=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.10.02 11:23:56 =~=~=~=~=~=~=~=~=~=~=~= �� [0044.937] I> MB1 (version: 0.32.0.0-t234-54845784-57325615) [0044.942] I> t234-A01-0-Silicon (0x12347) Prod [0044.947] I> Boot-mode : BPMP Diagnostic [0044.950] I> Emulation: [0044.953] I> Entry timestamp: 0x00000000 [0044.957] I> last_boot_error: 0x0 [0044.960] I> BR-BCT: preprod_dev_sign: 0 [0044.963] I> rst_source: 0x0, rst_level: 0x0 [0044.968] I> Task: Initialize MB2 params (0x5000cb51) [0044.973] I> MB2-params @ 0x40060000 [0044.976] I> Task: Crypto init (0x5001d981) [0044.980] I> Task: Secure debug controls (0x5000c0a9) [0044.985] I> Task: strap war set (0x5000ba2d) [0044.990] I> Task: Program NV master stream id (0x5000c05d) [0044.995] I> Task: Verify boot mode (0xd4820f1) [0045.001] I> Task: Alias fuses (0x5001095d) [0045.006] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0045.013] I> Task: Print SKU type (0x5000f5f1) [0045.017] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c8 [0045.022] I> FUSE_OPT_GPC_DISABLE = 0x00000001 [0045.026] I> FUSE_OPT_TPC_DISABLE = 0x0000000f [0045.031] I> FUSE_OPT_DLA_DISABLE = 0x00000002 [0045.035] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0045.039] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0045.044] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0045.048] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0045.052] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0045.057] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0045.061] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0045.065] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0045.069] I> FUSE_SKU_INFO_0 = 0xd4 [0045.072] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0045.076] I> FUSE_PACKAGE_INFO_0 = 0x2 [0045.080] I> SKU: Prod [0045.082] I> Task: Boost clocks (0x500148a1) [0045.086] I> Initializing PLLC2 for AXI_CBB. [0045.091] I> AXI_CBB : src = 35, divisor = 0 [0045.095] I> Task: Voltage monitor (0x50014b49) [0045.099] I> VMON: Vmon re-calibration and fine tuning done [0045.105] I> Task: UPHY init (0x5000d065) [0045.109] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0045.115] I> Task: Boot device init (0x50000be9) [0045.119] I> Boot_device: RCM [0045.122] I> USB configuration success [0045.126] I> Task: TSC init (0x50020a4d) [0045.130] I> Task: Enable WDT 5th expiry (0x50021a41) [0045.135] I> Task: I2C register (0x50000b85) [0045.139] I> Task: Reset FSI (0x500148b1) [0045.143] I> Task: Enable clock-mon (0x50020a35) [0045.148] I> FMON: Fmon re-programming done [0045.152] I> Task: MB1 fixed firewalls (0x5002006d) [0045.158] W> Firewall readback mismatch [0045.162] W> Firewall readback mismatch [0045.167] W> Firewall readback mismatch [0045.172] I> Task: Load MB2/Applet/FSKP (0x5000ca55) [0045.177] I> Loading MB2 Applet [0045.180] I> Slot: 0 [0045.182] I> Binary[21] block-0 (partition size: 0x50000) [0045.187] I> get_binary_info: Binary name: MB2-Applet [0045.192] I> Size of crypto header is 8192 [0045.196] I> BCH load address is : 0x4004e000 [0045.200] I> Size of crypto header is 8192 [0045.204] I> BCH of MB2-Applet read from storage [0045.209] I> BCH address is : 0x4004e000 [0045.213] I> MB2-Applet header integrity check is success [0045.218] I> Binary magic in BCH component 0 is MB2A [0045.223] I> component binary type is 21 [0045.227] I> Size of crypto header is 8192 [0045.245] I> MB2-Applet binary is read from storage [0045.251] I> MB2-Applet binary integrity check is success [0045.256] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b40) [0045.263] I> Task: Map CCPLEX SHARED carveout (0x5000cbf9) [0045.268] I> Task: Prepare MB2 params (0x5000cca9) [0045.273] I> BR-BCT Boot Chain Fields [0045.277] I> u32_non_gpio_select_boot_chain : 0 [0045.281] I> u32_num_boot_chains : 0 [0045.286] I> bf_bl_gpio_select_boot_chain_1b : 0 [0045.290] I> Task: Misc NV security settings (0x5000c529) [0045.296] I> NVDEC sticky bits programming done [0045.300] I> Successfully powergated NVDEC [0045.304] I> Task: Disable/Reload WDT (0x50021a99) [0045.309] I> Task: Program misc carveouts (0x50015381) [0045.314] I> SLCG Global override status := 0x0 [0045.318] I> MB1: MSS reconfig completed [0045.322] W> Firewall readback mismatch [0045.326] W> Firewall readback mismatch [0045.329] W> Firewall readback mismatch [0045.333] W> Firewall readback mismatch [0045.337] W> Firewall readback mismatch [0045.340] W> Firewall readback mismatch [0045.344] W> Firewall readback mismatch [0045.348] W> Firewall readback mismatch [0045.351] W> Firewall readback mismatch [0045.355] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-f44287d2) I> t234-A01-0-Silicon (0x12347) I> Emulation: I> Entry timestamp: 0xffffffff I> Task: Pinmux init (0x4000062d) I> Task: Boot device init (0x400012e5) I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI-0l initialized successfully E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> Failed to open