[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.299-tegra (root@argus-Inspiron-15-3567) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #12 SMP PREEMPT Sat Jan 20 18:05:45 IST 2024 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 145600000 [ 0.000000] OF: fdt: - 235e00000 , 200000 [ 0.000000] OF: fdt: - 236600000 , 200000 [ 0.000000] OF: fdt: - 237000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 1793024 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 523776 pages, LIFO batch:31 [ 0.000000] Normal zone: 19912 pages used for memmap [ 0.000000] Normal zone: 1269248 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1764920 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2372e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x235840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29868(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 6246236K/7172096K available (15422K kernel code, 2972K rwdata, 6764K rodata, 8640K init, 616K bss, 172196K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f90000 ( 15424 KB) [ 0.000000] .rodata : 0xffffff8008f90000 - 0xffffff8009630000 ( 6784 KB) [ 0.000000] .init : 0xffffff8009630000 - 0xffffff8009ea0000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009ea0000 - 0xffffff800a187008 ( 2973 KB) [ 0.000000] .bss : 0xffffff800a187008 - 0xffffff800a22132c ( 617 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf06dc8000 ( 109 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1b7200000 ( 7026 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.001012] Console: colour dummy device 80x25 [ 0.001017] console [tty0] enabled [ 0.001021] bootconsole [uart8250] disabled [ 0.001029] kmemleak: Kernel memory leak detector disabled [ 0.001038] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001046] pid_max: default: 32768 minimum: 301 [ 0.001356] Security Framework initialized [ 0.001513] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.001518] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002152] ftrace: allocating 47268 entries in 185 pages [ 0.128336] sched-energy: Sched-energy-costs installed from DT [ 0.128347] ASID allocator initialised with 65536 entries [ 0.161317] tegra-id: chipid=21817. [ 0.161322] tegra-id: opt_subrevision=1. [ 0.161337] Tegra Revision: A02p SKU: 0x90 CPU Process: 0 SoC Process: 0 [ 0.161344] DTS File Name: /home/argus/l4t-sources/tx2/Linux_for_Tegra/source/public/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3489-1000-a00-00-base.dts [ 0.161349] DTB Build time: [ 0.210696] CPU1: Booted secondary processor [4e0f0030] [ 0.242064] CPU2: Booted secondary processor [4e0f0030] [ 0.273093] CPU3: Booted secondary processor [411fd073] [ 0.305052] CPU4: Booted secondary processor [411fd073] [ 0.337041] CPU5: Booted secondary processor [411fd073] [ 0.337097] Brought up 6 CPUs [ 0.337101] SMP: Total of 6 processors activated. [ 0.337105] CPU features: detected feature: 32-bit EL0 Support [ 0.339481] CPU: All CPU(s) started at EL2 [ 0.339620] alternatives: patching kernel code [ 0.342524] devtmpfs: initialized [ 0.366968] Initilizing CustomIPI irq domain [ 0.367112] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.367121] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.375327] pinctrl core: initialized pinctrl subsystem [ 0.375583] OS set in device tree is not L4T. [ 0.375750] regulator-dummy: no parameters [ 0.375884] Initializing plugin-manager [ 0.375943] Plugin module not found [ 0.375979] Plugin-manager status disabled [ 0.377251] NET: Registered protocol family 16 [ 0.378303] pstore: using zlib compression [ 0.378316] console [pstore-1] enabled [ 0.378319] pstore: Registered ramoops as persistent store backend [ 0.378323] ramoops: attached 0x200000@0x235880000, ecc: 0/0 [ 0.393100] cpuidle: using governor menu [ 0.394118] bpmp: waiting for handshake [ 0.394121] bpmp: handshake completed [ 0.394136] bpmp: synchronizing channels [ 0.394152] bpmp: channels synchronized [ 0.394156] bpmp: mail init ok [ 0.395733] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.395738] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.395742] arm-smmu 12000000.iommu: stage 1 translation [ 0.395745] arm-smmu 12000000.iommu: stage 2 translation [ 0.395748] arm-smmu 12000000.iommu: nested translation [ 0.395754] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.395759] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.395763] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.395767] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.395770] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.397610] vdso: 2 pages (1 code @ ffffff8008f97000, 1 data @ ffffff8009ea4000) [ 0.397624] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.400910] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.401955] Registering BPMP clocks... [ 0.402037] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.402545] Serial: AMBA PL011 UART driver [ 0.403638] tegra_powergate_init: DONE [ 0.403645] DTS File Name: /home/argus/l4t-sources/tx2/Linux_for_Tegra/source/public/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3489-1000-a00-00-base.dts [ 0.403650] DTB Build time: [ 0.405046] Tegra reboot handler registered. [ 0.406272] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.406334] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.406346] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.406349] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.406351] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.406500] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.406511] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.406808] iommu: Adding device 3460000.sdhci to group 0 [ 0.407251] iommu: Adding device 3440000.sdhci to group 1 [ 0.407691] iommu: