�� [0000.065] I> MB1 (version: 1.4.0.1-t234-54845784-08e631ca) [0000.070] I> t234-A01-0-Silicon (0x12347) Prod [0000.074] I> Boot-mode : Coldboot [0000.077] I> Entry timestamp: 0x00000000 [0000.081] I> last_boot_error: 0x0 [0000.084] I> BR-BCT: preprod_dev_sign: 0 [0000.088] I> rst_source: 0x0, rst_level: 0x0 [0000.092] I> Task: SE error check [0000.095] I> Task: Bootchain select WAR set [0000.099] I> Task: Enable SLCG [0000.102] I> Task: CRC check [0000.105] I> Task: Initialize MB2 params [0000.109] I> MB2-params @ 0x40060000 [0000.113] I> Task: Crypto init [0000.116] I> Task: Perform MB1 KAT tests [0000.120] I> Task: NVRNG health check [0000.123] I> NVRNG: Health check success [0000.127] I> Task: MSS Bandwidth limiter settings for iGPU clients [0000.133] I> Task: Enabling and initialization of Bandwidth limiter [0000.139] I> No request to configure MBWT settings for any PC! [0000.145] I> Task: Secure debug controls [0000.148] I> Task: strap war set [0000.152] I> Task: Initialize SOC Therm [0000.155] I> Task: Program NV master stream id [0000.160] I> Task: Verify boot mode [0000.165] I> Task: Alias fuses [0000.169] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.176] I> Task: Print SKU type [0000.179] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0000.184] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0000.189] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0000.193] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.197] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0000.201] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0000.206] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0000.210] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0000.215] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.219] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.223] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.227] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.231] I> FUSE_SKU_INFO_0 = 0xd3 [0000.234] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.239] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.242] I> SKU: Prod [0000.244] I> Task: Boost clocks [0000.247] I> Initializing NAFLL for BPMP_CPU_NIC. [0000.253] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0000.258] I> BPMP NAFLL lock success. [0000.261] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0000.266] I> Initializing PLLC2 for AXI_CBB. [0000.270] I> AXI_CBB : src = 35, divisor = 0 [0000.274] I> Task: Voltage monitor [0000.278] I> VMON: Vmon re-calibration and fine tuning done [0000.283] I> Task: UPHY init [0000.288] I> HSIO UPHY init done [0000.291] W> Skipping GBE UPHY config [0000.294] I> Task: Boot device init [0000.298] I> Boot_device: QSPI_FLASH instance: 0 [0000.302] I> Qspi clock source : pllc_out0 [0000.307] I> QSPI Flash: Macronix 64MB [0000.310] I> QSPI-0l initialized successfully [0000.314] I> Task: TSC init [0000.317] I> Task: Load membct [0000.320] I> RAM_CODE 0x4000401 [0000.323] I> Loading MEMBCT [0000.326] I> Slot: 0 [0000.328] I> Binary[0] block-3840 (partition size: 0x40000) [0000.333] I> Binary name: MEM-BCT-0 [0000.337] I> Size of crypto header is 8192 [0000.341] I> Size of crypto header is 8192 [0000.345] I> strt_pg_num(3840) num_of_pgs(16) read_buf(0x40050000) [0000.351] I> BCH of MEM-BCT-0 read from storage [0000.355] I> BCH address is : 0x40050000 [0000.359] I> MEM-BCT-0 header integrity check is success [0000.364] I> Binary magic in BCH component 0 is MEM0 [0000.369] I> component binary type is 0 [0000.373] I> strt_pg_num(3856) num_of_pgs(115) read_buf(0x40040000) [0000.380] I> MEM-BCT-0 binary is read from storage [0000.384] I> MEM-BCT-0 binary integrity check is success [0000.390] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.396] I> RAM_CODE 0x4000401 [0000.402] I> RAM_CODE 0x4000401 [0000.405] I> Task: Load Page retirement list [0000.409] I> Task: SDRAM params override [0000.413] I> Task: Save mem-bct info [0000.417] I> Task: Carveout allocate [0000.420] I> RCM blob carveout will not be allocated [0000.425] I> Update CCPLEX IST carveout from MB1-BCT [0000.430] I> ECC region[0]: Start:0x0, End:0x0 [0000.434] I> ECC region[1]: Start:0x0, End:0x0 [0000.438] I> ECC region[2]: Start:0x0, End:0x0 [0000.442] I> ECC region[3]: Start:0x0, End:0x0 [0000.447] I> ECC region[4]: Start:0x0, End:0x0 [0000.451] I> Non-ECC region[0]: Start:0x80000000, End:0x480000000 [0000.457] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.462] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.466] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.471] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.482] I> allocated(CO:43) base:0xbe000000 size:0x4000000 align: 0x200000 [0000.488] I> allocated(CO:39) base:0x47de00000 size:0x2200000 align: 0x10000 [0000.495] I> allocated(CO:20) base:0x47a000000 size:0x2000000 align: 0x2000000 [0000.503] I> allocated(CO:24) base:0x478000000 size:0x2000000 align: 0x2000000 [0000.510] I> allocated(CO:28) base:0x476000000 size:0x2000000 align: 0x2000000 [0000.517] I> allocated(CO:22) base:0x47c000000 size:0x1000000 align: 0x1000000 [0000.524] I> allocated(CO:35) base:0x475000000 size:0x1000000 align: 0x100000 [0000.531] I> allocated(CO:02) base:0x47d000000 size:0x800000 align: 0x800000 [0000.538] I> allocated(CO:03) base:0x474800000 size:0x800000 align: 0x800000 [0000.545] I> allocated(CO:06) base:0x474000000 size:0x800000 align: 0x800000 [0000.552] I> allocated(CO:56) base:0x473800000 size:0x800000 align: 0x200000 [0000.559] I> allocated(CO:07) base:0x47d800000 size:0x400000 align: 0x400000 [0000.566] I> allocated(CO:33) base:0x473400000 size:0x400000 align: 0x200000 [0000.573] I> allocated(CO:19) base:0x473180000 size:0x280000 align: 0x10000 [0000.579] I> allocated(CO:23) base:0x47dc00000 size:0x200000 align: 0x200000 [0000.586] I> allocated(CO:01) base:0x473000000 size:0x100000 align: 0x100000 [0000.593] I> allocated(CO:05) base:0x472f00000 size:0x100000 align: 0x100000 [0000.600] I> allocated(CO:08) base:0x472e00000 size:0x100000 align: 0x100000 [0000.607] I> allocated(CO:09) base:0x472d00000 size:0x100000 align: 0x100000 [0000.614] I> allocated(CO:12) base:0x472c00000 size:0x100000 align: 0x100000 [0000.621] I> allocated(CO:15) base:0x472b00000 size:0x100000 align: 0x100000 [0000.628] I> allocated(CO:17) base:0x472a00000 size:0x100000 align: 0x100000 [0000.635] I> allocated(CO:27) base:0x472900000 size:0x100000 align: 0x100000 [0000.642] I> allocated(CO:42) base:0x472800000 size:0x100000 align: 0x100000 [0000.649] I> allocated(CO:54) base:0x473100000 size:0x80000 align: 0x80000 [0000.656] I> allocated(CO:34) base:0x4727f0000 size:0x10000 align: 0x10000 [0000.662] I> allocated(CO:72) base:0x4725f0000 size:0x200000 align: 0x10000 [0000.669] I> allocated(CO:47) base:0x472000000 size:0x400000 align: 0x200000 [0000.676] I> allocated(CO:50) base:0x471e00000 size:0x200000 align: 0x100000 [0000.683] I> allocated(CO:48) base:0x4725d0000 size:0x20000 align: 0x10000 [0000.690] I> allocated(CO:69) base:0x4725b0000 size:0x20000 align: 0x10000 [0000.697] I> allocated(CO:49) base:0x4725a0000 size:0x10000 align: 0x10000 [0000.703] I> NSDRAM base: 0x80000000, end: 0x4725f0000, size: 0x3f25f0000 [0000.710] I> Task: Thermal check [0000.713] I> max_chip_limit = 105 [0000.716] I> min_chip_limit = -28 [0000.719] I> max temp read = 33 [0000.722] I> min temp read = 31 [0000.725] I> Task: Update FSI SCR with thermal fuse data [0000.731] I> Task: Enable WDT 5th expiry [0000.734] I> Task: I2C register [0000.737] I> Task: Set I2C bus freq [0000.741] I> Task: Reset FSI [0000.743] I> Task: Pinmux init [0000.747] I> skipped mmio_addr = 0x9240008 [0000.751] I> skipped mmio_addr = 0x9240000 [0000.754] I> skipped mmio_addr = 0x9240010 [0000.758] I> skipped mmio_addr = 0x9240018 [0000.762] I> skipped mmio_addr = 0x9240020 [0000.766] I> skipped mmio_addr = 0x9240030 [0000.770] I> skipped mmio_addr = 0x9240028 [0000.774] I> skipped mmio_addr = 0x9240038 [0000.778] I> skipped mmio_addr = 0x9240040 [0000.782] I> skipped mmio_addr = 0x9240048 [0000.786] I> skipped mmio_addr = 0x9241000 [0000.790] I> skipped mmio_addr = 0x9241008 [0000.794] I> skipped mmio_addr = 0x9241010 [0000.798] I> skipped mmio_addr = 0x9241018 [0000.802] I> skipped mmio_addr = 0x9241020 [0000.806] I> skipped mmio_addr = 0x9241028 [0000.810] I> skipped mmio_addr = 0x9241030 [0000.814] I> skipped mmio_addr = 0x9241038 [0000.817] I> skipped mmio_addr = 0x9241040 [0000.821] I> skipped mmio_addr = 0x9242000 [0000.825] I> skipped mmio_addr = 0x9242008 [0000.829] I> Task: Prod config init [0000.833] I> Task: Pad voltage init [0000.836] I> Task: Prod init [0000.839] I> Task: Program rst req config reg [0000.843] I> Task: Common rail init [0000.846] I> DONE: Thermal config [0000.850] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.858] I> DONE: SOC rail config [0000.862] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.869] I> DONE: MEMIO rail config [0000.873] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT. [0000.879] I> DONE: GPU rail info [0000.882] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT. [0000.888] I> DONE: CV rail info [0000.891] I> Task: Mem clock src [0000.894] I> Task: Misc. board config [0000.898] I> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.904] I> Task: SDRAM init [0000.906] I> MemoryType: 4 MemBctRevision: 1 [0000.913] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0000.920] I> MSS CAR: Init PLLM [0000.923] I> MSS CAR: Init PLLHUB [0000.928] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.940] I> SDRAM initialized! [0000.943] I> SDRAM Size in Total 0x400000000 [0000.947] I> Task: Dram Ecc scrub [0000.950] I> Task: DRAM alias check [0000.960] I> Task: Program NSDRAM carveout [0000.964] I> NSDRAM carveout encryption is enabled [0000.968] I> Program NSDRAM carveout [0000.972] I> Task: Register checker [0000.975] I> Task: Enable clock-mon [0000.979] I> FMON: Fmon re-programming done [0000.983] I> Task: Mapper init [0000.986] I> Task: SC7 Context Init [0000.990] I> Task: CCPLEX IST init [0000.993] I> Task: CPU WP0 [0000.995] I> Loading MCE [0000.998] I> Slot: 0 [0001.000] I> Binary[8] block-22784 (partition size: 0x80000) [0001.005] I> Binary name: MCE [0001.008] I> Size of crypto header is 8192 [0001.012] I> Size of crypto header is 8192 [0001.016] I> strt_pg_num(22784) num_of_pgs(16) read_buf(0x4003e000) [0001.022] I> BCH of MCE read from storage [0001.026] I> BCH address is : 0x4003e000 [0001.030] I> MCE header integrity check is success [0001.035] I> Binary magic in BCH component 0 is MTSM [0001.040] I> component binary type is 8 [0001.043] I> Size of crypto header is 8192 [0001.047] I> strt_pg_num(22800) num_of_pgs(350) read_buf(0x40000000) [0001.055] I> MCE binary is read from storage [0001.060] I> MCE binary integrity check is success [0001.065] I> Binary MCE loaded successfully at 0x40000000 (0x2baf0) [0001.071] I> Size of crypto header is 8192 [0001.082] I> Size of crypto header is 8192 [0001.086] I> Sending WP0 mailbox command to PSC [0001.095] I> Task: XUSB Powergate [0001.098] I> Skipping powergate XUSB. [0001.101] I> Task: MB1 fixed firewalls [0001.108] W> Firewall readback mismatch [0001.113] I> Task: Load bpmp-fw [0001.116] I> Slot: 0 [0001.118] I> Binary[15] block-9984 (partition size: 0x180000) [0001.123] I> Binary name: BPMP_FW [0001.127] I> Size of crypto header is 8192 [0001.130] I> Size of crypto header is 8192 [0001.134] I> strt_pg_num(9984) num_of_pgs(16) read_buf(0x807fe000) [0001.141] I> BCH of BPMP_FW read from storage [0001.145] I> BCH address is : 0x807fe000 [0001.149] I> BPMP_FW header integrity check is success [0001.154] I> Binary magic in BCH component 0 is BPMF [0001.158] I> component binary type is 15 [0001.162] I> Size of crypto header is 8192 [0001.166] I> strt_pg_num(10000) num_of_pgs(2017) read_buf(0x80000000) [0001.184] I> BPMP_FW binary is read from storage [0001.190] I> BPMP_FW binary integrity check is success [0001.195] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfc080) [0001.202] I> Slot: 0 [0001.204] I> Binary[16] block-13056 (partition size: 0x400000) [0001.209] I> Binary name: BPMP_FW_DTB [0001.213] I> Size of crypto header is 8192 [0001.217] I> Size of crypto header is 8192 [0001.221] I> strt_pg_num(13056) num_of_pgs(16) read_buf(0x807fc000) [0001.227] I> BCH of BPMP_FW_DTB read from storage [0001.232] I> BCH address is : 0x807fc000 [0001.235] I> BPMP_FW_DTB header integrity check is success [0001.241] I> Binary magic in BCH component 0 is BPMD [0001.245] I> component binary type is 16 [0001.249] I> Size of crypto header is 8192 [0001.253] I> strt_pg_num(13072) num_of_pgs(499) read_buf(0x807bd9f0) [0001.262] I> BPMP_FW_DTB binary is read from storage [0001.268] I> BPMP_FW_DTB binary integrity check is success [0001.273] I> Binary BPMP_FW_DTB loaded successfully at 0x807bd9f0 (0x3e540) [0001.280] I> Task: BPMP fw ast config [0001.283] I> Task: Load psc-fw [0001.286] I> Slot: 0 [0001.288] I> Binary[17] block-21248 (partition size: 0xc0000) [0001.294] I> Binary name: PSC_FW [0001.297] I> Size of crypto header is 8192 [0001.301] I> Size of crypto header is 8192 [0001.305] I> strt_pg_num(21248) num_of_pgs(16) read_buf(0x80ffe000) [0001.311] I> BCH of PSC_FW read from storage [0001.315] I> BCH address is : 0x80ffe000 [0001.319] I> PSC_FW header integrity check is success [0001.324] I> Binary magic in BCH component 0 is PFWP [0001.329] I> component binary type is 17 [0001.332] I> Size of crypto header is 8192 [0001.336] I> strt_pg_num(21264) num_of_pgs(591) read_buf(0x80fb4200) [0001.346] I> PSC_FW binary is read from storage [0001.351] I> PSC_FW binary integrity check is success [0001.356] I> Binary PSC_FW loaded successfully at 0x80fb4200 (0x49df0) [0001.362] I> Task: Load nvdec-fw [0001.365] I> Slot: 0 [0001.367] I> Binary[7] block-6400 (partition size: 0x100000) [0001.373] I> Binary name: NVDEC [0001.376] I> Size of crypto header is 8192 [0001.380] I> Size of crypto header is 8192 [0001.384] I> strt_pg_num(6400) num_of_pgs(16) read_buf(0x800fe000) [0001.390] I> BCH of NVDEC read from storage [0001.394] I> BCH address is : 0x800fe000 [0001.398] I> NVDEC header integrity check is success [0001.402] I> Binary magic in BCH component 0 is NDEC [0001.407] I> component binary type is 7 [0001.411] I> Size of crypto header is 8192 [0001.415] I> strt_pg_num(6416) num_of_pgs(560) read_buf(0x80000000) [0001.424] I> NVDEC binary is read from storage [0001.429] I> NVDEC binary integrity check is success [0001.434] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0001.440] I> Size of crypto header is 8192 [0001.451] I> Task: Load tsec-fw [0001.454] I> TSEC-FW load support not enabled [0001.459] I> Task: GPIO interrupt map [0001.462] I> Task: SC7 context save [0001.466] I> Slot: 0 [0001.468] I> Binary[27] block-0 (partition size: 0x100000) [0001.473] I> Binary name: BR_BCT [0001.476] I> Size of crypto header is 8192 [0001.480] I> Size of crypto header is 8192 [0001.484] I> Size of crypto header is 8192 [0001.488] I> strt_pg_num(0) num_of_pgs(16) read_buf(0xa0000000) [0001.494] I> BR_BCT binary is read from storage [0001.498] I> BR_BCT binary integrity check is success [0001.503] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.509] I> Slot: 0 [0001.511] I> Binary[13] block-23808 (partition size: 0x30000) [0001.517] I> Binary name: SC7-FW [0001.520] I> Size of crypto header is 8192 [0001.524] I> Size of crypto header is 8192 [0001.528] I> Size of crypto header is 8192 [0001.532] I> Size of crypto header is 8192 [0001.536] I> strt_pg_num(23808) num_of_pgs(16) read_buf(0xa0002000) [0001.542] I> BCH of SC7-FW read from storage [0001.546] I> BCH address is : 0xa0002000 [0001.550] I> SC7-FW header integrity check is success [0001.555] I> Binary magic in BCH component 0 is WB0B [0001.560] I> component binary type is 13 [0001.564] I> Size of crypto header is 8192 [0001.567] I> strt_pg_num(23824) num_of_pgs(347) read_buf(0xa0004000) [0001.576] I> SC7-FW binary is read from storage [0001.580] I> SC7-FW binary integrity check is success [0001.585] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x2b440) [0001.592] I> Slot: 0 [0001.594] I> Binary[22] block-24192 (partition size: 0x30000) [0001.599] I> Binary name: PSC_RF [0001.602] I> Size of crypto header is 8192 [0001.606] I> Size of crypto header is 8192 [0001.610] I> Size of crypto header is 8192 [0001.614] I> Size of crypto header is 8192 [0001.618] I> strt_pg_num(24192) num_of_pgs(16) read_buf(0xa002f440) [0001.624] I> BCH of PSC_RF read from storage [0001.628] I> BCH address is : 0xa002f440 [0001.632] I> PSC_RF header integrity check is success [0001.637] I> Binary magic in BCH component 0 is PSCR [0001.642] I> component binary type is 22 [0001.646] I> Size of crypto header is 8192 [0001.650] I> strt_pg_num(24208) num_of_pgs(224) read_buf(0xa0031440) [0001.657] I> PSC_RF binary is read from storage [0001.662] I> PSC_RF binary integrity check is success [0001.667] I> Binary PSC_RF loaded successfully at 0xa0031440 (0x1be60) [0001.676] I> Task: Save WP0 payload to SC7 ctx [0001.680] I> Task: Load MB2rf binary to SC7 ctx [0001.685] I> Slot: 0 [0001.687] I> Binary[14] block-24576 (partition size: 0x20000) [0001.692] I> Binary name: MB2_RF [0001.695] I> Size of crypto header is 8192 [0001.699] I> Size of crypto header is 8192 [0001.703] I> Size of crypto header is 8192 [0001.707] I> Size of crypto header is 8192 [0001.711] I> strt_pg_num(24576) num_of_pgs(16) read_buf(0xa00d5d10) [0001.717] I> BCH of MB2_RF read from storage [0001.722] I> BCH address is : 0xa00d5d10 [0001.725] I> MB2_RF header integrity check is success [0001.730] I> Binary magic in BCH component 0 is MB2R [0001.735] I> component binary type is 14 [0001.739] I> Size of crypto header is 8192 [0001.743] I> strt_pg_num(24592) num_of_pgs(223) read_buf(0xa00d7d10) [0001.750] I> MB2_RF binary is read from storage [0001.755] I> MB2_RF binary integrity check is success [0001.760] I> Binary MB2_RF loaded successfully at 0xa00d7d10 (0x1bd90) [0001.766] I> Task: Save fuse alias data to SC7 ctx [0001.771] I> Task: Save PMIC data to SC7 ctx [0001.775] I> Task: Save Pinmux data to SC7 ctx [0001.779] I> Task: Save Pad Voltage data to SC7 ctx [0001.784] I> Task: Save controller prod data to SC7 ctx [0001.789] I> Task: Save prod cfg data to SC7 ctx [0001.794] I> Task: Save I2C bus freq data to SC7 ctx [0001.798] I> Task: Save SOCTherm data to SC7 ctx [0001.803] I> Task: Save FMON data to SC7 ctx [0001.807] I> Task: Save VMON data to SC7 ctx [0001.811] I> Task: Save TZDRAM data to SC7 ctx [0001.815] I> Task: Save GPIO int data to SC7 ctx [0001.820] I> Task: Save clock data to SC7 ctx [0001.824] I> Task: Save debug data to SC7 ctx [0001.828] I> Task: Save MBWT data to SC7 ctx [0001.836] I> SC7 context save done [0001.839] I> Task: Load MB2/Applet/FSKP [0001.843] I> Loading MB2 [0001.845] I> Slot: 0 [0001.848] I> Binary[6] block-8448 (partition size: 0x80000) [0001.853] I> Binary name: MB2 [0001.856] I> Size of crypto header is 8192 [0001.860] I> Size of crypto header is 8192 [0001.864] I> strt_pg_num(8448) num_of_pgs(16) read_buf(0x8007e000) [0001.870] I> BCH of MB2 read from storage [0001.874] I> BCH address is : 0x8007e000 [0001.877] I> MB2 header integrity check is success [0001.882] I> Binary magic in BCH component 0 is MB2B [0001.887] I> component binary type is 6 [0001.891] I> Size of crypto header is 8192 [0001.894] I> strt_pg_num(8464) num_of_pgs(845) read_buf(0x80000000) [0001.905] I> MB2 binary is read from storage [0001.910] I> MB2 binary integrity check is success [0001.915] I> Binary MB2 loaded successfully at 0x80000000 (0x69900) [0001.921] I> Task: Map CCPLEX SHARED carveout [0001.925] I> Task: Prepare MB2 params [0001.929] I> Task: Dram ecc test [0001.932] I> Task: Misc NV security settings [0001.936] I> NVDEC sticky bits programming done [0001.941] I> Successfully powergated NVDEC [0001.945] I> Task: Disable/Reload WDT [0001.948] I> Task: Program misc carveouts [0001.952] I> Program IPC carveouts [0001.956] I> Task: Disable SCPM/POD reset [0001.960] I> SLCG Global override status := 0x0 [0001.964] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-c6a05a9f) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x001e6b61 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x473800000, size:0x800000] I> Task: SE error check I> Task: Crypto init I> Task: MB2 Params integrity check I> Task: ARI update carveout TZDRAM I> Task: Configure OEM set LA/PTSA values I> Task: Check MC errors I> Task: Enable hot-plug capability I> Task: PSC mailbox init I> Task: Enable clock for external modules I> Task: OEM SC7 context save init I> Task: I2C register I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout I> Task: Program CBB PCIE AMAP regions I> Task: Boot device init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: QSPI_FLASH instance: 0 I> Secondary storage device: NVME instance: 4 I> Initializing nvme device instance 4 I> Initializing nvme controller I> tegrabl_pcie_soc_preinit: (4): I> Unpowergate I> PCIE unpowergating successful (PCIEX1A) I> PCIE unpowergating successful (PCIEX4BB) I> tegrabl_pcie_soc_init: (4): I> APPL initialization ... I> PCIe controller-4 link is up I> tegra_pcie_info[4].cfg0_base = 0x36000000 I> tegra_pcie_info[4].cfg1_base = 36020000 I> tegra_pcie_info[4].atu_dma_base = 0x36040000 I> tegra_pcie_bus[4].mem = 0x36200000 I> Scanning busnr: 0 devfn: 0 I> PCIe IDs: 0x229c10de I> PCIe RID_CC: 0x60400a1 I> Scanning busnr: 1 devfn: 0 I> PCIe IDs: 0xa80a144d I> PCIe RID_CC: 0x1080200 I> PCI Config: I/O=0x36100000, Memory=0x36200000 