=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.10.02 12:00:52 =~=~=~=~=~=~=~=~=~=~=~=
��
[0182.868] I> MB1 (version: 0.32.0.0-t234-54845784-57325615)
[0182.873] I> t234-A01-0-Silicon (0x12347) Prod
[0182.878] I> Boot-mode : BPMP Diagnostic
[0182.881] I> Emulation: 
[0182.884] I> Entry timestamp: 0x00000000
[0182.888] I> last_boot_error: 0x0
[0182.891] I> BR-BCT: preprod_dev_sign: 0
[0182.894] I> rst_source: 0x0, rst_level: 0x0
[0182.899] I> Task: Initialize MB2 params (0x5000cb51)
[0182.904] I> MB2-params @ 0x40060000
[0182.907] I> Task: Crypto init (0x5001d981)
[0182.911] I> Task: Secure debug controls (0x5000c0a9)
[0182.916] I> Task: strap war set (0x5000ba2d)
[0182.921] I> Task: Program NV master stream id (0x5000c05d)
[0182.926] I> Task: Verify boot mode (0xd4820f1)
[0182.932] I> Task: Alias fuses (0x5001095d)
[0182.937] W> FUSE_ALIAS: Fuse alias on production fused part is not supported.
[0182.944] I> Task: Print SKU type (0x5000f5f1)
[0182.948] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c8
[0182.953] I> FUSE_OPT_GPC_DISABLE = 0x00000001
[0182.957] I> FUSE_OPT_TPC_DISABLE = 0x0000000f
[0182.962] I> FUSE_OPT_DLA_DISABLE = 0x00000002
[0182.966] I> FUSE_OPT_PVA_DISABLE = 0x00000000
[0182.970] I> FUSE_OPT_NVENC_DISABLE = 0x00000000
[0182.975] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000
[0182.979] I> FUSE_OPT_FSI_DISABLE = 0x00000001
[0182.983] I> FUSE_OPT_EMC_DISABLE = 0x0000000c
[0182.988] I> FUSE_BOOTROM_PATCH_VERSION = 0x7
[0182.992] I> FUSE_PSCROM_PATCH_VERSION = 0x7
[0182.996] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2
[0183.000] I> FUSE_SKU_INFO_0 = 0xd4
[0183.003] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS 
[0183.008] I> FUSE_PACKAGE_INFO_0 = 0x2
[0183.011] I> SKU: Prod
[0183.013] I> Task: Boost clocks (0x500148a1)
[0183.017] I> Initializing PLLC2 for AXI_CBB.
[0183.022] I> AXI_CBB : src = 35, divisor = 0
[0183.026] I> Task: Voltage monitor (0x50014b49)
[0183.030] I> VMON: Vmon re-calibration and fine tuning done
[0183.036] I> Task: UPHY init (0x5000d065)
[0183.040] W> UPHY: UPHY lane info table is empty in MB1 BCT.
[0183.046] I> Task: Boot device init (0x50000be9)
[0183.050] I> Boot_device: RCM
[0183.053] I> USB configuration success
[0183.057] I> Task: TSC init (0x50020a4d)
[0183.061] I> Task: Enable WDT 5th expiry (0x50021a41)
[0183.066] I> Task: I2C register (0x50000b85)
[0183.070] I> Task: Reset FSI (0x500148b1)
[0183.074] I> Task: Enable clock-mon (0x50020a35)
[0183.079] I> FMON: Fmon re-programming done
[0183.083] I> Task: MB1 fixed firewalls (0x5002006d)
[0183.089] W> Firewall readback mismatch
[0183.093] W> Firewall readback mismatch
[0183.098] W> Firewall readback mismatch
[0183.103] I> Task: Load MB2/Applet/FSKP (0x5000ca55)
[0183.108] I> Loading MB2 Applet
[0183.111] I> Slot: 0
[0183.113] I> Binary[21] block-0 (partition size: 0x50000)
[0183.118] I>  get_binary_info: Binary name: MB2-Applet
[0183.123] I> Size of crypto header is 8192
[0183.127] I> BCH load address is : 0x4004e000
[0183.131] I> Size of crypto header is 8192
[0183.136] I> BCH of MB2-Applet read from storage
[0183.140] I> BCH address is : 0x4004e000
[0183.144] I> MB2-Applet header integrity check is success
[0183.149] I> Binary magic in BCH component 0 is MB2A
[0183.154] I> component binary type is 21
[0183.158] I> Size of crypto header is 8192
[0183.177] I> MB2-Applet binary is read from storage