Adding device 3400000.sdhci to group 2 [ 0.408778] iommu: Adding device 3507000.ahci-sata to group 3 [ 0.408791] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.409222] iommu: Adding device 3160000.i2c to group 4 [ 0.409641] iommu: Adding device c240000.i2c to group 5 [ 0.409954] iommu: Adding device 3180000.i2c to group 6 [ 0.410254] iommu: Adding device 3190000.i2c to group 7 [ 0.410632] iommu: Adding device 31b0000.i2c to group 8 [ 0.410930] iommu: Adding device 31c0000.i2c to group 9 [ 0.411237] iommu: Adding device c250000.i2c to group 10 [ 0.411585] iommu: Adding device 31e0000.i2c to group 11 [ 0.413214] iommu: Adding device 3210000.spi to group 12 [ 0.413527] iommu: Adding device c260000.spi to group 13 [ 0.413828] iommu: Adding device 3240000.spi to group 14 [ 0.414519] iommu: Adding device 3100000.serial to group 15 [ 0.414839] iommu: Adding device 3110000.serial to group 16 [ 0.415142] iommu: Adding device c280000.serial to group 17 [ 0.415439] iommu: Adding device 3130000.serial to group 18 [ 0.416677] iommu: Adding device 2490000.ether_qos to group 19 [ 0.416689] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.417594] iommu: Adding device b000000.rtcpu to group 20 [ 0.419425] iommu: Adding device 13e10000.host1x to group 21 [ 0.419728] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.420012] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.420304] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.420626] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.420926] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.421227] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.421530] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.421826] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.422271] iommu: Adding device 150c0000.nvcsi to group 30 [ 0.422863] iommu: Adding device 15700000.vi to group 31 [ 0.423184] iommu: Adding device 15600000.isp to group 32 [ 0.423390] iommu: Adding device 15200000.dc_common to group 33 [ 0.423907] iommu: Adding device 15210000.nvdisplay to group 34 [ 0.424225] iommu: Adding device 15340000.vic to group 35 [ 0.424425] iommu: Adding device 154c0000.nvenc to group 36 [ 0.424674] iommu: Adding device 15480000.nvdec to group 37 [ 0.425006] iommu: Adding device 15380000.nvjpg to group 38 [ 0.425215] iommu: Adding device 15500000.tsec to group 39 [ 0.425413] iommu: Adding device 15100000.tsecb to group 40 [ 0.426044] iommu: Adding device 15810000.se to group 41 [ 0.426243] iommu: Adding device 15820000.se to group 42 [ 0.426443] iommu: Adding device 15830000.se to group 43 [ 0.426630] iommu: Adding device 15840000.se to group 44 [ 0.427482] iommu: Adding device smmu_test to group 45 [ 0.428059] mc: mapped MMIO address: 0xffffff800a710000 -> 0x2c10000 [ 0.428071] mc: mapped MMIO address: 0xffffff800a730000 -> 0x2c20000 [ 0.428081] mc: mapped MMIO address: 0xffffff800a750000 -> 0x2c30000 [ 0.428091] mc: mapped MMIO address: 0xffffff800a770000 -> 0x2c40000 [ 0.428101] mc: mapped MMIO address: 0xffffff800a790000 -> 0x2c50000 [ 0.428110] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.428120] mc-err: mcerr ops are set to t18x [ 0.428256] dram-ecc: DRAM ECC enabled-MC_ECC_CONTROL:0x0000000d [ 0.428280] dram-ecc: SCE-R5 is booted with Camera FW [ 0.428283] dram-ecc: DRAM ECC interrupts handled in Camera FW [ 0.429386] iommu: Adding device 3530000.xhci to group 46 [ 0.429400] arm-smmu: forcing sodev map for 3530000.xhci [ 0.429828] iommu: Adding device 3550000.xudc to group 47 [ 0.429838] arm-smmu: forcing sodev map for 3550000.xudc [ 0.430550] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.430557] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.430562] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.431160] iommu: Adding device 17000000.gp10b to group 48 [ 0.432118] tegra-reset 5000000.clock: registered 193 resets. [ 0.434102] iommu: Adding device d000000.bpmp to group 49 [ 0.434316] bpmp: ping status is 0 [ 0.434417] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.436369] bpmp d000000.bpmp: probe ok [ 0.439147] iommu: Adding device 2600000.dma to group 50 [ 0.439981] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.440008] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.440038] GPIO line 461 (camera-control-output-low) hogged as output/low [ 0.440063] GPIO line 456 (camera-control-output-low) hogged as output/low [ 0.440230] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.443800] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.445357] iommu: Adding device 10003000.pcie-controller to group 51 [ 0.445372] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.445689] iommu: Adding device sound to group 52 [ 0.446026] iommu: Adding device 3510000.hda to group 53 [ 0.453372] iommu: Adding device c1a0000.aon to group 54 [ 0.453811] vdd-ac-bat: 5000 mV [ 0.455470] vdd-1v8-ap: 1800 mV [ 0.477547] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.480196] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.480386] SCSI subsystem initialized [ 0.480502] libata version 3.00 loaded. [ 0.480688] usbcore: registered new interface driver usbfs [ 0.480719] usbcore: registered new interface driver hub [ 0.480749] usbcore: registered new device driver usb [ 0.483747] GPIO line 241 (touch-rails) hogged as output/high [ 0.484118] GPIO line 242 (touch-rails) hogged as output/high [ 0.484275] gpiochip_setup_dev: registered GPIOs 240 to 255 on device: gpiochip2 (tca9539) [ 0.484923] random: fast init done [ 0.485543] GPIO line 228 (lcd-bias-rails) hogged as output/high [ 0.485691] gpiochip_setup_dev: registered GPIOs 224 to 239 on device: gpiochip3 (tca9539) [ 0.495171] max77620 4-003c: PMIC Version OTP:0x4D and ES:0x1 [ 0.501208] vddio-ddr: at 1125 mV [ 0.505067] avdd_dsi_csi: 1200 