[09:32:07.589]收←◆\0
[09:32:07.611]收←◆\0\0\0\0\0\0\0餦0\0\0\0\0?\0\0;\0醆0
[09:32:51.986]收←◆\0
[09:32:52.194]收←◆?
[0041.545] I> MB1 (version: 0.23.0.0-t234-54845784-92215740)
[0041.551] I> t234-A01-0-Silicon (0x12347) Prod
[0041.555] I> Boot-mode : BPMP Diagnostic
[0041.559] I> Emulation: 
[0041.561] I> Entry timestamp: 0x00000000
[0041.565] I> last_boot_error: 0x0
[0041.568] I> BR-BCT: preprod_dev_sign: 0
[0041.572] I> rst_source: 0x0, rst_level: 0x0
[0041.576] I> Task: Crypto init (0x5001c0d9)
[0041.580] I> Task: Secure debug controls (0x5000cb19)
[0041.585] I> Task: strap war set (0x5000b739)
[0041.589] I> strap value(0x4000001) set to 0x4000001
[0041.594] I> Task: Program NV master stream id (0x5000cad1)
[0041.599] I> Task: Verify boot mode (0xd482021)
[0041.605] I> Task: Alias fuses (0x50010749)
[0041.610] E> FUSE_ALIAS: Fuse alias on production fused part is not supported.
[0041.617] I> Task: Print SKU type (0x5000fba9)
[0041.621] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0
[0041.626] I> FUSE_OPT_GPC_DISABLE = 0x00000000
[0041.631] I> FUSE_OPT_TPC_DISABLE = 0x00000001
[0041.635] I> FUSE_OPT_DLA_DISABLE = 0x00000000
[0041.639] I> FUSE_OPT_EMC_DISABLE = 0x00000000
[0041.643] I> FUSE_BOOTROM_PATCH_VERSION = 0x7
[0041.648] I> FUSE_PSCROM_PATCH_VERSION = 0x7
[0041.652] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2
[0041.656] I> FUSE_SKU_INFO_0 = 0xd2
[0041.659] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS 
[0041.663] I> FUSE_PACKAGE_INFO_0 = 0x2
[0041.667] I> SKU: Prod
[0041.669] I> Task: Boost clocks (0x50013db1)
[0041.673] I> Initializing PLLC2 for AXI_CBB.
[0041.677] I> AXI_CBB : src = 35, divisor = 0
[0041.681] I> Task: Voltage monitor (0x50013dbd)
[0041.686] I> VMON: Vmon re-calibration and fine tuning done
[0041.691] I> Task: UPHY init (0x5000da39)
[0041.696] E> UPHY: UPHY lane info table is empty in MB1 BCT.
[0041.701] I> Task: Boot device init (0x50000a3d)
[0041.706] I> Boot_device: RCM
[0041.709] I> USB configuration success
[0041.712] I> Task: TSC init (0x5001ed35)
[0041.716] I> Task: Enable WDT 5th expiry (0x5001f929)
[0041.721] I> Task: Disable WDT globally (0x5001f965)
[0041.726] I> Task: I2C register (0x50000a31)
[0041.730] I> Task: Reset FSI (0x50013db9)
[0041.734] I> Task: Enable clock-mon (0x5001ed25)
[0041.750] I> FMON: Fmon re-programming done

