�� [0000.062] I> MB1 (version: 1.4.0.4-t234-54845784-e89ea9bc) [0000.067] I> t234-A01-0-Silicon (0x12347) Prod [0000.071] I> Boot-mode : Coldboot [0000.074] I> Entry timestamp: 0x00000000 [0000.078] I> last_boot_error: 0x444b10c3 [0000.082] I> BR-BCT: preprod_dev_sign: 0 [0000.086] I> rst_source: 0x17, rst_level: 0x1 [0000.090] I> Task: SE error check [0000.093] I> Task: Bootchain select WAR set [0000.097] I> Task: Enable SLCG [0000.100] I> Task: CRC check [0000.103] I> Task: Initialize MB2 params [0000.107] I> MB2-params @ 0x40060000 [0000.111] I> Task: Crypto init [0000.114] I> Task: Perform MB1 KAT tests [0000.117] I> Task: NVRNG health check [0000.121] I> NVRNG: Health check success [0000.125] I> Task: MSS Bandwidth limiter settings for iGPU clients [0000.131] I> Task: Enabling and initialization of Bandwidth limiter [0000.137] I> No request to configure MBWT settings for any PC! [0000.142] I> Task: Secure debug controls [0000.146] I> Task: strap war set [0000.149] I> Task: Initialize SOC Therm [0000.153] I> Task: Program NV master stream id [0000.157] I> Task: Verify boot mode [0000.163] I> Task: Alias fuses [0000.167] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.174] I> Task: Print SKU type [0000.177] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000038 [0000.182] I> FUSE_OPT_GPC_DISABLE = 0x00000002 [0000.186] I> FUSE_OPT_TPC_DISABLE = 0x000000f0 [0000.191] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.195] I> FUSE_OPT_PVA_DISABLE = 0x00000000 [0000.199] I> FUSE_OPT_NVENC_DISABLE = 0x00000000 [0000.204] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000 [0000.208] I> FUSE_OPT_FSI_DISABLE = 0x00000001 [0000.212] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.217] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.221] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.225] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.229] I> FUSE_SKU_INFO_0 = 0xd3 [0000.232] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.237] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.240] I> SKU: Prod [0000.242] I> Task: Boost clocks [0000.245] I> Initializing PLLC2 for AXI_CBB. [0000.249] I> AXI_CBB : src = 35, divisor = 0 [0000.254] I> Task: Voltage monitor [0000.257] I> VMON: Vmon re-calibration and fine tuning done [0000.262] I> Task: UPHY init [0000.267] I> HSIO UPHY init done [0000.270] W> Skipping GBE UPHY config [0000.274] I> Task: Boot device init [0000.277] I> Boot_device: QSPI_FLASH instance: 0 [0000.282] I> Qspi clock source : pllc_out0 [0000.286] I> QSPI Flash: Macronix 64MB [0000.289] I> QSPI-0l initialized successfully [0000.294] I> Task: TSC init [0000.297] I> Task: Load membct [0000.299] I> RAM_CODE 0x4000001 [0000.302] I> Loading MEMBCT [0000.305] I> Slot: 0 [0000.307] I> Binary[0] block-3840 (partition size: 0x40000) [0000.313] I> Binary name: MEM-BCT-0 [0000.316] I> Size of crypto header is 8192 [0000.320] I> Size of crypto header is 8192 [0000.324] I> strt_pg_num(3840) num_of_pgs(16) read_buf(0x40050000) [0000.330] I> BCH of MEM-BCT-0 read from storage [0000.334] I> BCH address is : 0x40050000 [0000.338] I> MEM-BCT-0 header integrity check is success [0000.343] I> Binary magic in BCH component 0 is MEM0 [0000.348] I> component binary type is 0 [0000.352] I> strt_pg_num(3856) num_of_pgs(115) read_buf(0x40040000) [0000.359] I> MEM-BCT-0 binary is read from storage [0000.364] I> MEM-BCT-0 binary integrity check is success [0000.369] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.375] I> RAM_CODE 0x4000001 [0000.381] I> RAM_CODE 0x4000001 [0000.385] I> Task: Load Page retirement list [0000.389] I> Task: SDRAM params override [0000.392] I> Task: Save mem-bct info [0000.396] I> Task: Carveout allocate [0000.399] I> RCM blob carveout will not be allocated [0000.404] I> Update CCPLEX IST carveout from MB1-BCT [0000.409] I> ECC region[0]: Start:0x0, End:0x0 [0000.413] I> ECC region[1]: Start:0x0, End:0x0 [0000.417] I> ECC region[2]: Start:0x0, End:0x0 [0000.422] I> ECC region[3]: Start:0x0, End:0x0 [0000.426] I> ECC region[4]: Start:0x0, End:0x0 [0000.430] I> Non-ECC region[0]: Start:0x80000000, End:0x480000000 [0000.436] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.441] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.445] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.450] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.461] I> allocated(CO:43) base:0x47c000000 size:0x4000000 align: 0x200000 [0000.468] I> allocated(CO:39) base:0x479e00000 size:0x2200000 align: 0x10000 [0000.475] I> allocated(CO:20) base:0x476000000 size:0x2000000 align: 0x2000000 [0000.482] I> allocated(CO:24) base:0x474000000 size:0x2000000 align: 0x2000000 [0000.489] I> allocated(CO:28) base:0x472000000 size:0x2000000 align: 0x2000000 [0000.496] I> allocated(CO:22) base:0x478000000 size:0x1000000 align: 0x1000000 [0000.503] I> allocated(CO:35) base:0x479000000 size:0xe00000 align: 0x10000 [0000.510] I> allocated(CO:02) base:0x471800000 size:0x800000 align: 0x800000 [0000.517] I> allocated(CO:03) base:0x471000000 size:0x800000 align: 0x800000 [0000.524] I> allocated(CO:06) base:0x470800000 size:0x800000 align: 0x800000 [0000.531] I> allocated(CO:56) base:0x470000000 size:0x800000 align: 0x200000 [0000.538] I> allocated(CO:07) base:0x46fc00000 size:0x400000 align: 0x400000 [0000.545] I> allocated(CO:33) base:0x46f800000 size:0x400000 align: 0x200000 [0000.552] I> allocated(CO:23) base:0x46f600000 size:0x200000 align: 0x200000 [0000.559] I> allocated(CO:01) base:0x46f500000 size:0x100000 align: 0x100000 [0000.566] I> allocated(CO:05) base:0x46f400000 size:0x100000 align: 0x100000 [0000.573] I> allocated(CO:08) base:0x46f300000 size:0x100000 align: 0x100000 [0000.580] I> allocated(CO:09) base:0x46f200000 size:0x100000 align: 0x100000 [0000.586] I> allocated(CO:15) base:0x46f100000 size:0x100000 align: 0x100000 [0000.593] I> allocated(CO:17) base:0x46f000000 size:0x100000 align: 0x100000 [0000.600] I> allocated(CO:27) base:0x46ef00000 size:0x100000 align: 0x100000 [0000.607] I> allocated(CO:42) base:0x46ee00000 size:0x100000 align: 0x100000 [0000.614] I> allocated(CO:54) base:0x46ed80000 size:0x80000 align: 0x80000 [0000.621] I> allocated(CO:34) base:0x46ed70000 size:0x10000 align: 0x10000 [0000.628] I> allocated(CO:72) base:0x46eb70000 size:0x200000 align: 0x10000 [0000.635] I> allocated(CO:47) base:0x46e600000 size:0x400000 align: 0x200000 [0000.642] I> allocated(CO:48) base:0x46eb50000 size:0x20000 align: 0x10000 [0000.648] I> allocated(CO:69) base:0x46eb30000 size:0x20000 align: 0x10000 [0000.655] I> allocated(CO:49) base:0x46eb20000 size:0x10000 align: 0x10000 [0000.662] I> allocated(CO:50) base:0x46eb10000 size:0x10000 align: 0x10000 [0000.669] I> NSDRAM base: 0x80000000, end: 0x46eb70000, size: 0x3eeb70000 [0000.675] I> Task: Thermal check [0000.678] I> Using min_chip_limit as min_tmon_limit [0000.683] I> Using max_chip_limit as max_tmon_limit [0000.688] I> BCT max_tmon_limit = 105 [0000.691] I> BCT min_tmon_limit = -28 [0000.695] I> BCT max_tmon_limit = 105 [0000.698] I> BCT min_tmon_limit = -28 [0000.702] I> SKU specific max_chip_limit = 105 [0000.706] I> SKU specific min_chip_limit = -28 [0000.710] I> BCT max_chip_limit = 105 [0000.714] I> BCT min_chip_limit = -28 [0000.717] I> enable_soctherm_polling = 0 [0000.721] I> max temp read = 44 [0000.724] I> min temp read = 43 [0000.727] I> Enabling thermtrip [0000.730] I> Task: Update FSI SCR with thermal fuse data [0000.735] I> Task: Enable WDT 5th expiry [0000.739] I> Task: I2C register [0000.742] I> Task: Set I2C bus freq [0000.745] I> Task: Reset FSI [0000.748] I> Task: Pinmux init [0000.751] I> skipped mmio_addr = 0x9240008 [0000.755] I> skipped mmio_addr = 0x9240000 [0000.759] I> skipped mmio_addr = 0x9240010 [0000.763] I> skipped mmio_addr = 0x9240018 [0000.767] I> skipped mmio_addr = 0x9240020 [0000.771] I> skipped mmio_addr = 0x9240030 [0000.775] I> skipped mmio_addr = 0x9240028 [0000.779] I> skipped mmio_addr = 0x9240038 [0000.783] I> skipped mmio_addr = 0x9240040 [0000.787] I> skipped mmio_addr = 0x9240048 [0000.791] I> skipped mmio_addr = 0x9241000 [0000.795] I> skipped mmio_addr = 0x9241008 [0000.798] I> skipped mmio_addr = 0x9241010 [0000.802] I> skipped mmio_addr = 0x9241018 [0000.806] I> skipped mmio_addr = 0x9241020 [0000.810] I> skipped mmio_addr = 0x9241028 [0000.814] I> skipped mmio_addr = 0x9241030 [0000.818] I> skipped mmio_addr = 0x9241038 [0000.822] I> skipped mmio_addr = 0x9241040 [0000.826] I> skipped mmio_addr = 0x9242000 [0000.830] I> skipped mmio_addr = 0x9242008 [0000.834] I> Task: Prod config init [0000.837] I> Task: Pad voltage init [0000.841] I> Task: Prod init [0000.843] I> Task: Program rst req config reg [0000.848] I> Task: Common rail init [0000.851] I> DONE: Thermal config [0000.855] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.863] I> DONE: SOC rail config [0000.867] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.873] I> DONE: MEMIO rail config [0000.877] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT. [0000.883] I> DONE: GPU rail info [0000.887] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT. [0000.893] I> DONE: CV rail info [0000.896] I> Task: Mem clock src [0000.899] I> Task: Misc. board config [0000.903] I> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.909] I> Task: SDRAM init [0000.911] I> MemoryType: 4 MemBctRevision: 1 [0000.918] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1 [0000.926] I> MSS CAR: Init PLLM [0000.929] I> MSS CAR: Init PLLHUB [0000.933] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.945] I> SDRAM initialized! [0000.948] I> SDRAM Size in Total 0x400000000 [0000.952] I> Task: Dram Ecc scrub [0000.955] I> Task: DRAM alias check [0000.965] I> Task: Program NSDRAM carveout [0000.969] I> NSDRAM carveout encryption is enabled [0000.973] I> Program NSDRAM carveout [0000.977] I> Task: Register checker [0000.980] I> Task: Enable clock-mon [0000.984] I> FMON: Fmon re-programming done [0000.988] I> Task: Mapper init [0000.991] I> Task: SC7 Context Init [0000.995] I> Task: CCPLEX IST init [0000.998] I> Task: CPU WP0 [0001.001] I> Loading MCE [0001.003] I> Slot: 0 [0001.005] I> Binary[8] block-22784 (partition size: 0x80000) [0001.011] I> Binary name: MCE [0001.013] I> Size of crypto header is 8192 [0001.017] I> Size of crypto header is 8192 [0001.021] I> strt_pg_num(22784) num_of_pgs(16) read_buf(0x4003e000) [0001.028] I> BCH of MCE read from storage [0001.031] I> BCH address is : 0x4003e000 [0001.035] I> MCE header integrity check is success [0001.040] I> Binary magic in BCH component 0 is MTSM [0001.045] I> component binary type is 8 [0001.048] I> Size of crypto header is 8192 [0001.052] I> strt_pg_num(22800) num_of_pgs(357) read_buf(0x40000000) [0001.061] I> MCE binary is read from storage [0001.065] I> MCE binary integrity check is success [0001.070] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0001.076] I> Size of crypto header is 8192 [0001.087] I> Size of crypto header is 8192 [0001.091] I> Sending WP0 mailbox command to PSC [0001.100] I> Task: XUSB Powergate [0001.103] I> Skipping powergate XUSB. [0001.107] I> Task: MB1 fixed firewalls [0001.113] W> Firewall readback mismatch [0001.118] I> Task: Load bpmp-fw [0001.121] I> Slot: 0 [0001.123] I> Binary[15] block-9984 (partition size: 0x180000) [0001.129] I> Binary name: BPMP_FW [0001.132] I> Size of crypto header is 8192 [0001.136] I> Size of crypto header is 8192 [0001.140] I> strt_pg_num(9984) num_of_pgs(16) read_buf(0x807fe000) [0001.146] I> BCH of BPMP_FW read from storage [0001.150] I> BCH address is : 0x807fe000 [0001.154] I> BPMP_FW header integrity check is success [0001.159] I> Binary magic in BCH component 0 is BPMF [0001.164] I> component binary type is 15 [0001.168] I> Size of crypto header is 8192 [0001.171] I> strt_pg_num(10000) num_of_pgs(1990) read_buf(0x80000000) [0001.189] I> BPMP_FW binary is read from storage [0001.195] I> BPMP_FW binary integrity check is success [0001.200] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xf8bc0) [0001.207] I> Slot: 0 [0001.209] I> Binary[16] block-13056 (partition size: 0x400000) [0001.215] I> Binary name: BPMP_FW_DTB [0001.218] I> Size of crypto header is 8192 [0001.222] I> Size of crypto header is 8192 [0001.226] I> strt_pg_num(13056) num_of_pgs(16) read_buf(0x807fc000) [0001.232] I> BCH of BPMP_FW_DTB read from storage [0001.237] I> BCH address is : 0x807fc000 [0001.241] I> BPMP_FW_DTB header integrity check is success [0001.246] I> Binary magic in BCH component 0 is BPMD [0001.251] I> component binary type is 16 [0001.254] I> Size of crypto header is 8192 [0001.258] I> strt_pg_num(13072) num_of_pgs(724) read_buf(0x807a17f0) [0001.269] I> BPMP_FW_DTB binary is read from storage [0001.274] I> BPMP_FW_DTB binary integrity check is success [0001.280] I> Binary BPMP_FW_DTB loaded successfully at 0x807a17f0 (0x5a680) [0001.286] I> Task: BPMP fw ast config [0001.290] I> Task: Load psc-fw [0001.293] I> Slot: 0 [0001.295] I> Binary[17] block-21248 (partition size: 0xc0000) [0001.300] I> Binary name: PSC_FW [0001.304] I> Size of crypto header is 8192 [0001.307] I> Size of crypto header