mV [ 0.509112] vdd-1v8: 1800 mV [ 0.513062] vdd-3v3-sys: 3300 mV [ 0.513611] max77620-sd4: at 600 mV [ 0.514553] spmic-ldo0: at 1800 mV [ 0.515235] spmic-ldo1: at 800 mV [ 0.517064] vddio-3v3: 3300 mV [ 0.517642] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.521063] vdd-rtc: at 800 mV [ 0.521775] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.525063] spmic-ldo6: at 1500 mV [ 0.529062] vdd-pex-1v00: 1000 mV [ 0.529663] dvdd-pex: 1000 mV [ 0.531760] GPIO line 221 (spmic_gpio_input) hogged as input [ 0.531903] GPIO line 222 (spmic_gpio_input) hogged as input [ 0.532080] gpiochip_setup_dev: registered GPIOs 216 to 223 on device: gpiochip4 (max77620-gpio) [ 0.532257] max77620 4-003c: max77620 probe successful [ 0.532675] media: Linux media interface: v0.10 [ 0.532708] Linux video capture interface: v2.00 [ 0.536176] pps_core: LinuxPPS API ver. 1 registered [ 0.536179] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.536194] PTP clock support registered [ 0.536372] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.536565] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.536610] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.537774] trusty trusty: trusty version: Built: 21:09:01 Jun 8 2023 [ 0.537788] trusty trusty: selected api version: 3 (requested 3) [ 0.538687] Advanced Linux Sound Architecture Driver Initialized. [ 0.539163] Bluetooth: Core ver 2.22 [ 0.539226] NET: Registered protocol family 31 [ 0.539229] Bluetooth: HCI device and connection manager initialized [ 0.539236] Bluetooth: HCI socket layer initialized [ 0.539241] Bluetooth: L2CAP socket layer initialized [ 0.539255] Bluetooth: SCO socket layer initialized [ 0.539971] en-vdd-sd: 3300 mV [ 0.540644] en-vdd-cam: 1800 mV [ 0.544603] vdd-hdmi: 5000 mV [ 0.544893] vdd-usb0-5v: 5000 mV [ 0.545173] vdd-usb1-5v: 5000 mV [ 0.548599] en-vdd-ts-1v8: 1800 mV [ 0.552604] en-vdd-ts-hv-3v3: 3300 mV [ 0.553237] en-vdd-disp-3v3: 3300 mV [ 0.553868] en-mdm-pwr-3v7: 3700 mV [ 0.554504] en-vdd-disp-1v8: 1800 mV [ 0.555167] en-vdd-cam-hv-2v8: 2800 mV [ 0.555853] en-vdd-cam-1v2: 1200 mV [ 0.556539] vdd-fan: 5000 mV [ 0.556850] vdd-3v3: 3300 mV [ 0.557725] dis-vdd-1v2: 1200 mV [ 0.558000] en-vdd-vcm-2v8: 2800 mV [ 0.558669] vdd-usb2-5v: 5000 mV [ 0.558947] vdd-sys-bl: 3300 mV [ 0.559623] en-vdd-sys: 1200 mV [ 0.561664] camchar: rtcpu character device driver loaded [ 0.562144] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.563789] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.564757] clocksource: Switched to clocksource arch_sys_counter [ 0.587829] VFS: Disk quotas dquot_6.6.0 [ 0.587904] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.588148] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.588629] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.588776] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.588780] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.588789] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.588793] nvmap_page_pool_init: Total RAM pages: 1749975 [ 0.588797] nvmap_page_pool_init: nvmap page pool size: 218746 pages (854 MB) [ 0.588846] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.589295] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.591767] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.599176] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.599405] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.599765] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.599839] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.599952] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.600054] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.600198] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.600352] la/ptsa driver initialized. [ 0.600361] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.600363] pre_t19x_iso_plat_init(): max_iso_bw=7680000KB [ 0.600654] NET: Registered protocol family 2 [ 0.600743] IP idents hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.603381] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.603686] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.604276] TCP: Hash tables configured (established 65536 bind 65536) [ 0.604328] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.604445] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.604787] NET: Registered protocol family 1 [ 0.605172] RPC: Registered named UNIX socket transport module. [ 0.605175] RPC: Registered udp transport module. [ 0.605178] RPC: Registered tcp transport module. [ 0.605180] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.605186] PCI: CLS 0 bytes, default 64 [ 0.605302] Trying to unpack rootfs image as initramfs... [ 0.813767] Freeing initrd memory: 7068K [ 0.828587] host1x 13e10000.host1x: initialized [ 0.829915] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.832016] audit: initializing netlink subsys (disabled) [ 0.832042] audit: type=2000 audit(0.720:1): initialized [ 0.832455] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.838922] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.839872] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.840381] 9p: Installing v9fs 9p2000 file system support [ 0.842464] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.842523] io scheduler noop registered [ 0.842731] io scheduler cfq registered (default) [ 0.845885] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.945751] iommu: Adding device aconnect@2a41000:adsp_audio to group 55 [ 0.979139] iommu: Adding device 2993000.adsp to group 56 [ 0.980175] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.982730] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 