[09:32:52.406]收←◆[0041.754] I> Task: MB1 fixed firewalls (0x5001e55d)
[0041.762] I> Task: Load MB2/Applet/FSKP (0x5000d451)
[0041.766] I> Loading MB2 Applet
[0041.769] I> Scratch RSV109: 0x00000000    active chain: 0
[0041.775] I> Slot: 0
[0041.777] I> Binary[21] block-0 (partition size: 0x50000)
[0041.782] I>  get_binary_info: Binary name: MB2-Applet
[0041.787] I> Size of crypto header is 8192
[0041.791] I> BCH load address is : 0x4004e000
[0041.795] I> Size of crypto header is 8192
[0041.799] I> BCH of MB2-Applet read from storage
[0041.804] I> BCH address is : 0x4004e000
[0041.808] I> MB2-Applet header integrity check is success
[0041.813] I> Binary magic in BCH component 0 is MB2A
[0041.818] I> component binary type is 21
[0041.822] I> Size of crypto header is 8192
[0041.835] I> MB2-Applet binary is read from storage
[0041.841] I> MB2-Applet binary integrity check is success
[0041.846] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b80)
[0041.853] I> Task: Map CCPLEX SHARED carveout (0x5000d521)
[0041.858] I> Task: Prepare MB2 params (0x5000d5dd)
[0041.863] I> MB2-params @ 0x40060000
[0041.867] I> Region(2) already mapped
[0041.870] E> Failed to map carveout: 50
[0041.874] I> BR-BCT Boot Chain Fields
[0041.877] I> 	 u32_non_gpio_select_boot_chain  : 0
[0041.882] I> 	 u32_num_boot_chains             : 0
[0041.887] I> 	 bf_bl_gpio_select_boot_chain_1b : 0
[0041.892] I> Task: Misc NV security settings (0x5000ced5)
[0041.897] I> NVDEC sticky bits programming done
[0041.902] I> Task: Disable/Reload WDT (0x5001f991)
[0041.906] I> Programmed SLCG global override := 0x0
[0041.911] I> MB1: MSS reconfig completed
I> Applet (version: 0.0.0.0-t234-54845784-dee653cf)
I> t234-A01-0-Silicon (0x12347)
I> Emulation: 
I> Entry timestamp: 0xffffffff
I> Task: Pinmux init (0x4000062d)
I> Task: Boot device init (0x400012e5)
I> Applet do storage init
I> Boot_device: QSPI_FLASH instance: 0
I> Qspi clock source : clk_m
I> QSPI-0l initialized successfully

[09:32:52.479]收←◆I> sdmmc DDR50 mode
I> sdmmc bdev is already initialized
E> Unknown device 7
E> Unknown device 8
I> Task: Partition Manager Init (0x40002d1d)
I> Found 57 partitions in QSPI_FLASH (instance 0)
W> Cannot find any partition table for 00000003
 > PARTITION_MANAGER: Failed to publish partition.
I> Found 11 partitions in SDMMC_USER (instance 3)
I> Task: I2C register (0x400006a5)
I> Task: Register exit handlers (0x400005f5)
I> Task: Enter 3p server (0x400018e1)
I> USB configuration success

[09:32:52.543]收←◆I> Populate chip i
[09:32:52.568]收←◆nfo
I> RAM_CODE 0x4000001
I> Populate eeprom info
I> Populate eeprom info for module cvm

[09:32:52.751]收←◆I> dump bct

[09:32:52.910]收←◆I> Rebooting : reboot-recovery


\0
[09:39:20.533]收←◆\0
[09:39:20.726]收←◆?
[0387.622] I> MB1 (version: 0.23.0.0-t234-54845784-92215740)
[0387.627] I> t234-A01-0-Silicon (0x12347) Prod
[0387.631] I> Boot-mode : Coldboot
[0387.635] I> Emulation: 
[0387.637] I> Entry timestamp: 0x00000000
[0387.641] I> last_boot_error: 0x0
[0387.644] I> BR-BCT: preprod_dev_sign: 0
[0387.648] I> rst_source: 0xb, rst_level: 0x1
[0387.652] I> Task: CRC check (0x5001cf71)
[0387.656] I> Skip CRC check as records_integrity fuse is not burned
[0387.662] I> Task: Crypto init (0x5001c0d9)
[0387.666] I> Task: Secure debug controls (0x5000cb19)
[0387.671] I> Task: strap war set (0x5000b739)
[0387.675] I> strap value(0x4000001) set to 0x4000001
[0387.680] I> Task: Initialize SOC Therm (0x5001a509)
[0387.685] I> Task: Program NV master stream id (0x5000cad1)
[0387.690] I> Task: Verify boot mode (0xd482021)
[0387.696] I> Task: Alias fuses (0x50010749)
[0387.701] E> FUSE_ALIAS: Fuse alias on production fused part is not supported.
[0387.708] I> Task: Print SKU type (0x5000fba9)
[0387.712] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0
[0387.717] I> FUSE_OPT_GPC_DISABLE = 0x00000000
[0387.721] I> FUSE_OPT_TPC_DISABLE = 0x00000001
[0387.726] I> FUSE_OPT_DLA_DISABLE = 0x00000000
[0387.730] I> FUSE_OPT_EMC_DISABLE = 0x00000000
[0387.734] I> FUSE_BOOTROM_PATCH_VERSION = 0x7
[0387.738] I> FUSE_PSCROM_PATCH_VERSION = 0x7
[0387.742] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2
[0387.747] I> FUSE_SKU_INFO_0 = 0xd2
[0387.750] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS 
[0387.754] I> FUSE_PACKAGE_INFO_0 = 0x2
[0387.758] I> SKU: Prod
[0387.760] I> Task: Boost clocks (0x50013db1)
[0387.764] I> Initializing PLLC2 for AXI_CBB.
[0387.768] I> AXI_CBB : src = 35, divisor = 0
[0387.772] I> Task: Voltage monitor (0x50013dbd)
[0387.777] I> VMON: Vmon re-calibration and fine tuning done
[0387.782] I> Task: UPHY init (0x5000da39)
[0387.787] E> UPHY: UPHY lane info table is empty in MB1 BCT.
[0387.792] I> Task: Boot device init (0x50000a3d)
[0387.797] I> Boot_device: RCM
[0387.799] I> USB configuration success