sdmmc-3, err = 39390706 W> Ignoring init failure for device 0-3 E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> Failed to open sdmmc-3, err = 39390706 W> Ignoring init failure for device 1-3 E> Unknown device 7 E> Unknown device 8 I> Task: Partition Manager Init (0x40002d25) W> Cannot find any partition table for 00030000 > PARTITION_MANAGER: Failed to publish partition. I> Task: I2C register (0x400006a5) I> Task: Register exit handlers (0x400005f5) I> Task: Enter 3p server (0x400018e9) I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000021 I> Populate eeprom info I> Populate eeprom info for module cvm I> Rebooting : reboot-recovery �� [0004.230] I> MB1 (version: 0.32.0.0-t234-54845784-57325615) [0004.235] I> t234-A01-0-Silicon (0x12347) Prod [0004.240] I> Boot-mode : BPMP Diagnostic [0004.243] I> Emulation: [0004.246] I> Entry timestamp: 0x00000000 [0004.249] I> last_boot_error: 0x0 [0004.253] I> BR-BCT: preprod_dev_sign: 0 [0004.256] I> rst_source: 0xb, rst_level: 0x1 [0004.260] I> Task: Initialize MB2 params (0x5000cb51) [0004.266] I> MB2-params @ 0x40060000 [0004.269] I> Task: Crypto init (0x5001d981) [0004.273] I> Task: Secure debug controls (0x5000c0a9) [0004.278] I> Task: strap war set (0x5000ba2d) [0004.282] I> Task: Program NV master stream id (0x5000c05d) [0004.288] I> Task: Verify boot mode (0xd4820f1) [0004.294] I> Task: Alias fuses (0x5001095d) [0004.298] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0004.305] I> Task: Print SKU type (0x5000f5f1) [0004.310] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c8 [0004.315] I> FUSE_OPT_GPC_DISABLE = 0x00000001 [0004.319] I> FUSE_OPT_TPC_DISABLE = 0x0000000f [0004.323] I> FUSE_OPT_DLA_DISABLE = 0x00000002 [0004.328] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0004.332] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0004.336] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0004.341] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0004.345] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0004.349] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0004.353] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0004.358] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0004.362] I> FUSE_SKU_INFO_0 = 0xd4 [0004.365] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0004.369] I> FUSE_PACKAGE_INFO_0 = 0x2 [0004.373] I> SKU: Prod [0004.375] I> Task: Boost clocks (0x500148a1) [0004.379] I> Initializing PLLC2 for AXI_CBB. [0004.383] I> AXI_CBB : src = 35, divisor = 0 [0004.387] I> Task: Voltage monitor (0x50014b49) [0004.392] I> VMON: Vmon re-calibration and fine tuning done [0004.397] I> Task: UPHY init (0x5000d065) [0004.402] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0004.407] I> Task: Boot device init (0x50000be9) [0004.412] I> Boot_device: RCM [0004.415] I> USB configuration success [0004.418] I> Task: TSC init (0x50020a4d) [0004.422] I> Task: Enable WDT 5th expiry (0x50021a41) [0004.427] I> Task: I2C register (0x50000b85) [0004.431] I> Task: Reset FSI (0x500148b1) [0004.435] I> Task: Enable clock-mon (0x50020a35) [0004.440] I> FMON: Fmon re-programming done [0004.444] I> Task: MB1 fixed firewalls (0x5002006d) [0004.451] W> Firewall readback mismatch [0004.454] W> Firewall readback mismatch [0004.459] W> Firewall readback mismatch [0004.464] I> Task: Load MB2/Applet/FSKP (0x5000ca55) [0004.469] I> Loading MB2 Applet [0004.472] I> Slot: 0 [0004.474] I> Binary[21] block-0 (partition size: 0x50000) [0004.479] I> get_binary_info: Binary name: MB2-Applet [0004.484] I> Size of crypto header is 8192 [0004.488] I> BCH load address is : 0x4004e000 [0004.492] I> Size of crypto header is 8192 [0004.497] I> BCH of MB2-Applet read from storage [0004.501] I> BCH address is : 0x4004e000 [0004.505] I> MB2-Applet header integrity check is success [0004.510] I> Binary magic in BCH component 0 is MB2A [0004.515] I> component binary type is 21 [0004.519] I> Size of crypto header is 8192 [0004.538] I> MB2-Applet binary is read from storage [0004.543] I> MB2-Applet binary integrity check is success [0004.548] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b40) [0004.555] I> Task: Map CCPLEX SHARED carveout (0x5000cbf9) [0004.560] I> Task: Prepare MB2 params (0x5000cca9) [0004.565] I> BR-BCT Boot Chain Fields [0004.569] I> u32_non_gpio_select_boot_chain : 0 [0004.573] I> u32_num_boot_chains : 0 [0004.578] I> bf_bl_gpio_select_boot_chain_1b : 0 [0004.583] I> Task: Misc NV security settings (0x5000c529) [0004.588] I> NVDEC sticky bits programming done [0004.593] I> Successfully powergated NVDEC [0004.596] I> Task: Disable/Reload WDT (0x50021a99) [0004.601] I> Task: Program misc carveouts (0x50015381) [0004.606] I> SLCG Global override status := 0x0 [0004.611] I> MB1: MSS reconfig completed [0004.614] W> Firewall readback mismatch [0004.618] W> Firewall readback mismatch [0004.622] W> Firewall readback mismatch [0004.625] W> Firewall readback mismatch [0004.629] W> Firewall readback