[0183.182] I> MB2-Applet binary integrity check is success
[0183.187] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b40)
[0183.194] I> Task: Map CCPLEX SHARED carveout (0x5000cbf9)
[0183.200] I> Task: Prepare MB2 params (0x5000cca9)
[0183.205] I> BR-BCT Boot Chain Fields
[0183.208] I> 	 u32_non_gpio_select_boot_chain  : 0
[0183.213] I> 	 u32_num_boot_chains             : 0
[0183.217] I> 	 bf_bl_gpio_select_boot_chain_1b : 0
[0183.222] I> Task: Misc NV security settings (0x5000c529)
[0183.227] I> NVDEC sticky bits programming done
[0183.232] I> Successfully powergated NVDEC
[0183.236] I> Task: Disable/Reload WDT (0x50021a99)
[0183.240] I> Task: Program misc carveouts (0x50015381)
[0183.245] I> SLCG Global override status := 0x0
[0183.250] I> MB1: MSS reconfig completed
[0183.254] W> Firewall readback mismatch
[0183.257] W> Firewall readback mismatch
[0183.261] W> Firewall readback mismatch
[0183.265] W> Firewall readback mismatch
[0183.268] W> Firewall readback mismatch
[0183.272] W> Firewall readback mismatch
[0183.276] W> Firewall readback mismatch
[0183.279] W> Firewall readback mismatch
[0183.283] W> Firewall readback mismatch
[0183.287] W> Firewall readback mismatch
I> Applet (version: 0.0.0.0-t234-54845784-f44287d2)
I> t234-A01-0-Silicon (0x12347)
I> Emulation: 
I> Entry timestamp: 0xffffffff
I> Task: Pinmux init (0x4000062d)
I> Task: Boot device init (0x400012e5)
I> Applet do storage init
I> Boot_device: QSPI_FLASH instance: 0
I> Qspi clock source : clk_m
I> QSPI-0l initialized successfully
E> Error in command_complete 18000 int_status
E> OCR failed, error = 39390706
E> Failed to open sdmmc-3, err = 39390706
W> Ignoring init failure for device 0-3
E> Error in command_complete 18000 int_status
E> OCR failed, error = 39390706
E> Failed to open sdmmc-3, err = 39390706
W> Ignoring init failure for device 1-3
E> Unknown device 7
E> Unknown device 8
I> Task: Partition Manager Init (0x40002d25)
W> Cannot find any partition table for 00030000
 > PARTITION_MANAGER: Failed to publish partition.
I> Task: I2C register (0x400006a5)
I> Task: Register exit handlers (0x400005f5)
I> Task: Enter 3p server (0x400018e9)
I> USB configuration success
I> Populate chip info
I> RAM_CODE 0x4000021
I> Populate eeprom info
I> Populate eeprom info for module cvm
I> dump bct
I> Rebooting : reboot-recovery


��
[0041.535] I> MB1 (version: 0.32.0.0-t234-54845784-57325615)
[0041.541] I> t234-A01-0-Silicon (0x12347) Prod
[0041.545] I> Boot-mode : Coldboot
[0041.548] I> Emulation: 
[0041.550] I> Entry timestamp: 0x00000000
[0041.554] I> last_boot_error: 0x0
[0041.557] I> BR-BCT: preprod_dev_sign: 0
[0041.561] I> rst_source: 0xb, rst_level: 0x1
[0041.565] I> Task: Bootchain select WAR set (0x5000ba65)
[0041.570] I> Task: Enable SLCG (0x5000bab1)
[0041.574] I> Task: CRC check (0x5001ea19)
[0041.578] I> Task: Initialize MB2 params (0x5000cb51)
[0041.584] I> MB2-params @ 0x40060000
[0041.587] I> Task: Crypto init (0x5001d981)
[0041.591] I> Task: Secure debug controls (0x5000c0a9)
[0041.596] I> Task: strap war set (0x5000ba2d)
[0041.600] I> Task: Initialize SOC Therm (0x5001bd35)
[0041.605] I> Task: Program NV master stream id (0x5000c05d)
[0041.611] I> Task: Verify boot mode (0xd4820f1)
[0041.617] I> Task: Alias fuses (0x5001095d)
[0041.621] W> FUSE_ALIAS: Fuse alias on production fused part is not supported.