is 8192 [0001.311] I> strt_pg_num(21248) num_of_pgs(16) read_buf(0x80ffe000) [0001.318] I> BCH of PSC_FW read from storage [0001.322] I> BCH address is : 0x80ffe000 [0001.326] I> PSC_FW header integrity check is success [0001.331] I> Binary magic in BCH component 0 is PFWP [0001.335] I> component binary type is 17 [0001.339] I> Size of crypto header is 8192 [0001.343] I> strt_pg_num(21264) num_of_pgs(717) read_buf(0x80fa4600) [0001.353] I> PSC_FW binary is read from storage [0001.358] I> PSC_FW binary integrity check is success [0001.363] I> Binary PSC_FW loaded successfully at 0x80fa4600 (0x59980) [0001.370] I> Task: Load nvdec-fw [0001.373] I> Slot: 0 [0001.375] I> Binary[7] block-6400 (partition size: 0x100000) [0001.380] I> Binary name: NVDEC [0001.383] I> Size of crypto header is 8192 [0001.387] I> Size of crypto header is 8192 [0001.391] I> strt_pg_num(6400) num_of_pgs(16) read_buf(0x800fe000) [0001.397] I> BCH of NVDEC read from storage [0001.401] I> BCH address is : 0x800fe000 [0001.405] I> NVDEC header integrity check is success [0001.410] I> Binary magic in BCH component 0 is NDEC [0001.415] I> component binary type is 7 [0001.418] I> Size of crypto header is 8192 [0001.422] I> strt_pg_num(6416) num_of_pgs(560) read_buf(0x80000000) [0001.432] I> NVDEC binary is read from storage [0001.437] I> NVDEC binary integrity check is success [0001.441] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0001.448] I> Size of crypto header is 8192 [0001.459] I> Task: Load tsec-fw [0001.462] I> TSEC-FW load support not enabled [0001.466] I> Task: GPIO interrupt map [0001.470] I> Task: SC7 context save [0001.473] I> Slot: 0 [0001.475] I> Binary[27] block-0 (partition size: 0x100000) [0001.481] I> Binary name: BR_BCT [0001.484] I> Size of crypto header is 8192 [0001.488] I> Size of crypto header is 8192 [0001.491] I> Size of crypto header is 8192 [0001.495] I> strt_pg_num(0) num_of_pgs(16) read_buf(0xa0000000) [0001.501] I> BR_BCT binary is read from storage [0001.506] I> BR_BCT binary integrity check is success [0001.511] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.517] I> Slot: 0 [0001.519] I> Binary[13] block-23808 (partition size: 0x30000) [0001.525] I> Binary name: SC7-FW [0001.528] I> Size of crypto header is 8192 [0001.532] I> Size of crypto header is 8192 [0001.536] I> Size of crypto header is 8192 [0001.539] I> Size of crypto header is 8192 [0001.543] I> strt_pg_num(23808) num_of_pgs(16) read_buf(0xa0002000) [0001.550] I> BCH of SC7-FW read from storage [0001.554] I> BCH address is : 0xa0002000 [0001.558] I> SC7-FW header integrity check is success [0001.562] I> Binary magic in BCH component 0 is WB0B [0001.567] I> component binary type is 13 [0001.571] I> Size of crypto header is 8192 [0001.575] I> strt_pg_num(23824) num_of_pgs(349) read_buf(0xa0004000) [0001.583] I> SC7-FW binary is read from storage [0001.588] I> SC7-FW binary integrity check is success [0001.593] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x2ba00) [0001.599] I> Slot: 0 [0001.601] I> Binary[22] block-24192 (partition size: 0x30000) [0001.607] I> Binary name: PSC_RF [0001.610] I> Size of crypto header is 8192 [0001.614] I> Size of crypto header is 8192 [0001.618] I> Size of crypto header is 8192 [0001.622] I> Size of crypto header is 8192 [0001.626] I> strt_pg_num(24192) num_of_pgs(16) read_buf(0xa002fa00) [0001.632] I> BCH of PSC_RF read from storage [0001.636] I> BCH address is : 0xa002fa00 [0001.640] I> PSC_RF header integrity check is success [0001.645] I> Binary magic in BCH component 0 is PSCR [0001.650] I> component binary type is 22 [0001.653] I> Size of crypto header is 8192 [0001.657] I> strt_pg_num(24208) num_of_pgs(256) read_buf(0xa0031a00) [0001.665] I> PSC_RF binary is read from storage [0001.670] I> PSC_RF binary integrity check is success [0001.674] I> Binary PSC_RF loaded successfully at 0xa0031a00 (0x20000) [0001.684] I> Task: Save WP0 payload to SC7 ctx [0001.688] I> Task: Load MB2rf binary to SC7 ctx [0001.693] I> Slot: 0 [0001.695] I> Binary[14] block-24576 (partition size: 0x20000) [0001.700] I> Binary name: MB2_RF [0001.703] I> Size of crypto header is 8192 [0001.707] I> Size of crypto header is 8192 [0001.711] I> Size of crypto header is 8192 [0001.715] I> Size of crypto header is 8192 [0001.719] I> strt_pg_num(24576) num_of_pgs(16) read_buf(0xa00d6aa0) [0001.725] I> BCH of MB2_RF read from storage [0001.729] I> BCH address is : 0xa00d6aa0 [0001.733] I> MB2_RF header integrity check is success [0001.738] I> Binary magic in BCH component 0 is MB2R [0001.743] I> component binary type is 14 [0001.747] I> Size of crypto header is 8192 [0001.751] I> strt_pg_num(24592) num_of_pgs(223) read_buf(0xa00d8aa0) [0001.758] I> MB2_RF binary is read from storage [0001.763] I> MB2_RF binary integrity check is success [0001.768] I> Binary MB2_RF loaded successfully at 0xa00d8aa0 (0x1bcc0) [0001.774] I> Task: Save fuse alias data to SC7 ctx [0001.779] I> Task: Save PMIC data to SC7 ctx [0001.783] I> Task: Save Pinmux data to SC7 ctx [0001.787] I> Task: Save Pad Voltage data to SC7 ctx [0001.792] I> Task: Save controller prod data to SC7 ctx [0001.797] I> Task: Save prod cfg data to SC7 ctx [0001.801] I> Task: Save I2C bus freq data to SC7 ctx [0001.806] I> Task: Save SOCTherm data to SC7 ctx [0001.810] I> Task: Save FMON data to SC7 ctx [0001.815] I> Task: Save VMON data to SC7 ctx [0001.819] I> Task: Save TZDRAM data to SC7 ctx [0001.823] I> Task: Save GPIO int data to SC7 ctx [0001.827] I> Task: Save clock data to SC7 ctx [0001.832] I> Task: Save debug data to SC7 ctx [0001.836] I> Task: Save MBWT data to SC7 ctx [0001.844] I> SC7 context save done [0001.847] I> Task: Load MB2/Applet/FSKP [0001.851] I> Loading MB2 [0001.853] I> Slot: 0 [0001.855] I> Binary[6] block-8448 (partition size: 0x80000) [0001.861] I> Binary name: MB2 [0001.863] I> Size of crypto header is 8192 [0001.867] I> Size of crypto header is 8192 [0001.871] I> strt_pg_num(8448) num_of_pgs(16) read_buf(0x8007e000) [0001.877] I> BCH of MB2 read from storage [0001.881] I> BCH address is : 0x8007e000 [0001.885] I> MB2 header integrity check is success [0001.890] I> Binary magic in BCH component 0 is MB2B [0001.895] I> component binary type is 6 [0001.898] I> Size of crypto header is 8192 [0001.902] I> strt_pg_num(8464) num_of_pgs(839) read_buf(0x80000000) [0001.913] I> MB2 binary is read from storage [0001.918] I> MB2 binary integrity check is success [0001.923] I> Binary MB2 loaded successfully at 0x80000000 (0x68c10) [0001.929] I> Task: Map CCPLEX SHARED carveout [0001.933] I> Task: Prepare MB2 params [0001.937] I> Task: Dram ecc test [0001.940] I> Task: Misc NV security settings [0001.944] I> NVDEC sticky bits programming done [0001.949] I> Successfully powergated NVDEC [0001.952] I> Task: Disable/Reload WDT [0001.956] I> Task: Program misc carveouts [0001.960] I> Program IPC carveouts [0001.963] I> Task: Disable SCPM/POD reset [0001.967] I> SLCG Global override status := 0x0 [0001.972] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-7f6f63a6) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x001e74f8 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x470000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50002050) I> Task: Check MC errors (0x5000204c) I> Task: SMMU external bypass disable (0x500184fc) I> Task: Enable hot-plug capability (0x50028dec) I> Task: TZDRAM heap init (0x50019de0) I> Task: PSC mailbox init (0x50018548) I> Task: Crypto init (0x50006888) I> Task: Enable GP-SE clock (0x500021b4) I> Task: Measured Boot init (0x5001bd30) I> Task: fTPM silicon identity init (0x5001bedc) I> fTPM is not enabled. I> Task: OEM SC7 context save init (0x5001b27c) I> Task: I2C register (0x50002010) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001ff8) I> Task: Program CBB PCIE AMAP regions (0x5001b9dc) I> Task: Boot device init (0x50001f40) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001f20) I> Active chain: 0 I> Found 57 partitions in QSPI_FLASH (instance 0) I> Task: Load and authenticate registered FWs (0x5001ed44) I> Task: Load AUXP FWs (0x50028970) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Active chain: 0 I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Active chain: 0 I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x46f300000 I> Active chain: 0 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x46f000000 I> Successfully register RCE FW context save task with MB2 loader I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x476000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9461888 bytes I> dce: plain binary integrity check is success I> Active chain: 0 I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x476000000 I> Active chain: 0 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x46fc00000 I> Successfully register APE FW context save task with MB2 loader I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x46f400000 I> Successfully register XUSB FW context save task with MB2 loader I> Task: Check MC errors (0x5000204c) I> Task: Carveout setup (0x500214d0) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x500183cc) I> Task: Enable FSI VMON (0x50017ec8) I> Task: Validate FSI Therm readings (0x50017fac) I> Task: Restore XUSB sec (0x50001ef4) I> Task: Enable FSI SE clock (0x500189a4) I> Task: Initialize SBSA UART CAR (0x50002118) I> Task: Initialize CPUBL Params (0x50019990) I> CPUBL-params @ 0x472000000 I> Task: Ratchet update (0x50029e88) W> Skip ratchet update - OPTIN fuse not set I> Task: Prepare eeprom data (0x5001975c) I> Task: Revoke PKC fuse (0x50001d40) I> PKC revoke fuse burn not requested I> Task: FSI padctl context save (0x5001b558) W> Skipping FSI padctl config save: fsi not enabled I> Task: Unpowergate APE (0x5001910c) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: OEM firewalls (0x500259e4) I> OEM firewalls configured I> Task: Powergate APE (0x50019280) I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings (0x50025e38) I> Task: Unhalt AUXPs (0x50028bf4) I> Unhalting SPE.. I> Enabling combined UART ����spe: early_init ����vic initialized ����tsc initialized ����aon lic initialized ����spe: tag is 5243985d1b1eb3f06fac6d36bd7e74ac ����spe: SafeRTOS v8.4 ����spe: init ����scheduler initialized ����aon hsp initialized ����tag initialized ����tcu initialized ����bpmp ipc initialized ����spe: late init ����cpu_nic clock initialized ����apb clock initialized ����pm initialized ����bpmp hsp initialized ����top1 hsp initialized ����ccplex ipc initialized ����spe: start scheduler ���� I> Task: Trigger mailbox for PSC-BL1 exit (0x500185c8) I> Sending opcode 0x4d420802 to psc ��INFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x478002000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: 8a33b23-73b589c-8a15f76-rel-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 ��I> Received ACK from psc I> Tas��INFO: MONITOR: user task addr:0x478022000, blob offset:0x00020000 INFO: MONITOR: populated user images:13 INFO: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_init... INFO: enter idle task. �� hwwdt_init: WDT boot cfg 0x710010 sts 0x10 bpmp: socket 0 bpmp: base binary md5 is da583751bbfe2b7f6e204562d97ff39e bpmp: combined binary md5 is dc3fd3cac60f9b918e11d435834d12a3 bpmp: firmware tag is dc3fd3cac60f9b918e11-da583751bbf Control register check for CBB_CENTRAL_CBB_FIREWALL_MCB_BLF failed, expected value: 80030000 != actual value: 00000000 address: 13a159d0 Write control check for CBB_CENTRAL_CBB_FIREWALL_MCB_BLF failed, expected value: 0f18000b != actual value: 00000000 address: 13a159c8 Control register check for CBB_CENTRAL_CBB_FIREWALL_MCB_BLF failed, expected value: 80030000 != actual value: 00000000 address: 13a159d0 initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early initialized pm 465 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ��k: Start secure NOR provision ��initialized avfs_clk_platform initialized powergate ��(0x5001b7f4) I> ��initialized dvs initialized clk_mach_config suspend progress: 0x28115927 initialized suspend initialized strap initialized mce_dbell ��Task: Load FSI keyblob (0x500189ec) I> Task: Unhalt AUXPs (0x50028bfc) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x50019ab4) I> Task: Load TOS (0x5001a244) I> Task: Load and authenticate registered FWs (0x5001ed44) I> Active chain: 0 I> Partition name: A_cpu-bootloader I> ��[ 2.447972] Camera-FW on t234-rce-safe started TCU early console enabled. ��initialized emc initialized emc_mrq �� ��Size of partition:��initialized clk_cal initialized uphy_dt initialized uphy_mrq HSIO UPHY reset has been de-asserted 0x0 initialized uphy �� 3670016 I> Binary@ d��initialized pg_late initialized pg_mrq_init swdtimer_init: reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ��evice:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloader I> cpubl : oem ��initialized clk_cal_late initialized noc_late initialized cvc ��authentication of header done��initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/2 have not matching zones 0/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zones 0/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/0 