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 24.795440] systemd[1]: Listening on Journal Audit Socket. [ 24.815331] systemd[1]: Listening on Journal Socket (/dev/log). [ 24.835351] systemd[1]: Listening on Journal Socket. [ 24.855347] systemd[1]: Listening on udev Control Socket. [ 24.879362] systemd[1]: Listening on udev Kernel Socket. [ 24.900372] systemd[1]: Mounting Huge Pages File System... [ 24.920260] systemd[1]: Mounting POSIX Message Queue File System... [ 24.940128] systemd[1]: Mounting Kernel Debug File System... [ 24.960121] systemd[1]: Mounting Kernel Trace File System... [ 24.984495] systemd[1]: Starting Journal Service... [ 25.008711] systemd[1]: Starting Set the console keyboard layout... [ 25.032441] systemd[1]: Starting Create list of static device nodes for the current kern. [ 25.060441] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 25.084408] systemd[1]: Starting Load Kernel Module efi_pstore... [ 25.108213] systemd[1]: Starting Load Kernel Module pstore_blk... [ 25.128199] systemd[1]: Starting Load Kernel Module pstore_zone... [ 25.152155] systemd[1]: Starting Load Kernel Module ramoops... [ 25.176139] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 25.204247] systemd[1]: Started Nameserver information manager. [ 25.227401] systemd[1]: Reached target Network (Pre). [ 25.247836] systemd[1]: Condition check resulted in Set Up Additional Binary Formats bei. [ 25.257181] systemd[1]: Condition check resulted in File System Check on Root Device bei. [ 25.268031] systemd[1]: Starting Load Kernel Modules... [ 25.281263] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 25.288651] nvmap_page_pool_init: Total RAM pages: 1912629 [ 25.294322] nvmap_page_pool_init: nvmap page pool size: 239078 pages (933 MB) [ 25.301725] nvmap_background_zero_thread: PP zeroing thread starting. [ 25.303059] systemd[1]: Starting Remount Root and Kernel File Systems... [ 25.312947] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 25.340402] systemd[1]: Starting udev Coldplug all Devices... [ 25.351744] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_0 [ 25.351744] [ 25.373137] systemd[1]: Started Journal Service. [ 25.651405] systemd-journald[465]: Received client request to flush runtime journal. [ 26.147162] nvidia: loading out-of-tree module taints kernel. [ 26.211555] rt5640 0-001c: Failed to reguest IRQ 0: -22 [ 26.217193] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 26.230341] imx219 9-0010: board setup failed [ 26.235436] imx219: probe of 9-0010 failed with error -121 [ 26.252455] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 26.272551] imx219 10-0010: board setup failed [ 26.279983] imx219: probe of 10-0010 failed with error -121 [ 26.844844] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7ff) [ 28.091497] using random self ethernet address [ 28.096164] using random host ethernet address [ 28.316097] CPU4: shutdown [ 28.376737] CPU5: shutdown [ 28.642312] using random self ethernet address [ 28.646979] using random host ethernet address [ 34.889432] Please complete system configuration setup on desktop to proceed... [ 56.495220] rcu: INFO: rcu_preempt self-detected stall on CPU [ 56.501158] rcu: 0-....: (5234 ticks this GP) idle=cc6/1/0x4000000000000002 softirq= [ 56.511137] rcu: ====For debug only: Start Printing Blocked Tasks==== [ 56.519438] task:jbd2/dm-0-8 state:D stack: 0 pid: 365 ppid: 2 flags:0x000008 [ 56.528020] Call trace: [ 56.530536] __switch_to+0xc8/0x120 [ 56.534120] __schedule+0x3d0/0x910 [ 56.537704] schedule+0x78/0x110 [ 56.541026] jbd2_journal_commit_transaction+0x230/0x1e10 [ 56.546570] kjournald2+0xc4/0x270 [ 56.550057] kthread+0x148/0x170 [ 56.553370] ret_from_fork+0x10/0x24 [ 56.557042] task:ext4lazyinit state:D stack: 0 pid: 367 ppid: 2 flags:0x000008 [ 56.565621] Call trace: [ 56.568130] __switch_to+0xc8/0x120 [ 56.571715] __schedule+0x3d0/0x910 [ 56.575293] schedule+0x78/0x110 [ 56.578607] schedule_timeout+0x184/0x340 [ 56.582725] io_schedule_timeout+0x2c/0x50 [ 56.586925] wait_for_completion_io_timeout+0x8c/0x110 [ 56.592212] submit_bio_wait+0x84/0xd0 [ 56.596061] blkdev_issue_zeroout+0x130/0x1e0 [ 56.600537] ext4_init_inode_table+0x290/0x8b0 [ 56.605096] ext4_lazyinit_thread+0x524/0x780 [ 56.609564] kthread+0x148/0x170 [ 56.612877] ret_from_fork+0x10/0x24 [ 56.616599] task:NetworkManager state:D stack: 0 pid: 1223 ppid: 1 flags:0x000000 [ 56.625178] Call trace: [ 56.627686] __switch_to+0xc8/0x120 [ 56.631268] __schedule+0x3d0/0x910 [ 56.634852] schedule+0x78/0x110 [ 56.638166] io_schedule+0x24/0xd0 [ 56.641658] wait_on_page_bit_common+0x170/0x3d0 [ 56.646398] generic_file_buffered_read+0x488/0xa40 [ 56.651408] generic_file_read_iter+0xf0/0x170 [ 56.655973] ext4_file_read_iter+0x5c/0x150 [ 56.660270] new_sync_read+0xfc/0x1a0 [ 56.664023] vfs_read+0x130/0x1c0 [ 56.667422] ksys_read+0x7c/0x110 [ 56.670827] __arm64_sys_read+0x28/0x40 [ 56.674766] el0_svc_common.constprop.0+0x80/0x1d0 [ 56.679691] do_el0_svc+0x38/0xb0 [ 56.683090] el0_svc+0x1c/0x30 [ 56.686220] el0_sync_handler+0xa8/0xb0 [ 56.690156] el0_sync+0x16c/0x180 [ 56.693564] task:nm-dispatcher state:D stack: 0 pid: 1096 ppid: 1 flags:0x000000 [ 56.702144] Call trace: [ 56.704657] __switch_to+0xc8/0x120 [ 56.708237] __schedule+0x3d0/0x910 [ 56.711821] schedule+0x78/0x110 [ 56.715134] io_schedule+0x24/0xd0 [ 56.718624] __lock_page_killable+0x144/0x2d0 [ 56.723096] filemap_fault+0xd8/0xa40 [ 56.726855] ext4_filemap_fault+0x3c/0x9a0 [ 56.731064] __do_fault+0x44/0x1e0 [ 56.734554] handle_mm_fault+0xb00/0x1020 [ 56.738670] do_page_fault+0x118/0x400 [ 56.742516] do_translation_fault+0x7c/0x90 [ 56.746805] do_mem_abort+0x54/0xb0 [ 56.750385] el0_ia+0x60/0xb0 [ 56.753430] el0_sync_handler+0x90/0xb0 [ 56.757364] el0_sync+0x16c/0x180 [ 56.760771] task:nvfancontrol state:D stack: 0 pid: 1210 ppid: 1 flags:0x000000 [ 56.769351] Call trace: [ 56.771857] __switch_to+0xc8/0x120 [ 56.775437] __schedule+0x3d0/0x910 [ 56.779017] schedule+0x78/0x110 [ 56.782328] schedule_timeout+0x184/0x340 [ 56.786444] wait_for_completion_timeout+0x8c/0x110 [ 56.791452] tegra_bpmp_transfer+0x198/0x370 [ 56.795839] 0xffffabaa84bd93ac [ 56.799061] of_thermal_get_temp+0x40/0x60 [ 56.803260] thermal_zone_get_temp+0x78/0x160 [ 56.807736] temp_show+0x40/0x90 [ 56.811054] dev_attr_show+0x40/0x80 [ 56.814726] sysfs_kf_seq_show+0x90/0x130 [ 56.818840] kernfs_seq_show+0x48/0x60 [ 56.822697] seq_read_iter+0x1d4/0x490 [ 56.826543] kernfs_fop_read_iter+0x154/0x1d0 [ 56.831022] new_sync_read+0xfc/0x1a0 [ 56.834776] vfs_read+0x130/0x1c0 [ 56.838177] ksys_read+0x7c/0x110 [ 56.841579] __arm64_sys_read+0x28/0x40 [ 56.845522] el0_svc_common.constprop.0+0x80/0x1d0 [ 56.850445] do_el0_svc+0x38/0xb0 [ 56.853844] el0_svc+0x1c/0x30 [ 56.856973] el0_sync_handler+0xa8/0xb0 [ 56.860912] el0_sync+0x16c/0x180 [ 56.864322] task:debconf-communi state:D stack: 0 pid: 1410 ppid: 1316 flags:0x000000 [ 56.872898] Call trace: [ 56.875405] __switch_to+0xc8/0x120 [ 56.878988] __schedule+0x3d0/0x910 [ 56.882570] schedule+0x78/0x110 [ 56.885882] io_schedule+0x24/0xd0 [ 56.889368] wait_on_page_bit+0x13c/0x270 [ 56.893480] wait_on_page_writeback+0x50/0x100 [ 56.898034] __filemap_fdatawait_range+0xa4/0x140 [ 56.902857] file_write_and_wait_range+0xac/0xe0 [ 56.907599] ext4_sync_file+0x1bc/0x420 [ 56.911539] vfs_fsync_range+0x50/0x90 [ 56.915389] do_fsync+0x4c/0x90 [ 56.918608] __arm64_sys_fsync+0x28/0x40 [ 56.922629] el0_svc_common.constprop.0+0x80/0x1d0 [ 56.927550] do_el0_svc+0x38/0xb0 [ 56.930948] el0_svc+0x1c/0x30 [ 56.934082] el0_sync_handler+0xa8/0xb0 [ 56.938013] el0_sync+0x16c/0x180 [ 56.941411] rcu: ====For debug only: End Printing Blocked Tasks==== [ 84.471219] watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [kworker/u12:3:168] [ 84.478915] Modules linked in: nvidia_modeset(OE) loop(E) snd_soc_tegra186_asrc(E) input) [ 84.479029] ums_realtek(E) ahci(E) libahci(E) libata(E) [ 84.576313] CPU: 0 PID: 168 Comm: kworker/u12:3 Tainted: G OE 5.10.120-teg2 [ 84.585052] Hardware name: Unknown NVIDIA Orin NX Developer Kit/NVIDIA Orin NX Developer3 [ 84.596752] Workqueue: 0x0 (devfreq_wq) [ 84.600771] pstate: 60c00009 (nZCv daif +PAN +UAO -TCO BTYPE=--) [ 84.606928] pc : _raw_spin_unlock_irq+0x30/0x60 [ 84.611570] lr : _raw_spin_unlock_irq+0x1c/0x60 [ 84.616210] sp : ffff800011cabcd0 [ 84.619604] x29: ffff800011cabcd0 x28: ffffabaadcc52680 [ 84.625048] x27: ffffabaadcf57000 x26: ffff1c35066bb2c0 [ 84.630497] x25: ffff1c35066bac40 x24: 0000000000000000 [ 84.635952] x23: ffffabaadc1352d4 x22: ffff1c35066bac40 [ 84.641393] x21: 0000000000000000 x20: ffffabaadcc52680 [ 84.646834] x19: ffff1c366e7b6e00 x18: 0000000000000000 [ 84.652284] x17: 0000000000000000 x16: 0000000000000000 [ 84.657733] x15: 0000000000000000 x14: 0000000000000000 [ 84.663173] x13: 0000000000000000 x12: 0000000000000000 [ 84.668618] x11: 0000000000000040 x10: 0000000000000ab0 [ 84.674068] x9 : ffff800011cabd20 x8 : ffff1c35066bb750 [ 84.679518] x7 : 000000000002e881 x6 : 0000000000000003 [ 84.684961] x5 : 00000000410fd420 x4 : 0000000000f0000f [ 84.690406] x3 : 0000000000000001 x2 : ffffabaadb0f0d70 [ 84.695858] x1 : ffff1c35066bac40 x0 : 00000000000000e0 [ 84.701316] Call trace: [ 84.703825] _raw_spin_unlock_irq+0x30/0x60 [ 84.708116] finish_task_switch+0x88/0x270 [ 84.712311] __schedule+0x3d4/0x910 [ 84.715882] schedule+0x78/0x110 [ 84.719200] worker_thread+0xc0/0x430 [ 84.722953] kthread+0x148/0x170 [ 84.726263] ret_from_fork+0x10/0x24 [ 84.729924] watchdog: ====For debug only: Start Printing Blocked Tasks==== [ 84.738736] task:kworker/2:9 state:D stack: 0 pid: 156 ppid: 2 flags:0x000008 [ 84.747305] Workqueue: rcu_gp wait_rcu_exp_gp [ 84.751772] Call trace: [ 84.754273] __switch_to+0xc8/0x120 [ 84.757848] __schedule+0x3d0/0x910 [ 84.761427] schedule+0x78/0x110 [ 84.764733] schedule_timeout+0x184/0x340 [ 84.768840] rcu_exp_wait_wake+0xe8/0x830 [ 84.772950] wait_rcu_exp_gp+0x2c/0x40 [ 84.776801] process_one_work+0x1c4/0x4a0 [ 84.780911] worker_thread+0x54/0x430 [ 84.784666] kthread+0x148/0x170 [ 84.787974] ret_from_fork+0x10/0x24 [ 84.791650] task:jbd2/dm-0-8 state:D stack: 0 pid: 365 ppid: 2 flags:0x000008 [ 84.800206] Call trace: [ 84.802714] __switch_to+0xc8/0x120 [ 84.806287] __schedule+0x3d0/0x910 [ 84.809865] schedule+0x78/0x110 [ 84.813175] jbd2_journal_commit_transaction+0x230/0x1e10 [ 84.818711] kjournald2+0xc4/0x270 [ 84.822187] kthread+0x148/0x170 [ 84.825497] ret_from_fork+0x10/0x24 [ 84.829160] task:ext4lazyinit state:D stack: 0 pid: 367 ppid: 2 flags:0x000008 [ 84.837718] Call trace: [ 84.840216] __switch_to+0xc8/0x120 [ 84.843799] __schedule+0x3d0/0x910 [ 84.847376] schedule+0x78/0x110 [ 84.850686] schedule_timeout+0x184/0x340 [ 84.854792] io_schedule_timeout+0x2c/0x50 [ 84.858994] wait_for_completion_io_timeout+0x8c/0x110 [ 84.864263] submit_bio_wait+0x84/0xd0 [ 84.868107] blkdev_issue_zeroout+0x130/0x1e0 [ 84.872573] ext4_init_inode_table+0x290/0x8b0 [ 84.877121] ext4_lazyinit_thread+0x524/0x780 [ 84.881583] kthread+0x148/0x170 [ 84.884895] ret_from_fork+0x10/0x24 [ 84.888580] task:NetworkManager state:D stack: 0 pid: 1223 ppid: 1 flags:0x000000 [ 84.897140] Call trace: [ 84.899647] __switch_to+0xc8/0x120 [ 84.903217] __schedule+0x3d0/0x910 [ 84.906798] schedule+0x78/0x110 [ 84.910109] io_schedule+0x24/0xd0 [ 84.910116] wait_on_page_bit_common+0x170/0x3d0 [ 84.918323] generic_file_buffered_read+0x488/0xa40 [ 84.926170] generic_file_read_iter+0xf0/0x170 [ 84.930723] ext4_file_read_iter+0x5c/0x150 [ 84.935005] new_sync_read+0xfc/0x1a0 [ 84.938750] vfs_read+0x130/0x1c0 [ 84.942146] ksys_read+0x7c/0x110 [ 84.945541] __arm64_sys_read+0x28/0x40 [ 84.949470] el0_svc_common.constprop.0+0x80/0x1d0 [ 84.954377] do_el0_svc+0x38/0xb0 [ 84.957770] el0_svc+0x1c/0x30 [ 84.960897] el0_sync_handler+0xa8/0xb0 [ 84.964832] el0_sync+0x16c/0x180 [ 84.968230] task:systemd-hostnam state:D stack: 0 pid: 1036 ppid: 1 flags:0x000004 [ 84.976787] Call trace: [ 84.979294] __switch_to+0xc8/0x120 [ 84.982868] __schedule+0x3d0/0x910 [ 84.986441] schedule+0x78/0x110 [ 84.989755] synchronize_rcu_expedited+0x2ac/0x510 [ 84.994674] namespace_unlock+0xc4/0x160 [ 84.998694] drop_collected_mounts+0x7c/0x90 [ 85.003077] put_mnt_ns+0x44/0x70 [ 85.006466] free_nsproxy+0x28/0x240 [ 85.010134] switch_task_namespaces+0x84/0xa0 [ 85.014595] exit_task_namespaces+0x28/0x40 [ 85.018881] do_exit+0x340/0xab0 [ 85.022190] do_group_exit+0x4c/0xb0 [ 85.025850] __arm64_sys_exit_group+0x28/0x30 [ 85.030315] el0_svc_common.constprop.0+0x80/0x1d0 [ 85.035221] do_el0_svc+0x38/0xb0 [ 85.038619] el0_svc+0x1c/0x30 [ 85.041746] el0_sync_handler+0xa8/0xb0 [ 85.045682] el0_sync+0x16c/0x180 [ 85.049076] task:nm-dispatcher state:D stack: 0 pid: 1096 ppid: 1 flags:0x000000 [ 85.057632] Call trace: [ 85.060145] __switch_to+0xc8/0x120 [ 85.063719] __schedule+0x3d0/0x910 [ 85.067291] schedule+0x78/0x110 [ 85.070600] io_schedule+0x24/0xd0 [ 85.074082] __lock_page_killable+0x144/0x2d0 [ 85.078541] filemap_fault+0xd8/0xa40 [ 85.082291] ext4_filemap_fault+0x3c/0x9a0 [ 85.086496] __do_fault+0x44/0x1e0 [ 85.089976] handle_mm_fault+0xb00/0x1020 [ 85.094086] do_page_fault+0x118/0x400 [ 85.097927] do_translation_fault+0x7c/0x90 [ 85.102214] do_mem_abort+0x54/0xb0 [ 85.105786] el0_ia+0x60/0xb0 [ 85.108830] el0_sync_handler+0x90/0xb0 [ 85.112762] el0_sync+0x16c/0x180 [ 85.116160] task:nvfancontrol state:D stack: 0 pid: 1210 ppid: 1 flags:0x000000 [ 85.124716] Call trace: [ 85.127218] __switch_to+0xc8/0x120 [ 85.130793] __schedule+0x3d0/0x910 [ 85.134369] schedule+0x78/0x110 [ 85.137674] schedule_timeout+0x184/0x340 [ 85.141779] wait_for_completion_timeout+0x8c/0x110 [ 85.146776] tegra_bpmp_transfer+0x198/0x370 [ 85.151150] 0xffffabaa84bd93ac [ 85.154368] of_thermal_get_temp+0x40/0x60 [ 85.158564] thermal_zone_get_temp+0x78/0x160 [ 85.163035] temp_show+0x40/0x90 [ 85.166344] dev_attr_show+0x40/0x80 [ 85.170005] sysfs_kf_seq_show+0x90/0x130 [ 85.174117] kernfs_seq_show+0x48/0x60 [ 85.177958] seq_read_iter+0x1d4/0x490 [ 85.181801] kernfs_fop_read_iter+0x154/0x1d0 [ 85.186266] new_sync_read+0xfc/0x1a0 [ 85.190014] vfs_read+0x130/0x1c0 [ 85.193409] ksys_read+0x7c/0x110 [ 85.196807] __arm64_sys_read+0x28/0x40 [ 85.200738] el0_svc_common.constprop.0+0x80/0x1d0 [ 85.205650] do_el0_svc+0x38/0xb0 [ 85.209043] el0_svc+0x1c/0x30 [ 85.212174] el0_sync_handler+0xa8/0xb0 [ 85.216101] el0_sync+0x16c/0x180 [ 85.219503] task:debconf-communi state:D stack: 0 pid: 1410 ppid: 1316 flags:0x000000 [ 85.228058] Call trace: [ 85.230565] __switch_to+0xc8/0x120 [ 85.234138] __schedule+0x3d0/0x910 [ 85.237712] schedule+0x78/0x110 [ 85.241018] io_schedule+0x24/0xd0 [ 85.244500] wait_on_page_bit+0x13c/0x270 [ 85.248610] wait_on_page_writeback+0x50/0x100 [ 85.253160] __filemap_fdatawait_range+0xa4/0x140 [ 85.257975] file_write_and_wait_range+0xac/0xe0 [ 85.262702] ext4_sync_file+0x1bc/0x420 [ 85.266632] vfs_fsync_range+0x50/0x90 [ 85.270471] do_fsync+0x4c/0x90 [ 85.273683] __arm64_sys_fsync+0x28/0x40 [ 85.277698] el0_svc_common.constprop.0+0x80/0x1d0 [ 85.282608] do_el0_svc+0x38/0xb0 [ 85.286002] el0_svc+0x1c/0x30 [ 85.289128] el0_sync_handler+0xa8/0xb0 [ 85.293054] el0_sync+0x16c/0x180 [ 85.296443] watchdog: ====For debug only: End Printing Blocked Tasks==== [ 85.305001] Kernel panic - not syncing: softlockup: hung tasks [ 85.310983] CPU: 0 PID: 168 Comm: kworker/u12:3 Tainted: G OEL 5.10.120-teg2 [ 85.319723] Hardware name: Unknown NVIDIA Orin NX Developer Kit/NVIDIA Orin NX Developer3 [ 85.331410] Workqueue: 0x0 (devfreq_wq) [ 85.335422] Call trace: [ 85.337928] dump_backtrace+0x0/0x1d0 [ 85.341676] show_stack+0x30/0x40 [ 85.345072] dump_stack+0xd8/0x138 [ 85.348557] panic+0x17c/0x384 [ 85.351687] watchdog_timer_fn+0x270/0x2b0 [ 85.355881] __hrtimer_run_queues+0x148/0x380 [ 85.360346] hrtimer_interrupt+0xf0/0x250 [ 85.364456] arch_timer_handler_phys+0x40/0x50 [ 85.369010] handle_percpu_devid_irq+0x90/0x280 [ 85.373659] generic_handle_irq+0x40/0x60 [ 85.377763] __handle_domain_irq+0x70/0xd0 [ 85.381958] gic_handle_irq+0x68/0x134 [ 85.385798] el1_irq+0xd0/0x180 [ 85.389007] _raw_spin_unlock_irq+0x30/0x60 [ 85.393291] finish_task_switch+0x88/0x270 [ 85.397483] __schedule+0x3d4/0x910 [ 85.401055] schedule+0x78/0x110 [ 85.404361] worker_thread+0xc0/0x430 [ 85.408109] kthread+0x148/0x170 [ 85.411412] ret_from_fork+0x10/0x24 [ 85.415088] SMP: stopping secondary CPUs [ 85.419115] Kernel Offset: 0x2baacaf30000 