I> MEM64 bar_num=0 bar=0x36200000 I> Number of PCIe devices detected: 2 I> NVME page size: 4096 I> NVMe serial number: S5P2NL0W213504K I> NVMe model number: Samsung SSD 980 PRO 1TB I> NVMe firmware revision: 5B2QGXA7 I> block_count: 1953525168 I> supported_lba: 0 I> block_size_log2: 0x9 I> tegrabl_create_io_queue_cmd: queue size: 2 I> tegrabl_create_io_queue_cmd: queue size: 2 I> nvme device id 000c0004 I> Task: Partition Manager Init I> strt_pg_num(1) num_of_pgs(1) read_buf(0x473808000) I> strt_pg_num(131071) num_of_pgs(1) read_buf(0x473808000) I> strt_pg_num(131039) num_of_pgs(32) read_buf(0x473808200) I> Found 60 partitions in QSPI_FLASH (instance 0) I> Found 15 partitions in NVME (instance 4) I> Task: Pass DRAM ECC PRL Flag to FSI I> Task: Load and authenticate registered FWs I> Task: Load AUXP FWs I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Successfully register PVA FW load task with MB2 loader I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> strt_pg_num(55040) num_of_pgs(16) read_buf(0x40066650) I> strt_pg_num(55056) num_of_pgs(512) read_buf(0x472e00000) I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> strt_pg_num(56192) num_of_pgs(16) read_buf(0x40066650) I> strt_pg_num(56208) num_of_pgs(880) read_buf(0x472a00000) I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x472e00000 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> strt_pg_num(44800) num_of_pgs(16) read_buf(0x40066650) I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x472a00000 I> Successfully register RCE FW context save task with MB2 loader I> dce : oem authentication of header done I> strt_pg_num(44816) num_of_pgs(1) read_buf(0x473800090) I> strt_pg_num(44816) num_of_pgs(8) read_buf(0x473947058) I> dce : meta-blob integrity check is success. I> strt_pg_num(44824) num_of_pgs(512) read_buf(0x473807040) I> strt_pg_num(45336) num_of_pgs(512) read_buf(0x473847040) I> dce : will be decompressed at 0x47a000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> strt_pg_num(45848) num_of_pgs(512) read_buf(0x473887040) I> dce : decompressed to 12056320 bytes I> dce: plain binary integrity check is success I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> strt_pg_num(58240) num_of_pgs(16) read_buf(0x40066650) I> strt_pg_num(58256) num_of_pgs(800) read_buf(0x47d800000) I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x47a000000 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> strt_pg_num(9472) num_of_pgs(16) read_buf(0x40066650) I> strt_pg_num(9488) num_of_pgs(312) read_buf(0x472f00000) I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x47d800000 I> Successfully register APE FW context save task with MB2 loader I> Partition name: A_pva-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-62336 (partition size: 0x40000), name: A_pva-fw I> strt_pg_num(62336) num_of_pgs(16) read_buf(0x40066650) I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x472f00000 I> Successfully register XUSB FW context save task with MB2 loader I> pva-fw : oem authentication of header done I> strt_pg_num(62352) num_of_pgs(1) read_buf(0x473800090) I> strt_pg_num(62352) num_of_pgs(8) read_buf(0x473947058) I> pva-fw : meta-blob integrity check is success. I> strt_pg_num(62360) num_of_pgs(512) read_buf(0x473807040) I> pva-fw : will be decompressed at 0x473180000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> pva-fw : decompressed to 2156512 bytes I> pva-fw: plain binary integrity check is success I> pva-fw: Authentication Finalize Done I> Binary pva-fw loaded successfully at 0x473180000 I> Successfully register PVA FW context save task with MB2 loader I> Task: Check MC errors I> Task: Carveout setup I> Program remaining OEM carveouts I> Task: Enable FSITHERM I> Task: Enable FSI VMON I> Task: Validate FSI Therm readings I> Task: Restore XUSB sec I> Task: Enable FSI SE clock I> Task: Initialize SBSA UART CAR I> Task: Initialize CPUBL Params I> CPUBL-params @ 0x476000000 I> Task: Ratchet update W> Skip ratchet update - OPTIN fuse not set I> Task: Prepare eeprom data I> Task: FSI padctl context save W> Skipping FSI padctl config save: fsi not enabled I> Task: Unpowergate APE W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: Memctrl reconfig pending clients I> Task: OEM firewalls I> OEM firewalls configured I> Task: Powergate APE I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings I> Task: Unhalt AUXPs I> Unhalting SPE.. I> Enabling combined UART ����spe: early_init ����vic initialized ����tsc initialized ����aon lic initialized ����spe: tag is 5243985d1b1eb3f06fac6d36bd7e74ac ����spe: SafeRTOS v8.4 ����spe: init ����scheduler initialized ����aon hsp initialized ����tag initialized ����tcu initialized ����bpmp ipc initialized ����spe: late init ����cpu_nic clock initialized ����apb clock initialized ����pm initialized ����bpmp hsp initialized ����top1 hsp initialized ����ccplex ipc initialized ����spe: start scheduler ���� I> Task: Trigger mailbox for PSC-BL1 exit I> Sending opcode 0x4d420802 to psc I> Received ACK from psc I> Task: Start secure NOR provision I> Skip Secure NOR provisioning I> Task: Trigger load FSI keyblob I> Task: Complete load FSI keyblob I> Task: MB2-PSC_FW Key Manager Init I> Sending opcode OP_PSC_KEY_MANAGER to psc-fw I> Sending opcode 0x4b45594d to psc �� hwwdt_init: WDT boot cfg 0x710010 sts 0x10 bpmp: socket 0 bpmp: base binary md5 is ac83764aab09e08198fdb2c012af5bb1 bpmp: combined binary md5 is e350806227175366b0bd9b0224627752 bpmp: firmware tag is e350806227175366b0bd-ac83764aab0 Write control check for CBB_CENTRAL_CBB_FIREWALL_PWM7_BLF failed, expected value: 00100008 != actual value: 0010000a address: 13a178a8 initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early initialized pm 465 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ��I> Received ACK from psc I> Task: Unhalt FSI I> FSI unhalt skipped I> Task: Unhalt AUXPs ��initialized avfs_clk_platform initialized powergate ��I> SCE unhalt skipped��initialized dvs initialized clk_mach_config initialized suspend initialized strap initialized mce_dbell �� I> Unhalting RCE I> RCE unhalt successful I> Unhalting DCE I> DCE unhalt successful I> APE unhalt skipped I> Task: Load HV/CPUBL I> Task: Load TOS I> Task: Trigger load TSEC leyblob I> Sending opcode 0x53535452 to psc I> Sent opcode to ��[ 3.299496] Camera-FW on t234-rce-safe started TCU early console enabled. ��psc I> Task: Load and authenticate registered FWs I> Partition name: A_cpu-bootloader I> Size of partition: 3670016 I> Binary@ device:3/0 block-24832 (partition siz��initialized emc initialized emc_mrq ��e: 0x380000), name: A_cpu-bootloa��initialized clk_cal initialized uphy_dt initialized uphy_mrq HSIO UPHY reset has been de-asserted 0x0 initialized uphy ��der �� ��I> strt_pg_num(��initialized pg_late initialized pg_mrq_init swdtimer_init: reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ��24832) num_of_pgs(16) read_buf(0x40066650) ��DCE Started DCE_R5_Init MPU enabled DCE_SW_Init ��initialized clk_cal_late initialized noc_late initialized cvc ��I> strt_pg_num(24848) num_of_pgs(��initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/2 have not matching zones 0/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zones 0/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/0 have not matching zones 1/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zones 1/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zones 2/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zones 2/1 initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable pwm3 enable sdmmc4_axicif enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp enable pex1_c6_core��[ 3.519673] Camera-FW on t234-rce-safe ready SHA1=e2238c99 (crt 18.392 ms,�� enable pex2_c7_core enable pex2_c8_core enable pex2_c9_core enable pex2_c10_core enable pex0_c0_core enable pex0_c1_core enable pex0_c2_core enable pex0_c3_core enable pex0_c4_core enable pex1_c5_core initialized clk_mach_post�� total boot 239.641 ms) �� initialized pg_post initialized regulator_post initialized profile initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete ��6800) read_buf(0x4720000��Admin Task Init Admin Task Init complete Print Task Init RM Task Init SHA Task Init Admin Task Started DCE SC7 SHA Enabled RM Task Started RM Task Running Print Task Started Print Task Running SHA Task Started DCE: FW Boot Complete Admin Task Running SHA Task Running ��00) I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os I> strt_pg_num(32000) num_of_pgs(16) read_buf(0x40066650) I> strt_pg_num(32016) num_of_pgs(2560) read_buf(0xc1dc0000) I> MB2-params @ 0x40060000 I> NSDRAM carveout base: 0x80000000, size: 0x3f25f0000 I> cpubl_params: nsdram: carveout: 1, encryption: 1 I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0x472000000 I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0xc1dc0000 I> Relocating OP-TEE dtb from: 0xc1eff0f0 to 0xbe040020, size: 0x2837 I> [0] START: 0x80000000, SIZE: 0x3f25f0000 I> [1] START: 0x476000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> strt_pg_num(44288) num_of_pgs(16) read_buf(0x40066650) I> strt_pg_num(44304) num_of_pgs(8) read_buf(0xbe020000) I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0xbe020000 I> EKB detected (length: 0x410) @ VA:0xbe020000 I> Task: Add cpubl params integrity check I> Added cpubl params digest. I> Task: Prepare TOS params I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0xbe040020 I> NVRNG: Health check success I> NVRNG: Health check success I> Task: OEM SC7 context save I> OEM sc7 context saved I> Task: Disable MSS perf stats I> Task: Program display sticky bits I> Task: Storage device deinit I> Task: SMMU external bypass disable I> Task: SMMU init I> Task: Program GICv3 registers I> Task: Audit firewall settings I> Task: Bootchain failure check I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> Task: Burn RESERVED_ODM0 fuse I> Task: Lock fusing I> Task: Clear dec source key I> MB2 finished ��NOTICE: BL31: v2.8(release):8a7f432be NOTICE: BL31: Built : 10:30:22, Nov 30 2023 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.22 (gcc version 11.3.0 (Buildroot 2022.08)) #2 Thu Nov 30 18:39:35 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Test OEM keys are being used. This is insecure for shipping products! I/TC: Primary CPU switching to normal world boot �� Jetson UEFI firmware (version 36.2.0-gcid-34956989 built on 2023-11-30T18:35:35+00:00) ��I/TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled �� ��[ 5.746969] Camera-FW on t234-rce-safe started TCU early console enabled. �� ��[ 5.794283] Camera-FW on t234-rce-safe ready SHA1=e2238c99 (crt 0.893 ms, total boot 48.258 ms) �� ��E/TC:?? 00 get_rpc_alloc_res:645 RPC allocation failed. Non-secure world result: ret=0xffff0000 ret_origin=0 E/LD: init_elf:486 sys_open_ta_bin(bc50d971-d4c9-42c4-82cb-343fb7f37896) E/TC:?? 00 ldelf_init_with_ldelf:131 ldelf failed with res: 0xffff000c �� Jetson System firmware version 36.2.0-gcid-34956989 date 2023-11-30T18:35:35+00: 00 ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ** WARNING: Test Key is used. ** L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services... ��debugfs initialized ��I/TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled ��[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.15.131-rt-tegra (roberthilton@rdevlnx) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2022.08) 11.3.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT_RT Sat Feb 10 14:31:30 EST 2024 () [ 0.000000] Machine model: NVIDIA Jetson Orin NX Engineering Reference Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x46da6f318 SMBIOS=0xffff0000 SMBIOS 3.0=0x46d490000 MEMATTR=0x467687018 ESRT=0x467574198 RNG=0x45b210018 MEMRESERVE=0x45bce7c18 [ 0.000000] random: crng init done [ 0.000000] secureboot: Secure boot disabled [ 0.000000] esrt: Reserving ESRT space from 0x0000000467574198 to 0x00000004675741d0. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000044b000000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x0000000477ffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x4703037c0-0x470305fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000477ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bdffffff] [ 0.000000] node 0: [mem 0x00000000c2000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000045e477fff] [ 0.000000] node 0: [mem 0x000000045e478000-0x000000045e64bfff] [ 0.000000] node 0: [mem 0x000000045e64c000-0x000000046bb2ffff] [ 0.000000] node 0: [mem 0x000000046bb30000-0x000000046da6ffff] [ 0.000000] node 0: [mem 0x000000046da70000-0x0000000471dfffff] [ 0.000000] node 0: [mem 0x0000000471e00000-0x0000000471ffffff] [ 0.000000] node 0: [mem 0x0000000472000000-0x000000047259ffff] [ 0.000000] node 0: [mem 0x0000000476000000-0x0000000477ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000477ffffff] [ 0.000000] On node 0, zone DMA: 16384 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 14944 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 28 pages/cpu s77744 r8192 d28752 u114688 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Address authentication (architected algorithm) [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Hardware dirty bit management [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4065184 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/nvme0n1p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 nospectre_bhb video=efifb:off console=tty0 bl_prof_dataptr=2031616@0x471E10000 bl_prof_ro_ptr=65536@0x471E00000 [ 0.000000] Unknown kernel command line parameters "mminit_loglevel=4 fbcon=map:0 bl_prof_dataptr=2031616@0x471E10000 bl_prof_ro_ptr=65536@0x471E00000", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfe0000-0x00000000fffe0000] (64MB) [ 0.000000] Memory: 15752856K/16520832K available (18496K kernel code, 4034K rwdata, 9768K rodata, 7488K init, 549K bss, 505832K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000000] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000327] Console: colour dummy device 80x25 [ 0.000333] printk: console [tty0] enabled [ 0.000374] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000379] pid_max: default: 32768 minimum: 301 [ 0.000413] LSM: Security Framework initializing [ 0.000428] Yama: becoming mindful. [ 0.000442] SELinux: Initializing. [ 0.000523] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000560] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.001438] rcu: Hierarchical SRCU implementation. [ 0.003458] Tegra Revision: A01 SKU: 211 CPU Process: 0 SoC Process: 0 [ 0.003694] Remapping and enabling EFI services. [ 0.004489] smp: Bringing up secondary CPUs ... [ 0.004893] Detected PIPT I-cache on CPU1 [ 0.004920] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.004940] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.005315] Detected PIPT I-cache on CPU2 [ 0.005327] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.005340] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.005697] Detected PIPT I-cache on CPU3 [ 0.005706] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.005717] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.008045] Detected PIPT I-cache on CPU4 [ 0.008067] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.008087] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.008494] Detected PIPT I-cache on CPU5 [ 0.008503] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.008514] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.008886] Detected PIPT I-cache on CPU6 [ 0.008896] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.008907] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.009283] Detected PIPT I-cache on CPU7 [ 0.009293] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.009304] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.009353] smp: Brought up 1 node, 8 CPUs [ 0.009357] SMP: Total of 8 processors activated. [ 0.009359] CPU features: detected: 32-bit EL0 Support [ 0.009360] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.009361] CPU features: detected: Common not Private translations [ 0.009363] CPU features: detected: CRC32 instructions [ 0.009363] CPU features: detected: Data cache clean to Point of Persistence [ 0.009365] CPU features: detected: Generic authentication (architected algorithm) [ 0.009366] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.009367] CPU features: detected: LSE atomic instructions [ 0.009368] CPU features: detected: Privileged Access Never [ 0.009368] CPU features: detected: RAS Extension Support [ 0.009369] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.022268] spectre-bhb mitigation disabled by command line option [ 0.022268] spectre-bhb mitigation disabled by command line option [ 0.034099] CPU: All CPU(s) started at EL2 [ 0.035685] devtmpfs: initialized [ 0.051335] KASLR enabled [ 0.051441] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.051451] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.053531] pinctrl core: initialized pinctrl subsystem [ 0.054136] SMBIOS 3.6.0 present. [ 0.054145] DMI: Unknown NVIDIA Jetson Orin NX Engineering Reference Developer Kit/NVIDIA Jetson Orin NX Engineering Reference Developer Kit, BI [ 0.054442] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.055848] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.055961] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.056076] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.056112] audit: initializing netlink subsys (disabled) [ 0.056209] audit: type=2000 audit(0.056:1): state=initialized audit_enabled=0 res=1 [ 0.057129] thermal_sys: Registered thermal governor 'step_wise' [ 0.057131] thermal_sys: Registered thermal governor 'user_space' [ 0.057133] thermal_sys: Registered thermal governor 'power_allocator' [ 0.059277] cpuidle: using governor menu [ 0.059472] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.059558] ASID allocator initialised with 32768 entries [ 0.060693] Serial: AMBA PL011 UART driver [ 0.069347] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 117, base_baud = 0) is a SBSA [ 0.079591] platform bpmp: Fixing up cyclic dependency with 2c60000.external-memory-controller [ 0.087856] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.087861] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.087863] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.087864] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.088460] cryptd: max_cpu_qlen set to 1000 [ 0.089756] ACPI: Interpreter disabled. [ 0.090738] VDD_1V8_AO: supplied by VDD_5V0_SYS [ 0.090843] VDD_3V3_AO: supplied by VDD_5V0_SYS [ 0.091092] VDD_AV10_HUB: supplied by VDD_5V0_SYS [ 0.091389] iommu: Default domain type: Translated [ 0.091391] iommu: DMA domain TLB invalidation policy: strict mode [ 0.091617] SCSI subsystem initialized [ 0.091730] vgaarb: loaded [ 0.091834] usbcore: registered new interface driver usbfs [ 0.091850] usbcore: registered new interface driver hub [ 0.091863] usbcore: registered new device driver usb [ 0.092223] pps_core: LinuxPPS API ver. 1 registered [ 0.092226] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.092232] PTP clock support registered [ 0.092289] EDAC MC: Ver: 3.0.0 [ 0.092932] Registered efivars operations [ 0.093440] FPGA manager framework [ 0.093486] Advanced Linux Sound Architecture Driver Initialized. [ 0.094007] clocksource: Switched to clocksource arch_sys_counter [ 0.117167] VFS: Disk quotas dquot_6.6.0 [ 0.117211] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.117357] pnp: PnP ACPI: disabled [ 0.120211] NET: Registered PF_INET protocol family [ 0.120713] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.123049] tcp_listen_portaddr_hash hash table entries: 8192 (order: 6, 393216 bytes, linear) [ 0.123267] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.123277] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.123433] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes, linear) [ 0.124842] TCP: Hash tables configured (established 131072 bind 65536) [ 0.124976] UDP hash table entries: 8192 (order: 7, 786432 bytes, linear) [ 0.125427] UDP-Lite hash table entries: 8192 (order: 7, 786432 bytes, linear) [ 0.125981] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.126302] RPC: Registered named UNIX socket transport module. [ 0.126305] RPC: Registered udp transport module. [ 0.126306] RPC: Registered tcp transport module. [ 0.126306] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.126315] PCI: CLS 0 bytes, default 64 [ 0.126462] Unpacking initramfs... [ 0.142167] hw perfevents: enabled with armv8_cortex_a78 PMU driver, 7 counters available [ 0.144317] Initialise system trusted keyrings [ 0.144394] workingset: timestamp_bits=42 max_order=22 bucket_order=0 [ 0.147819] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.148132] NFS: Registering the id_resolver key type [ 0.148150] Key type id_resolver registered [ 0.148152] Key type id_legacy registered [ 0.148197] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.148206] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.148221] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.148407] 9p: Installing v9fs 9p2000 file system support [ 0.160091] NET: Registered PF_ALG protocol family [ 0.160097] Key type asymmetric registered [ 0.160100] Asymmetric key parser 'x509' registered [ 0.160146] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.160151] io scheduler mq-deadline registered [ 0.160153] io scheduler kyber registered [ 0.169608] EINJ: ACPI disabled. [ 0.183301] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.185360] SuperH (H)SCI(F) driver initialized [ 0.185762] msm_serial: driver initialized [ 0.186549] printk: console [ttyTCU0] enabled [ 0.187604] arm-smmu 8000000.iommu: probing hardware configuration... [ 0.187611] arm-smmu 8000000.iommu: SMMUv2 with: [ 0.187616] arm-smmu 8000000.iommu: stage 1 translation [ 0.187618] arm-smmu 8000000.iommu: stage 2 translation [ 0.187620] arm-smmu 8000000.iommu: nested translation [ 0.187628] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 0.187635] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 0.187656] arm-smmu 8000000.iommu: Supported page sizes: 0x61311000 [ 0.187659] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.187663] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.188997] arm-smmu 10000000.iommu: probing hardware configuration... [ 0.189000] arm-smmu 10000000.iommu: SMMUv2 with: [ 0.189002] arm-smmu 10000000.iommu: stage 1 translation [ 0.189003] arm-smmu 10000000.iommu: stage 2 translation [ 0.189003] arm-smmu 10000000.iommu: nested translation [ 0.189007] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 0.189011] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 0.189017] arm-smmu 10000000.iommu: Supported page sizes: 0x61311000 [ 0.189018] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.189019] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.189566] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.189569] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.189571] arm-smmu 12000000.iommu: stage 1 translation [ 0.189572] arm-smmu 12000000.iommu: stage 2 translation [ 0.189573] arm-smmu 12000000.iommu: nested translation [ 0.189577] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 0.189579] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 0.189592] arm-smmu 12000000.iommu: Supported page sizes: 0x61311000 [ 0.189593] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.189594] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.207579] loop: module loaded [ 0.208837] megasas: 07.717.02.00-rc1 [ 0.213635] tun: Universal TUN/TAP device driver, 1.6 [ 0.214369] thunder_xcv, ver 1.0 [ 0.214403] thunder_bgx, ver 1.0 [ 0.214427] nicpf, ver 1.0 [ 0.215362] hclge is initializing [ 0.215397] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.215404] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.215461] e1000: Intel(R) PRO/1000 Network Driver [ 0.215466] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.215499] e1000e: Intel(R) PRO/1000 Network Driver [ 0.215503] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.215550] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.215557] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.215576] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.215582] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.215839] sky2: driver version 1.30 [ 0.216538] VFIO - User Level meta-driver version: 0.3 [ 0.218182] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.218191] ehci-pci: EHCI PCI platform driver [ 0.218220] ehci-platform: EHCI generic platform driver [ 0.218304] ehci-orion: EHCI orion driver [ 0.218371] ehci-exynos: EHCI Exynos driver [ 0.218431] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.218471] ohci-pci: OHCI PCI platform driver [ 0.218497] ohci-platform: OHCI generic platform driver [ 0.218588] ohci-exynos: OHCI Exynos driver [ 0.219034] usbcore: registered new interface driver usb-storage [ 0.221051] i2c_dev: i2c /dev entries driver [ 0.222432] pps pps0: new PPS source ktimer [ 0.222440] pps pps0: ktimer PPS source registered [ 0.222450] pps_ldisc: PPS line discipline registered [ 0.224743] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 0.227302] sdhci: Secure Digital Host Controller Interface driver [ 0.227307] sdhci: Copyright(c) Pierre Ossman [ 0.227789] Synopsys Designware Multimedia Card Interface Driver [ 0.228435] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.230677] SMCCC: SOC_ID: ID = jep106:036b:0234 Revision = 0x00000401 [ 0.231227] tegra-bpmp bpmp: Adding to iommu group 0 [ 0.233034] tegra-bpmp bpmp: firmware: e350806227175366b0bd-ac83764aab0 [ 0.309467] Freeing initrd memory: 10976K [ 3.301379] clocksource: tsc: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 3.301404] clocksource: osc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 49772407460 ns [ 3.301407] clocksource: usec: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 3.302156] usbcore: registered new interface driver usbhid [ 3.302163] usbhid: USB HID core driver [ 3.307838] optee: probing for conduit method. [ 3.307887] optee: revision 3.22 (1b7f2993) [ 3.368517] optee: dynamic shared memory is enabled [ 3.368797] optee: initialized driver [ 3.372179] usbcore: registered new interface driver snd-usb-audio [ 3.374305] NET: Registered PF_PACKET protocol family [ 3.374582] 9pnet: Installing 9P2000 support [ 3.374694] Key type dns_resolver registered [ 3.376275] printk: console [tty0]: printing thread started [ 3.376803] printk: console [ttyTCU0]: printing thread started [ 3.376971] Loading compiled-in X.509 certificates [ 3.392826] Loaded X.509 cert 'Build time autogenerated kernel key: 29a2ebdf3f8c89ea67fded1c7d46fc7512311f4b' [ 3.469534] simple-framebuffer chosen:framebuffer: framebuffer at 0x47de00000, 0x1680000 bytes [ 3.469556] simple-framebuffer chosen:framebuffer: format=x8r8g8b8, mode=2560x1440x32, linelength=16384 [ 3.473901] simple-framebuffer chosen:framebuffer: fb0: simplefb registered! [ 3.475064] tegra-gpcdma 2600000.dma-controller: Adding to iommu group 1 [ 3.478901] tegra-gpcdma 2600000.dma-controller: GPC DMA driver register 31 channels [ 3.480305] serial-tegra 3100000.serial: RX in PIO mode [ 3.480311] serial-tegra 3100000.serial: TX in PIO mode [ 3.480382] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 112, base_baud = 0) is a TEGRA_UART [ 3.480942] serial-tegra 3140000.serial: RX in PIO mode [ 3.480946] serial-tegra 3140000.serial: TX in PIO mode [ 3.480981] 3140000.serial: ttyTHS2 at MMIO 0x3140000 (irq = 113, base_baud = 0) is a TEGRA_UART [ 3.483499] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.483507] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.483991] tegra-i2c 3160000.i2c: Adding to iommu group 1 [ 3.488262] tegra-i2c 3180000.i2c: Adding to iommu group 1 [ 3.495378] tegra-i2c 31b0000.i2c: Adding to iommu group 1 [ 3.502078] tegra-i2c c240000.i2c: Adding to iommu group 1 [ 3.508477] i2c 1-0025: Fixing up cyclic dependency with 3520000.padctl [ 3.509315] tegra-i2c c250000.i2c: Adding to iommu group 1 [ 3.540506] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1966000 KHz, changing to: 1984000 KHz [ 3.543590] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 1985000 KHz, changing to: 1984000 KHz [ 3.546596] tegra-xusb 3610000.usb: Adding to iommu group 2 [ 3.564957] tegra-xusb 3610000.usb: Firmware timestamp: 2023-02-10 03:48:10 UTC [ 3.564969] tegra-xusb 3610000.usb: xHCI Host Controller [ 3.564991] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 1 [ 3.565778] tegra-xusb 3610000.usb: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000010810 [ 3.566176] tegra-xusb 3610000.usb: irq 123, io mem 0x03610000 [ 3.566347] tegra-xusb 3610000.usb: xHCI Host Controller [ 3.566353] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 2 [ 3.566360] tegra-xusb 3610000.usb: Host supports USB 3.1 Enhanced SuperSpeed [ 3.566961] hub 1-0:1.0: USB hub found [ 3.566978] hub 1-0:1.0: 4 ports detected [ 3.567379] hub 2-0:1.0: USB hub found [ 3.567391] hub 2-0:1.0: 4 ports detected [ 3.570119] irq: IRQ221: trimming hierarchy from :bus@0:pmc@c360000 [ 3.570309] irq: IRQ222: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [ 3.570637] irq: IRQ223: trimming hierarchy from :bus@0:pmc@c360000 [ 3.571513] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 3.612551] ALSA device list: [ 3.612555] No soundcards found. [ 3.642083] Freeing unused kernel memory: 7488K [ 3.642152] Run /init as init process [ 3.657120] Checking overlayfs setting... [ 3.673434] Overlayfs is disabled... [ 3.679235] Root device found: nvme0n1p1 [ 3.902016] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 4.056826] hub 1-2:1.0: USB hub found [ 4.057285] hub 1-2:1.0: 4 ports detected [ 4.182274] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using tegra-xusb [ 4.241074] hub 2-1:1.0: USB hub found [ 4.242283] hub 2-1:1.0: 4 ports detected [ 14.077886] ERROR: nvme0n1p1 not found �� [0032.513] I> MB1 (version: 1.4.0.1-t234-54845784-08e631ca) [0032.519] I> t234-A01-0-Silicon (0x12347) Prod [0032.523] I> Boot-mode : BPMP Diagnostic [0032.527] I> Entry timestamp: 0x00000000 [0032.530] I> last_boot_error: 0x0 [0032.534] I> BR-BCT: preprod_dev_sign: 0 [0032.537] I> rst_source: 0x0, rst_level: 0x0 [0032.542] I> Task: Initialize MB2 params [0032.546] I> MB2-params @ 0x40060000 [0032.549] I> Task: Crypto init [0032.552] I> Task: Perform MB1 KAT tests [0032.556] I> Task: NVRNG health check [0032.560] I> NVRNG: Health check success [0032.563] I> Task: Secure debug controls [0032.567] I> Task: strap war set [0032.570] I> Task: Program NV master stream id [0032.575] I> Task: Verify boot mode [0032.580] I> Task: Alias fuses [0032.584] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0032.591] I> Task: Print SKU type [0032.594] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0032.599] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0032.604] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0032.608] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0032.612] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0032.616] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0032.621] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0032.625] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0032.630] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0032.634] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0032.638] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0032.642] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0032.646] I> FUSE_SKU_INFO_0 = 0xd3 [0032.650] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0032.654] I> FUSE_PACKAGE_INFO_0 = 0x2 [0032.657] I> SKU: Prod [0032.660] I> Task: Boost clocks [0032.663] I> Initializing NAFLL for BPMP_CPU_NIC. [0032.668] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0032.673] I> BPMP NAFLL lock success. [0032.677] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0032.681] I> Initializing PLLC2 for AXI_CBB. [0032.685] I> AXI_CBB : src = 35, divisor = 0 [0032.690] I> Task: Voltage monitor [0032.693] I> VMON: Vmon re-calibration and fine tuning done [0032.698] I> Task: UPHY init [0032.701] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0032.707] I> Task: Boot device init [0032.710] I> Boot_device: RCM [0032.713] I> USB configuration success [0032.717] I> Task: TSC init [0032.720] I> Task: Enable WDT 5th expiry [0032.724] I> Task: I2C register [0032.727] I> Task: Set I2C bus freq [0032.730] I> Task: Reset FSI [0032.733] I> Task: Enable clock-mon [0032.737] I> FMON: Fmon re-programming done [0032.741] I> Task: Mapper init [0032.744] I> Task: MB1 fixed firewalls [0032.750] W> Firewall readback mismatch [0032.755] I> Task: Load MB2/Applet/FSKP [0032.759] I> Loading MB2 Applet [0032.762] I> Slot: 0 [0032.764] I> Binary[21] block-352321536 (partition size: 0x50000) [0032.770] I> Binary name: MB2-Applet [0032.773] I> Size of crypto header is 8192 [0032.777] I> Size of crypto header is 8192 [0032.781] I> BCH of MB2-Applet read from storage [0032.786] I> BCH address is : 0x4004e000 [0032.790] I> MB2-Applet header integrity check is success [0032.795] I> Binary magic in BCH component 0 is MB2A [0032.800] I> component binary type is 21 [0032.804] I> Size of crypto header is 8192 [0032.821] I> MB2-Applet binary is read from storage [0032.827] I> MB2-Applet binary integrity check is success [0032.832] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x42440) [0032.839] I> Task: Prepare MB2 params [0032.843] I> Task: Misc NV security settings [0032.847] I> NVDEC sticky bits programming done [0032.851] I> Successfully powergated NVDEC [0032.855] I> Task: Disable/Reload WDT [0032.859] I> Task: Program misc carveouts [0032.863] I> Task: Disable SCPM/POD reset [0032.866] I> SLCG Global override status := 0x0 [0032.871] I> MB1: MSS reconfig completed [0032.875] W> Firewall readback mismatch [0032.878] W> Firewall readback mismatch [0032.882] W> Firewall readback mismatch [0032.886] W> Firewall readback mismatch [0032.889] W> Firewall readback mismatch [0032.893] W> Firewall readback mismatch [0032.897] W> Firewall readback mismatch [0032.901] W> Firewall readback mismatch [0032.904] W> Firewall readback mismatch [0032.908] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-b648c465) I> t234-A01-0-Silicon (0x12347) Prod I> Emulation: I> Entry timestamp: 0x00000000 I> Task: Pinmux init I> Task: Crypto init I> Task: Boot device init I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: SDMMC_BOOT instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 0-3 I> Secondary storage device: SDMMC_USER instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 1-3 I> Secondary storage device: QSPI_FLASH instance: 0 I> Task: I2C register I> Task: Register exit handlers I> Task: Enter 3p server I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000001 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> strt_pg_num(0) num_of_pgs(16) read_buf(0x40071738) I> BRBCT integrity check is success I> Validation passed for 1 copy of BRBCT @ 0 I> Rebooting : reboot-recovery �� [0043.397] I> MB1 (version: 1.4.0.1-t234-54845784-08e631ca) [0043.403] I> t234-A01-0-Silicon (0x12347) Prod [0043.407] I> Boot-mode : BPMP Diagnostic [0043.411] I> Entry timestamp: 0x00000000 [0043.414] I> last_boot_error: 0x0 [0043.418] I> BR-BCT: preprod_dev_sign: 0 [0043.421] I> rst_source: 0xb, rst_level: 0x1 [0043.425] I> Task: Initialize MB2 params [0043.430] I> MB2-params @ 0x40060000 [0043.433] I> Task: Crypto init [0043.436] I> Task: Perform MB1 KAT tests [0043.440] I> Task: NVRNG health check [0043.444] I> NVRNG: Health check success [0043.447] I> Task: Secure debug controls [0043.451] I> Task: strap war set [0043.454] I> Task: Program NV master stream id [0043.459] I> Task: Verify boot mode [0043.464] I> Task: Alias fuses [0043.468] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0043.475] I> Task: Print SKU type [0043.478] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0043.483] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0043.487] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0043.492] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0043.496] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0043.500] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0043.505] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0043.509] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0043.514] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0043.518] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0043.522] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0043.526] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0043.530] I> FUSE_SKU_INFO_0 = 0xd3 [0043.534] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0043.538] I> FUSE_PACKAGE_INFO_0 = 0x2 [0043.541] I> SKU: Prod [0043.544] I> Task: Boost clocks [0043.547] I> Initializing NAFLL for BPMP_CPU_NIC. [0043.552] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0043.557] I> BPMP NAFLL lock success. [0043.561] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0043.565] I> Initializing PLLC2 for AXI_CBB. [0043.569] I> AXI_CBB : src = 35, divisor = 0 [0043.573] I> Task: Voltage monitor [0043.577] I> VMON: Vmon re-calibration and fine tuning done [0043.582] I> Task: UPHY init [0043.585] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0043.591] I> Task: Boot device init [0043.594] I> Boot_device: RCM [0043.597] I> USB configuration success [0043.601] I> Task: TSC init [0043.604] I> Task: Enable WDT 5th expiry [0043.607] I> Task: I2C register [0043.610] I> Task: Set I2C bus freq [0043.614] I> Task: Reset FSI [0043.616] I> Task: Enable clock-mon [0043.620] I> FMON: Fmon re-programming done [0043.624] I> Task: Mapper init [0043.627] I> Task: MB1 fixed firewalls [0043.634] W> Firewall readback mismatch [0043.639] I> Task: Load MB2/Applet/FSKP [0043.643] I> Loading MB2 Applet [0043.646] I> Slot: 0 [0043.648] I> Binary[21] block-352321536 (partition size: 0x50000) [0043.654] I> Binary name: MB2-Applet [0043.657] I> Size of crypto header is 8192 [0043.661] I> Size of crypto header is 8192 [0043.665] I> BCH of MB2-Applet read from storage [0043.670] I> BCH address is : 0x4004e000 [0043.674] I> MB2-Applet header integrity check is success [0043.679] I> Binary magic in BCH component 0 is MB2A [0043.684] I> component binary type is 21 [0043.687] I> Size of crypto header is 8192 [0043.705] I> MB2-Applet binary is read from storage [0043.711] I> MB2-Applet binary integrity check is success [0043.716] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x42440) [0043.723] I> Task: Prepare MB2 params [0043.726] I> Task: Misc NV security settings [0043.731] I> NVDEC sticky bits programming done [0043.735] I> Successfully powergated NVDEC [0043.739] I> Task: Disable/Reload WDT [0043.743] I> Task: Program misc carveouts [0043.746] I> Task: Disable SCPM/POD reset [0043.750] I> SLCG Global override status := 0x0 [0043.755] I> MB1: MSS reconfig completed [0043.759] W> Firewall readback mismatch [0043.762] W> Firewall readback mismatch [0043.766] W> Firewall readback mismatch [0043.770] W> Firewall readback mismatch [0043.773] W> Firewall readback mismatch [0043.777] W> Firewall readback mismatch [0043.781] W> Firewall readback mismatch [0043.784] W> Firewall readback mismatch [0043.788] W> Firewall readback mismatch [0043.792] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-b648c465) I> t234-A01-0-Silicon (0x12347) Prod I> Emulation: I> Entry timestamp: 0x00000000 I> Task: Pinmux init I> Task: Crypto init I> Task: Boot device init I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: SDMMC_BOOT instance: 3 E> Error in command_complete 18000 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 0-3 I> Secondary storage device: SDMMC_USER instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 1-3 I> Secondary storage device: QSPI_FLASH instance: 0 I> Task: I2C register I> Task: Register exit handlers I> Task: Enter 3p server I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000001 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> strt_pg_num(0) num_of_pgs(16) read_buf(0x40071738) I> BRBCT integrity check is success I> Validation passed for 1 copy of BRBCT @ 0 I> Rebooting : reboot-recovery �� [0090.444] I> MB1 (version: 1.4.0.1-t234-54845784-08e631ca) [0090.450] I> t234-A01-0-Silicon (0x12347) Prod [0090.454] I> Boot-mode : BPMP Diagnostic [0090.458] I> Entry timestamp: 0x00000000 [0090.461] I> last_boot_error: 0x0 [0090.465] I> BR-BCT: preprod_dev_sign: 0 [0090.468] I> rst_source: 0xb, rst_level: 0x1 [0090.473] I> Task: Initialize MB2 params [0090.477] I> MB2-params @ 0x40060000 [0090.480] I> Task: Crypto init [0090.483] I> Task: Perform MB1 KAT tests [0090.487] I> Task: NVRNG health check [0090.491] I> NVRNG: Health check success [0090.494] I> Task: Secure debug controls [0090.498] I> Task: strap war set [0090.501] I> Task: Program NV master stream id [0090.506] I> Task: Verify boot mode [0090.511] I> Task: Alias fuses [0090.515] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0090.522] I> Task: Print SKU type [0090.525] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0090.530] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0090.535] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0090.539] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0090.543] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0090.547] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0090.552] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0090.556] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0090.561] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0090.565] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0090.569] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0090.573] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0090.577] I> FUSE_SKU_INFO_0 = 0xd3 [0090.581] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0090.585] I> FUSE_PACKAGE_INFO_0 = 0x2 [0090.588] I> SKU: Prod [0090.591] I> Task: Boost clocks [0090.594] I> Initializing NAFLL for BPMP_CPU_NIC. [0090.599] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0090.604] I> BPMP NAFLL lock success. [0090.608] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0090.612] I> Initializing PLLC2 for AXI_CBB. [0090.616] I> AXI_CBB : src = 35, divisor = 0 [0090.621] I> Task: Voltage monitor [0090.624] I> VMON: Vmon re-calibration and fine tuning done [0090.629] I> Task: UPHY init [0090.632] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0090.638] I> Task: Boot device init [0090.641] I> Boot_device: RCM [0090.644] I> USB configuration success [0090.648] I> Task: TSC init [0090.651] I> Task: Enable WDT 5th expiry [0090.655] I> Task: I2C register [0090.658] I> Task: Set I2C bus freq [0090.661] I> Task: Reset FSI [0090.664] I> Task: Enable clock-mon [0090.668] I> FMON: Fmon re-programming done [0090.672] I> Task: Mapper init [0090.675] I> Task: MB1 fixed firewalls [0090.681] W> Firewall readback mismatch [0090.686] I> Task: Load MB2/Applet/FSKP [0090.690] I> Loading