0.986228] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.987376] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.988428] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.989505] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.991973] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 0.992890] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.993209] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 0.993329] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.993438] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1000000, vi_iso_bw=750000, max_bw=1000000 [ 0.995377] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.995684] tsec 15500000.tsec: initialized [ 0.996607] tsec 15100000.tsecb: initialized [ 0.999056] nvdec 15480000.nvdec: initialized [ 1.003327] falcon 15340000.vic: initialized [ 1.004503] falcon 154c0000.nvenc: initialized [ 1.005690] falcon 15380000.nvjpg: initialized [ 1.007496] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.008816] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.010138] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.011463] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.012847] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.014158] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.015459] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.016781] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.019517] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.019525] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.019550] tegradccommon 15200000.dc_common: dma mapping done [ 1.020251] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=391 [ 1.020404] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 1.020439] generic_infoframe_type: 0x87 [ 1.020506] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.020523] tegradc 15210000.nvdisplay: Display dc.ffffff800abe0000 registered with id=0 [ 1.020904] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.024888] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.024902] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.024969] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 5924200 KB/s [ 1.024972] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 204000000 Hz [ 1.024975] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 207380000 Hz [ 1.025073] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.025076] tegra_cec 3960000.tegra_cec: probed [ 1.025143] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 1.025149] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 1.028023] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.028027] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.032945] tegradc 15210000.nvdisplay: probed [ 1.033294] Console: switching to colour frame buffer device 80x30 [ 1.033314] tegradc 15210000.nvdisplay: fb registered [ 1.033469] gpio tegra-gpio wake21 for gpio=121(P:1) [ 1.036661] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.037357] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.037379] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.037775] kfuse 3830000.kfuse: initialized [ 1.039017] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.041763] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.044070] console [ttyS0] disabled [ 1.044117] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 1.044159] console [ttyS0] enabled [ 1.045471] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 1.046306] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 1.046467] serial-tegra 3130000.serial: RX in PIO mode [ 1.047165] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 1.048113] [drm] Initialized [ 1.054844] brd: module loaded [ 1.058250] loop: module loaded [ 1.058294] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.058362] tegra_profiler: auth: init [ 1.058681] nct1008_nct72 7-004c: starting parse dt [ 1.058783] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 1.058788] nct1008_nct72 7-004c: success parsing dt [ 1.058883] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 1.059190] THERMAL EST: found 3 subdevs [ 1.059194] THERMAL EST num_resources: 0 [ 1.059199] [THERMAL EST subdev 0] [ 1.059203] [THERMAL EST subdev 1] [ 1.059207] [THERMAL EST subdev 2] [ 1.059470] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 1.059473] THERMAL EST: thz register success. [ 1.059564] THERMAL EST: end of probe, return err: 0 [ 1.060167] sd: No Scsi addr parsed to reserve index [ 1.060190] hisi_sas: driver version v1.6 [ 1.063479] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 1.063486] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 1.064180] scsi host0: tegra_ahci [ 1.064549] scsi host1: tegra_ahci [ 1.064688] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 1.064691] ata2: DUMMY [ 1.070243] tun: Universal TUN/TAP device driver, 1.6 [ 1.070247] tun: (C) 1999-2004 Max Krasnyansky [ 1.070920] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.070922] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.070952] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.070955] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.070983] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.070985] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.071016] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.071018] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.076790] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 1.078993] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.079442] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b c7 9d 84 [ 1.079466] Using phyrst_lpmode = 0 from DT [ 1.079815] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 1.081719] PPP generic driver version 2.4.2 [ 1.081828] PPP BSD Compression module registered [ 1.081831] PPP Deflate Compression module registered [ 1.081845] PPP MPPE Compression module registered [ 1.081849] NET: Registered protocol family 24 [ 1.081892] usbcore: registered new interface driver r8152 [ 1.081920] usbcore: registered new interface driver asix [ 1.081947] usbcore: registered new interface driver ax88179_178a [ 1.081973] usbcore: registered new interface driver cdc_ether [ 1.081997] usbcore: registered new interface driver net1080 [ 1.082023] usbcore: registered new interface driver cdc_subset [ 1.082048] usbcore: registered new interface driver zaurus [ 1.082081] usbcore: registered new interface driver cdc_ncm [ 1.082183] VFIO - User Level meta-driver version: 0.3 [ 1.083019] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.083029] ehci-pci: EHCI PCI platform driver [ 1.083057] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.083063] ohci-pci: OHCI PCI platform driver [ 1.083089] ohci-platform: OHCI generic platform driver [ 1.086982] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 1.088559] tegra-xusb 3530000.xhci: extcon 0: ffffffc1ac220800 id [ 1.089320] usbcore: registered new interface driver uas [ 1.089357] usbcore: registered new interface driver usb-storage [ 1.089432] usbcore: registered new interface driver usbserial [ 1.090924] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 1.092940] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.093986] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.094004] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.094310] nct1008_nct72 7-004c: LOC shutdown limit 110 [ 1.094635] nct1008_nct72 7-004c: EXT shutdown limit 110 [ 1.094699] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.094934] mousedev: PS/2 mouse device common for all mice [ 1.094989] usbcore: registered new interface driver xpad [ 1.117029] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.117048] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 1.117735] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 1.117763] tegra-xusb 3530000.xhci: irq 71, io mem 0x03530000 [ 1.117894] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.117900] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.117904] usb usb1: Product: xHCI Host Controller [ 1.117907] usb usb1: Manufacturer: Linux 4.9.299-tegra xhci-hcd [ 1.117910] usb usb1: SerialNumber: 3530000.xhci [ 1.118242] hub 1-0:1.0: USB hub found [ 1.118270] hub 1-0:1.0: 4 ports detected [ 1.118611] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.118619] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 1.118754] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.118759] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.118762] usb usb2: Product: xHCI Host Controller [ 1.118766] usb usb2: Manufacturer: Linux 4.9.299-tegra xhci-hcd [ 1.118770] usb usb2: SerialNumber: 3530000.xhci [ 1.119049] hub 2-0:1.0: USB hub found [ 1.119075] hub 2-0:1.0: 3 ports detected [ 1.119508] Wake76 for irq=199 [ 1.119510] Wake77 for irq=199 [ 1.119512] Wake78 for irq=199 [ 1.119514] Wake79 for irq=199 [ 1.119516] Wake80 for irq=199 [ 1.119518] Wake81 for irq=199 [ 1.119520] Wake82 for irq=199 [ 1.119546] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 1.119551] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 1.130500] nct1008_nct72 7-004c: initial LOC temp: 31000 [ 1.130791] nct1008_nct72 7-004c: initial EXT temp: 43250 [ 1.131367] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 1.131645] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 1.131830] nct1008_nct72 7-004c: nct1008_probe: initialized [ 1.211495] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.212549] Wake73 for irq=42 [ 1.213794] rtc rtc1: alarm rtc device [ 1.213805] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.213820] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.214027] i2c /dev entries driver [ 1.215256] ov5693 2-0036: probing v4l2 sensor no i2c. [ 1.215912] ov5693 2-0036: tegracam sensor driver:ov5693_v2.0.6 [ 1.215920] ov5693 2-0036: TEGRA_CAMERA_CID_GROUP_HOLD contorl is enabled in framework by default, no need to add it in driver [ 1.220882] usb usb2: usb_suspend_both: status 0 [ 1.227320] ov5693 2-0036: Error -22 in control ops setup [ 1.232725] ov5693 2-0036: Failed to init ctrls ov5693 [ 1.237873] ov5693 2-0036: tegra camera subdev registration failed [ 1.244140] ov5693: probe of 2-0036 failed with error -22 [ 1.245009] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 1.249584] parse_throttle_dt_data: Num cap clks = 4 [ 1.249589] parse_throttle_dt_data: clk=mcpu type=1 [ 1.249592] parse_throttle_dt_data: clk=bcpu type=2 [ 1.249598] parse_throttle_dt_data: clk=gpu type=4 [ 1.249601] parse_throttle_dt_data: clk=emc type=3 [ 1.250303] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.250860] FAN dev name: pwm-fan [ 1.250913] FAN:gpio request success. [ 1.250922] FAN: can't find tach_gpio [ 1.250942] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.251122] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 1.251126] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.251689] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.251694] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.251698] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.251702] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.251706] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.251709] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.251713] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.251717] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.251721] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.251725] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.252287] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 1.253281] device-mapper: uevent: version 1.0.3 [ 1.253627] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.253878] CPU