root@trident-B660M-AORUS-PRO-AX-DDR4:/home/trident# minicom -s Welcome to minicom 2.7.1 OPTIONS: I18n Compiled on Dec 23 2019, 02:06:26. Port /dev/ttyUSB0, 10:33:57 Press CTRL-A Z for help on special keys �� [2776.218] I> MB1 (version: 1.4.0.2-t234-54845784-08a4de08) [2776.223] I> t234-A01-0-Silicon (0x12347) Prod [2776.227] I> Boot-mode : BPMP Diagnostic [2776.231] I> Entry timestamp: 0x00000000 [2776.235] I> last_boot_error: 0x0 [2776.238] I> BR-BCT: preprod_dev_sign: 0 [2776.242] I> rst_source: 0xb, rst_level: 0x1 [2776.246] I> Task: Initialize MB2 params [2776.250] I> MB2-params @ 0x40060000 [2776.253] I> Task: Crypto init [2776.256] I> Task: Perform MB1 KAT tests [2776.260] I> Task: NVRNG health check [2776.264] I> NVRNG: Health check success [2776.268] I> Task: Secure debug controls [2776.272] I> Task: strap war set [2776.275] I> Task: Program NV master stream id [2776.279] I> Task: Verify boot mode [2776.285] I> Task: Alias fuses [2776.288] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [2776.296] I> Task: Print SKU type [2776.299] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [2776.304] I> FUSE_OPT_GPC_DISABLE = 0x00000001 [2776.308] I> FUSE_OPT_TPC_DISABLE = 0x0000000f [2776.313] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [2776.317] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [2776.321] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [2776.326] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [2776.330] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [2776.334] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [2776.339] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [2776.343] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [2776.347] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [2776.351] I> FUSE_SKU_INFO_0 = 0xd3 [2776.354] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [2776.359] I> FUSE_PACKAGE_INFO_0 = 0x2 [2776.362] I> SKU: Prod [2776.364] I> Task: Boost clocks [2776.367] I> Initializing NAFLL for BPMP_CPU_NIC. [2776.372] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [2776.378] I> BPMP NAFLL lock success. [2776.381] I> BPMP_CPU_NIC : src = 42, divisor = 0 [2776.386] I> Initializing PLLC2 for AXI_CBB. [2776.390] I> AXI_CBB : src = 35, divisor = 0 [2776.394] I> Task: Voltage monitor [2776.398] I> VMON: Vmon re-calibration and fine tuning done [2776.403] I> Task: UPHY init [2776.406] W> UPHY: UPHY lane info table is empty in MB1 BCT. [2776.411] I> Task: Boot device init [2776.415] I> Boot_device: RCM [2776.418] I> USB configuration success [2776.421] I> Task: TSC init [2776.424] I> Task: Enable WDT 5th expiry [2776.428] I> Task: I2C register [2776.431] I> Task: Set I2C bus freq [2776.434] I> Task: Reset FSI [2776.437] I> Task: Enable clock-mon [2776.441] I> FMON: Fmon re-programming done [2776.445] I> Task: Mapper init [2776.448] I> Task: MB1 fixed firewalls [2776.455] W> Firewall readback mismatch [2776.460] I> Task: Load MB2/Applet/FSKP [2776.463] I> Loading MB2 Applet [2776.466] I> Slot: 0 [2776.468] I> Binary[21] block-352321536 (partition size: 0x50000) [2776.474] I> Binary name: MB2-Applet [2776.478] I> Size of crypto header is 8192 [2776.482] I> Size of crypto header is 8192 [2776.486] I> BCH of MB2-Applet read from storage [2776.490] I> BCH address is : 0x4004e000 [2776.494] I> MB2-Applet header integrity check is success [2776.500] I> Binary magic in BCH component 0 is MB2A [2776.504] I> component binary type is 21 [2776.508] I> Size of crypto header is 8192 [2776.519] I> MB2-Applet binary is read from storage [2776.524] I> MB2-Applet binary integrity check is success [2776.529] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x42440) [2776.536] I> Task: Prepare MB2 params [2776.540] I> Task: Misc NV security settings [2776.544] I> NVDEC sticky bits programming done [2776.549] I> Successfully powergated NVDEC [2776.553] I> Task: Disable/Reload WDT [2776.556] I> Task: Program misc carveouts [2776.560] I> Task: Disable SCPM/POD reset [2776.564] I> SLCG Global override status := 0x0 [2776.568] I> MB1: MSS reconfig completed [2776.572] W> Firewall readback mismatch [2776.576] W> Firewall readback mismatch [2776.580] W> Firewall readback mismatch [2776.583] W> Firewall readback mismatch [2776.587] W> Firewall readback mismatch [2776.591] W> Firewall readback mismatch [2776.594] W> Firewall readback mismatch [2776.598] W> Firewall readback mismatch [2776.602] W> Firewall readback mismatch [2776.605] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-b648c465) I> t234-A01-0-Silicon (0x12347) Prod I> Emulation: I> Entry timestamp: 0x00000000 I> Task: Pinmux init I> Task: Crypto init I> Task: Boot device init I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: SDMMC_BOOT instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 0-3 I> Secondary storage device: SDMMC_USER instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 1-3 I> Secondary storage device: QSPI_FLASH instance: 0 I> Task: I2C register I> Task: Register exit handlers I> Task: Enter 3p server I> USB configuration success I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Populate chip info I> RAM_CODE 0x4000001 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> strt_pg_num(0) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 1 copy of BRBCT @ 0 I> strt_pg_num(512) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 2 copy of BRBCT @ 262144 I> strt_pg_num(1024) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 3 copy of BRBCT @ 524288 I> strt_pg_num(1536) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 4 copy of BRBCT @ 786432 E> NV3P_SERVER: Failed to get address for br bct from nv3p helper. I> Rebooting : reboot-recovery �� [0149.900] I> MB1 (version: 1.4.0.2-t234-54845784-08a4de08) [0149.905] I> t234-A01-0-Silicon (0x12347) Prod [0149.909] I> Boot-mode : BPMP Diagnostic [0149.913] I> Entry timestamp: 0x00000000 [0149.917] I> last_boot_error: 0x0 [0149.920] I> BR-BCT: preprod_dev_sign: 0 [0149.924] I> rst_source: 0xb, rst_level: 0x1 [0149.928] I> Task: Initialize MB2 params [0149.932] I> MB2-params @ 0x40060000 [0149.936] I> Task: Crypto init [0149.938] I> Task: Perform MB1 KAT tests [0149.942] I> Task: NVRNG health check [0149.946] I> NVRNG: Health check success [0149.950] I> Task: Secure debug controls [0149.954] I> Task: strap war set [0149.957] I> Task: Program NV master stream id [0149.961] I> Task: Verify boot mode [0149.967] I> Task: Alias fuses [0149.970] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0149.977] I> Task: Print SKU type [0149.980] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0149.985] I> FUSE_OPT_GPC_DISABLE = 0x00000001 [0149.989] I> FUSE_OPT_TPC_DISABLE = 0x0000000f [0149.994] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0149.998] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0150.002] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0150.007] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0150.011] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0150.015] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0150.020] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0150.024] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0150.028] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0150.032] I> FUSE_SKU_INFO_0 = 0xd3 [0150.035] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0150.040] I> FUSE_PACKAGE_INFO_0 = 0x2 [0150.043] I> SKU: Prod [0150.045] I> Task: Boost clocks [0150.048] I> Initializing NAFLL for BPMP_CPU_NIC. [0150.053] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0150.059] I> BPMP NAFLL lock success. [0150.062] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0150.067] I> Initializing PLLC2 for AXI_CBB. [0150.071] I> AXI_CBB : src = 35, divisor = 0 [0150.075] I> Task: Voltage monitor [0150.079] I> VMON: Vmon re-calibration and fine tuning done [0150.084] I> Task: UPHY init [0150.087] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0150.092] I> Task: Boot device init [0150.096] I> Boot_device: RCM [0150.099] I> USB configuration success [0150.102] I> Task: TSC init [0150.105] I> Task: Enable WDT 5th expiry [0150.109] I> Task: I2C register [0150.112] I> Task: Set I2C bus freq [0150.115] I> Task: Reset FSI [0150.118] I> Task: Enable clock-mon [0150.122] I> FMON: Fmon re-programming done [0150.126] I> Task: Mapper init [0150.129] I> Task: MB1 fixed firewalls [0150.136] W> Firewall readback mismatch [0150.141] I> Task: Load MB2/Applet/FSKP [0150.144] I> Loading MB2 Applet [0150.147] I> Slot: 0 [0150.149] I> Binary[21] block-352321536 (partition size: 0x50000) [0150.155] I> Binary name: MB2-Applet [0150.159] I> Size of crypto header is 8192 [0150.163] I> Size of crypto header is 8192 [0150.167] I> BCH of MB2-Applet read from storage [0150.171] I> BCH address is : 0x4004e000 [0150.175] I> MB2-Applet header integrity check is success [0150.180] I> Binary magic in BCH component 0 is MB2A [0150.185] I> component binary type is 21 [0150.189] I> Size of crypto header is 8192 [0150.201] I> MB2-Applet binary is read from storage [0150.206] I> MB2-Applet binary integrity check is success [0150.212] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x42440) [0150.218] I> Task: Prepare MB2 params [0150.222] I> Task: Misc NV security settings [0150.226] I> NVDEC sticky bits programming done [0150.231] I> Successfully powergated NVDEC [0150.235] I> Task: Disable/Reload WDT [0150.238] I> Task: Program misc carveouts [0150.242] I> Task: Disable SCPM/POD reset [0150.246] I> SLCG Global override status := 0x0 [0150.250] I> MB1: MSS reconfig completed [0150.254] W> Firewall readback mismatch [0150.258] W> Firewall readback mismatch [0150.262] W> Firewall readback mismatch [0150.265] W> Firewall readback mismatch [0150.269] W> Firewall readback mismatch [0150.273] W> Firewall readback mismatch [0150.276] W> Firewall readback mismatch [0150.280] W> Firewall readback mismatch [0150.284] W> Firewall readback mismatch [0150.287] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-b648c465) I> t234-A01-0-Silicon (0x12347) Prod I> Emulation: I> Entry timestamp: 0x00000000 I> Task: Pinmux init I> Task: Crypto init I> Task: Boot device init I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: SDMMC_BOOT instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 0-3 I> Secondary storage device: SDMMC_USER instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 1-3 I> Secondary storage device: QSPI_FLASH instance: 0 I> Task: I2C register I> Task: Register exit handlers I> Task: Enter 3p server I> USB configuration success I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Populate chip info I> RAM_CODE 0x4000001 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> strt_pg_num(0) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 1 copy of BRBCT @ 0 I> strt_pg_num(512) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 2 copy of BRBCT @ 262144 I> strt_pg_num(1024) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 3 copy of BRBCT @ 524288 I> strt_pg_num(1536) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 4 copy of BRBCT @ 786432 E> NV3P_SERVER: Failed to get address for br bct from nv3p helper. I> Rebooting : reboot-recovery �� [0792.048] I> MB1 (version: 1.4.0.2-t234-54845784-08a4de08) [0792.053] I> t234-A01-0-Silicon (0x12347) Prod [0792.058] I> Boot-mode : BPMP Diagnostic [0792.061] I> Entry timestamp: 0x00000000 [0792.065] I> last_boot_error: 0x0 [0792.068] I> BR-BCT: preprod_dev_sign: 0 [0792.072] I> rst_source: 0xb, rst_level: 0x1 [0792.076] I> Task: Initialize MB2 params [0792.080] I> MB2-params @ 0x40060000 [0792.084] I> Task: Crypto init [0792.087] I> Task: Perform MB1 KAT tests [0792.091] I> Task: NVRNG health check [0792.094] I> NVRNG: Health check success [0792.098] I> Task: Secure debug controls [0792.102] I> Task: strap war set [0792.105] I> Task: Program NV master stream id [0792.109] I> Task: Verify boot mode [0792.115] I> Task: Alias fuses [0792.118] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0792.125] I> Task: Print SKU type [0792.129] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0792.134] I> FUSE_OPT_GPC_DISABLE = 0x00000001 [0792.138] I> FUSE_OPT_TPC_DISABLE = 0x0000000f [0792.142] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0792.147] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0792.151] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0792.155] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0792.160] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0792.164] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0792.168] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0792.173] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0792.177] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0792.181] I> FUSE_SKU_INFO_0 = 0xd3 [0792.184] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0792.188] I> FUSE_PACKAGE_INFO_0 = 0x2 [0792.192] I> SKU: Prod [0792.194] I> Task: Boost clocks [0792.197] I> Initializing NAFLL for BPMP_CPU_NIC. [0792.202] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0792.208] I> BPMP NAFLL lock success. [0792.211] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0792.216] I> Initializing PLLC2 for AXI_CBB. [0792.220] I> AXI_CBB : src = 35, divisor = 0 [0792.224] I> Task: Voltage monitor [0792.227] I> VMON: Vmon re-calibration and fine tuning done [0792.233] I> Task: UPHY init [0792.236] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0792.241] I> Task: Boot device init [0792.244] I> Boot_device: RCM [0792.247] I> USB configuration success [0792.251] I> Task: TSC init [0792.254] I> Task: Enable WDT 5th expiry [0792.258] I> Task: I2C register [0792.261] I> Task: Set I2C bus freq [0792.264] I> Task: Reset FSI [0792.267] I> Task: Enable clock-mon [0792.271] I> FMON: Fmon re-programming done [0792.275] I> Task: Mapper init [0792.278] I> Task: MB1 fixed firewalls [0792.284] W> Firewall readback mismatch [0792.289] I> Task: Load MB2/Applet/FSKP [0792.293] I> Loading MB2 Applet [0792.296] I> Slot: 0 [0792.298] I> Binary[21] block-352321536 (partition size: 0x50000) [0792.304] I> Binary name: MB2-Applet [0792.307] I> Size of crypto header is 8192 [0792.311] I> Size of crypto header is 8192 [0792.315] I> BCH of MB2-Applet read from storage [0792.320] I> BCH address is : 0x4004e000 [0792.324] I> MB2-Applet header integrity check is success [0792.329] I> Binary magic in BCH component 0 is MB2A [0792.334] I> component binary type is 21 [0792.338] I> Size of crypto header is 8192 [0792.349] I> MB2-Applet binary is read from storage [0792.354] I> MB2-Applet binary integrity check is success [0792.359] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x42440) [0792.366] I> Task: Prepare MB2 params [0792.370] I> Task: Misc NV security settings [0792.374] I> NVDEC sticky bits programming done [0792.378] I> Successfully powergated NVDEC [0792.382] I> Task: Disable/Reload WDT [0792.386] I> Task: Program misc carveouts [0792.390] I> Task: Disable SCPM/POD reset [0792.394] I> SLCG Global override status := 0x0 [0792.398] I> MB1: MSS reconfig completed [0792.402] W> Firewall readback mismatch [0792.406] W> Firewall readback mismatch [0792.409] W> Firewall readback mismatch [0792.413] W> Firewall readback mismatch [0792.417] W> Firewall readback mismatch [0792.420] W> Firewall readback mismatch [0792.424] W> Firewall readback mismatch [0792.428] W> Firewall readback mismatch [0792.431] W> Firewall readback mismatch [0792.435] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-b648c465) I> t234-A01-0-Silicon (0x12347) Prod I> Emulation: I> Entry timestamp: 0x00000000 I> Task: Pinmux init I> Task: Crypto init I> Task: Boot device init I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: SDMMC_BOOT instance: 3 E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 0-3 I> Secondary storage device: SDMMC_USER instance: 3 E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 1-3 I> Secondary storage device: QSPI_FLASH instance: 0 I> Task: I2C register I> Task: Register exit handlers I> Task: Enter 3p server I> USB configuration success I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Populate chip info I> RAM_CODE 0x4000001 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> strt_pg_num(0) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 1 copy of BRBCT @ 0 I> strt_pg_num(512) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 2 copy of BRBCT @ 262144 I> strt_pg_num(1024) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 3 copy of BRBCT @ 524288 I> strt_pg_num(1536) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 4 copy of BRBCT @ 786432 E> NV3P_SERVER: Failed to get address for br bct from nv3p helper. I> Rebooting : reboot-recovery �� [0050.370] I> MB1 (version: 1.4.0.2-t234-54845784-08a4de08) [0050.375] I> t234-A01-0-Silicon (0x12347) Prod [0050.379] I> Boot-mode : BPMP Diagnostic [0050.383] I> Entry timestamp: 0x00000000 [0050.387] I> last_boot_error: 0x0 [0050.390] I> BR-BCT: preprod_dev_sign: 0 [0050.394] I> rst_source: 0xb, rst_level: 0x1 [0050.398] I> Task: Initialize MB2 params [0050.402] I> MB2-params @ 0x40060000 [0050.405] I> Task: Crypto init [0050.408] I> Task: Perform