MB2 Applet [0090.693] I> Slot: 0 [0090.695] I> Binary[21] block-352321536 (partition size: 0x50000) [0090.701] I> Binary name: MB2-Applet [0090.704] I> Size of crypto header is 8192 [0090.708] I> Size of crypto header is 8192 [0090.712] I> BCH of MB2-Applet read from storage [0090.717] I> BCH address is : 0x4004e000 [0090.721] I> MB2-Applet header integrity check is success [0090.726] I> Binary magic in BCH component 0 is MB2A [0090.731] I> component binary type is 21 [0090.735] I> Size of crypto header is 8192 [0090.752] I> MB2-Applet binary is read from storage [0090.758] I> MB2-Applet binary integrity check is success [0090.763] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x42440) [0090.770] I> Task: Prepare MB2 params [0090.774] I> Task: Misc NV security settings [0090.778] I> NVDEC sticky bits programming done [0090.782] I> Successfully powergated NVDEC [0090.786] I> Task: Disable/Reload WDT [0090.790] I> Task: Program misc carveouts [0090.794] I> Task: Disable SCPM/POD reset [0090.797] I> SLCG Global override status := 0x0 [0090.802] I> MB1: MSS reconfig completed [0090.806] W> Firewall readback mismatch [0090.809] W> Firewall readback mismatch [0090.813] W> Firewall readback mismatch [0090.817] W> Firewall readback mismatch [0090.820] W> Firewall readback mismatch [0090.824] W> Firewall readback mismatch [0090.828] W> Firewall readback mismatch [0090.831] W> Firewall readback mismatch [0090.835] W> Firewall readback mismatch [0090.839] W> Firewall readback mismatch I> Applet (version: 0.0.0.0-t234-54845784-b648c465) I> t234-A01-0-Silicon (0x12347) Prod I> Emulation: I> Entry timestamp: 0x00000000 I> Task: Pinmux init I> Task: Crypto init I> Task: Boot device init I> Applet do storage init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : clk_m I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: SDMMC_BOOT instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 0-3 I> Secondary storage device: SDMMC_USER instance: 3 E> Error in command_complete 18001 int_status E> OCR failed, error = 39390706 E> STORAGE: Failed to open SDMMC: 3. W> Ignoring init failure for device 1-3 I> Secondary storage device: QSPI_FLASH instance: 0 I> Task: I2C register I> Task: Register exit handlers I> Task: Enter 3p server I> USB configuration success I> Populate chip info I> RAM_CODE 0x4000001 I> Populate eeprom info I> Populate eeprom info for module cvm I> dump bct I> strt_pg_num(0) num_of_pgs(16) read_buf(0x40071738) I> BRBCT integrity check is success I> Validation passed for 1 copy of BRBCT @ 0 I> Rebooting : reboot-recovery �� [0037.857] I> MB1 (version: 1.4.0.1-t234-54845784-08e631ca) [0037.862] I> t234-A01-0-Silicon (0x12347) Prod [0037.867] I> Boot-mode : Coldboot [0037.870] I> Entry timestamp: 0x00000000 [0037.874] I> last_boot_error: 0x0 [0037.877] I> BR-BCT: preprod_dev_sign: 0 [0037.880] I> rst_source: 0xb, rst_level: 0x1 [0037.885] I> Task: SE error check [0037.888] I> Task: Bootchain select WAR set [0037.892] I> Task: Enable SLCG [0037.895] I> Task: CRC check [0037.898] I> Task: Initialize MB2 params [0037.902] I> MB2-params @ 0x40060000 [0037.905] I> Task: Crypto init [0037.908] I> Task: Perform MB1 KAT tests [0037.912] I> Task: NVRNG health check [0037.916] I> NVRNG: Health check success [0037.919] I> Task: MSS Bandwidth limiter settings for iGPU clients [0037.925] I> Task: Enabling and initialization of Bandwidth limiter [0037.931] I> No request to configure MBWT settings for any PC! [0037.937] I> Task: Secure debug controls [0037.941] I> Task: strap war set [0037.944] I> Task: Initialize SOC Therm [0037.948] I> Task: Program NV master stream id [0037.952] I> Task: Verify boot mode [0037.958] I> Task: Alias fuses [0037.961] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0037.968] I> Task: Print SKU type [0037.971] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0037.976] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0037.981] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0037.985] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0037.989] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0037.994] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0037.998] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0038.002] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0038.007] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0038.011] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0038.015] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0038.019] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0038.023] I> FUSE_SKU_INFO_0 = 0xd3 [0038.027] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0038.031] I> FUSE_PACKAGE_INFO_0 = 0x2 [0038.035] I> SKU: Prod [0038.037] I> Task: Boost clocks [0038.040] I> Initializing NAFLL for BPMP_CPU_NIC. [0038.045] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0038.050] I> BPMP NAFLL lock success. [0038.054] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0038.058] I> Initializing PLLC2 for AXI_CBB. [0038.063] I> AXI_CBB : src = 35, divisor = 0 [0038.067] I> Task: Voltage monitor [0038.070] I> VMON: Vmon re-calibration and fine tuning done [0038.075] I> Task: UPHY init [0038.080] I> HSIO UPHY init done [0038.083] W> Skipping GBE UPHY config [0038.087] I> Task: Boot device init [0038.090] I> Boot_device: RCM [0038.093] I> USB configuration success [0038.097] I> Task: TSC init [0038.100] I> Task: Load membct [0038.103] I> RAM_CODE 0x4000001 [0038.106] I> Loading MEMBCT [0038.108] I> Slot: 0 [0038.110] I> Binary[0] block-0 (partition size: 0x40000) [0038.116] I> Binary name: MEM-BCT-0 [0038.119] I> Size of crypto header is 8192 [0038.123] I> Size of crypto header is 8192 [0038.127] I> BCH of MEM-BCT-0 read from storage [0038.131] I> BCH address is : 0x40050000 [0038.135] I> MEM-BCT-0 header integrity check is success [0038.141] I> Binary magic in BCH component 0 is MEM0 [0038.145] I> component binary type is 0 [0038.152] I> MEM-BCT-0 binary is read from storage [0038.157] I> MEM-BCT-0 binary integrity check is success [0038.162] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0038.168] I> RAM_CODE 0x4000001 [0038.174] I> RAM_CODE 0x4000001 [0038.178] I> Task: Load Page retirement list [0038.182] I> Task: SDRAM params override [0038.186] I> Task: Save mem-bct info [0038.189] I> Task: Carveout allocate [0038.192] I> Update CCPLEX IST carveout from MB1-BCT [0038.197] I> ECC region[0]: Start:0x0, End:0x0 [0038.201] I> ECC region[1]: Start:0x0, End:0x0 [0038.206] I> ECC region[2]: Start:0x0, End:0x0 [0038.210] I> ECC region[3]: Start:0x0, End:0x0 [0038.214] I> ECC region[4]: Start:0x0, End:0x0 [0038.219] I> Non-ECC region[0]: Start:0x80000000, End:0x480000000 [0038.225] I> Non-ECC region[1]: Start:0x0, End:0x0 [0038.229] I> Non-ECC region[2]: Start:0x0, End:0x0 [0038.234] I> Non-ECC region[3]: Start:0x0, End:0x0 [0038.238] I> Non-ECC region[4]: Start:0x0, End:0x0 [0038.249] I> allocated(CO:43) base:0xbe000000 size:0x4000000 align: 0x200000 [0038.256] I> allocated(CO:39) base:0x47de00000 size:0x2200000 align: 0x10000 [0038.263] I> allocated(CO:20) base:0x47a000000 size:0x2000000 align: 0x2000000 [0038.270] I> allocated(CO:24) base:0x478000000 size:0x2000000 align: 0x2000000 [0038.277] I> allocated(CO:28) base:0x476000000 size:0x2000000 align: 0x2000000 [0038.284] I> allocated(CO:22) base:0x47c000000 size:0x1000000 align: 0x1000000 [0038.292] I> allocated(CO:35) base:0x475000000 size:0x1000000 align: 0x100000 [0038.299] I> allocated(CO:02) base:0x47d000000 size:0x800000 align: 0x800000 [0038.305] I> allocated(CO:03) base:0x474800000 size:0x800000 align: 0x800000 [0038.312] I> allocated(CO:06) base:0x474000000 size:0x800000 align: 0x800000 [0038.319] I> allocated(CO:56) base:0x473800000 size:0x800000 align: 0x200000 [0038.326] I> allocated(CO:07) base:0x47d800000 size:0x400000 align: 0x400000 [0038.333] I> allocated(CO:33) base:0x473400000 size:0x400000 align: 0x200000 [0038.340] I> allocated(CO:19) base:0x473180000 size:0x280000 align: 0x10000 [0038.347] I> allocated(CO:23) base:0x47dc00000 size:0x200000 align: 0x200000 [0038.354] I> allocated(CO:01) base:0x473000000 size:0x100000 align: 0x100000 [0038.361] I> allocated(CO:05) base:0x472f00000 size:0x100000 align: 0x100000 [0038.368] I> allocated(CO:08) base:0x472e00000 size:0x100000 align: 0x100000 [0038.375] I> allocated(CO:09) base:0x472d00000 size:0x100000 align: 0x100000 [0038.382] I> allocated(CO:12) base:0x472c00000 size:0x100000 align: 0x100000 [0038.389] I> allocated(CO:15) base:0x472b00000 size:0x100000 align: 0x100000 [0038.396] I> allocated(CO:17) base:0x472a00000 size:0x100000 align: 0x100000 [0038.403] I> allocated(CO:27) base:0x472900000 size:0x100000 align: 0x100000 [0038.410] I> allocated(CO:42) base:0x472800000 size:0x100000 align: 0x100000 [0038.417] I> allocated(CO:54) base:0x473100000 size:0x80000 align: 0x80000 [0038.423] I> allocated(CO:34) base:0x4727f0000 size:0x10000 align: 0x10000 [0038.430] I> allocated(CO:72) base:0x4725f0000 size:0x200000 align: 0x10000 [0038.437] I> allocated(CO:46) base:0x440000000 size:0x20000000 align: 0x20000000 [0038.444] I> allocated(CO:47) base:0x472000000 size:0x400000 align: 0x200000 [0038.451] I> allocated(CO:50) base:0x471e00000 size:0x200000 align: 0x100000 [0038.458] I> allocated(CO:48) base:0x4725d0000 size:0x20000 align: 0x10000 [0038.465] I> allocated(CO:69) base:0x4725b0000 size:0x20000 align: 0x10000 [0038.472] I> allocated(CO:49) base:0x4725a0000 size:0x10000 align: 0x10000 [0038.478] I> NSDRAM base: 0x80000000, end: 0x4725f0000, size: 0x3f25f0000 [0038.485] I> Task: Thermal check [0038.488] I> max_chip_limit = 105 [0038.491] I> min_chip_limit = -28 [0038.494] I> max temp read = 30 [0038.497] I> min temp read = 28 [0038.500] I> Task: Update FSI SCR with thermal fuse data [0038.506] I> Task: Enable WDT 5th expiry [0038.509] I> Task: I2C register [0038.512] I> Task: Set I2C bus freq [0038.516] I> Task: Reset FSI [0038.518] I> Task: Pinmux init [0038.522] I> skipped mmio_addr = 0x9240008 [0038.526] I> skipped mmio_addr = 0x9240000 [0038.529] I> skipped mmio_addr = 0x9240010 [0038.533] I> skipped mmio_addr = 0x9240018 [0038.537] I> skipped mmio_addr = 0x9240020 [0038.541] I> skipped mmio_addr = 0x9240030 [0038.545] I> skipped mmio_addr = 0x9240028 [0038.549] I> skipped mmio_addr = 0x9240038 [0038.553] I> skipped mmio_addr = 0x9240040 [0038.557] I> skipped mmio_addr = 0x9240048 [0038.561] I> skipped mmio_addr = 0x9241000 [0038.565] I> skipped mmio_addr = 0x9241008 [0038.569] I> skipped mmio_addr = 0x9241010 [0038.573] I> skipped mmio_addr = 0x9241018 [0038.577] I> skipped mmio_addr = 0x9241020 [0038.581] I> skipped mmio_addr = 0x9241028 [0038.585] I> skipped mmio_addr = 0x9241030 [0038.589] I> skipped mmio_addr = 0x9241038 [0038.593] I> skipped mmio_addr = 0x9241040 [0038.597] I> skipped mmio_addr = 0x9242000 [0038.600] I> skipped mmio_addr = 0x9242008 [0038.604] I> Task: Prod config init [0038.608] I> Task: Pad voltage init [0038.611] I> Task: Prod init [0038.614] I> Task: Program rst req config reg [0038.618] I> Task: Common rail init [0038.622] I> DONE: Thermal config [0038.625] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0038.633] I> DONE: SOC rail config [0038.637] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0038.643] I> DONE: MEMIO rail config [0038.647] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT. [0038.653] I> DONE: GPU rail info [0038.657] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT. [0038.663] I> DONE: CV rail info [0038.666] I> Task: Mem clock src [0038.669] I> Task: Misc. board config [0038.673] I> PMIC_CONFIG: Platform config not found in MB1 BCT. [0038.678] I> Task: SDRAM init [0038.681] I> MemoryType: 4 MemBctRevision: 1 [0038.688] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0038.695] I> MSS CAR: Init PLLM [0038.698] I> MSS CAR: Init PLLHUB [0038.703] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0038.715] I> SDRAM initialized! [0038.718] I> SDRAM Size in Total 0x400000000 [0038.722] I> Task: Dram Ecc scrub [0038.725] I> Task: DRAM alias check [0038.735] I> Task: Program NSDRAM carveout [0038.739] I> NSDRAM carveout encryption is enabled [0038.743] I> Program NSDRAM carveout [0038.747] I> Task: Register checker [0038.750] I> Task: Enable clock-mon [0038.754] I> FMON: Fmon re-programming done [0038.758] I> Task: Mapper init [0038.761] I> Task: SC7 Context Init [0038.765] W> SC7_CONTEXT_SAVE: SC7 ctx save is not supported. [0038.771] I> Task: CCPLEX IST init [0038.774] I> Task: CPU WP0 [0038.777] I> Loading MCE [0038.779] I> Slot: 0 [0038.781] I> Binary[8] block-134217728 (partition size: 0x80000) [0038.787] I> Binary name: MCE [0038.790] I> Size of crypto header is 8192 [0038.794] I> Size of crypto header is 8192 [0042.589] I> BCH of MCE read from storage [0042.593] I> BCH address is : 0x4003e000 [0042.597] I> MCE header integrity check is success [0042.601] I> Binary magic in BCH component 0 is MTSM [0042.606] I> component binary type is 8 [0042.610] I> Size of crypto header is 8192 [0042.617] I> MCE binary is read from storage [0042.622] I> MCE binary integrity check is success [0042.626] I> Binary MCE loaded successfully at 0x40000000 (0x2baf0) [0042.632] I> Size of crypto header is 8192 [0042.636] I> Sending WP0 mailbox command to PSC [0042.645] I> Task: XUSB Powergate [0042.649] I> Skipping powergate XUSB. [0042.652] I> Task: MB1 fixed firewalls [0042.658] W> Firewall readback mismatch [0042.663] I> Task: Load bpmp-fw [0042.666] I> Slot: 0 [0042.668] I> Binary[15] block-251658240 (partition size: 0x180000) [0042.675] I> Binary name: BPMP_FW [0042.678] I> Size of crypto header is 8192 [0042.682] I> Size of crypto header is 8192 [0042.686] I> BCH of BPMP_FW read from storage [0042.690] I> BCH address is : 0x807fe000 [0042.694] I> BPMP_FW header integrity check is success [0042.699] I> Binary magic in BCH component 0 is BPMF [0042.704] I> component binary type is 15 [0042.707] I> Size of crypto header is 8192 [0042.729] I> BPMP_FW binary is read from storage [0042.735] I> BPMP_FW binary integrity check is success [0042.740] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfc080) [0042.747] I> Slot: 0 [0042.749] I> Binary[16] block-268435456 (partition size: 0x400000) [0042.755] I> Binary name: BPMP_FW_DTB [0042.758] I> Size of crypto header is 8192 [0042.762] I> Size of crypto header is 8192 [0042.766] I> BCH of BPMP_FW_DTB read from storage [0042.771] I> BCH address is : 0x807fc000 [0042.774] I> BPMP_FW_DTB header integrity check is success [0042.780] I> Binary magic in BCH component 0 is BPMD [0042.785] I> component binary type is 16 [0042.788] I> Size of crypto header is 8192 [0042.797] I> BPMP_FW_DTB binary is read from storage [0042.802] I> BPMP_FW_DTB binary integrity check is success [0042.807] I> Binary BPMP_FW_DTB loaded successfully at 0x807bdab0 (0x3e540) [0042.814] I> Task: BPMP fw ast config [0042.818] I> Task: Load psc-fw [0042.821] I> Slot: 0 [0042.823] I> Binary[17] block-285212672 (partition size: 0xc0000) [0042.829] I> Binary name: PSC_FW [0042.832] I> Size of crypto header is 8192 [0042.836] I> Size of crypto header is 8192 [0042.840] I> BCH of PSC_FW read from storage [0042.844] I> BCH address is : 0x80ffe000 [0042.848] I> PSC_FW header integrity check is success [0042.853] I> Binary magic in BCH component 0 is PFWP [0042.857] I> component binary type is 17 [0042.861] I> Size of crypto header is 8192 [0042.870] I> PSC_FW binary is read from storage [0042.875] I> PSC_FW binary integrity check is success [0042.880] I> Binary PSC_FW loaded successfully at 0x80fb4210 (0x49df0) [0042.887] I> Task: Load nvdec-fw [0042.890] I> Slot: 0 [0042.892] I> Binary[7] block-117440512 (partition size: 0x100000) [0042.898] I> Binary name: NVDEC [0042.901] I> Size of crypto header is 8192 [0042.905] I> Size of crypto header is 8192 [0042.909] I> BCH of NVDEC read from storage [0042.913] I> BCH address is : 0x800fe000 [0042.916] I> NVDEC header integrity check is success [0042.921] I> Binary magic in BCH component 0 is NDEC [0042.926] I> component binary type is 7 [0042.930] I> Size of crypto header is 8192 [0042.939] I> NVDEC binary is read from storage [0042.943] I> NVDEC binary integrity check is success [0042.948] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0042.957] I> Task: Load tsec-fw [0042.960] I> TSEC-FW load support not enabled [0042.964] I> Task: GPIO interrupt map [0042.968] I> Task: SC7 context save [0042.972] W> SC7_CONTEXT_SAVE: SC7 ctx save is not supported. [0042.977] I> Task: Load MB2/Applet/FSKP [0042.981] I> Loading MB2 [0042.983] I> Slot: 0 [0042.986] I> Binary[6] block-100663296 (partition size: 0x80000) [0042.991] I> Binary name: MB2 [0042.994] I> Size of crypto header is 8192 [0042.998] I> Size of crypto header is 8192 [0043.002] I> BCH of MB2 read from storage [0043.006] I> BCH address is : 0x8007e000 [0043.010] I> MB2 header integrity check is success [0043.015] I> Binary magic in BCH component 0 is MB2B [0043.019] I> component binary type is 6 [0043.023] I> Size of crypto header is 8192 [0043.034] I> MB2 binary is read from storage [0043.039] I> MB2 binary integrity check is success [0043.044] I> Binary MB2 loaded successfully at 0x80000000 (0x69900) [0043.050] I> Task: Map CCPLEX SHARED carveout [0043.054] I> Task: Prepare MB2 params [0043.058] I> Task: Dram ecc test [0043.061] I> Task: Misc NV security settings [0043.065] I> NVDEC sticky bits programming done [0043.070] I> Successfully powergated NVDEC [0043.074] I> Task: Disable/Reload WDT [0043.077] I> Task: Program misc carveouts [0043.081] I> Program IPC carveouts [0043.084] I> Task: Disable SCPM/POD reset [0043.088] I> SLCG Global override status := 0x0 [0043.093] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-c6a05a9f) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : RCM BOOT I> Emulation: I> Entry timestamp: 0x0291f6df I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x473800000, size:0x800000] I> Task: SE error check I> Task: Crypto init I> Task: MB2 Params integrity check I> Task: ARI update carveout TZDRAM I> Task: Configure OEM set LA/PTSA values I> Task: Check MC errors I> Task: Enable hot-plug capability I> Task: Set blob address I> Task: PSC mailbox init I> Task: Enable clock for external modules I> Task: I2C register I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout I> Task: Program CBB PCIE AMAP regions I> Task: Pass DRAM ECC PRL Flag to FSI I> Task: Load and authenticate registered FWs I> Task: Load AUXP FWs I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Successfully register PVA FW load task with MB2 loader I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x472e00000 I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x472a00000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x47a000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 12056320 bytes I> dce: plain binary integrity check is success I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x47a000000 I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x47d800000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x472f00000 I> pva-fw: Authentication Finalize Done I> Binary pva-fw loaded successfully at 0x473180000 I> Task: Check MC errors I> Task: Carveout setup I> Program remaining OEM carveouts I> Task: Enable FSI VMON I> Task: Restore XUSB sec I> Task: Enable FSI SE clock I> Task: Initialize SBSA UART CAR I> Task: Initialize CPUBL Params I> CPUBL-params @ 0x476000000 I> Task: Prepare eeprom data I> Task: Unpowergate APE W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: Memctrl reconfig pending clients I> Task: OEM firewalls I> OEM firewalls configured I> Task: Powergate APE I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings I> Task: Unhalt AUXPs I> Unhalting SPE.. I> Enabling combined UART ����spe: early_init ����vic initialized ����tsc initialized ����aon lic initialized ����spe: tag is 5243985d1b1eb3f06fac6d36bd7e74ac ����spe: SafeRTOS v8.4 ����spe: init ����scheduler initialized ����aon hsp initialized ����tag initialized ����tcu initialized ����bpmp ipc initialized ����spe: late init ����cpu_nic clock initialized ����apb clock initialized ����pm initialized ����bpmp hsp initialized ����top1 hsp initialized ����ccplex ipc initialized ����spe: start scheduler ���� I> Task: Trigger mailbox for PSC-BL1 exit I> Sending opcode 0x4d420802 to psc I> Received ACK from psc I> Task: Start secure NOR provision I> Skip Secure NOR provisioning I> Task: Trigger load FSI keyblob I> Task: Complete load FSI keyblob I> Task: MB2-PSC_FW Key Manager Init I> Sending opcode OP_PSC_KEY_MANAGER to psc-fw I> Sending opcode 0x4b45594d to psc �� hwwdt_init: WDT boot cfg 0x710010 sts 0x10 bpmp: socket 0 bpmp: base binary md5 is ac83764aab09e08198fdb2c012af5bb1 bpmp: combined binary md5 is e350806227175366b0bd9b0224627752 bpmp: firmware tag is e350806227175366b0bd-ac83764aab0 Write control check for CBB_CENTRAL_CBB_FIREWALL_PWM7_BLF failed, expected value: 00100008 != actual value: 0010000a address: 13a178a8 initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early initialized pm 465 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ��I> Received ACK from psc I> Task: Unhalt FSI I> FSI unhalt skipped I> Task: Unhalt AUXPs��initialized avfs_clk_platform initialized powergate �� I> SCE unhalt skip��initialized dvs initialized clk_mach_config suspend progress: 0x0 initialized suspend initialized strap initialized mce_dbell ��ped I> Unhalting RCE I> RCE unhalt successful I> Unhalting DCE I> DCE unhalt successful I> APE unhalt skipped I> Task: Load HV/CPUBL I> Task: Load TOS