have not matching zones 1/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zone list sizes 1/3 WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zones 1/2 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zones 2/0 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zone list sizes 3/1 WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zones 2/1 initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host��[ 2.632599] Camer�� enable pwm3 enable sdmmc4_axicif enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp initialized clk_mach_post ��a-FW on t234-rce-safe ready SHA1=07158d6a (crt 21.695 ms, total boot 207.380 m��initialized pg_post initialized regulator_post initia��s) ��lized profile initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete ��DCE: FW Boot Done �� I> cpubl : meta-blob integrity check is success. I> cpubl : will be decompressed at 0x46e600000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> cpubl : decompressed to 2535552 bytes I> cpubl: plain binary integrity check is success I> Active chain: 0 I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os I> MB2-params @ 0x40060000 I> cpubl_params: nsdram: carveout: 1, encryption: 1 I> NSDRAM carveout base: 0x80000000, size: 0x3eeb70000 I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0x46e600000 I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x47fdc3000 I> Relocating OP-TEE dtb from: 0x47fefec50 to 0x47c000860, size: 0x2886 I> [0] START: 0x80000000, SIZE: 0x3eeb70000 I> [1] START: 0x472000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Active chain: 0 I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x470000200 I> EKB detected (length: 0x410) @ VA:0x470000200 I> Task: Prepare TOS params (0x5001a1bc) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x47c000860 I> Task: OEM SC7 context save (0x5001b654) I> OEM sc7 context saved I> Task: Disable MSS perf stats (0x50028c88) I> Task: Program display sticky bits (0x50028c04) I> Task: Storage device deinit (0x500020bc) I> Task: SMMU init (0x500183f8) I> Task: Program GICv3 registers (0x50028d28) I> Task: Audit firewall settings (0x50025c38) I> Task: Bootchain failure check (0x500025dc) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished ��NOTICE: BL31: v2.6(release):da90aba-dirty NOTICE: BL31: Built : 19:15:35, Apr 28 2025 I/TC: Physical secure memory base 0x47c040000 size 0x3fc0000 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.22 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 21 11:24:05 UTC 2025 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Test OEM keys are being used. This is insecure for shipping products! I/TC: Primary CPU switching to normal world boot �� Jetson UEFI firmware (version 202210.5.1-Unknown built on 2025-07-10T01:56:28+00:00) ��I/TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled �� ��E/TC:?? 00 get_rpc_alloc_res:645 RPC allocation failed. Non-secure world result: ret=0xffff0000 ret_origin=0 Jetson UEFI firmware (version 202210.5.1-Unknown built on 2025-07-10T01:56:28+00 :00) ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. .. ��I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 8 initializing I/TC: Secondary CPU 8 switching to normal world boot I/TC: Secondary CPU 9 initializing I/TC: Secondary CPU 9 switching to normal world boot I/TC: Secondary CPU 10 initializing I/TC: Secondary CPU 10 switching to normal world boot I/TC: Secondary CPU 11 initializing I/TC: Secondary CPU 11 switching to normal world boot ��[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.216-tegra (zme@zme-System-Product-Name) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #104 SMP PREEMPT Wed Aug 20 16:52:01 CST 2025 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: NVIDIA Jetson Orin NX Engineering Reference Developer Kit Super [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x466f9da98 SMBIOS=0xffff0000 SMBIOS 3.0=0x46b5a0000 MEMATTR=0x466e69018 ESRT=0x466c86a98 RNG=0x459b60018 MEMRESERVE=0x45a4d4f18 [ 0.000000] random: crng init done [ 0.000000] esrt: Reserving ESRT space from 0x0000000466c86a98 to 0x0000000466c86ad0. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000449800000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000473ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000045c624fff] [ 0.000000] node 0: [mem 0x000000045c625000-0x000000045c70bfff] [ 0.000000] node 0: [mem 0x000000045c70c000-0x0000000469beffff] [ 0.000000] node 0: [mem 0x0000000469bf0000-0x000000046bb2ffff] [ 0.000000] node 0: [mem 0x000000046bb30000-0x000000046eb0ffff] [ 0.000000] node 0: [mem 0x000000046eb10000-0x000000046eb1ffff] [ 0.000000] node 0: [mem 0x0000000472000000-0x0000000473ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000473ffffff] [ 0.000000] On node 0, zone Normal: 224 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90392 r8192 d32488 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4066848 [ 0.000000] Kernel command line: root=/dev/nvme0n1p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 nospectre_bhb [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 15601324K/16526464K available (18240K kernel code, 3134K rwdata, 7124K rodata, 3968K init, 1399K bss, 662996K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000708] Console: colour dummy device 80x25 [ 0.000745] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000754] pid_max: default: 32768 minimum: 301 [ 0.000811] LSM: Security Framework initializing [ 0.000832] Yama: becoming mindful. [ 0.000849] SELinux: Initializing. [ 0.000915] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000940] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.001992] rcu: Hierarchical SRCU implementation. [ 0.002067] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.002641] DTS File Name: /mnt/ssd/work/nvidia_platform/jetpack515/orin_jetpack515/Linux_for_Tegra/sources/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/p3768/kernel-dts/tegra234-p3767-0000-super-p3768-0000-a0.dts [ 0.002645] DTB Build time: Aug 21 2025 16:58:48 [ 0.004010] Tegra Revision: A01 SKU: 0xd3 CPU Process: 0 SoC Process: 0 [ 0.004183] Remapping and enabling EFI services. [ 0.005027] smp: Bringing up secondary CPUs ... [ 0.033717] Detected PIPT I-cache on CPU1 [ 0.033753] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.033782] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.062416] Detected PIPT I-cache on CPU2 [ 0.062426] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.062440] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.091036] Detected PIPT I-cache on CPU3 [ 0.091046] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.091059] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.121715] Detected PIPT I-cache on CPU4 [ 0.121737] GICv3: CPU4: found redistributor 20000 region 0:0x000000000f540000 [ 0.121762] CPU4: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.150423] Detected PIPT I-cache on CPU5 [ 0.150433] GICv3: CPU5: found redistributor 20100 region 0:0x000000000f560000 [ 0.150448] CPU5: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.179675] Detected PIPT I-cache on CPU6 [ 0.179685] GICv3: CPU6: found redistributor 20200 region 0:0x000000000f580000 [ 0.179699] CPU6: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.208926] Detected PIPT I-cache on CPU7 [ 0.208936] GICv3: CPU7: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.208953] CPU7: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.209008] smp: Brought up 1 node, 8 CPUs [ 0.209021] SMP: Total of 8 processors activated. [ 0.209025] CPU features: detected: Privileged Access Never [ 0.209026] CPU features: detected: LSE atomic instructions [ 0.209028] CPU features: detected: User Access Override [ 0.209030] CPU features: detected: 32-bit EL0 Support [ 0.209032] CPU features: detected: Common not Private translations [ 0.209033] CPU features: detected: RAS Extension Support [ 0.209034] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.209036] CPU features: detected: CRC32 instructions [ 0.209038] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.226155] spectre-bhb mitigation disabled by command line option [ 0.242031] CPU: All CPU(s) started at EL2 [ 0.246774] devtmpfs: initialized [ 0.262195] KASLR enabled [ 0.262313] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.262324] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.263643] pinctrl core: initialized pinctrl subsystem [ 0.264105] SMBIOS 3.0.0 present. [ 0.264113] DMI: NVIDIA NVIDIA Jetson Orin NX Engineering Reference Developer Kit Super/Jetson, BIOS 202210.5.1-Unknown 04/22/2025 [ 0.264381] NET: Registered protocol family 16 [ 0.264981] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.265089] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.265189] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.265213] audit: initializing netlink subsys (disabled) [ 0.265293] audit: type=2000 audit(0.264:1): state=initialized audit_enabled=0 res=1 [ 0.265475] thermal_sys: Registered thermal governor 'step_wise' [ 0.265477] thermal_sys: Registered thermal governor 'power_allocator' [ 0.265479] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.266299] cpuidle: using governor menu [ 0.266386] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.266469] ASID allocator initialised with 32768 entries [ 0.266551] Serial: AMBA PL011 UART driver [ 0.268376] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.268399] Tegra reboot handler registered. [ 0.286947] mc: mapped MMIO address: 0xffff800010b10000 -> 0x2c10000 [ 0.286956] mc: mapped MMIO address: 0xffff800010b30000 -> 0x2c20000 [ 0.286962] mc: mapped MMIO address: 0xffff800010b50000 -> 0x2c30000 [ 0.286967] mc: mapped MMIO address: 0xffff800010b70000 -> 0x2c40000 [ 0.286972] mc: mapped MMIO address: 0xffff800010b90000 -> 0x2c50000 [ 0.286978] mc: mapped MMIO address: 0xffff800010bb0000 -> 0x2b80000 [ 0.286983] mc: mapped MMIO address: 0xffff800010bd0000 -> 0x2b90000 [ 0.286988] mc: mapped MMIO address: 0xffff800010bf0000 -> 0x2ba0000 [ 0.286996] mc: mapped MMIO address: 0xffff800010c10000 -> 0x2bb0000 [ 0.287001] mc: mapped MMIO address: 0xffff800010c30000 -> 0x1700000 [ 0.287006] mc: mapped MMIO address: 0xffff800010c50000 -> 0x1710000 [ 0.287011] mc: mapped MMIO address: 0xffff800010c70000 -> 0x1720000 [ 0.287017] mc: mapped MMIO address: 0xffff800010c90000 -> 0x1730000 [ 0.287025] mc: mapped MMIO address: 0xffff800010cb0000 -> 0x1740000 [ 0.287029] mc: mapped MMIO address: 0xffff800010cd0000 -> 0x1750000 [ 0.287034] mc: mapped MMIO address: 0xffff800010cf0000 -> 0x1760000 [ 0.287039] mc: mapped MMIO address: 0xffff800010d10000 -> 0x1770000 [ 0.287047] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.287079] mc-err: mcerr ops are set to t23x [ 0.287745] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 65, base_baud = 0) is a SBSA [ 1.298419] printk: console [ttyAMA0] enabled [ 1.306468] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.313180] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 1.319880] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.326579] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.335045] ACPI: Interpreter disabled. [ 1.339285] ddr-vddq: supplied by vdd-5v [ 1.343394] ddr-vdd2: supplied by vdd-5v [ 1.347424] vdd-AO-1v2: supplied by vdd-5v [ 1.351630] vdd-3v3: supplied by vdd-5v [ 1.355580] vdd-rtc: supplied by vdd-AO-1v2 [ 1.359866] vdd-0v95-uphy: supplied by vdd-AO-1v2 [ 1.364660] vdd-0v95-hdmi: supplied by vdd-AO-1v2 [ 1.369599] vdd-1v8: supplied by vdd-3v3-sys [ 1.373964] vdd-3v3-AO: supplied by vdd-5v-sys [ 1.378498] vdd-av10-hub: supplied by vdd-5v-sys [ 1.383216] vdd-vbus-a: supplied by vdd-5v-sys [ 1.387755] vdd-vbus-b: supplied by vdd-5v-sys [ 1.392292] vdd-3v3-dp: supplied by vdd-3v3-sys [ 1.397117] iommu: Default domain type: Translated [ 1.402030] eventlib_kernel: keventlib is initialized, test id: 0 [ 1.408306] SCSI subsystem initialized [ 1.412121] usbcore: registered new interface driver usbfs [ 1.417624] usbcore: registered new interface driver hub [ 1.422944] usbcore: registered new device driver usb [ 1.428182] mc: Linux media interface: v0.10 [ 1.432457] videodev: Linux video capture interface: v2.00 [ 1.438084] pps_core: LinuxPPS API ver. 1 registered [ 1.443047] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.452184] PTP clock support registered [ 1.456344] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 1.463499] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 1.471136] Registered efivars operations [ 1.475287] FPGA manager framework [ 1.478709] Advanced Linux Sound Architecture Driver Initialized. [ 1.485076] Bluetooth: Core ver 2.22 [ 1.488657] NET: Registered protocol family 31 [ 1.493098] Bluetooth: HCI device and connection manager initialized [ 1.499455] Bluetooth: HCI socket layer initialized [ 1.504332] Bluetooth: L2CAP socket layer initialized [ 1.509385] Bluetooth: SCO socket layer initialized [ 1.514739] camchar: rtcpu character device driver loaded [ 1.520343] clocksource: Switched to clocksource arch_sys_counter [ 1.679837] VFS: Disk quotas dquot_6.6.0 [ 1.683800] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.690999] pnp: PnP ACPI: disabled [ 1.696457] la/ptsa driver initialized. [ 1.700349] NET: Registered protocol family 2 [ 1.704908] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.714617] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.723259] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.731453] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.739358] TCP: Hash tables configured (established 131072 bind 65536) [ 1.746050] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 1.752866] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 1.760184] NET: Registered protocol family 1 [ 1.764846] RPC: Registered named UNIX socket transport module. [ 1.770772] RPC: Registered udp transport module. [ 1.775474] RPC: Registered tcp transport module. [ 1.780174] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.786624] PCI: CLS 0 bytes, default 64 [ 1.790680] Trying to unpack rootfs image as initramfs... [ 1.924666] Freeing initrd memory: 9560K [ 1.930710] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.938653] kvm [1]: IPA Size Limit: 48 bits [ 1.942942] kvm [1]: GICv3: no GICV resource entry [ 1.947732] kvm [1]: disabling GICv2 emulation [ 1.952188] kvm [1]: GIC system register CPU interface enabled [ 1.958092] kvm [1]: vgic interrupt IRQ9 [ 1.962128] kvm [1]: VHE mode initialized successfully [ 1.967917] Initialise system trusted keyrings [ 1.972486] workingset: timestamp_bits=46 max_order=22 bucket_order=0 [ 1.981062] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.987193] NFS: Registering the id_resolver key type [ 1.992267] Key type id_resolver registered [ 1.996448] Key type id_legacy registered [ 2.000485] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.007191] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.014597] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.030643] NET: Registered protocol family 38 [ 2.035089] Key type asymmetric registered [ 2.039184] Asymmetric key parser 'x509' registered [ 2.044080] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239) [ 2.051536] io scheduler mq-deadline registered [ 2.056068] io scheduler kyber registered [ 2.064390] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 2.069987] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 2.075571] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 2.081156] tegra-pwm 32e0000.pwm: PWM clk can sleep in ops [ 2.089300] tegra_dc_assign_hw_data: no matching compatible node [ 2.095309] tegradccommon module_init failed [ 2.099576] tegradc module_init failed [ 2.103583] EINJ: ACPI disabled. [ 2.108424] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 2.115302] tegra-pmc: ### PMC reset source: PSC [ 2.119917] tegra-pmc: ### PMC reset level: L1 [ 2.124356] tegra-pmc: ### PMC reset status reg: 0x5d [ 2.130636] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.578828] printk: console [ttyTCU0] enabled [ 3.583855] arm-smmu 12000000.iommu: probing hardware configuration... [ 3.590544] arm-smmu 12000000.iommu: SMMUv2 with: [ 3.595371] arm-smmu 12000000.iommu: stage 1 translation [ 3.600906] arm-smmu 12000000.iommu: stage 2 translation [ 3.606431] arm-smmu 12000000.iommu: nested translation [ 3.611879] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 3.619280] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 3.628135] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 3.634823] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 3.641515] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 3.648989] arm-smmu 10000000.iommu: probing hardware configuration... [ 3.655681] arm-smmu 10000000.iommu: SMMUv2 with: [ 3.660493] arm-smmu 10000000.iommu: stage 1 translation [ 3.666023] arm-smmu 10000000.iommu: stage 2 translation [ 3.671550] arm-smmu 10000000.iommu: nested translation [ 3.676999] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 3.684397] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 3.693263] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 3.699957] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 3.706641] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 3.713746] arm-smmu 8000000.iommu: probing hardware configuration... [ 3.720349] arm-smmu 8000000.iommu: SMMUv2 with: [ 3.725075] arm-smmu 8000000.iommu: stage 1 translation [ 3.730513] arm-smmu 8000000.iommu: stage 2 translation [ 3.735950] arm-smmu 8000000.iommu: nested translation [ 3.741306] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 3.748624] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 3.757382] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 3.763985] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 3.770590] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 3.777852] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 3.787541] tegra_profiler: version: 1.151, samples/io: 51/30 [ 3.793503] tegra_profiler: auth: init [ 3.797649] nvsciipc: loaded module [ 3.802812] tun: Universal TUN/TAP device driver, 1.6 [ 3.808441] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 3.815846] hns3: Copyright (c) 2017 Huawei Corporation. [ 3.821322] e1000e: Intel(R) PRO/1000 Network Driver [ 3.826403] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.832486] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.838024] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.843875] PPP generic driver version 2.4.2 [ 3.848307] PPP BSD Compression module registered [ 3.853134] PPP Deflate Compression module registered [ 3.858326] PPP MPPE Compression module registered [ 3.863264] usbcore: registered new interface driver r8152 [ 3.868899] usbcore: registered new interface driver asix [ 3.874447] usbcore: registered new interface driver ax88179_178a [ 3.880702] usbcore: registered new interface driver cdc_ether [ 3.886689] usbcore: registered new interface driver net1080 [ 3.892495] usbcore: registered new interface driver cdc_subset [ 3.898571] usbcore: registered new interface driver zaurus [ 3.904295] usbcore: registered new interface driver cdc_ncm [ 3.910102] usbcore: registered new interface driver aqc111 [ 3.915936] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.922280] ohci-pci: OHCI PCI platform driver [ 3.926844] ohci-platform: OHCI generic platform driver [ 3.932506] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.938845] usbcore: registered new interface driver uas [ 3.944312] usbcore: registered new interface driver usb-storage [ 3.950622] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.956699] mousedev: PS/2 mouse device common for all mice [ 3.962429] usbcore: registered new interface driver xpad [ 3.969848] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.975047] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.981431] i2c /dev entries driver [ 3.985119] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.990885] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.996558] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 4.002245] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 4.007923] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 4.013590] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 4.019259] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 4.024918] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 4.033258] pps pps0: new PPS source ktimer [ 4.037549] pps pps0: ktimer PPS source registered [ 4.042462] pps_ldisc: PPS line discipline registered [ 4.048480] device-mapper: uevent: version 1.0.3 [ 4.053301] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 4.062955] sdhci: Secure Digital Host Controller Interface driver [ 4.069298] sdhci: Copyright(c) Pierre Ossman [ 4.073762] Synopsys Designware Multimedia Card Interface Driver [ 4.079987] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.086522] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 4.093985] tegra-bpmp bpmp: firmware: dc3fd3cac60f9b918e11-da583751bbf [ 4.104029] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 4.109718] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x82 [ 4.120292] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 4.127672] nvvrs-pseq-rtc nvvrs-pseq-rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 4.136617] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful ��debugfs initialized ��[ 5.851130] hid: raw HID events driver (C) Jiri Kosina [ 5.856935] usbcore: registered new interface driver usbhid [ 5.862670] usbhid: USB HID core driver [ 5.867043] tegra-dce d800000.dce: Adding to iommu group 3 [ 5.874461] dce: dce_ipc_channel_init:319 Invalid Channel State [0x0] for ch_type [2] [ 5.883206] tegra234-aon c000000.aon: Adding to iommu group 4 [ 5.889819] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 5.898782] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [0]. Ignored... [ 5.898785] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 5.899654] c000000.aon:hsp: probed [ 5.907550] tegra234-aon c000000.aon: init done [ 5.907932] tegra23x-psc e860000.psc: Adding to iommu group 5 [ 5.916507] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 5.920497] tegra23x-psc e860000.psc: ext_cfg base:000000000eac31df [ 5.924952] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x1] [ 5.930723] tegra23x-psc e860000.psc: init done [ 5.937606] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [1] ... [ 5.937607] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored... [ 5.937617] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [1]. Ignored... [ 5.944215] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 6 [ 5.952977] dce: dce_admin_setup_clients_ipc:529 Get queue info failed for [2] [ 5.953102] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 5.958211] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 5.966040] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [3] ... [ 5.966041] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 5.966051] dce: dce_admin_ipc_handle_signal:90 Spurious signal on channel: [3]. Ignored... [ 5.978509] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 5.983801] dce: dce_start_boot_flow:173 DCE_BOOT_DONE [ 5.990232] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 6.066758] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 6.078466] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 6.090200] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 6.102755] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 6.115567] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 6.128184] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (112) [ 6.134988] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 6.147308] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=07158d6a2d3d02920f5ae2c585e6b8912c204c81 [ 6.160816] t19x_cache tegra-cache: probed [ 6.165235] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 6.17����9729] optee: probi��I��ng for conduit met��/��hod. ��TC: Reserved shared memory is disabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled ��[ 6.184334] optee: revision 3.22 (20181bba) [ 6.243371] optee: dynamic shared memory is enabled [ 6.252810] optee: initialized driver [ 6.271693] nvpmodel: initialized successfully [ 6.276441] tegra_hv: get_hvd: not initialized yet [ 6.281410] user_ivc_mempool: hypervisor not present [ 6.287724] usbcore: registered new interface driver snd-usb-audio [ 6.294896] [Awinic]aw882xx_i2c_init: aw882xx driver version v1.13.0 [ 6.301712] u32 classifier [ 6.304503] input device check on [ 6.308281] Actions configured [ 6.311949] Initializing XFRM netlink socket [ 6.316817] NET: Registered protocol family 10 [ 6.322633] Segment Routing with IPv6 [ 6.326459] NET: Registered protocol family 17 [ 6.331055] NET: Registered protocol family 15 [ 6.335725] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 6.349470] Bluetooth: RFCOMM socket layer initialized [ 6.354790] Bluetooth: RFCOMM ver 1.11 [ 6.358658] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 6.364752] Bluetooth: HIDP socket layer initialized [ 6.370484] 9pnet: Installing 9P2000 support [ 6.374938] Key type dns_resolver registered [ 6.380367] registered taskstats version 1 [ 6.384608] Loading compiled-in X.509 certificates [ 6.399253] Loaded X.509 cert 'Future robot Co. Ltd.: User-defined signature kernel key: f3c32918b1a3861c87dd35579b488bd15c93c6eb' [ 6.411735] tegra194-pcie 14100000.pcie: Adding to iommu group 7 [ 6.424493] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.431827] tegra194-pcie 14160000.pcie: Adding to iommu group 8 [ 6.444039] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 6.450813] tegra194-pcie 141e0000.pcie: Adding to iommu group 9 [ 6.462955] tegra194-pcie 141e0000.pcie: Using GICv2m MSI allocator [ 6.469855] tegra194-pcie 140a0000.pcie: Adding to iommu group 10 [ 6.482401] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 6.515513] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 11 [ 6.526162] host1x 13e40000.host1x: Adding to iommu group 12 [ 6.556396] host1x 13e40000.host1x: initialized [ 6.561476] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 13 [ 6.569556] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 