MB1 KAT tests [0050.412] I> Task: NVRNG health check [0050.416] I> NVRNG: Health check success [0050.420] I> Task: Secure debug controls [0050.423] I> Task: strap war set [0050.426] I> Task: Program NV master stream id [0050.431] I> Task: Verify boot mode [0050.436] I> Task: Alias fuses [0050.440] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0050.447] I> Task: Print SKU type [0050.450] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0050.456] I> FUSE_OPT_GPC_DISABLE = 0x00000001 [0050.460] I> FUSE_OPT_TPC_DISABLE = 0x0000000f [0050.464] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0050.469] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0050.473] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0050.477] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0050.482] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0050.486] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0050.490] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0050.494] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0050.499] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0050.503] I> FUSE_SKU_INFO_0 = 0xd3 [0050.506] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0050.510] I> FUSE_PACKAGE_INFO_0 = 0x2 [0050.514] I> SKU: Prod [0050.516] I> Task: Boost clocks [0050.519] I> Initializing NAFLL for BPMP_CPU_NIC. [0050.524] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0050.530] I> BPMP NAFLL lock success. [0050.533] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0050.538] I> Initializing PLLC2 for AXI_CBB. [0050.542] I> AXI_CBB : src = 35, divisor = 0 [0050.546] I> Task: Voltage monitor [0050.549] I> VMON: Vmon re-calibration and fine tuning done [0050.555] I> Task: UPHY init [0050.558] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0050.564] I> Task: Boot device init [0050.567] I> Boot_device: RCM [0050.570] I> USB configuration success [0050.574] I> Task: TSC init [0050.577] I> Task: Enable WDT 5th expiry [0050.580] I> Task: I2C register [0050.583] I> Task: Set I2C bus freq [0050.587] I> Task: Reset FSI [0050.589] I> Task: Enable clock-mon [0050.593] I> FMON: Fmon re-programming done [0050.597] I> Task: Mapper init [0050.600] I> Task: MB1 fixed firewalls [0050.607] W> Firewall readback mismatch [0050.612] I> Task: Load MB2/Applet/FSKP [0050.615] I> Loading MB2 Applet [0050.619] I> Slot: 0 [0050.621] I> Binary[21] block-352321536 (partition size: 0x50000) [0050.627] I> Binary name: MB2-Applet [0050.630] I> Size of crypto header is 8192 [0050.634] I> Size of crypto header is 8192 [0050.638] I> BCH of MB2-Applet read from storage [0050.643] I> BCH address is : 0x4004e000 [0050.646] I> MB2-Applet header integrity check is success [0050.652] I> Binary magic in BCH component 0 is MB2A [0050.657] I> component binary type is 21 [0050.660] I> Size of crypto header is 8192 [0050.671] I> MB2-Applet binary is read from storage [0050.676] I> MB2-Applet binary integrity check is success [0050.682] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x42440) [0050.688] I> Task: Prepare MB2 params [0050.692] I> Task: Misc NV security settings [0050.696] I> NVDEC sticky bits programming done [0050.701] I> Successfully powergated NVDEC [0050.705] I> Task: Disable/Reload WDT [0050.708] I> Task: Program misc carveouts [0050.712] I> Task: Disable SCPM/POD reset [0050.716] I> SLCG Global override status := 0x0 [0050.721] I> MB1: MSS reconfig completed [0050.724] W> Firewall readback mismatch [0050.728] W> Firewall readback mismatch [0050.732] W> Firewall readback mismatch [0050.735] W> Firewall readback mismatch [0050.739] W> Firewall readback mismatch [0050.743] W> Firewall readback mismatch [0050.746] W> Firewall readback mismatch [0050.750] W> Firewall readback mismatch [0050.754] W> Firewall readback mismatch [0050.758] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-b648c465) I> t234-A01-0-Silicon (0x12347) Prod I> Emulation: I> Entry timestamp: 0x00000000 I> Task: Pinmux init I> Task: Crypto init I> Task: Boot device init I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: SDMMC_BOOT instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 0-3 I> Secondary storage device: SDMMC_USER instance: 3 E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 1-3 I> Secondary storage device: QSPI_FLASH instance: 0 I> Task: I2C register I> Task: Register exit handlers I> Task: Enter 3p server I> USB configuration success I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Populate chip info I> RAM_CODE 0x4000001 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> strt_pg_num(0) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 1 copy of BRBCT @ 0 I> strt_pg_num(512) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 2 copy of BRBCT @ 262144 I> strt_pg_num(1024) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 3 copy of BRBCT @ 524288 I> strt_pg_num(1536) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 4 copy of BRBCT @ 786432 E> NV3P_SERVER: Failed to get address for br bct from nv3p helper. I> Rebooting : reboot-recovery CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0 �� [1454.017] I> MB1 (version: 1.4.0.2-t234-54845784-08a4de08) [1454.022] I> t234-A01-0-Silicon (0x12347) Prod [1454.026] I> Boot-mode : BPMP Diagnostic [1454.030] I> Entry timestamp: 0x00000000 [1454.034] I> last_boot_error: 0x0 [1454.037] I> BR-BCT: preprod_dev_sign: 0 [1454.041] I> rst_source: 0xb, rst_level: 0x1 [1454.045] I> Task: Initialize MB2 params [1454.049] I> MB2-params @ 0x40060000 [1454.053] I> Task: Crypto init [1454.056] I> Task: Perform MB1 KAT tests [1454.060] I> Task: NVRNG health check [1454.063] I> NVRNG: Health check success [1454.067] I> Task: Secure debug controls [1454.071] I> Task: strap