[0041.628] I> Task: Print SKU type (0x5000f5f1)
[0041.632] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c8
[0041.638] I> FUSE_OPT_GPC_DISABLE = 0x00000001
[0041.642] I> FUSE_OPT_TPC_DISABLE = 0x0000000f
[0041.646] I> FUSE_OPT_DLA_DISABLE = 0x00000002
[0041.650] I> FUSE_OPT_PVA_DISABLE = 0x00000000
[0041.655] I> FUSE_OPT_NVENC_DISABLE = 0x00000000
[0041.659] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000
[0041.663] I> FUSE_OPT_FSI_DISABLE = 0x00000001
[0041.668] I> FUSE_OPT_EMC_DISABLE = 0x0000000c
[0041.672] I> FUSE_BOOTROM_PATCH_VERSION = 0x7
[0041.676] I> FUSE_PSCROM_PATCH_VERSION = 0x7
[0041.680] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2
[0041.684] I> FUSE_SKU_INFO_0 = 0xd4
[0041.688] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS 
[0041.692] I> FUSE_PACKAGE_INFO_0 = 0x2
[0041.695] I> SKU: Prod
[0041.698] I> Task: Boost clocks (0x500148a1)
[0041.702] I> Initializing PLLC2 for AXI_CBB.
[0041.706] I> AXI_CBB : src = 35, divisor = 0
[0041.710] I> Task: Voltage monitor (0x50014b49)
[0041.715] I> VMON: Vmon re-calibration and fine tuning done
[0041.720] I> Task: UPHY init (0x5000d065)
[0041.726] I> HSIO UPHY init done
[0041.729] E> Skipping GBE UPHY config
[0041.732] I> Task: Boot device init (0x50000be9)
[0041.737] I> Boot_device: RCM
[0041.740] I> USB configuration success
[0042.157] I> Task: TSC init (0x50020a4d)
[0042.161] I> Task: Load membct (0x50011fe9)
[0042.165] I> RAM_CODE 0x4000021
[0042.168] I> Loading MEMBCT 
[0042.171] I> Slot: 0
[0042.173] I> Binary[0] block-0 (partition size: 0x40000)
[0042.178] I>  get_binary_info: Binary name: MEM-BCT-0
[0042.183] I> Size of crypto header is 8192
[0042.187] I> BCH load address is : 0x40050000
[0042.191] I> Size of crypto header is 8192
[0042.201] I> BCH of MEM-BCT-0 read from storage
[0042.206] I> BCH address is : 0x40050000
[0042.210] I> MEM-BCT-0 header integrity check is success
[0042.215] I> Binary magic in BCH component 0 is MEM0
[0042.220] I> component binary type is 0
[0042.227] I> MEM-BCT-0 binary is read from storage
[0042.232] I> MEM-BCT-0 binary integrity check is success
[0042.237] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580)
[0042.244] I> RAM_CODE 0x4000021
[0042.249] I> RAM_CODE 0x4000021
[0042.253] I> Task: Load Page retirement list (0x500115b1)
[0042.258] I> Task: SDRAM params override (0x50011fc5)
[0042.263] I> Task: Save mem-bct info (0x50014fa1)
[0042.268] I> Task: Carveout allocate (0x50015005)
[0042.272] I> ECC region[0]: Start:0x0, End:0x0
[0042.276] I> ECC region[1]: Start:0x0, End:0x0
[0042.281] I> ECC region[2]: Start:0x0, End:0x0
[0042.285] I> ECC region[3]: Start:0x0, End:0x0
[0042.289] I> ECC region[4]: Start:0x0, End:0x0
[0042.294] I> Non-ECC region[0]: Start:0x80000000, End:0x280000000
[0042.300] I> Non-ECC region[1]: Start:0x0, End:0x0
[0042.304] I> Non-ECC region[2]: Start:0x0, End:0x0
[0042.309] I> Non-ECC region[3]: Start:0x0, End:0x0
[0042.313] I> Non-ECC region[4]: Start:0x0, End:0x0
[0042.323] I> allocated(CO:31) base:0x278000000 size:0x8000000 align: 0x8000000
[0042.330] I> allocated(CO:43) base:0x274000000 size:0x4000000 align: 0x200000
[0042.337] I> allocated(CO:20) base:0x272000000 size:0x2000000 align: 0x2000000
[0042.344] I> allocated(CO:24) base:0x270000000 size:0x2000000 align: 0x2000000
[0042.351] I> allocated(CO:28) base:0x26e000000 size:0x2000000 align: 0x2000000
[0042.359] I> allocated(CO:22) base:0x26d000000 size:0x1000000 align: 0x1000000
[0042.366] I> allocated(CO:35) base:0x26c200000 size:0xe00000 align: 0x10000
[0042.372] I> allocated(CO:02) base:0x26b800000 size:0x800000 align: 0x800000