mismatch [0004.633] W> Firewall readback mismatch [0004.636] W> Firewall readback mismatch [0004.640] W> Firewall readback mismatch [0004.644] W> Firewall readback mismatch [0004.647] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-f44287d2) I> t234-A01-0-Silicon (0x12347) I> Emulation: I> Entry timestamp: 0xffffffff I> Task: Pinmux init (0x4000062d) I> Task: Boot device init (0x400012e5) I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI-0l initialized successfully E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> Failed to open sdmmc-3, err = 39390706 W> Ignoring init failure for device 0-3 E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> Failed to open sdmmc-3, err = 39390706 W> Ignoring init failure for device 1-3 E> Unknown device 7 E> Unknown device 8 I> Task: Partition Manager Init (0x40002d25) W> Cannot find any partition table for 00030000 > PARTITION_MANAGER: Failed to publish partition. I> Task: I2C register (0x400006a5) I> Task: Register exit handlers (0x400005f5) I> Task: Enter 3p server (0x400018e9) I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000021 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> Rebooting : reboot-recovery �� [0016.860] I> MB1 (version: 0.32.0.0-t234-54845784-57325615) [0016.865] I> t234-A01-0-Silicon (0x12347) Prod [0016.869] I> Boot-mode : BPMP Diagnostic [0016.873] I> Emulation: [0016.875] I> Entry timestamp: 0x00000000 [0016.879] I> last_boot_error: 0x0 [0016.882] I> BR-BCT: preprod_dev_sign: 0 [0016.886] I> rst_source: 0xb, rst_level: 0x1 [0016.890] I> Task: Initialize MB2 params (0x5000cb51) [0016.896] I> MB2-params @ 0x40060000 [0016.899] I> Task: Crypto init (0x5001d981) [0016.903] I> Task: Secure debug controls (0x5000c0a9) [0016.908] I> Task: strap war set (0x5000ba2d) [0016.912] I> Task: Program NV master stream id (0x5000c05d) [0016.918] I> Task: Verify boot mode (0xd4820f1) [0016.924] I> Task: Alias fuses (0x5001095d) [0016.928] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0016.935] I> Task: Print SKU type (0x5000f5f1) [0016.939] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c8 [0016.944] I> FUSE_OPT_GPC_DISABLE = 0x00000001 [0016.949] I> FUSE_OPT_TPC_DISABLE = 0x0000000f [0016.953] I> FUSE_OPT_DLA_DISABLE = 0x00000002 [0016.957] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0016.961] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0016.966] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0016.970] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0016.975] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0016.979] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0016.983] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0016.987] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0016.991] I> FUSE_SKU_INFO_0 = 0xd4 [0016.995] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0016.999] I> FUSE_PACKAGE_INFO_0 = 0x2 [0017.002] I> SKU: Prod [0017.005] I> Task: Boost clocks (0x500148a1) [0017.009] I> Initializing PLLC2 for AXI_CBB. [0017.013] I> AXI_CBB : src = 35, divisor = 0 [0017.017] I> Task: Voltage monitor (0x50014b49) [0017.021] I> VMON: Vmon re-calibration and fine tuning done [0017.027] I> Task: UPHY init (0x5000d065) [0017.031] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0017.036] I> Task: Boot device init (0x50000be9) [0017.041] I> Boot_device: RCM [0017.044] I> USB configuration success [0017.048] I> Task: TSC init (0x50020a4d) [0017.052] I> Task: Enable WDT 5th expiry (0x50021a41) [0017.056] I> Task: I2C register (0x50000b85) [0017.061] I> Task: Reset FSI (0x500148b1) [0017.064] I> Task: Enable clock-mon (0x50020a35) [0017.070] I> FMON: Fmon re-programming done [0017.074] I> Task: MB1 fixed firewalls (0x5002006d) [0017.080] W> Firewall readback mismatch [0017.084] W> Firewall readback mismatch [0017.088] W> Firewall readback mismatch [0017.093] I> Task: Load MB2/Applet/FSKP (0x5000ca55) [0017.098] I> Loading MB2 Applet [0017.101] I> Slot: 0 [0017.103] I> Binary[21] block-0 (partition size: 0x50000) [0017.109] I> get_binary_info: Binary name: MB2-Applet [0017.114] I> Size of crypto header is 8192 [0017.118] I> BCH load address is : 0x4004e000 [0017.122] I> Size of crypto header is 8192 [0017.126] I> BCH of MB2-Applet read from storage [0017.131] I> BCH address is : 0x4004e000 [0017.135] I> MB2-Applet header integrity check is success [0017.140] I> Binary magic in BCH component 0 is MB2A [0017.145] I> component binary type is 21 [0017.148] I> Size of crypto header is 8192 [0017.167] I> MB2-Applet binary is read from storage [0017.172] I> MB2-Applet binary integrity check is success [0017.177] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b40) [0017.184] I> Task: Map CCPLEX SHARED carveout (0x5000cbf9) [0017.190] I> Task: Prepare MB2 params (0x5000cca9) [0017.195] I> BR-BCT Boot Chain Fields [0017.198] I> u32_non_gpio_select_boot_chain : 0 [0017.203] I> u32_num_boot_chains : 0 [0017.207] I> bf_bl_gpio_select_boot_chain_1b : 