war set [1454.074] I> Task: Program NV master stream id [1454.078] I> Task: Verify boot mode [1454.084] I> Task: Alias fuses [1454.087] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [1454.094] I> Task: Print SKU type [1454.097] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [1454.103] I> FUSE_OPT_GPC_DISABLE = 0x00000001 [1454.107] I> FUSE_OPT_TPC_DISABLE = 0x0000000f [1454.111] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [1454.115] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [1454.120] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [1454.124] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [1454.129] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [1454.133] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [1454.137] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [1454.141] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [1454.145] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [1454.150] I> FUSE_SKU_INFO_0 = 0xd3 [1454.153] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [1454.157] I> FUSE_PACKAGE_INFO_0 = 0x2 [1454.161] I> SKU: Prod [1454.163] I> Task: Boost clocks [1454.166] I> Initializing NAFLL for BPMP_CPU_NIC. [1454.171] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [1454.176] I> BPMP NAFLL lock success. [1454.180] I> BPMP_CPU_NIC : src = 42, divisor = 0 [1454.184] I> Initializing PLLC2 for AXI_CBB. [1454.189] I> AXI_CBB : src = 35, divisor = 0 [1454.193] I> Task: Voltage monitor [1454.196] I> VMON: Vmon re-calibration and fine tuning done [1454.202] I> Task: UPHY init [1454.205] W> UPHY: UPHY lane info table is empty in MB1 BCT. [1454.211] I> Task: Boot device init [1454.214] I> Boot_device: RCM [1454.217] I> USB configuration success [1454.221] I> Task: TSC init [1454.223] I> Task: Enable WDT 5th expiry [1454.227] I> Task: I2C register [1454.230] I> Task: Set I2C bus freq [1454.234] I> Task: Reset FSI [1454.236] I> Task: Enable clock-mon [1454.240] I> FMON: Fmon re-programming done [1454.244] I> Task: Mapper init [1454.247] I> Task: MB1 fixed firewalls [1454.254] W> Firewall readback mismatch [1454.259] I> Task: Load MB2/Applet/FSKP [1454.262] I> Loading MB2 Applet [1454.265] I> Slot: 0 [1454.267] I> Binary[21] block-352321536 (partition size: 0x50000) [1454.273] I> Binary name: MB2-Applet [1454.277] I> Size of crypto header is 8192 [1454.281] I> Size of crypto header is 8192 [1454.285] I> BCH of MB2-Applet read from storage [1454.289] I> BCH address is : 0x4004e000 [1454.293] I> MB2-Applet header integrity check is success [1454.299] I> Binary magic in BCH component 0 is MB2A [1454.303] I> component binary type is 21 [1454.307] I> Size of crypto header is 8192 [1454.319] I> MB2-Applet binary is read from storage [1454.325] I> MB2-Applet binary integrity check is success [1454.330] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x42440) [1454.337] I> Task: Prepare MB2 params [1454.341] I> Task: Misc NV security settings [1454.345] I> NVDEC sticky bits programming done [1454.349] I> Successfully powergated NVDEC [1454.353] I> Task: Disable/Reload WDT [1454.357] I> Task: Program misc carveouts [1454.361] I> Task: Disable SCPM/POD reset [1454.365] I> SLCG Global override status := 0x0 [1454.369] I> MB1: MSS reconfig completed [1454.373] W> Firewall readback mismatch [1454.377] W> Firewall readback mismatch [1454.380] W> Firewall readback mismatch [1454.384] W> Firewall readback mismatch [1454.388] W> Firewall readback mismatch [1454.391] W> Firewall readback mismatch [1454.395] W> Firewall readback mismatch [1454.399] W> Firewall readback mismatch [1454.402] W> Firewall readback mismatch [1454.406] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-b648c465) I> t234-A01-0-Silicon (0x12347) Prod I> Emulation: I> Entry timestamp: 0x00000000 I> Task: Pinmux init I> Task: Crypto init I> Task: Boot device init I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: SDMMC_BOOT instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 0-3 I> Secondary storage device: SDMMC_USER instance: 3 E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 1-3 I> Secondary storage device: QSPI_FLASH instance: 0 I> Task: I2C register I> Task: Register exit handlers I> Task: Enter 3p server I> USB configuration success I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Reading fuses I> Read fuse successfully I> Populate chip info I> RAM_CODE 0x4000001 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> strt_pg_num(0) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 1 copy of BRBCT @ 0 I> strt_pg_num(512) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 2 copy of BRBCT @ 262144 I> strt_pg_num(1024) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 3 copy of BRBCT @ 524288 I> strt_pg_num(1536) num_of_pgs(16) read_buf(0x40071738) E> LOADER: Invalid value Header magic. E> Validation failed for 4 copy of BRBCT @ 786432 E> NV3P_SERVER: Failed to get address for br bct from nv3p helper. I> Rebooting : reboot-recovery �� [0102.087] I> MB1 (version: 1.4.0.2-t234-54845784-08a4de08) [0102.092] I> t234-A01-0-Silicon (0x12347) Prod [0102.096] I> Boot-mode : Coldboot [0102.099] I> Entry timestamp: 0x00000000 [0102.103] I> last_boot_error: 0x0 [0102.106] I> BR-BCT: preprod_dev_sign: 0 [0102.110] I> rst_source: 0xb, rst_level: 0x1 [0102.114] I> Task: SE error check [0102.117] I> Task: Bootchain select WAR set [0102.121] I> Task: Enable SLCG [0102.124] I> Task: CRC check [0102.127] I> Task: Initialize MB2 params [0102.132] I> MB2-params @ 0x40060000 [0102.135] I> Task: Crypto init [0102.138] I> Task: Perform MB1 KAT tests [0102.142] I> Task: NVRNG health check [0102.145] I> NVRNG: Health check success [0102.149] I> Task: MSS Bandwidth limiter settings for iGPU