[0042.379] I> allocated(CO:03) base:0x26b000000 size:0x800000 align: 0x800000
[0042.386] I> allocated(CO:06) base:0x26a800000 size:0x800000 align: 0x800000
[0042.393] I> allocated(CO:10) base:0x26a000000 size:0x800000 align: 0x800000
[0042.400] I> allocated(CO:56) base:0x269800000 size:0x800000 align: 0x200000
[0042.407] I> allocated(CO:07) base:0x269400000 size:0x400000 align: 0x400000
[0042.414] I> allocated(CO:33) base:0x269000000 size:0x400000 align: 0x200000
[0042.421] I> allocated(CO:23) base:0x26c000000 size:0x200000 align: 0x200000
[0042.428] I> allocated(CO:01) base:0x268f00000 size:0x100000 align: 0x100000
[0042.435] I> allocated(CO:04) base:0x268e00000 size:0x100000 align: 0x100000
[0042.442] I> allocated(CO:05) base:0x268d00000 size:0x100000 align: 0x100000
[0042.449] I> allocated(CO:08) base:0x268c00000 size:0x100000 align: 0x100000
[0042.456] I> allocated(CO:09) base:0x268b00000 size:0x100000 align: 0x100000
[0042.462] I> allocated(CO:15) base:0x268a00000 size:0x100000 align: 0x100000
[0042.469] I> allocated(CO:17) base:0x268900000 size:0x100000 align: 0x100000
[0042.476] I> allocated(CO:27) base:0x268800000 size:0x100000 align: 0x100000
[0042.483] I> allocated(CO:42) base:0x268700000 size:0x100000 align: 0x100000
[0042.490] I> allocated(CO:54) base:0x268680000 size:0x80000 align: 0x80000
[0042.497] I> allocated(CO:34) base:0x268670000 size:0x10000 align: 0x10000
[0042.504] I> allocated(CO:46) base:0x240000000 size:0x20000000 align: 0x20000000
[0042.511] I> allocated(CO:47) base:0x268200000 size:0x400000 align: 0x200000
[0042.518] I> allocated(CO:72) base:0x268000000 size:0x200000 align: 0x10000
[0042.525] I> allocated(CO:48) base:0x268650000 size:0x20000 align: 0x10000
[0042.531] I> allocated(CO:69) base:0x268630000 size:0x20000 align: 0x10000
[0042.538] I> allocated(CO:49) base:0x268620000 size:0x10000 align: 0x10000
[0042.545] I> allocated(CO:50) base:0x268610000 size:0x10000 align: 0x10000
[0042.552] I> NSDRAM base: 0x80000000, end: 0x268670000
[0042.557] I> Task: Thermal check (0x50021d55)
[0042.561] I> max_chip_limit = 105
[0042.564] I> min_chip_limit = -28
[0042.567] I> max temp read = 59
[0042.570] I> min temp read = 53
[0042.573] I> Task: Update FSI SCR with thermal fuse data (0x50021e61)
[0042.579] I> Task: Enable WDT 5th expiry (0x50021a41)
[0042.584] I> Task: I2C register (0x50000b85)
[0042.588] I> Task: Reset FSI (0x500148b1)
[0042.592] I> Task: Pinmux init (0x5001397d)
[0042.597] I> skipped mmio_addr = 0x9240008
[0042.601] I> skipped mmio_addr = 0x9240000
[0042.605] I> skipped mmio_addr = 0x9240010
[0042.609] I> skipped mmio_addr = 0x9240018
[0042.612] I> skipped mmio_addr = 0x9240020
[0042.616] I> skipped mmio_addr = 0x9240030
[0042.620] I> skipped mmio_addr = 0x9240028
[0042.624] I> skipped mmio_addr = 0x9240038
[0042.628] I> skipped mmio_addr = 0x9240040
[0042.632] I> skipped mmio_addr = 0x9240048
[0042.636] I> skipped mmio_addr = 0x9241000
[0042.640] I> skipped mmio_addr = 0x9241008
[0042.644] I> skipped mmio_addr = 0x9241010
[0042.648] I> skipped mmio_addr = 0x9241018
[0042.652] I> skipped mmio_addr = 0x9241020
[0042.656] I> skipped mmio_addr = 0x9241028
[0042.660] I> skipped mmio_addr = 0x9241030
[0042.664] I> skipped mmio_addr = 0x9241038
[0042.668] I> skipped mmio_addr = 0x9241040
[0042.671] I> skipped mmio_addr = 0x9242000
[0042.675] I> skipped mmio_addr = 0x9242008
[0042.679] I> Task: Prod config init (0x50013ddd)
[0042.684] I> Task: Pad voltage init (0x50013a2d)
[0042.688] I> Task: Prod init (0x50013e21)
[0042.692] I> Task: Common rail init (0x50014575)
[0042.697] I> DONE: Thermal config
[0042.701] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod.