from 0xffff800010000000 [ 85.425361] PHYS_OFFSET: 0xffffe3cc00000000 [ 85.429642] CPU features: 0x08040006,4a80aa38 [ 85.434112] Memory Limit: none [ 85.437237] ---[ end Kernel panic - not syncing: softlockup: hung tasks ]--- �� [0000.060] I> MB1 (version: 1.2.0.0-t234-54845784-562369e5) [0000.066] I> t234-A01-0-Silicon (0x12347) Prod [0000.070] I> Boot-mode : Coldboot [0000.073] I> Entry timestamp: 0x00000000 [0000.077] I> last_boot_error: 0x0 [0000.080] I> BR-BCT: preprod_dev_sign: 0 [0000.084] I> rst_source: 0x2, rst_level: 0x1 [0000.088] I> Task: SE error check [0000.091] I> Task: Bootchain select WAR set [0000.095] I> Task: Enable SLCG [0000.098] I> Task: CRC check [0000.101] I> Task: Initialize MB2 params [0000.105] I> MB2-params @ 0x40060000 [0000.108] I> Task: Crypto init [0000.111] I> Task: Perform MB1 KAT tests [0000.115] I> Task: NVRNG health check [0000.119] I> NVRNG: Health check success [0000.122] I> Task: MSS Bandwidth limiter settings for iGPU clients [0000.128] I> Task: Enabling and initialization of Bandwidth limiter [0000.135] I> No request to configure MBWT settings for any PC! [0000.140] I> Task: Secure debug controls [0000.144] I> Task: strap war set [0000.147] I> Task: Initialize SOC Therm [0000.151] I> Task: Program NV master stream id [0000.155] I> Task: Verify boot mode [0000.161] I> Task: Alias fuses [0000.164] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.171] I> Task: Print SKU type [0000.174] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000078 [0000.180] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0000.184] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0000.188] I> FUSE_OPT_DLA_DISABLE = 0x00000002 [0000.192] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0000.197] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0000.201] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0000.206] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0000.210] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0000.214] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.218] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.222] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.226] I> FUSE_SKU_INFO_0 = 0xd4 [0000.230] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.234] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.238] I> SKU: Prod [0000.240] I> Task: Boost clocks [0000.243] I> Initializing PLLC2 for AXI_CBB. [0000.247] I> AXI_CBB : src = 35, divisor = 0 [0000.251] I> Task: Voltage monitor [0000.254] I> VMON: Vmon re-calibration and fine tuning done [0000.260] I> Task: UPHY init [0000.265] I> HSIO UPHY init done [0000.268] W> Skipping GBE UPHY config [0000.271] I> Task: Boot device init [0000.275] I> Boot_device: QSPI_FLASH instance: 0 [0000.279] I> Qspi clock source : pllc_out0 [0000.283] I> QSPI Flash: Macronix 64MB [0000.287] I> QSPI-0l initialized successfully [0000.291] I> Task: TSC init [0000.294] I> Task: Load membct [0000.297] I> RAM_CODE 0x4000021 [0000.300] I> Loading MEMBCT [0000.303] I> Slot: 0 [0000.305] I> Binary[0] block-3840 (partition size: 0x40000) [0000.310] I> Binary name: MEM-BCT-0 [0000.313] I> Size of crypto header is 8192 [0000.317] I> Size of crypto header is 8192 [0000.321] I> strt_pg_num(3840) num_of_pgs(16) read_buf(0x40050000) [0000.327] I> BCH of MEM-BCT-0 read from storage [0000.332] I> BCH address is : 0x40050000 [0000.336] I> MEM-BCT-0 header integrity check is success [0000.341] I> Binary magic in BCH component 0 is MEM0 [0000.346] I> component binary type is 0 [0000.349] I> strt_pg_num(3856) num_of_pgs(115) read_buf(0x40040000) [0000.356] I> MEM-BCT-0 binary is read from storage [0000.361] I> MEM-BCT-0 binary integrity check is success [0000.366] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.373] I> RAM_CODE 0x4000021 [0000.378] I> RAM_CODE 0x4000021 [0000.382] I> Task: Load Page retirement list [0000.386] I> Task: SDRAM params override [0000.390] I> Task: Save mem-bct info [0000.394] I> Task: Carveout allocate [0000.397] I> RCM blob carveout will not be allocated [0000.402] I> Update CCPLEX IST carveout from MB1-BCT [0000.407] I> ECC region[0]: Start:0x0, End:0x0 [0000.411] I> ECC region[1]: Start:0x0, End:0x0 [0000.415] I> ECC region[2]: Start:0x0, End:0x0 [0000.419] I> ECC region[3]: Start:0x0, End:0x0 [0000.424] I> ECC region[4]: Start:0x0, End:0x0 [0000.428] I> Non-ECC region[0]: Start:0x80000000, End:0x280000000 [0000.434] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.439] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.443] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.448] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.458] I> allocated(CO:43) base:0x27c000000 size:0x4000000 align: 0x200000 [0000.466] I> allocated(CO:39) base:0x279e00000 size:0x2200000 align: 0x10000 [0000.472] I> allocated(CO:20) base:0x276000000 size:0x2000000 align: 0x2000000 [0000.480] I> allocated(CO:24) base:0x274000000 size:0x2000000 align: 0x2000000 [0000.487] I> allocated(CO:28) base:0x272000000 size:0x2000000 align: 0x2000000 [0000.494] I> allocated(CO:22) base:0x278000000 size:0x1000000 align: 0x1000000 [0000.501] I> allocated(CO:35) base:0x279000000 size:0xe00000 align: 0x10000 [0000.508] I> allocated(CO:02) base:0x271800000 size:0x800000 align: 0x800000 [0000.515] I> allocated(CO:03) base:0x271000000 size:0x800000 align: 0x800000 [0000.522] I> allocated(CO:06) base:0x270800000 size:0x800000 align: 0x800000 [0000.529] I> allocated(CO:56) base:0x270000000 size:0x800000 align: 0x200000 [0000.536] I> allocated(CO:07) base:0x26fc00000 size:0x400000 align: 0x400000 [0000.543] I> allocated(CO:33) base:0x26f800000 size:0x400000 align: 0x200000 [0000.549] I> allocated(CO:23) base:0x26f600000 size:0x200000 align: 0x200000 [0000.556] I> allocated(CO:01) base:0x26f500000 size:0x100000 align: 0x100000 [0000.563] I> allocated(CO:04) base:0x26f400000 size:0x100000 align: 0x100000 [0000.570] I> allocated(CO:05) base:0x26f300000 size:0x100000 align: 0x100000 [0000.577] I> allocated(CO:08) base:0x26f200000 size:0x100000 align: 0x100000 [0000.584] I> allocated(CO:09) base:0x26f100000 size:0x100000 align: 0x100000 [0000.591] I> allocated(CO:15) base:0x26f000000 size:0x100000 align: 0x100000 [0000.598] I> allocated(CO:17) base:0x26ef00000 size:0x100000 align: 0x100000 [0000.605] I> allocated(CO:27) base:0x26ee00000 size:0x100000 align: 0x100000 [0000.612] I> allocated(CO:42) base:0x26ed00000 size:0x100000 align: 0x100000 [0000.619] I> allocated(CO:54) base:0x26ec80000 size:0x80000 align: 0x80000 [0000.626] I> allocated(CO:34) base:0x26ec70000 size:0x10000 align: 0x10000 [0000.632] I> allocated(CO:72) base:0x26ea70000 size:0x200000 align: 0x10000 [0000.639] I> allocated(CO:47) base:0x26e600000 size:0x400000 align: 0x200000 [0000.646] I> allocated(CO:48) base:0x26ea50000 size:0x20000 align: 0x10000 [0000.653] I> allocated(CO:69) base:0x26ea30000 size:0x20000 align: 0x10000 [0000.660] I> allocated(CO:49) base:0x26ea20000 size:0x10000 align: 0x10000 [0000.666] I> allocated(CO:50) base:0x26ea10000 size:0x10000 align: 0x10000 [0000.673] I> NSDRAM base: 0x80000000, end: 0x26ea70000, size: 0x1eea70000 [0000.680] I> Task: Thermal check [0000.683] I> max_chip_limit = 105 [0000.686] I> min_chip_limit = -28 [0000.689] I> max temp read = 44 [0000.692] I> min temp read = 42 [0000.695] I> Task: Update FSI SCR with thermal fuse data [0000.700] I> Task: Enable WDT 5th expiry [0000.704] I> Task: I2C register [0000.707] I> Task: Set I2C bus freq [0000.710] I> Task: Reset FSI [0000.713] I> Task: Pinmux init [0000.716] I> skipped mmio_addr = 0x9240008 [0000.720] I> skipped mmio_addr = 0x9240000 [0000.724] I> skipped mmio_addr = 0x9240010 [0000.728] I> skipped mmio_addr = 0x9240018 [0000.732] I> skipped mmio_addr = 0x9240020 [0000.736] I> skipped mmio_addr = 0x9240030 [0000.740] I> skipped mmio_addr = 0x9240028 [0000.744] I> skipped mmio_addr = 0x9240038 [0000.748] I> skipped mmio_addr = 0x9240040 [0000.752] I> skipped mmio_addr = 0x9240048 [0000.756] I> skipped mmio_addr = 0x9241000 [0000.760] I> skipped mmio_addr = 0x9241008 [0000.764] I> skipped mmio_addr = 0x9241010 [0000.768] I> skipped mmio_addr = 0x9241018 [0000.772] I> skipped mmio_addr = 0x9241020 [0000.775] I> skipped mmio_addr = 0x9241028 [0000.779] I> skipped mmio_addr = 0x9241030 [0000.783] I> skipped mmio_addr = 0x9241038 [0000.787] I> skipped mmio_addr = 0x9241040 [0000.791] I> skipped mmio_addr = 0x9242000 [0000.795] I> skipped mmio_addr = 0x9242008 [0000.799] I> Task: Prod config init [0000.802] I> Task: Pad voltage init [0000.806] I> Task: Prod init [0000.809] I> Task: Program rst req config reg [0000.813] I> Task: Common rail init [0000.816] I> DONE: Thermal config [0000.820] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.829] I> DONE: SOC rail config [0000.832] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.839] I> DONE: MEMIO rail config [0000.843] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT. [0000.849] I> DONE: GPU rail info [0000.853] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT. [0000.859] I> DONE: CV rail info [0000.862] I> Task: Mem clock src [0000.865] I> Task: Misc. board config [0000.869] I> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.875] I> Task: SDRAM init [0000.878] I> MemoryType: 4 MemBctRevision: 1 [0000.885] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0000.892] I> MSS CAR: Init PLLM [0000.895] I> MSS CAR: Init PLLHUB [0000.900] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.911] I> SDRAM initialized! [0000.914] I> SDRAM Size in Total 0x200000000 [0000.918] I> Task: Dram Ecc scrub [0000.921] I> Task: DRAM alias check [0000.931] I> Task: Program NSDRAM carveout [0000.935] I> NSDRAM carveout encryption is enabled [0000.940] I> Program NSDRAM carveout [0000.945] I> Task: Register checker [0000.950] I> Task: Enable clock-mon [0000.954] I> FMON: Fmon re-programming done [0000.959] I> Task: Mapper init [0000.962] I> Task: SC7 Context Init [0000.966] I> Task: CCPLEX IST init [0000.970] I> Task: CPU WP0 [0000.973] I> Loading MCE [0000.976] I> Slot: 0 [0000.978] I> Binary[8] block-22784 (partition size: 0x80000) [0000.985] I> Binary name: MCE [0000.988] I> Size of crypto header is 8192 [0000.992] I> Size of crypto header is 8192 [0000.997] I> strt_pg_num(22784) num_of_pgs(16) read_buf(0x4003e000) [0001.005] I> BCH of MCE read from storage [0001.009] I> BCH address is : 0x4003e000 [0001.014] I> MCE header integrity check is success [0001.019] I> Binary magic in BCH component 0 is MTSM [0001.025] I> component binary type is 8 [0001.029] I> Size of crypto header is 8192 [0001.033] I> strt_pg_num(22800) num_of_pgs(357) read_buf(0x40000000) [0001.043] I> MCE binary is read from storage [0001.048] I> MCE binary integrity check is success [0001.053] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0001.061] I> Size of crypto header is 8192 [0001.076] I> Size of crypto header is 8192 [0001.081] I> Sending WP0 mailbox command to PSC [0001.090] I> Task: XUSB Powergate [0001.094] I> Skipping powergate XUSB. [0001.098] I> Task: MB1 fixed firewalls [0001.113] W> Firewall readback mismatch [0001.123] I> Task: Load bpmp-fw [0001.127] I> Slot: 0 [0001.129] I> Binary[15] block-9984 (partition size: 0x180000) [0001.136] I> Binary name: BPMP_FW [0001.140] I> Size of crypto header is 8192 [0001.144] I> Size of crypto header is 8192 [0001.149] I> strt_pg_num(9984) num_of_pgs(16) read_buf(0x807fe000) [0001.156] I> BCH of BPMP_FW read from storage [0001.161] I> BCH address is : 0x807fe000 [0001.166] I> BPMP_FW header integrity check is success [0001.172] I> Binary magic in BCH component 0 is BPMF [0001.177] I> component binary type is 15 [0001.181] I> Size of crypto header is 8192 [0001.186] I> strt_pg_num(10000) num_of_pgs(2037) read_buf(0x80000000) [0001.204] I> BPMP_FW binary is read from storage [0001.212] I> BPMP_FW binary integrity check is success [0001.217] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfea00) [0001.225] I> Slot: 0 [0001.227] I> Binary[16] block-13056 (partition size: 0x400000) [0001.234] I> Binary name: BPMP_FW_DTB [0001.238] I> Size of crypto header is 8192 [0001.243] I> Size of crypto header is 8192 [0001.247] I> strt_pg_num(13056) num_of_pgs(16) read_buf(0x807fc000) [0001.255] I> BCH of BPMP_FW_DTB read from storage [0001.260] I> BCH address is : 0x807fc000 [0001.265] I> BPMP_FW_DTB header integrity check is success [0001.271] I> Binary magic in BCH component 0 is BPMD [0001.276] I> component binary type is 16 [0001.281] I> Size of crypto header is 8192 [0001.285] I> strt_pg_num(13072) num_of_pgs(256) read_buf(0x807dbff0) [0001.294] I> BPMP_FW_DTB binary is read from storage [0001.300] I> BPMP_FW_DTB binary integrity check is success [0001.306] I> Binary BPMP_FW_DTB loaded successfully at 0x807dbff0 (0x1fe80) [0001.315] I> Task: Load psc-fw [0001.319] I> Slot: 0 [0001.321] I> Binary[17] block-21248 (partition size: 0xc0000) [0001.328] I> Binary name: PSC_FW [0001.331] I> Size of crypto header is 8192 [0001.336] I> Size of crypto header is 8192 [0001.340] I> strt_pg_num(21248) num_of_pgs(16) read_buf(0x80ffe000) [0001.348] I> BCH of PSC_FW read from storage [0001.353] I> BCH address is : 0x80ffe000 [0001.358] I> PSC_FW header integrity check is success [0001.363] I> Binary magic in BCH component 0 is PFWP [0001.369] I> component binary type is 17 [0001.373] I> Size of crypto header is 8192 [0001.377] I> strt_pg_num(21264) num_of_pgs(717) read_buf(0x80fa4600) [0001.389] I> PSC_FW binary is read from storage [0001.395] I> PSC_FW binary integrity check is success [0001.400] I> Binary PSC_FW loaded successfully at 0x80fa4600 (0x59980) [0001.409] I> Task: Load nvdec-fw [0001.412] I> Slot: 0 [0001.415] I> Binary[7] block-6400 (partition size: 0x100000) [0001.421] I> Binary name: NVDEC [0001.425] I> Size of crypto header is 8192 [0001.429] I> Size of crypto header is 8192 [0001.434] I> strt_pg_num(6400) num_of_pgs(16) read_buf(0x800fe000) [0001.441] I> BCH of NVDEC read from storage [0001.446] I> BCH address is : 0x800fe000 [0001.451] I> NVDEC header integrity check is success [0001.456] I> Binary magic in BCH component 0 is NDEC [0001.462] I> component binary type is 7 [0001.466] I> Size of crypto header is 8192 [0001.470] I> strt_pg_num(6416) num_of_pgs(560) read_buf(0x80000000) [0001.481] I> NVDEC binary is read from storage [0001.487] I> NVDEC binary integrity check is success [0001.492] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0001.500] I> Size of crypto header is 8192 [0001.521] I> Task: Load tsec-fw [0001.524] I> TSEC-FW load support not enabled [0001.529] I> Task: GPIO interrupt map [0001.533] I> Task: SC7 context save [0001.537] I> Slot: 0 [0001.539] I> Binary[27] block-0 (partition size: 0x100000) [0001.545] I> Binary name: BR_BCT [0001.549] I> Size of crypto header is 8192 [0001.553] I> Size of crypto header is 8192 [0001.558] I> strt_pg_num(0) num_of_pgs(16) read_buf(0xa0000000) [0001.565] I> BR_BCT binary is read from storage [0001.570] I> BR_BCT binary integrity check is success [0001.576] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.583] I> Slot: 0 [0001.586] I> Binary[13] block-23808 (partition size: 0x30000) [0001.592] I> Binary name: SC7-FW [0001.596] I> Size of crypto header is 8192 [0001.600] I> Size of crypto header is 8192 [0001.605] I> Size of crypto header is 8192 [0001.609] I> strt_pg_num(23808) num_of_pgs(16) read_buf(0xa0002000) [0001.617] I> BCH of SC7-FW read from storage [0001.622] I> BCH address is : 0xa0002000 [0001.627] I> SC7-FW header integrity check is success [0001.632] I> Binary magic in BCH component 0 is WB0B [0001.638] I> component binary type is 13 [0001.642] I> Size of crypto header is 8192 [0001.646] I> strt_pg_num(23824) num_of_pgs(345) read_buf(0xa0004000) [0001.656] I> SC7-FW binary is read from storage [0001.662] I> SC7-FW binary integrity check is success [0001.667] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x2b0e0) [0001.675] I> Slot: 0 [0001.677] I> Binary[22] block-24192 (partition size: 0x30000) [0001.684] I> Binary name: PSC_RF [0001.687] I> Size of crypto header is 8192 [0001.692] I> Size of crypto header is 8192 [0001.696] I> Size of crypto header is 8192 [0001.701] I> strt_pg_num(24192) num_of_pgs(16) read_buf(0xa002f0e0) [0001.709] I> BCH of PSC_RF read from storage [0001.713] I> BCH address is : 0xa002f0e0 [0001.719] I> PSC_RF header