I> Task: Trigger load TSEC leyblob I> Sending opcode 0x53535452 to psc I> Sent opcode to psc I> Task: Load and authenticate registered FWs ��[ 5.615744] Camera-FW on t234-rce-safe started ��I> MB2-params @ 0x40060000 I> NSDRAM carveout base: 0x80000000, size: 0x3f25f0000 I> cpu��TCU early console enabled. ��initialized emc initialized emc_mrq ��bl_params: nsdram: carveout: 1��initialized clk_cal initialized uphy_dt initialized uphy_mrq HSIO UPHY reset has been de-asserted 0x0 initialized uphy ��, encryption: 1 �� ��I> ��initialized pg_late initialized pg_mrq_init swdtimer_init: reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ��DCE Started DCE_R5_Init ��cpubl: Authentication Finalize Done I> Binary cpubl loaded success��initialized clk_cal_late initialized noc_late initialized cvc ��fully at 0x472000000 ��MPU enabl��initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/2 have not matching zones 0/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zones 0/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/0 have not matching zones 1/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zones 1/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zones 2/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zones 2/1 initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable pwm3 enable sdmmc4_axicif enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable usb2_trk enable xusb_ss_dev enable xusb_fs_dev enable xusb_falcon enable dsi_lp ��[ 5.804744] Camer��enable xusb_core_mux enable xusb_core_dev initialized clk_mach_post initialized pg_post initialized regulator_post initialized profile initialized mrq ��a-FW on t234-rce-safe ready SHA1=e2238c99 (crt 21.708 ms, total boot 211.780 m��initialized patrol_scrubber initialized cactmon initialized extras_post bpm��s) ��p: init complete ��ed DCE_SW_Init Admin Task Init Admin Task Init co��I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0xc1dc03f0 ��mplete Print Task Init RM Task Init SHA Task Init Admin Task Star��I> Relocating OP-TEE dtb from: 0xc1eff4e0 to 0xbe040020, size: 0x2837 I> [0] START: 0x80000000, SIZE: 0x3f25f0000 I> [1] START: 0x476000000, SIZE: 0x2000000 ��ted DCE SC7 SHA Enabled RM Task Started RM Task Running Print Task Started Print Task Running SHA Task Started DCE: FW Boot Complete Admin Task Runn��I> Setting NS memory ranges to OP-TEE dtb finished. ��ing SHA Task Running ��I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0xbe020000 I> EKB detected (length: 0x410) @ VA:0xbe020000 I> Task: Add cpubl params integrity check I> Added cpubl params digest. I> Task: Prepare TOS params I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0xbe040020 I> NVRNG: Health check success I> NVRNG: Health check success I> Task: Disable MSS perf stats I> Task: Program display sticky bits I> Task: SMMU external bypass disable I> Task: SMMU init I> Task: Program GICv3 registers I> Task: Audit firewall settings I> Task: Clear dec source key I> MB2 finished ��NOTICE: BL31: v2.8(release):8a7f432be NOTICE: BL31: Built : 10:30:22, Nov 30 2023 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.22 (gcc version 11.3.0 (Buildroot 2022.08)) #2 Thu Nov 30 18:39:35 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Test OEM keys are being used. This is insecure for shipping products! I/TC: Primary CPU switching to normal world boot �� Jetson UEFI firmware (version 36.2.0-gcid-34956989 built on 2023-11-30T18:35:35+00:00) ��E/TC:?? 00 get_rpc_alloc_res:645 RPC allocation failed. Non-secure world result: ret=0xffff0000 ret_origin=0 E/LD: init_elf:486 sys_open_ta_bin(bc50d971-d4c9-42c4-82cb-343fb7f37896) E/TC:?? 00 ldelf_init_with_ldelf:131 ldelf failed with res: 0xffff000c �� ��[ 7.683140] Camera-FW on t234-rce-safe started TCU early console enabled. �� ��[ 7.730298] Camera-FW on t234-rce-safe ready SHA1=e2238c99 (crt 0.891 ms, total boot 48.099 ms) �� Jetson System firmware version 36.2.0-gcid-34956989 date 2023-11-30T18:35:35+00: 00 ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services... ��debugfs initialized ��I/TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled ��[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.15.131-rt-tegra (roberthilton@rdevlnx) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2022.08) 11.3.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT_RT Sat Feb 10 14:31:30 EST 2024 () [ 0.000000] Machine model: NVIDIA Jetson Orin NX Engineering Reference Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: SMBIOS=0xffff0000 SMBIOS 3.0=0x43b650000 MEMATTR=0x4359a4018 RNG=0x4276f0018 MEMRESERVE=0x429edaf18 [ 0.000000] random: crng init done [ 0.000000] secureboot: Secure boot disabled [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000461000000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x0000000477ffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x4603117c0-0x460313fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000477ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bdffffff] [ 0.000000] node 0: [mem 0x00000000c2000000-0x00000000fdfdffff] [ 0.000000] node 0: [mem 0x00000000fdfe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000042c66afff] [ 0.000000] node 0: [mem 0x000000042c66b000-0x000000042c84bfff] [ 0.000000] node 0: [mem 0x000000042c84c000-0x0000000439d2ffff] [ 0.000000] node 0: [mem 0x0000000439d30000-0x000000043bc6ffff] [ 0.000000] node 0: [mem 0x000000043bc70000-0x0000000471dfffff] [ 0.000000] node 0: [mem 0x0000000471e00000-0x0000000471ffffff] [ 0.000000] node 0: [mem 0x0000000472000000-0x000000047259ffff] [ 0.000000] node 0: [mem 0x0000000476000000-0x0000000477ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000477ffffff] [ 0.000000] On node 0, zone DMA: 16384 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 14944 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 28 pages/cpu s77744 r8192 d28752 u114688 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Address authentication (architected algorithm) [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Hardware dirty bit management [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4065184 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/initrd rw rootwait mminit_loglevel=4 console=ttyTCU0,115200 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 bl_prof_dataptr=2031616@0x471E10000 bl_prof_ro_ptr=65536@0x471E00000 [ 0.000000] Unknown kernel command line parameters "mminit_loglevel=4 fbcon=map:0 bl_prof_dataptr=2031616@0x471E10000 bl_prof_ro_ptr=65536@0x471E00000", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) ins 0 /lib/modulemem au.131-riniegra/estaa/drivers, h/neeapthelocrne:off, heat/rree:off /r8168.ko0000] software IO TLB: mapped [mem 0x00000000f9fe0000-0x00000000fdfe0000] (64MB) [ 0.000000] Memory: 15690328K/16520832K available (18496K kernel code, 4034K rwdata, 9768K rodata, 7488K init, 549K bena_re 56e_accessres erved, 26ena4K cma re-resere a) ss 0.000000] SLUB: HWalign=64, Order=0-3, MinOinsbjeib/module=0,s/5 CP.15.13Us=1-r8, es=egr1 a/k[ .00000drivers/phy/0] ra/phyce gra194nt -p2o ing verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU impleinsmentat /l. ib/ 0.00ule0000] rcu: RCU ev.15 tracing is enabled. [ 0.00000a/k0] rcu: RCU restricting CPverfrom NR_Cs/pPUSci/=256 to ntror_cllepu_r/dids=8. [ wc/ 0.00pci0] rcue-t: RCUa19 prioro ity bo osting: priority 1 delay 500 ms. [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000000] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000314] Console: colour dummy device 80x25 [ 0.000357] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000363] pid_max: default: 32768 minimum: 301 [ 0.000394] LSM: Security Framework initializing [ 0.000410] Yama: becoming mindful. [ 0.000423] SELinux: Initializing. [ 0.000506] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000543] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.001394] rcu: Hierarchical SRCU implementation. [ 0.003425] Tegra Revision: A01 SKU: 211 CPU Process: 0 SoC Process: 0 [ 0.003665] Remapping and enabling EFI services. [ 0.004455] smp: Bringing up secondary CPUs ... [ 0.004854] Detected PIPT I-cache on CPU1 [ 0.004881] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.004898] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.005272] Detected PIPT I-cache on CPU2 [ 0.005284] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.005297] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.005652] Detected PIPT I-cache on CPU3 [ 0.005661] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.005672] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.007999] Detected PIPT I-cache on CPU4 [ 0.008021] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.008040] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.008450] Detected PIPT I-cache on CPU5 [ 0.008459] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.008471] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.008838] Detected PIPT I-cache on CPU6 [ 0.008848] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.008859] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.009234] Detected PIPT I-cache on CPU7 [ 0.009244] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.009255] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.009304] smp: Brought up 1 node, 8 CPUs [ 0.009307] SMP: Total of 8 processors activated. [ 0.009309] CPU features: detected: 32-bit EL0 Support [ 0.009310] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.009312] CPU features: detected: Common not Private translations [ 0.009312] CPU features: detected: CRC32 instructions [ 0.009313] CPU features: detected: Data cache clean to Point of Persistence [ 0.009314] CPU features: detected: Generic authentication (architected algorithm) [ 0.009315] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.009315] CPU features: detected: LSE atomic instructions [ 0.009316] CPU features: detected: Privileged Access Never [ 0.009317] CPU features: detected: RAS Extension Support [ 0.009318] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.033769] CPU: All CPU(s) started at EL2 [ 0.035382] devtmpfs: initialized [ 0.050963] KASLR enabled [ 0.051076] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.051088] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.053196] pinctrl core: initialized pinctrl subsystem [ 0.053792] SMBIOS 3.6.0 present. [ 0.053802] DMI: Unknown NVIDIA Jetson Orin NX Engineering Reference Developer Kit/NVIDIA Jetson Orin NX Engineering Reference Developer Kit, BI [ 0.054130] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.055558] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.055672] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.055772] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.055808] audit: initializing netlink subsys (disabled) [ 0.055897] audit: type=2000 audit(0.052:1): state=initialized audit_enabled=0 res=1 [ 0.056869] thermal_sys: Registered thermal governor 'step_wise' [ 0.056873] thermal_sys: Registered thermal governor 'user_space' [ 0.056875] thermal_sys: Registered thermal governor 'power_allocator' [ 0.058838] cpuidle: using governor menu [ 0.058959] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.059039] ASID allocator initialised with 32768 entries [ 0.060134] Serial: AMBA PL011 UART driver [ 0.068161] tegra-mc 2c00000.memory-controller: unknown: write @0x0000000050060540: Security violation (TrustZone violation) [ 0.068812] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 117, base_baud = 0) is a SBSA [ 0.079417] platform bpmp: Fixing up cyclic dependency with 2c60000.external-memory-controller [ 0.087831] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.087836] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.087837] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.087838] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.088450] cryptd: max_cpu_qlen set to 1000 [ 0.089823] ACPI: Interpreter disabled. [ 0.090806] VDD_1V8_AO: supplied by VDD_5V0_SYS [ 0.090919] VDD_3V3_AO: supplied by VDD_5V0_SYS [ 0.091177] VDD_AV10_HUB: supplied by VDD_5V0_SYS [ 0.091470] iommu: Default domain type: Translated [ 0.091473] iommu: DMA domain TLB invalidation policy: strict mode [ 0.091682] SCSI subsystem initialized [ 0.091788] vgaarb: loaded [ 0.091880] usbcore: registered new interface driver usbfs [ 0.091896] usbcore: registered new interface driver hub [ 0.091906] usbcore: registered new device driver usb [ 0.092254] pps_core: LinuxPPS API ver. 1 registered [ 0.092255] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.092265] PTP clock support registered [ 0.092318] EDAC MC: Ver: 3.0.0 [ 0.092994] Registered efivars operations [ 0.093454] FPGA manager framework [ 0.093500] Advanced Linux Sound Architecture Driver Initialized. [ 0.094001] clocksource: Switched to clocksource arch_sys_counter [ 0.116657] VFS: Disk quotas dquot_6.6.0 [ 0.116697] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.116838] pnp: PnP ACPI: disabled [ 0.119670] NET: Registered PF_INET protocol family [ 0.120176] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.122539] tcp_listen_portaddr_hash hash table entries: 8192 (order: 6, 393216 bytes, linear) [ 0.122763] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.122772] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.122930] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes, linear) [ 0.124341] TCP: Hash tables configured (established 131072 bind 65536) [ 0.124477] UDP hash table entries: 8192 (order: 7, 786432 bytes, linear) [ 0.124928] UDP-Lite hash table entries: 8192 (order: 7, 786432 bytes, linear) [ 0.125474] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.125778] RPC: Registered named UNIX socket transport module. [ 0.125781] RPC: Registered udp transport module. [ 0.125782] RPC: Registered tcp transport module. [ 0.125783] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.125791] PCI: CLS 0 bytes, default 64 [ 0.125912] Unpacking initramfs... [ 0.134079] hw perfevents: enabled with armv8_cortex_a78 PMU driver, 7 counters available [ 0.135773] Initialise system trusted keyrings [ 0.135846] workingset: timestamp_bits=42 max_order=22 bucket_order=0 [ 0.139066] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.139395] NFS: Registering the id_resolver key type [ 0.139415] Key type id_resolver registered [ 0.139417] Key type id_legacy registered [ 0.139459] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.139468] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.139481] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.139694] 9p: Installing v9fs 9p2000 file system support [ 0.151751] NET: Registered PF_ALG protocol family [ 0.151759] Key type asymmetric registered [ 0.151762] Asymmetric key parser 'x509' registered [ 0.151809] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.151814] io scheduler mq-deadline registered [ 0.151817] io scheduler kyber registered [ 0.165842] EINJ: ACPI disabled. [ 0.177579] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.179811] SuperH (H)SCI(F) driver initialized [ 0.180213] msm_serial: driver initialized [ 0.180945] printk: console [ttyTCU0] enabled [ 0.181915] arm-smmu 8000000.iommu: probing hardware configuration... [ 0.181922] arm-smmu 8000000.iommu: SMMUv2 with: [ 0.181930] arm-smmu 8000000.iommu: stage 1 translation [ 0.181932] arm-smmu 8000000.iommu: stage 2 translation [ 0.181936] arm-smmu 8000000.iommu: nested translation [ 0.181945] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 0.181953] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 0.181974] arm-smmu 8000000.iommu: Supported page sizes: 0x61311000 [ 0.181978] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.181982] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.183240] arm-smmu 10000000.iommu: probing hardware configuration... [ 0.183243] arm-smmu 10000000.iommu: SMMUv2 with: [ 0.183245] arm-smmu 10000000.iommu: stage 1 translation [ 0.183246] arm-smmu 10000000.iommu: stage 2 translation [ 0.183246] arm-smmu 10000000.iommu: nested translation [ 0.183250] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 0.183252] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 0.183261] arm-smmu 10000000.iommu: Supported page sizes: 0x61311000 [ 0.183262] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.183263] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.183741] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.183744] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.183745] arm-smmu 12000000.iommu: stage 1 translation [ 0.183746] arm-smmu 12000000.iommu: stage 2 translation [ 0.183747] arm-smmu 12000000.iommu: nested translation [ 0.183750] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 0.183752] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 0.183757] arm-smmu 12000000.iommu: Supported page sizes: 0x61311000 [ 0.183758] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.183760] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.194332] loop: module loaded [ 0.195453] megasas: 07.717.02.00-rc1 [ 0.200322] tun: Universal TUN/TAP device driver, 1.6 [ 0.200907] thunder_xcv, ver 1.0 [ 0.200942] thunder_bgx, ver 1.0 [ 0.200968] nicpf, ver 1.0 [ 0.201897] hclge is initializing [ 0.201936] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.201942] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.202035] e1000: Intel(R) PRO/1000 Network Driver [ 0.202041] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.202082] e1000e: Intel(R) PRO/1000 Network Driver [ 0.202088] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.202128] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.202137] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.202160] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.202168] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.202390] sky2: driver version 1.30 [ 0.203091] VFIO - User Level meta-driver version: 0.3 [ 0.204495] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.204508] ehci-pci: EHCI PCI platform driver [ 0.204540] ehci-platform: EHCI generic platform driver [ 0.204624] ehci-orion: EHCI orion driver [ 0.204683] ehci-exynos: EHCI Exynos driver [ 0.204739] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.204769] ohci-pci: OHCI PCI platform driver [ 0.204801] ohci-platform: OHCI generic platform driver [ 0.204881] ohci-exynos: OHCI Exynos driver [ 0.205321] usbcore: registered new interface driver usb-storage [ 0.207288] rtc-efi rtc-efi.0: registered as rtc0 [ 0.207331] rtc-efi rtc-efi.0: setting system clock to 1970-01-01T00:53:30 UTC (3210) [ 0.207815] i2c_dev: i2c /dev entries driver [ 0.209182] pps pps0: new PPS source ktimer [ 0.209190] pps pps0: ktimer PPS source registered [ 0.209201] pps_ldisc: PPS line discipline registered [ 0.211504] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 0.213689] sdhci: Secure Digital Host Controller Interface driver [ 0.213695] sdhci: Copyright(c) Pierre Ossman [ 0.214219] Synopsys Designware Multimedia Card Interface Driver [ 0.214875] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.216830] SMCCC: SOC_ID: ID = jep106:036b:0234 Revision = 0x00000401 [ 0.217375] tegra-bpmp bpmp: Adding to iommu group 0 [ 0.219696] tegra-bpmp bpmp: firmware: e350806227175366b0bd-ac83764aab0 [ 0.775637] Freeing initrd memory: 40744K [ 3.466875] clocksource: tsc: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 3.466902] clocksource: osc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 49772407460 ns [ 3.466906] clocksource: usec: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 3.467624] usbcore: registered new interface driver usbhid [ 3.467630] usbhid: USB HID core driver [ 3.474022] optee: probing for conduit method. [ 3.474070] optee: revision 3.22 (1b7f2993) [ 3.533775] optee: dynamic shared memory is enabled [ 3.534083] optee: initialized driver [ 3.537207] usbcore: registered new interface driver snd-usb-audio [ 3.539612] NET: Registered PF_PACKET protocol family [ 3.539935] 9pnet: Installing 9P2000 support [ 3.540089] Key type dns_resolver registered [ 3.542174] printk: console [ttyTCU0]: printing thread started [ 3.542334] Loading compiled-in X.509 certificates [ 3.557938] Loaded X.509 cert 'Build time autogenerated kernel key: 29a2ebdf3f8c89ea67fded1c7d46fc7512311f4b' [ 3.611187] simple-framebuffer chosen:framebuffer: framebuffer at 0x47de00000, 0x1680000 bytes [ 3.611207] simple-framebuffer chosen:framebuffer: format=x8r8g8b8, mode=2560x1440x32, linelength=16384 [ 3.615264] simple-framebuffer chosen:framebuffer: fb0: simplefb registered! [ 3.616242] tegra-gpcdma 2600000.dma-controller: Adding to iommu group 1 [ 3.618206] tegra-gpcdma 2600000.dma-controller: GPC DMA driver register 31 channels [ 3.619475] serial-tegra 3100000.serial: RX in PIO mode [ 3.619481] serial-tegra 3100000.serial: TX in PIO mode [ 3.619550] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 112, base_baud = 0) is a TEGRA_UART [ 3.620063] serial-tegra 3140000.serial: RX in PIO mode [ 3.620067] serial-tegra 3140000.serial: TX in PIO mode [ 3.620099] 3140000.serial: ttyTHS2 at MMIO 0x3140000 (irq = 113, base_baud = 0) is a TEGRA_UART [ 3.623554] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.623562] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.624030] tegra-i2c 3160000.i2c: Adding to iommu group 1 [ 3.629641] tegra-i2c 3180000.i2c: Adding to iommu group 1 [ 3.638215] tegra-i2c 31b0000.i2c: Adding to iommu group 1 [ 3.649345] tegra-i2c c240000.i2c: Adding to iommu group 1 [ 3.661118] i2c 1-0025: Fixing up cyclic dependency with 3520000.padctl [ 3.662026] tegra-i2c c250000.i2c: Adding