[0042.709] I> DONE: SOC rail config
[0042.713] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT.
[0042.719] I> DONE: MEMIO rail config
[0042.723] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT.
[0042.729] I> DONE: GPU rail info
[0042.733] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT.
[0042.739] I> DONE: CV rail info
[0042.742] I> Task: Mem clock src (0x50011de9)
[0042.746] I> Task: Misc. board config (0x5001461d)
[0042.751] W> PMIC_CONFIG: Platform config not found in MB1 BCT.
[0042.756] I> Task: SDRAM init (0x50011ded)
[0042.760] I> SDRAM-params @ 0xd485000
[0042.764] I> MemoryType: 4 MemBctRevision: 1
[0042.770] I> MSS code-drop: NvBootSdramInit
[0042.774] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1
[0042.782] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1
[0042.789] I> MSS CAR: Init PLLM
[0042.792] I> MSS CAR: Init PLLHUB
[0042.797] I> Encryption:   MTS: en, TX: en, VPR: en, GSC: en
[0042.808] I> mb1_sdram_init Done !
[0042.812] I> SDRAM Size in Total 0x200000000
[0042.816] I> Task: Dram Ecc scrub (0x500116f5)
[0042.820] I> Task: DRAM alias check (0x50011fbd)
[0042.832] I> Task: Program NSDRAM carveout (0x50015961)
[0042.838] I> NSDRAM carveout encryption is enabled
[0042.843] I> Program NSDRAM carveout
[0042.847] I> Task: Register checker (0x50011fc1)
[0042.855] I> Task: Enable clock-mon (0x50020a35)
[0042.861] I> FMON: Fmon re-programming done
[0042.866] I> Task: Mapper init (0x5001ef4d)
[0042.871] I> Task: SC7 Context Init (0x50020d3d)
[0042.877] I> Task: CCPLEX IST init (0x5000c925)
[0042.883] I> Task: CPU WP0 (0x5000bb15)
[0042.888] I> Loading MCE
[0042.891] I> Slot: 0
[0042.893] I> Binary[8] block-0 (partition size: 0x80000)
[0042.899] I>  get_binary_info: Binary name: MCE
[0042.904] I> Size of crypto header is 8192
[0042.909] I> BCH load address is : 0x4003e000
[0042.914] I> Size of crypto header is 8192
[0043.897] I> BCH of MCE read from storage
[0043.902] I> BCH address is : 0x4003e000
[0043.907] I> MCE header integrity check is success
[0043.912] I> Binary magic in BCH component 0 is MTSM
[0043.918] I> component binary type is 8
[0043.922] I> Size of crypto header is 8192
[0043.933] I> MCE binary is read from storage
[0043.939] I> MCE binary integrity check is success
[0043.944] I> Binary MCE loaded successfully at 0x40000000 (0x2c880)
[0043.952] I> Size of crypto header is 8192
[0043.957] I> Sending WP0 mailbox command to PSC
[0043.967] I> Task: XUSB Powergate (0x50000b91)
[0043.973] I> Skipping powergate XUSB.