[09:39:21.989]收←◆[0388.718] I> Task: TSC init (0x5001ed35)
[0388.722] I> Task: Load membct (0x5001190d)
[0388.726] I> RAM_CODE 0x4000001
[0388.729] I> Loading MEM-BCT to SysRAM
[0388.732] I> Scratch RSV109: 0x00000000    active chain: 0
[0388.738] I> Slot: 0
[0388.740] I> Binary[0] block-0 (partition size: 0x40000)
[0388.745] I>  get_binary_info: Binary name: MEM-BCT-0
[0388.750] I> Size of crypto header is 8192
[0388.754] I> BCH load address is : 0x40050000
[0388.758] I> Size of crypto header is 8192
[0388.762] I> BCH of MEM-BCT-0 read from storage
[0388.767] I> BCH address is : 0x40050000
[0388.771] I> MEM-BCT-0 header integrity check is success
[0388.776] I> Binary magic in BCH component 0 is MEM0
[0388.781] I> component binary type is 0
[0388.787] I> MEM-BCT-0 binary is read from storage
[0388.792] I> MEM-BCT-0 binary integrity check is success
[0388.797] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580)
[0388.803] I> RAM_CODE 0x4000001
[0388.809] I> RAM_CODE 0x4000001
[0388.812] I> Task: Load Page retirement list (0x50011139)
[0388.818] I> Task: SDRAM params override (0x50011b79)
[0388.823] I> Task: Save mem-bct info (0x50014071)
[0388.827] I> Task: Carveout allocate (0x500140d5)
[0388.832] I> ECC region[0]: Start:0x0, End:0x0
[0388.836] I> ECC region[1]: Start:0x0, End:0x0
[0388.840] I> ECC region[2]: Start:0x0, End:0x0
[0388.845] I> ECC region[3]: Start:0x0, End:0x0
[0388.849] I> ECC region[4]: Start:0x0, End:0x0
[0388.853] I> Non-ECC region[0]: Start:0x80000000, End:0x880000000
[0388.859] I> Non-ECC region[1]: Start:0x0, End:0x0
[0388.864] I> Non-ECC region[2]: Start:0x0, End:0x0
[0388.868] I> Non-ECC region[3]: Start:0x0, End:0x0
[0388.873] I> Non-ECC region[4]: Start:0x0, End:0x0
[0388.883] I> allocated(CO:44) base:0x849800000 size:0x36800000 align: 0x100000
[0388.890] I> allocated(CO:46) base:0x820000000 size:0x20000000 align: 0x20000000
[0388.897] I> allocated(CO:31) base:0x840000000 size:0x8000000 align: 0x8000000
[0388.904] I> allocated(CO:39) base:0x81a000000 size:0x6000000 align: 0x200000
[0388.911] I> allocated(CO:20) base:0x818000000 size:0x2000000 align: 0x2000000
[0388.918] I> allocated(CO:24) base:0x816000000 size:0x2000000 align: 0x2000000
[0388.925] I> allocated(CO:28) base:0x814000000 size:0x2000000 align: 0x2000000
[0388.933] I> allocated(CO:29) base:0x812000000 size:0x2000000 align: 0x2000000
[0388.940
[09:39:22.015]收←◆] I> allocated(CO:43) base:0x810000000 size:0x2000000 align: 0x200000
[0388.947] I> allocated(CO:22) base:0x848000000 size:0x1000000 align: 0x1000000
[0388.954] I> allocated(CO:41) base:0x80f000000 size:0x1000000 align: 0x100000
[0388.961] I> allocated(CO:02) base:0x849000000 size:0x800000 align: 0x800000
[0388.968] I> allocated(CO:03) base:0x80e800000 size:0x800000 align: 0x800000
[0388.975] I> allocated(CO:06) base:0x80e000000 size:0x800000 align: 0x800000
[0388.982] I> allocated(CO:10) base:0x80d800000 size:0x800000 align: 0x800000
[0388.988] I> allocated(CO:56) base:0x80d000000 size:0x800000 align: 0x200000
[0388.995] I> allocated(CO:07) base:0x80cc00000 size:0x400000 align: 0x400000
[0389.002] I> allocated(CO:33) base:0x80c800000 size:0x400000 align: 0x200000
[0389.009] I> allocated(CO:47) base:0x80c400000 size:0x400000 align: 0x200000