6.580536] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 14 [ 6.588533] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 6.599442] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 15 [ 6.607414] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 6.618353] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 16 [ 6.626350] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.637275] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 17 [ 6.645289] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.656239] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 18 [ 6.664234] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.675195] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 19 [ 6.683182] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.694122] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 20 [ 6.702100] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.713058] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 21 [ 6.721063] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 6.732011] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 22 [ 6.740009] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 6.750965] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 23 [ 6.758987] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 6.769931] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 24 [ 6.777923] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 6.788885] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 25 [ 6.796847] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 6.807788] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 26 [ 6.815789] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 6.826748] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 27 [ 6.834741] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 6.845689] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 28 [ 6.853683] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 6.864659] falcon 15340000.vic: Adding to iommu group 29 [ 6.875238] falcon 15340000.vic: initialized [ 6.879987] falcon 15380000.nvjpg: Adding to iommu group 30 [ 6.888865] falcon 15380000.nvjpg: initialized [ 6.893567] falcon 15540000.nvjpg1: Adding to iommu group 31 [ 6.902319] falcon 15540000.nvjpg1: initialized [ 6.907121] falcon 154c0000.nvenc: Adding to iommu group 32 [ 6.917599] falcon 154c0000.nvenc: initialized [ 6.922322] falcon 15a50000.ofa: Adding to iommu group 33 [ 6.930883] falcon 15a50000.ofa: initialized [ 6.935429] nvdec 15480000.nvdec: Adding to iommu group 34 [ 6.947124] nvdec 15480000.nvdec: initialized [ 6.951761] tsec 15500000.tsec: Adding to iommu group 35 [ 6.962224] tsec 15500000.tsec: initialized [ 6.970273] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.987897] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 7.004023] gpio-397 (camera-control-output-low): hogged as output/low [ 7.010775] gpio-486 (camera-control-output-low): hogged as output/low [ 7.018663] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 7.025630] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 7.032632] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 7.039189] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 7.045666] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 7.051954] tegra-pwm 32e0000.pwm: PWM clk can sleep in ops [ 7.060662] tegra194-isp5 14800000.isp: Adding to iommu group 36 [ 7.069830] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 7.079092] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 7.085577] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 7.094803] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 7.104015] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 7.113239] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 7.122628] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 37 [ 7.130681] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 38 [ 7.138726] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: Adding to iommu group 37 [ 7.146888] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 7.153948] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: Adding to iommu group 38 [ 7.161946] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 7.169020] scare-pigeon 13e40000.host1x:isp-thi@14b00000: Adding to iommu group 36 [ 7.177221] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 7.184310] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 39 [ 7.192964] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000) [ 7.204359] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 40 [ 7.212950] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000) [ 7.224333] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 41 [ 7.232955] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000) [ 7.244340] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 42 [ 7.252955] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000) [ 7.264329] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 43 [ 7.272948] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000) [ 7.284318] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 44 [ 7.292956] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000) [ 7.304323] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 45 [ 7.312979] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000) [ 7.324363] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 46 [ 7.332967] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000) [ 7.344330] pva 16000000.pva0: Adding to iommu group 47 [ 7.354332] pva 16000000.pva0: initialized [ 7.366102] nvdla 15880000.nvdla0: Adding to iommu group 48 [ 7.376649] nvdla 15880000.nvdla0: initialized [ 7.381964] nvdla 158c0000.nvdla1: Adding to iommu group 49 [ 7.392076] nvdla 158c0000.nvdla1: initialized [ 7.397361] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 2 [ 7.404401] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 7.411975] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 7.418616] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 7.425380] serial-tegra 3100000.serial: Adding to iommu group 2 [ 7.432036] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 17, base_baud = 0) is a TEGRA_UART [ 7.441847] serial-tegra 3130000.serial: Adding to iommu group 2 [ 7.448374] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 63, base_baud = 0) is a TEGRA_UART [ 7.458065] serial-tegra 3140000.serial: Adding to iommu group 2 [ 7.464614] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 64, base_baud = 0) is a TEGRA_UART [ 7.492375] tegra-xusb 3610000.xhci: Firmware timestamp: 2023-02-10 03:48:10 UTC, Version: 80.05 release [ 7.502130] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.507713] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 7.516370] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 7.525969] tegra-xusb 3610000.xhci: irq 229, io mem 0x03610000 [ 7.532266] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.537817] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 7.545617] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 7.553251] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.561760] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.569204] usb usb1: Product: xHCI Host Controller [ 7.574228] usb usb1: Manufacturer: Linux 5.10.216-tegra xhci-hcd [ 7.580495] usb usb1: SerialNumber: 3610000.xhci [ 7.586021] hub 1-0:1.0: USB hub found [ 7.589906] hub 1-0:1.0: 4 ports detected [ 7.594380] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 7.602885] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.610318] usb usb2: Product: xHCI Host Controller [ 7.615331] usb usb2: Manufacturer: Linux 5.10.216-tegra xhci-hcd [ 7.621619] usb usb2: SerialNumber: 3610000.xhci [ 7.626939] hub 2-0:1.0: USB hub found [ 7.630808] hub 2-0:1.0: 4 ports detected [ 7.641577] [Awinic]aw882xx_i2c_probe: enter addr=0x34 [ 7.646886] [Awinic][0-0034]aw882xx_parse_gpio_dt: no reset gpio provided, will not HW reset device [ 7.656242] [Awinic][0-0034]aw882xx_parse_gpio_dt: irq gpio provided ok. [ 7.663144] [Awinic][0-0034]aw882xx_parse_dt: close dc protect! [ 7.669233] [Awinic][0-0034]aw882xx_parse_dt: read sync flag failed,default phase sync off [ 7.677731] [Awinic][0-0034]aw882xx_parse_rename_flag_dt: read rename flag failed, default rename off! [ 7.687390] [Awinic][0-0034]aw882xx_hw_reset: enter [ 7.692406] [Awinic][0-0034]aw882xx_hw_reset: has no reset gpio [ 7.698671] [Awinic][0-0034]aw882xx_read_chipid: aw882xx 2113 detected [ 7.710544] [Awinic][0-0034]aw_device_parse_sound_channel_dt: read sound-channel value is : 0 [ 7.719318] [Awinic][0-0034]aw882xx_device_parse_topo_id_dt: read aw-tx-topo-id failed,use default [ 7.728556] [Awinic][0-0034]aw882xx_device_parse_topo_id_dt: read aw-rx-topo-id failed,use default [ 7.737785] [Awinic][0-0034]aw882xx_device_parse_topo_id_dt: tx-topo-id: 0x1000ff00, rx-topo-id: 0x1000ff01 [ 7.747826] [Awinic][0-0034]aw882xx_device_parse_port_id_dt: read aw-tx-port-id failed,use default [ 7.757038] [Awinic][0-0034]aw882xx_device_parse_port_id_dt: read aw-rx-port-id failed,use default [ 7.766255] [Awinic][0-0034]aw882xx_device_parse_port_id_dt: tx-port-id: 0x1007, rx-port-id: 0x1006 [ 7.775569] [Awinic][0-0034]aw_cali_parse_dt: cali-check get failed ,default turn off [ 7.783622] [Awinic][0-0034]aw_cali_parse_dt: cali check :disable [ 7.789895] [Awinic][0-0034]aw_cali_parse_dt: cali mode is 0 [ 7.795707] [Awinic][0-0034]aw882xx_cali_init: cali mode is 0 [ 7.802082] [Awinic][0-0034]aw_cali_parse_re_dt: read aw-re-min failed, use default [ 7.809962] [Awinic][0-0034]aw_cali_parse_re_dt: read aw-re-max failed, use default [ 7.817874] [Awinic][0-0034]aw_cali_parse_re_dt: re min: 1000, re max: 50000 [ 7.825134] [Awinic][0-0034]aw882xx_monitor_init: enter [ 7.830516] [Awinic][0-0034]aw_parse_spin_dts: spin-mode get failed, spin switch off, spin_mode:0 [ 7.839636] [Awinic][0-0034]aw882xx_spin_init: aw_spin_kcontrol_st:0 [ 7.846265] irq: IRQ293: trimming hierarchy from :pmc@c360000 [ 7.854093] [Awinic][0-0034]aw882xx_append_i2c_suffix: change name is aw882xx-aif-0-34 [ 7.862310] [Awinic][0-0034]aw882xx_append_i2c_suffix: change name is Speaker_Playback_0_34 [ 7.870899] [Awinic][0-0034]aw882xx_append_i2c_suffix: change name is Speaker_Capture_0_34 [ 7.872635] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 7.879413] [Awinic][0-0034]aw882xx_dai_drv_append_suffix: dai name [aw882xx-aif-0-34] [ 7.894477] [Awinic][0-0034]aw882xx_dai_drv_append_suffix: pstream_name name [Speaker_Playback_0_34] [ 7.903943] [Awinic][0-0034]aw882xx_dai_drv_append_suffix: cstream_name name [Speaker_Capture_0_34] [ 7.913316] [Awinic][0-0034]aw882xx_i2c_probe: dev_cnt 1 [ 7.919453] [Awinic]aw882xx_i2c_probe: enter addr=0x35 [ 7.924753] [Awinic][0-0035]aw882xx_parse_gpio_dt: no reset gpio provided, will not HW reset device [ 7.934059] [Awinic][0-0035]aw882xx_parse_gpio_dt: irq gpio provided ok. [ 7.940952] [Awinic][0-0035]aw882xx_parse_dt: close dc protect! [ 7.947036] [Awinic][0-0035]aw882xx_parse_dt: read sync flag failed,default phase sync off [ 7.955557] [Awinic][0-0035]aw882xx_parse_rename_flag_dt: read rename flag failed, default rename off! [ 7.965166] [Awinic][0-0035]aw882xx_hw_reset: enter [ 7.970173] [Awinic][0-0035]aw882xx_hw_reset: has no reset gpio [ 7.976416] [Awinic][0-0035]aw882xx_read_chipid: aw882xx 2113 detected [ 7.988287] [Awinic][0-0035]aw_device_parse_sound_channel_dt: read sound-channel value is : 1 [ 7.997054] [Awinic][0-0035]aw882xx_device_parse_topo_id_dt: read aw-tx-topo-id failed,use default [ 8.006272] [Awinic][0-0035]aw882xx_device_parse_topo_id_dt: read aw-rx-topo-id failed,use default [ 8.015481] [Awinic][0-0035]aw882xx_device_parse_topo_id_dt: tx-topo-id: 0x1000ff00, rx-topo-id: 0x1000ff01 [ 8.025509] [Awinic][0-0035]aw882xx_device_parse_port_id_dt: read aw-tx-port-id failed,use default [ 8.034748] [Awinic][0-0035]aw882xx_device_parse_port_id_dt: read aw-rx-port-id failed,use default [ 8.043978] [Awinic][0-0035]aw882xx_device_parse_port_id_dt: tx-port-id: 0x1007, rx-port-id: 0x1006 [ 8.053283] [Awinic][0-0035]aw_cali_parse_dt: cali-check get failed ,default turn off [ 8.061337] [Awinic][0-0035]aw_cali_parse_dt: cali check :disable [ 8.067635] [Awinic][0-0035]aw_cali_parse_dt: cali mode is 0 [ 8.073478] [Awinic][0-0035]aw882xx_cali_init: cali mode is 0 [ 8.079379] [Awinic][0-0035]aw_cali_parse_re_dt: read aw-re-min failed, use default [ 8.087288] [Awinic][0-0035]aw_cali_parse_re_dt: read aw-re-max failed, use default [ 8.095206] [Awinic][0-0035]aw_cali_parse_re_dt: re min: 1000, re max: 50000 [ 8.102492] [Awinic][0-0035]aw882xx_monitor_init: enter [ 8.107897] [Awinic][0-0035]aw_parse_spin_dts: spin-mode get failed, spin switch off, spin_mode:0 [ 8.117047] [Awinic][0-0035]aw882xx_spin_init: aw_spin_kcontrol_st:0 [ 8.123674] irq: IRQ294: trimming hierarchy from :pmc@c360000 [ 8.123884] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 8.130864] [Awinic][0-0035]aw882xx_append_i2c_suffix: change name is aw882xx-aif-0-35 [ 8.138004] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.146150] [Awinic][0-0035]aw882xx_append_i2c_suffix: change name is Speaker_Playback_0_35 [ 8.153492] usb 1-2: Product: 