EMC frequency mapping table: default setting [ 1.256017] cpufreq: platform driver Initialization: pass [ 1.256673] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.256812] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.257647] sdhci: Secure Digital Host Controller Interface driver [ 1.257648] sdhci: Copyright(c) Pierre Ossman [ 1.257650] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.258767] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.260476] CMDQ: cmdq_platfm_init successful [ 1.261489] CQE: CMD_TIMING bit set for R1B DCMD [ 1.262999] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.267426] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 1.267471] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 1.269111] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 1.270784] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 258 [ 1.274923] tegra-se-nvhost 15810000.se: initialized [ 1.276153] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.276765] tegra-se-nvhost 15820000.se: initialized [ 1.277791] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.278346] tegra-se-nvhost 15830000.se: initialized [ 1.279207] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.279748] tegra-se-nvhost 15840000.se: initialized [ 1.280732] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.281484] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.281625] hidraw: raw HID events driver (C) Jiri Kosina [ 1.282544] usbcore: registered new interface driver usbhid [ 1.282546] usbhid: USB HID core driver [ 1.287245] ashmem: initialized [ 1.289721] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.291894] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.292140] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.292266] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 1.292461] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 1.292538] tegra186-cam-rtcpu b000000.rtcpu: no priority specified, using 99 as default [ 1.293218] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 1.293295] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 1.293340] tegra-capture-ivc ivc-b000000.rtcpu:ivccontrol@52c0: no priority specified, using 99 as default [ 1.293389] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 1.293432] tegra-capture-ivc ivc-b000000.rtcpu:ivccapture@72c0: no priority specified, using 99 as default [ 1.293476] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 1.293583] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 1.293904] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (52) [ 1.293908] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.294352] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 1.296041] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.296479] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.296920] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.297224] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.297964] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.297967] tegra18-bridge 2390000.axi2apb: enabled timeout = 16684000 [ 1.297969] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.298019] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.298021] tegra18-bridge 23a0000.axi2apb: enabled timeout = 16684000 [ 1.298023] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.298073] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.298075] tegra18-bridge 23b0000.axi2apb: enabled timeout = 16684000 [ 1.298078] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.298124] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.298126] tegra18-bridge 23c0000.axi2apb: enabled timeout = 16684000 [ 1.298129] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.298174] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.298176] tegra18-bridge 23d0000.axi2apb: enabled timeout = 16684000 [ 1.298178] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.298224] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.298228] tegra18-bridge 2100000.axip2p: enabled timeout = 16684000 [ 1.298230] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.298278] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.298283] tegra18-bridge 2110000.axip2p: enabled timeout = 16684000 [ 1.298284] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.298338] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.298342] tegra18-bridge 2120000.axip2p: enabled timeout = 16684000 [ 1.298344] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.298389] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.298393] tegra18-bridge 2130000.axip2p: enabled timeout = 16684000 [ 1.298395] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.298439] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.298442] tegra18-bridge 2140000.axip2p: enabled timeout = 16684000 [ 1.298444] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.298488] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.298493] tegra18-bridge 2150000.axip2p: enabled timeout = 16684000 [ 1.298495] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.298541] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.298546] tegra18-bridge 2160000.axip2p: enabled timeout = 16684000 [ 1.298548] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.298594] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.298599] tegra18-bridge 2170000.axip2p: enabled timeout = 16684000 [ 1.298601] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.298646] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.298650] tegra18-bridge 2180000.axip2p: enabled timeout = 16684000 [ 1.298652] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.298700] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.298704] tegra18-bridge 2190000.axip2p: enabled timeout = 16684000 [ 