[0389.016] I> allocated(CO:72) base:0x80c200000 size:0x200000 align: 0x10000
[0389.023] I> allocated(CO:01) base:0x80c100000 size:0x100000 align: 0x100000
[0389.030] I> allocated(CO:04) base:0x80c000000 size:0x100000 align: 0x100000
[0389.037] I> allocated(CO:05) base:0x80bf00000 size:0x100000 align: 0x100000
[0389.044] I> allocated(CO:08) base:0x80be00000 size:0x100000 align: 0x100000
[0389.051] I> allocated(CO:09) base:0x80bd00000 size:0x100000 align: 0x100000
[0389.058] I> allocated(CO:15) base:0x80bc00000 size:0x100000 align: 0x100000
[0389.065] I> allocated(CO:17) base:0x80bb00000 size:0x100000 align: 0x100000
[0389.072] I> allocated(CO:23) base:0x80ba00000 size:0x100000 ali
[09:39:22.235]收←◆gn: 0x100000
[0389.078] I> allocated(CO:27) base:0x80b900000 size:0x100000 align: 0x100000
[0389.085] I> allocated(CO:42) base:0x80b800000 size:0x100000 align: 0x100000
[0389.092] I> allocated(CO:54) base:0x80b780000 size:0x80000 align: 0x80000
[0389.099] I> allocated(CO:26) base:0x80b740000 size:0x40000 align: 0x2000
[0389.106] I> allocated(CO:48) base:0x80b720000 size:0x20000 align: 0x10000
[0389.112] I> allocated(CO:69) base:0x80b700000 size:0x20000 align: 0x10000
[0389.119] I> allocated(CO:34) base:0x80b6f0000 size:0x10000 align: 0x10000
[0389.126] I> allocated(CO:35) base:0x80b6e0000 size:0x10000 align: 0x10000
[0389.133] I> allocated(CO:49) base:0x80b6d0000 size:0x10000 align: 0x10000
[0389.139] I> allocated(CO:50) base:0x80b6c0000 size:0x10000 align: 0x10000
[0389.146] I> allocated(CO:52) base:0x80b6b0000 size:0x10000 align: 0x10000
[0389.153] I> Task: Thermal check (0x5001fba1)
[0389.157] I> max_chip_limit = 115
[0389.160] I> min_chip_limit = -30
[0389.163] I> max temp read = 40
[0389.166] I> min temp read = 40
[0389.169] I> Task: Update FSI SCR with thermal fuse data (0x5001fc3d)
[0389.176] I> Task: Enable WDT 5th expiry (0x5001f929)
[0389.181] I> Task: Disable WDT globally (0x5001f965)
[0389.185] I> Task: I2C register (0x50000a31)
[0389.190] I> Task: Reset FSI (0x50013db9)
[0389.193] I> Task: Pinmux init (0x50013219)
[0389.198] I> Task: Prod config init (0x50013631)
[0389.202] I> Task: Pad voltage init (0x500132a5)
[0389.207] I> Task: Prod init (0x500136d5)
[0389.211] I> Task: Common rail init (0x50013bd1)
[0389.215] W>  Thermal config not found in BCT
[0389.219] W>  Generic i2c config not found in BCT
[0389.224] W>  Platform rail config not found in BCT
[0389.229] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod.
[0389.237] W>  MEMIO rail config not found in BCT
[0389.242] I> Task: Mem clock src (0x500119c5)
[0389.246] I> Task: Misc. board config (0x50013c29)
[0389.251] W>  Platform config no
[09:39:22.265]收←◆t found in BCT
[0389.255] I> Task: SDRAM init (0x500119c9)
[0389.262] I> SDRAM-params @ 0xd485000
[0389.265] I> MSS code-drop: NvBootSdramInit
[0389.269] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 8
[0389.276] I> MSS CAR: Init PLLM
[0389.280] I> MSS CAR: Init PLLHUB
[0389.284] I> Encryption:   MTS: en, TX: dis, VPR: dis, GSC: en
[0389.296] I> mb1_sdram_init Done !
[0389.299] I> SDRAM Size in Total 0x800000000
[0389.304] I> Task: Dram Ecc scrub (0x50011261)
[0389.308] I> Task: DRAM alias check (0x50011b71)