[0043.977] I> Task: MB1 fixed firewalls (0x5002006d)
[0043.989] W> Firewall readback mismatch
[0043.993] W> Firewall readback mismatch
[0044.002] W> Firewall readback mismatch
[0044.012] I> Task: Load bpmp-fw (0x500203c9)
[0044.017] I> Slot: 0
[0044.020] I> Binary[15] block-0 (partition size: 0x180000)
[0044.026] I>  get_binary_info: Binary name: BPMP_FW
[0044.031] I> Size of crypto header is 8192
[0044.036] I> BCH load address is : 0x807fe000
[0044.042] I> Size of crypto header is 8192
[0044.047] I> BCH of BPMP_FW read from storage
[0044.051] I> BCH address is : 0x807fe000
[0044.057] I> BPMP_FW header integrity check is success
[0044.062] I> Binary magic in BCH component 0 is BPMF
[0044.068] I> component binary type is 15
[0044.072] I> Size of crypto header is 8192
[0044.114] I> BPMP_FW binary is read from storage
[0044.122] I> BPMP_FW binary integrity check is success
[0044.127] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfddc0)
[0044.135] I> Slot: 0
[0044.138] I> Binary[16] block-251658752 (partition size: 0x400000)
[0044.146] I>  get_binary_info: Binary name: BPMP_FW_DTB
[0044.151] I> Size of crypto header is 8192
[0044.156] I> BCH load address is : 0x807fc000
[0044.161] I> Size of crypto header is 8192
[0044.166] I> BCH of BPMP_FW_DTB read from storage
[0044.172] I> BCH address is : 0x807fc000
[0044.177] I> BPMP_FW_DTB header integrity check is success
[0044.183] I> Binary magic in BCH component 0 is BPMD
[0044.188] I> component binary type is 16
[0044.193] I> Size of crypto header is 8192
[0044.202] I> BPMP_FW_DTB binary is read from storage
[0044.208] I> BPMP_FW_DTB binary integrity check is success
[0044.214] I> Binary BPMP_FW_DTB loaded successfully at 0x807dc170 (0x1fe80)
[0044.223] I> Task: Load psc-fw (0x50020551)
[0044.229] I> Slot: 0
[0044.231] I> Binary[17] block-0 (partition size: 0xc0000)
[0044.238] I>  get_binary_info: Binary name: PSC_FW
[0044.243] I> Size of crypto header is 8192
[0044.248] I> BCH load address is : 0x80ffe000
[0044.253] I> Size of crypto header is 8192
[0044.258] I> BCH of PSC_FW read from storage
[0044.263] I> BCH address is : 0x80ffe000
[0044.268] I> PSC_FW header integrity check is success
[0044.274] I> Binary magic in BCH component 0 is PFWP
[0044.279] I> component binary type is 17
[0044.283] I> Size of crypto header is 8192
[0044.301] I> PSC_FW binary is read from storage
[0044.307] I> PSC_FW binary integrity check is success
[0044.313] I> Binary PSC_FW loaded successfully at 0x80000000 (0x59980)
[0044.321] I> Task: Load nvdec-fw (0x500205c5)
[0044.327] I> Slot: 0
[0044.329] I> Binary[7] block-0 (partition size: 0x100000)
[0044.336] I>  get_binary_info: Binary name: NVDEC
[0044.341] I> Size of crypto header is 8192
[0044.345] I> BCH load address is : 0x800fe000
[0044.351] I> Size of crypto header is 8192
[0044.356] I> BCH of NVDEC read from storage
[0044.360] I> BCH address is : 0x800fe000
[0044.366] I> NVDEC header integrity check is success
[0044.371] I> Binary magic in BCH component 0 is NDEC
[0044.377] I> component binary type is 7
[0044.381] I> Size of crypto header is 8192
[0044.396] I> NVDEC binary is read from storage
[0044.402] I> NVDEC binary integrity check is success
[0044.407] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000)
[0044.418] I> Task: Load tsec-fw (0x5002097d)
[0044.423] I> TSEC-FW load support not enabled
[0044.428] I> Task: GPIO interrupt map (0x500147b5)
[0044.434] I> Task: SC7 context save (0x50020d79)
[0044.440] I> Task: Load MB2/Applet/FSKP (0x5000ca55)
[0044.446] I> Loading MB2
[0044.449] I> Slot: 0
[0044.452] I> Binary[6] block-0 (partition size: 0x80000)
