[11-18-33.758] [11-18-33.776] [0000.066] I> MB1 (version: 1.4.0.4-t234-54845784-e89ea9bc) [11-18-33.776][0000.071] I> t234-A01-1-Silicon (0x12347) Prod [11-18-33.777][0000.076] I> Boot-mode : Coldboot [11-18-33.777][0000.079] I> Entry timestamp: 0x00000000 [11-18-33.777][0000.083] I> last_boot_error: 0x0 [11-18-33.778][0000.086] I> BR-BCT: preprod_dev_sign: 0 [11-18-33.778][0000.090] I> rst_source: 0x0, rst_level: 0x0 [11-18-33.778][0000.094] I> Task: SE error check [11-18-33.790][0000.097] I> Task: Bootchain select WAR set [11-18-33.790][0000.101] I> Task: Enable SLCG [11-18-33.790][0000.104] I> Task: CRC check [11-18-33.790][0000.106] I> Task: Initialize MB2 params [11-18-33.802][0000.111] I> MB2-params @ 0x40060000 [11-18-33.803][0000.114] I> Task: Crypto init [11-18-33.803][0000.117] I> Task: Perform MB1 KAT tests [11-18-33.819][0000.121] I> Task: NVRNG health check [11-18-33.819][0000.125] I> NVRNG: Health check success [11-18-33.819][0000.128] I> Task: MSS Bandwidth limiter settings for iGPU clients [11-18-33.819][0000.134] I> Task: Enabling and initialization of Bandwidth limiter [11-18-33.826][0000.140] I> No request to configure MBWT settings for any PC! [11-18-33.826][0000.146] I> Task: Secure debug controls [11-18-33.827][0000.150] I> Task: strap war set [11-18-33.839][0000.153] I> Task: Initialize SOC Therm [11-18-33.840][0000.157] I> Task: Program NV master stream id [11-18-33.840][0000.161] I> Task: Verify boot mode [11-18-33.849][0000.167] I> Task: Alias fuses [11-18-33.884][0000.170] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [11-18-33.885][0000.177] I> Task: Print SKU type [11-18-33.885][0000.180] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [11-18-33.885][0000.185] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [11-18-33.885][0000.190] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [11-18-33.885][0000.194] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [11-18-33.886][0000.198] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [11-18-33.886][0000.202] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [11-18-33.886][0000.207] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [11-18-33.923][0000.211] I> FUSE_OPT_FSI_DISABLE = 0x00000000 [11-18-33.923][0000.216] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [11-18-33.923][0000.220] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [11-18-33.924][0000.224] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [11-18-33.924][0000.228] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [11-18-33.924][0000.232] I> FUSE_SKU_INFO_0 = 0xd0 [11-18-33.924][0000.236] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [11-18-33.924][0000.240] I> FUSE_PACKAGE_INFO_0 = 0x2 [11-18-33.925][0000.243] I> SKU: Prod [11-18-33.927][0000.245] I> Task: Boost clocks [11-18-33.928][0000.248] I> Initializing NAFLL for BPMP_CPU_NIC. [11-18-33.941][0000.254] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [11-18-33.941][0000.259] I> BPMP NAFLL lock success. [11-18-33.948][0000.262] I> BPMP_CPU_NIC : src = 42, divisor = 0 [11-18-33.949][0000.267] I> Initializing PLLC2 for AXI_CBB. [11-18-33.949][0000.271] I> AXI_CBB : src = 35, divisor = 0 [11-18-33.969][0000.275] I> Task: Voltage monitor [11-18-33.969][0000.279] I> VMON: Vmon re-calibration and fine tuning done [11-18-33.970][0000.284] I> Task: UPHY init [11-18-33.973][0000.289] I> HSIO UPHY init done [11-18-33.973][0000.292] W> Skipping GBE UPHY config [11-18-33.974][0000.295] I> Task: Boot device init [11-18-33.988][0000.299] I> Boot_device: QSPI_FLASH instance: 0 [11-18-33.988][0000.303] I> Qspi clock source : pllc_out0 [11-18-33.988][0000.308] I> QSPI Flash: Macronix 64MB [11-18-33.994][0000.311] I> QSPI-0l initialized successfully [11-18-33.994][0000.315] I> Task: TSC init [11-18-33.995][0000.318] I> Task: Load membct [11-18-34.004][0000.321] I> RAM_CODE 0x4000431 [11-18-34.021][0000.324] I> Loading MEMBCT [11-18-34.021][0000.327] I> Slot: 0 [11-18-34.022][0000.329] I> Binary[0] block-3840 (partition size: 0x40000) [11-18-34.022][0000.334] I> Binary name: MEM-BCT-0 [11-18-34.022][0000.338] I> Size of crypto header is 8192 [11-18-34.022][0000.342] I> Size of crypto header is 8192 [11-18-34.030][0000.346] I> strt_pg_num(3840) num_of_pgs(16) read_buf(0x40050000) [11-18-34.030][0000.352] I> BCH of MEM-BCT-0 read from storage [11-18-34.034][0000.356] I> BCH address is : 0x40050000 [11-18-34.050][0000.360] I> MEM-BCT-0 header integrity check is success [11-18-34.051][0000.365] I> Binary magic in BCH component 0 is MEM0 [11-18-34.055][0000.370] I> component binary type is 0 [11-18-34.056][0000.374] I> strt_pg_num(3856) num_of_pgs(115) read_buf(0x40040000) [11-18-34.066][0000.381] I> MEM-BCT-0 binary is read from storage [11-18-34.070][0000.385] I> MEM-BCT-0 binary integrity check is success [11-18-34.096][0000.391] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [11-18-34.096][0000.397] I> RAM_CODE 0x4000431 [11-18-34.097][0000.403] I> RAM_CODE 0x4000431 [11-18-34.123][0000.407] I> Task: Load Page retirement list [11-18-34.124][0000.411] I> Task: SDRAM params override [11-18-34.124][0000.414] I> Task: Save mem-bct info [11-18-34.124][0000.418] I> Task: Carveout allocate [11-18-34.124][0000.421] I> RCM blob carveout will not be allocated [11-18-34.125][0000.426] I> Update CCPLEX IST carveout from MB1-BCT [11-18-34.125][0000.431] I> ECC region[0]: Start:0x0, End:0x0 [11-18-34.125][0000.435] I> ECC region[1]: Start:0x0, End:0x0 [11-18-34.126][0000.439] I> ECC region[2]: Start:0x0, End:0x0 [11-18-34.127][0000.444] I> ECC region[3]: Start:0x0, End:0x0 [11-18-34.147][0000.448] I> ECC region[4]: Start:0x0, End:0x0 [11-18-34.148][0000.452] I> Non-ECC region[0]: Start:0x80000000, End:0x1080000000 [11-18-34.148][0000.458] I> Non-ECC region[1]: Start:0x0, End:0x0 [11-18-34.148][0000.463] I> Non-ECC region[2]: Start:0x0, End:0x0 [11-18-34.149][0000.468] I> Non-ECC region[3]: Start:0x0, End:0x0 [11-18-34.158][0000.472] I> Non-ECC region[4]: Start:0x0, End:0x0 [11-18-34.168][0000.483] I> allocated(CO:44) base:0x1049800000 size:0x36800000 align: 0x100000 [11-18-34.173][0000.490] I> allocated(CO:31) base:0x1040000000 size:0x8000000 align: 0x8000000 [11-18-34.182][0000.497] I> allocated(CO:43) base:0x103c000000 size:0x4000000 align: 0x200000 [11-18-34.187][0000.504] I> allocated(CO:39) base:0x1039e00000 size:0x2200000 align: 0x10000 [11-18-34.196][0000.511] I> allocated(CO:20) base:0x1036000000 size:0x2000000 align: 0x2000000 [11-18-34.203][0000.519] I> allocated(CO:24) base:0x1034000000 size:0x2000000 align: 0x2000000 [11-18-34.218][0000.526] I> allocated(CO:28) base:0x1032000000 size:0x2000000 align: 0x2000000 [11-18-34.225][0000.533] I> allocated(CO:29) base:0x1030000000 size:0x2000000 align: 0x2000000 [11-18-34.226][0000.540] I> allocated(CO:22) base:0x1048000000 size:0x1000000 align: 0x1000000 [11-18-34.232][0000.548] I> allocated(CO:35) base:0x1038e00000 size:0x1000000 align: 0x100000 [11-18-34.246][0000.555] I> allocated(CO:41) base:0x102f000000 size:0x1000000 align: 0x100000 [11-18-34.247][0000.562] I> allocated(CO:02) base:0x1049000000 size:0x800000 align: 0x800000 [11-18-34.253][0000.569] I> allocated(CO:03) base:0x1038000000 size:0x800000 align: 0x800000 [11-18-34.267][0000.576] I> allocated(CO:06) base:0x102e800000 size:0x800000 align: 0x800000 [11-18-34.268][0000.583] I> allocated(CO:56) base:0x102e000000 size:0x800000 align: 0x200000 [11-18-34.288][0000.590] I> allocated(CO:07) base:0x1038800000 size:0x400000 align: 0x400000 [11-18-34.289][0000.597] I> allocated(CO:33) base:0x102dc00000 size:0x400000 align: 0x200000 [11-18-34.290][0000.604] I> allocated(CO:19) base:0x102d980000 size:0x280000 align: 0x10000 [11-18-34.302][0000.611] I> allocated(CO:23) base:0x1038c00000 size:0x200000 align: 0x200000 [11-18-34.303][0000.618] I> allocated(CO:01) base:0x102d800000 size:0x100000 align: 0x100000 [11-18-34.309][0000.625] I> allocated(CO:05) base:0x102d700000 size:0x100000 align: 0x100000 [11-18-34.323][0000.632] I> allocated(CO:08) base:0x102d600000 size:0x100000 align: 0x100000 [11-18-34.324][0000.639] I> allocated(CO:09) base:0x102d500000 size:0x100000 align: 0x100000 [11-18-34.337][0000.646] I> allocated(CO:12) base:0x102d400000 size:0x100000 align: 0x100000 [11-18-34.338][0000.653] I> allocated(CO:15) base:0x102d300000 size:0x100000 align: 0x100000 [11-18-34.344][0000.660] I> allocated(CO:17) base:0x102d200000 size:0x100000 align: 0x100000 [11-18-34.356][0000.667] I> allocated(CO:27) base:0x102d100000 size:0x100000 align: 0x100000 [11-18-34.359][0000.674] I> allocated(CO:42) base:0x102d000000 size:0x100000 align: 0x100000 [11-18-34.372][0000.681] I> allocated(CO:54) base:0x102d900000 size:0x80000 align: 0x80000 [11-18-34.373][0000.688] I> allocated(CO:34) base:0x102cff0000 size:0x10000 align: 0x10000 [11-18-34.379][0000.695] I> allocated(CO:72) base:0x102cdf0000 size:0x200000 align: 0x10000 [11-18-34.393][0000.702] I> allocated(CO:47) base:0x102c800000 size:0x400000 align: 0x200000 [11-18-34.394][0000.709] I> allocated(CO:50) base:0x102c600000 size:0x200000 align: 0x100000 [11-18-34.406][0000.716] I> allocated(CO:52) base:0x102cdc0000 size:0x30000 align: 0x10000 [11-18-34.407][0000.723] I> allocated(CO:48) base:0x102cda0000 size:0x20000 align: 0x10000 [11-18-34.413][0000.730] I> allocated(CO:69) base:0x102cd80000 size:0x20000 align: 0x10000 [11-18-34.419][0000.737] I> allocated(CO:49) base:0x102cd70000 size:0x10000 align: 0x10000 [11-18-34.460][0000.743] I> NSDRAM base: 0x80000000, end: 0x102cdf0000, size: 0xfacdf0000 [11-18-34.461][0000.750] I> Task: Thermal check [11-18-34.461][0000.753] I> Using min_chip_limit as min_tmon_limit [11-18-34.461][0000.758] I> Using max_chip_limit as max_tmon_limit [11-18-34.462][0000.763] I> BCT max_tmon_limit = 105 [11-18-34.462][0000.766] I> BCT min_tmon_limit = -28 [11-18-34.462][0000.770] I> BCT max_tmon_limit = 105 [11-18-34.463][0000.773] I> BCT min_tmon_limit = -28 [11-18-34.463][0000.777] I> SKU specific max_chip_limit = 105 [11-18-34.464][0000.781] I> SKU specific min_chip_limit = -28 [11-18-34.481][0000.785] I> BCT max_chip_limit = 105 [11-18-34.482][0000.789] I> BCT min_chip_limit = -28 [11-18-34.482][0000.792] I> enable_soctherm_polling = 0 [11-18-34.483][0000.796] I> max temp read = 34 [11-18-34.496][0000.799] I> min temp read = 33 [11-18-34.496][0000.802] I> Enabling thermtrip [11-18-34.497][0000.805] I> Task: Update FSI SCR with thermal fuse data [11-18-34.502][0000.810] I> Task: Enable WDT 5th expiry [11-18-34.502][0000.814] I> Task: I2C register [11-18-34.503][0000.817] I> Task: Set I2C bus freq [11-18-34.507][0000.820] I> Task: Reset FSI [11-18-34.507][0000.823] I> Task: Pinmux init [11-18-34.508][0000.826] I> Task: Prod config init [11-18-34.509][0000.830] I> Task: Pad voltage init [11-18-34.511][0000.833] I> Task: Prod init [11-18-34.522][0000.836] I> Task: Program rst req config reg [11-18-34.523][0000.840] I> Task: Common rail init [11-18-34.526][0000.844] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [11-18-34.546][0000.855] I> DONE: Thermal config [11-18-34.547][0000.859] I> DONE: SOC rail config [11-18-34.556][0000.863] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [11-18-34.557][0000.869] I> DONE: MEMIO rail config [11-18-34.557][0000.873] I> DONE: GPU rail info [11-18-34.570][0000.877] I> DONE: CV rail info [11-18-34.570][0000.880] I> Task: Mem clock src [11-18-34.571][0000.883] I> Task: Misc. board config [11-18-34.583][0000.887] I> PMIC_CONFIG: Platform config not found in MB1 BCT. [11-18-34.583][0000.893] I> Task: SDRAM init [11-18-34.584][0000.896] I> MemoryType: 4 MemBctRevision: 8 [11-18-34.586][0000.902] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 8 [11-18-34.589][0000.910] I> MSS CAR: Init PLLM [11-18-34.613][0000.913] I> MSS CAR: Init PLLHUB [11-18-34.613][0000.917] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [11-18-34.614][0000.929] I> SDRAM initialized! [11-18-34.618][0000.932] I> SDRAM Size in Total 0x1000000000 [11-18-34.618][0000.936] I> Task: Dram Ecc scrub [11-18-34.619][0000.939] I> Task: DRAM alias check [11-18-34.638][0000.956] I> Task: Program NSDRAM carveout [11-18-34.639][0000.960] I> NSDRAM carveout encryption is enabled [11-18-34.664][0000.964] I> Program NSDRAM carveout [11-18-34.664][0000.968] I> Task: Register checker [11-18-34.665][0000.972] I> Task: Enable clock-mon [11-18-34.672][0000.986] I> FMON: Fmon re-programming done [11-18-34.673][0000.990] I> Task: Mapper init [11-18-34.673][0000.993] I> Task: SC7 Context Init [11-18-34.679][0000.996] I> Task: CCPLEX IST init [11-18-34.680][0000.999] I> Task: CPU WP0 [11-18-34.700][0001.003] I> Loading MCE [11-18-34.701][0001.006] I> Slot: 0 [11-18-34.701][0001.008] I> Binary[8] block-22784 (partition size: 0x80000) [11-18-34.701][0001.013] I> Binary name: MCE [11-18-34.701][0001.016] I> Size of crypto header is 8192 [11-18-34.702][0001.020] I> Size of crypto header is 8192 [11-18-34.709][0001.024] I> strt_pg_num(22784) num_of_pgs(16) read_buf(0x4003e000) [11-18-34.710][0001.030] I> BCH of MCE read from storage [11-18-34.725][0001.034] I> BCH address is : 0x4003e000 [11-18-34.731][0001.038] I> MCE header integrity check is success [11-18-34.732][0001.043] I> Binary magic in BCH component 0 is MTSM [11-18-34.732][0001.047] I> component binary type is 8 [11-18-34.733][0001.051] I> Size of crypto header is 8192 [11-18-34.752][0001.055] I> strt_pg_num(22800) num_of_pgs(350) read_buf(0x40000000) [11-18-34.753][0001.063] I> MCE binary is read from storage [11-18-34.753][0001.068] I> MCE binary integrity check is success [11-18-34.768][0001.072] I> Binary MCE loaded successfully at 0x40000000 (0x2baf0) [11-18-34.769][0001.078] I> Size of crypto header is 8192 [11-18-34.783][0001.089] I> Size of crypto header is 8192 [11-18-34.783][0001.093] I> Sending WP0 mailbox command to PSC [11-18-34.784][0001.103] I> Task: XUSB Powergate [11-18-34.817][0001.106] I> Skipping powergate XUSB. [11-18-34.818][0001.109] I> Task: MB1 fixed firewalls [11-18-34.819][0001.116] W> Firewall readback mismatch [11-18-34.822][0001.121] I> Task: Load bpmp-fw [11-18-34.822][0001.124] I> Slot: 0 [11-18-34.822][0001.126] I> Binary[15] block-9984 (partition size: 0x180000) [11-18-34.822][0001.131] I> Binary name: BPMP_FW [11-18-34.823][0001.134] I> Size of crypto header is 8192 [11-18-34.824][0001.138] I> Size of crypto header is 8192 [11-18-34.827][0001.142] I> strt_pg_num(9984) num_of_pgs(16) read_buf(0x807fe000) [11-18-34.828][0001.148] I> BCH of BPMP_FW read from storage [11-18-34.832][0001.153] I> BCH address is : 0x807fe000 [11-18-34.851][0001.156] I> BPMP_FW header integrity check is success [11-18-34.851][0001.161] I> Binary magic in BCH component 0 is BPMF [11-18-34.851][0001.166] I> component binary type is 15 [11-18-34.852][0001.170] I> Size of crypto header is 8192 [11-18-34.862][0001.174] I> strt_pg_num(10000) num_of_pgs(1990) read_buf(0x80000000) [11-18-34.893][0001.191] I> BPMP_FW binary is read from storage [11-18-34.904][0001.198] I> BPMP_FW binary integrity check is success [11-18-34.905][0001.203] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xf8bc0) [11-18-34.905][0001.209] I> Slot: 0 [11-18-34.905][0001.211] I> Binary[16] block-13056 (partition size: 0x400000) [11-18-34.905][0001.217] I> Binary name: BPMP_FW_DTB [11-18-34.906][0001.220] I> Size of crypto header is 8192 [11-18-34.906][0001.224] I> Size of crypto header is 8192 [11-18-34.909][0001.228] I> strt_pg_num(13056) num_of_pgs(16) read_buf(0x807fc000) [11-18-34.938][0001.235] I> BCH of BPMP_FW_DTB read from storage [11-18-34.939][0001.239] I> BCH address is : 0x807fc000 [11-18-34.939][0001.243] I> BPMP_FW_DTB header integrity check is success [11-18-34.939][0001.248] I> Binary magic in BCH component 0 is BPMD [11-18-34.940][0001.253] I> component binary type is 16 [11-18-34.945][0001.257] I> Size of crypto header is 8192 [11-18-34.946][0001.261] I> strt_pg_num(13072) num_of_pgs(502) read_buf(0x807bd3f0) [11-18-34.955][0001.270] I> BPMP_FW_DTB binary is read from storage [11-18-34.957][0001.275] I> BPMP_FW_DTB binary integrity check is success [11-18-34.970][0001.280] I> Binary BPMP_FW_DTB loaded successfully at 0x807bd3f0 (0x3eb00) [11-18-34.989][0001.287] I> Task: BPMP fw ast config [11-18-34.990][0001.291] I> Task: Load psc-fw [11-18-34.990][0001.294] I> Slot: 0 [11-18-34.990][0001.296] I> Binary[17] block-21248 (partition size: 0xc0000) [11-18-34.991][0001.301] I> Binary name: PSC_FW [11-18-34.992][0001.304] I> Size of crypto header is 8192 [11-18-34.997][0001.308] I> Size of crypto header is 8192 [11-18-34.997][0001.312] I> strt_pg_num(21248) num_of_pgs(16) read_buf(0x80ffe000) [11-18-35.001][0001.319] I> BCH of PSC_FW read from storage [11-18-35.002][0001.323] I> BCH address is : 0x80ffe000 [11-18-35.020][0001.327] I> PSC_FW header integrity check is success [11-18-35.020][0001.331] I> Binary magic in BCH component 0 is PFWP [11-18-35.020][0001.336] I> component binary type is 17 [11-18-35.021][0001.340] I> Size of crypto header is 8192 [11-18-35.047][0001.344] I> strt_pg_num(21264) num_of_pgs(591) read_buf(0x80fb4200) [11-18-35.048][0001.354] I> PSC_FW binary is read from storage [11-18-35.069][0001.358] I> PSC_FW binary integrity check is success [11-18-35.069][0001.363] I> Binary PSC_FW loaded successfully at 0x80fb4200 (0x49df0) [11-18-35.069][0001.370] I> Task: Load nvdec-fw [11-18-35.070][0001.373] I> Slot: 0 [11-18-35.070][0001.375] I> Binary[7] block-6400 (partition size: 0x100000) [11-18-35.070][0001.380] I> Binary name: NVDEC [11-18-35.070][0001.383] I> Size of crypto header is 8192 [11-18-35.071][0001.387] I> Size of crypto header is 8192 [11-18-35.076][0001.391] I> strt_pg_num(6400) num_of_pgs(16) read_buf(0x800fe000) [11-18-35.077][0001.397] I> BCH of NVDEC read from storage [11-18-35.093][0001.401] I> BCH address is : 0x800fe000 [11-18-35.099][0001.405] I> NVDEC header integrity check is success [11-18-35.099][0001.410] I> Binary magic in BCH component 0 is NDEC [11-18-35.099][0001.415] I> component binary type is 7 [11-18-35.100][0001.419] I> Size of crypto header is 8192 [11-18-35.122][0001.422] I> strt_pg_num(6416) num_of_pgs(560) read_buf(0x80000000) [11-18-35.122][0001.432] I> NVDEC binary is read from storage [11-18-35.123][0001.437] I> NVDEC binary integrity check is success [11-18-35.143][0001.441] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [11-18-35.147][0001.448] I> Size of crypto header is 8192 [11-18-35.157][0001.459] I> Task: Load tsec-fw [11-18-35.157][0001.462] I> TSEC-FW load support not enabled [11-18-35.159][0001.466] I> Task: GPIO interrupt map [11-18-35.172][0001.470] I> Task: SC7 context save [11-18-35.172][0001.473] I> Slot: 0 [11-18-35.172][0001.475] I> Binary[27] block-0 (partition size: 0x100000) [11-18-35.173][0001.481] I> Binary name: BR_BCT [11-18-35.173][0001.484] I> Size of crypto header is 8192 [11-18-35.174][0001.488] I> Size of crypto header is 8192 [11-18-35.177][0001.492] I> Size of crypto header is 8192 [11-18-35.177][0001.496] I> strt_pg_num(0) num_of_pgs(16) read_buf(0xa0000000) [11-18-35.186][0001.502] I> BR_BCT binary is read from storage [11-18-35.220][0001.506] I> BR_BCT binary integrity check is success [11-18-35.220][0001.511] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [11-18-35.220][0001.517] I> Slot: 0 [11-18-35.220][0001.519] I> Binary[13] block-23808 (partition size: 0x30000) [11-18-35.220][0001.525] I> Binary name: SC7-FW [11-18-35.220][0001.528] I> Size of crypto header is 8192 [11-18-35.221][0001.532] I> Size of crypto header is 8192 [11-18-35.227][0001.536] I> Size of crypto header is 8192 [11-18-35.227][0001.540] I> Size of crypto header is 8192 [11-18-35.228][0001.544] I> strt_pg_num(23808) num_of_pgs(16) read_buf(0xa0002000) [11-18-35.232][0001.550] I> BCH of SC7-FW read from storage [11-18-35.233][0001.554] I> BCH address is : 0xa0002000 [11-18-35.251][0001.558] I> SC7-FW header integrity check is success [11-18-35.251][0001.563] I> Binary magic in BCH component 0 is WB0B [11-18-35.251][0001.568] I> component binary type is 13 [11-18-35.252][0001.571] I> Size of crypto header is 8192 [11-18-35.279][0001.575] I> strt_pg_num(23824) num_of_pgs(349) read_buf(0xa0004000) [11-18-35.280][0001.583] I> SC7-FW binary is read from storage [11-18-35.302][0001.588] I> SC7-FW binary integrity check is success [11-18-35.302][0001.593] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x2ba00) [11-18-35.302][0001.599] I> Slot: 0 [11-18-35.302][0001.601] I> Binary[22] block-24192 (partition size: 0x30000) [11-18-35.302][0001.607] I> Binary name: PSC_RF [11-18-35.302][0001.610] I> Size of crypto header is 8192 [11-18-35.303][0001.614] I> Size of crypto header is 8192 [11-18-35.309][0001.618] I> Size of crypto header is 8192 [11-18-35.309][0001.622] I> Size of crypto header is 8192 [11-18-35.310][0001.626] I> strt_pg_num(24192) num_of_pgs(16) read_buf(0xa002fa00) [11-18-35.333][0001.632] I> BCH of PSC_RF read from storage [11-18-35.333][0001.636] I> BCH address is : 0xa002fa00 [11-18-35.334][0001.640] I> PSC_RF header integrity check is success [11-18-35.334][0001.645] I> Binary magic in BCH component 0 is PSCR [11-18-35.334][0001.650] I> component binary type is 22 [11-18-35.339][0001.654] I> Size of crypto header is 8192 [11-18-35.340][0001.657] I> strt_pg_num(24208) num_of_pgs(224) read_buf(0xa0031a00) [11-18-35.350][0001.665] I> PSC_RF binary is read from storage [11-18-35.351][0001.670] I> PSC_RF binary integrity check is success [11-18-35.355][0001.674] I> Binary PSC_RF loaded successfully at 0xa0031a00 (0x1be60) [11-18-35.395][0001.684] I> Task: Save WP0 payload to SC7 ctx [11-18-35.395][0001.688] I> Task: Load MB2rf binary to SC7 ctx [11-18-35.395][0001.693] I> Slot: 0 [11-18-35.396][0001.695] I> Binary[14] block-24576 (partition size: 0x20000) [11-18-35.396][0001.700] I> Binary name: MB2_RF [11-18-35.396][0001.703] I> Size of crypto header is 8192 [11-18-35.396][0001.707] I> Size of crypto header is 8192 [11-18-35.397][0001.711] I> Size of crypto header is 8192 [11-18-35.402][0001.715] I> Size of crypto header is 8192 [11-18-35.403][0001.719] I> strt_pg_num(24576) num_of_pgs(16) read_buf(0xa00d5d10) [11-18-35.427][0001.725] I> BCH of MB2_RF read from storage [11-18-35.428][0001.729] I> BCH address is : 0xa00d5d10 [11-18-35.428][0001.733] I> MB2_RF header integrity check is success [11-18-35.428][0001.738] I> Binary magic in BCH component 0 is MB2R [11-18-35.428][0001.743] I> component binary type is 14 [11-18-35.433][0001.747] I> Size of crypto header is 8192 [11-18-35.433][0001.751] I> strt_pg_num(24592) num_of_pgs(224) read_buf(0xa00d7d10) [11-18-35.448][0001.758] I> MB2_RF binary is read from storage [11-18-35.479][0001.763] I> MB2_RF binary integrity check is success [11-18-35.479][0001.768] I> Binary MB2_RF loaded successfully at 0xa00d7d10 (0x1bf60) [11-18-35.480][0001.774] I> Task: Save fuse alias data to SC7 ctx [11-18-35.480][0001.779] I> Task: Save PMIC data to SC7 ctx [11-18-35.480][0001.783] I> Task: Save Pinmux data to SC7 ctx [11-18-35.481][0001.787] I> Task: Save Pad Voltage data to SC7 ctx [11-18-35.481][0001.792] I> Task: Save controller prod data to SC7 ctx [11-18-35.481][0001.797] I> Task: Save prod cfg data to SC7 ctx [11-18-35.483][0001.801] I> Task: Save I2C bus freq data to SC7 ctx [11-18-35.511][0001.806] I> Task: Save SOCTherm data to SC7 ctx [11-18-35.511][0001.811] I> Task: Save FMON data to SC7 ctx [11-18-35.512][0001.815] I> Task: Save VMON data to SC7 ctx [11-18-35.512][0001.819] I> Task: Save TZDRAM data to SC7 ctx [11-18-35.513][0001.823] I> Task: Save GPIO int data to SC7 ctx [11-18-35.519][0001.827] I> Task: Save clock data to SC7 ctx [11-18-35.519][0001.832] I> Task: Save debug data to SC7 ctx [11-18-35.520][0001.836] I> Task: Save MBWT data to SC7 ctx [11-18-35.526][0001.844] I> SC7 context save done [11-18-35.549][0001.847] I> Task: Load MB2/Applet/FSKP [11-18-35.550][0001.851] I> Loading MB2 [11-18-35.550][0001.853] I> Slot: 0 [11-18-35.550][0001.855] I> Binary[6] block-8448 (partition size: 0x80000) [11-18-35.551][0001.861] I> Binary name: MB2 [11-18-35.552][0001.864] I> Size of crypto header is 8192 [11-18-35.556][0001.867] I> Size of crypto header is 8192 [11-18-35.557][0001.871] I> strt_pg_num(8448) num_of_pgs(16) read_buf(0x8007e000) [11-18-35.571][0001.878] I> BCH of MB2 read from storage [11-18-35.572][0001.881] I> BCH address is : 0x8007e000 [11-18-35.579][0001.885] I> MB2 header integrity check is success [11-18-35.580][0001.890] I> Binary magic in BCH component 0 is MB2B [11-18-35.580][0001.895] I> component binary type is 6 [11-18-35.581][0001.898] I> Size of crypto header is 8192 [11-18-35.587][0001.902] I> strt_pg_num(8464) num_of_pgs(846) read_buf(0x80000000) [11-18-35.607][0001.913] I> MB2 binary is read from storage [11-18-35.607][0001.918] I> MB2 binary integrity check is success [11-18-35.607][0001.923] I> Binary MB2 loaded successfully at 0x80000000 (0x69a70) [11-18-35.608][0001.929] I> Task: Map CCPLEX SHARED carveout [11-18-35.619][0001.933] I> Task: Prepare MB2 params [11-18-35.619][0001.937] I> Task: Dram ecc test [11-18-35.620][0001.940] I> Task: Misc NV security settings [11-18-35.632][0001.944] I> NVDEC sticky bits programming done [11-18-35.636][0001.949] I> Successfully powergated NVDEC [11-18-35.636][0001.953] I> Task: Disable/Reload WDT [11-18-35.641][0001.956] I> Task: Program misc carveouts [11-18-35.641][0001.960] I> Program IPC carveouts [11-18-35.643][0001.963] I> Task: Disable SCPM/POD reset [11-18-35.663][0001.967] I> SLCG Global override status := 0x0 [11-18-35.664][0001.972] I> MB1: MSS reconfig completed [11-18-35.744]I> MB2 (version: 0.0.0.0-t234-54845784-22833a33) [11-18-35.745]I> t234-A01-1-Silicon (0x12347) [11-18-35.745]I> Boot-mode : Coldboot [11-18-35.745]I> Emulation: [11-18-35.746]I> Entry timestamp: 0x001e8f86 [11-18-35.746]I> Regular heap: [base:0x40040000, size:0x10000] [11-18-35.746]I> DMA heap: [base:0x102e000000, size:0x800000] [11-18-35.746]I> Task: SE error check [11-18-35.747]I> Task: Crypto init [11-18-35.747]I> Task: MB2 Params integrity check [11-18-35.747]I> Task: Enable CCPLEX WDT 5th expiry [11-18-35.748]I> Task: ARI update carveout TZDRAM [11-18-35.748]I> Task: Configure OEM set LA/PTSA values [11-18-35.749]I> Task: Check MC errors [11-18-35.767]I> Task: SMMU external bypass disable [11-18-35.768]I> Task: Enable hot-plug capability [11-18-35.768]I> Task: TZDRAM heap init [11-18-35.768]I> Task: PSC mailbox init [11-18-35.768]I> Task: Enable clock for external modules [11-18-35.768]I> Task: Measured Boot init [11-18-35.769]I> Task: fTPM silicon identity init [11-18-35.769]I> fTPM is not enabled. [11-18-35.789]I> Task: OEM SC7 context save init [11-18-35.789]I> Task: I2C register [11-18-35.790]I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout [11-18-35.790]I> Task: Program CBB PCIE AMAP regions [11-18-35.790]I> Task: Boot device init [11-18-35.790]I> Boot_device: QSPI_FLASH instance: 0 [11-18-35.791]I> Qspi clock source : pllc_out0 [11-18-35.802]I> QSPI Flash: Macronix 64MB [11-18-35.802]I> QSPI-0l initialized successfully [11-18-35.803]I> Secondary storage device: QSPI_FLASH instance: 0 [11-18-35.817]I> Secondary storage device: SDMMC_USER instance: 3 [11-18-36.027]I> sdmmc HS400 mode enabled [11-18-36.027]I> Task: Partition Manager Init [11-18-36.028]I> strt_pg_num(1) num_of_pgs(1) read_buf(0x102e001000) [11-18-36.037]I> strt_pg_num(131071) num_of_pgs(1) read_buf(0x102e001000) [11-18-36.037]I> strt_pg_num(131039) num_of_pgs(32) read_buf(0x102e001200) [11-18-36.057]I> Found 60 partitions in QSPI_FLASH (instance 0) [11-18-36.061]W> Cannot find any partition table for 00000003 [11-18-36.074]W> PARTITION_MANAGER: Failed to publish partition. [11-18-36.091]I> Found 15 partitions in SDMMC_USER (instance 3) [11-18-36.092]I> Task: Pass DRAM ECC PRL Flag to FSI [11-18-36.092]I> Task: Load and authenticate registered FWs [11-18-36.092]I> Task: Load AUXP FWs [11-18-36.095]I> Successfully register SPE FW load task with MB2 loader [11-18-36.111]I> Successfully register RCE FW load task with MB2 loader [11-18-36.111]I> Successfully register DCE FW load task with MB2 loader [11-18-36.112]I> Unpowergating APE [11-18-36.115]I> Unpowergate done [11-18-36.132]I> Successfully register APE FW load task with MB2 loader [11-18-36.132]I> Skipping FSI FW load [11-18-36.133]I> Successfully register XUSB FW load task with MB2 loader [11-18-36.133]I> Successfully register PVA FW load task with MB2 loader [11-18-36.134]I> Partition name: A_spe-fw [11-18-36.134]I> Size of partition: 589824 [11-18-36.136]I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw [11-18-36.149]I> strt_pg_num(55040) num_of_pgs(16) read_buf(0x40067a30) [11-18-36.149]I> strt_pg_num(55056) num_of_pgs(512) read_buf(0x102d600000) [11-18-36.149]I> Partition name: A_rce-fw [11-18-36.151]I> Size of partition: 1048576 [11-18-36.167]I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw [11-18-36.168]I> strt_pg_num(56192) num_of_pgs(16) read_buf(0x40067a30) [11-18-36.170]I> strt_pg_num(56208) num_of_pgs(880) read_buf(0x102d200000) [11-18-36.182]I> spe: Authentication Finalize Done [11-18-36.182]I> Binary spe loaded successfully at 0x102d600000 [11-18-36.183]I> Partition name: A_dce-fw [11-18-36.183]I> Size of partition: 5242880 [11-18-36.186]I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw [11-18-36.199]I> strt_pg_num(44800) num_of_pgs(16) read_buf(0x40067a30) [11-18-36.200]I> rce: Authentication Finalize Done [11-18-36.200]I> Binary rce loaded successfully at 0x102d200000 [11-18-36.200]I> Successfully register RCE FW context save task with MB2 loader [11-18-36.201]I> dce : oem authentication of header done [11-18-36.214]I> strt_pg_num(44816) num_of_pgs(1) read_buf(0x102e1403d8) [11-18-36.215]I> strt_pg_num(44816) num_of_pgs(8) read_buf(0x102e1403d8) [11-18-36.222]I> dce : meta-blob integrity check is success. [11-18-36.223]I> strt_pg_num(44824) num_of_pgs(512) read_buf(0x102e0003c0) [11-18-36.233]I> strt_pg_num(45336) num_of_pgs(512) read_buf(0x102e0403c0) [11-18-36.238]I> dce : will be decompressed at 0x1036000000 [11-18-36.239]I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 [11-18-36.248]I> Reserved10 0 BlockMaxSize 5 Reserved11 0 [11-18-36.294]I> strt_pg_num(45848) num_of_pgs(512) read_buf(0x102e0803c0) [11-18-36.294]I> dce : decompressed to 12065792 bytes [11-18-36.322]I> dce: plain binary integrity check is success [11-18-36.322]I> Partition name: A_adsp-fw [11-18-36.322]I> Size of partition: 2097152 [11-18-36.328]I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw [11-18-36.328]I> strt_pg_num(58240) num_of_pgs(16) read_buf(0x40067a30) [11-18-36.336]I> strt_pg_num(58256) num_of_pgs(800) read_buf(0x1038800000) [11-18-36.337]I> dce: Authentication Finalize Done [11-18-36.341]I> Binary dce loaded successfully at 0x1036000000 [11-18-36.367]I> Partition name: A_xusb-fw [11-18-36.367]I> Size of partition: 262144 [11-18-36.368]I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw [11-18-36.368]I> strt_pg_num(9472) num_of_pgs(16) read_buf(0x40067a30) [11-18-36.369]I> strt_pg_num(9488) num_of_pgs(312) read_buf(0x102d700000) [11-18-36.386]I> ape: Authentication Finalize Done [11-18-36.387]I> Binary ape loaded successfully at 0x1038800000 [11-18-36.413]I> Successfully register APE FW context save task with MB2 loader [11-18-36.413]I> Partition name: A_pva-fw [11-18-36.413]I> Size of partition: 262144 [11-18-36.413]I> Binary@ device:3/0 block-62336 (partition size: 0x40000), name: A_pva-fw [11-18-36.414]I> strt_pg_num(62336) num_of_pgs(16) read_buf(0x40067a30) [11-18-36.414]I> xusb: Authentication Finalize Done [11-18-36.414]I> Binary xusb loaded successfully at 0x102d700000 [11-18-36.414]I> Successfully register XUSB FW context save task with MB2 loader [11-18-36.415]I> pva-fw : oem authentication of header done [11-18-36.429]I> strt_pg_num(62352) num_of_pgs(1) read_buf(0x102e1403d8) [11-18-36.429]I> strt_pg_num(62352) num_of_pgs(8) read_buf(0x102e1403d8) [11-18-36.430]I> pva-fw : meta-blob integrity check is success. [11-18-36.448]I> strt_pg_num(62360) num_of_pgs(512) read_buf(0x102e0003c0) [11-18-36.449]I> pva-fw : will be decompressed at 0x102d980000 [11-18-36.456]I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 [11-18-36.457]I> Reserved10 0 BlockMaxSize 5 Reserved11 0 [11-18-36.464]I> pva-fw : decompressed to 2156512 bytes [11-18-36.472]I> pva-fw: plain binary integrity check is success [11-18-36.473]I> pva-fw: Authentication Finalize Done [11-18-36.479]I> Binary pva-fw loaded successfully at 0x102d980000 [11-18-36.510]I> Successfully register PVA FW context save task with MB2 loader [11-18-36.510]I> Task: Check MC errors [11-18-36.510]I> Task: Carveout setup [11-18-36.511]I> Program remaining OEM carveouts [11-18-36.511]I> Task: Enable FSITHERM [11-18-36.511]I> Task: Enable FSI VMON [11-18-36.511]I> FSI VMON: FSI Vmon re-calibration and fine tuning done [11-18-36.511]I> Task: Validate FSI Therm readings [11-18-36.511]I> Task: Restore XUSB sec [11-18-36.512]I> Task: Enable FSI SE clock [11-18-36.525]I> Enable FSI-SE clock... [11-18-36.525]I> Task: Initialize SBSA UART CAR [11-18-36.525]I> Task: Initialize CPUBL Params [11-18-36.526]I> CPUBL-params @ 0x1032000000 [11-18-36.542]I> Task: Ratchet update [11-18-36.542]W> Skip ratchet update - OPTIN fuse not set [11-18-36.543]I> Task: Prepare eeprom data [11-18-36.571]I> Task: Revoke PKC fuse [11-18-36.572]I> PKC revoke fuse burn not requested [11-18-36.572]I> Task: FSI padctl context save [11-18-36.572]I> Task: Unpowergate APE [11-18-36.586]W> mb2_unpowergate_ape: skip! APE is in unpowergated state [11-18-36.587]I> Task: Memctrl reconfig pending clients [11-18-36.587]I> Task: OEM firewalls [11-18-36.603]I> OEM firewalls configured [11-18-36.604]I> Task: Powergate APE [11-18-36.604]I> Powergating APE [11-18-36.604]I> Powergate done [11-18-36.617]I> Task: OEM firewall restore saved settings [11-18-36.617]I> Task: Unhalt AUXPs [11-18-36.618]I> Unhalting SPE.. [11-18-36.618]I> Enabling combined UART [11-18-36.653]spe: early_init [11-18-36.653]vic initialized [11-18-36.653]tsc initialized [11-18-36.654]aon lic initialized [11-18-36.654]spe: tag is 5243985d1b1eb3f06fac6d36bd7e74ac [11-18-36.654]spe: SafeRTOS v8.4 [11-18-36.654]spe: init [11-18-36.654]scheduler initialized [11-18-36.654]aon hsp initialized [11-18-36.655]tag initialized [11-18-36.655]tcu initialized [11-18-36.655]bpmp ipc initialized [11-18-36.655]spe: late init [11-18-36.655]cpu_nic clock initialized [11-18-36.656]apb clock initialized [11-18-36.664]pm initialized [11-18-36.664]bpmp hsp initialized [11-18-36.664]top1 hsp initialized [11-18-36.664]ccplex ipc initialized [11-18-36.665]spe: start scheduler [11-18-36.699] I> Task: Trigger mailbox for PSC-BL1 exit [11-18-36.699]I> Sending opcode 0x4d420802 to psc [11-18-36.700]I> Received ACK from psc [11-18-36.700]I> Task: Start secure NOR provision [11-18-36.700]I> Skip Secure NOR provisioning [11-18-36.701]I> Task: Trigger load FSI keyblob [11-18-36.701]I> Skipping FSI key blob copy [11-18-36.701]I> Task: Complete load FSI keyblob [11-18-36.701]I> Skipping FSI key blob copy [11-18-36.702]I> Task: MB2-PSC_FW Key Manager Init [11-18-36.702]I> Sending opcode OP_PSC_KEY_MANAGER to psc-fw [11-18-36.703]I> Sending opcode 0x4b45594d t hwwdt_init: WDT boot cfg 0x710010 sts 0x10 [11-18-36.703]bpmp: socket 0 [11-18-36.743]bpmp: base binary md5 is da583751bbfe2b7f6e204562d97ff39e [11-18-36.743]bpmp: combined binary md5 is 39f77b2baaf3f0522607569dd3ae9a48 [11-18-36.743]bpmp: firmware tag is 39f77b2baaf3f0522607-da583751bbf [11-18-36.743]initialized vwdt [11-18-36.743]initialized mail_early [11-18-36.743]initialized fuse [11-18-36.744]initialized vfrel [11-18-36.744]initialized adc [11-18-36.744]fmon_populate_monitors: found 199 monitors [11-18-36.744]initialized fmon [11-18-36.744]initialized mc [11-18-36.744]initialized reset [11-18-36.744]initialized uphy_early [11-18-36.745]initialized emc_early [11-18-36.745]initialized pm [11-18-36.745]465 clocks registered [11-18-36.745]initialized clk_mach [11-18-36.745]initialized clk_cal_early [11-18-36.789]initialized clk_mach_early_config [11-18-36.790]initialized io_dpd [11-18-36.790]initialized soctherm [11-18-36.790]initialized regime [11-18-36.790]initialized i2c [11-18-36.791]vrmon_dt_init: vrmon node not found [11-18-36.791]vrmon_chk_boot_state: found 0 rail monitors [11-18-36.791]initialized vrmon [11-18-36.792]initialized regulator [11-18-36.792]o psc [11-18-36.792]I> Received ACK from psc [11-18-36.792]I> Task: Unhalt FSI [11-18-36.793]I> FSI unhalt skipped [11-18-36.793]I> Task: Unhalt AUXPs [11-18-36.793]I> Unhalting RCE [11-18-36.793]I> RCE unhalt successful [11-18-36.794]I> Unhalting DCE [11-18-36.794]I> DCE unhalt successful [11-18-36.794]I> APE unhalt skipped [11-18-36.794]I> Task: Load HV/CPUBL [11-18-36.795]I> Task: Load TOS [11-18-36.833]I> Task: Trigger load TS[ 2.771569] Camera-FW on t234-rce-safe started [11-18-36.834]initialized avfs_clk_platform [11-18-36.834]initialized powergate [11-18-36.834]TCU early console enabled. [11-18-36.835]EC leyinitialized dvs [11-18-36.835]initialized clk_mach_config [11-18-36.835]initialized suspend [11-18-36.836]initialized strap [11-18-36.836]initialized mce_dbell [11-18-36.836]blob [11-18-36.836]I> Sending opcode 0x53535452 to psc [11-18-36.837] I> Sent opcode to psc [11-18-36.838]I> Task: Load and authenticate registered FWs [11-18-36.838]I> Partition name: A_cpu-bootloader [11-18-36.838]I> Size of partition: 3670016 [11-18-36.838]I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloader [11-18-36.878]DCE Started [11-18-36.879]I> strt_pg_num(24832) num_of_pgs(16) read_buf(0x40067a30) [11-18-36.879]I> cpubl : oem authentication of header done [11-18-36.879]I> strt_pg_num(24848) num_of_pgs(1) read_buf(0x102e143f98) [11-18-36.880]I> strt_pg_num(24848) num_of_pgs(8) read_buf(0x102e143f98) [11-18-36.880]DCE_R5_Init [11-18-36.880]I> cpubl : meta-blob integrity check is success. [11-18-36.880]I> strt_pg_num(initialized emc [11-18-36.881]initialized emc_mrq [11-18-36.881]MPU enabled [11-18-36.881]24856) num_of_pgs(512) read_buf(0initialized clk_cal [11-18-36.882]initialized uphy_dt [11-18-36.883]initialized uphy_mrq [11-18-36.923]HSIO UPHY reset has been de-asserted 0x0 [11-18-36.924]x10initialized uphy [11-18-36.924]2e003f80) [11-18-36.924]DCE_SW_Init [11-18-36.925]initialized pg_late [11-18-36.925]initialized pg_mrq_init [11-18-36.925]swdtimer_init: reg polling start w period 47 ms [11-18-36.925]initialized swdtimer [11-18-36.926]initialized hwwdt_late [11-18-36.926]initialized bwmgr [11-18-36.926]initialized thermal_host_trip [11-18-36.927]initialized thermal_mrq [11-18-36.927]initialized oc_mrq [11-18-36.927]initialized reset_mrq [11-18-36.927]initialized mail_mrq [11-18-36.928]initialized fmon_mrq [11-18-36.928]initialized clk_mrq [11-18-36.928]initialized avfs_mrq [11-18-36.928]initialized i2c_mrq [11-18-36.929]initialized tag_mrq [11-18-36.929]initialized bwmgr_mrq [11-18-36.930]initialized console_mrq [11-18-36.968]missing prod DT calibration data for 199 fmons [11-18-36.969]initialized clk_sync_fmon_post [11-18-36.969]I> strt_pg_num(25368) num_of_pgs(512) read_buf(0x102e043f80) [11-18-36.969]I> cpubl : willinitialized clk_cal_late [11-18-36.970]initialized noc_late [11-18-36.970]initialized cvc [11-18-36.970] be decompressed at 0x102c800000 [11-18-36.970]initialized avfs_clk_mach_post [11-18-36.971]initialized avfs_clk_platform_post [11-18-36.971]initialized cvc_late [11-18-36.971]initialized rm [11-18-36.972]initialized console_late [11-18-36.972]handling unreferenced clks [11-18-36.972]enable can1_core [11-18-36.972]enable can1_host [11-18-36.973]enable can2_core [11-18-36.973]enable can2_host [11-18-36.974]enable pwm3 [11-18-37.012]enable mss_encrypt [11-18-37.013]enable maud [11-18-37.013]enable pllg_ref [11-18-37.013]enable dsi_core [11-18-37.014]enable aza_2xbit [11-18-37.014]enable pllc4_muxed [11-18-37.014]enable sdmmc4_axicif [11-18-37.014]enable xusb_ss [11-18-37.015]enable xusb_fs [11-18-37.015]enable xusb_falcon [11-18-37.015]enable xusb_core_mux [11-18-37.015]enable dsi_lp [11-18-37.016]enable sdmmc_legacy_tm [11-18-37.016]initialized clk_mach_p[ 2.973020] Camera-FW on t234-rce-safe ready SHA1=e2238c99 (crt 12.427 ms,ost [11-18-37.017]initialized pg_post [11-18-37.017]initialized regulator_post [11-18-37.017]initialized profile [11-18-37.017]ini total boot 214.951 ms) [11-18-37.018]tialized mrq [11-18-37.018]initialized patrol_scrubber [11-18-37.020]initialized cactmon [11-18-37.058]initialized extras_post [11-18-37.058]bpmp: init complete [11-18-37.059]I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 [11-18-37.059]I> Reserved10 0 BlockMaxSize 5 Reserved11 0 [11-18-37.059]I> strt_pg_num(25880) num_of_pgs(512) read_buf(0x102e083f80) [11-18-37.060]I> strt_pg_num(26392) num_of_pgs(512) read_buf(0x102e0c3f80) [11-18-37.060]I> strt_pg_num(26904) num_of_pgs(512) read_buf(0x102e103f80) [11-18-37.060]I> strt_pg_num(27416) num_of_pgs(512) read_buf(0x102e003f80) [11-18-37.062]I> strt_pg_num(27928) num_of_pgs(512) read_buf(0x102e043f80) [11-18-37.102]I> strt_pg_num(28440) num_of_pgs(512) read_buf(0x102e083f80) [11-18-37.103]I> strt_pg_num(28952) num_of_pgs(512) read_buf(0x102e0c3f80) [11-18-37.103]I> strt_pg_num(29464) num_of_pgs(512) read_buf(0x102e103f80) [11-18-37.103]I> strt_pg_num(29976) num_of_pgs(512) read_buf(0x102e003f80) [11-18-37.104]Admin Task Init [11-18-37.104]Admin Task Init complete [11-18-37.104]Print Task Init [11-18-37.104]RM Task Init [11-18-37.105]SHA Task Init [11-18-37.105]Admin Task Started [11-18-37.105]DCE SC7 SHA Enabled [11-18-37.106]RM Task Started [11-18-37.106]RM Task Running [11-18-37.106]Print Task Started [11-18-37.106]Print Task Running [11-18-37.107]SHA Task Started [11-18-37.107]DCE: FW Boot Complete [11-18-37.107]Admin Task Running [11-18-37.108]SHA Task Running [11-18-37.147]I> strt_pg_num(30488) num_of_pgs(512) read_buf(0x102e043f80) [11-18-37.147]I> strt_pg_num(31000) num_of_pgs(512) read_buf(0x102e083f80) [11-18-37.147]I> cpubl : decompressed to 3616896 bytes [11-18-37.148]I> cpubl: plain binary integrity check is success [11-18-37.148]I> Partition name: A_secure-os [11-18-37.148]I> Size of partition: 4194304 [11-18-37.149]I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os [11-18-37.149]I> strt_pg_num(32000) num_of_pgs(16) read_buf(0x40067a30) [11-18-37.149]I> strt_pg_num(32016) num_of_pgs(3672) read_buf(0x103fd35000) [11-18-37.150]I> MB2-params @ 0x40060000 [11-18-37.191]I> NSDRAM carveout base: 0x80000000, size: 0xfacdf0000 [11-18-37.192]I> cpubl_params: nsdram: carveout: 1, encryption: 1 [11-18-37.192]I> cpubl: Authentication Finalize Done [11-18-37.192]I> Binary cpubl loaded successfully at 0x102c800000 [11-18-37.193]I> tos: Authentication Finalize Done [11-18-37.193]I> Binary tos loaded successfully at 0x103fd35000 [11-18-37.193]I> Relocating OP-TEE dtb from: 0x103feff180 to 0x103c040020, size: 0x2754 [11-18-37.194]I> [0] START: 0x80000000, SIZE: 0xfacdf0000 [11-18-37.194]I> [1] START: 0x1032000000, SIZE: 0x2000000 [11-18-37.195]I> Setting NS memory ranges to OP-TEE dtb finished. [11-18-37.237]I> Partition name: A_eks [11-18-37.238]I> Size of partition: 262144 [11-18-37.238]I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks [11-18-37.238]I> strt_pg_num(44288) num_of_pgs(16) read_buf(0x40067a30) [11-18-37.239]I> strt_pg_num(44304) num_of_pgs(8) read_buf(0x103c020000) [11-18-37.239]I> eks: Authentication Finalize Done [11-18-37.239]I> Binary eks loaded successfully at 0x103c020000 [11-18-37.239]I> EKB detected (length: 0x410) @ VA:0x103c020000 [11-18-37.240]I> Task: Add cpubl params integrity check [11-18-37.240]I> Added cpubl params digest. [11-18-37.241]I> Task: Prepare TOS params [11-18-37.249]I> Setting EKB blob info to OPTEE dtb finished. [11-18-37.249]I> Setting OPTEE arg3: 0x103c040020 [11-18-37.249]I> NVRNG: Health check success [11-18-37.251]I> NVRNG: Health check success [11-18-37.265]I> Task: OEM SC7 context save [11-18-37.297]I> OEM sc7 context saved [11-18-37.297]I> Task: Disable MSS perf stats [11-18-37.297]I> Task: Program display sticky bits [11-18-37.297]I> Task: Storage device deinit [11-18-37.298]I> Task: SMMU init [11-18-37.298]I> Task: Program GICv3 registers [11-18-37.298]I> Task: Audit firewall settings [11-18-37.299]I> Task: Bootchain failure check [11-18-37.299]I> Current Boot-Chain Slot: 0 [11-18-37.299]I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 [11-18-37.300]I> Task: Burn RESERVED_ODM0 fuse [11-18-37.300]I> Task: Lock fusing [11-18-37.300]I> Task: Clear dec source key [11-18-37.300]I> MB2 finished [11-18-37.300] [11-18-37.301]NOTICE: BL31: v2.8(release):e12e3fa93 [11-18-37.329]NOTICE: BL31: Built : 17:14:28, Jan 7 2025 [11-18-37.419]I/TC: [11-18-37.464]I/TC: Non-secure external DT found [11-18-37.570]I/TC: OP-TEE version: 4.2 (gcc version 11.3.0 (Buildroot 2022.08)) #2 Wed Jan 8 01:24:03 UTC 2025 aarch64 [11-18-37.610]I/TC: WARNING: This OP-TEE configuration might be insecure! [11-18-37.611]I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html [11-18-37.652]I/TC: Primary CPU initializing [11-18-37.804]I/TC: Test OEM keys are being used. This is insecure for shipping products! [11-18-37.855]I/TC: fTPM ID is not enabled. [11-18-37.855]I/TC: ftpm-helper PTA: fTPM DT or EKB is not available. fTPM provisioning is not supported. [11-18-37.894]I/TC: Primary CPU switching to normal world boot [11-18-37.910] Jetson UEFI firmware (version 36.4.3-gcid-38968081 built on 