[09:39:22.298]收←◆[0389.339] I> Task: Program NSDRAM carveout (0x50014921)
[0389.346] I> NSDRAM carveout encryption is disabled
[0389.351] I> Program NSDRAM carveout
[0389.356] I> Task: Register checker (0x50011b75)
[0389.365] I> Task: Enable clock-mon (0x5001ed25)
[0389.382] I> FMON: Fmon re-programming d
[09:39:22.371]收←◆one
[0389.386] I> Task: Mapper init (0x5001d451)
[0389.392] I> Task: SC7 Context Init (0x5001f02d)
[0389.398] I> Task: CCPLEX IST init (0x5000d335)
[0389.404] I> Task: CPU WP0 (0x5000c635)
[0389.410] I> Loading MCE
[0389.413] I> Scratch RSV109: 0x00000000    active chain: 0
[0389.419] I> Slot: 0
[0389.421] I> Binary[8] block-0 (partition size: 0x80000)
[0389.428] I>  get_binary_info: Binary name: MCE
[0389.433] I> Size of crypto header is 8192
[0389.438] I> BCH load address is : 0x4003e000
[0389.443] I> Size of crypto header is 8192

[09:39:23.091]收←◆[0390.088] I> BCH of MCE read from storage
[0390.093] I> BCH address is : 0x4003e000
[0390.098] I> MCE header integrity check is success
[0390.104] I> Binary magic in BCH component 0 is MTSM
[0390.109] I> component binary type is 8
[0390.114] I> Size of crypto header is 8192
[0390.125] I> MCE binary is read from storage
[0390.130] I> MCE binary integrity check is success
[0390.136] I> Binary MCE loaded successfully at 0x40000000 (0x2c080)
[0390.144] I> Size of crypto header is 8192
[0390.149] I> Sending WP0 mailbox command to PSC
[0390.160] I> Task: MB1 fixed firewalls (0x5001e55d)

[09:39:23.176]收←◆[0390.180] I> Task: Load bpmp-fw (0x5001e801)
[0390.186] I> Scratch RSV109: 0x00000000    active chain: 0
[0390.192] I> Slot: 0
[0390.194] I> Binary[15] block-0 (partition size: 0x180000)
[0390.201] I>  get_binary_info: Binary name: BPMP_FW
[0390.206] I> Size of crypto header is 8192
[0390.211] I> BCH load address is : 0x807fe000
[0390.217] I> Size of crypto header is 8192
[0390.222] I> BCH of BPMP_FW read from storage
[0390.227] I> BCH address is : 0x807fe000
[0390.233] I> BPMP_FW header integrity check is success
[0390.238] I> Binary magic in BCH component 0 is BPMF
[0390.244] I> component binary type is 15
[0390.248] I> Size of crypto header is 8192