0 [0017.212] I> Task: Misc NV security settings (0x5000c529) [0017.217] I> NVDEC sticky bits programming done [0017.222] I> Successfully powergated NVDEC [0017.226] I> Task: Disable/Reload WDT (0x50021a99) [0017.230] I> Task: Program misc carveouts (0x50015381) [0017.235] I> SLCG Global override status := 0x0 [0017.240] I> MB1: MSS reconfig completed [0017.244] W> Firewall readback mismatch [0017.247] W> Firewall readback mismatch [0017.251] W> Firewall readback mismatch [0017.255] W> Firewall readback mismatch [0017.258] W> Firewall readback mismatch [0017.262] W> Firewall readback mismatch [0017.266] W> Firewall readback mismatch [0017.269] W> Firewall readback mismatch [0017.273] W> Firewall readback mismatch [0017.277] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-f44287d2) I> t234-A01-0-Silicon (0x12347) I> Emulation: I> Entry timestamp: 0xffffffff I> Task: Pinmux init (0x4000062d) I> Task: Boot device init (0x400012e5) I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI-0l initialized successfully E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> Failed to open sdmmc-3, err = 39390706 W> Ignoring init failure for device 0-3 E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> Failed to open sdmmc-3, err = 39390706 W> Ignoring init failure for device 1-3 E> Unknown device 7 E> Unknown device 8 I> Task: Partition Manager Init (0x40002d25) W> Cannot find any partition table for 00030000 > PARTITION_MANAGER: Failed to publish partition. I> Task: I2C register (0x400006a5) I> Task: Register exit handlers (0x400005f5) I> Task: Enter 3p server (0x400018e9) I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000021 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> Rebooting : reboot-recovery �� [0071.943] I> MB1 (version: 0.32.0.0-t234-54845784-57325615) [0071.949] I> t234-A01-0-Silicon (0x12347) Prod [0071.953] I> Boot-mode : BPMP Diagnostic [0071.957] I> Emulation: [0071.959] I> Entry timestamp: 0x00000000 [0071.963] I> last_boot_error: 0x0 [0071.966] I> BR-BCT: preprod_dev_sign: 0 [0071.970] I> rst_source: 0xb, rst_level: 0x1 [0071.974] I> Task: Initialize MB2 params (0x5000cb51) [0071.979] I> MB2-params @ 0x40060000 [0071.983] I> Task: Crypto init (0x5001d981) [0071.987] I> Task: Secure debug controls (0x5000c0a9) [0071.992] I> Task: strap war set (0x5000ba2d) [0071.996] I> Task: Program NV master stream id (0x5000c05d) [0072.002] I> Task: Verify boot mode (0xd4820f1) [0072.007] I> Task: Alias fuses (0x5001095d) [0072.013] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0072.020] I> Task: Print SKU type (0x5000f5f1) [0072.024] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c8 [0072.029] I> FUSE_OPT_GPC_DISABLE = 0x00000001 [0072.033] I> FUSE_OPT_TPC_DISABLE = 0x0000000f [0072.038] I> FUSE_OPT_DLA_DISABLE = 0x00000002 [0072.042] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0072.046] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0072.051] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0072.055] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0072.059] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0072.064] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0072.068] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0072.072] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0072.076] I> FUSE_SKU_INFO_0 = 0xd4 [0072.079] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0072.083] I> FUSE_PACKAGE_INFO_0 = 0x2 [0072.087] I> SKU: Prod [0072.089] I> Task: Boost clocks (0x500148a1) [0072.093] I> Initializing PLLC2 for AXI_CBB. [0072.098] I> AXI_CBB : src = 35, divisor = 0 [0072.102] I> Task: Voltage monitor (0x50014b49) [0072.106] I> VMON: Vmon re-calibration and fine tuning done [0072.112] I> Task: UPHY init (0x5000d065) [0072.116] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0072.122] I> Task: Boot device init (0x50000be9) [0072.126] I> Boot_device: RCM [0072.129] I> USB configuration success [0072.133] I> Task: TSC init (0x50020a4d) [0072.137] I> Task: Enable WDT 5th expiry (0x50021a41) [0072.142] I> Task: I2C register (0x50000b85) [0072.146] I> Task: Reset FSI (0x500148b1) [0072.150] I> Task: Enable clock-mon (0x50020a35) [0072.155] I> FMON: Fmon re-programming done [0072.159] I> Task: MB1 fixed firewalls (0x5002006d) [0072.165] W> Firewall readback mismatch [0072.169] W> Firewall readback mismatch [0072.174] W> Firewall readback mismatch [0072.179] I> Task: Load MB2/Applet/FSKP (0x5000ca55) [0072.184] I> Loading MB2 Applet [0072.187] I> Slot: 0 [0072.189] I> Binary[21] block-0 (partition size: 0x50000) [0072.194] I> get_binary_info: Binary name: MB2-Applet [0072.199] I> Size of crypto header is 8192 [0072.203] I> BCH load address is : 0x4004e000 [0072.207] I> Size of crypto header is 8192 [0072.211] I> BCH of MB2-Applet read from storage [0072.216] I> BCH address is : 0x4004e000 [0072.220] I> MB2-Applet header integrity check is success [0072.225] I> Binary magic in BCH component 0 is MB2A [0072.230] I> component binary type is 21 [0072.234] I> Size of crypto header is 8192 [0072.252] I> MB2-Applet binary is read from storage [0072.257] I> MB2-Applet binary integrity check is success [0072.263] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b40) [0072.269] I> Task: Map CCPLEX SHARED carveout (0x5000cbf9) [0072.275] I> Task: Prepare MB2 params (0x5000cca9) [0072.280] I> BR-BCT Boot Chain Fields [0072.283] I> u32_non_gpio_select_boot_chain : 0 [0072.288] I> u32_num_boot_chains : 0 [0072.293] I> bf_bl_gpio_select_boot_chain_1b : 0 [0072.297] I> Task: Misc NV security settings (0x5000c529) [0072.303] I> NVDEC sticky bits programming done [0072.307] I> Successfully powergated NVDEC [0072.311] I> Task: Disable/Reload WDT (0x50021a99) [0072.316] I> Task: Program misc carveouts (0x50015381) [0072.321] I> SLCG Global override status := 0x0 [0072.325] I> MB1: MSS reconfig completed [0072.329] W> Firewall readback mismatch [0072.333] W> Firewall readback mismatch [0072.336] W> Firewall readback mismatch [0072.340] W> Firewall readback mismatch [0072.344] W> Firewall readback mismatch [0072.347] W> Firewall readback mismatch [0072.351] W> Firewall readback mismatch [0072.355] W> Firewall readback mismatch [0072.358] W> Firewall readback mismatch [0072.362] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-f44287d2) I> t234-A01-0-Silicon (0x12347) I> Emulation: I> Entry timestamp: 0xffffffff I> Task: Pinmux init (0x4000062d) I> Task: Boot device init (0x400012e5) I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI-0l initialized successfully E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> Failed to open sdmmc-3, err = 39390706 W> Ignoring init failure for device 0-3 E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> Failed to open sdmmc-3, err = 39390706 W> Ignoring init failure for device 1-3 E> Unknown device 7 E> Unknown device 8 I> Task: Partition Manager Init (0x40002d25) W> Cannot find any partition table for 00030000 > PARTITION_MANAGER: Failed to publish partition. I> Task: I2C register (0x400006a5) I> Task: Register exit handlers (0x400005f5) I> Task: Enter 3p server (0x400018e9) I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000021 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> Rebooting : reboot-recovery �� [0024.273] I> MB1 (version: 0.32.0.0-t234-54845784-57325615) [0024.279] I> t234-A01-0-Silicon (0x12347) Prod [0024.283] I> Boot-mode : Coldboot [0024.286] I> Emulation: [0024.288] I> Entry timestamp: 0x00000000 [0024.292] I> last_boot_error: 0x0 [0024.295] I> BR-BCT: preprod_dev_sign: 0 [0024.299] I> rst_source: 0xb, rst_level: 0x1 [0024.303] I> Task: Bootchain select WAR set (0x5000ba65) [0024.308] I> Task: Enable SLCG (0x5000bab1) [0024.312] I> Task: CRC check (0x5001ea19) [0024.316] I> Task: Initialize MB2 params (0x5000cb51) [0024.322] I> MB2-params @ 0x40060000 [0024.325] I> Task: Crypto init (0x5001d981) [0024.329] I> Task: Secure debug controls (0x5000c0a9) [0024.334] I> Task: strap war set (0x5000ba2d) [0024.338] I> Task: Initialize SOC Therm (0x5001bd35) [0024.343] I> Task: Program NV master stream id (0x5000c05d) [0024.349] I> Task: Verify boot mode (0xd4820f1) [0024.355] I> Task: Alias fuses (0x5001095d) [0024.359] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0024.366] I> Task: Print SKU type (0x5000f5f1) [0024.370] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c8 [0024.376] I> FUSE_OPT_GPC_DISABLE = 0x00000001 [0024.380] I> FUSE_OPT_TPC_DISABLE = 0x0000000f [0024.384] I> FUSE_OPT_DLA_DISABLE = 0x00000002 [0024.388] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0024.393] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0024.397] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0024.401] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0024.406] I> FUSE_OPT_EMC_DISABLE = 0x0000000c [0024.410] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0024.414] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0024.418] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0024.422] I> FUSE_SKU_INFO_0 = 0xd4 [0024.426] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0024.430] I> FUSE_PACKAGE_INFO_0 = 0x2 [0024.433] I> SKU: Prod [0024.436] I> Task: Boost clocks (0x500148a1) [0024.440] I> Initializing PLLC2 for AXI_CBB. [0024.444] I> AXI_CBB : src = 35, divisor = 0 [0024.448] I> Task: Voltage monitor (0x50014b49) [0024.453] I> VMON: Vmon re-calibration and fine tuning done [0024.458] I> Task: UPHY init (0x5000d065) [0024.464] I> HSIO UPHY init done [0024.467] E> Skipping GBE UPHY config [0024.470] I> Task: Boot device init (0x50000be9) [0024.475] I> Boot_device: RCM [0024.478] I> USB configuration success [0024.482] I> Task: TSC init (0x50020a4d) [0024.486] I> Task: Load membct (0x50011fe9) [0024.490] I> RAM_CODE 0x4000021 [0024.493] I> Loading MEMBCT [0024.495] I> Slot: 0 [0024.497] I> Binary[0] block-0 (partition size: 0x40000) [0024.503] I> get_binary_info: Binary name: MEM-BCT-0 [0024.507] I> Size of crypto header is 8192 [0024.511] I> BCH load address is : 0x40050000 [0024.516] I> Size of crypto header is 8192 [0024.520] I> BCH of MEM-BCT-0 read from storage [0024.524] I> BCH address is : 0x40050000 [0024.528] I> MEM-BCT-0 header integrity check is success [0024.533] I> Binary magic in BCH component 0 is MEM0 [0024.538] I> component binary type is 0 [0024.545] I> MEM-BCT-0 binary is read from storage [0024.550] I> MEM-BCT-0 binary integrity check is success [0024.555] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0024.562] I> RAM_CODE 0x4000021 [0024.567] I> RAM_CODE 0x4000021 [0024.571] I> Task: Load Page retirement list (0x500115b1) [0024.577] I> Task: SDRAM params override (0x50011fc5) [0024.582] I> Task: Save mem-bct info (0x50014fa1) [0024.586] I> Task: Carveout allocate (0x50015005) [0024.591] I> ECC region[0]: Start:0x0, End:0x0 [0024.595] I> ECC region[1]: Start:0x0, End:0x0 [0024.599] I> ECC region[2]: Start:0x0, End:0x0 [0024.603] I> ECC region[3]: Start:0x0, End:0x0 [0024.608] I> ECC region[4]: Start:0x0, End:0x0 [0024.612] I> Non-ECC region[0]: Start:0x80000000, End:0x280000000 [0024.618] I> Non-ECC region[1]: Start:0x0, End:0x0 [0024.623] I> Non-ECC region[2]: Start:0x0, End:0x0 [0024.627] I> Non-ECC region[3]: Start:0x0, End:0x0 [0024.632] I> Non-ECC region[4]: Start:0x0, End:0x0 [0024.642] I> allocated(CO:31) base:0x278000000 size:0x8000000 align: 0x8000000 [0024.649] I> allocated(CO:43) base:0x274000000 size:0x4000000 align: 0x200000 [0024.656] I> allocated(CO:20) base:0x272000000 size:0x2000000 align: 0x2000000 [0024.663] I> allocated(CO:24) base:0x270000000 size:0x2000000 align: 0x2000000 [0024.670] I> allocated(CO:28) base:0x26e000000 size:0x2000000 align: 0x2000000 [0024.677] I> allocated(CO:22) base:0x26d000000 size:0x1000000 align: 0x1000000 [0024.684] I> allocated(CO:35) base:0x26c200000 size:0xe00000 align: 0x10000 [0024.691] I> allocated(CO:02) base:0x26b800000 size:0x800000 align: 0x800000 [0024.698] I> allocated(CO:03) base:0x26b000000 size:0x800000 align: 0x800000 [0024.705] I> allocated(CO:06) base:0x26a800000 size:0x800000 align: 0x800000 [0024.712] I> allocated(CO:10) base:0x26a000000 size:0x800000 align: 0x800000 [0024.719] I> allocated(CO:56) base:0x269800000 size:0x800000 align: 0x200000 [0024.726] I> allocated(CO:07) base:0x269400000 size:0x400000 align: 0x400000 [0024.732] I> allocated(CO:33) base:0x269000000 size:0x400000 align: 0x200000 [0024.739] I> allocated(CO:23) base:0x26c000000 size:0x200000 align: 0x200000 [0024.746] I> allocated(CO:01) base:0x268f00000 size:0x100000 align: 0x100000 [0024.753] I> allocated(CO:04) base:0x268e00000 size:0x100000 align: 0x100000 [0024.760] I> allocated(CO:05) base:0x268d00000 size:0x100000 align: 0x100000 [0024.767] I> allocated(CO:08) base:0x268c00000 size:0x100000 align: 0x100000 [0024.774] I> allocated(CO:09) base:0x268b00000 size:0x100000 align: 0x100000 [0024.781] I> allocated(CO:15) base:0x268a00000 size:0x100000 align: 0x100000 [0024.788] I> allocated(CO:17) base:0x268900000 size:0x100000 align: 0x100000 [0024.795] I> allocated(CO:27) base:0x268800000 size:0x100000 align: 0x100000 [0024.802] I> allocated(CO:42) base:0x268700000 size:0x100000 align: 0x100000 [0024.809] I> allocated(CO:54) base:0x268680000 size:0x80000 align: 0x80000 [0024.815] I> allocated(CO:34) base:0x268670000 size:0x10000 align: 0x10000 [0024.822] I> allocated(CO:46) base:0x240000000 size:0x20000000 align: 0x20000000 [0024.829] I> allocated(CO:47) base:0x268200000 size:0x400000 align: 0x200000 [0024.836] I> allocated(CO:72) base:0x268000000 size:0x200000 align: 0x10000 [0024.843] I> allocated(CO:48) base:0x268650000 size:0x20000 align: 0x10000 [0024.850] I> allocated(CO:69) base:0x268630000 size:0x20000 align: 0x10000 [0024.857] I> allocated(CO:49) base:0x268620000 size:0x10000 align: 0x10000 [0024.863] I> allocated(CO:50) base:0x268610000 size:0x10000 align: 0x10000 [0024.870] I> NSDRAM base: 0x80000000, end: 0x268670000 [0024.875] I> Task: Thermal check (0x50021d55) [0024.879] I> max_chip_limit = 105 [0024.883] I> min_chip_limit = -28 [0024.886] I> max temp read = 46 [0024.889] I> min temp read = 45 [0024.892] I> Task: Update FSI SCR with thermal fuse data (0x50021e61) [0024.898] I> Task: Enable WDT 5th expiry (0x50021a41) [0024.903] I> Task: I2C register (0x50000b85) [0024.907] I> Task: Reset FSI (0x500148b1) [0024.911] I> Task: Pinmux init (0x5001397d) [0024.915] I> skipped mmio_addr = 0x9240008 [0024.919] I> skipped mmio_addr = 0x9240000 [0024.923] I> skipped mmio_addr = 0x9240010 [0024.927] I> skipped mmio_addr = 0x9240018 [0024.931] I> skipped mmio_addr = 0x9240020 [0024.935] I> skipped mmio_addr = 0x9240030 [0024.939] I> skipped mmio_addr = 0x9240028 [0024.943] I> skipped mmio_addr = 0x9240038 [0024.947] I> skipped mmio_addr = 0x9240040 [0024.951] I> skipped mmio_addr = 0x9240048 [0024.954] I> skipped mmio_addr = 0x9241000 [0024.958] I> skipped mmio_addr = 0x9241008 [0024.962] I> skipped