1.298706] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.298765] **** A57 ECC: Enabled [ 1.298767] tegra18_a57_serr_init: on CPU 5 a A57 Core [ 1.298831] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.299266] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.299697] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.299821] denver_knobs_init:MTS_VERSION:66340021 [ 1.302437] nvpmodel: initialized successfully [ 1.303275] trusty-virtio trusty:virtio: initializing [ 1.303383] trusty_ipc virtio0: vring0: va(pa) ffffffc1a9fe0000(0) qsz 32 notifyid 1 [ 1.303391] trusty_ipc virtio0: vring1: va(pa) ffffffc1a9fe2000(0) qsz 32 notifyid 2 [ 1.303463] trusty-virtio trusty:virtio: initializing done [ 1.303558] trusty_ipc virtio0: is online [ 1.304743] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.304746] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.304795] usbcore: registered new interface driver snd-usb-audio [ 1.312278] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.312400] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.320800] gpio tegra-gpio wake71 for gpio=125(P:5) [ 1.320854] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.365493] usb 1-2: new full-speed USB device number 2 using tegra-xusb [ 1.374607] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.379235] ata1: SATA link down (SStatus 0 SControl 300) [ 1.379387] OPE platform probe [ 1.379464] OPE platform probe successful [ 1.387185] usb 1-2: New USB device found, idVendor=05e3, idProduct=0606 [ 1.387190] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.387192] usb 1-2: Product: USB Hub 2.0 [ 1.387195] usb 1-2: Manufacturer: ALCOR [ 1.387823] hub 1-2:1.0: USB hub found [ 1.387929] hub 1-2:1.0: 4 ports detected [ 1.389371] mmc0: periodic cache flush enabled [ 1.389378] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.393742] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 1.397877] mmcblk0boot0: mmc0:0001 032G34 partition 1 8.00 MiB [ 1.402008] mmcblk0boot1: mmc0:0001 032G34 partition 2 8.00 MiB [ 1.406128] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 1.410818] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 1.419642] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.445792] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.445873] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.445942] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.446014] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.446085] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.446159] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.446228] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.446298] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.446367] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.446439] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.446512] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 1.446582] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 1.446654] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 1.446722] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 1.446797] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 1.446869] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 1.446938] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 1.447013] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 1.447081] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 1.447152] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 1.467562] u32 classifier [ 1.467565] Actions configured [ 1.467626] Initializing XFRM netlink socket [ 1.468198] NET: Registered protocol family 10 [ 1.468862] NET: Registered protocol family 17 [ 1.468872] NET: Registered protocol family 15 [ 1.468935] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.468974] Bluetooth: RFCOMM socket layer initialized [ 1.468983] Bluetooth: RFCOMM ver 1.11 [ 1.468987] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.468991] Bluetooth: HIDP socket layer initialized [ 1.469006] 9pnet: Installing 9P2000 support [ 1.469040] Key type dns_resolver registered [ 1.469329] Registered cp15_barrier emulation handler [ 1.469341] Registered setend emulation handler [ 1.470285] registered taskstats version 1 [ 1.473230] isp 15600000.isp: initialized [ 1.477158] nvcsi 150c0000.nvcsi: initialized [ 1.478277] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 1.481386] Wake83 for irq=51 [ 1.481463] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.481538] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 1.481605] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 1.481736] input: gpio-keys as /devices/gpio-keys/input/input2 [ 1.483122] tegra-vi4 15700000.vi: initialized [ 1.484070] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 1.513415] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:10 UTC (946688410) [ 1.514326] mmcblk mmc0:0001: Card claimed for testing. [ 1.532753] usb 1-2: usb_suspend_both: status 0 [ 1.532833] usb usb1: usb_suspend_both: status 0 [ 1.535327] bpmp: mounted debugfs mirror [ 1.536317] bwmgr: missing cdev-type property [ 1.541818] ALSA device list: [ 1.541824] #0: tegra-hda at 0x3518000 irq 384 [ 1.541825] #1: tegra-snd-t186ref-mobile-rt565x [ 1.544495] Freeing unused kernel memory: 8640K [ 1.567119] Root device found: mmcblk0p1 [ 1.568274] Found dev node: /dev/mmcblk0p1 [ 1.675048] EXT4-fs (mmcblk0p1): recovery complete [ 1.675583] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.677637] Rootfs mounted over mmcblk0p1 [ 1.697378] Switching from initrd to actual rootfs [ 1.811570] systemd[1]: System time before build time, advancing clock. [ 1.822735] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.844467] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.853945] cgroup: cgroup2: unknown