[09:39:23.208]收←◆[0390.290] I> BPMP_FW binary is read from storage

[09:39:23.407]收←◆[0390.297] I> BPMP_FW binary integrity check is success
[0390.303] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfb3c0)
[0390.311] I> Scratch RSV109: 0x00000000    active chain: 0
[0390.317] I> Slot: 0
[0390.320] I> Binary[16] block-251658752 (partition size: 0x400000)
[0390.328] I>  get_binary_info: Binary name: BPMP_FW_DTB
[0390.334] I> Size of crypto header is 8192
[0390.339] I> BCH load address is : 0x807fc000
[0390.345] I> Size of crypto header is 8192
[0390.350] I> BCH of BPMP_FW_DTB read from storage
[0390.355] I> BCH address is : 0x807fc000
[0390.361] I> BPMP_FW_DTB header integrity check is success
[0390.367] I> Binary magic in BCH component 0 is BPMD
[0390.372] I> component binary type is 16
[0390.377] I> Size of crypto header is 8192
[0390.386] I> BPMP_FW_DTB binary is read from storage
[0390.393] I> BPMP_FW_DTB binary integrity check is success
[0390.399] I> Binary BPMP_FW_DTB loaded successfully at 0x807dbbb0 (0x20440)
[0390.408] I> Task: Load psc-fw (0x5001ea0d)
[0390.414] I> Scratch RSV109: 0x00000000    active chain: 0
[0390.420] I> Slot: 0
[0390.423] I> Binary[17] block-0 (partition size: 0xc0000)
[0390.429] I>  get_binary_info: Binary name: PSC_FW
[0390.434] I> Size of crypto header is 8192
[0390.439] I> BCH load address is : 0x80ffe000
[0390.445] I> Size of crypto header is 8192
[0390.450] I> BCH of PSC_FW read from storage
[0390.455] I> BCH address is : 0x80ffe000
[0390.461] I> PSC_FW header integrity check is success
[0390.466] I> Binary magic in BCH component 0 is PFWP
[0390.472] I> component binary type is 17
[0390.476] I> Size of crypto header is 8192

[09:39:23.662]收←◆[0390.499] I> PSC_FW binary is read from storage
[0390.506] I> PSC_FW binary integrity check is success
[0390.512] I> Binary PSC_FW loaded successfully at 0x80000000 (0x7d000)
[0390.520] I> Task: Load nvdec-fw (0x5001ea81)
[0390.526] I> Scratch RSV109: 0x00000000    active chain: 0
[0390.532] I> Slot: 0
[0390.535] I> Binary[7] block-0 (partition size: 0x100000)
[0390.541] I>  get_binary_info: Binary name: NVDEC
[0390.547] I> Size of crypto header is 8192
[0390.551] I> BCH load address is : 0x800fe000
[0390.557] I> Size of crypto header is 8192
[0390.562] I> BCH of NVDEC read from storage
[0390.567] I> BCH address is : 0x800fe000
[0390.573] I> NVDEC header integrity check is success
[0390.578] I> Binary magic in BCH component 0 is NDEC
[0390.584] I> component binary type is 7
[0390.588] I> Size of crypto header is 8192
[0390.601] I> NVDEC binary is read from storage
[0390.607] I> NVDEC binary integrity check is success
[0390.612] I> Binary NVDEC loaded successfully at 0x80000000 (0x35000)
[0390.623] I> Task: Load tsec-fw (0x5001ec6d)
[0390.629] I> TSEC-FW load support not enabled
[0390.634] I> Task: Program misc carveouts (0x5001445d)
[0390.640] I> Program IPC carveouts
[0390.648] I> Task: GPIO interrupt map (0x50013cc5)
[0390.654] I> Task: SC7 context save (0x5001f161)
[0390.660] I> Task: Load MB2/Applet/FSKP (0x5000d451)
[0390.667] I> Loading MB2
[0390.670] I> Scratch RSV109: 0x00000000    active chain: 0
[0390.676] I> Slot: 0
[0390.679] I> Binary[6] block-0 (partition size: 0x80000)
[0390.685] I>  get_binary_info: Binary name: MB2
[0390.690] I> Size of crypto header is 8192
[0390.695] I> BCH load address is : 0x8007e000
[0390.701] I> Size of crypto header is 8192
[0390.706] I> BCH of MB2 read from storage
[0390.710] I> BCH address is : 0x8007e000
[0390.716] I> MB2 header integrity check is success
[0390.721] I> Binary magic in BCH component 0 is MB2B
[0390.727] I> component binary type is 6
[0390.731] I> Size of crypto header is 8192