to iommu group 1 [ 3.695907] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1970000 KHz, changing to: 1984000 KHz [ 3.700987] tegra-xusb 3610000.usb: Adding to iommu group 2 [ 3.719136] tegra-xusb 3610000.usb: Firmware timestamp: 2023-02-10 03:48:10 UTC [ 3.719146] tegra-xusb 3610000.usb: xHCI Host Controller [ 3.719177] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 1 [ 3.719952] tegra-xusb 3610000.usb: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000010810 [ 3.720213] tegra-xusb 3610000.usb: irq 124, io mem 0x03610000 [ 3.720370] tegra-xusb 3610000.usb: xHCI Host Controller [ 3.720375] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 2 [ 3.720379] tegra-xusb 3610000.usb: Host supports USB 3.1 Enhanced SuperSpeed [ 3.721111] hub 1-0:1.0: USB hub found [ 3.721129] hub 1-0:1.0: 4 ports detected [ 3.721492] hub 2-0:1.0: USB hub found [ 3.721504] hub 2-0:1.0: 4 ports detected [ 3.725225] irq: IRQ222: trimming hierarchy from :bus@0:pmc@c360000 [ 3.725522] irq: IRQ223: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [ 3.726015] irq: IRQ224: trimming hierarchy from :bus@0:pmc@c360000 [ 3.726371] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 3.765110] ALSA device list: [ 3.765113] No soundcards found. [ 3.774943] Freeing unused kernel memory: 7488K [ 3.775001] Run /init as init process [ 3.803460] Root device found: initrd [ 3.826697] r8168: loading out-of-tree module taints kernel. [ 3.828758] Mount initrd as rootfs and enter recovery mode [ 3.878235] tegra194-pcie 140a0000.pcie: Adding to iommu group 3 [ 3.991196] tegra194-pcie 140a0000.pcie: host bridge /bus@0/pcie@140a0000 ranges: [ 3.991219] tegra194-pcie 140a0000.pcie: MEM 0x3240000000..0x3527ffffff -> 0x3240000000 [ 3.991229] tegra194-pcie 140a0000.pcie: MEM 0x3528000000..0x352fffffff -> 0x0040000000 [ 3.991241] tegra194-pcie 140a0000.pcie: IO 0x002a100000..0x002a1fffff -> 0x002a100000 [ 3.991747] tegra194-pcie 140a0000.pcie: iATU unroll: enabled [ 3.991752] tegra194-pcie 140a0000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 4.054177] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 4.098236] tegra194-pcie 140a0000.pcie: Link up [ 4.101213] tegra194-pcie 140a0000.pcie: Link up [ 4.101295] tegra194-pcie 140a0000.pcie: PCI host bridge to bus 0008:00 [ 4.101299] pci_bus 0008:00: root bus resource [io 0x0000-0xfffff] (bus address [0x2a100000-0x2a1fffff]) [ 4.101302] pci_bus 0008:00: root bus resource [mem 0x3528000000-0x352fffffff] (bus address [0x40000000-0x47ffffff]) [ 4.101305] pci_bus 0008:00: root bus resource [bus 00-ff] [ 4.101307] pci_bus 0008:00: root bus resource [mem 0x3240000000-0x3527ffffff pref] [ 4.101356] pci 0008:00:00.0: [10de:229c] type 01 class 0x060400 [ 4.101509] pci 0008:00:00.0: PME# supported from D0 D3hot [ 4.104640] pci 0008:01:00.0: [10ec:8168] type 00 class 0x020000 [ 4.104795] pci 0008:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 4.104798] pci 0008:01:00.0: reg 0x10: [io size 0x0100] [ 4.104978] pci 0008:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 4.105094] pci 0008:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 4.106076] pci 0008:01:00.0: supports D1 D2 [ 4.106077] pci 0008:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.120501] pci 0008:00:00.0: BAR 14: assigned [mem 0x3528000000-0x35280fffff] [ 4.120508] pci 0008:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.120512] pci 0008:01:00.0: BAR 4: assigned [mem 0x3528000000-0x3528003fff 64bit] [ 4.120605] pci 0008:01:00.0: BAR 2: assigned [mem 0x3528004000-0x3528004fff 64bit] [ 4.120697] pci 0008:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.120726] pci 0008:00:00.0: PCI bridge to [bus 01-ff] [ 4.120728] pci 0008:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.120732] pci 0008:00:00.0: bridge window [mem 0x3528000000-0x35280fffff] [ 4.120847] pcieport 0008:00:00.0: Adding to iommu group 3 [ 4.121415] pcieport 0008:00:00.0: PME: Signaling with IRQ 190 [ 4.123047] pcieport 0008:00:00.0: AER: enabled with IRQ 190 [ 4.123257] r8168 0008:01:00.0: Adding to iommu group 3 [ 4.123317] r8168 Gigabit Ethernet driver 8.051.02.10m_pll-NAPI loaded [ 4.123376] r8168 0008:01:00.0: enabling device (0000 -> 0003) [ 4.140044] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 4.142101] r8168 Copyright (C) 2022 Realtek NIC software team [ 4.142101] This program comes with ABSOLUTELY NO WARRANTY; for details, please see . [ 4.142101] This is free software, and you are welcome to redistribute it under certain conditions; see . [ 4.142232] tegra194-pcie 14100000.pcie: Adding to iommu group 4 [ 4.145548] tegra194-pcie 14100000.pcie: host bridge /bus@0/pcie@14100000 ranges: [ 4.145560] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 4.145566] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 4.145570] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 4.145832] tegra194-pcie 14100000.pcie: iATU unroll: enabled [ 4.145834] tegra194-pcie 14100000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 4.208997] hub 1-2:1.0: USB hub found [ 4.209456] hub 1-2:1.0: 4 ports detected [ 4.333791] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using tegra-xusb [ 4.384913] hub 2-1:1.0: USB hub found [ 4.385830] hub 2-1:1.0: 4 ports detected [ 5.257117] tegra194-pcie 14100000.pcie: Phy link never came up [ 6.261259] tegra194-pcie 14100000.pcie: Phy link never came up [ 6.261325] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 6.261328] pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x30100000-0x301fffff]) [ 6.261332] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 6.261334] pci_bus 0001:00: root bus resource [bus 00-ff] [ 6.261339] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 6.261383] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 6.261545] pci 0001:00:00.0: PME# supported from D0 D3hot [ 6.266505] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 6.266596] pcieport 0001:00:00.0: Adding to iommu group 4 [ 6.266927] pcieport 0001:00:00.0: PME: Signaling with IRQ 192 [ 6.267840] pcieport 0001:00:00.0: AER: enabled with IRQ 192 [ 6.268112] pci_bus 0001:01: busn_res: [bus 01-ff] is released [ 6.268195] pci 0001:00:00.0: Removing from iommu group 4 [ 6.268204] pci_bus 0001:00: busn_res: [bus 00-ff] is released [ 6.269235] tegra194-pcie 14160000.pcie: Adding to iommu group 5 [ 6.271376] tegra194-pcie 14160000.pcie: host bridge /bus@0/pcie@14160000 ranges: [ 6.271388] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 6.271394] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 6.271399] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 6.271696] tegra194-pcie 14160000.pcie: iATU unroll: enabled [ 6.271698] tegra194-pcie 14160000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 6.378403] tegra194-pcie 14160000.pcie: Link up [ 6.386430] tegra194-pcie 14160000.pcie: Link up [ 6.386480] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 6.386483] pci_bus 0004:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x36100000-0x361fffff]) [ 6.386486] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 6.386488] pci_bus 0004:00: root bus resource [bus 00-ff] [ 6.386490] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 6.386528] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 6.386666] pci 0004:00:00.0: PME# supported from D0 D3hot [ 6.389351] pci 0004:01:00.0: [144d:a80a] type 00 class 0x010802 [ 6.389532] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 6.404603] pci 0004:00:00.0: BAR 14: assigned [mem 0x2428000000-0x24280fffff] [ 6.404609] pci 0004:01:00.0: BAR 0: assigned [mem 0x2428000000-0x2428003fff 64bit] [ 6.404691] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 6.404695] pci 0004:00:00.0: bridge window [mem 0x2428000000-0x24280fffff] [ 6.404781] pcieport 0004:00:00.0: Adding to iommu group 5 [ 6.405217] pcieport 0004:00:00.0: PME: Signaling with IRQ 194 [ 6.406918] pcieport 0004:00:00.0: AER: enabled with IRQ 194 [ 6.407192] tegra194-pcie 141e0000.pcie: Adding to iommu group 6 [ 6.410346] tegra194-pcie 141e0000.pcie: host bridge /bus@0/pcie@141e0000 ranges: [ 6.410365] tegra194-pcie 141e0000.pcie: MEM 0x3000000000..0x3227ffffff -> 0x3000000000 [ 6.410371] tegra194-pcie 141e0000.pcie: MEM 0x3228000000..0x322fffffff -> 0x0040000000 [ 6.410375] tegra194-pcie 141e0000.pcie: IO 0x003e100000..0x003e1fffff -> 0x003e100000 [ 6.410807] tegra194-pcie 141e0000.pcie: iATU unroll: enabled [ 6.410810] tegra194-pcie 141e0000.pcie: Detected iATU regions: 8 outbound, 2 inbound [ 7.521388] tegra194-pcie 141e0000.pcie: Phy link never came up [ 8.524481] tegra194-pcie 141e0000.pcie: Phy link never came up [ 8.524541] tegra194-pcie 141e0000.pcie: PCI host bridge to bus 0007:00 [ 8.524545] pci_bus 0007:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x3e100000-0x3e1fffff]) [ 8.524548] pci_bus 0007:00: root bus resource [mem 0x3228000000-0x322fffffff] (bus address [0x40000000-0x47ffffff]) [ 8.524551] pci_bus 0007:00: root bus resource [bus 00-ff] [ 8.524552] pci_bus 0007:00: root bus resource [mem 0x3000000000-0x3227ffffff pref] [ 8.524593] pci 0007:00:00.0: [10de:229a] type 01 class 0x060400 [ 8.524738] pci 0007:00:00.0: PME# supported from D0 D3hot [ 8.529435] pci 0007:00:00.0: PCI bridge to [bus 01-ff] [ 8.529520] pcieport 0007:00:00.0: Adding to iommu group 6 [ 8.529964] pcieport 0007:00:00.0: PME: Signaling with IRQ 196 [ 8.531951] pcieport 0007:00:00.0: AER: enabled with IRQ 196 [ 8.532211] pci_bus 0007:01: busn_res: [bus 01-ff] is released [ 8.532293] pci 0007:00:00.0: Removing from iommu group 6 [ 8.532302] pci_bus 0007:00: busn_res: [bus 00-ff] is released insmod /lib/modules/5.15.131-rt-tegra/kernel/drivers/nvme/host/nvme-core.ko insmod /lib/modules/5.15.131-rt-tegra/kernel/drivers/nvme/host/nvme.ko [ 8.548670] nvme 0004:01:00.0: Adding to iommu group 5 [ 8.548852] nvme nvme0: pci function 0004:01:00.0 [ 8.548898] nvme 0004:01:00.0: enabling device (0000 -> 0ins002) [ 8.552622] nvme nvme /l0: ib/Shumodtdown timuleeout set to s/510 seconds [ 8t-t.555358] nvme nvmeern0: el/8/0dri/0 verdeft/read/poll queues [ 8.557706] nvme0n1: p1 p2 p3 p4 p5the p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 insmod /lib/modules/5.15.131-rt-tegra/kernel/drivers/hwmon/pwm-fan.ko insmod /lib/modules/5.15.131-rt-tegra/kernel/drivers/usb/gadget/libcomposite.ko insmod /lib/modules/5.15.131-rt-tegra/kernel/drivers/usb/typec/typec.ko insmod /lib/modules/5.15.131-rt-tegra/kernel/drivers/usb/typec/ucsi/typec_ucsi.ko insmod /lib/modules/5.15.131-rt-tegra/kernel/drivers/usb/typec/ucsi/ucsi_ccg.ko insmod /lib/modules/5.15.131-rt-tegra/kernel/drivers/usb/gadget/udc/tegra-xudc.ko insmod /lib/modules/5.15.131-rt-tegra/kernel/net/ipv6/ipv6.ko [ 8.626705] tegra-xudc 3550000.usb: Adding to iommu group 7 insmod /lib/modules/5.15.131-rt-tegra/extra/drivers/staging/platform/tegra/gte/tegra194_gte.ko [ 8.654431] NET: Registered PF_INET6 protocol family [ 8.654857] Segment Routing with IPv6 [ 8.654864] In-situ OAM (IOAM) with IPv6 [ 8.657589] tegra194_gte: minsmodle ib/modifiulecation.15 fa.13sig1-rnata/extrd/or rers/nvired kpps/nvppsg - taint ing kernel insmod /lib/modules/5.15.131-rt-tegra/extra/drivers/net/ethernet/nvidia/nvethernet/nvethernet.ko insmod /lib/modules/5.15.131-rt-tegra/kernel/drivers/usb/typec/stusb160x.ko insmod /lib/modules/5.15.131-rt-tegra/extra/drivers/platform/tegra/mce/tegra-mce.ko [ 8.699302] tegra-qspi 3270000.spi: Adding to iommu group 8 [ 8.699940] tegra-qspi 3270000.spi: Prod config not found for QSPI: -19 [ 8.700920] spi-nor spi0.0: mx25u51279g (65536 Kbytes) [ 69.799801] using random self ethernet address [ 69.799808] using random host ethernet address [ 69.807098] Mass Storage Function, version: 2009/09/11 [ 69.807103] LUN: removable file: (no medium) [ 69.808424] LUN: removable file: (no medium) [ 69.809515] LUN: removable file: (no medium) [ 69.810610] LUN: removable file: (no medium) Add /dev/nvme0n1 [ 69.813108] usb0: HOST MAC 3e:cd:56:e3:4a:1f [ 69.813112] usb0: MAC ae:7b:19:d8:46:f8 [ 69.815258] tegra-xudc 3550000.usb: EP 0 (type: ctrl, dir: out) enabled bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash-5.1# [ 70.337367] tegra-xudc 3550000.usb: EP 5 (type: intr, dir: in) enabled [ 70.337385] tegra-xudc 3550000.usb: EP 3 (type: bulk, dir: in) enabled [ 70.337396] tegra-xudc 3550000.usb: EP 2 (type: bulk, dir: out) enabled [ 70.337485] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 70.337613] tegra-xudc 3550000.usb: EP 7 (type: bulk, dir: in) enabled [ 70.337628] tegra-xudc 3550000.usb: EP 4 (type: bulk, dir: out) enabled [ 322.880612] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 799.848735] tegra194-pcie 140a0000.pcie: Link didn't transition to L2 state [ 799.891391] tegra-xusb 3610000.usb: Firmware timestamp: 2023-02-10 03:48:10 UTC [ 800.019932] arm-smmu 12000000.iommu: disabling translation [ 800.020020] arm-smmu 8000000.iommu: disabling translation [ 800.020117] reboot: Restarting system ����Shutdown state requested 1 Rebooting system ... �� [0000.062] I> MB1 (version: 1.4.0.1-t234-54845784-08e631ca) [0000.067] I> t234-A01-0-Silicon (0x12347) Prod [0000.072] I> Boot-mode : Coldboot [0000.075] I> Entry timestamp: 0x00000000 [0000.079] I> last_boot_error: 0x0 [0000.082] I> BR-BCT: preprod_dev_sign: 0 [0000.086] I> rst_source: 0xb, rst_level: 0x1 [0000.090] I> Task: SE error check [0000.093] I> Task: Bootchain select WAR set [0000.097] I> Task: Enable SLCG [0000.100] I> Task: CRC check [0000.103] I> Task: Initialize MB2 params [0000.107] I> MB2-params @ 0x40060000 [0000.110] I> Task: Crypto init [0000.113] I> Task: Perform MB1 KAT tests [0000.117] I> Task: NVRNG health check [0000.121] I> NVRNG: Health check success [0000.124] I> Task: MSS Bandwidth limiter settings for iGPU clients [0000.130] I> Task: Enabling and initialization of Bandwidth limiter [0000.137] I> No request to configure MBWT settings for any PC! [0000.142] I> Task: Secure debug controls [0000.146] I> Task: strap war set [0000.149] I> Task: Initialize SOC Therm [0000.153] I> Task: Program NV master stream id [0000.157] I> Task: Verify boot mode [0000.163] I> Task: Alias fuses [0000.166] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.173] I> Task: Print SKU type [0000.176] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0000.181] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0000.186] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0000.190] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.194] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0000.199] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0000.203] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0000.207] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0000.212] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.216] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.220] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.224] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.228] I> FUSE_SKU_INFO_0 = 0xd3 [0000.232] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.236] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.239] I> SKU: Prod [0000.242] I> Task: Boost clocks [0000.245] I> Initializing NAFLL for BPMP_CPU_NIC. [0000.250] I> BPMP NAFLL: fll_lock = 1, dvco_min_reached = 0 [0000.255] I> BPMP NAFLL lock success. [0000.259] I> BPMP_CPU_NIC : src = 42, divisor = 0 [0000.263] I> Initializing PLLC2 for AXI_CBB. [0000.267] I> AXI_CBB : src = 35, divisor = 0 [0000.272] I> Task: Voltage monitor [0000.275] I> VMON: Vmon re-calibration and fine tuning done [0000.280] I> Task: UPHY init [0000.285] I> HSIO UPHY init done [0000.288] W> Skipping GBE UPHY config [0000.292] I> Task: Boot device init [0000.295] I> Boot_device: QSPI_FLASH instance: 0 [0000.300] I> Qspi clock source : pllc_out0 [0000.304] I> QSPI Flash: Macronix 64MB [0000.307] I> QSPI-0l initialized successfully [0000.312] I> Task: TSC init [0000.314] I> Task: Load membct [0000.317] I> RAM_CODE 0x4000001 [0000.320] I> Loading MEMBCT [0000.323] I> Slot: 0 [0000.325] I> Binary[0] block-3840 (partition size: 0x40000) [0000.331] I> Binary name: MEM-BCT-0 [0000.334] I> Size of crypto header is 8192 [0000.338] I> Size of crypto header is 8192 [0000.342] I> strt_pg_num(3840) num_of_pgs(16) read_buf(0x40050000) [0000.348] I> BCH of MEM-BCT-0 read from storage [0000.352] I> BCH address is : 0x40050000 [0000.356] I> MEM-BCT-0 header integrity check is success [0000.361] I> Binary magic in BCH component 0 is MEM0 [0000.366] I> component binary type is 0 [0000.370] I> strt_pg_num(3856) num_of_pgs(115) read_buf(0x40040000) [0000.377] I> MEM-BCT-0 binary is read from storage [0000.382] I> MEM-BCT-0 binary integrity check is success [0000.387] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.393] I> RAM_CODE 0x4000001 [0000.399] I> RAM_CODE 0x4000001 [0000.402] I> Task: Load Page retirement list [0000.407] I> Task: SDRAM params override [0000.410] I> Task: Save mem-bct info [0000.414] I> Task: Carveout allocate [0000.417] I> RCM blob carveout will not be allocated [0000.422] I> Update CCPLEX IST carveout from MB1-BCT [0000.427] I> ECC region[0]: Start:0x0, End:0x0 [0000.431] I> ECC region[1]: Start:0x0, End:0x0 [0000.435] I> ECC region[2]: Start:0x0, End:0x0 [0000.440] I> ECC region[3]: Start:0x0, End:0x0 [0000.444] I> ECC region[4]: Start:0x0, End:0x0 [0000.448] I> Non-ECC region[0]: Start:0x80000000, End:0x480000000 [0000.454] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.459] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.463] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.468] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.479] I> allocated(CO:43) base:0xbe000000 size:0x4000000 align: 0x200000 [0000.486] I> allocated(CO:39) base:0x47de00000 size:0x2200000 align: 0x10000 [0000.493] I> allocated(CO:20) base:0x47a000000 size:0x2000000 align: 0x2000000 [0000.500] I> allocated(CO:24) base:0x478000000 size:0x2000000 align: 0x2000000 [0000.507] I> allocated(CO:28) base:0x476000000 size:0x2000000 align: 0x2000000 [0000.514] I> allocated(CO:22) base:0x47c000000 size:0x1000000 align: 0x1000000 [0000.521] I> allocated(CO:35) base:0x475000000 size:0x1000000 align: 0x100000 [0000.528] I> allocated(CO:02) base:0x47d000000 size:0x800000 align: 0x800000 [0000.535] I> allocated(CO:03) base:0x474800000 size:0x800000 align: 0x800000 [0000.542] I> allocated(CO:06) base:0x474000000 size:0x800000 align: 0x800000 [0000.549] I> allocated(CO:56) base:0x473800000 size:0x800000 align: 0x200000 [0000.556] I> allocated(CO:07) base:0x47d800000 size:0x400000 align: 0x400000 [0000.563] I> allocated(CO:33) base:0x473400000 size:0x400000 align: 0x200000 [0000.570] I> allocated(CO:19) base:0x473180000 size:0x280000 align: 0x10000 [0000.577] I> allocated(CO:23) base:0x47dc00000 size:0x200000 align: 0x200000 [0000.584] I> allocated(CO:01) base:0x473000000 size:0x100000 align: 0x100000 [0000.591] I> allocated(CO:05) base:0x472f00000 size:0x100000 align: 0x100000 [0000.597] I> allocated(CO:08) base:0x472e00000 size:0x100000 align: 0x100000 [0000.604] I> allocated(CO:09) base:0x472d00000 size:0x100000 align: 0x100000 [0000.611] I> allocated(CO:12) base:0x472c00000 size:0x100000 align: 0x100000 [0000.618] I> allocated(CO:15) base:0x472b00000 size:0x100000 align: 0x100000 [0000.625] I> allocated(CO:17) base:0x472a00000 size:0x100000 align: 0x100000 [0000.632] I> allocated(CO:27) base:0x472900000 size:0x100000 align: 0x100000 [0000.639] I> allocated(CO:42) base:0x472800000 size:0x100000 align: 0x100000 [0000.646] I> allocated(CO:54) base:0x473100000 size:0x80000 align: 0x80000 [0000.653] I> allocated(CO:34) base:0x4727f0000 size:0x10000 align: 0x10000 [0000.660] I> allocated(CO:72) base:0x4725f0000 size:0x200000 align: 0x10000 [0000.666] I> allocated(CO:47) base:0x472000000 size:0x400000 align: 0x200000 [0000.673] I> allocated(CO:50) base:0x471e00000 size:0x200000 align: 0x100000 [0000.680] I> allocated(CO:48) base:0x4725d0000 size:0x20000 align: 0x10000 [0000.687] I> allocated(CO:69) base:0x4725b0000 size:0x20000 align: 0x10000 [0000.694] I> allocated(CO:49) base:0x4725a0000 size:0x10000 align: 0x10000 [0000.701] I> NSDRAM base: 0x80000000, end: 0x4725f0000, size: 0x3f25f0000 [0000.707] I> Task: Thermal check [0000.710] I> max_chip_limit = 105 [0000.714] I> min_chip_limit = -28 [0000.717] I> max temp read = 43 [0000.720] I> min temp read = 40 [0000.723] I> Task: Update FSI SCR with thermal fuse data [0000.728] I> Task: Enable WDT 5th expiry [0000.732] I> Task: I2C register [0000.735] I> Task: Set I2C bus freq [0000.738] I> Task: Reset FSI [0000.741] I> Task: Pinmux init [0000.744] I> skipped mmio_addr = 0x9240008 [0000.748] I> skipped mmio_addr = 0x9240000 [0000.752] I> skipped mmio_addr = 0x9240010 [0000.756] I> skipped mmio_addr = 0x9240018 [0000.760] I> skipped mmio_addr = 0x9240020 [0000.764] I> skipped mmio_addr = 0x9240030 [0000.767] I> skipped mmio_addr = 0x9240028 [0000.771] I> skipped mmio_addr = 0x9240038 [0000.775] I> skipped mmio_addr = 0x9240040 [0000.779] I> skipped mmio_addr = 0x9240048 [0000.783] I> skipped mmio_addr = 0x9241000 [0000.787] I> skipped mmio_addr = 0x9241008 [0000.791] I> skipped mmio_addr = 0x9241010 [0000.795] I> skipped mmio_addr = 0x9241018 [0000.799] I> skipped mmio_addr = 0x9241020 [0000.803] I> skipped mmio_addr = 0x9241028 [0000.807] I> skipped mmio_addr = 0x9241030 [0000.811] I> skipped mmio_addr = 0x9241038 [0000.815] I> skipped mmio_addr = 0x9241040 [0000.819] I> skipped mmio_addr = 0x9242000 [0000.823] I> skipped mmio_addr = 0x9242008 [0000.827] I> Task: Prod config init [0000.830] I> Task: Pad voltage init [0000.833] I> Task: Prod init [0000.836] I> Task: Program rst req config reg [0000.840] I> Task: Common rail init [0000.844] I> DONE: Thermal config [0000.847] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.856] I> DONE: SOC rail config [0000.859] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.866] I> DONE: MEMIO rail config [0000.870] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT. [0000.876] I> DONE: GPU rail info [0000.879] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT. [0000.886] I> DONE: CV rail info [0000.888] I> Task: Mem clock src [0000.892] I> Task: Misc. board config [0000.896] I> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.901] I> Task: SDRAM init [0000.904] I> MemoryType: 4 MemBctRevision: 1 [0000.911] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0000.918] I> MSS CAR: Init PLLM [0000.921] I> MSS CAR: Init PLLHUB [0000.926] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.937] I> SDRAM initialized! [0000.940] I> SDRAM Size in Total 0x400000000 [0000.945] I> Task: Dram Ecc scrub [0000.948] I> Task: DRAM alias check [0000.957] I> Task: Program NSDRAM carveout [0000.961] I> NSDRAM carveout encryption is enabled [0000.966] I> Program NSDRAM carveout [0000.970] I> Task: Register checker [0000.973] I> Task: Enable clock-mon [0000.977] I> FMON: Fmon re-programming done [0000.981] I> Task: Mapper init [0000.984] I> Task: SC7 Context Init [0000.987] I> Task: CCPLEX IST init [0000.991] I> Task: CPU WP0 [0000.993] I> Loading MCE [0000.996] I> Slot: 0 [0000.998] I> Binary[8] block-22784 (partition size: 0x80000) [0001.003] I> Binary name: MCE [0001.006] I> Size of crypto header is 8192 [0001.010] I> Size of crypto header is 8192 [0001.014] I> strt_pg_num(22784) num_of_pgs(16) read_buf(0x4003e000) [0001.020] I> BCH of MCE read from storage [0001.024] I> BCH address is : 0x4003e000 [0001.028] I> MCE header integrity check is success [0001.033] I> Binary magic in BCH component 0 is MTSM [0001.037] I> component binary type is 8 [0001.041] I> Size of crypto header is 8192 [0001.045] I> strt_pg_num(22800) num_of_pgs(350) read_buf(0x40000000) [0001.053] I> MCE binary is read from storage [0001.058] I> MCE binary integrity check is success [0001.062] I> Binary MCE loaded successfully at 0x40000000 (0x2baf0) [0001.068] I> Size of crypto header is 8192 [0001.080] I> Size of crypto header is 8192 [0001.083] I> Sending WP0 mailbox command to PSC [0001.093] I> Task: XUSB Powergate [0001.096] I> Skipping powergate XUSB. [0001.099] I> Task: MB1 fixed firewalls [0001.106] W> Firewall readback mismatch [0001.111] I> Task: Load bpmp-fw [0001.114] I> Slot: 0 [0001.116] I> Binary[15] block-9984 (partition size: 0x180000) [0001.121] I> Binary name: BPMP_FW [0001.124] I> Size of crypto header is 8192 [0001.128] I> Size of crypto header is 8192 [0001.132] I> strt_pg_num(9984) num_of_pgs(16) read_buf(0x807fe000) [0001.138] I> BCH of BPMP_FW read from storage [0001.143] I> BCH address is : 0x807fe000 [0001.146] I> BPMP_FW header integrity check is success [0001.151] I> Binary magic in BCH component 0 is BPMF [0001.156] I> component binary type is 15 [0001.160] I> Size of crypto header is 8192 [0001.164] I> strt_pg_num(10000) num_of_pgs(2017) read_buf(0x80000000) [0001.182] I> BPMP_FW binary is read from storage [0001.188] I> BPMP_FW binary integrity check is success [0001.193] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfc080) [0001.199] I> Slot: 0 [0001.201] I> Binary[16] block-13056 (partition size: 0x400000) [0001.207] I> Binary name: BPMP_FW_DTB [0001.211] I> Size of crypto header is 8192 [0001.215] I> Size of crypto header is 8192 [0001.219] I> strt_pg_num(13056) num_of_pgs(16) read_buf(0x807fc000) [0001.225] I> BCH of BPMP_FW_DTB read from storage [0001.229] I> BCH address is : 0x807fc000 [0001.233] I> BPMP_FW_DTB header integrity check is success [0001.238] I> Binary magic in BCH component 0 is BPMD [0001.243] I> component binary type is 16 [0001.247] I> Size of crypto header is 8192 [0001.251] I> strt_pg_num(13072) num_of_pgs(499) read_buf(0x807bd9f0) [0001.260] I> BPMP_FW_DTB binary is read from storage [0001.265] I> BPMP_FW_DTB binary integrity check is success [0001.271] I> Binary BPMP_FW_DTB loaded successfully at 0x807bd9f0 (0x3e540) [0001.278] I> Task: BPMP fw ast config [0001.281] I> Task: Load psc-fw [0001.284] I> Slot: 0 [0001.286] I> Binary[17] block-21248 (partition size: 0xc0000) [0001.292] I> Binary name: PSC_FW [0001.295] I> Size of crypto header is 8192 [0001.299] I> Size of crypto header is 8192 [0001.303] I> strt_pg_num(21248) num_of_pgs(16) read_buf(0x80ffe000) [0001.309] I> BCH of PSC_FW read from storage [0001.313] I> BCH address is : 0x80ffe000 [0001.317] I> PSC_FW header integrity check is success [0001.322] I> Binary magic in BCH component 0 is PFWP [0001.326] I> component binary type is 17 [0001.330] I> Size of crypto header is 8192 [0001.334] I> strt_pg_num(21264) num_of_pgs(591) read_buf(0x80fb4200) [0001.344] I> PSC_FW binary is read from storage [0001.349] I> PSC_FW binary integrity check is success [0001.354] I> Binary PSC_FW loaded successfully at 0x80fb4200 (0x49df0) [0001.360] I> Task: Load nvdec-fw [0001.363] I> Slot: 0 [0001.365] I> Binary[7] block-6400 (partition size: 0x100000) [0001.371] I> Binary name: NVDEC [0001.374] I> Size of crypto header is 8192 [0001.378] I> Size of crypto header is 8192 [0001.381] I> strt_pg_num(6400) num_of_pgs(16) read_buf(0x800fe000) [0001.388] I> BCH of NVDEC read from storage [0001.392] I> BCH address is : 0x800fe000 [0001.395] I> NVDEC header integrity check is success [0001.400] I> Binary magic in BCH component 0 is NDEC [0001.405] I> component binary type is 7 [0001.409] I> Size of crypto header is 8192 [0001.413] I> strt_pg_num(6416) num_of_pgs(560) read_buf(0x80000000) [0001.422] I> NVDEC binary is read from storage [0001.427] I> NVDEC binary integrity check is success [0001.432] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0001.438] I> Size of crypto header is 8192 [0001.449] I> Task: Load tsec-fw [0001.452] I> TSEC-FW load support not enabled [0001.457] I> Task: GPIO interrupt map [0001.460] I> Task: SC7 context save [0001.464] I> Slot: 0 [0001.466] I> Binary[27] block-0 (partition size: 0x100000) [0001.471] I> Binary name: BR_BCT [0001.474] I> Size of crypto header is 8192 [0001.478] I> Size of crypto header is 8192 [0001.482] I> Size of crypto header is 8192 [0001.486] I> strt_pg_num(0) num_of_pgs(16) read_buf(0xa0000000) [0001.492] I> BR_BCT binary is read from storage [0001.496] I> BR_BCT binary integrity check is success [0001.501] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.507] I> Slot: 0 [0001.509] I> Binary[13] block-23808 (partition size: 0x30000) [0001.515] I> Binary name: SC7-FW [0001.518] I> Size of crypto header is 8192 [0001.522] I> Size of crypto header is 8192 [0001.526] I> Size of crypto header is 8192 [0001.530] I> Size of crypto header is 8192 [0001.534] I> strt_pg_num(23808) num_of_pgs(16) read_buf(0xa0002000) [0001.540] I> BCH of SC7-FW read from storage [0001.544] I> BCH address is : 0xa0002000 [0001.548] I> SC7-FW header integrity check is success [0001.553] I> Binary magic in BCH component 0 is WB0B [0001.558] I> component binary type is 13 [0001.561] I> Size of crypto header is 8192 [0001.565] I> strt_pg_num(23824) num_of_pgs(347) read_buf(0xa0004000) [0001.574] I> SC7-FW binary is read from storage [0001.578] I> SC7-FW binary integrity check is success [0001.583] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x2b440) [0001.590] I> Slot: 0 [0001.592] I> Binary[22] block-24192 (partition size: 0x30000) [0001.597] I> Binary name: PSC_RF [0001.600] I> Size of crypto header is 8192 [0001.604] I> Size of crypto header is 8192 [0001.608] I> Size of crypto header is 8192 [0001.612] I> Size of crypto header is 8192 [0001.616] I> strt_pg_num(24192) num_of_pgs(16) read_buf(0xa002f440) [0001.622] I> BCH of PSC_RF read from storage [0001.626] I> BCH address is : 0xa002f440 [0001.630] I> PSC_RF header integrity check is success [0001.635] I> Binary magic in BCH component 0 is PSCR [0001.640] I> component binary type is 22 [0001.644] I> Size of crypto header is 8192 [0001.648] I> strt_pg_num(24208) num_of_pgs(224) read_buf(0xa0031440) [0001.655] I> PSC_RF binary is read from storage [0001.660] I> PSC_RF binary integrity check is success [0001.665] I> Binary PSC_RF loaded successfully at 0xa0031440 (0x1be60) [0001.674] I> Task: Save WP0 payload to SC7 ctx [0001.678] I> Task: Load MB2rf binary to SC7 ctx [0001.683] I> Slot: 0 [0001.685] I> Binary[14] block-24576 (partition size: 0x20000) [0001.690] I> Binary name: MB2_RF [0001.693] I> Size of crypto header is 8192 [0001.697] I> Size of crypto header is 8192 [0001.701] I> Size of crypto header is 8192 [0001.705] I> Size of crypto header is 8192 [0001.709] I> strt_pg_num(24576) num_of_pgs(16) read_buf(0xa00d5d10) [0001.715] I> BCH of MB2_RF read from storage [0001.719] I> BCH address is : 0xa00d5d10 [0001.723] I> MB2_RF header integrity check is success [0001.728] I> Binary magic in BCH component 0 is MB2R [0001.733] I> component binary type is 14 [0001.737] I> Size of crypto header is 8192 [0001.741] I> strt_pg_num(24592) num_of_pgs(223) read_buf(0xa00d7d10) [0001.748] I> MB2_RF binary is read from storage [0001.753] I> MB2_RF binary integrity check is success [0001.758] I> Binary MB2_RF loaded successfully at 0xa00d7d10 (0x1bd90) [0001.764] I> Task: Save fuse alias data to SC7 ctx [0001.769] I> Task: Save PMIC data to SC7 ctx [0001.773] I> Task: Save Pinmux data to SC7 ctx [0001.777] I> Task: Save Pad Voltage data to SC7 ctx [0001.782] I> Task: Save controller prod data to SC7 ctx [0001.787] I> Task: Save prod cfg data to SC7 ctx [0001.791] I> Task: Save I2C bus freq data to SC7 ctx [0001.796] I> Task: Save SOCTherm data to SC7 ctx [0001.801] I> Task: Save FMON data to SC7 ctx [0001.805] I> Task: Save VMON data to SC7 ctx [0001.809] I> Task: Save TZDRAM data to SC7 ctx [0001.813] I> Task: Save GPIO int data to SC7 ctx [0001.818] I> Task: Save clock data to SC7 ctx [0001.822] I> Task: Save debug data to SC7 ctx [0001.826] I> Task: Save MBWT data to SC7 ctx [0001.834] I> SC7 context save done [0001.837] I> Task: Load MB2/Applet/FSKP [0001.841] I> Loading MB2 [0001.843] I> Slot: 0 [0001.845] I> Binary[6] block-8448 (partition size: 0x80000) [0001.851] I> Binary name: MB2 [0001.854] I> Size of crypto header is 8192 [0001.858] I> Size of crypto header is 8192 [0001.861] I> strt_pg_num(8448) num_of_pgs(16) read_buf(0x8007e000) [0001.868] I> BCH of MB2 read from storage [0001.871] I> BCH address is : 0x8007e000 [0001.875] I> MB2 header integrity check is success [0001.880] I> Binary magic in BCH component 0 is MB2B [0001.885] I> component binary type is 6 [0001.888] I> Size of crypto header is 8192 [0001.892] I> strt_pg_num(8464) num_of_pgs(845) read_buf(0x80000000) [0001.903] I> MB2 binary is read from storage [0001.908] I> MB2 binary integrity check is success [0001.913] I> Binary MB2 loaded successfully at 0x80000000 (0x69900) [0001.919] I> Task: Map CCPLEX SHARED carveout [0001.923] I> Task: Prepare MB2 params [0001.927] I> Task: Dram ecc test [0001.930] I> Task: Misc NV security settings [0001.934] I> NVDEC sticky bits programming done [0001.939] I> Successfully powergated NVDEC [0001.943] I> Task: Disable/Reload WDT [0001.946] I> Task: Program misc carveouts [0001.950] I> Program IPC carveouts [0001.954] I> Task: Disable SCPM/POD reset [0001.957] I> SLCG Global override status := 0x0 [0001.962] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-c6a05a9f) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x001e6274 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x473800000, size:0x800000] I> Task: SE error check I> Task: Crypto init I> Task: MB2 Params integrity check I> Task: ARI update carveout TZDRAM I> Task: Configure OEM set LA/PTSA values I> Task: Check MC errors I> Task: Enable hot-plug capability I> Task: PSC mailbox init I> Task: Enable clock for external modules I> Task: OEM SC7 context save init I> Task: I2C register I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout I> Task: Program CBB PCIE AMAP regions I> Task: Boot device init I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI Flash: Macronix 64MB I> QSPI-0l initialized successfully I> Secondary storage device: QSPI_FLASH instance: 0 I> Secondary storage device: NVME instance: 4 I> Initializing nvme device instance 4 I> Initializing nvme controller I> tegrabl_pcie_soc_preinit: (4): I> Unpowergate I> PCIE unpowergating successful (PCIEX1A) I> PCIE unpowergating successful (PCIEX4BB) I> tegrabl_pcie_soc_init: (4): I> APPL initialization ... I> PCIe controller-4 link is up I> tegra_pcie_info[4].cfg0_base = 0x36000000 I> tegra_pcie_info[4].cfg1_base = 36020000 I> tegra_pcie_info[4].atu_dma_base = 0x36040000 I> tegra_pcie_bus[4].mem = 0x36200000 I> Scanning busnr: 0 devfn: 0 I> PCIe IDs: 0x229c10de I> PCIe RID_CC: 0x60400a1 I> Scanning busnr: 1 devfn: 0 I> PCIe IDs: 0xa80a144d I> PCIe RID_CC: 0x1080200 I> PCI Config: I/O=0x36100000, Memory=0x36200000 I> MEM64 bar_num=0 bar=0x36200000 I> Number of PCIe devices detected: 2 I> NVME page size: 4096 I> NVMe serial number: S5P2NL0W213504K I> NVMe model number: Samsung SSD 980 PRO 1TB I> NVMe firmware revision: 5B2QGXA7 I> block_count: 1953525168 I> supported_lba: 0 I> block_size_log2: 0x9 I> tegrabl_create_io_queue_cmd: queue size: 2 I> tegrabl_create_io_queue_cmd: queue size: 2 I> nvme device id 000c0004 I> Task: Partition Manager Init I> strt_pg_num(1) num_of_pgs(1) read_buf(0x473808000) I> strt_pg_num(131071) num_of_pgs(1) read_buf(0x473808000) I> strt_pg_num(131039) num_of_pgs(32) read_buf(0x473808200) I> Found 60 partitions in QSPI_FLASH (instance 0) I> Found 15 partitions in NVME (instance 4) I> Task: Pass DRAM ECC PRL Flag to FSI I> Task: Load and authenticate registered FWs I> Task: Load AUXP FWs I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Successfully register PVA FW load task with MB2 loader I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> strt_pg_num(55040) num_of_pgs(16) read_buf(0x40066650) I> strt_pg_num(55056) num_of_pgs(512) read_buf(0x472e00000) I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> strt_pg_num(56192) num_of_pgs(16) read_buf(0x40066650) I> strt_pg_num(56208) num_of_pgs(880) read_buf(0x472a00000) I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x472e00000 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> strt_pg_num(44800) num_of_pgs(16) read_buf(0x40066650) I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x472a00000 I> Successfully register RCE FW context save task with MB2 loader I> dce : oem authentication of header done I> strt_pg_num(44816) num_of_pgs(1) read_buf(0x473800090) I> strt_pg_num(44816) num_of_pgs(8) read_buf(0x473947058) I> dce : meta-blob integrity check is success. I> strt_pg_num(44824) num_of_pgs(512) read_buf(0x473807040) I> strt_pg_num(45336) num_of_pgs(512) read_buf(0x473847040) I> dce : will be decompressed at 0x47a000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> strt_pg_num(45848) num_of_pgs(512) read_buf(0x473887040) I> dce : decompressed to 12056320 bytes I> dce: plain binary integrity check is success I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> strt_pg_num(58240) num_of_pgs(16) read_buf(0x40066650) I> strt_pg_num(58256) num_of_pgs(800) read_buf(0x47d800000) I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x47a000000 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> strt_pg_num(9472) num_of_pgs(16) read_buf(0x40066650) I> strt_pg_num(9488) num_of_pgs(312) read_buf(0x472f00000) I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x47d800000 I> Successfully register APE FW context save task with MB2 loader I> Partition name: A_pva-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-62336 (partition size: 0x40000), name: A_pva-fw I> strt_pg_num(62336) num_of_pgs(16) read_buf(0x40066650) I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x472f00000 I> Successfully register XUSB FW context save task with MB2 loader I> pva-fw : oem authentication of header done I> strt_pg_num(62352) num_of_pgs(1) read_buf(0x473800090) I> strt_pg_num(62352) num_of_pgs(8) read_buf(0x473947058) I> pva-fw : meta-blob integrity check is success. I> strt_pg_num(62360) num_of_pgs(512) read_buf(0x473807040) I> pva-fw : will be decompressed at 0x473180000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> pva-fw : decompressed to 2156512 bytes I> pva-fw: plain binary integrity check is success I> pva-fw: Authentication Finalize Done I> Binary pva-fw loaded successfully at 0x473180000 I> Successfully register PVA FW context save task with MB2 loader I> Task: Check MC errors I> Task: Carveout setup I> Program remaining OEM carveouts I> Task: Enable FSITHERM I> Task: Enable FSI VMON I> Task: Validate FSI Therm readings I> Task: Restore XUSB sec I> Task: Enable FSI SE clock I> Task: Initialize SBSA UART CAR I> Task: Initialize CPUBL Params I> CPUBL-params @ 0x476000000 I> Task: Ratchet update W> Skip ratchet update - OPTIN fuse not set I> Task: Prepare eeprom data I> Task: FSI padctl context save W> Skipping FSI padctl config save: fsi not enabled I> Task: Unpowergate APE W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: Memctrl reconfig pending clients I> Task: OEM firewalls I> OEM firewalls configured I> Task: Powergate APE I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings I> Task: Unhalt AUXPs I> Unhalting SPE.. I> Enabling combined UART ����spe: early_init ����vic initialized ����tsc initialized ����aon lic initialized ����spe: tag is 5243985d1b1eb3f06fac6d36bd7e74ac ����spe: SafeRTOS v8.4 ����spe: init ����scheduler initialized ����aon hsp initialized ����tag initialized ����tcu initialized ����bpmp ipc initialized ����spe: late init ����cpu_nic clock initialized ����apb clock initialized ����pm initialized ����bpmp hsp initialized ����top1 hsp initialized ����ccplex ipc initialized ����spe: start scheduler ���� I> Task: Trigger mailbox for PSC-BL1 exit I> Sending opcode 0x4d420802 to psc I> Received ACK from psc I> Task: Start secure NOR provision I> Skip Secure NOR provisioning I> Task: Trigger load FSI keyblob I> Task: Complete load FSI keyblob I> Task: MB2-PSC_FW Key Manager Init I> Sending opcode OP_PSC_KEY_MANAGER to psc-fw I> Sending opcode 0x4b45594d to psc �� hwwdt_init: WDT boot cfg 0x710010 sts 0x10 bpmp: socket 0 bpmp: base binary md5 is ac83764aab09e08198fdb2c012af5bb1 bpmp: combined binary md5 is e350806227175366b0bd9b0224627752 bpmp: firmware tag is e350806227175366b0bd-ac83764aab0 Write control check for CBB_CENTRAL_CBB_FIREWALL_PWM7_BLF failed, expected value: 00100008 != actual value: 0010000a address: 13a178a8 initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early initialized pm 465 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ��I> Received ACK from psc I> Task: Unhalt FSI I> FSI unhalt skipped I> Task: Unhalt AUXPs��initialized avfs_clk_platform initialized powergate �� I> SCE unhalt skip��initialized dvs initialized clk_mach_config suspend progress: 0x0 initialized suspend initialized strap initialized mce_dbell ��ped I> Unhalting RCE I> RCE unhalt successful I> Unhalting DCE I> DCE unhalt successful I> APE unhalt skipped I> Task: Load HV/CPUBL I> Task: Load TOS I> Task: Trigger load TSEC leyblob I> Sending opcode 0x53535452 to psc I> Sent opcode to psc I> Task: Load and authenticate registered FWs I> Partition name: A_cpu-bootloader I> Size of partition: 3670016 I> Binary@ device:3/0 block-24832 (part��[ 2.824440] Camera-FW on t234-rce-safe started ��iti��TCU early console enabled. ��initialized emc initialized emc_mrq ��on size: 0x3��initialized clk_cal initialized uphy_dt initialized uphy_mrq HSIO UPHY reset has been de-asserted 0x0 initialized uphy �� ��80000), name: A_cpu-boot��initialized pg_late initialized pg_mrq_init swdtimer_init: reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ��DCE Started DCE_R5_In��loader ��it MPU enabled DCE_SW_Init ��I> strt_pg_num(24832) num_of_pgs(��initialized clk_cal_late initialized noc_late initialized cvc ��16) read_buf(0x40066650) I> str��initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/2 have not matching zones 0/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zones 0/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/0 have not matching zones 1/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zones 1/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zones 2/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zones 2/1 initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable pwm3 enable sdmmc4_axicif enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp enable pex1_c6_core��[ 3.028456] Camera-FW on t234-rce-safe ready SHA1=e2238c99 (crt 21.769 ms,�� enable pex2_c7_core enable pex2_c8_core enable pex2_c9_core enable pex2_c10_core enable pex0_c0_core enable pex0_c1_core enable pex0_c2_core enable pex0_c3_core enable pex0_c4_core enable pex1_c5_core initialized clk_mach_post�� total boot 226.857 ms) �� initialized pg_post initialized regulator_post initialized profile initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete ��t_pg_num(24848) num_of_p��Admin Task Init Admin Task Init complete Print Task Init RM Task Init SHA Task Init Admin Task Started DCE SC7 SHA Enabled RM Task Started RM Task Running Print Task Started Print Task Running SHA Task Started DCE: FW Boot Complete Admin Task Running SHA Task Running ��gs(6800) read_buf(0x472000000) I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os I> strt_pg_num(32000) num_of_pgs(16) read_buf(0x40066650) I> strt_pg_num(32016) num_of_pgs(2560) read_buf(0xc1dc0000) I> MB2-params @ 0x40060000 I> NSDRAM carveout base: 0x80000000, size: 0x3f25f0000 I> cpubl_params: nsdram: carveout: 1, encryption: 1 I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0x472000000 I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0xc1dc0000 I> Relocating OP-TEE dtb from: 0xc1eff0f0 to 0xbe040020, size: 0x2837 I> [0] START: 0x80000000, SIZE: 0x3f25f0000 I> [1] START: 0x476000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> strt_pg_num(44288) num_of_pgs(16) read_buf(0x40066650) I> strt_pg_num(44304) num_of_pgs(8) read_buf(0xbe020000) I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0xbe020000 I> EKB detected (length: 0x410) @ VA:0xbe020000 I> Task: Add cpubl params integrity check I> Added cpubl params digest. I> Task: Prepare TOS params I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0xbe040020 I> NVRNG: Health check success I> NVRNG: Health check success I> Task: OEM SC7 context save I> OEM sc7 context saved I> Task: Disable MSS perf stats I> Task: Program display sticky bits I> Task: Storage device deinit I> Task: SMMU external bypass disable I> Task: SMMU init I> Task: Program GICv3 registers I> Task: Audit firewall settings I> Task: Bootchain failure check I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> Task: Burn RESERVED_ODM0 fuse I> Task: Lock fusing I> Task: Clear dec source key I> MB2 finished ��NOTICE: BL31: v2.8(release):8a7f432be NOTICE: BL31: Built : 10:30:22, Nov 30 2023 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.22 (gcc version 11.3.0 (Buildroot 2022.08)) #2 Thu Nov 30 18:39:35 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Test OEM keys are being used. This is insecure for shipping products! I/TC: Primary CPU switching to normal world boot �� Jetson UEFI firmware (version 36.2.0-gcid-34956989 built on 2023-11-30T18:35:35+00:00) ��I/TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled �� ��[ 5.265257] Camera-FW on t234-rce-safe started TCU early console enabled. �� ��[ 5.312576] Camera-FW on t234-rce-safe ready SHA1=e2238c99 (crt 0.893 ms, total boot 48.263 ms) �� ��E/TC:?? 