2025-01-08T01:18:20+00:00) [11-18-38.202] [11-18-38.447] [11-18-38.493] [11-18-38.493] [11-18-38.893] [11-18-38.893] [11-18-38.893] [11-18-38.893] [11-18-38.893] [11-18-38.893] [11-18-38.893] [11-18-38.893] [11-18-38.893] [11-18-38.893] [11-18-38.893] [11-18-38.893] [11-18-38.893] [11-18-38.894] [11-18-38.894] [11-18-38.894] [11-18-38.894] [11-18-38.894] [11-18-38.894] [11-18-38.894] [11-18-38.894] [11-18-38.894] [11-18-38.895] [11-18-38.895] [11-18-38.895] [11-18-38.895] [11-18-38.895] [11-18-38.895] [11-18-38.895] [11-18-38.895] [11-18-38.895] [11-18-38.896] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.206] [11-18-39.207] [11-18-39.207] [11-18-39.208] [11-18-39.208] [11-18-39.208] [11-18-39.208]I/TC: Reserved shared memory is disabled [11-18-39.209]I/TC: Dynamic shared memory is enabled [11-18-39.263]I/TC: Normal World virtualization support is disabled [11-18-39.264]I/TC: Asynchronous notifications are disabled [11-18-39.615]I/TC: WARNING: Test UEFI variable auth key is being used ! [11-18-39.617]I/TC: WARNING: UEFI variable protection is not fully enabled ! [11-18-39.938] [11-18-39.938] [11-18-39.938] [11-18-39.938] [11-18-39.938] [11-18-39.938] [11-18-39.938] [11-18-39.938] [11-18-39.938] [11-18-39.938] [11-18-39.938] [11-18-39.938] [11-18-39.938] [11-18-39.939] [11-18-39.939] [11-18-39.939] [11-18-39.939] [11-18-39.939] [11-18-39.939] [11-18-39.939] [11-18-39.939] [11-18-39.985] [11-18-39.986] [11-18-40.046] [11-18-40.046] [11-18-40.046] [11-18-40.046] [11-18-40.153] [11-18-40.153] [11-18-40.153] [11-18-40.153] [11-18-40.153] [11-18-40.153] [11-18-40.153] [11-18-40.154] [11-18-40.184] [11-18-40.185] [11-18-40.214] [11-18-40.322] [ 6.273939] Camera-FW on t234-rce-safe started [11-18-40.323]TCU early console enabled. [11-18-40.323] [11-18-40.323] [11-18-40.413] [ 6.335747] Camera-FW on t234-rce-safe ready SHA1=e2238c99 (crt 1.357 ms, total boot 63.228 ms) [11-18-40.416] [11-18-40.416] [11-18-40.416] [11-18-40.416] [11-18-40.416] [11-18-40.768] [11-18-40.768] [11-18-40.768] [11-18-40.768] [11-18-40.768] [11-18-40.768] [11-18-40.768] [11-18-40.768] [11-18-40.768] [11-18-40.768] [11-18-40.768] [11-18-40.768] [11-18-40.768] [11-18-40.768] [11-18-40.769] [11-18-40.776] [11-18-40.776] [11-18-40.777] [11-18-41.199] [11-18-41.200] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.522] [11-18-41.523] [11-18-41.524] [11-18-41.722] [11-18-41.722] [11-18-41.722] [11-18-41.722] [11-18-41.722] [11-18-41.722] [11-18-41.722] [11-18-41.722] [11-18-41.722] [11-18-41.722] [11-18-41.722] [11-18-41.722] [11-18-41.723] [11-18-41.798] [11-18-41.799] [11-18-43.610] [11-18-43.610] [11-18-43.610] [11-18-43.610] [11-19-47.766] [11-19-47.859] [11-19-47.859] [11-19-47.859] [11-19-47.859] [11-19-47.860] [11-19-49.386]Jetson System firmware version 36.4.3-gcid-38968081 date 2025-01-08T01:18:20+00: [11-19-49.386]00 [11-19-49.387]ESC to enter Setup. [11-19-49.393]F11 to enter Boot Manager Menu. [11-19-49.394]Enter to continue boot. [11-19-54.960]L4TLauncher: Attempting Direct Boot [11-19-57.587]EFI stub: Booting Linux Kernel... [11-19-57.615]EFI stub: Using DTB from configuration table [11-19-57.616]EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path [11-19-57.633]EFI stub: Exiting boot services... [11-19-59.797]debugfs initialized [11-20-02.377]I/TC: Reserved shared memory is disabled [11-20-02.378]I/TC: Dynamic shared memory is enabled [11-20-02.415]I/TC: Normal World virtualization support is disabled [11-20-02.416]I/TC: Asynchronous notifications are disabled [11-20-02.420][ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [11-20-02.433][ 0.000000] Linux version 5.15.148-rt-tegra (ma@ubuntu) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2022.08) 11.3.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT_RT Wed Aug 13 20:59:11 PDT 2025 () [11-20-02.467][ 0.000000] Machine model: NVIDIA Jetson AGX Orin Developer Kit [11-20-02.468][ 0.000000] efi: EFI v2.70 by EDK II [11-20-02.469][ 0.000000] efi: RTPROP=0x1027fdf198 TPMFinalLog=0x1018ba0000 SMBIOS=0xffff0000 SMBIOS 3.0=0x10279d0000 MEMATTR=0x1021994018 ESRT=0x1020903498 TPMEventLog=0x1018bb8018 RNG=0x10152c0018 MEMRESERVE=0x1018bbac18 [11-20-02.481][ 0.000000] random: crng init done [11-20-02.485][ 0.000000] secureboot: Secure boot disabled [11-20-02.495][ 0.000000] esrt: Reserving ESRT space from 0x0000001020903498 to 0x00000010209034d0. [11-20-02.504][ 0.000000] Reserved memory: created CMA memory pool at 0x0000000ff5000000, size 512 MiB [11-20-02.518][ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [11-20-02.522][ 0.000000] NUMA: No NUMA configuration found [11-20-02.536][ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x0000001033ffffff] [11-20-02.539][ 0.000000] NUMA: NODE_DATA [mem 0x1022d187c0-0x1022d1afff] [11-20-02.540][ 0.000000] Zone ranges: [11-20-02.550][ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [11-20-02.551][ 0.000000] DMA32 empty [11-20-02.568][ 0.000000] Normal [mem 0x0000000100000000-0x0000001033ffffff] [11-20-02.569][ 0.000000] Movable zone start for each node [11-20-02.570][ 0.000000] Early memory node ranges [11-20-02.574][ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [11-20-02.583][ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [11-20-02.589][ 0.000000] node 0: [mem 0x0000000100000000-0x0000001018a31fff] [11-20-02.597][ 0.000000] node 0: [mem 0x0000001018a32000-0x0000001018baffff] [11-20-02.611][ 0.000000] node 0: [mem 0x0000001018bb0000-0x0000001018bbafff] [11-20-02.613][ 0.000000] node 0: [mem 0x0000001018bbb000-0x0000001018bbbfff] [11-20-02.627][ 0.000000] node 0: [mem 0x0000001018bbc000-0x000000102609ffff] [11-20-02.628][ 0.000000] node 0: [mem 0x00000010260a0000-0x0000001027fdffff] [11-20-02.641][ 0.000000] node 0: [mem 0x0000001027fe0000-0x000000102c5fffff] [11-20-02.642][ 0.000000] node 0: [mem 0x000000102c600000-0x000000102c7fffff] [11-20-02.648][ 0.000000] node 0: [mem 0x000000102c800000-0x000000102cd6ffff] [11-20-02.663][ 0.000000] node 0: [mem 0x000000102d700000-0x000000102d7fffff] [11-20-02.665][ 0.000000] node 0: [mem 0x0000001032000000-0x0000001033ffffff] [11-20-02.678][ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000001033ffffff] [11-20-02.679][ 0.000000] On node 0, zone Normal: 2448 pages in unavailable ranges [11-20-02.691][ 0.000000] On node 0, zone Normal: 18432 pages in unavailable ranges [11-20-02.692][ 0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges [11-20-02.701][ 0.000000] psci: probing for conduit method from DT. [11-20-02.703][ 0.000000] psci: PSCIv1.1 detected in firmware. [11-20-02.712][ 0.000000] psci: Using standard PSCI v0.2 function IDs [11-20-02.713][ 0.000000] psci: Trusted OS migration not required [11-20-02.723][ 0.000000] psci: SMC Calling Convention v1.2 [11-20-02.725][ 0.000000] percpu: Embedded 28 pages/cpu s77744 r8192 d28752 u114688 [11-20-02.729][ 0.000000] Detected PIPT I-cache on CPU0 [11-20-02.767][ 0.000000] CPU feWARNING: clock_disable: clk_power_ungate on gated domain 35 for gpusysclk [11-20-02.770]atures: detected: Address authentication (architected algorithm) [11-20-02.771][ 0.000000] CPU features: detected: GIC system register CPU interface [11-20-02.771][ 0.000000] CPU features: detected: Virtualization Host Extensions [11-20-02.771][ 0.000000] CPU features: detected: Hardware dirty bit management [11-20-02.772][ 0.000000] CPU features: detected: Spectre-v4 [11-20-02.773]WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc1clk [11-20-02.814][ 0.000000] CPU features: detected: Spectre-BHB [11-20-02.814][ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [11-20-02.815][ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [11-20-02.815][ 0.000000] alternatives: patching kernel code [11-20-02.815][ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16187760 [11-20-02.816][ 0.000000] Policy zone: Normal [11-20-02.818][ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 firmware_class.path=/etc/firmware fbcon=map:0 nospectre_bhb videoWARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc0clk [11-20-02.863]=efifb:off console=tty0 bl_prof_dataptr=2031616@0x102C610000 bl_prof_ro_ptr=65536@0x102C600000 [11-20-02.864][ 0.000000] Unknown kernel command line parameters "mminit_loglevel=4 fbcon=map:0 bl_prof_dataptr=2031616@0x102C610000 bl_prof_ro_ptr=65536@0x102C600000", will be passed to user space. [11-20-02.901][ 0.000000] Dentry cache hash table entWARNING: clock_disable: clk_power_ungate on gated domain 34 for dla1_core [11-20-02.903]ries: 8388608 (order: 14, 67108864 bytes, linear) [11-20-02.903][ 0.000000] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [11-20-02.903][ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [11-20-02.904][ 0.000000] software IO TLB: mapped [mem 0x00000000fbfe0000-0x00000000fffe0000] (64MB) [11-20-02.906]WARNING: clock_disable: clk_power_ungate on gated domain 34 for nafll_dla1_core [11-20-02.945][ 0.000000] Memory: 63803132K/65780160K available (18944K kernel code, 4044K rwdata, 9864K rodata, 7488K init, 551K bss, 1452740K reserved, 524288K cma-reserved) [11-20-02.950][ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [11-20-02.950][ 0.000000] trace event string verifier disabled [11-20-02.951][ 0.000000] rcu: Preemptible hierarchical RCU impleWARNING: clock_disable: clk_power_ungate on gated domain 34 for dla1_falcon [11-20-02.951]mentation. [11-20-02.952][ 0.000000] rcu: RCU event tracing is enabled. [11-20-02.954][ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12. [11-20-02.993][ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [11-20-02.994][ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [11-20-02.994][ 0.000000] NoWARNING: clock_disable: clk_power_ungate on gated domain 34 for nafll_dla1_falcon [11-20-02.995] expedited grace period (rcu_normal_after_boot). [11-20-02.995][ 0.000000] Trampoline variant of Tasks RCU enabled. [11-20-02.996][ 0.000000] Rude variant of Tasks RCU enabled. [11-20-02.998][ 0.000000] Tracing variant of Tasks RCU enabled. [11-20-03.037][ 0.000000] rcu: RCU calculated value of scheduler-enlistmenWARNING: clock_disable: clk_power_ungate on gated domain 34 for dla0_core [11-20-03.040]t delay is 25 jiffies. [11-20-03.040][ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [11-20-03.041][ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [11-20-03.041][ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [11-20-03.041][ 0.000000] GICv3: 960 SPIs implemented [11-20-03.042][ 0.000000] GICWARNING: clock_disable: clk_power_ungate on gated domain 34 for nafll_dla0_core [11-20-03.044]v3: 0 Extended SPIs implemented [11-20-03.083][ 0.000000] GICv3: Distributor has no Range Selector support [11-20-03.084][ 0.000000] Root IRQ handler: gic_handle_irq [11-20-03.084][ 0.000000] GICv3: 16 PPIs implemented [11-20-03.084][ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [11-20-03.085][ 0.00000WARNING: clock_disable: clk_power_ungate on gated domain 34 for dla0_falcon [11-20-03.085]0] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [11-20-03.087][ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [11-20-03.126][ 0.000000] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [11-20-03.129][ 0.00WARNING: clock_disable: clk_power_ungate on gated domain 34 for nafll_dla0_falcon [11-20-03.130]0411] Console: colour dummy device 80x25 [11-20-03.130][ 0.000421] printk: console [tty0] enabled [11-20-03.130][ 0.000490] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [11-20-03.131][ 0.000499] pid_max: default: 32768 minimum: 301 [11-20-03.132][ 0.000544] LSM: Security Framework initializing [11-20-03.135][ 