integrity check is success [0001.724] I> Binary magic in BCH component 0 is PSCR [0001.729] I> component binary type is 22 [0001.734] I> Size of crypto header is 8192 [0001.738] I> strt_pg_num(24208) num_of_pgs(223) read_buf(0xa00310e0) [0001.747] I> PSC_RF binary is read from storage [0001.753] I> PSC_RF binary integrity check is success [0001.758] I> Binary PSC_RF loaded successfully at 0xa00310e0 (0x1bdd0) [0001.781] I> Task: Save WP0 payload to SC7 ctx [0001.786] I> Task: Load MB2rf binary to SC7 ctx [0001.791] I> Slot: 0 [0001.793] I> Binary[14] block-24576 (partition size: 0x20000) [0001.800] I> Binary name: MB2_RF [0001.803] I> Size of crypto header is 8192 [0001.808] I> Size of crypto header is 8192 [0001.812] I> Size of crypto header is 8192 [0001.817] I> strt_pg_num(24576) num_of_pgs(16) read_buf(0xa00d6a88) [0001.825] I> BCH of MB2_RF read from storage [0001.829] I> BCH address is : 0xa00d6a88 [0001.835] I> MB2_RF header integrity check is success [0001.840] I> Binary magic in BCH component 0 is MB2R [0001.846] I> component binary type is 14 [0001.850] I> Size of crypto header is 8192 [0001.854] I> strt_pg_num(24592) num_of_pgs(224) read_buf(0xa00d8a88) [0001.863] I> MB2_RF binary is read from storage [0001.869] I> MB2_RF binary integrity check is success [0001.874] I> Binary MB2_RF loaded successfully at 0xa00d8a88 (0x1bf80) [0001.882] I> Task: Save fuse alias data to SC7 ctx [0001.887] I> Task: Save PMIC data to SC7 ctx [0001.892] I> Task: Save Pinmux data to SC7 ctx [0001.897] I> Task: Save Pad Voltage data to SC7 ctx [0001.902] I> Task: Save controller prod data to SC7 ctx [0001.907] I> Task: Save prod cfg data to SC7 ctx [0001.912] I> Task: Save I2C bus freq data to SC7 ctx [0001.918] I> Task: Save SOCTherm data to SC7 ctx [0001.923] I> Task: Save FMON data to SC7 ctx [0001.927] I> Task: Save VMON data to SC7 ctx [0001.932] I> Task: Save TZDRAM data to SC7 ctx [0001.936] I> Task: Save GPIO int data to SC7 ctx [0001.941] I> Task: Save clock data to SC7 ctx [0001.946] I> Task: Save debug data to SC7 ctx [0001.951] I> Task: Save MBWT data to SC7 ctx [0001.959] I> SC7 context save done [0001.963] I> Task: Load MB2/Applet/FSKP [0001.968] I> Loading MB2 [0001.971] I> Slot: 0 [0001.973] I> Binary[6] block-8448 (partition size: 0x80000) [0001.979] I> Binary name: MB2 [0001.983] I> Size of crypto header is 8192 [0001.987] I> Size of crypto header is 8192 [0001.992] I> strt_pg_num(8448) num_of_pgs(16) read_buf(0x8007e000) [0001.999] I> BCH of MB2 read from storage [0002.004] I> BCH address is : 0x8007e000 [0002.009] I> MB2 header integrity check is success [0002.014] I> Binary magic in BCH component 0 is MB2B [0002.019] I> component binary type is 6 [0002.023] I> Size of crypto header is 8192 [0002.028] I> strt_pg_num(8464) num_of_pgs(841) read_buf(0x80000000) [0002.040] I> MB2 binary is read from storage [0002.046] I> MB2 binary integrity check is success [0002.051] I> Binary MB2 loaded successfully at 0x80000000 (0x691f0) [0002.059] I> Task: Map CCPLEX SHARED carveout [0002.064] I> Task: Prepare MB2 params [0002.069] I> BR-BCT Boot Chain Fields [0002.073] I> u32_non_gpio_select_boot_chain : 0 [0002.078] I> u32_num_boot_chains : 2 [0002.083] I> bf_bl_gpio_select_boot_chain_1b : 0 [0002.089] I> Task: Dram ecc test [0002.092] I> Task: Misc NV security settings [0002.097] I> NVDEC sticky bits programming done [0002.102] I> Successfully powergated NVDEC [0002.106] I> Task: Disable/Reload WDT [0002.110] I> Task: Program misc carveouts [0002.114] I> Program IPC carveouts [0002.122] I> SLCG Global override status := 0x0 [0002.127] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-4d0906e6) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x0020f48f I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x270000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50002034) I> Task: Enable hot-plug capability (0x50028064) I> Task: PSC mailbox init (0x500178b0) I> Task: Crypto init (0x5000675c) I> Task: Enable GP-SE clock (0x50002198) I> Task: DICE Identity init (0x5001af00) I> DICE is not enabled. I> Task: Measured Boot init (0x5001b674) I> Task: OEM SC7 context save init (0x5001a600) I> Task: I2C register (0x50001ff8) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001fe0) I> Task: Program CBB PCIE AMAP regions (0x5001ac14) I> Task: Boot device init (0x50001f28) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001f24) I> Found 57 partitions in QSPI_FLASH (instance 0) I> Task: Load and authenticate registered FWs (0x5001e198) I> Task: Load AUXP FWs (0x50027c04) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x26f200000 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x26ef00000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x276000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9457792 bytes I> dce: plain binary integrity check is success I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x276000000 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x26fc00000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x26f300000 I> Task: Carveout setup (0x500208f8) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x50017784) I> Task: Enable FSI VMON (0x50017280) I> Task: Validate FSI Therm readings (0x50017364) I> Task: Restore XUSB sec (0x50001ef8) I> Task: Enable FSI SE clock (0x50017d0c) I> Task: Initialize SBSA UART CAR (0x500020fc) I> Task: Initialize CPUBL Params (0x50018cf8) I> CPUBL-params @ 0x272000000 I> Task: Ratchet