clients [0102.155] I> Task: Enabling and initialization of Bandwidth limiter [0102.161] I> No request to configure MBWT settings for any PC! [0102.167] I> Task: Secure debug controls [0102.171] I> Task: strap war set [0102.174] I> Task: Initialize SOC Therm [0102.178] I> Task: Program NV master stream id [0102.182] I> Task: Verify boot mode [0102.188] I> Task: Alias fuses [0102.191] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0102.198] I> Task: Print SKU type [0102.202] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0102.207] I> FUSE_OPT_GPC_DISABLE = 0x00000001 [0102.211] I> FUSE_OPT_TPC_DISABLE = 0x0000000f [0102.215] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0102.220] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0102.224] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0102.228] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0102.233] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0102.237] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0102.241] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0102.246] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0102.250] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0102.254] I> FUSE_SKU_INFO_0 = 0xd3 [0102.257] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0102.261] I> FUSE_PACKAGE_INFO_0 = 0x2 [0102.265] I> SKU: Prod [0102.267] I> Task: Boost clocks [0102.270] I> Initializing NAFLL for BPMP_CPU_NIC. [0102.275] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0102.281] I> BPMP NAFLL lock success. [0102.284] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0102.289] I> Initializing PLLC2 for AXI_CBB. [0102.293] I> AXI_CBB : src = 35, divisor = 0 [0102.297] I> Task: Voltage monitor [0102.300] I> VMON: Vmon re-calibration and fine tuning done [0102.306] I> Task: UPHY init [0102.311] I> HSIO UPHY init done [0102.314] W> Skipping GBE UPHY config [0102.317] I> Task: Boot device init [0102.321] I> Boot_device: RCM [0102.324] I> USB configuration success [0102.501] I> Task: TSC init [0102.504] I> Task: Load membct [0102.507] I> RAM_CODE 0x4000001 [0102.510] I> Loading MEMBCT [0102.513] I> Slot: 0 [0102.515] I> Binary[0] block-0 (partition size: 0x40000) [0102.520] I> Binary name: MEM-BCT-0 [0102.523] I> Size of crypto header is 8192 [0102.527] I> Size of crypto header is 8192 [0102.559] I> BCH of MEM-BCT-0 read from storage [0102.564] I> BCH address is : 0x40050000 [0102.567] I> MEM-BCT-0 header integrity check is success [0102.573] I> Binary magic in BCH component 0 is MEM0 [0102.577] I> component binary type is 0 [0102.583] I> MEM-BCT-0 binary is read from storage [0102.588] I> MEM-BCT-0 binary integrity check is success [0102.593] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0102.599] I> RAM_CODE 0x4000001 [0102.605] I> RAM_CODE 0x4000001 [0102.608] I> Task: Load Page retirement list [0102.613] I> Task: SDRAM params override [0102.616] I> Task: Save mem-bct info [0102.620] I> Task: Carveout allocate [0102.623] I> Update CCPLEX IST carveout from MB1-BCT [0102.628] I> ECC region[0]: Start:0x0, End:0x0 [0102.632] I> ECC region[1]: Start:0x0, End:0x0 [0102.637] I> ECC region[2]: Start:0x0, End:0x0 [0102.641] I> ECC region[3]: Start:0x0, End:0x0 [0102.645] I> ECC region[4]: Start:0x0, End:0x0 [0102.649] I> Non-ECC region[0]: Start:0x80000000, End:0x480000000 [0102.655] I> Non-ECC region[1]: Start:0x0, End:0x0 [0102.660] I> Non-ECC region[2]: Start:0x0, End:0x0 [0102.665] I> Non-ECC region[3]: Start:0x0, End:0x0 [0102.669] I> Non-ECC region[4]: Start:0x0, End:0x0 [0102.680] I> allocated(CO:43) base:0xbe000000 size:0x4000000 align: 0x200000 [0102.687] I> allocated(CO:39) base:0x47de00000 size:0x2200000 align: 0x10000 [0102.694] I> allocated(CO:20) base:0x47a000000 size:0x2000000 align: 0x2000000 [0102.701] I> allocated(CO:24) base:0x478000000 size:0x2000000 align: 0x2000000 [0102.708] I> allocated(CO:28) base:0x476000000 size:0x2000000 align: 0x2000000 [0102.715] I> allocated(CO:22) base:0x47c000000 size:0x1000000 align: 0x1000000 [0102.722] I> allocated(CO:35) base:0x475000000 size:0x1000000 align: 0x100000 [0102.729] I> allocated(CO:02) base:0x47d000000 size:0x800000 align: 0x800000 [0102.736] I> allocated(CO:03) base:0x474800000 size:0x800000 align: 0x800000 [0102.743] I> allocated(CO:06) base:0x474000000 size:0x800000 align: 0x800000 [0102.750] I> allocated(CO:56) base:0x473800000 size:0x800000 align: 0x200000 [0102.757] I> allocated(CO:07) base:0x47d800000 size:0x400000 align: 0x400000 [0102.764] I> allocated(CO:33) base:0x473400000 size:0x400000 align: 0x200000 [0102.771] I> allocated(CO:19) base:0x473180000 size:0x280000 align: 0x10000 [0102.778] I> allocated(CO:23) base:0x47dc00000 size:0x200000 align: 0x200000 [0102.785] I> allocated(CO:01) base:0x473000000 size:0x100000 align: 0x100000 [0102.792] I> allocated(CO:05) base:0x472f00000 size:0x100000 align: 0x100000 [0102.799] I> allocated(CO:08) base:0x472e00000 size:0x100000 align: 0x100000 [0102.806] I> allocated(CO:09) base:0x472d00000 size:0x100000 align: 0x100000 [0102.813] I> allocated(CO:12) base:0x472c00000 size:0x100000 align: 0x100000 [0102.820] I> allocated(CO:15) base:0x472b00000 size:0x100000 align: 0x100000 [0102.827] I> allocated(CO:17) base:0x472a00000 size:0x100000 align: 0x100000 [0102.833] I> allocated(CO:27) base:0x472900000 size:0x100000 align: 0x100000 [0102.840] I> allocated(CO:42) base:0x472800000 size:0x100000 align: 0x100000 [0102.847] I> allocated(CO:54) base:0x473100000 size:0x80000 align: 0x80000 [0102.854] I> allocated(CO:34) base:0x4727f0000 size:0x10000 align: 0x10000 [0102.861] I> allocated(CO:72) base:0x4725f0000 size:0x200000 align: 0x10000 [0102.868] I> allocated(CO:46) base:0x440000000 size:0x20000000 align: 