0.000568] Yama: becoming mindful. [11-20-03.171][ 0.000587] SELinux: Initializing. [11-20-03.172][ 0.000882] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [11-20-03.172][ 0.001096] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [11-20-03.172][ 0.002949] rcu: Hierarchical SRCU implementation. [11-20-03.173][ 0.006031] Tegra Revision: A01 SKU: 208 CPU Process: 0 SoC Process: 0 [11-20-03.173][ 0.006347] Remapping and enabling EFI services. [11-20-03.174][ 0.007307] smp: Bringing up secondary CPUs ... [11-20-03.175][ 0.007908] Detected PIPT I-cache on CPU1 [11-20-03.216][ 0.007960] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [11-20-03.217][ 0.008005] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [11-20-03.217][ 0.008541] Detected PIPT I-cache on CPU2 [11-20-03.217][ 0.008554] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [11-20-03.218][ 0.008569] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [11-20-03.218][ 0.009044] Detected PIPT I-cache on CPU3 [11-20-03.219][ 0.009053] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [11-20-03.261][ 0.009066] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [11-20-03.262][ 0.011575] Detected PIPT I-cache on CPU4 [11-20-03.262][ 0.011601] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [11-20-03.263][ 0.011627] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [11-20-03.263][ 0.012155] Detected PIPT I-cache on CPU5 [11-20-03.263][ 0.012166] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [11-20-03.265][ 0.012181] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [11-20-03.267][ 0.012666] Detected PIPT I-cache on CPU6 [11-20-03.305][ 0.012677] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [11-20-03.308][ 0.012690] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [11-20-03.308][ 0.013184] Detected PIPT I-cache on CPU7 [11-20-03.309][ 0.013195] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [11-20-03.309][ 0.013208] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [11-20-03.310][ 0.015730] Detected PIPT I-cache on CPU8 [11-20-03.311][ 0.015757] GICv3: CPU8: found redistributor 20000 region 0:0x000000000f540000 [11-20-03.351][ 0.015783] CPU8: Booted secondary processor 0x0000020000 [0x410fd421] [11-20-03.352][ 0.016313] Detected PIPT I-cache on CPU9 [11-20-03.352][ 0.016324] GICv3: CPU9: found redistributor 20100 region 0:0x000000000f560000 [11-20-03.352][ 0.016339] CPU9: Booted secondary processor 0x0000020100 [0x410fd421] [11-20-03.353][ 0.016827] Detected PIPT I-cache on CPU10 [11-20-03.353][ 0.016839] GICv3: CPU10: found redistributor 20200 region 0:0x000000000f580000 [11-20-03.355][ 0.016852] CPU10: Booted secondary processor 0x0000020200 [0x410fd421] [11-20-03.357][ 0.017330] Detected PIPT I-cache on CPU11 [11-20-03.395][ 0.017341] GICv3: CPU11: found redistributor 20300 region 0:0x000000000f5a0000 [11-20-03.398][ 0.017355] CPU11: Booted secondary processor 0x0000020300 [0x410fd421] [11-20-03.398][ 0.017414] smp: Brought up 1 node, 12 CPUs [11-20-03.399][ 0.017420] SMP: Total of 12 processors activated. [11-20-03.399][ 0.017423] CPU features: detected: 32-bit EL0 Support [11-20-03.399][ 0.017424] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [11-20-03.402][ 0.017427] CPU features: detected: Common not Private translations [11-20-03.440][ 0.017428] CPU features: detected: CRC32 instructions [11-20-03.441][ 0.017428] CPU features: detected: Data cache clean to Point of Persistence [11-20-03.441][ 0.017430] CPU features: detected: Generic authentication (architected algorithm) [11-20-03.442][ 0.017431] CPU features: detected: RCpc load-acquire (LDAPR) [11-20-03.442][ 0.017432] CPU features: detected: LSE atomic instructions [11-20-03.442][ 0.017433] CPU features: detected: Privileged Access Never [11-20-03.445][ 0.017434] CPU features: detected: RAS Extension Support [11-20-03.485][ 0.017436] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [11-20-03.486][ 0.031269] spectre-bhb mitigation disabled by command line option [11-20-03.486][ 0.044241] CPU: All CPU(s) started at EL2 [11-20-03.486][ 0.047670] devtmpfs: initialized [11-20-03.486][ 0.069731] KASLR enabled [11-20-03.487][ 0.069968] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [11-20-03.487][ 0.069995] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [11-20-03.488][ 0.079699] pinctrl core: initialized pinctrl subsystem [11-20-03.490][ 0.080879] SMBIOS 3.6.0 present. [11-20-03.530][ 0.080889] DMI: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.4.3-gcid-38968081 01/08/2025 [11-20-03.533][ 0.081574] NET: Registered PF_NETLINK/PF_ROUTE protocol family [11-20-03.534][ 0.084287] DMA: preallocated 8192 KiB GFP_KERNEL pool for atomic allocations [11-20-03.534][ 0.084958] DMA: preallocated 8192 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [11-20-03.535][ 0.085632] DMA: preallocated 8192 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [11-20-03.538][ 0.085770] audit: initializing netlink subsys (disabled) [11-20-03.574][ 0.086015] audit: type=2000 audit(0.084:1): state=initialized audit_enabled=0 res=1 [11-20-03.577][ 0.088213] thermal_sys: Registered thermal governor 'step_wise' [11-20-03.577][ 0.088218] thermal_sys: Registered thermal governor 'user_space' [11-20-03.578][ 0.088219] thermal_sys: Registered thermal governor 'power_allocator' [11-20-03.578][ 0.093153] cpuidle: using governor menu [11-20-03.578][ 0.093470] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [11-20-03.579][ 0.093655] ASID allocator initialised with 32768 entries [11-20-03.580][ 0.095820] Serial: AMBA PL011 UART driver [11-20-03.618][ 0.108102] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 118, base_baud = 0) is a SBSA [11-20-03.621][ 0.108146] printk: console [ttyAMA0] enabled [11-20-03.622][ 0.124075] platform bpmp: Fixing up cyclic dependency with 2c60000.external-memory-controller [11-20-03.622][ 0.134793] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [11-20-03.623][ 0.134803] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [11-20-03.625][ 0.134805] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [11-20-03.665][ 0.134806] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [11-20-03.666][ 0.136003] cryptd: max_cpu_qlen set to 1000 [11-20-03.666][ 0.138840] ACPI: Interpreter disabled. [11-20-03.666][ 0.141416] iommu: Default domain type: Translated [11-20-03.667][ 0.141421] iommu: DMA domain TLB invalidation policy: strict mode [11-20-03.667][ 0.142007] SCSI subsystem initialized [11-20-03.667][ 0.142256] vgaarb: loaded [11-20-03.667][ 0.142475] usbcore: registered new interface driver usbfs [11-20-03.668][ 0.142508] usbcore: registered new interface driver hub [11-20-03.669][ 0.142537] usbcore: registered new device driver usb [11-20-03.709][ 0.143005] pps_core: LinuxPPS API ver. 1 registered [11-20-03.710][ 0.143010] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [11-20-03.710][ 0.143024] PTP clock support registered [11-20-03.711][ 0.143103] EDAC MC: Ver: 3.0.0 [11-20-03.711][ 0.144804] Registered efivars operations [11-20-03.711][ 0.145602] FPGA manager framework [11-20-03.712][ 0.145699] Advanced Linux Sound Architecture Driver Initialized. [11-20-03.712][ 0.146443] Bluetooth: Core ver 2.22 [11-20-03.714][ 0.146484] NET: Registered PF_BLUETOOTH protocol family [11-20-03.756][ 0.146489] Bluetooth: HCI device and connection manager initialized [11-20-03.756][ 0.146500] Bluetooth: HCI socket layer initialized [11-20-03.756][ 0.146509] Bluetooth: L2CAP socket layer initialized [11-20-03.757][ 0.146527] Bluetooth: SCO socket layer initialized [11-20-03.757][ 0.147025] clocksource: Switched to clocksource arch_sys_counter [11-20-03.757][ 0.192252] VFS: Disk quotas dquot_6.6.0 [11-20-03.758][ 0.192334] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [11-20-03.758][ 0.192642] pnp: PnP ACPI: disabled [11-20-03.759][ 0.196905] NET: Registered PF_INET protocol family [11-20-03.798][ 0.198008] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [11-20-03.801][ 0.200835] tcp_listen_portaddr_hash hash table entries: 32768 (order: 8, 1310720 bytes, linear) [11-20-03.802][ 0.202632] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [11-20-03.803][ 0.202685] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) [11-20-03.806][ 0.203184] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes, linear) [11-20-03.843][ 0.206754] TCP: Hash tables configured (established 524288 bind 65536) [11-20-03.844][ 0.207193] UDP hash table entries: 32768 (order: 9, 3145728 bytes, linear) [11-20-03.844][ 0.211600] UDP-Lite hash table entries: 32768 (order: 9, 3145728 bytes, linear) [11-20-03.844][ 0.216353] NET: Registered PF_UNIX/PF_LOCAL protocol family [11-20-03.844][ 0.217038] RPC: Registered named UNIX socket transport module. [11-20-03.845][ 0.217044] RPC: Registered udp transport module. [11-20-03.845][ 0.217046] RPC: Registered tcp transport module. [11-20-03.847][ 0.217046] RPC: Registered tcp NFSv4.1 backchannel transport module. [11-20-03.888][ 0.217063] PCI: CLS 0 bytes, default 64 [11-20-03.889][ 0.217312] Unpacking initramfs... [11-20-03.889][ 0.231098] hw perfevents: enabled with armv8_cortex_a78 PMU driver, 7 counters available [11-20-03.889][ 0.235356] Initialise system trusted keyrings [11-20-03.889][ 0.235413] Key type blacklist registered [11-20-03.890][ 0.235524] workingset: timestamp_bits=42 max_order=24 bucket_order=0 [11-20-03.890][ 0.240938] squashfs: version 4.0 (2009/01/31) Phillip Lougher [11-20-03.890][ 0.241451] NFS: Registering the id_resolver key type [11-20-03.892][ 0.241477] Key type id_resolver registered [11-20-03.933][ 0.241480] Key type id_legacy registered [11-20-03.933][ 0.241543] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [11-20-03.933][ 0.241559] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [11-20-03.934][ 0.241583] ntfs: driver 2.1.32 [Flags: R/O]. [11-20-03.934][ 0.242002] 9p: Installing v9fs 9p2000 file system support [11-20-03.934][ 0.242830] integrity: Platform Keyring initialized [11-20-03.934][ 0.254085] Key type asymmetric registered [11-20-03.936][ 0.254091] Asymmetric key parser 'x509' registered [11-20-03.977][ 0.254162] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [11-20-03.979][ 0.254170] io scheduler mq-deadline registered [11-20-03.979][ 0.254177] io scheduler kyber registered [11-20-03.979][ 0.266218] EINJ: ACPI disabled. [11-20-03.980][ 0.279438] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [11-20-03.980][ 0.281558] SuperH (H)SCI(F) driver initialized [11-20-03.980][ 0.281958] msm_serial: driver initialized [11-20-03.980][ 0.282681] printk: console [ttyTCU0] enabled [11-20-03.981][ 0.283681] arm-smmu 8000000.iommu: probing hardware configuration... [11-20-04.022][ 0.283687] arm-smmu 8000000.iommu: SMMUv2 with: [11-20-04.023][ 0.283693] arm-smmu 8000000.iommu: stage 1 translation [11-20-04.023][ 0.283695] arm-smmu 8000000.iommu: stage 2 translation [11-20-04.023][ 0.283696] arm-smmu 8000000.iommu: nested translation [11-20-04.024][ 0.283703] arm-smmu 8000000.iommu: stream matching with 128 register groups [11-20-04.024][ 0.283706] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [11-20-04.025][ 0.283727] arm-smmu 8000000.iommu: Supported page sizes: 0x61311000 [11-20-04.025][ 0.283730] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [11-20-04.067][ 0.283731] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [11-20-04.068][ 