option "nsdelegate" [ 1.877083] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.877887] systemd[1]: Detected architecture arm64. [ 1.897078] systemd[1]: Set hostname to . [ 1.986451] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 1.986459] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.056744] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 2.056748] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.111287] random: systemd: uninitialized urandom read (16 bytes read) [ 2.112772] systemd[1]: Created slice User and Session Slice. [ 2.112877] random: systemd: uninitialized urandom read (16 bytes read) [ 2.112893] systemd[1]: Reached target Swap. [ 2.112929] random: systemd: uninitialized urandom read (16 bytes read) [ 2.112945] systemd[1]: Reached target Mounting snaps. [ 2.113005] systemd[1]: Reached target Mounted snaps. [ 2.114557] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.166553] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.238761] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.240740] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.303050] systemd-journald[2250]: Received request to flush runtime journal from PID 1 [ 2.656753] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.062764] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.121424] tegra-xusb 3530000.xhci: entering ELPG [ 3.130247] tegra-xusb 3530000.xhci: entering ELPG done [ 3.205080] random: crng init done [ 3.208488] random: 7 urandom warning(s) missed due to ratelimiting [ 3.236424] using random self ethernet address [ 3.242391] using random host ethernet address [ 3.412454] Could not create tracefs 'ov5693_s_stream' directory [ 3.424069] ov5693: module is already loaded [ 3.498801] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.500800] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.705872] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.706234] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.757665] bcpu-throttle-alert cooling device registered. [ 3.758402] mcpu-throttle-alert cooling device registered. [ 3.764342] gpu-throttle-alert cooling device registered. [ 3.796191] Mass Storage Function, version: 2009/09/11 [ 3.796197] LUN: removable file: (no medium) [ 3.801789] using random self ethernet address [ 3.815806] using random host ethernet address [ 3.849763] rndis0: HOST MAC fe:94:90:c6:f6:9c [ 3.850024] rndis0: MAC fe:94:90:c6:f6:9d [ 3.853342] usb0: HOST MAC fe:94:90:c6:f6:9e [ 3.853375] usb0: MAC fe:94:90:c6:f6:9f [ 3.853397] tegra-xudc-new 3550000.xudc: exiting ELPG [ 3.855309] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 3.855333] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 3.856168] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.857484] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.857500] tegra-xudc-new 3550000.xudc: exiting ELPG [ 3.859030] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 3.859047] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.860284] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.861274] l4tbr0: port 1(rndis0) entered blocking state [ 3.861279] l4tbr0: port 1(rndis0) entered disabled state [ 3.862049] device rndis0 entered promiscuous mode [ 3.875336] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 3.880050] l4tbr0: port 2(usb0) entered blocking state [ 3.880055] l4tbr0: port 2(usb0) entered disabled state [ 3.882737] device usb0 entered promiscuous mode [ 3.895486] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 4.166546] CPU1: shutdown [ 4.169765] psci: CPU1 killed (polled 0 ms) [ 4.263570] CPU2: shutdown [ 4.266352] psci: CPU2 killed (polled 0 ms) [ 4.305798] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.385837] gpio tegra-gpio wake18 for gpio=101(M:5) [ 4.388067] net eth0: get_configure_l3v4_filter --> [ 4.388577] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.556423] zram: Added device: zram0 [ 4.560962] zram: Added device: zram1 [ 4.562234] zram: Added device: zram2 [ 4.565602] zram: Added device: zram3 [ 4.592116] zram0: detected capacity change from 0 to 897998848 [ 4.667372] Adding 876948k swap on /dev/zram0. Priority:5 extents:1 across:876948k SS [ 4.671373] zram1: detected capacity change from 0 to 897998848 [ 4.691991] Adding 876948k swap on /dev/zram1. Priority:5 extents:1 across:876948k SS [ 4.705760] zram2: detected capacity change from 0 to 897998848 [ 4.721692] Adding 876948k swap on /dev/zram2. Priority:5 extents:1 across:876948k SS [ 4.728690] zram3: detected capacity change from 0 to 897998848 [ 4.753798] Adding 876948k swap on /dev/zram3. Priority:5 extents:1 across:876948k SS [ 5.258261] Bridge firewalling registered [ 5.303993] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 5.490783] Netfilter messages via NETLINK v0.30. [ 5.502618] ctnetlink v0.93: registering with nfnetlink. [ 5.601719] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 31.817713] spmic-ldo0: disabling [ 31.818291] spmic-ldo1: disabling [ 31.818587] en-vdd-sd: disabling [ 31.818601] en-vdd-cam: disabling [ 31.818616] vdd-usb0-5v: disabling [ 31.818627] vdd-usb1-5v: disabling [ 31.818643] en-vdd-disp-3v3: disabling [ 31.818655] en-mdm-pwr-3v7: disabling [ 31.818665] en-vdd-disp-1v8: disabling [ 31.818676] en-vdd-cam-hv-2v8: disabling [ 31.818688] en-vdd-cam-1v2: disabling [ 31.818699] vdd-fan: disabling [ 31.818710] vdd-3v3: disabling [ 31.818725] en-vdd-vcm-2v8: disabling [ 31.818742] vdd-sys-bl: disabling [ 31.818753] en-vdd-sys: disabling [ 70.308368] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 70.310016] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 125.970621] fuse init (API version 7.26) [ 127.543127] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 127.543138] Bluetooth: BNEP socket layer initialized