[09:39:23.777]收←◆[0390.751] I> MB2 binary is read from storage
[0390.757] I> MB2 binary integrity check is success
[0390.763] I> Binary MB2 loaded successfully at 0x80000000 (0x686c0)
[0390.771] I> Task: Map CCPLEX SHARED carveout (0x5000d521)
[0390.779] I> Task: Prepare MB2 params (0x5000d5dd)
[0390.787] I> MB2-params @ 0x40060000
[0390.796] I> BR-BCT Boot Chain Fields
[0390.800] I> 	 u32_non_gpio_select_boot_chain  : 0
[0390.805] I> 	 u32_num_boot_chains             : 2
[0390.810] I> 	 bf_bl_gpio_select_boot_chain_1b : 0
[0390.817] I> Task: Dram ecc test (0x500112cd)
[0390.823] I> Task: Misc NV security settings (0x5000ced5)
[0390.830] I> NVDEC sticky bits programming done
[0390.835] I> Task: Disable/Reload WDT (0x5001f991)
[0390.841] I> Programmed SLCG global override := 0x0
[0390.846] I> MB1: MSS reconfig completed

[09:39:23.860]收←◆I> MB2 (version: 0.0.0.0-t234-54845784-e33bc3dc)
I> t234-A01-0-Silicon (0x12347)
I> Boot-mode : RCM Flash
I> Emulation: 
I> Entry timestamp: 0x174c6383
I> Regular heap: [base:0x40040000, size:0x10000]
I> DMA heap: [base:0x80d000000, size:0x800000]
I> Task: ARI update carveout TZDRAM (0x50001e6c)
I> Task: PSC mailbox init (0x50011ed0)
I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e18)
I> Task: Boot device init (0x50001d60)
I> Boot_device: QSPI_FLASH instance: 0
I> Qspi clock source : pllc_out0
I> QSPI-0l initialized successfully
I> Task: Partition Manager Init (0x50001d5c)
I>
[09:39:23.927]收←◆ Found 57 partitions in QSPI_FLASH (instance 0)
W> Cannot find any partition table for 00000003
 > PARTITION_MANAGER: Failed to publish partition.
I> Found 11 partitions in SDMMC_USER (instance 3)
I> Task: Trigger mailbox for PSC-BL1 exit (0x50011f50)
I> Sending opcode 0x4d420802 to psc
I> Received ACK from psc
I> Task: Enter 3p server (0x50001f04)
I> USB configuration success
I> Populate storage info

[09:39:25.080]收←◆I> Erasing device 3: 0
I> QSPI: Erasing entire device

[09:42:00.104]收←◆I> Writing device 3: 0.

[09:42:00.325]收←◆I> Found 57 partitions in QSPI_FLASH (instance 0)
I> Erasing device 1: 3

[09:42:02.133]收←◆I> Writing device 1: 3.

[09:42:02.169]收←◆I> Writing device 1: 3.
I> Found 11 partitions in SDMMC_USER (instance 3)
I> Writing device 1: 3.
I> Found 11 partitions in SDMMC_USER (instance 3)
I> Writing A_mb1 partition.

[09:42:05.193]收←◆I> Writing A_psc_bl1 partition.

[09:42:06.697]收←◆I> Writing A_nvdec partition.

[09:42:09.481]收←◆I> Writing A_mb2 partition.

[09:42:14.857]收←◆I> Writing A_xusb-fw partition.

[09:42:16.872]收←◆I
[09:42:16.889]收←◆> Writing A_bpmp-fw partition.