mmio_addr = 0x9241010 [0024.966] I> skipped mmio_addr = 0x9241018 [0024.970] I> skipped mmio_addr = 0x9241020 [0024.974] I> skipped mmio_addr = 0x9241028 [0024.978] I> skipped mmio_addr = 0x9241030 [0024.982] I> skipped mmio_addr = 0x9241038 [0024.986] I> skipped mmio_addr = 0x9241040 [0024.990] I> skipped mmio_addr = 0x9242000 [0024.994] I> skipped mmio_addr = 0x9242008 [0024.998] I> Task: Prod config init (0x50013ddd) [0025.002] I> Task: Pad voltage init (0x50013a2d) [0025.007] I> Task: Prod init (0x50013e21) [0025.011] I> Task: Common rail init (0x50014575) [0025.015] I> DONE: Thermal config [0025.019] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0025.027] I> DONE: SOC rail config [0025.031] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0025.037] I> DONE: MEMIO rail config [0025.041] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT. [0025.047] I> DONE: GPU rail info [0025.051] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT. [0025.057] I> DONE: CV rail info [0025.060] I> Task: Mem clock src (0x50011de9) [0025.065] I> Task: Misc. board config (0x5001461d) [0025.070] W> PMIC_CONFIG: Platform config not found in MB1 BCT. [0025.076] I> Task: SDRAM init (0x50011ded) [0025.080] I> SDRAM-params @ 0xd485000 [0025.083] I> MemoryType: 4 MemBctRevision: 1 [0025.090] I> MSS code-drop: NvBootSdramInit [0025.094] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0025.101] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0025.109] I> MSS CAR: Init PLLM [0025.112] I> MSS CAR: Init PLLHUB [0025.117] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0025.128] I> mb1_sdram_init Done ! [0025.131] I> SDRAM Size in Total 0x200000000 [0025.135] I> Task: Dram Ecc scrub (0x500116f5) [0025.139] I> Task: DRAM alias check (0x50011fbd) [0025.151] I> Task: Program NSDRAM carveout (0x50015961) [0025.157] I> NSDRAM carveout encryption is enabled [0025.163] I> Program NSDRAM carveout [0025.167] I> Task: Register checker (0x50011fc1) [0025.174] I> Task: Enable clock-mon (0x50020a35) [0025.180] I> FMON: Fmon re-programming done [0025.185] I> Task: Mapper init (0x5001ef4d) [0025.190] I> Task: SC7 Context Init (0x50020d3d) [0025.196] I> Task: CCPLEX IST init (0x5000c925) [0025.202] I> Task: CPU WP0 (0x5000bb15) [0025.207] I> Loading MCE [0025.210] I> Slot: 0 [0025.212] I> Binary[8] block-0 (partition size: 0x80000) [0025.218] I> get_binary_info: Binary name: MCE [0025.223] I> Size of crypto header is 8192 [0025.228] I> BCH load address is : 0x4003e000 [0025.233] I> Size of crypto header is 8192 [0029.105] I> BCH of MCE read from storage [0029.109] I> BCH address is : 0x4003e000 [0029.114] I> MCE header integrity check is success [0029.120] I> Binary magic in BCH component 0 is MTSM [0029.125] I> component binary type is 8 [0029.129] I> Size of crypto header is 8192 [0029.141] I> MCE binary is read from storage [0029.146] I> MCE binary integrity check is success [0029.151] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0029.159] I> Size of crypto header is 8192 [0029.164] I> Sending WP0 mailbox command to PSC [0029.175] I> Task: XUSB Powergate (0x50000b91) [0029.180] I> Skipping powergate XUSB. [0029.184] I> Task: MB1 fixed firewalls (0x5002006d) [0029.196] W> Firewall readback mismatch [0029.200] W> Firewall readback mismatch [0029.209] W> Firewall readback mismatch [0029.219] I> Task: Load bpmp-fw (0x500203c9) [0029.224] I> Slot: 0 [0029.227] I> Binary[15] block-0 (partition size: 0x180000) [0029.233] I> get_binary_info: Binary name: BPMP_FW [0029.238] I> Size of crypto header is 8192 [0029.243] I> BCH load address is : 0x807fe000 [0029.249] I> Size of crypto header is 8192 [0029.254] I> BCH of BPMP_FW read from storage [0029.258] I> BCH address is : 0x807fe000 [0029.264] I> BPMP_FW header integrity check is success [0029.269] I> Binary magic in BCH component 0 is BPMF [0029.275] I> component binary type is 15 [0029.279] I> Size of crypto header is 8192 [0029.321] I> BPMP_FW binary is read from storage [0029.329] I> BPMP_FW binary integrity check is success [0029.334] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfddc0) [0029.342] I> Slot: 0 [0029.345] I> Binary[16] block-251658752 (partition size: 0x400000) [0029.353] I> get_binary_info: Binary name: BPMP_FW_DTB [0029.358] I> Size of crypto header is 8192 [0029.363] I> BCH load address is : 0x807fc000 [0029.368] I> Size of crypto header is 8192 [0029.373] I> BCH of BPMP_FW_DTB read from storage [0029.378] I> BCH address is : 0x807fc000 [0029.384] I> BPMP_FW_DTB header integrity check is success [0029.390] I> Binary magic in BCH component 0 is BPMD [0029.395] I> component binary type is 16 [0029.399] I> Size of crypto header is 8192 [0029.409] I> BPMP_FW_DTB binary is read from storage [0029.415] I> BPMP_FW_DTB binary integrity check is success [0029.421] I> Binary BPMP_FW_DTB loaded successfully at 0x807dc170 (0x1fe80) [0029.430] I> Task: Load psc-fw (0x50020551) [0029.435] I> Slot: 0 [0029.438] I> Binary[17] block-0 (partition size: 0xc0000) [0029.444] I> get_binary_info: Binary name: PSC_FW [0029.449] I> Size of crypto header is 8192 [0029.454] I> BCH load address is : 0x80ffe000 [0029.459] I> Size of crypto header is 8192 [0029.464] I> BCH of PSC_FW read from storage [0029.469] I> BCH address is : 0x80ffe000 [0029.474] I> PSC_FW header integrity check is success [0029.480] I> Binary magic in BCH component 0 is PFWP [0029.485] I> component binary type is 17 [0029.490] I> Size of crypto header is 8192 [0029.507] I> PSC_FW binary is read from storage [0029.514] I> PSC_FW binary integrity check is success [0029.519] I> Binary PSC_FW loaded successfully at 0x80000000 (0x59980) [0029.527] I> Task: Load nvdec-fw (0x500205c5) [0029.533] I> Slot: 0 [0029.535] I> Binary[7] block-0 (partition size: 0x100000) [0029.542] I> get_binary_info: Binary name: NVDEC [0029.547] I> Size of crypto header is 8192 [0029.551] I> BCH load address is : 0x800fe000 [0029.557] I> Size of crypto header is 8192 [0029.562] I> BCH of NVDEC read from storage [0029.566] I> BCH address is : 0x800fe000 [0029.572] I> NVDEC header integrity check is success [0029.577] I> Binary magic in BCH component 0 is NDEC [0029.583] I> component binary type is 7 [0029.587] I> Size of crypto header is 8192 [0029.602] I> NVDEC binary is read from storage [0029.608] I> NVDEC binary integrity check is success [0029.613] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0029.624] I> Task: Load tsec-fw (0x5002097d) [0029.629] I> TSEC-FW load support not enabled [0029.634] I> Task: GPIO interrupt map (0x500147b5) [0029.640] I> Task: SC7 context save (0x50020d79) [0029.645] I> Task: Load MB2/Applet/FSKP (0x5000ca55) [0029.652] I> Loading MB2 [0029.655] I> Slot: 0 [0029.657] I> Binary[6] block-0 (partition size: 0x80000) [0029.663] I> get_binary_info: Binary name: MB2 [0029.668] I> Size of crypto header is 8192 [0029.673] I> BCH load address is : 0x8007e000 [0029.678] I> Size of crypto header is 8192 [0029.683] I> BCH of MB2 read from storage [0029.688] I> BCH address is : 0x8007e000 [0029.693] I> MB2 header integrity check is success [0029.698] I> Binary magic in BCH component 0 is MB2B [0029.704] I> component binary type is 6 [0029.708] I> Size of crypto header is 8192 [0029.728] I> MB2 binary is read from storage [0029.734] I> MB2 binary integrity check is success [0029.739] I> Binary MB2 loaded successfully at 0x80000000 (0x68ee0) [0029.747] I> Task: Map CCPLEX SHARED carveout (0x5000cbf9) [0029.754] I> Task: Prepare MB2 params (0x5000cca9) [0029.761] I> BR-BCT Boot Chain Fields [0029.765] I> u32_non_gpio_select_boot_chain : 0 [0029.770] I> u32_num_boot_chains : 2 [0029.775] I> bf_bl_gpio_select_boot_chain_1b : 0 [0029.781] I> Task: Dram ecc test (0x50011791) [0029.786] I> Task: Misc NV security settings (0x5000c529) [0029.793] I> NVDEC sticky bits programming done [0029.798] I> Successfully powergated NVDEC [0029.802] I> Task: Disable/Reload WDT (0x50021a99) [0029.808] I> Task: Program misc carveouts (0x50015381) [0029.815] I> Program IPC carveouts [0029.822] I> SLCG Global override status := 0x0 [0029.827] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-9c429857) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : RCM BOOT I> Emulation: I> Entry timestamp: 0x01c7ba6c I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x269800000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e80) I> Task: Enable hot-plug capability (0x50026c6c) I> Task: Set blob address (0x50001e58) I> Task: PSC mailbox init (0x50016a7c) I> Task: Crypto init (0x500065a8) I> Task: Enable GP-SE clock (0x50001fe4) I> Task: DICE Identity init (0x50019e50) I> DICE is not enabled. I> Task: I2C register (0x50001e44) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e2c) I> Task: Program CBB PCIE AMAP regions (0x50019b64) I> Task: Load and authenticate registered FWs (0x5001ce48) I> Task: Load AUXP FWs (0x5002680c) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x268c00000 I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x268900000 I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x272000000 I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x269400000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x268d00000 I> Task: Carveout setup (0x5001f55c) I> Program remaining OEM carveouts I> Task: Enable FSI VMON (0x500164d8) I> Task: Restore XUSB sec (0x50001d44) I> Task: Enable FSI SE clock (0x50016ed8) I> Task: Initialize SBSA UART CAR (0x50001f48) I> Task: Initialize CPUBL Params (0x50017e0c) I> CPUBL-params @ 0x26e000000 I> Task: Prepare eeprom data (0x50017bd8) E> I2C: slave not found in slaves. E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. E> I2C_DEV: Failed to send register address 0x00000000. E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0. E> eeprom: Failed to read I2C slave device C> Task 0x0 failed (err: 0x1f1e050d) E> Top caller module: I2C_DEV, error module: I2C, reason: 0x0d, aux_info: 0x05 I> Busy Spin