0.284914] arm-smmu 10000000.iommu: probing hardware configuration... [11-20-04.068][ 0.284919] arm-smmu 10000000.iommu: SMMUv2 with: [11-20-04.068][ 0.284921] arm-smmu 10000000.iommu: stage 1 translation [11-20-04.069][ 0.284923] arm-smmu 10000000.iommu: stage 2 translation [11-20-04.069][ 0.284925] arm-smmu 10000000.iommu: nested translation [11-20-04.069][ 0.284940] arm-smmu 10000000.iommu: stream matching with 128 register groups [11-20-04.111][ 0.284942] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [11-20-04.114][ 0.284949] arm-smmu 10000000.iommu: Supported page sizes: 0x61311000 [11-20-04.114][ 0.284950] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [11-20-04.114][ 0.284951] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [11-20-04.115][ 0.285405] arm-smmu 12000000.iommu: probing hardware configuration... [11-20-04.115][ 0.285408] arm-smmu 12000000.iommu: SMMUv2 with: [11-20-04.115][ 0.285410] arm-smmu 12000000.iommu: stage 1 translation [11-20-04.116][ 0.285411] arm-smmu 12000000.iommu: stage 2 translation [11-20-04.157][ 0.285412] arm-smmu 12000000.iommu: nested translation [11-20-04.158][ 0.285417] arm-smmu 12000000.iommu: stream matching with 128 register groups [11-20-04.159][ 0.285419] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [11-20-04.159][ 0.285425] arm-smmu 12000000.iommu: Supported page sizes: 0x61311000 [11-20-04.159][ 0.285426] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [11-20-04.161][ 0.285427] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [11-20-04.162][ 0.309820] loop: module loaded [11-20-04.202][ 0.311327] megasas: 07.717.02.00-rc1 [11-20-04.203][ 0.316300] tun: Universal TUN/TAP device driver, 1.6 [11-20-04.203][ 0.316936] thunder_xcv, ver 1.0 [11-20-04.203][ 0.316971] thunder_bgx, ver 1.0 [11-20-04.203][ 0.317001] nicpf, ver 1.0 [11-20-04.203][ 0.317978] hclge is initializing [11-20-04.204][ 0.318010] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [11-20-04.204][ 0.318017] hns3: Copyright (c) 2017 Huawei Corporation. [11-20-04.204][ 0.318068] e1000: Intel(R) PRO/1000 Network Driver [11-20-04.206][ 0.318072] e1000: Copyright (c) 1999-2006 Intel Corporation. [11-20-04.246][ 0.318103] e1000e: Intel(R) PRO/1000 Network Driver [11-20-04.247][ 0.318108] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [11-20-04.247][ 0.318133] igb: Intel(R) Gigabit Ethernet Network Driver [11-20-04.247][ 0.318139] igb: Copyright (c) 2007-2014 Intel Corporation. [11-20-04.247][ 0.318160] igbvf: Intel(R) Gigabit Virtual Function Network Driver [11-20-04.248][ 0.318166] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [11-20-04.248][ 0.318408] sky2: driver version 1.30 [11-20-04.249][ 0.319211] VFIO - User Level meta-driver version: 0.3 [11-20-04.291][ 0.320950] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [11-20-04.291][ 0.320959] ehci-pci: EHCI PCI platform driver [11-20-04.291][ 0.320992] ehci-platform: EHCI generic platform driver [11-20-04.291][ 0.321086] ehci-orion: EHCI orion driver [11-20-04.291][ 0.321155] ehci-exynos: EHCI Exynos driver [11-20-04.292][ 0.321212] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [11-20-04.292][ 0.321278] ohci-pci: OHCI PCI platform driver [11-20-04.292][ 0.321307] ohci-platform: OHCI generic platform driver [11-20-04.293][ 0.321397] ohci-exynos: OHCI Exynos driver [11-20-04.336][ 0.321874] usbcore: registered new interface driver usb-storage [11-20-04.337][ 0.323954] i2c_dev: i2c /dev entries driver [11-20-04.337][ 0.325364] pps pps0: new PPS source ktimer [11-20-04.337][ 0.325375] pps pps0: ktimer PPS source registered [11-20-04.338][ 0.325386] pps_ldisc: PPS line discipline registered [11-20-04.338][ 0.327777] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [11-20-04.339][ 0.330165] sdhci: Secure Digital Host Controller Interface driver [11-20-04.339][ 0.330171] sdhci: Copyright(c) Pierre Ossman [11-20-04.341][ 0.330698] Synopsys Designware Multimedia Card Interface Driver [11-20-04.383][ 0.331410] sdhci-pltfm: SDHCI platform and OF driver helper [11-20-04.383][ 0.333656] SMCCC: SOC_ID: ID = jep106:036b:0234 Revision = 0x00000401 [11-20-04.383][ 0.334196] tegra-bpmp bpmp: Adding to iommu group 0 [11-20-04.384][ 0.337155] tegra-bpmp bpmp: firmware: 39f77b2baaf3f0522607-da583751bbf [11-20-04.384][ 0.475006] Freeing initrd memory: 15492K [11-20-04.384][ 3.423169] clocksource: tsc: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [11-20-04.388][ 3.423191] clocksource: osc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 49772407460 ns [11-20-04.428][ 3.423195] clocksource: usec: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [11-20-04.428][ 3.423390] hid: raw HID events driver (C) Jiri Kosina [11-20-04.429][ 3.423581] usbcore: registered new interface driver usbhid [11-20-04.429][ 3.423589] usbhid: USB HID core driver [11-20-04.429][ 3.428371] optee: probing for conduit method. [11-20-04.429][ 3.428421] optee: revision 4.2 (d78bc5fa) [11-20-04.430][ 3.488230] optee: dynamic shared memory is enabled [11-20-04.432][ 3.488497] optee: initialized driver [11-20-04.470][ 3.494354] usbcore: registered new interface driver snd-usb-audio [11-20-04.471][ 3.495667] NET: Registered PF_PACKET protocol family [11-20-04.471][ 3.496238] Bluetooth: RFCOMM TTY layer initialized [11-20-04.472][ 3.496267] Bluetooth: RFCOMM socket layer initialized [11-20-04.472][ 3.496309] Bluetooth: RFCOMM ver 1.11 [11-20-04.472][ 3.496615] 9pnet: Installing 9P2000 support [11-20-04.472][ 3.496746] Key type dns_resolver registered [11-20-04.473][ 3.498201] printk: console [tty0]: printing thread started [11-20-04.474][ 3.498726] printk: console [ttyTCU0]: printing thread started [11-20-04.490][ 3.499257] printk: console [ttyAMA0]: printing thread started [11-20-04.491][ 3.499386] Loading compiled-in X.509 certificates [11-20-04.496][ 3.503686] Loaded X.509 cert 'Build time autogenerated kernel key: 60cc6a6928bdc27a2c7d4c4b633435fa8ca57a34' [11-20-04.511][ 3.572285] gpio-394 (camera-control-output-low): hogged as output/low [11-20-04.512][ 3.572314] gpio-397 (camera-control-output-low): hogged as output/low [11-20-04.517][ 3.572333] gpio-487 (camera-control-output-low): hogged as output/low [11-20-04.536][ 3.572346] gpio-486 (camera-control-output-low): hogged as output/low [11-20-04.536][ 3.610276] simple-framebuffer chosen:framebuffer: framebuffer at 0x1039e00000, 0x870000 bytes [11-20-04.542][ 3.610286] simple-framebuffer chosen:framebuffer: format=x8r8g8b8, mode=1920x1080x32, linelength=8192 [11-20-04.550][ 3.618148] simple-framebuffer chosen:framebuffer: fb0: simplefb registered! [11-20-04.559][ 3.618853] tegra-gpcdma 2600000.dma-controller: Adding to iommu group 1 [11-20-04.570][ 3.622461] tegra-gpcdma 2600000.dma-controller: GPC DMA driver register 31 channels [11-20-04.572][ 3.623671] serial-tegra 3100000.serial: RX in PIO mode [11-20-04.579][ 3.623677] serial-tegra 3100000.serial: TX in PIO mode [11-20-04.580][ 3.623739] 3100000.serial: ttyTHS1 at MMIO 0x3100000 (irq = 112, base_baud = 0) is a TEGRA_UART [11-20-04.601][ 3.625447] serial-tegra 3110000.serial: RX in PIO mode [11-20-04.602][ 3.625452] serial-tegra 3110000.serial: TX in PIO mode [11-20-04.606][ 3.625533] 3110000.serial: ttyTHS2 at MMIO 0x3110000 (irq = 215, base_baud = 0) is a TEGRA_UART [11-20-04.611][ 3.631840] tegra_rtc c2a0000.rtc: registered as rtc1 [11-20-04.618][ 3.631856] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [11-20-04.630][ 3.632430] tegra-i2c 3160000.i2c: Adding to iommu group 1 [11-20-04.631][ 3.643058] tegra-i2c 3180000.i2c: Adding to iommu group 1 [11-20-04.641][ 3.652761] tegra-i2c 3190000.i2c: Adding to iommu group 1 [11-20-04.642][ 3.661213] tegra-i2c 31b0000.i2c: Adding to iommu group 1 [11-20-04.659][ 3.671879] tegra-i2c 31c0000.i2c: Adding to iommu group 1 [11-20-04.659][ 3.681994] tegra-i2c 31e0000.i2c: Adding to iommu group 1 [11-20-04.660][ 3.693272] tegra-i2c c240000.i2c: Adding to iommu group 1 [11-20-04.670][ 3.704663] tegra-i2c c250000.i2c: Adding to iommu group 1 [11-20-04.681][ 3.743252] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2010000 KHz, changing to: 2035200 KHz [11-20-04.693][ 3.746072] cpufreq: cpufreq_online: CPU8: Running at unlisted initial frequency: 2011000 KHz, changing to: 2035200 KHz [11-20-04.695][ 3.749332] sdhci-tegra 3460000.mmc: Adding to iommu group 2 [11-20-04.706][ 3.754422] tegra-xusb 3610000.usb: Adding to iommu group 3 [11-20-04.707][ 3.762194] mmc0: CQHCI version 5.10 [11-20-04.719][ 3.775102] tegra-xusb 3610000.usb: Firmware timestamp: 2023-02-10 03:48:10 UTC [11-20-04.721][ 3.775112] tegra-xusb 3610000.usb: xHCI Host Controller [11-20-04.729][ 3.775128] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 1 [11-20-04.734][ 3.775891] tegra-xusb 3610000.usb: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000010810 [11-20-04.743][ 3.776531] tegra-xusb 3610000.usb: irq 127, io mem 0x03610000 [11-20-04.744][ 3.776688] tegra-xusb 3610000.usb: xHCI Host Controller [11-20-04.756][ 3.776694] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 2 [11-20-04.766][ 3.776698] tegra-xusb 3610000.usb: Host supports USB 3.1 Enhanced SuperSpeed [11-20-04.767][ 3.777893] hub 1-0:1.0: USB hub found [11-20-04.780][ 3.778149] hub 1-0:1.0: 4 ports detected [11-20-04.780][ 3.778534] hub 2-0:1.0: USB hub found [11-20-04.781][ 3.778545] hub 2-0:1.0: 4 ports detected [11-20-04.796][ 3.781591] sdhci-tegra 3400000.mmc: Adding to iommu group 4 [11-20-04.796][ 3.782303] irq: IRQ249: trimming hierarchy from :bus@0:pmc@c360000 [11-20-04.801][ 3.783224] irq: IRQ250: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [11-20-04.816][ 3.784412] irq: IRQ251: trimming hierarchy from :bus@0:pmc@c360000 [11-20-04.817][ 3.785052] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [11-20-04.828][ 4.111192] usb 1-2: new high-speed USB device number 2 using tegra-xusb [11-20-04.828][ 4.204735] ALSA device list: [11-20-04.829][ 4.204741] No soundcards found. [11-20-04.844][ 4.207050] sdhci-tegra 3400000.mmc: Got CD GPIO [11-20-04.845][ 4.218814] mmc0: SDHCI controller on 3460000.mmc [3460000.mmc] using ADMA 64-bit [11-20-04.852][ 4.254673] irq: IRQ252: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [11-20-04.856][ 4.255998] mmc1: SDHCI controller on 3400000.mmc [3400000.mmc] using ADMA 64-bit [11-20-04.865][ 4.257635] Freeing unused kernel memory: 7488K [11-20-04.866][ 4.257809] Run /init as init process [11-20-04.877][ 4.266740] hub 1-2:1.0: USB hub found [11-20-04.878][ 4.267290] hub 1-2:1.0: 4 ports detected [11-20-04.878][ 4.272882] Checking overlayfs setting... [11-20-04.893][ 4.299464] Overlayfs is disabled... [11-20-04.893][ 4.306302] Root device found: mmcblk0p1 [11-20-04.894][ 4.345480] mmc0: Command Queue Engine enabled [11-20-04.905][ 4.345487] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [11-20-04.905][ 4.345939] mmcblk0: mmc0:0001 DG4064 59.2 GiB [11-20-04.915][ 4.349979] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 [11-20-04.915][ 4.350654] mmcblk0boot0: mmc0:0001 DG4064 4.00 MiB [11-20-04.926][ 4.351274] mmcblk0boot1: mmc0:0001 DG4064 4.00 MiB [11-20-04.926][ 4.351825] mmcblk0rpmb: mmc0:0001 DG4064 4.00 MiB, chardev (511:0) [11-20-04.945][ 4.469131] Found dev node: /dev/mmcblk0p1 [11-20-04.946][ 4.587020] usb 1-2.1: new low-speed USB device number 3 using tegra-xusb [11-20-04.957][ 4.727133] input: SEMICO USB Keyboard as /devices/platform/bus@0/3610000.usb/usb1/1-2/1-2.1/1-2.1:1.0/0003:1A2C:212A.0001/input/input1 [11-20-04.959][ 4.787518] hid-generic 0003:1A2C:212A.0001: input,hidraw0: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-3610000.usb-2.1/input0 [11-20-04.972][ 4.791557] input: SEMICO USB Keyboard Consumer Control as /devices/platform/bus@0/3610000.usb/usb1/1-2/1-2.1/1-2.1:1.1/0003:1A2C:212A.0002/input/input2 [11-20-04.989][ 4.795089] EXT4-fs (mmcblk0p1): recovery complete [11-20-04.998][ 4.795950] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [11-20-05.000][ 4.801195] Rootfs mounted over mmcblk0p1 [11-20-05.009][ 4.813553] Switching from initrd to actual rootfs [11-20-05.012][ 4.855392] input: SEMICO USB Keyboard System Control as /devices/platform/bus@0/3610000.usb/usb1/1-2/1-2.1/1-2.1:1.1/0003:1A2C:212A.0002/input/input3 [11-20-05.026][ 4.856006] hid-generic 0003:1A2C:212A.0002: input,hidraw1: USB HID v1.10 Device [SEMICO USB Keyboard] on usb-3610000.usb-2.1/input1 [11-20-05.041][ 4.959025] usb 1-2.2: new low-speed USB device number 4 using tegra-xusb [11-20-05.050][ 4.984873] systemd[1]: System time before build time, advancing clock. [11-20-05.051][ 5.051599] NET: Registered PF_INET6 protocol family [11-20-05.068][ 5.052246] Segment Routing with IPv6 [11-20-05.069][ 5.052255] In-situ OAM (IOAM) with IPv6 [11-20-05.082][ 5.096495] input: YSPRINGTECH USB OPTICAL MOUSE as /devices/platform/bus@0/3610000.usb/usb1/1-2/1-2.2/1-2.2:1.0/0003:10C4:0005.0003/input/input4 [11-20-05.101][ 5.097071] hid-generic 0003:10C4:0005.0003: input,hidraw2: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-3610000.usb-2.2/input0 [11-20-05.114][ 5.099258] systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [11-20-05.134][ 5.099651] systemd[1]: Detected architecture arm64. [11-20-05.135][ 5.199017] usb 1-2.4: new high-speed USB device number 5 using tegra-xusb [11-20-05.143][ 5.201441] systemd[1]: Hostname set to . [11-20-05.144][ 5.235188] systemd[1]: Using hardware watchdog 'NVIDIA Tegra186 WDT', version 0, device /dev/watchdog [11-20-05.156][ 5.235205] systemd[1]: Set hardware watchdog to 2min. [11-20-05.172][ 5.328382] usb-storage 1-2.4:1.0: USB Mass Storage device detected [11-20-05.173][ 5.328580] scsi host0: usb-storage 1-2.4:1.0 [11-20-05.178][ 5.475087] systemd[1]: /lib/systemd/system/snapd.service:23: Unknown key name 'RestartMode' in section 'Service', ignoring. [11-20-05.191][ 5.484710] systemd[1]: /etc/systemd/system/nvs-service.service:41: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [11-20-05.212][ 5.489310] systemd[1]: /etc/systemd/system/nvargus-daemon.service:42: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [11-20-05.234][ 5.543958] systemd[1]: Queued start job for default target Graphical Interface. [11-20-05.236][ 5.545650] systemd[1]: Created slice Slice /system/modprobe. [11-20-05.240][ 5.596025] systemd[1]: Created slice Slice /system/serial-getty. [11-20-05.247][ 5.657743] systemd[1]: Created slice Slice /system/systemd-fsck. [11-20-05.255][ 5.711134] systemd[1]: Created slice User and Session Slice. [11-20-05.264][ 5.762601] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [11-20-05.270][ 5.822924] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [11-20-05.282][ 5.866979] systemd[1]: Reached target Slice Units. [11-20-05.283][ 5.915918] systemd[1]: Reached target Mounting snaps. [11-20-05.286][ 5.961977] systemd[1]: Reached target Mounted snaps. [11-20-05.301][ 6.002186] systemd[1]: Reached target Swaps. [11-20-05.302][ 6.071492] systemd[1]: Reached target Local Verity Protected Volumes. [11-20-05.307][ 6.139440] systemd[1]: Listening on Device-mapper event daemon FIFOs. [11-20-05.322][ 6.226833] systemd[1]: Listening on LVM2 poll daemon socket. [11-20-05.323][ 6.321304] systemd[1]: Listening on RPCbind Server Activation Socket. [11-20-05.331][ 6.340138] scsi 0:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS [11-20-05.342][ 6.340644] sd 0:0:0:0: [sda] 60440576 512-byte logical blocks: (30.9 GB/28.8 GiB) [11-20-05.344][ 6.340775] sd 0:0:0:0: [sda] Write Protect is off [11-20-05.358][ 6.340894] sd 0:0:0:0: [sda] No Caching mode page found [11-20-05.358][ 6.340896] sd 0:0:0:0: [sda] Assuming drive cache: write through [11-20-05.359][ 6.343759] sda: sda1 [11-20-05.362][ 6.349068] sd 0:0:0:0: [sda] Attached SCSI removable disk [11-20-05.370][ 6.375257] systemd[1]: Listening on Syslog Socket. [11-20-05.377][ 6.429919] systemd[1]: Listening on fsck to fsckd communication Socket. [11-20-05.388][ 6.463442] systemd[1]: Listening on initctl Compatibility Named Pipe. [11-20-05.393][ 6.463824] systemd[1]: Listening on Journal Audit Socket. [11-20-05.406][ 6.464010] systemd[1]: Listening on Journal Socket (/dev/log). [11-20-05.407][ 6.464236] systemd[1]: Listening on Journal Socket. [11-20-05.417][ 6.464544] systemd[1]: Listening on udev Control Socket. [11-20-05.418][ 6.464709] systemd[1]: Listening on udev Kernel Socket. [11-20-05.424][ 6.466007] systemd[1]: Mounting Huge Pages File System... [11-20-05.438][ 6.467300] systemd[1]: Mounting POSIX Message Queue File System... [11-20-05.448][ 6.518511] systemd[1]: Mounting Kernel Debug File System... [11-20-05.449][ 6.520169] systemd[1]: Mounting Kernel Trace File System... [11-20-05.461][ 6.534642] systemd[1]: Starting Journal Service... [11-20-05.461][ 6.534936] systemd[1]: Finished Availability of block devices. [11-20-05.485][ 6.536819] systemd[1]: Starting Set the console keyboard layout... [11-20-05.486][ 6.554959] systemd[1]: Starting Create List of Static Device Nodes... [11-20-05.491][ 6.563587] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [11-20-05.503][ 6.565151] systemd[1]: Starting Load Kernel Module configfs... [11-20-05.504][ 6.566603] systemd[1]: Starting Load Kernel Module drm... [11-20-05.516][ 6.568665] systemd[1]: Starting Load Kernel Module efi_pstore... [11-20-05.520][ 6.598360] systemd[1]: Starting Load Kernel Module fuse... [11-20-05.531][ 6.600146] systemd[1]: Starting NVIDIA specific first-boot udev script... [11-20-05.541][ 6.613803] systemd[1]: Started Nameserver information manager. [11-20-05.546][ 6.614070] systemd[1]: Reached target Preparation for Network. [11-20-05.579][ 6.614302] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [11-20-05.580][ 6.617171] systemd[1]: Starting Load Kernel Modules... [11-20-05.581][ 6.619585] fuse: init (API version 7.34) [11-20-05.581][ 6.626820] nvsciipc: loading out-of-tree module taints kernel. [11-20-05.581][ 6.628067] nvsciipc: loaded module [11-20-05.594][ 6.643734] nvmap_heap_init: nvmap_heap_init: created heap block cache [11-20-05.616][ 6.644292] nvmap_co_device_init: vpr :dma coherent mem declare 0x0000001049800000,914358272 [11-20-05.618][ 6.644299] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [11-20-05.618][ 6.644311] nvmap_page_pool_init: Total RAM pages: 16087600 [11-20-05.619][ 6.644312] nvmap_page_pool_init: nvmap page pool size: 2010950 pages (3759 MB) [11-20-05.623][ 6.644375] nvmap_background_zero_thread: PP zeroing thread starting. [11-20-05.634][ 6.644421] nvmap_heap_create: created heap vpr base 0x0000001049800000 size (892928KiB) [11-20-05.654][ 6.644484] nvmap_heap_create: fsi :dma coherent mem declare 0x000000102f000000,16777216 [11-20-05.680][ 6.644487] nvmap_heap_create: created heap fsi base 0x000000102f000000 size (16384KiB) [11-20-05.683][ 6.655131] systemd[1]: Starting Remount Root and Kernel File Systems... [11-20-05.683][ 6.663824] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null). Quota mode: none. [11-20-05.684][ 6.664711] tegra-host1x 13e00000.host1x: Adding to iommu group 5 [11-20-05.684][ 6.666025] host1x-context host1x-ctx.0: Adding to iommu group 6 [11-20-05.685][ 6.666252] host1x-context host1x-ctx.1: Adding to iommu group 7 [11-20-05.695][ 6.666465] host1x-context host1x-ctx.2: Adding to iommu group 8 [11-20-05.696][ 6.666679] host1x-context host1x-ctx.3: Adding to iommu group 9 [11-20-05.700][ 6.666892] host1x-context host1x-ctx.4: Adding to iommu group 10 [11-20-05.708][ 6.667233] host1x-context host1x-ctx.5: Adding to iommu group 11 [11-20-05.722][ 6.667444] host1x-context host1x-ctx.6: Adding to iommu group 12 [11-20-05.723][ 6.667664] host1x-context host1x-ctx.7: Adding to iommu group 13 [11-20-05.736][ 6.667913] host1x-context host1x-ctx.8: Adding to iommu group 14 [11-20-05.737][ 6.668211] host1x-context host1x-ctx.9: Adding to iommu group 15 [11-20-05.750][ 6.668427] host1x-context host1x-ctx.10: Adding to iommu group 16 [11-20-05.751][ 6.668688] host1x-context host1x-ctx.11: Adding to iommu group 17 [11-20-05.764][ 6.668966] host1x-context host1x-ctx.12: Adding to iommu group 18 [11-20-05.765][ 6.669196] host1x-context host1x-ctx.13: Adding to iommu group 19 [11-20-05.770][ 6.669509] host1x-context host1x-ctx.14: Adding to iommu group 20 [11-20-05.777][ 6.669737] host1x-context host1x-ctx.15: Adding to iommu group 21 [11-20-05.804][ 6.720458] systemd[1]: Starting Coldplug All udev Devices... [11-20-05.805][ 6.776306] systemd[1]: Started Journal Service. [11-20-05.806][ 6.832011] nvgpu: 17000000.gpu nvgpu_nvhost_syncpt_init:122 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [11-20-05.839][ 6.832011] [11-20-05.839][ 6.904257] systemd-journald[370]: Received client request to flush runtime journal. [11-20-06.203]TCU debug prints will be routed to traces. [11-20-06.208][ 7.275364] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: ivc channel driver missing [11-20-06.224][ 7.275366] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: ivc channel driver missing [11-20-06.234][ 7.275367] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: ivc channel driver missing [11-20-06.237][ 7.275410] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivc channel driver missing [11-20-06.249][ 7.275411] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivc channel driver missing [11-20-06.269][ 7.275412] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: ivc channel driver missing [11-20-06.300][ 7.355265] (NULL device *): fops function table already registered [11-20-06.790][ 7.856540] ucsi_ccg 1-0008: i2c_transfer failed -121 [11-20-06.791][ 7.856548] ucsi_ccg 1-0008: ucsi_ccg_init failed - -121 [11-20-06.806][ 7.856553] ucsi_ccg: probe of 1-0008 failed with error -121 [11-20-06.926]Starting RmBootstrap [11-20-06.927]Registered event_type:[0] for dce_core_ipc_type:[1] [11-20-06.944]Registered event_type:[1] for dce_core_ipc_type:[3] [11-20-06.944]dce_ipc State Initialized [11-20-06.946]RmBootstrap completed successfully [11-20-09.703][ 10.765119] using random self ethernet address [11-20-09.704][ 10.765128] using random host ethernet address [11-20-09.994][ 11.049797] using random self ethernet address [11-20-09.995][ 11.049805] using random host ethernet address [11-20-10.371][ 11.450569] nvethernet 6800000.ethernet: failed to connect PHY [11-20-10.379][ 11.450584] net eno1: ether_open: Cannot attach to PHY (error: -19) [11-20-11.022][ 12.075473] tegra194-pcie 141a0000.pcie: supply vddio-pex-ctl not found, using dummy regulator [11-20-13.308][ 14.363405] tegra194-pcie 141e0000.pcie: supply vddio-pex-ctl not found, using dummy regulator [11-20-13.814] [11-20-13.815]Ubuntu 22.04.5 LTS ma-desktop ttyTCU0 [11-20-13.816] [11-20-15.424]ma-desktop login: [ 16.481125] rt5640 8-001c: Device with ID register 0xffff0000 is not rt5640/39 [11-20-18.798][ 19.853230] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [11-22-12.597]