0x20000000 [0102.875] I> allocated(CO:47) base:0x472000000 size:0x400000 align: 0x200000 [0102.882] I> allocated(CO:50) base:0x471e00000 size:0x200000 align: 0x100000 [0102.889] I> allocated(CO:48) base:0x4725d0000 size:0x20000 align: 0x10000 [0102.896] I> allocated(CO:69) base:0x4725b0000 size:0x20000 align: 0x10000 [0102.902] I> allocated(CO:49) base:0x4725a0000 size:0x10000 align: 0x10000 [0102.909] I> NSDRAM base: 0x80000000, end: 0x4725f0000, size: 0x3f25f0000 [0102.916] I> Task: Thermal check [0102.919] I> Using min_chip_limit as min_tmon_limit [0102.924] I> Using max_chip_limit as max_tmon_limit [0102.928] I> BCT max_tmon_limit = 105 [0102.932] I> BCT min_tmon_limit = -28 [0102.935] I> BCT max_tmon_limit = 105 [0102.939] I> BCT min_tmon_limit = -28 [0102.942] I> SKU specific max_chip_limit = 105 [0102.947] I> SKU specific min_chip_limit = -28 [0102.951] I> BCT max_chip_limit = 105 [0102.955] I> BCT min_chip_limit = -28 [0102.958] I> enable_soctherm_polling = 0 [0102.962] I> max temp read = 37 [0102.965] I> min temp read = 36 [0102.968] I> Enabling thermtrip [0102.971] I> Task: Update FSI SCR with thermal fuse data [0102.976] I> Task: Enable WDT 5th expiry [0102.980] I> Task: I2C register [0102.983] I> Task: Set I2C bus freq [0102.986] I> Task: Reset FSI [0102.989] I> Task: Pinmux init [0102.992] I> skipped mmio_addr = 0x9240008 [0102.996] I> skipped mmio_addr = 0x9240000 [0103.000] I> skipped mmio_addr = 0x9240010 [0103.004] I> skipped mmio_addr = 0x9240018 [0103.008] I> skipped mmio_addr = 0x9240020 [0103.012] I> skipped mmio_addr = 0x9240030 [0103.016] I> skipped mmio_addr = 0x9240028 [0103.020] I> skipped mmio_addr = 0x9240038 [0103.023] I> skipped mmio_addr = 0x9240040 [0103.027] I> skipped mmio_addr = 0x9240048 [0103.031] I> skipped mmio_addr = 0x9241000 [0103.035] I> skipped mmio_addr = 0x9241008 [0103.039] I> skipped mmio_addr = 0x9241010 [0103.043] I> skipped mmio_addr = 0x9241018 [0103.047] I> skipped mmio_addr = 0x9241020 [0103.051] I> skipped mmio_addr = 0x9241028 [0103.055] I> skipped mmio_addr = 0x9241030 [0103.059] I> skipped mmio_addr = 0x9241038 [0103.063] I> skipped mmio_addr = 0x9241040 [0103.067] I> skipped mmio_addr = 0x9242000 [0103.071] I> skipped mmio_addr = 0x9242008 [0103.075] I> Task: Prod config init [0103.078] I> Task: Pad voltage init [0103.081] I> Task: Prod init [0103.084] I> Task: Program rst req config reg [0103.088] I> Task: Common rail init [0103.092] I> DONE: Thermal config [0103.096] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0103.104] I> DONE: SOC rail config [0103.108] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0103.115] I> DONE: MEMIO rail config [0103.119] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT. [0103.125] I> DONE: GPU rail info [0103.128] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT. [0103.135] I> DONE: CV rail info [0103.137] I> Task: Mem clock src [0103.141] I> Task: Misc. board config [0103.145] I> PMIC_CONFIG: Platform config not found in MB1 BCT. [0103.150] I> Task: SDRAM init [0103.153] I> MemoryType: 4 MemBctRevision: 1 [0103.160] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0103.167] I> MSS CAR: Init PLLM [0103.170] I> MSS CAR: Init PLLHUB [0103.175] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0103.187] I> SDRAM initialized! [0103.190] I> SDRAM Size in Total 0x400000000 [0103.194] I> Task: Dram Ecc scrub [0103.197] I> Task: DRAM alias check [0103.207] I> Task: Program NSDRAM carveout [0103.211] I> NSDRAM carveout encryption is enabled [0103.215] I> Program NSDRAM carveout [0103.219] I> Task: Register checker [0103.222] I> Task: Enable clock-mon [0103.226] I> FMON: Fmon re-programming done [0103.230] I> Task: Mapper init [0103.233] I> Task: SC7 Context Init [0103.237] W> SC7_CONTEXT_SAVE: SC7 ctx save is not supported. [0103.242] I> Task: CCPLEX IST init [0103.245] I> Task: CPU WP0 [0103.248] I> Loading MCE [0103.250] I> Slot: 0 [0103.252] I> Binary[8] block-134217728 (partition size: 0x80000) [0103.258] I> Binary name: MCE [0103.261] I> Size of crypto header is 8192 [0103.265] I> Size of crypto header is 8192 [0106.562] I> BCH of MCE read from storage [0106.566] I> BCH address is : 0x4003e000 [0106.570] I> MCE header integrity check is success [0106.575] I> Binary magic in BCH component 0 is MTSM [0106.580] I> component binary type is 8 [0106.583] I> Size of crypto header is 8192 [0106.590] I> MCE binary is read from storage [0106.595] I> MCE binary integrity check is success [0106.599] I> Binary MCE loaded successfully at 0x40000000 (0x2baf0) [0106.606] I> Size of crypto header is 8192 [0106.610] I> Sending WP0 mailbox command to PSC [0106.619] I> Task: XUSB Powergate [0106.622] I> Skipping powergate XUSB. [0106.625] I> Task: MB1 fixed firewalls [0106.632] W> Firewall readback mismatch [0106.637] I> Task: Load bpmp-fw [0106.640] I> Slot: 0 [0106.642] I> Binary[15] block-251658240 (partition size: 0x180000) [0106.648] I> Binary name: BPMP_FW [0106.651] I> Size of crypto header is 8192 [0106.655] I> Size of crypto header is 8192 [0106.659] I> BCH of BPMP_FW read from storage [0106.663] I> BCH address is : 0x807fe000 [0106.667] I> BPMP_FW header integrity check is success [0106.672] I> Binary magic in BCH component 0 is BPMF [0106.677] I> component binary type is 15 [0106.681] I> Size of crypto header is 8192 [0106.702] I> BPMP_FW binary is read from storage [0106.708] I> BPMP_FW binary integrity check is success [0106.713] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xf8bc0) [0106.720] I> Slot: 0 [0106.722] I> Binary[16] block-268435456 (partition size: 0x400000) [0106.728] I> Binary name: BPMP_FW_DTB [0106.731] I> Size of crypto header is 8192 [0106.735] I> Size of crypto header is 8192 [0106.739] I> BCH