4-Port USB 2.0 Hub [ 8.153494] usb 1-2: Manufacturer: Generic [ 8.171099] [Awinic][0-0035]aw882xx_append_i2c_suffix: change name is Speaker_Capture_0_35 [ 8.179616] [Awinic][0-0035]aw882xx_dai_drv_append_suffix: dai name [aw882xx-aif-0-35] [ 8.179731] hub 1-2:1.0: USB hub found [ 8.187761] [Awinic][0-0035]aw882xx_dai_drv_append_suffix: pstream_name name [Speaker_Playback_0_35] [ 8.187767] [Awinic][0-0035]aw882xx_dai_drv_append_suffix: cstream_name name [Speaker_Capture_0_35] [ 8.201299] hub 1-2:1.0: 4 ports detected [ 8.210358] [Awinic][0-0035]aw882xx_i2c_probe: dev_cnt 2 [ 8.221736] usb 2-1: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 8.226552] pca954x 2-0070: supply vcc not found, using dummy regulator [ 8.236473] pca954x 2-0070: supply vcc-pullup not found, using dummy regulator [ 8.243973] pca954x 2-0070: pca954x_probe: forcing device bus number, start 30. [ 8.251526] pca954x 2-0070: device detect skipped. [ 8.258048] i2c i2c-2: Added multiplexed i2c bus 30 [ 8.264155] i2c i2c-2: Added multiplexed i2c bus 31 [ 8.270241] i2c i2c-2: Added multiplexed i2c bus 32 [ 8.276475] i2c i2c-2: Added multiplexed i2c bus 33 [ 8.281533] pca954x 2-0070: registered 4 multiplexed busses for I2C switch pca9546 [ 8.294278] usb 2-1: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 8.298820] pca953x 7-0020: supply vcc not found, using dummy regulator [ 8.302703] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.309580] pca953x 7-0020: using no AI [ 8.316853] usb 2-1: Product: 4-Port USB 3.0 Hub [ 8.316854] usb 2-1: Manufacturer: Generic [ 8.330124] pca953x 7-0020: irq gpio provided ok. [ 8.335078] irq: IRQ295: trimming hierarchy from :pmc@c360000 [ 8.342512] gpio-313 (aud-pwr-high): hogged as output/high [ 8.348371] gpio-308 (camera-control-output-low-append): hogged as output/low [ 8.355934] gpio-309 (camera-control-output-low-append): hogged as output/low [ 8.363496] gpio-310 (camera-pca9546-rst-high): hogged as output/high [ 8.370173] hub 2-1:1.0: USB hub found [ 8.370486] gpio-306 (fdcan-stb-1-low): hogged as output/low [ 8.379880] hub 2-1:1.0: 4 ports detected [ 8.380077] gpio-307 (fdcan-stb-2-low): hogged as output/low [ 8.390058] gpio-301 (switch-pwr-1): hogged as output/high [ 8.395945] gpio-300 (switch-pwr-2): hogged as output/high [ 8.400616] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 8.402105] gpiochip2: registered GPIOs 300 to 315 on 7-0020 [ 8.414431] pca953x 7-0018: supply vcc not found, using dummy regulator [ 8.421353] pca953x 7-0018: using no AI [ 8.425441] pca953x 7-0018: no irq gpio provided. [ 8.430907] gpiochip3: registered GPIOs 292 to 299 on 7-0018 [ 8.439248] tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing [ 8.463032] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2002000 KHz, changing to: 1984000 KHz [ 8.475953] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2078000 KHz, changing to: 1984000 KHz [ 8.487779] tegra194-cpufreq e000000.ccplex: probed with ICC, cl:3 [ 8.494866] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 8.502356] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 8.509530] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 8.518215] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 8.526897] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 8.573138] usb 1-3: New USB device found, idVendor=0bda, idProduct=c822, bcdDevice= 0.00 [ 8.581555] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.588897] usb 1-3: Product: Bluetooth Radio [ 8.593458] usb 1-3: Manufacturer: Realtek [ 8.597743] usb 1-3: SerialNumber: 00e04c000001 [ 8.640500] tegra194-pcie 14100000.pcie: Link up [ 8.646349] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 8.653164] pci_bus 0001:00: root bus resource [bus 00-ff] [ 8.658799] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 8.668628] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 8.679461] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 8.687390] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 8.693719] pci 0001:00:00.0: PME# supported from D0 D3hot [ 8.699516] usb 2-2: new SuperSpeedPlus Gen 2 USB device number 3 using tegra-xusb [ 8.703926] pci 0001:01:00.0: [10ec:c822] type 00 class 0x028000 [ 8.713627] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 8.719558] pci 0001:01:00.0: reg 0x18: [mem 0x20a8000000-0x20a800ffff 64bit] [ 8.728046] pci 0001:01:00.0: supports D1 D2 [ 8.732466] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 8.743789] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff] [ 8.751255] pci 0001:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 8.757635] pci 0001:01:00.0: BAR 2: assigned [mem 0x20a8000000-0x20a800ffff 64bit] [ 8.765648] pci 0001:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 8.771964] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 8.777359] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff] [ 8.783663] pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 8.783667] usb 2-2: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 8.783670] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.791021] pci 0001:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 8.799427] usb 2-2: Product: 4-Port USB 3.0 Hub [ 8.806840] pci 0001:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 8.815442] usb 2-2: Manufacturer: Generic [ 8.833364] pcieport 0001:00:00.0: Adding to iommu group 7 [ 8.839261] pcieport 0001:00:00.0: PME: Signaling with IRQ 55 [ 8.845493] pcieport 0001:00:00.0: AER: enabled with IRQ 55 [ 8.852054] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 8.860074] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 8.867264] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 8.875974] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 8.875994] hub 2-2:1.0: USB hub found [ 8.884655] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 8.897218] hub 2-2:1.0: 4 ports detected [ 9.004499] tegra194-pcie 14160000.pcie: Link up [ 9.010411] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 9.017225] pci_bus 0004:00: root bus resource [bus 00-ff] [ 9.022862] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 9.032953] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 9.043776] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 9.051684] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 9.058000] pci 0004:00:00.0: PME# supported from D0 D3hot [ 9.067817] pci 0004:01:00.0: [1e4b:1202] type 00 class 0x010802 [ 9.074172] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 9.082418] pci 0004:01:00.0: PME# supported from D0 D3hot D3cold [ 9.092971] pci 0004:00:00.0: BAR 14: assigned [mem 0x2428000000-0x24280fffff] [ 9.100414] pci 0004:01:00.0: BAR 0: assigned [mem 0x2428000000-0x2428003fff 64bit] [ 9.108378] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 9.113750] pci 0004:00:00.0: bridge window [mem 0x2428000000-0x24280fffff] [ 9.121112] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 9.129854] pci 0004:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 9.138795] pcieport 0004:00:00.0: Adding to iommu group 8 [ 9.144648] pcieport 0004:00:00.0: PME: Signaling with IRQ 57 [ 9.151337] pcieport 0004:00:00.0: AER: enabled with IRQ 57 [ 9.157376] nvme 0004:01:00.0: Adding to iommu group 8 [ 9.163082] nvme nvme0: pci function 0004:01:00.0 [ 9.168154] nvme 0004:01:00.0: enabling device (0000 -> 0002) [ 9.168665] tegra194-pcie 141e0000.pcie: Using GICv2m MSI allocator [ 9.181986] tegra194-pcie 141e0000.pcie: host bridge /pcie@141e0000 ranges: [ 9.184322] nvme nvme0: allocated 16 MiB host memory buffer. [ 9.189166] tegra194-pcie 141e0000.pcie: IO 0x003e100000..0x003e1fffff -> 0x003e100000 [ 9.189172] tegra194-pcie 141e0000.pcie: MEM 0x3228000000..0x322fffffff -> 0x0040000000 [ 9.189174] tegra194-pcie 141e0000.pcie: MEM 0x2e40000000..0x3227ffffff -> 0x2e40000000 [ 9.228048] nvme nvme0: 8/0/0 default/read/poll queues [ 9.235170] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 [ 9.296349] tegra194-pcie 141e0000.pcie: Link up [ 9.303059] tegra194-pcie 141e0000.pcie: PCI host bridge to bus 0007:00 [ 9.309883] pci_bus 0007:00: root bus resource [bus 00-ff] [ 9.315520] pci_bus 0007:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3e100000-0x3e1fffff]) [ 9.325620] pci_bus 0007:00: root bus resource [mem 0x3228000000-0x322fffffff] (bus address [0x40000000-0x47ffffff]) [ 9.336450] pci_bus 0007:00: root bus resource [mem 0x2e40000000-0x3227ffffff pref] [ 9.344362] pci 0007:00:00.0: [10de:229a] type 01 class 0x060400 [ 9.350672] pci 0007:00:00.0: PME# supported from D0 D3hot [ 9.360627] pci 0007:01:00.0: [1912:0014] type 00 class 0x0c0330 [ 9.366981] pci 0007:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 9.374901] pci 0007:01:00.0: PME# supported from D0 D3hot D3cold [ 9.385339] pci 0007:00:00.0: BAR 14: assigned [mem 0x3228000000-0x32280fffff] [ 9.392775] pci 0007:01:00.0: BAR 0: assigned [mem 0x3228000000-0x3228001fff 64bit] [ 9.400737] pci 0007:00:00.0: PCI bridge to [bus 01-ff] [ 9.406109] pci 0007:00:00.0: bridge window [mem 0x3228000000-0x32280fffff] [ 9.413462] pci 0007:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 9.422209] pci 0007:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 9.431174] pcieport 0007:00:00.0: Adding to iommu group 9 [ 9.437068] pcieport 0007:00:00.0: PME: Signaling with IRQ 59 [ 9.443824] pcieport 0007:00:00.0: AER: enabled with IRQ 59 [ 9.449762] pci 0007:01:00.0: enabling device (0000 -> 0002) [ 9.455684] pci 0007:01:00.0: This is a D720201 device,do not handshake! [ 9.462627] pci 0007:01:00.0: quirk_usb_early_handoff+0x0/0x8e0 took 12617 usecs [ 9.471138] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 9.477820] vdd-3v3-sd: supplied by vdd-3v3 [ 9.483750] tegra194-isp5 14800000.isp: initialized [ 9.491004] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 9.497434] (NULL device *): fops function table already registered [ 9.504701] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 9.511722] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator [ 9.518476] irq: IRQ305: trimming hierarchy from :interrupt-controller@f400000-1 [ 9.633358] tegra194-pcie 140a0000.pcie: host bridge /pcie@140a0000 ranges: [ 9.640553] tegra194-pcie 140a0000.pcie: IO 0x002a100000..0x002a1fffff -> 0x002a100000 [ 9.649247] tegra194-pcie 140a0000.pcie: MEM 0x3528000000..0x352fffffff -> 0x0040000000 [ 9.657929] tegra194-pcie 140a0000.pcie: MEM 0x3240000000..0x3527ffffff -> 0x3240000000 [ 9.772505] tegra194-pcie 140a0000.pcie: Link up [ 9.779409] tegra194-pcie 140a0000.pcie: PCI host bridge to bus 0008:00 [ 9.786236] pci_bus 0008:00: root bus resource [bus 00-ff] [ 9.791875] pci_bus 0008:00: root bus resource [io 0x300000-0x3fffff] (bus address [0x2a100000-0x2a1fffff]) [ 9.801992] pci_bus 0008:00: root bus resource [mem 0x3528000000-0x352fffffff] (bus address [0x40000000-0x47ffffff]) [ 9.812818] pci_bus 0008:00: root bus resource [mem 0x3240000000-0x3527ffffff pref] [ 9.820738] pci 0008:00:00.0: [10de:229c] type 01 class 0x060400 [ 9.827056] pci 0008:00:00.0: PME# supported from D0 D3hot [ 9.837032] pci 0008:01:00.0: [10ec:8168] type 00 class 0x020000 [ 9.843351] pci 0008:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 9.849257] pci 0008:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 9.856345] pci 0008:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 9.864356] pci 0008:01:00.0: supports D1 D2 [ 9.868752] pci 0008:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 9.879916] pci 0008:00:00.0: BAR 14: assigned [mem 0x3528000000-0x35280fffff] [ 9.887352] pci 0008:00:00.0: BAR 13: assigned [io 0x300000-0x300fff] [ 9.894071] pci 0008:01:00.0: BAR 4: assigned [mem 0x3528000000-0x3528003fff 64bit] [ 9.902036] pci 0008:01:00.0: BAR 2: assigned [mem 0x3528004000-0x3528004fff 64bit] [ 9.909998] pci 0008:01:00.0: BAR 0: assigned [io 0x300000-0x3000ff] [ 9.916656] pci 0008:00:00.0: PCI bridge to [bus 01-ff] [ 9.922031] pci 0008:00:00.0: bridge window [io 0x300000-0x300fff] [ 9.928651] pci 0008:00:00.0: bridge window [mem 0x3528000000-0x35280fffff] [ 9.936011] pci 0008:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 9.944758] pci 0008:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 9.953707] pcieport 0008:00:00.0: Adding to iommu group 10 [ 9.959665] pcieport 0008:00:00.0: PME: Signaling with IRQ 61 [ 9.966101] pcieport 0008:00:00.0: AER: enabled with IRQ 61 [ 9.972977] [usbpower] pcie2usbProbe: pcie2usbProbe probe. [ 9.986167] [usbpower] of_gpio_dt: Initialized 12 GPIOs [ 9.995165] [usbpower] pcie2usbProbe: pcie2usb misc regist succeed [ 10.001952] irq: IRQ307: trimming hierarchy from :pmc@c360000 [ 10.007954] irq: IRQ308: trimming hierarchy from :interrupt-controller@f400000-1 [ 10.015629] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 10.023301] tegra-se-nvhost 15810000.se: Adding to iommu group 50 [ 10.030148] tegra-se-nvhost 15810000.se: initialized [ 10.046400] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 10.052796] tegra-se-nvhost 15820000.se: Adding to iommu group 51 [ 10.059485] tegra-se-nvhost 15820000.se: initialized [ 10.065446] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 10.071848] tegra-se-nvhost 