[0044.458] I>  get_binary_info: Binary name: MB2
[0044.463] I> Size of crypto header is 8192
[0044.467] I> BCH load address is : 0x8007e000
[0044.473] I> Size of crypto header is 8192
[0044.478] I> BCH of MB2 read from storage
[0044.482] I> BCH address is : 0x8007e000
[0044.488] I> MB2 header integrity check is success
[0044.493] I> Binary magic in BCH component 0 is MB2B
[0044.498] I> component binary type is 6
[0044.502] I> Size of crypto header is 8192
[0044.523] I> MB2 binary is read from storage
[0044.529] I> MB2 binary integrity check is success
[0044.534] I> Binary MB2 loaded successfully at 0x80000000 (0x68ee0)
[0044.542] I> Task: Map CCPLEX SHARED carveout (0x5000cbf9)
[0044.549] I> Task: Prepare MB2 params (0x5000cca9)
[0044.556] I> BR-BCT Boot Chain Fields
[0044.560] I> 	 u32_non_gpio_select_boot_chain  : 0
[0044.565] I> 	 u32_num_boot_chains             : 2
[0044.570] I> 	 bf_bl_gpio_select_boot_chain_1b : 0
[0044.576] I> Task: Dram ecc test (0x50011791)
[0044.581] I> Task: Misc NV security settings (0x5000c529)
[0044.588] I> NVDEC sticky bits programming done
[0044.593] I> Successfully powergated NVDEC
[0044.597] I> Task: Disable/Reload WDT (0x50021a99)
[0044.603] I> Task: Program misc carveouts (0x50015381)
[0044.610] I> Program IPC carveouts
[0044.617] I> SLCG Global override status := 0x0
[0044.622] I> MB1: MSS reconfig completed
I> MB2 (version: 0.0.0.0-t234-54845784-9c429857)
I> t234-A01-0-Silicon (0x12347)
I> Boot-mode : RCM Flash
I> Emulation: 
I> Entry timestamp: 0x02a97721
I> Regular heap: [base:0x40040000, size:0x10000]
I> DMA heap: [base:0x269800000, size:0x800000]
I> Task: ARI update carveout TZDRAM (0x50001e80)
I> Task: PSC mailbox init (0x50016a7c)
I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e2c)
I> Task: Program CBB PCIE AMAP regions (0x50019b64)
I> Task: Boot device init (0x50001d74)
I> Boot_device: QSPI_FLASH instance: 0
I> Qspi clock source : pllc_out0
I> QSPI-0l initialized successfully
I> Initializing nvme device instance 4
I> Initializing nvme controller
I> tegrabl_pcie_soc_preinit: (4):
I> Unpowergate
I> PCIE unpowergating successful
I> tegrabl_pcie_soc_init: (4):
I> APPL initialization ...
I> PCIe controller-4 link is up
I> tegra_pcie_info[4].cfg0_base = 0x36000000
I> tegra_pcie_info[4].cfg1_base = 0x36020000
I> tegra_pcie_info[4].atu_dma_base = 0x36040000
I> tegra_pcie_bus[4].mem = 0x36200000
I> Scanning busnr: 0 devfn: 0
I> PCIe IDs: 0x229c10de
I> PCIe RID_CC: 0x60400a1
I> Scanning busnr: 1 devfn: 0
I> PCIe IDs: 0xa808144d
I> PCIe RID_CC: 0x1080200
I> PCI Config: I/O=0x36100000, Memory=0x36200000
I> MEM64 bar_num=0 bar=0x36200000
I> Number of PCIe devices detected: 2
I> NVME page size: 4096
I> NVMe serial number: S4EVNM0T115763E     
I> NVMe model number: Samsung SSD 970 EVO Plus 500GB          
I> NVMe firmware revision: 2B2QEXM7
I> block_count: 976773168
I> supported_lba: 0
I> block_size_log2: 0x9
I> tegrabl_create_io_queue_cmd: queue size: 2
I> tegrabl_create_io_queue_cmd: queue size: 2
I> nvme device id 000c0004
I> Task: Partition Manager Init (0x50001d70)
W> Cannot find any partition table for 00030000
 > PARTITION_MANAGER: Failed to publish partition.
W> Cannot find any partition table for 000c0004
 > PARTITION_MANAGER: Failed to publish partition.
I> Task: Trigger mailbox for PSC-BL1 exit (0x50016afc)
I> Sending opcode 0x4d420802 to psc
I> Received ACK from psc
I> Task: Enter 3p server (0x50001f18)
I> USB configuration success
I> Populate storage info
I> Erasing device 3: 0
I> QSPI: Erasing entire device
I> Writing device 3: 0.
W> Cannot find any partition table for 00030000
E> NV3P_SERVER: Failed to initialize partition table from GPT