of BPMP_FW_DTB read from storage [0106.744] I> BCH address is : 0x807fc000 [0106.748] I> BPMP_FW_DTB header integrity check is success [0106.753] I> Binary magic in BCH component 0 is BPMD [0106.758] I> component binary type is 16 [0106.762] I> Size of crypto header is 8192 [0106.772] I> BPMP_FW_DTB binary is read from storage [0106.777] I> BPMP_FW_DTB binary integrity check is success [0106.783] I> Binary BPMP_FW_DTB loaded successfully at 0x807a06f0 (0x5b900) [0106.790] I> Task: BPMP fw ast config [0106.793] I> Task: Load psc-fw [0106.796] I> Slot: 0 [0106.798] I> Binary[17] block-285212672 (partition size: 0xc0000) [0106.804] I> Binary name: PSC_FW [0106.807] I> Size of crypto header is 8192 [0106.811] I> Size of crypto header is 8192 [0106.815] I> BCH of PSC_FW read from storage [0106.819] I> BCH address is : 0x80ffe000 [0106.823] I> PSC_FW header integrity check is success [0106.828] I> Binary magic in BCH component 0 is PFWP [0106.833] I> component binary type is 17 [0106.836] I> Size of crypto header is 8192 [0106.846] I> PSC_FW binary is read from storage [0106.850] I> PSC_FW binary integrity check is success [0106.855] I> Binary PSC_FW loaded successfully at 0x80fb4210 (0x49df0) [0106.862] I> Task: Load nvdec-fw [0106.865] I> Slot: 0 [0106.867] I> Binary[7] block-117440512 (partition size: 0x100000) [0106.873] I> Binary name: NVDEC [0106.876] I> Size of crypto header is 8192 [0106.880] I> Size of crypto header is 8192 [0106.884] I> BCH of NVDEC read from storage [0106.888] I> BCH address is : 0x800fe000 [0106.892] I> NVDEC header integrity check is success [0106.897] I> Binary magic in BCH component 0 is NDEC [0106.901] I> component binary type is 7 [0106.905] I> Size of crypto header is 8192 [0106.914] I> NVDEC binary is read from storage [0106.919] I> NVDEC binary integrity check is success [0106.923] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0106.932] I> Task: Load tsec-fw [0106.935] I> TSEC-FW load support not enabled [0106.939] I> Task: GPIO interrupt map [0106.943] I> Task: SC7 context save [0106.947] W> SC7_CONTEXT_SAVE: SC7 ctx save is not supported. [0106.953] I> Task: Load MB2/Applet/FSKP [0106.957] I> Loading MB2 [0106.959] I> Slot: 0 [0106.961] I> Binary[6] block-100663296 (partition size: 0x80000) [0106.967] I> Binary name: MB2 [0106.970] I> Size of crypto header is 8192 [0106.974] I> Size of crypto header is 8192 [0106.978] I> BCH of MB2 read from storage [0106.982] I> BCH address is : 0x8007e000 [0106.985] I> MB2 header integrity check is success [0106.990] I> Binary magic in BCH component 0 is MB2B [0106.995] I> component binary type is 6 [0106.999] I> Size of crypto header is 8192 [0107.010] I> MB2 binary is read from storage [0107.015] I> MB2 binary integrity check is success [0107.019] I> Binary MB2 loaded successfully at 0x80000000 (0x696a0) [0107.026] I> Task: Map CCPLEX SHARED carveout [0107.030] I> Task: Prepare MB2 params [0107.034] I> Task: Dram ecc test [0107.037] I> Task: Misc NV security settings [0107.041] I> NVDEC sticky bits programming done [0107.045] I> Successfully powergated NVDEC [0107.049] I> Task: Disable/Reload WDT [0107.053] I> Task: Program misc carveouts [0107.057] I> Program IPC carveouts [0107.060] I> Task: Disable SCPM/POD reset [0107.064] I> SLCG Global override status := 0x0 [0107.068] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-af79ed0a) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : RCM BOOT I> Emulation: I> Entry timestamp: 0x06622709 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x473800000, size:0x800000] I> Task: SE error check I> Task: Crypto init I> Task: MB2 Params integrity check I> Task: Enable CCPLEX WDT 5th expiry I> Task: ARI update carveout TZDRAM I> Task: Configure OEM set LA/PTSA values I> Task: Check MC errors I> Task: Enable hot-plug capability I> Task: Set blob address I> Task: PSC mailbox init I> Task: Enable clock for external modules I> Task: Measured Boot init I> Task: fTPM silicon identity init I> fTPM is not enabled. I> Task: I2C register I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout I> Task: Program CBB PCIE AMAP regions I> Task: Pass DRAM ECC PRL Flag to FSI I> Task: Load and authenticate registered FWs I> Task: Load AUXP FWs I> Successfully register SPE FW load task with MB2 loader I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Successfully register PVA FW load task with MB2 loader I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x472e00000 I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x472a00000 I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x47a000000 I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x47d800000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x472f00000 I> pva-fw: Authentication Finalize Done I> Binary pva-fw loaded successfully at 0x473180000 I> Task: Check MC errors I> Task: Carveout setup I> Program remaining OEM carveouts I> Task: Enable FSI VMON I> Task: Restore XUSB sec I> Task: Enable FSI SE clock I> Task: Initialize SBSA UART CAR I> Task: Initialize CPUBL Params I> CPUBL-params @ 0x476000000 I> Task: Prepare eeprom data E> I2C: slave not found in slaves. E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. E> I2C_DEV: Failed to send register address 0x00000000. E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0. E> eeprom: Retry to read I2C slave device. E> I2C: slave not found in slaves. E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. E> I2C_DEV: Failed to send register address 0x00000000. E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0. E> eeprom: Failed to read I2C slave device C> Task 0x0 failed (err: 0x1f1e050d) E> Top caller module: I2C_DEV, error module: I2C, reason: 0x0d, aux_info: 0x05 I> Busy Spin