update (0x50029100) W> Skip ratchet update - OPTIN fuse not set I> Task: Prepare eeprom data (0x50018ac4) I> Task: Revoke PKC fuse (0x50001d44) I> PKC revoke fuse burn not requested I> Task: FSI padctl context save (0x5001a790) W> Skipping FSI padctl config save: fsi not enabled I> Task: Unpowergate APE (0x50018474) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: OEM firewalls (0x50024d68) I> OEM firewalls configured I> Task: Powergate APE (0x500185e8) I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings (0x500251bc) I> Task: Unhalt AUXPs (0x50027e6c) I> Unhalting SPE.. I> Enabling combined UART ����spe: early_init ����vic initialized �Ḹ��tsc initialized ����aon lic initialized �ุ��spe: tag is 5243985d1b1eb3f06fac6d36bd7e74ac ����spe: SafeRTOS v8.4 �ุ��spe: init ����scheduler initialized �ุ��aon hsp initialized ����tag initialized �ุ��tcu initialized ����bpmp ipc initialized �ุ��spe: late init ����cpu_nic clock initialized �ุ��apb clock initialized ����pm initialized �ุ��bpmp hsp initialized ����top1 hsp initialized �ุ��ccplex ipc initialized ����spe: start scheduler �ุ�� I> Task: Trigger mailbox for PSC-BL1 exit (0x50017930) I> Sending opcode 0x4d420802 to psc ��INFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x278002000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: 8a33b23-73b589c-8a15f76-rel-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 ��I> Received ACK from psc I> Tas��INFO: MONITOR: user task addr:0x278022000, blob offset:0x00020000 INFO: MONITOR: populated user images:13 INFO: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_init... INFO: enter idle task. �� bpmp: socket 0 bpmp: base binary md5 is 925eece486b7c46d91aa449178b5d322 bpmp: combined binary md5 is 029a50a8fb4897d35f94a799f82169a9 bpmp: firmware tag is 029a50a8fb4897d35f94-925eece486b initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ��k: Sta��initialized avfs_clk_platform initialized powergate ��rt secure NOR provision ��initialized dvs ��(0x��initialized clk_mach_config initialized pm suspend progress: 0x0 initialized suspend initialized strap initialized mce_dbell ��5001aa2c) I> Task: Load FSI keyblob (0x50017d54) I> Task: Unhalt AUXPs (0x50027e74) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x50018e1c) I> Task: Load TOS (0x50019580) I> Task: Load and ��initialized emc initialized emc_mrq ��[ 2.546615] Camera-FW on t234-rce-safe started ��initialized clk_cal initialized uphy_dt initialized uphy_mrq HSIO UPHY reset��TCU early console enabled. �� has been de-asserted 0x0 initialized uphy initialized pg_late initialized pg_mrq_init swdtimer_init: reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post �� ��authenticate registered FWs (0x5001e198) I> Partit��initialized clk_cal_late initialized noc_late initialized cvc ��ion name: A_cpu-bootloader I> Siz��initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/2 have not matching zones 0/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zones 0/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/0 have not matching zones 1/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zones 1/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zones 2/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zones 2/1 initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable pwm3 enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp initialized clk_mach_post ��[ 2.707773] Camera-FW on t234-rce-safe ready SHA1=8676d22a (crt 15.089 ms,��initializt initialized regulator_post initialized profile initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete �� total boot 177.310 ms) ��e of partition: 3670016 I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloa��DCE: FW e ��der I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os I> MB2-params @ 0x40060000 I> cpubl_params: nsdram: carveout: 1, encryption: 1 I> NSDRAM carveout base: 0x80000000, size: 0x1eea70000 I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0x26e600000 I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x27fdee000 I> Relocating OP-TEE dtb from: 0x27fefec50 to 0x27c000020, size: 0x2106 I> [0] START: 0x80000000, SIZE: 0x1eea70000 I> [1] START: 0x272000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x270000200 I> EKB detected (length: 0x410) @ VA:0x270000200 I> Task: Prepare TOS params (0x500194f8) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x27c000020 I> Task: OEM SC7 context save (0x5001a88c) I> OEM sc7 context saved I> Task: Disable MSS perf stats (0x50027f00) I> Task: Program display sticky bits (0x50027e7c) I> Task: Storage device deinit (0x500020a0) I> Task: SMMU external bypass disable (0x50017894) I> Task: SMMU init (0x500177b0) I> Task: Program GICv3 registers (0x50027fa0) I> Task: Audit firewall settings (0x50024fbc) I> Task: Bootchain failure check (0x500025e8) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished ��NOTICE: BL31: v2.6(release):346877e39 NOTICE: BL31: Built : 12:32:40, Aug 1 2023 I/TC: Physical secure memory base 0x27c040000 size 0x3fc0000 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.21 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Aug 1 19:39:55 U4 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guil I/TC: Primary CPU initializing I/TC: Test OEM keys are being used. This is insecure for shipping products! I/TC: Primary CPU switching to normal world boot �� Jetson UEFI firmware (version 202210.3-67203e4 built on 2023-11-13T15:38:41+00:00)