00 get_rpc_alloc_res:645 RPC allocation failed. Non-secure world result: ret=0xffff0000 ret_origin=0 E/LD: init_elf:486 sys_open_ta_bin(bc50d971-d4c9-42c4-82cb-343fb7f37896) E/TC:?? 00 ldelf_init_with_ldelf:131 ldelf failed with res: 0xffff000c �� Jetson System firmware version 36.2.0-gcid-34956989 date 2023-11-30T18:35:35+00: 00 ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ** WARNING: Test Key is used. ** L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services... ��debugfs initialized ��I/TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled ��[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.15.131-rt-tegra (roberthilton@rdevlnx) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2022.08) 11.3.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT_RT Sat Feb 10 14:31:30 EST 2024 () [ 0.000000] Machine model: NVIDIA Jetson Orin NX Engineering Reference Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x46da6f318 SMBIOS=0xffff0000 SMBIOS 3.0=0x46d490000 MEMATTR=0x4677ab018 ESRT=0x467533818 RNG=0x45b220018 MEMRESERVE=0x45bcf2c18 [ 0.000000] random: crng init done [ 0.000000] secureboot: Secure boot disabled [ 0.000000] esrt: Reserving ESRT space from 0x0000000467533818 to 0x0000000467533850. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000044b000000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x0000000477ffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x4703017c0-0x470303fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000477ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bdffffff] [ 0.000000] node 0: [mem 0x00000000c2000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000045e482fff] [ 0.000000] node 0: [mem 0x000000045e483000-0x000000045e64bfff] [ 0.000000] node 0: [mem 0x000000045e64c000-0x000000046bb2ffff] [ 0.000000] node 0: [mem 0x000000046bb30000-0x000000046da6ffff] [ 0.000000] node 0: [mem 0x000000046da70000-0x0000000471dfffff] [ 0.000000] node 0: [mem 0x0000000471e00000-0x0000000471ffffff] [ 0.000000] node 0: [mem 0x0000000472000000-0x000000047259ffff] [ 0.000000] node 0: [mem 0x0000000476000000-0x0000000477ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000477ffffff] [ 0.000000] On node 0, zone DMA: 16384 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 14944 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 28 pages/cpu s77744 r8192 d28752 u114688 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Address authentication (architected algorithm) [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Hardware dirty bit management [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4065184 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=PARTUUID=9b6ef9f6-3fba-4f41-9690-f31afef96122 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 nospectre_bhb video=efifb:off console=tty0 bl_prof_dataptr=2031616@0x471E10000 bl_prof_ro_ptr=65536@0x471E00000 [ 0.000000] Unknown kernel command line parameters "mminit_loglevel=4 fbcon=map:0 bl_prof_dataptr=2031616@0x471E10000 bl_prof_ro_ptr=65536@0x471E00000", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfe0000-0x00000000fffe0000] (64MB) [ 0.000000] Memory: 15752892K/16520832K available (18496K kernel code, 4034K rwdata, 9768K rodata, 7488K init, 549K bss, 505796K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000000] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000327] Console: colour dummy device 80x25 [ 0.000333] printk: console [tty0] enabled [ 0.000375] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000379] pid_max: default: 32768 minimum: 301 [ 0.000410] LSM: Security Framework initializing [ 0.000426] Yama: becoming mindful. [ 0.000439] SELinux: Initializing. [ 0.000521] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000557] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.001437] rcu: Hierarchical SRCU implementation. [ 0.003463] Tegra Revision: A01 SKU: 211 CPU Process: 0 SoC Process: 0 [ 0.003700] Remapping and enabling EFI services. [ 0.004499] smp: Bringing up secondary CPUs ... [ 0.004905] Detected PIPT I-cache on CPU1 [ 0.004932] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.004953] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.005336] Detected PIPT I-cache on CPU2 [ 0.005348] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.005360] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.005718] Detected PIPT I-cache on CPU3 [ 0.005727] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.005738] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.008065] Detected PIPT I-cache on CPU4 [ 0.008088] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.008108] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.008520] Detected PIPT I-cache on CPU5 [ 0.008530] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.008541] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.008912] Detected PIPT I-cache on CPU6 [ 0.008922] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.008932] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.009307] Detected PIPT I-cache on CPU7 [ 0.009317] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.009328] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.009376] smp: Brought up 1 node, 8 CPUs [ 0.009379] SMP: Total of 8 processors activated. [ 0.009381] CPU features: detected: 32-bit EL0 Support [ 0.009382] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.009384] CPU features: detected: Common not Private translations [ 0.009384] CPU features: detected: CRC32 instructions [ 0.009385] CPU features: detected: Data cache clean to Point of Persistence [ 0.009386] CPU features: detected: Generic authentication (architected algorithm) [ 0.009387] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.009388] CPU features: detected: LSE atomic instructions [ 0.009389] CPU features: detected: Privileged Access Never [ 0.009389] CPU features: detected: RAS Extension Support [ 0.009390] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.022511] spectre-bhb mitigation disabled by command line option [ 0.034389] CPU: All CPU(s) started at EL2 [ 0.036049] devtmpfs: initialized [ 0.051814] KASLR enabled [ 0.051926] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.051938] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.054034] pinctrl core: initialized pinctrl subsystem [ 0.054648] SMBIOS 3.6.0 present. [ 0.054657] DMI: Unknown NVIDIA Jetson Orin NX Engineering Reference Developer Kit/NVIDIA Jetson Orin NX Engineering Reference Developer Kit, BI [ 0.054972] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.056408] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.056522] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.056623] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.056668] audit: initializing netlink subsys (disabled) [ 0.056763] audit: type=2000 audit(0.056:1): state=initialized audit_enabled=0 res=1 [ 0.057722] thermal_sys: Registered thermal governor 'step_wise' [ 0.057725] thermal_sys: Registered thermal governor 'user_space' [ 0.057726] thermal_sys: Registered thermal governor 'power_allocator' [ 0.059856] cpuidle: using governor menu [ 0.060061] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.060148] ASID allocator initialised with 32768 entries [ 0.061278] Serial: AMBA PL011 UART driver [ 0.069902] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 117, base_baud = 0) is a SBSA [ 0.080366] platform bpmp: Fixing up cyclic dependency with 2c60000.external-memory-controller [ 0.088907] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.088912] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.088914] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.088916] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.089506] cryptd: max_cpu_qlen set to 1000 [ 0.090843] ACPI: Interpreter disabled. [ 0.091848] VDD_1V8_AO: supplied by VDD_5V0_SYS [ 0.091967] VDD_3V3_AO: supplied by VDD_5V0_SYS [ 0.092221] VDD_AV10_HUB: supplied by VDD_5V0_SYS [ 0.092530] iommu: Default domain type: Translated [ 0.092533] iommu: DMA domain TLB invalidation policy: strict mode [ 0.092752] SCSI subsystem initialized [ 0.092874] vgaarb: loaded [ 0.092982] usbcore: registered new interface driver usbfs [ 0.092999] usbcore: registered new interface driver hub [ 0.093010] usbcore: registered new device driver usb [ 0.093356] pps_core: LinuxPPS API ver. 1 registered [ 0.093358] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.093365] PTP clock support registered [ 0.093420] EDAC MC: Ver: 3.0.0 [ 0.094115] Registered efivars operations [ 0.094591] FPGA manager framework [ 0.094638] Advanced Linux Sound Architecture Driver Initialized. [ 0.095181] clocksource: Switched to clocksource arch_sys_counter [ 0.118217] VFS: Disk quotas dquot_6.6.0 [ 0.118258] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.118397] pnp: PnP ACPI: disabled [ 0.121407] NET: Registered PF_INET protocol family [ 0.121903] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.124275] tcp_listen_portaddr_hash hash table entries: 8192 (order: 6, 393216 bytes, linear) [ 0.124494] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.124508] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.124667] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes, linear) [ 0.126064] TCP: Hash tables configured (established 131072 bind 65536) [ 0.126212] UDP hash table entries: 8192 (order: 7, 786432 bytes, linear) [ 0.126640] UDP-Lite hash table entries: 8192 (order: 7, 786432 bytes, linear) [ 0.127212] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.127562] RPC: Registered named UNIX socket transport module. [ 0.127565] RPC: Registered udp transport module. [ 0.127566] RPC: Registered tcp transport module. [ 0.127566] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.127575] PCI: CLS 0 bytes, default 64 [ 0.127722] Unpacking initramfs... [ 0.143285] hw perfevents: enabled with armv8_cortex_a78 PMU driver, 7 counters available [ 0.145491] Initialise system trusted keyrings [ 0.145601] workingset: timestamp_bits=42 max_order=22 bucket_order=0 [ 0.149045] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.149375] NFS: Registering the id_resolver key type [ 0.149389] Key type id_resolver registered [ 0.149390] Key type id_legacy registered [ 0.149429] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.149436] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.149451] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.149630] 9p: Installing v9fs 9p2000 file system support [ 0.161601] NET: Registered PF_ALG protocol family [ 0.161616] Key type asymmetric registered [ 0.161619] Asymmetric key parser 'x509' registered [ 0.161683] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.161688] io scheduler mq-deadline registered [ 0.161691] io scheduler kyber registered [ 0.171832] EINJ: ACPI disabled. [ 0.184789] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.186843] SuperH (H)SCI(F) driver initialized [ 0.187249] msm_serial: driver initialized [ 0.187912] printk: console [ttyTCU0] enabled [ 0.188948] arm-smmu 8000000.iommu: probing hardware configuration... [ 0.188954] arm-smmu 8000000.iommu: SMMUv2 with: [ 0.188961] arm-smmu 8000000.iommu: stage 1 translation [ 0.188963] arm-smmu 8000000.iommu: stage 2 translation [ 0.188964] arm-smmu 8000000.iommu: nested translation [ 0.188970] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 0.188976] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 0.188990] arm-smmu 8000000.iommu: Supported page sizes: 0x61311000 [ 0.188993] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.188994] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.190263] arm-smmu 10000000.iommu: probing hardware configuration... [ 0.190267] arm-smmu 10000000.iommu: SMMUv2 with: [ 0.190268] arm-smmu 10000000.iommu: stage 1 translation [ 0.190269] arm-smmu 10000000.iommu: stage 2 translation [ 0.190270] arm-smmu 10000000.iommu: nested translation [ 0.190274] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 0.190276] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 0.190283] arm-smmu 10000000.iommu: Supported page sizes: 0x61311000 [ 0.190284] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.190285] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.190782] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.190785] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.190787] arm-smmu 12000000.iommu: stage 1 translation [ 0.190787] arm-smmu 12000000.iommu: stage 2 translation [ 0.190788] arm-smmu 12000000.iommu: nested translation [ 0.190791] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 0.190793] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 0.190798] arm-smmu 12000000.iommu: Supported page sizes: 0x61311000 [ 0.190799] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 0.190801] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 0.204588] loop: module loaded [ 0.205818] megasas: 07.717.02.00-rc1 [ 0.210747] tun: Universal TUN/TAP device driver, 1.6 [ 0.211372] thunder_xcv, ver 1.0 [ 0.211408] thunder_bgx, ver 1.0 [ 0.211431] nicpf, ver 1.0 [ 0.212397] hclge is initializing [ 0.212437] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.212442] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.212492] e1000: Intel(R) PRO/1000 Network Driver [ 0.212498] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.212532] e1000e: Intel(R) PRO/1000 Network Driver [ 0.212538] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.212573] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.212579] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.212597] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.212605] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.212832] sky2: driver version 1.30 [ 0.213576] VFIO - User Level meta-driver version: 0.3 [ 0.215283] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.215292] ehci-pci: EHCI PCI platform driver [ 0.215324] ehci-platform: EHCI generic platform driver [ 0.215406] ehci-orion: EHCI orion driver [ 0.215495] ehci-exynos: EHCI Exynos driver [ 0.215557] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.215586] ohci-pci: OHCI PCI platform driver [ 0.215616] ohci-platform: OHCI generic platform driver [ 0.215694] ohci-exynos: OHCI Exynos driver [ 0.216152] usbcore: registered new interface driver usb-storage [ 0.218176] i2c_dev: i2c /dev entries driver [ 0.219560] pps pps0: new PPS source ktimer [ 0.219575] pps pps0: ktimer PPS source registered [ 0.219587] pps_ldisc: PPS line discipline registered [ 0.221865] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 0.224112] sdhci: Secure Digital Host Controller Interface driver [ 0.224118] sdhci: Copyright(c) Pierre Ossman [ 0.224640] Synopsys Designware Multimedia Card Interface Driver [ 0.225334] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.227445] SMCCC: SOC_ID: ID = jep106:036b:0234 Revision = 0x00000401 [ 0.227961] tegra-bpmp bpmp: Adding to iommu group 0 [ 0.229695] tegra-bpmp bpmp: firmware: e350806227175366b0bd-ac83764aab0 [ 0.312872] Freeing initrd memory: 10976K [ 3.393935] clocksource: tsc: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 3.393953] clocksource: osc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 49772407460 ns [ 3.393956] clocksource: usec: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 3.394362] usbcore: registered new interface driver usbhid [ 3.394366] usbhid: USB HID core driver [ 3.398199] optee: probing for conduit method. [ 3.398248] optee: revision 3.22 (1b7f2993) [ 3.457662] optee: dynamic shared memory is enabled [ 3.457933] optee: initialized driver [ 3.460293] usbcore: registered new interface driver snd-usb-audio [ 3.461969] NET: Registered PF_PACKET protocol family [ 3.462253] 9pnet: Installing 9P2000 support [ 3.462389] Key type dns_resolver registered [ 3.463589] printk: console [tty0]: printing thread started [ 3.464093] printk: console [ttyTCU0]: printing thread started [ 3.464190] Loading compiled-in X.509 certificates [ 3.479838] Loaded X.509 cert 'Build time autogenerated kernel key: 29a2ebdf3f8c89ea67fded1c7d46fc7512311f4b' [ 3.556062] simple-framebuffer chosen:framebuffer: framebuffer at 0x47de00000, 0x1680000 bytes [ 3.556081] simple-framebuffer chosen:framebuffer: format=x8r8g8b8, mode=2560x1440x32, linelength=16384 [ 3.561230] simple-framebuffer chosen:framebuffer: fb0: simplefb registered! [ 3.562427] tegra-gpcdma 2600000.dma-controller: Adding to iommu group 1 [ 3.566167] tegra-gpcdma 2600000.dma-controller: GPC DMA driver register 31 channels [ 3.567435] serial-tegra 3100000.serial: RX in PIO mode [ 3.567439] serial-tegra 3100000.serial: TX in PIO mode [ 3.567514] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 112, base_baud = 0) is a TEGRA_UART [ 3.568546] serial-tegra 3140000.serial: RX in PIO mode [ 3.568551] serial-tegra 3140000.serial: TX in PIO mode [ 3.568583] 3140000.serial: ttyTHS2 at MMIO 0x3140000 (irq = 113, base_baud = 0) is a TEGRA_UART [ 3.572709] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.572720] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.573297] tegra-i2c 3160000.i2c: Adding to iommu group 1 [ 3.581744] tegra-i2c 3180000.i2c: Adding to iommu group 1 [ 3.590348] tegra-i2c 31b0000.i2c: Adding to iommu group 1 [ 3.598814] tegra-i2c c240000.i2c: Adding to iommu group 1 [ 3.606624] i2c 1-0025: Fixing up cyclic dependency with 3520000.padctl [ 3.607502] tegra-i2c c250000.i2c: Adding to iommu group 1 [ 3.637861] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1968000 KHz, changing to: 1984000 KHz [ 3.640623] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 1986000 KHz, changing to: 1984000 KHz [ 3.643259] tegra-xusb 3610000.usb: Adding to iommu group 2 [ 3.660641] tegra-xusb 3610000.usb: Firmware timestamp: 2023-02-10 03:48:10 UTC [ 3.660651] tegra-xusb 3610000.usb: xHCI Host Controller [ 3.660671] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 1 [ 3.661425] tegra-xusb 3610000.usb: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000010810 [ 3.661673] tegra-xusb 3610000.usb: irq 123, io mem 0x03610000 [ 3.661829] tegra-xusb 3610000.usb: xHCI Host Controller [ 3.661833] tegra-xusb 3610000.usb: new USB bus registered, assigned bus number 2 [ 3.661838] tegra-xusb 3610000.usb: Host supports USB 3.1 Enhanced SuperSpeed [ 3.662291] hub 1-0:1.0: USB hub found [ 3.662306] hub 1-0:1.0: 4 ports detected [ 3.662652] hub 2-0:1.0: USB hub found [ 3.662663] hub 2-0:1.0: 4 ports detected [ 3.664730] irq: IRQ221: trimming hierarchy from :bus@0:pmc@c360000 [ 3.664855] irq: IRQ222: trimming hierarchy from :bus@0:interrupt-controller@f400000-1 [ 3.664958] irq: IRQ223: trimming hierarchy from :bus@0:pmc@c360000 [ 3.665052] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 3.701690] ALSA device list: [ 3.701694] No soundcards found. [ 3.731855] Freeing unused kernel memory: 7488K [ 3.731978] Run /init as init process [ 3.747212] Checking overlayfs setting... [ 3.755254] Overlayfs is disabled... [ 3.761425] Root device found: PARTUUID=9b6ef9f6-3fba-4f41-9690-f31afef96122 [ 3.995195] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 4.150226] hub 1-2:1.0: USB hub found [ 4.150681] hub 1-2:1.0: 4 ports detected [ 4.275604] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using tegra-xusb [ 4.330650] hub 2-1:1.0: USB hub found [ 4.331553] hub 2-1:1.0: 4 ports detected [ 14.640194] ERROR: PARTUUID=9b6ef9f6-3fba-4f41-9690-f31afef96122 mount fail...