15840000.se: Adding to iommu group 52 [ 10.078380] tegra-se-nvhost 15840000.se: initialized [ 10.087718] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 10.094636] tegra_actmon d230000.actmon: in actmon_register()... [ 10.100960] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 10.107174] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 10.115580] hvc_sysfs: hypervisor is not present [ 10.120328] [Awinic] aw87xxx_pa_init:driver version: v3.0.0 [ 10.126124] clk: Disabling unused clocks [ 10.164626] ALSA device list: [ 10.167694] No soundcards found. [ 10.171845] Freeing unused kernel memory: 3968K [ 10.176552] Run /init as init process [ 10.192866] Root device found: nvme0n1p1 [ 10.201528] Found dev node: /dev/nvme0n1p1 [ 10.252729] EXT4-fs (nvme0n1p1): 1 orphan inode deleted [ 10.258117] EXT4-fs (nvme0n1p1): recovery complete [ 10.265899] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 10.275840] Rootfs mounted over nvme0n1p1 [ 10.285691] Switching from initrd to actual rootfs [ 10.322081] systemd[1]: System time before build time, advancing clock. [ 10.380531] systemd[1]: systemd 245.4-4ubuntu3.24 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 10.404181] systemd[1]: Detected architecture arm64. [ 10.424492] systemd[1]: Set hostname to . [ 10.522339] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 10.535354] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 10.544938] systemd[1]: Created slice system-modprobe.slice. [ 10.568624] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 10.588598] systemd[1]: Created slice User and Session Slice. [ 10.608440] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 10.632414] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.656600] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.680389] systemd[1]: Reached target Local Encrypted Volumes. [ 10.700385] systemd[1]: Reached target Remote File Systems. [ 10.720363] systemd[1]: Reached target Slices. [ 10.736370] systemd[1]: Reached target Swap. [ 10.752506] systemd[1]: Listening on Syslog Socket. [ 10.772469] systemd[1]: Listening on fsck to fsckd communication Socket. [ 10.796422] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 10.820565] systemd[1]: Listening on Journal Audit Socket. [ 10.840455] systemd[1]: Listening on Journal Socket (/dev/log). [ 10.860481] systemd[1]: Listening on Journal Socket. [ 10.880478] systemd[1]: Listening on udev Control Socket. [ 10.904435] systemd[1]: Listening on udev Kernel Socket. [ 10.925410] systemd[1]: Mounting Huge Pages File System... [ 10.949382] systemd[1]: Mounting POSIX Message Queue File System... [ 10.969332] systemd[1]: Mounting Kernel Debug File System... [ 10.989370] systemd[1]: Mounting Kernel Trace File System... [ 11.009512] systemd[1]: Starting Journal Service... [ 11.029558] systemd[1]: Starting Set the console keyboard layout... [ 11.049737] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 11.077581] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 11.104399] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 11.113773] systemd[1]: Starting Load Kernel Module efi_pstore... [ 11.133254] systemd[1]: Starting Load Kernel Module pstore_blk... [ 11.153320] systemd[1]: Starting Load Kernel Module pstore_zone... [ 11.173275] systemd[1]: Starting Load Kernel Module ramoops... [ 11.197279] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 11.221242] systemd[1]: Started Nameserver information manager. [ 11.244512] systemd[1]: Reached target Network (Pre). [ 11.264775] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 11.274136] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 11.284690] systemd[1]: Starting Load Kernel Modules... [ 11.305313] systemd[1]: Starting Remount Root and Kernel File Systems... [ 11.312955] EXT4-fs (nvme0n1p1): re-mounted. Opts: (null) [ 11.333346] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 11.333410] systemd[1]: Starting udev Coldplug all Devices... [ 11.340660] nvmap_page_pool_init: Total RAM pages: 3969249 [ 11.351680] nvmap_page_pool_init: nvmap page pool size: 496156 pages (1938 MB) [ 11.351873] nvmap_background_zero_thread: PP zeroing thread starting. [ 11.381948] systemd[1]: Started Journal Service. [ 11.615875] systemd-journald[260]: Received client request to flush runtime journal. [ 12.011268] Loading of module with unavailable key is rejected [ 12.061763] spi-tegra114 3210000.spi: Adding to iommu group 2 [ 12.062049] imx219 30-0010: tegracam sensor driver:imx219_v2.0.6 [ 12.089189] xhci_hcd 0007:01:00.0: Adding to iommu group 9 [ 12.106771] spi-tegra114 3230000.spi: Adding to iommu group 2 [ 12.114984] imx219 30-0010: imx219_board_setup: error during i2c read probe (-121) [ 12.127725] cpu-throttle-alert cooling device registered. [ 12.136321] imx219 30-0010: board setup failed [ 12.137249] gpu-throttle-alert cooling device registered. [ 12.142905] imx219: probe of 30-0010 failed with error -121 [ 12.157120] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 16 channels [ 12.165959] imx219 31-0010: tegracam sensor driver:imx219_v2.0.6 [ 12.176367] tegra-hda 3510000.hda: Adding to iommu group 53 [ 12.186269] cv0-throttle-alert cooling device registered. [ 12.193043] r8168 0008:01:00.0: Adding to iommu group 10 [ 12.198847] r8168 Gigabit Ethernet driver 8.053.00-NAPI loaded [ 12.201440] cv1-throttle-alert cooling device registered. [ 12.206022] r8168 0008:01:00.0: enabling device (0000 -> 0003) [ 12.219599] imx219 31-0010: imx219_board_setup: error during i2c read probe (-121) [ 12.221924] cv2-throttle-alert cooling device registered. [ 12.233194] usbcore: registered new interface driver btusb [ 12.233303] tegra-asoc: sound: Adding to iommu group 54 [ 12.236053] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 12.238116] r8168 Copyright (C) 2024 Realtek NIC software team [ 12.238116] This program comes with ABSOLUTELY NO WARRANTY; for details, please see . [ 12.238116] This is free software, and you are welcome to redistribute it under certain conditions; see . [ 12.249553] imx219 31-0010: board setup failed [ 12.273035] soc0-throttle-alert cooling device registered. [ 12.293968] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [ 12.296460] imx219: probe of 31-0010 failed with error -121 [ 12.296656] imx219 32-0010: tegracam sensor driver:imx219_v2.0.6 [ 12.314000] soc1-throttle-alert cooling device registered. [ 12.320135] Bluetooth: hci0: RTL: rom_version status=0 version=3 [ 12.324865] imx219 32-0010: imx219_board_setup: error during i2c read probe (-121) [ 12.330019] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [ 12.330067] bluetooth hci0: Direct firmware load for rtl_bt/rtl8822cu_fw.bin failed with error -2 [ 12.335031] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 12.335035] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 12.336487] soc2-throttle-alert cooling device registered. [ 12.344175] bluetooth hci0: Falling back to sysfs fallback for: rtl_bt/rtl8822cu_fw.bin [ 12.344944] imx219 32-0010: board setup failed [ 12.345015] imx219: probe of 32-0010 failed with error -121 [ 12.345220] imx219 33-0010: tegracam sensor driver:imx219_v2.0.6 [ 12.352617] input: NVIDIA Jetson Orin NX HDA HDMI/DP,pcm=3 as /devices/platform/3510000.hda/sound/card0/input1 [ 12.352691] input: NVIDIA Jetson Orin NX HDA HDMI/DP,pcm=7 as /devices/platform/3510000.hda/sound/card0/input2 [ 12.352748] input: NVIDIA Jetson Orin NX HDA HDMI/DP,pcm=8 as /devices/platform/3510000.hda/sound/card0/input3 [ 12.352802] input: NVIDIA Jetson Orin NX HDA HDMI/DP,pcm=9 as /devices/platform/3510000.hda/sound/card0/input4 [ 12.363613] hot-surface-alert cooling device registered. [ 12.385560] usbcore: registered new interface driver rtk_btusb [ 12.417280] CAN device driver interface [ 12.418584] rtl88x2ce 0001:01:00.0: Adding to iommu group 7 [ 12.418958] rtl88x2ce 0001:01:00.0: enabling device (0000 -> 0003) [ 12.456376] tegra-i2c 3180000.i2c: I2C transfer timed out [ 12.481496] irq: IRQ312: trimming hierarchy from :pmc@c360000 [ 12.493046] imx219 33-0010: imx219_board_setup: error during i2c read probe (-110) [ 12.506431] cryptd: max_cpu_qlen set to 1000 [ 12.509039] spi_master spi0: will run message pump with realtime priority [ 12.511147] imx219 33-0010: board setup failed [ 12.511215] imx219: probe of 33-0010 failed with error -110 [ 12.538938] cfg80211: failed to load regulatory.db [ 12.547784] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8822cu_fw.bin not found [ 12.557781] mcp251xfd spi0.0 can0: MCP2518FD rev0.0 (-RX_INT -MAB_NO_WARN +CRC_REG +CRC_RX +CRC_TX +ECC -HD c:40.00MHz m:50.00MHz r:17.00MHz e:0.00MHz) successfully initialized. [ 12.617074] [Awinic][0-0034]aw882xx_codec_probe: enter [ 12.622627] [Awinic][0-0034]aw882xx_add_codec_controls: enter [ 12.628659] [Awinic][0-0034]aw882xx_append_i2c_suffix: change name is AIF_RX_0_34 [ 12.636371] [Awinic][0-0034]aw882xx_append_i2c_suffix: change name is Speaker_Playback_0_34 [ 12.644969] [Awinic][0-0034]aw882xx_append_i2c_suffix: change name is audio_out_0_34 [ 12.644971] [Awinic][0-0034]aw882xx_append_i2c_suffix: change name is AIF_TX_0_34 [ 12.644976] [Awinic][0-0034]aw882xx_append_i2c_suffix: change name is Speaker_Capture_0_34 [ 12.650943] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 12.650943] [ 12.689121] [Awinic][0-0034]aw882xx_append_i2c_suffix: change name is iv_in_0_34 [ 12.698745] [Awinic][0-0034]aw882xx_append_i2c_suffix: change name is audio_out_0_34 [ 12.706699] [Awinic][0-0034]aw882xx_append_i2c_suffix: change name is AIF_RX_0_34 [ 12.714376] [Awinic][0-0034]aw882xx_append_i2c_suffix: change name is AIF_TX_0_34 [ 12.722066] [Awinic][0-0034]aw882xx_append_i2c_suffix: change name is iv_in_0_34 [ 12.729772] [Awinic][0-0034]aw882xx_dev_init_cali_re: no cali, needn't init cali re [ 12.730014] [Awinic][0-0034]aw882xx_request_firmware: load [aw882xx_acf.bin] , file size: [2016] [ 12.746762] [Awinic]aw_dev_parse_check_acf_by_hdr: project name [A1901] [ 12.756564] [Awinic]aw_dev_parse_check_acf_by_hdr: custom name [Awinic] [ 12.766101] [Awinic]aw_dev_parse_check_acf_by_hdr: version name [0.0.0.0] [ 12.773291] [Awinic]aw_dev_parse_check_acf_by_hdr: author id 2427 [ 12.779581] [Awinic][0-0034]aw882xx_dev_parse_acf: enter [ 12.785048] [Awinic][0-0034]aw_dev_parse_dev_type: enter [ 12.790559] [Awinic][0-0034]aw_dev_parse_dev_type: get dev type num is 0, please use default [ 12.799247] [Awinic][0-0034]aw_dev_parse_acf_by_hdr: get dev type num is0, parse default dev type [ 12.808369] [Awinic][0-0034]aw_dev_parse_dev_default_type: enter [ 12.814544] [Awinic][0-0034]aw_dev_parse_reg_bin_with_hdr: data_size:292 enter [ 12.814551] AWINIC_BIN aw_parsing_bin_file,line= 443,aw_bin_parse code version:V0.0.7-V1.0.4 [ 12.814854] [Awinic][0-0035]aw882xx_codec_probe: enter [ 12.814925] [Awinic][0-0035]aw882xx_append_i2c_suffix: change name is AIF_RX_0_35 [ 12.814927] [Awinic][0-0035]aw882xx_append_i2c_suffix: change name is Speaker_Playback_0_35 [ 12.814929] [Awinic][0-0035]aw882xx_append_i2c_suffix: change name is audio_out_0_35 [ 12.814930] [Awinic][0-0035]aw882xx_append_i2c_suffix: change name is AIF_TX_0_35 [ 12.814932] [Awinic][0-0035]aw882xx_append_i2c_suffix: change name is Speaker_Capture_0_35 [ 12.814934] [Awinic][0-0035]aw882xx_append_i2c_suffix: change name is iv_in_0_35 [ 12.814939] [Awinic][0-0035]aw882xx_append_i2c_suffix: change name is audio_out_0_35 [ 12.814940] [Awinic][0-0035]aw882xx_append_i2c_suffix: change name is AIF_RX_0_35 [ 12.814941] [Awinic][0-0035]aw882xx_append_i2c_suffix: change name is AIF_TX_0_35 [ 12.814944] [Awinic][0-0035]aw882xx_append_i2c_suffix: change name is iv_in_0_35 [ 12.814983] [Awinic][0-0035]aw882xx_dev_init_cali_re: no cali, needn't init cali re [ 12.815040] [Awinic][0-0035]aw882xx_request_firmware: load [aw882xx_acf.bin] , file size: [2016] [ 12.815046] [Awinic][0-0035]aw882xx_request_firmware: [aw882xx_acf.bin] already loaded... [ 12.815047] [Awinic][0-0035]aw882xx_dev_parse_acf: enter [ 12.815048] [Awinic][0-0035]aw_dev_parse_dev_type: enter [ 12.815049] [Awinic][0-0035]aw_dev_parse_dev_type: get dev type num is 0, please use default [ 12.815050] [Awinic][0-0035]aw_dev_parse_acf_by_hdr: get dev type num is0, parse default dev type [ 12.815051] [Awinic][0-0035]aw_dev_parse_dev_default_type: enter [ 12.815052] [Awinic][0-0035]aw_dev_parse_reg_bin_with_hdr: data_size:292 enter [ 12.815054] AWINIC_BIN aw_parsing_bin_file,line= 443,aw_bin_parse code version:V0.0.7-V1.0.4 [ 12.815055] AWINIC_BIN aw_check_bin_header_version,line= 424,aw_bin_parse header_version 0x1000000 [ 12.815057] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 374,enter aw_parse_bin_header_1_0_0 [ 12.815058] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 378,aw_bin_parse bin_data_type 0x0 [ 12.815059] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 386,aw_bin_parse enter single bin branch [ 12.815060] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 388,aw_parse_bin_header_1_0_0 bin->single_bin_parse_num is 1 [ 12.815061] AWINIC_BIN aw_get_single_bin_header_1_0_0,line= 264,enter aw_get_single_bin_header_1_0_0 [ 12.815062] AWINIC_BIN aw_check_sum,line= 104,enter [ 12.815064] AWINIC_BIN aw_check_sum,line= 108,aw_bin_parse p_check_sum = 00000000170b92a2 [ 12.815067] AWINIC_BIN aw_check_sum,line= 117,aw_bin_parse bin_num=0, check_sum = 0x35f6, sum_data = 0x35f6 [ 12.815067] AWINIC_BIN aw_check_data_version,line= 133,enter [ 12.815068] AWINIC_BIN aw_check_register_num_v1,line= 150,enter [ 12.815069] AWINIC_BIN aw_check_register_num_v1,line= 153,aw_bin_parse p_check_sum = 0000000069621a67 [ 12.815071] AWINIC_BIN aw_check_register_num_v1,line= 160,aw_bin_parse bin_num=0, parse_register_num = 0x39, check_register_num = 0x39 [ 12.815072] AWINIC_BIN aw_parsing_bin_file,line= 508,aw_bin_parse parsing success [ 12.815074] [Awinic][0-0035]aw_dev_parse_reg_bin_with_hdr: data_size:292 enter [ 12.815074] AWINIC_BIN aw_parsing_bin_file,line= 443,aw_bin_parse code version:V0.0.7-V1.0.4 [ 12.815075] AWINIC_BIN aw_check_bin_header_version,line= 424,aw_bin_parse header_version 0x1000000 [ 12.815076] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 374,enter aw_parse_bin_header_1_0_0 [ 12.815077] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 378,aw_bin_parse bin_data_type 0x0 [ 12.815077] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 386,aw_bin_parse enter single bin branch [ 12.815079] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 388,aw_parse_bin_header_1_0_0 bin->single_bin_parse_num is 1 [ 12.815079] AWINIC_BIN aw_get_single_bin_header_1_0_0,line= 264,enter aw_get_single_bin_header_1_0_0 [ 12.815080] AWINIC_BIN aw_check_sum,line= 104,enter [ 12.815081] AWINIC_BIN aw_check_sum,line= 108,aw_bin_parse p_check_sum = 00000000170b92a2 [ 12.815083] AWINIC_BIN aw_check_sum,line= 117,aw_bin_parse bin_num=0, check_sum = 0x3524, sum_data = 0x3524 [ 12.815084] AWINIC_BIN aw_check_data_version,line= 133,enter [ 12.815084] AWINIC_BIN aw_check_register_num_v1,line= 150,enter [ 12.815085] AWINIC_BIN aw_check_register_num_v1,line= 153,aw_bin_parse p_check_sum = 0000000069621a67 [ 12.815087] AWINIC_BIN aw_check_register_num_v1,line= 160,aw_bin_parse bin_num=0, parse_register_num = 0x39, check_register_num = 0x39 [ 12.815087] AWINIC_BIN aw_parsing_bin_file,line= 508,aw_bin_parse parsing success [ 12.815089] [Awinic][0-0035]aw_monitor_parse_hdr_v_0_1_1: chip name:AW88261 [ 12.815090] [Awinic][0-0035]aw_monitor_parse_hdr_v_0_1_1: ui ver:0x70000 [ 12.815091] [Awinic][0-0035]aw_monitor_parse_hdr_v_0_1_1: monitor_switch:1, monitor_time:5000 (ms), monitor_count:1 [ 12.815092] [Awinic][0-0035]aw_monitor_parse_hdr_v_0_1_1: logic_switch:0, ipeak_switch:1, gain_switch:1, vmax_switch:1 [ 12.815094] [Awinic][0-0035]aw_monitor_parse_hdr_v_0_1_1: temp_switch:1, temp_aplha:1000, vol_switch:1, vol_aplha:1000 [ 12.815095] [Awinic][0-0035]aw_monitor_parse_temp_data_v_0_1_1: ===parse temp start === [ 12.815097] [Awinic][0-0035]aw_monitor_write_data_to_table: min_val:7, max_val:100, ipeak:0xa000, gain:0x0, vmax:0x0 [ 12.815098] [Awinic][0-0035]aw_monitor_write_data_to_table: min_val:2, max_val:5, ipeak:0x6000, gain:0x18, vmax:0xfff09558 [ 12.815099] [Awinic][0-0035]aw_monitor_write_data_to_table: min_val:-2, max_val:0, ipeak:0x5000, gain:0x24, vmax:0xffe81992 [ 12.815100] [Awinic][0-0035]aw_monitor_write_data_to_table: min_val:-50, max_val:-5, ipeak:0x4000, gain:0x40, vmax:0xffdf108d [ 12.815101] [Awinic][0-0035]aw_monitor_parse_temp_data_v_0_1_1: ===parse temp end === [ 12.815102] [Awinic][0-0035]aw_monitor_parse_vol_data_v_0_1_1: ===parse vol start === [ 12.815103] [Awinic][0-0035]aw_monitor_write_data_to_table: min_val:4100, max_val:5000, ipeak:0xa000, gain:0x0, vmax:0x0 [ 12.815104] [Awinic][0-0035]aw_monitor_write_data_to_table: min_val:3900, max_val:4000, ipeak:0xa000, gain:0x4, vmax:0xfff09558 [ 12.815105] [Awinic][0-0035]aw_monitor_write_data_to_table: min_val:3700, max_val:3800, ipeak:0x9000, gain:0x8, vmax:0xffe81992 [ 12.815106] [Awinic][0-0035]aw_monitor_write_data_to_table: min_val:3500, max_val:3600, ipeak:0x8000, gain:0xc, vmax:0xffdf108d [ 12.815107] [Awinic][0-0035]aw_monitor_write_data_to_table: min_val:0, max_val:3400, ipeak:0x7000, gain:0x10, vmax:0xffd596f0 [ 12.815108] [Awinic][0-0035]aw_monitor_parse_vol_data_v_0_1_1: ===parse vol end === [ 12.815108] [Awinic][0-0035]aw_dev_parse_skt_type: enter [ 12.815109] [Awinic][0-0035]aw_dev_parse_skt_type: get dsp data prof cnt is 0 [ 12.815110] [Awinic][0-0035]aw_dev_parse_get_vaild_prof: get vaild profile:2 [ 12.815113] [Awinic][0-0035]aw882xx_dev_parse_acf: parse cfg success [ 12.815985] [Awinic][0-0034]aw882xx_set_fmt: fmt=0x4001 [ 12.816249] [Awinic][0-0035]aw882xx_set_fmt: fmt=0x4001 [ 12.822017] [Awinic][0-0035]aw_dev_soft_reset: soft reset done [ 12.830687] AWINIC_BIN aw_check_bin_header_version,line= 424,aw_bin_parse header_version 0x1000000 [ 12.835317] tegra-asoc: sound: control 2:0:0:I2S2 codec frame mode:0 is already present [ 12.835322] tegra-asoc: sound: Failed to add control: I2S2 codec frame mode! [ 12.835336] tegra-asoc: sound: control 2:0:0:I2S2 codec master mode:0 is already present [ 12.835337] tegra-asoc: sound: Failed to add control: I2S2 codec master mode! [ 12.849137] [Awinic][0-0035]aw_dev_reg_fw_update: amppd_st=0x0000 [ 12.857702] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 374,enter aw_parse_bin_header_1_0_0 [ 12.897486] [Awinic][0-0035]aw_dev_reg_fw_update: mute_st=0x0000 [ 12.905223] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 378,aw_bin_parse bin_data_type 0x0 [ 12.956758] [Awinic][0-0035]aw_dev_reg_fw_update: reserve_val = 0x0040 [ 12.965450] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 386,aw_bin_parse enter single bin branch [ 13.075550] [Awinic][0-0035]aw_dev_reg_fw_update: efuse check: 0 [ 13.081373] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 388,aw_parse_bin_header_1_0_0 bin->single_bin_parse_num is 1 [ 13.456022] [Awinic][0-0035]aw882xx_spin_set_record_val: do nothing [ 13.462572] AWINIC_BIN aw_get_single_bin_header_1_0_0,line= 264,enter aw_get_single_bin_header_1_0_0 [ 13.467900] [Awinic][0-0035]aw882xx_spin_set_record_val: set record spin val done [ 13.525922] [Awinic][0-0035]aw_dev_set_vcalb: icalk=1011, vcalk=984, vcalb=8416, reg_val=0x20e0 [ 13.534427] AWINIC_BIN aw_check_sum,line= 104,enter [ 13.540930] [Awinic][0-0035]aw_dev_set_vcalb: done [ 13.549023] AWINIC_BIN aw_check_sum,line= 108,aw_bin_parse p_check_sum = 00000000d3de47fb [ 13.549027] AWINIC_BIN aw_check_sum,line= 117,aw_bin_parse bin_num=0, check_sum = 0x35f1, sum_data = 0x35f1 [ 13.556583] [Awinic][0-0035]aw_dev_reg_fw_update: load Music done [ 13.564681] AWINIC_BIN aw_check_data_version,line= 133,enter [ 13.571182] [Awinic][0-0035]aw_pid_2113_frcset_check: tem is 0x5800, frcset_en is 0 [ 13.581592] AWINIC_BIN aw_check_register_num_v1,line= 150,enter [ 13.581595] AWINIC_BIN aw_check_register_num_v1,line= 153,aw_bin_parse p_check_sum = 00000000963b9e3a [ 13.588027] [Awinic][0-0035]aw882xx_monitor_stop: enter [ 13.588359] [Awinic][0-0035]aw882xx_dev_clear_int_status: done [ 13.597417] AWINIC_BIN aw_check_register_num_v1,line= 160,aw_bin_parse bin_num=0, parse_register_num = 0x39, check_register_num = 0x39 [ 13.605231] [Awinic][0-0035]aw882xx_dev_set_intmask: done [ 13.614077] AWINIC_BIN aw_parsing_bin_file,line= 508,aw_bin_parse parsing success [ 13.614081] [Awinic][0-0034]aw_dev_parse_reg_bin_with_hdr: data_size:292 enter [ 13.619377] [Awinic][0-0035]aw_dev_uls_hmute: done [ 13.624015] AWINIC_BIN aw_parsing_bin_file,line= 443,aw_bin_parse code version:V0.0.7-V1.0.4 [ 13.624019] AWINIC_BIN aw_check_bin_header_version,line= 424,aw_bin_parse header_version 0x1000000 [ 13.651324] [Awinic][0-0035]aw882xx_dev_mute: done [ 13.654533] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 374,enter aw_parse_bin_header_1_0_0 [ 13.664082] [Awinic][0-0035]aw_dev_amppd: done [ 13.668498] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 378,aw_bin_parse bin_data_type 0x0 [ 13.668502] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 386,aw_bin_parse enter single bin branch [ 13.678283] [Awinic][0-0035]aw_dev_pwd: done [ 13.683356] AWINIC_BIN aw_parse_bin_header_1_0_0,line= 388,aw_parse_bin_header_1_0_0 bin->single_bin_parse_num is 1 [ 13.683359] AWINIC_BIN aw_get_single_bin_header_1_0_0,line= 264,enter aw_get_single_bin_header_1_0_0 [ 13.683362] AWINIC_BIN aw_check_sum,line= 104,enter [ 13.689351] [Awinic][0-0035]aw882xx_device_stop: done [ 13.689354] [Awinic][0-0035]aw882xx_device_init: init done [ 13.701803] AWINIC_BIN aw_check_sum,line= 108,aw_bin_parse p_check_sum = 00000000170b92a2 [ 13.701807] AWINIC_BIN aw_check_sum,line= 117,aw_bin_parse bin_num=0, check_sum = 0x3524, sum_data = 0x3524 [ 13.839330] AWINIC_BIN aw_check_data_version,line= 133,enter [ 13.839331] AWINIC_BIN aw_check_register_num_v1,line= 150,enter [ 13.839332] AWINIC_BIN aw_check_register_num_v1,line= 153,aw_bin_parse p_check_sum = 0000000069621a67 [ 13.839333] AWINIC_BIN aw_check_register_num_v1,line= 160,aw_bin_parse bin_num=0, parse_register_num = 0x39, check_register_num = 0x39 [ 13.839334] AWINIC_BIN aw_parsing_bin_file,line= 508,aw_bin_parse parsing success [ 13.839337] [Awinic][0-0034]aw_monitor_parse_hdr_v_0_1_1: chip name:AW88261 [ 13.839338] [Awinic][0-0034]aw_monitor_parse_hdr_v_0_1_1: ui ver:0x70000 [ 13.839339] [Awinic][0-0034]aw_monitor_parse_hdr_v_0_1_1: monitor_switch:1, monitor_time:5000 (ms), monitor_count:1 [ 13.839341] [Awinic][0-0034]aw_monitor_parse_hdr_v_0_1_1: logic_switch:0, ipeak_switch:1, gain_switch:1, vmax_switch:1 [ 13.839342] [Awinic][0-0034]aw_monitor_parse_hdr_v_0_1_1: temp_switch:1, temp_aplha:1000, vol_switch:1, vol_aplha:1000 [ 13.839343] [Awinic][0-0034]aw_monitor_parse_temp_data_v_0_1_1: ===parse temp start === [ 13.839347] [Awinic][0-0034]aw_monitor_write_data_to_table: min_val:7, max_val:100, ipeak:0xa000, gain:0x0, vmax:0x0 [ 13.839348] [Awinic][0-0034]aw_monitor_write_data_to_table: min_val:2, max_val:5, ipeak:0x6000, gain:0x18, vmax:0xfff09558 [ 13.839349] [Awinic][0-0034]aw_monitor_write_data_to_table: min_val:-2, max_val:0, ipeak:0x5000, gain:0x24, vmax:0xffe81992 [ 13.839350] [Awinic][0-0034]aw_monitor_write_data_to_table: min_val:-50, max_val:-5, ipeak:0x4000, gain:0x40, vmax:0xffdf108d [ 13.839352] [Awinic][0-0034]aw_monitor_parse_temp_data_v_0_1_1: ===parse temp end === [ 13.839353] [Awinic][0-0034]aw_monitor_parse_vol_data_v_0_1_1: ===parse vol start === [ 13.839354] [Awinic][0-0034]aw_monitor_write_data_to_table: min_val:4100, max_val:5000, ipeak:0xa000, gain:0x0, vmax:0x0 [ 13.839355] [Awinic][0-0034]aw_monitor_write_data_to_table: min_val:3900, max_val:4000, ipeak:0xa000, gain:0x4, vmax:0xfff09558 [ 13.839356] [Awinic][0-0034]aw_monitor_write_data_to_table: min_val:3700, max_val:3800, ipeak:0x9000, gain:0x8, vmax:0xffe81992 [ 13.839357] [Awinic][0-0034]aw_monitor_write_data_to_table: min_val:3500, max_val:3600, ipeak:0x8000, gain:0xc, vmax:0xffdf108d [ 13.839359] [Awinic][0-0034]aw_monitor_write_data_to_table: min_val:0, max_val:3400, ipeak:0x7000, gain:0x10, vmax:0xffd596f0 [ 13.839360] [Awinic][0-0034]aw_monitor_parse_vol_data_v_0_1_1: ===parse vol end === [ 13.839361] [Awinic][0-0034]aw_dev_parse_skt_type: enter [ 13.839363] [Awinic][0-0034]aw_dev_parse_skt_type: get dsp data prof cnt is 0 [ 13.839364] [Awinic][0-0034]aw_dev_parse_get_vaild_prof: get vaild profile:2 [ 13.839366] [Awinic][0-0034]aw882xx_dev_parse_acf: parse cfg success [ 13.839505] [Awinic][0-0034]aw_dev_soft_reset: soft reset done [ 14.101529] [Awinic][0-0034]aw_dev_reg_fw_update: amppd_st=0x0000 [ 14.110841] [Awinic][0-0034]aw_dev_reg_fw_update: mute_st=0x0000 [ 14.119927] [Awinic][0-0034]aw_dev_reg_fw_update: reserve_val = 0x0040 [ 14.128140] [Awinic][0-0034]aw_dev_reg_fw_update: efuse check: 0 [ 14.139292] [Awinic][0-0034]aw882xx_spin_set_record_val: do nothing [ 14.145751] [Awinic][0-0034]aw882xx_spin_set_record_val: set record spin val done [ 14.154295] [Awinic][0-0034]aw_dev_set_vcalb: icalk=996, vcalk=986, vcalb=8275, reg_val=0x2053 [ 14.165812] [Awinic][0-0034]aw_dev_set_vcalb: done [ 14.173083] [Awinic][0-0034]aw_dev_reg_fw_update: load Music done [ 14.179689] [Awinic][0-0034]aw_pid_2113_frcset_check: tem is 0x5800, frcset_en is 0 [ 14.187573] [Awinic][0-0034]aw882xx_monitor_stop: enter [ 14.193277] [Awinic][0-0034]aw882xx_dev_clear_int_status: done [ 14.199402] [Awinic][0-0034]aw882xx_dev_set_intmask: done [ 14.205245] [Awinic][0-0034]aw_dev_uls_hmute: done [ 14.229562] [Awinic][0-0034]aw882xx_dev_mute: done [ 14.236172] [Awinic][0-0034]aw_dev_amppd: done [ 14.241034] [Awinic][0-0034]aw_dev_pwd: done [ 14.245436] [Awinic][0-0034]aw882xx_device_stop: done [ 14.250630] [Awinic][0-0034]aw882xx_device_init: init done [ 15.098876] using random self ethernet address [ 15.103467] using random host ethernet address [ 15.237738] using random self ethernet address [ 15.242325] using random host ethernet address Ubuntu 20.04.6 LTS zme-encr ttyTCU0 zme-encr login: zme (automatic login) Welcome to Ubuntu 20.04.6 LTS (GNU/Linux 5.10.216-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/pro This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. Last login: Thu Jan 1 00:00:40 UTC 1970 on tty1 To run a command as administrator (user "root"), use "sudo ". See "man sudo_root" for details.